We've observed too long probe time with Coffee Lake (CFL) machines,
and the likely cause is some communication problem between the
HD-audio controller and the codec chips. While the controller expects
an IRQ wakeup for each codec response, it seems sometimes missing, and
it takes one second for the controller driver to time out and read the
response in the polling mode.
Although we aren't sure about the real culprit yet, in this patch, we
put a workaround by forcing the polling mode as default for CFL
machines; the polling mode itself isn't too heavy, and much better
than other workarounds initially suggested (e.g. disabling
power-save), at least.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=199007
Fixes: e79b0006c4 ("ALSA: hda - Add Coffelake PCI ID")
Reported-and-tested-by: Hui Wang <hui.wang@canonical.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Due to missing information in Hardware manual, current
implementation doesn't read ECCSTAT0 and ECCSTAT1 registers
for IFC 2.0.
Add support to read ECCSTAT0 and ECCSTAT1 registers during
ecccheck for IFC 2.0.
Fixes: 656441478e ("mtd: nand: ifc: Fix location of eccstat registers for IFC V1.0")
Cc: stable@vger.kernel.org # v3.18+
Signed-off-by: Jagdish Gediya <jagdish.gediya@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
In order to make sure compiler flag detection for ARM works
correctly the no-integrated-as flags need to be set before
including the arch specific Makefile.
Fixes: cfe17c9bbe ("kbuild: move cc-option and cc-disable-warning after incl. arch Makefile")
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Number of ECC status registers i.e. (ECCSTATx) has been increased in IFC
version 2.0.0 due to increase in SRAM size. This is causing eccstat
array to over flow.
So, replace eccstat array with u32 variable to make it fail-safe and
independent of number of ECC status registers or SRAM size.
Fixes: bccb06c353 ("mtd: nand: ifc: update bufnum mask for ver >= 2.0.0")
Cc: stable@vger.kernel.org # 3.18+
Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Signed-off-by: Jagdish Gediya <jagdish.gediya@nxp.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Some filesystems have timestamps with coarse precision that may allow
for a recently built object file to have the same timestamp as the
updated time on one of its dependency files. When that happens, the
object file doesn't get rebuilt as it should.
This is especially the case on filesystems that don't have sub-second
time precision, such as ext3 or Ext4 with 128B inodes.
Let's prevent that by making sure updated dependency files have a newer
timestamp than the first file we created (i.e. autoksyms.h.tmpnew).
Reported-by: Thomas Lindroth <thomas.lindroth@gmail.com>
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Tested-by: Thomas Lindroth <thomas.lindroth@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
As per the IFC hardware manual, Most significant 2 bytes in
nand_fsr register are the outcome of NAND READ STATUS command.
So status value need to be shifted and aligned as per the nand
framework requirement.
Fixes: 82771882d9 ("NAND Machine support for Integrated Flash Controller")
Cc: stable@vger.kernel.org # v3.18+
Signed-off-by: Jagdish Gediya <jagdish.gediya@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
The blackfin architecture is getting removed, so this driver
has become obsolete.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
When there is only a single erase block, the cross erase test
does not report sensible errors. Warn in case there is only
a single erase block instead of executing the test.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Use %*ph format to print small buffer as hex string.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Antonio Cardace <anto.cardace@gmail.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
MTD users are no longer checking erase_info->state to determine if the
erase operation failed or succeeded. Moreover, mtd_erase_callback() is
now a NOP.
We can safely get rid of all mtd_erase_callback() calls and all
erase_info->state assignments. While at it, get rid of the
erase_info->state field, all MTD_ERASE_XXX definitions and the
mtd_erase_callback() function.
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Richard Weinberger <richard@nod.at>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Bert Kenward <bkenward@solarflare.com>
---
Changes in v2:
- Address a few coding style issues (reported by Miquel)
- Remove comments that are no longer valid (reported by Miquel)
This patch adds support to detect ICL, slice, subslice and EU fuse
settings.
Add addresses for ICL 11 slice, subslice and EU fuses registers.
These register addresses are the same as previous platforms but the
format and / or the meaning of the information is different. Therefore
Gen11 defines for these registers are added.
Bspec: 9731
Bspec: 20643
Bspec: 20673
v2: Update fusing information storage after introducing the new query
uAPI (Lionel)
v3 (Oscar):
- The maximum number of slices in ICL 11 is 1
- The subslice disable fuse can potentially store information in
all bits
- GEN_MAX_SUBSLICES has to be increased to 8
- Don't trust the slice enabled fuse outside the max number of
expected slices
- Indentation fix and some reordering and renaming of local
variables
v4: Use single space after Cc tag
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Kelvin Gardiner <kelvin.gardiner@intel.com>
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1521575121-9577-1-git-send-email-oscar.mateo@intel.com
Replace drm_gem_object_reference/unreference function with *_get/put()
suffixes, because it is shorter and consistent with the kernel
kref_get/put() functions. The following Coccinelle script was used:
@@
expression e;
@@
(
-drm_gem_object_reference(e);
+drm_gem_object_get(e);
|
-drm_gem_object_unreference(e);
+drm_gem_object_put(e);
|
-drm_gem_object_unreference_unlocked(e);
+drm_gem_object_put_unlocked(e);
)
Signed-off-by: Santha Meena Ramamoorthy <santhameena13@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1521570567-22519-1-git-send-email-santhameena13@gmail.com
OR'ing in 0x40 before a memcpy() to overwrite the value doesn't
do much good - flip the order of operations are reported and
tested by Jouni.
Fixes: cb1a5bae56 ("mac80211_hwsim: add permanent mac address option for new radios")
Reported-by: Jouni Malinen <j@w1.fi>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
DC takes channel count to mean the actual count. cea_sad's channels
represent it as number of channels - 1.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
This is still a leftover from early atomic brinup days.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Switch the order of parameters being set for depth
and mode of truncation, as it previously was not correct
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The truncation isn't being programmed if the truncation
depth is set to 2, it causes an issue with dce11.2 asic
using 6bit eDP panel. It required to truncate 12:10 in order to
perform spatial dither 10:6.
This change will allow 12:10 truncation to be enabled.
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since we are not getting the GPIO from any platform data and global
GPIO numberspace, we simply get the named "extcon" GPIO directly from
the device. Cut away "active low" since GPIO descriptors already know
if the line is active high or low. Simplify a bit with a
struct device *dev helper variable in probe() and cut the complex
init() function.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
This moves the platform data settings from the platform data
struct and into the state container, saving some unnecessary
references and simplifying things a bit.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
[cw00.choi: Add FIXME comment of extcon_id]
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Nothing in the entire kernel #includes <linux/extcon/extcon-gpio.h>
so move the platform data declaration inside of the driver.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
The commit
70216fd937 ("extcon: int3496: Set the id pin to direction-input if necessary")
introduced a workaround for incorrect IoRestriction mode in ACPI table.
Now, when GPIO ACPI library does it in generic way, see the commit
1b2ca32ab0 ("gpiolib: acpi: Introduce NO_RESTRICTION quirk")
for the details, just set an appropriate quirk flag instead.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Sometimes (firmware bug?) the V5 boost GPIO is not configured as output
by the BIOS, leading to the 5V boost convertor being permanently on,
Explicitly set the direction and drv flags rather then inheriting them
from the firmware to fix this.
Fixes: 585cb239f4 ("extcon: intel-cht-wc: Disable external 5v boost ...")
Cc: stable@vger.kernel.org
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
when set pp table
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
caused by
'commit ca82cec868d1 ("drm/amd/pp: Simplified the avfs btc state on smu7")'
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
caused by
'commit 83e3c4615872 ("drm/amdgpu: Remove wrapper layer of smu ip functions")'
BUG: unable to handle kernel NULL pointer dereference at 00000000000005d8
[ 313.241459] IP: ci_dpm_read_sensor+0x37/0xf0 [amdgpu]
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
By moving amdgpu_irq_disable_all earlier in the sequence
fixes an issue with disabling pflip interrupts:
*ERROR* dal_irq_service_dummy_ack: called for non-implemented irq source
Earlier patch fixed a memory corruption and revealed irq
warnings.This way it seems to be there no obvious issues
with unloading the module.
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Disable irq on devices before destroying them. That prevents
use-after-free memory access when unloading the driver.
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This change fixes the deadlock when unloading the driver with displays
connected.
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The offset inside the page wasn't included in the copy call meaning
the start of the page was being read/written instead.
Reported-by: Jay Cornwall <Jay.Cornwall@amd.com>
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
PCIE_INDEX2/DATA2 pair will be used for smn register accessing since from vega.
PCIE_INDEX/DATA pair should be reserved for smu
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Need to be able to query the VCN firmware version from
userspace to determine supported features, etc.
Reviewed-by: Huang Rui <ray.huang@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* Fix sparse warnings from omapdrm
* HPD support for DVI connector
* Big cleanup to remove static variables
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=YdNo
-----END PGP SIGNATURE-----
Merge tag 'omapdrm-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux into drm-next
omapdrm patches for v4.17
* Fix sparse warnings from omapdrm
* HPD support for DVI connector
* Big cleanup to remove static variables
* tag 'omapdrm-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (69 commits)
drm/omap: fix compile error when DPI is disabled
drm/omap: fix compile error when debugfs is disabled
drm: omapdrm: displays: panel-dsi-cm: Fix field access before set
drm/omap: cleanup color space conversion
drm/omap: Allow HDMI audio setup even if we do not have video configured
drm/omap: fix maximum sizes
drm/omap: add writeback funcs to dispc_ops
drm/omap: fix scaling limits for WB
drm/omap: fix WB height with interlace
drm/omap: fix WBDELAYCOUNT with interlace
drm/omap: fix WBDELAYCOUNT for HDMI
drm/omap: set WB channel-in in wb_setup()
drm/omap: Add pclk setting case when channel is DSS_WB
drm/omap: dispc: disp_wb_setup to check return code
drm/omap: remove leftover enums
dt-bindings: display: add HPD gpio to DVI connector
drm/omap: add HPD support to connector-dvi
drm/omap: Init fbdev emulation only when we have displays
drm/omap: cleanup fbdev init/free
drm/omap: fix omap_fbdev_free() when omap_fbdev_create() wasn't called
...
Updates for 4.17. Sorry, running a bit late on this, didn't have a
chance to send pull-req before heading to linaro. But it has all been
in linux-next for a while. Main updates:
+ DSI updates from 10nm / SDM845
+ fix for race condition with a3xx/a4xx fence completion irq
+ some refactoring/prep work for eventual a6xx support (ie. when we have
a userspace)
+ a5xx debugfs enhancements
+ some mdp5 fixes/cleanups to prepare for eventually merging writeback
support (ie. when we have a userspace)
* tag 'drm-msm-next-2018-03-20' of git://people.freedesktop.org/~robclark/linux: (36 commits)
drm/msm: fix building without debugfs
drm/msm/mdp5: don't pre-reserve LM's if no dual-dsi
drm/msm/mdp5: add missing LM flush bits
drm/msm/mdp5: print a bit more of the atomic state
drm/msm/mdp5: rework CTL START signal handling
drm/msm: Trigger fence completion from GPU
drm/msm/dsi: fix direct caller of msm_gem_free_object()
drm/msm: strip out msm_fence_cb
drm/msm: rename mdp->disp
drm/msm/dsi: Fix potential NULL pointer dereference in msm_dsi_modeset_init
drm/msm/adreno/a5xx_debugfs: fix potential NULL pointer dereference
drm/msm/dsi: Get byte_intf_clk only for versions that need it
drm/msm/adreno: Use generic function to load firmware to a buffer object
drm/msm/adreno: Define a list of firmware files to load per target
drm/msm/adreno: Rename gpmufw to powerfw
drm/msm: Pass the correct aperture end to drm_mm_init
drm/msm/gpu: Set number of clocks to 0 if the list allocation fails
drm/msm: Replace gem_object deprecated functions
drm/msm/hdmi: fix semicolon.cocci warnings
drm/msm/mdp5: Fix trailing semicolon
...
This fixes mmap() for fbdev devices by providing a custom implementation
based on the KMS variant. This is a fairly exotic case these days, hence
why it is not flagged for stable.
There is also support for dedicating one of the overlay planes to serve
as a hardware cursor on older Tegra that did support hardware cursors
but not RGBA formats for it.
Planes will now also export the IN_FORMATS property by supporting the
various block-linear tiling modifiers for RGBA pixel formats.
Other than that, there's a bit of cleanup of DMA API abuse, use of the
private object infrastructure for global state (rather than subclassing
atomic state objects) and an implementation of ->{begin,end}_cpu_access
callbacks for PRIME exported buffers, which allow users to perform cache
maintenance on these buffers.
-----BEGIN PGP SIGNATURE-----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=gOLI
-----END PGP SIGNATURE-----
Merge tag 'drm/tegra/for-4.17-rc1' of git://anongit.freedesktop.org/tegra/linux into drm-next
drm/tegra: Changes for v4.17-rc1
This fixes mmap() for fbdev devices by providing a custom implementation
based on the KMS variant. This is a fairly exotic case these days, hence
why it is not flagged for stable.
There is also support for dedicating one of the overlay planes to serve
as a hardware cursor on older Tegra that did support hardware cursors
but not RGBA formats for it.
Planes will now also export the IN_FORMATS property by supporting the
various block-linear tiling modifiers for RGBA pixel formats.
Other than that, there's a bit of cleanup of DMA API abuse, use of the
private object infrastructure for global state (rather than subclassing
atomic state objects) and an implementation of ->{begin,end}_cpu_access
callbacks for PRIME exported buffers, which allow users to perform cache
maintenance on these buffers.
* tag 'drm/tegra/for-4.17-rc1' of git://anongit.freedesktop.org/tegra/linux:
drm/tegra: prime: Implement ->{begin,end}_cpu_access()
drm/tegra: gem: Map pages via the DMA API
drm/tegra: hub: Use private object for global state
drm/tegra: fb: Properly support linear modifier
drm/tegra: plane: Support format modifiers
drm/tegra: dc: Dedicate overlay plane to cursor on older Tegra's
drm/tegra: plane: Make tegra_plane_get_overlap_index() static
drm/tegra: fb: Implement ->fb_mmap() callback
drm/tegra: gem: Make __tegra_gem_mmap() available more widely
drm/tegra: gem: Reshuffle declarations
I have accumulated some patches as we went through some internal testing
for mali-dp and I was waiting for the YUV2RGB patches to land in your
tree.
* 'for-upstream/mali-dp' of git://linux-arm.org/linux-ld:
drm: mali-dp: Add YUV->RGB conversion support for video layers
drm: mali-dp: Turn off CRTC vblank when removing module.
drm: arm: malidp: Use drm_atomic_helper_shutdown() to disable planes on removal
drm: arm: malidp: Don't destroy planes manually in error handlers
drm/mali-dp: Fix malidp_atomic_commit_hw_done() for event sending.
drm/arm/malidp: Disable pixel alpha blending for colors that do not have alpha
drm: mali-dp: Fix bug on scaling with rotation
drm/mali-dp: Don't enable scaling engine for planes that only rotate.
drm: mali-dp: Uninitialized variable in malidp_se_check_scaling()
drm/mali-dp: Align pitch size to be multiple of bus burst read size.
drm/mali-dp: Rotated planes need a larger pitch size.
. '#sound-dai-cells' property is required to describe link between
the HDMI IP block and the SoC's audio subsystem and Exynos SoC device
tree files already have this property but we missed its description.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Y79z
-----END PGP SIGNATURE-----
Merge tag 'exynos-drm-fixes-for-v4.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes
Add a device tree property description for hdmi device node
. '#sound-dai-cells' property is required to describe link between
the HDMI IP block and the SoC's audio subsystem and Exynos SoC device
tree files already have this property but we missed its description.
* tag 'exynos-drm-fixes-for-v4.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos:
dt-bindings: exynos: Document #sound-dai-cells property of the HDMI node
This contains two small fixes for the alpha blending support that was
merged into v4.16-rc1 and a fix for connector reference leaks caused by
the fact that display pipelines are no longer automatically disabled if
the framebuffer is removed.
Furthermore this contains a fix for a crash on IOMMU detach at driver
unbind time and a regulator enable/disable unbalance fix.
-----BEGIN PGP SIGNATURE-----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=iuUO
-----END PGP SIGNATURE-----
Merge tag 'drm/tegra/for-4.16-rc7-fixes' of git://anongit.freedesktop.org/tegra/linux into drm-fixes
drm/tegra: Fixes for v4.16-rc7
This contains two small fixes for the alpha blending support that was
merged into v4.16-rc1 and a fix for connector reference leaks caused by
the fact that display pipelines are no longer automatically disabled if
the framebuffer is removed.
Furthermore this contains a fix for a crash on IOMMU detach at driver
unbind time and a regulator enable/disable unbalance fix.
* tag 'drm/tegra/for-4.16-rc7-fixes' of git://anongit.freedesktop.org/tegra/linux:
drm/tegra: Shutdown on driver unbind
drm/tegra: dsi: Don't disable regulator on ->exit()
drm/tegra: dc: Detach IOMMU group from domain only once
drm/tegra: plane: Correct legacy blending
drm/tegra: plane: Fix RGB565 format on older Tegra
On Spreadtrum platform, we use one PMIC watchdog to reset the whole system
with loading one suitable timeout value (usually 50ms) for the watchdog.
In theory, we should implement the restart function in drivers/power/reset
subsystem to access the PMIC watchdog with regmap. When restart the system,
other cores will be stopped by IPI, but if other cores were accessing PMIC
with holding the regmap mutex lock, that will cause dead-lock issue if we
try to access the PMIC watchdog with regmap to restart the whole system.
Thus we can implement the restart function in ADI driver to avoid this
issue.
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver does not select all the codec drivers that needs.
Fix it by selecting the analog and HDMI codecs.
Cc: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.co.uk>
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the correct compatible string in the example devicetree
snippet, which was probably overlooked.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.co.uk>
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit 24069b589b ("ASoC: hdmi-codec: remove multi detection support")
changed the dai_name for the HDMI Codec, breaking the rk3288_hdmi_analog
driver, which fails to register with a:
rk3288-snd-hdmi-analog sound: ASoC: CODEC DAI hdmi-hifi.0 not registered
This commit fixes the dai_name, fixing the issue.
Fixes: 24069b589b ("ASoC: hdmi-codec: remove multi detection support")
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.co.uk>
Signed-off-by: Mark Brown <broonie@kernel.org>
We can move the hardware spinlock protection into the ADI read/write
functions to simplify the sprd_adi_transfer_one() function. Moreover
this optimization can also help to access PMIC without considering
the hardware spinlock using sprd_adi_read/write() functions.
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
- Continued cleanup and restructuring of powerplay
- Fetch VRAM type from vbios rather than hardcoding for SOC15 asics
- Allow ttm to drop its backing store when drivers don't need it
- DC bandwidth calc updates
- Enable DC backlight control pre-DCE11 asics
- Enable DC on all supported asics
- DC Fixes for planes due to the way our hw is ordered vs what drm expects
- DC CTM/regamma fixes
- Misc cleanup and bug fixes
* 'drm-next-4.17' of git://people.freedesktop.org/~agd5f/linux: (89 commits)
amdgpu/dm: Default PRE_VEGA ASIC support to 'y'
drm/amd/pp: Remove the cgs wrapper for notify smu version on APU
drm/amd/display: fix dereferencing possible ERR_PTR()
drm/amd/display: Refine disable VGA
drm/amdgpu: Improve documentation of bo_ptr in amdgpu_bo_create_kernel
drm/radeon: Don't turn off DP sink when disconnected
drm/amd/pp: Rename file name cz_* to smu8_*
drm/amd/pp: Replace function/struct name cz_* with smu8_*
drm/amd/pp: Remove unneeded void * casts in cz_hwmgr.c/cz_smumgr.c
drm/amd/pp: Mv cz uvd/vce pg/dpm functions to cz_hwmgr.c
drm/amd/pp: Remove dead header file pp_asicblocks.h
drm/amd/pp: Delete dead code on cz_clockpowergating.c
drm/amdgpu: Call amdgpu_ucode_fini_bo in amd_powerplay.c
drm/amdgpu: Remove wrapper layer of smu ip functions
drm/amdgpu: Don't compared ip_block_type with ip_block_index
drm/amdgpu: Plus NULL function pointer check
drm/amd/pp: Move helper functions to smu_help.c
drm/amd/pp: Replace rv_* with smu10_*
drm/amd/pp: Fix function parameter not correct
drm/amd/pp: Add rv_copy_table_from/to_smc to smu backend function table
...