Highlights:
----------
-MCU:
- Add syscfg missing clock on stm32f429.
- MPU:
- STM32MP13:
- Add camera support on stm32mp135f-dk bord using DCMIPP and
GC2145 sensor.
- Document PWM output for stm32mp135f-dk
- Add goodix touchscreen support on stm32mp135f-dk board.
- Add new DH DHCOR / DHSBC board (Som + carrier board) based on
STM32MP135F SoC.
SOM part contains: STM32MP135F SoC, 512MB DDR2L RAM and
eMMC/SDIO wifi module.
The carrier boards embedds 2 RGMII ETH ports, USB-A,USB-C
and an extansion connector.
- Add Ethernet controller support on stm32mp135f-dk.
It uses LAN8742A PHY based on RMII.
- STMP32MP15:
- Rework Octavo OSD32MP1 split for USB phy.
- Add OP-TEE IRQ for asynchronous notification support.
It allows OP-TEE to trig Linux.
- STM32MP25:
- Add OP-TEE IRQ for asynchronous notification support.
It allows OP-TEE to trig Linux.
- Enable firewall for RCC.
- Add all U(s)ART nodes for stm32mp25.
- Add 3 power domains for low power modes.
- Add HPDMA support.
- Add Ethernet controller (ETH2) support on stm32mp257f-ev1.
It uses Realtek PHY based on RGMII.
- Add and enable SCMI regulator support.
-----BEGIN PGP SIGNATURE-----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=sjji
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmaL+KUACgkQYKtH/8kJ
UiehdRAAn8dwWo+MPfd7fRIxQrYm0SOiiFTC4j4LHNzCDQd7JV93p5FjYo3TpHAA
wXtKYqFDZ8rbxWca3say015iOkYvLmRWOXM9Zs19U6gpsoW0OeiJvQs0pnPYQdXL
ZJxL2YOn3nFfZ3IHxlTcyzoayX5uPZ/KJ/HE6ZLfMk8hCOdzPXoixH/WH1YQgXgc
0EXiSxVbthDb8XbSLF8mz4jZpW0neFwetskkjoUUUO4wbyUi53IThxShAMyyFnBf
ypoG1XTl1bD3DZFOrTQeILh+gR2Hg+EMttvqzooP8B/OAzHC6R/v0H92k3muE+FD
bH4PrFc7aYmV7NnZI61FJzAXjSLrZ8pRFkjyKbenGiSLN9De57pH8CVXC8yeoTzy
HKvk6E9VXmOh+KOwAXY+oQTHp4HMamWH8wFvOSf3nDNyW77u4q4g+Mh60uPeCek5
RlwO/qe+3aOZoem3KskZ4/68iUDftcs+4Ga9O3jceQi/EEjAhz6gV54dNYC9OYi2
VwouIqkS0JWJwH/1hfAgmbYhPdxfKds4kbAGFBjb9rsrf2okjeg/MY0NuZgtehqu
iJ2Q2wTfS8mpX+DbBRHZLXe/pxTiw83Ftkq/x0K8gAArfltJxbqzVuGec9aUdvJI
xyZrekj5MmsSsV0FpqBsgiHDG6GP9yPOy2zkMDYK6//qn+tyvFQ=
=EqEk
-----END PGP SIGNATURE-----
Merge tag 'stm32-dt-for-v6.11-1' of https://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into soc/dt
STM32 DT for v6.11, round 1
Highlights:
----------
-MCU:
- Add syscfg missing clock on stm32f429.
- MPU:
- STM32MP13:
- Add camera support on stm32mp135f-dk bord using DCMIPP and
GC2145 sensor.
- Document PWM output for stm32mp135f-dk
- Add goodix touchscreen support on stm32mp135f-dk board.
- Add new DH DHCOR / DHSBC board (Som + carrier board) based on
STM32MP135F SoC.
SOM part contains: STM32MP135F SoC, 512MB DDR2L RAM and
eMMC/SDIO wifi module.
The carrier boards embedds 2 RGMII ETH ports, USB-A,USB-C
and an extansion connector.
- Add Ethernet controller support on stm32mp135f-dk.
It uses LAN8742A PHY based on RMII.
- STMP32MP15:
- Rework Octavo OSD32MP1 split for USB phy.
- Add OP-TEE IRQ for asynchronous notification support.
It allows OP-TEE to trig Linux.
- STM32MP25:
- Add OP-TEE IRQ for asynchronous notification support.
It allows OP-TEE to trig Linux.
- Enable firewall for RCC.
- Add all U(s)ART nodes for stm32mp25.
- Add 3 power domains for low power modes.
- Add HPDMA support.
- Add Ethernet controller (ETH2) support on stm32mp257f-ev1.
It uses Realtek PHY based on RGMII.
- Add and enable SCMI regulator support.
* tag 'stm32-dt-for-v6.11-1' of https://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (31 commits)
arm64: dts: st: describe power supplies for stm32mp257f-ev1 board
arm64: dts: st: add scmi regulators on stm32mp25
regulator: Add STM32MP25 regulator bindings
ARM: dts: stm32: omit unused pinctrl groups from stm32mp13 dtb files
arm64: dts: st: enable Ethernet2 on stm32mp257f-ev1 board
arm64: dts: st: add eth2 pinctrl entries in stm32mp25-pinctrl.dtsi
arm64: dts: st: add ethernet1 and ethernet2 support on stm32mp25
arm64: dts: st: add HPDMA nodes on stm32mp251
ARM: dts: stm32: Add ethernet support for DH STM32MP13xx DHCOR DHSBC board
ARM: dts: stm32: order stm32mp13-pinctrl nodes
ARM: dts: stm32: add ethernet1 for STM32MP135F-DK board
ARM: dts: stm32: add ethernet1/2 RMII pins for STM32MP13F-DK board
ARM: dts: stm32: add ethernet1 and ethernet2 support on stm32mp13
ARM: dts: stm32: Document output pins for PWMs on stm32mp135f-dk
ARM: dts: stm32: OP-TEE async notif interrupt for ST STM32MP15x boards
ARM: dts: stm32: Missing clocks for stm32f429's syscfg.
ARM: dts: stm32: Add support for STM32MP13xx DHCOR SoM and DHSBC board
ARM: dts: stm32: Add pinmux nodes for DH electronics STM32MP13xx DHCOR SoM and DHSBC board
dt-bindings: arm: stm32: Add compatible string for DH electronics STM32MP13xx DHCOR DHSBC board
ARM: dts: stm32: osd32: move pwr_regulators to common
...
Link: https://lore.kernel.org/r/8f10bd29-d067-4060-89ff-2e1a605f3141@foss.st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This introduces new support for the Sony Xperia Z3 Compact, HTC One
(M8), Samsung Galaxy Tab 4 8.0 Wi-Fi, Samsung Galaxy Grand 2, and
Samsung Galaxy Note 3 devices.
The Motorola Moto G and Motorola Moto G 4G gains accelerometer and
magnetometer support, with the latter also getting framebuffer supplies
and a temperature sensor wired up.
The SMBB (charger block) is enabled across all MSM8x26 Lumia devices, as
this is used for USB state changes.
The operating mode for SDC regulator is set to HPM on Sony Xperia
"Shinano" family to avoid brownouts on uSD-cards.
The panel on LGE Nexus 5 is connected to the backlight, to make this
turn off on blanking.
MSM8974 is transitioned to use the mailbox-abstraction for invoking
PC interrupts on remote processors.
-----BEGIN PGP SIGNATURE-----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=oE6a
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=QlxS
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm32-for-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm Arm32 DeviceTree updates for v6.11
This introduces new support for the Sony Xperia Z3 Compact, HTC One
(M8), Samsung Galaxy Tab 4 8.0 Wi-Fi, Samsung Galaxy Grand 2, and
Samsung Galaxy Note 3 devices.
The Motorola Moto G and Motorola Moto G 4G gains accelerometer and
magnetometer support, with the latter also getting framebuffer supplies
and a temperature sensor wired up.
The SMBB (charger block) is enabled across all MSM8x26 Lumia devices, as
this is used for USB state changes.
The operating mode for SDC regulator is set to HPM on Sony Xperia
"Shinano" family to avoid brownouts on uSD-cards.
The panel on LGE Nexus 5 is connected to the backlight, to make this
turn off on blanking.
MSM8974 is transitioned to use the mailbox-abstraction for invoking
PC interrupts on remote processors.
* tag 'qcom-arm32-for-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (24 commits)
ARM: dts: qcom: qcom-msm8226-samsung-ms013g: Add initial device tree
ARM: dts: qcom: apq8064: drop incorrect ranges from QFPROM
ARM: dts: qcom: msm8926-motorola-peregrine: Add framebuffer supplies
ARM: dts: qcom: msm8926-motorola-peregrine: Update temperature sensor
ARM: dts: qcom: msm8926-motorola-peregrine: Add accelerometer, magnetometer, regulator
ARM: dts: qcom: msm8974: Use mboxes in smsm node
ARM: dts: qcom: msm8974-sony-shinano: increase load on l21 for sdhc2
ARM: dts: qcom: Add Sony Xperia Z3 Compact smartphone
ARM: dts: qcom: use generic node names for Adreno and QFPROM
ARM: dts: qcom: motorola-falcon: add accelerometer, magnetometer
ARM: dts: qcom: Add initial support for HTC One (M8)
ARM: dts: qcom: msm8974: Use mboxes properties for APCS
ARM: dts: qcom: mdm9615: drop #power-domain-cells property of GCC
ARM: dts: qcom: ipq8064: drop #power-domain-cells property of GCC
ARM: dts: qcom: ipq4019: drop #power-domain-cells property of GCC
ARM: dts: qcom: msm8960: drop #power-domain-cells property of GCC
ARM: dts: qcom: msm8660: drop #power-domain-cells property of GCC
ARM: dts: qcom: apq8064: drop #power-domain-cells property of GCC
ARM: dts: qcom: msm8974: Use proper compatible for APCS syscon
ARM: dts: qcom: msm8974-hammerhead: Update gpio hog node name
...
Link: https://lore.kernel.org/r/20240705032926.13333-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This includes a commit shared with the clk tree. This commit adds clock
and reset indices to the device tree binding, and thus is needed for
both the device tree and driver changes.
ARM64 device tree and binding-only changes
- Add LRADC (low resolution ADC for resistor network based keys) for H616 SoC
- Add cache information for A64, H6, and H616 SoCs
- Correct model names and descriptions for Pine64 boards
- Add GPADC (general purpose ADC) for H616 SoC
- Add ADC joysticks based on GPADC for anbernic-rg35xx-h board
- Add additional CPU OPPs for the H700 on top of existing H616 ones
- Enable DVFS for rg35xx boards
- Add IOMMU for H616 SoC
RISC-V device tree changes
- Add system LDOs to D1s/T113 SoC
- Add ClockworkPi and DevTerm device trees
-----BEGIN PGP SIGNATURE-----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=3vmg
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=Emn4
-----END PGP SIGNATURE-----
Merge tag 'sunxi-dt-for-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt
Allwinner SoC device tree changes for 6.11
This includes a commit shared with the clk tree. This commit adds clock
and reset indices to the device tree binding, and thus is needed for
both the device tree and driver changes.
ARM64 device tree and binding-only changes
- Add LRADC (low resolution ADC for resistor network based keys) for H616 SoC
- Add cache information for A64, H6, and H616 SoCs
- Correct model names and descriptions for Pine64 boards
- Add GPADC (general purpose ADC) for H616 SoC
- Add ADC joysticks based on GPADC for anbernic-rg35xx-h board
- Add additional CPU OPPs for the H700 on top of existing H616 ones
- Enable DVFS for rg35xx boards
- Add IOMMU for H616 SoC
RISC-V device tree changes
- Add system LDOs to D1s/T113 SoC
- Add ClockworkPi and DevTerm device trees
* tag 'sunxi-dt-for-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
riscv: dts: allwinner: Add ClockworkPi and DevTerm devicetrees
riscv: dts: allwinner: d1s-t113: Add system LDOs
arm64: dts: allwinner: h616: add IOMMU node
arm64: dts: allwinner: rg35xx: Enable DVFS CPU frequency scaling
arm64: dts: allwinner: h616: add additional CPU OPPs for the H700
arm64: dts: allwinner: anbernic-rg35xx-h: Add ADC joysticks
arm64: dts: allwinner: h616: Add GPADC device node
dt-bindings: clock: sun50i-h616-ccu: Add GPADC clocks
ARM: dts: sunxi: remove duplicated entries in makefile
arm64: dts: allwinner: Add cache information to the SoC dtsi for H616
arm64: dts: allwinner: Add cache information to the SoC dtsi for A64
arm64: dts: allwinner: Correct the model names for Pine64 boards
dt-bindings: arm: sunxi: Correct the descriptions for Pine64 boards
arm64: dts: allwinner: Add cache information to the SoC dtsi for H6
ARM: dts: sun50i: Add LRADC node
dt-bindings: input: sun4i-lradc-keys: Add H616 compatible
Link: https://lore.kernel.org/r/ZoQa8r1N8yi7FlPV@wens.tw
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- New board support: imx8mm-iot-gateway, imx93-9x9-qsb, imx95-19x19-evk,
imx8mp-tqma8mpql-mba8mp-ras314, etc.
- A series from Adam Ford that improves imx8mp-beacon-kit support by
fixing dtschema issues and enabling HDMI bridge HPD
- A set of changes from Alexander Stein that adds partitions subnode
to spi-nor
- A great number of changes from Frank Li that add audio, flexcan, gpmi
related devices for imx8dxl, imx8qm based boards
- A bunch of layerscape dtschema issue fixes from Frank Li
- A series from Krzysztof Kozlowski to use defines for interrupts
- A number of improvements on i.MX8MP DHCOM devices from Marek Vasut
- A couple of changes from Parthiban Nallathambi that add PCIe PHY and
RS232/RS485 overlays for phygate-tauri-l board
- A series from Shengjiu Wang that adds bt-sco and XCVR sound card
support for imx8mp-evk
- A series from Tim Harvey that fixes dt-schema warnings and adds DP83867
configuration for i.MX8M Venice devices
- Other random feature additions and improvments on various boards
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmaEB9sUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM50fQf+LLdjIw/Y2qL1nGtONR2ztD2pykGf
8EDXlEjYBKPgnEqm9Fx04KNlITG4rVZx8vPODTWqbgg/LMyxhoT5oc79Y3cgPU2N
+mLYEWWS4M5tCbBsPyM2eVGCGlL6ljU9oAzpCOjeKCWcoALfAKw0Ra0McSDcmnUW
numO5gynIJtMk8Vn7bxoOwbdNFWPY+egT9VQiWYz3SQzxND5nDfzO4sWNvZ8A5h2
6lScii47uZd4LOiZy9fijX2xxm8Hc4VXvJyiN+pNcWWlxc/tAzwvq28/xoZcUu90
pK9l3ZYyuUumKEaCc9up7BqNV3KuYpcodk7tufSzuqtSYnVenQU81xZUgA==
=JIHm
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=Orkt
-----END PGP SIGNATURE-----
Merge tag 'imx-dt64-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
i.MX arm64 device tree change for 6.11:
- New board support: imx8mm-iot-gateway, imx93-9x9-qsb, imx95-19x19-evk,
imx8mp-tqma8mpql-mba8mp-ras314, etc.
- A series from Adam Ford that improves imx8mp-beacon-kit support by
fixing dtschema issues and enabling HDMI bridge HPD
- A set of changes from Alexander Stein that adds partitions subnode
to spi-nor
- A great number of changes from Frank Li that add audio, flexcan, gpmi
related devices for imx8dxl, imx8qm based boards
- A bunch of layerscape dtschema issue fixes from Frank Li
- A series from Krzysztof Kozlowski to use defines for interrupts
- A number of improvements on i.MX8MP DHCOM devices from Marek Vasut
- A couple of changes from Parthiban Nallathambi that add PCIe PHY and
RS232/RS485 overlays for phygate-tauri-l board
- A series from Shengjiu Wang that adds bt-sco and XCVR sound card
support for imx8mp-evk
- A series from Tim Harvey that fixes dt-schema warnings and adds DP83867
configuration for i.MX8M Venice devices
- Other random feature additions and improvments on various boards
* tag 'imx-dt64-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (91 commits)
arm64: dts: imx8mp: Remove 'snps,rx-sched-sp'
arm64: dts: imx8mm-verdin: add TPM device
arm64: dts: imx8mp-evk: Add audio XCVR sound card
arm64: dts: imx8mp: Add audio XCVR device node
arm64: dts: imx8mp: Update Fast ethernet PHY MDIO addresses to match DH i.MX8MP DHCOM rev.200
arm64: dts: imx8mp: Do not reconfigure Audio PLL2 on DH i.MX8M Plus DHCOM SoM
arm64: dts: layerscape: rename b(q)man-portals to b(q)man-portals-bus
arm64: dts: fsl-ls1046a: rename thermal node name
arm64: dts: fsl-ls1043a: remove unused clk-name at watchdog node
arm64: dts: layerscape: rename aux_bus to aux-bus
arm64: dts: layerscape: change pcie interrupt order
arm64: dts: layerscape: rename node name "wdt" to "watchdog"
arm64: dts: layerscape: add #dma-cells for qdma
arm64: dts: layerscape: remove compatible string 'fsl,fman-xmdio' for fman3
arm64: dts: layerscape: replace node name 'nor' with 'flash'
arm64: dts: fsl-ls1012a: remove property 'snps,host-vbus-glitches'
arm64: dts: fsl-lx2160a: fix #address-cells for pinctrl-single
arm64: dts: layerscape: add platform special compatible string for gpio
arm64: dts: layerscape: rename node 'timer' as 'rtc'
arm64: dts: imx8qxp-mek: Pass memory-region to the DSP node
...
Link: https://lore.kernel.org/r/20240702142153.413061-4-shawnguo2@yeah.net
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- A few changes from Krzysztof Kozlowski to fix dtschema issues
- A series from Michael Walle to improve kontron-samx6i SoM support by
fixing various errors and add kontron-samx6i-ads2 board
- Add LVDS port data mapping for M53 Menlo board
- Convert NVMEM usage to layout syntax on MBA6 boards
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmaDyIAUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM5IYwgAgEqdpH/O+2tLqgx9AAoCWCoRhTZ7
U6zBOStI9fRUSyxhneF/Eu0jLJWWEZdpwAUoQlYdGShE23ZjqeE2mVEqmFyAKrcT
UDtuFIxROBWJ3Bi/QEL7YR+dTQoX9Y++evtF/UZJVwvDL6i5FY/XvBVzYmi0K2Jg
hFv6YXMNt9ijgnezg47TtWUNWXH/XeIKe+NYqgr71wD7y04bKLjG8Q8zRSC+21sH
j+eem6W5nixSGKU/0IS/hf8Fm7UTjftWhRnaLC0Ppu1ED3ycclLJkEXmgt9cWFF4
dPUGKcSQ2M5+z2iitD4eXGLpIqVieix4iNY5a+VQ4noHj4aO7sgMedI5tg==
=13Th
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=20wv
-----END PGP SIGNATURE-----
Merge tag 'imx-dt-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
i.MX ARM device tree change for 6.11:
- A few changes from Krzysztof Kozlowski to fix dtschema issues
- A series from Michael Walle to improve kontron-samx6i SoM support by
fixing various errors and add kontron-samx6i-ads2 board
- Add LVDS port data mapping for M53 Menlo board
- Convert NVMEM usage to layout syntax on MBA6 boards
* tag 'imx-dt-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: dts: imx6qdl-kontron-samx6i: add actual device trees
ARM: dts: imx6qdl-kontron-samx6i: remove wake-up-gpio property
ARM: dts: imx6qdl-kontron-samx6i: fix PCIe reset polarity
ARM: dts: imx6qdl-kontron-samx6i: fix node names
ARM: dts: imx6qdl-kontron-samx6i: add SDIO_PWR_EN support
ARM: dts: imx6qdl-kontron-samx6i: always enable eMMC
ARM: dts: imx6qdl-kontron-samx6i: fix product name
ARM: dts: imx6qdl-kontron-samx6i: fix SPI0 chip selects
ARM: dts: imx6qdl-kontron-samx6i: cleanup the PMIC node
ARM: dts: imx6qdl-kontron-samx6i: fix board reset
ARM: dts: imx6qdl-kontron-samx6i: fix PHY reset
ARM: dts: imx6qdl-kontron-samx6i: fix phy-mode
ARM: dts: nxp: imx6: convert NVMEM content to layout syntax
ARM: dts: e60k02: fix aliases for mmc
ARM: dts: imx: Add LVDS port data mapping on M53 Menlo
ARM: dts: imx28-tx28: drop redundant 'panel-name' property
ARM: dts: imx: drop redundant 'u-boot,panel-name' property
ARM: dts: imx6dl-aristainetos2_4: drop redundant 'power-on-delay' property
ARM: dts: imx: correct choice of panel native mode
ARM: dts: imx: align panel timings node name with dtschema
Link: https://lore.kernel.org/r/20240702142153.413061-3-shawnguo2@yeah.net
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Add compatible string for various new boards
- Drop Li Yang as maintainer for bindings as his email bounces
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmaDrjkUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM7C2wf9EEob++3U7fCtNiXlRDeNfDC4AqCz
2uak9/agAzHYXiePe9NbgY2DIwxaFj6CzjaXWp4TLQpp+663sG7A5YFvD7uhEwMM
5PFnK1O6UdKUc7uPYv3mAC7KZSB6i3jUjIGH+kYx7XFf33xppTMHU2jet91N60NW
a148jUz+ZEK6aFCmj1PbvFbDeq4gBuAx60ghET8ka0q2MYt7ZCfHc4exJAJNrAZo
zoQxYEcaSykN2xcsVqbZV4BpgJFQoi0AuLDOz9TnbYcIH6RuTS9IolL3P/70b+qG
AdNWy6bX8gNNQqN/kThOKn/Gx+p3DQPwX6pDgrUZq3/WwGThlNqzvcI8WQ==
=BZhu
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=9rI6
-----END PGP SIGNATURE-----
Merge tag 'imx-bindings-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
i.MX DT bindings for 6.11:
- Add compatible string for various new boards
- Drop Li Yang as maintainer for bindings as his email bounces
* tag 'imx-bindings-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
dt-bindings: arm: fsl: document Kontron SMARC-sAMX6i boards
dt-bindings: arm: add MBa8MP-RAS314 SBC
dt-bindings: arm: fsl: add i.MX93 9x9 QSB board
dt-bindings: arm: fsl: add i.MX95 19x19 EVK board
dt-bindings: arm: fsl: Document Compulab IOT-GATE-iMX8
dt-bindings: Drop Li Yang as maintainer for all bindings
Link: https://lore.kernel.org/r/20240702142153.413061-2-shawnguo2@yeah.net
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Few cleanups and improvements which were missed by their maintainers:
1. Add Krzysztof as odd-fixer for old ARM platforms: Alphascale, AXM
LSI, Moxa, TI Nspire and VT8500 (with Alexey Charkov).
2. VT8500: align node names with bindings (USB, panel timings).
3. Cirrus: align node names with bindings (panel timings).
4. TI Nspire: correct unit addresses, correct watchdog compatible and
properties while making it disabled (never tested).
5. Nuvoton, Aspeed: align node names with bindings (I2C).
IMPORTANT: At least for Aspeed it is known to affect some user-space
tools, because that user-space looks for specific node path via
/sys/firmware/devicetree. The /sys/firmware/devicetree is not the ABI
and any user-space relying on it:
- Prevents any changes in DTS, e.g. node renaming or moving,
changing unit addresses (re-arranging child bus addressing).
- Is using undocumented interface.
- Is neither reliable nor understandable.
6. TI OMAP and Davinci: align node names with bindings (panel timings),
drop incorrect property.
7. STI: document in bindings codec child to fix dtbs_checks.
-----BEGIN PGP SIGNATURE-----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=lqZd
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=gJI1
-----END PGP SIGNATURE-----
Merge tag 'dt-cleanup-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt into soc/dt
Minor improvements in ARM DTS for v6.11
Few cleanups and improvements which were missed by their maintainers:
1. Add Krzysztof as odd-fixer for old ARM platforms: Alphascale, AXM
LSI, Moxa, TI Nspire and VT8500 (with Alexey Charkov).
2. VT8500: align node names with bindings (USB, panel timings).
3. Cirrus: align node names with bindings (panel timings).
4. TI Nspire: correct unit addresses, correct watchdog compatible and
properties while making it disabled (never tested).
5. Nuvoton, Aspeed: align node names with bindings (I2C).
IMPORTANT: At least for Aspeed it is known to affect some user-space
tools, because that user-space looks for specific node path via
/sys/firmware/devicetree. The /sys/firmware/devicetree is not the ABI
and any user-space relying on it:
- Prevents any changes in DTS, e.g. node renaming or moving,
changing unit addresses (re-arranging child bus addressing).
- Is using undocumented interface.
- Is neither reliable nor understandable.
6. TI OMAP and Davinci: align node names with bindings (panel timings),
drop incorrect property.
7. STI: document in bindings codec child to fix dtbs_checks.
* tag 'dt-cleanup-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt:
ARM: dts: omap am5729-beagleboneai: drop unneeded ti,enable-id-detection
dt-bindings: soc: sti: st,sti-syscon: document codec node
ARM: dts: ti: align panel timings node name with dtschema
arm: dts: aspeed: Use standard 'i2c' bus node name
arm: dts: nuvoton: Use standard 'i2c' bus node name
MAINTAINERS: ARM: alphascale: add Krzysztof Kozlowski as maintainer
ARM: dts: nspire: Add full compatible for watchdog node
ARM: dts: nspire: Add unit name addresses to memory nodes
MAINTAINERS: ARM: nspire: add Krzysztof Kozlowski as maintainer
MAINTAINERS: ARM: vt8500: add Alexey and Krzysztof as maintainers
MAINTAINERS: ARM: axm: add Krzysztof Kozlowski as maintainer
MAINTAINERS: ARM: moxa: add Krzysztof Kozlowski as maintainer
ARM: dts: cirrus: align panel timings node name with dtschema
ARM: dts: vt8500: align panel timings node name with dtschema
ARM: dts: vt8500: replace "uhci" nodename with generic name "usb"
Link: https://lore.kernel.org/r/20240702065359.7378-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
1. Google GS101: Minor cleanup and add fake regulators to USB phy, to
satisfy dtbs_check. The PMIC providing these regulators is not yet
implemented.
2. Exynos850: Add True Random Number Generator.
-----BEGIN PGP SIGNATURE-----
iQJEBAABCgAuFiEE3dJiKD0RGyM7briowTdm5oaLg9cFAmaDnzkQHGtyemtAa2Vy
bmVsLm9yZwAKCRDBN2bmhouD1+DCEACQ4QFZWkBZimCpTOacg9GHBCHgcYgQ5OGS
Z7gOsDcSHUYBgSPmo5hEtt0Y3qalCNgQz914ozqkpCwlF2SZCpiTTrk7Eou86jQ/
VOUiG3k49Crw3QAzhAVW/xw4+tsFO5oRDL7Z06pPIfO5QjFF9Ass+mfW+aXIQ+X3
+jG7+ms4hY9n6X8+a4sCQ+E1TFo2L9cJp/AyMnBDGXYeRNs/o+lYLxggW8CzIRAz
jMRELQ/qyMgNupnZpALe4uxbNQ3M5/dgiwx3yV+8c5gx6YcgMBtsktI5b/X6Yu7W
Dfe9EFBmPYBdD0zSlM0tZBPzLkuvv9InV+NTRN5JlstVPeR0YIu1Qf3UfDP3ay1f
U6eXCu91XxGt+zGPCsjzVxKMll2HYb9VZ8NF5VvxWUHlk81cJ6aKJTUF2fBKJjbk
6FNFALncrX7RQagZW1wfq2cKMHsXvh86QQAwt9hihdsmOwwq3E9wKWqLxa6mak70
i1fYa18xBaFUsaxRgqWW7HPx1ma62P294lGsbSp6wS5nM0kaqfZkfFuh5Xw8mYpJ
Z+L86pnfT/f6I3ljqjm4rQ7bI697ZhG2P1snIhb0PjXuY18hGtv+bNVum02SF9aO
IimG55wSBvxHF9ZjvZplQfpbrvpy6uMc18hie/2DrsKQkX6xJL7RI2QH8HZyFlma
UKIc88whoA==
=Oc6g
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=SKUS
-----END PGP SIGNATURE-----
Merge tag 'samsung-dt64-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt
Samsung DTS ARM64 changes for v6.10
1. Google GS101: Minor cleanup and add fake regulators to USB phy, to
satisfy dtbs_check. The PMIC providing these regulators is not yet
implemented.
2. Exynos850: Add True Random Number Generator.
* tag 'samsung-dt64-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: dts: exynos850: Enable TRNG
arm64: dts: exynos: gs101-oriole: add placeholder regulators for USB phy
arm64: dts: exynos: gs101: reorder properties as per guidelines
Link: https://lore.kernel.org/r/20240702063514.6215-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This contains one patch that reworks the device tree structure for
Jetson Orin NX and Jetson Orin Nano, which are both within the same
family. This restructuring makes it easier to extend both platforms
in a consistent way in the future.
-----BEGIN PGP SIGNATURE-----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=+CSv
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=CUSX
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-6.11-arm64-dt' of https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt
arm64: tegra: Device tree changes for v6.11-rc1
This contains one patch that reworks the device tree structure for
Jetson Orin NX and Jetson Orin Nano, which are both within the same
family. This restructuring makes it easier to extend both platforms
in a consistent way in the future.
* tag 'tegra-for-6.11-arm64-dt' of https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: Restructure Orin NX/Nano device tree
Link: https://lore.kernel.org/r/20240628210818.3627404-3-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
These bindings will be used for the SCMI voltage domain.
Signed-off-by: Pascal Paillet <p.paillet@foss.st.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
stm32mp13-pinctrl.dtsi contains nearly all pinctrl groups collected from
all boards. Most of them end up unused by a board and only waste binary
space. Add /omit-if-no-ref/ to the groups to scrub the unused groups
from the dtbs.
Use the following regex to update the file and drop two useless newlines too:
s@^\t[^:]\+: [^ ]\+ {$@\t/omit-if-no-ref/\r&@
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
ETHERNET2 instance is connected to Realtek PHY in RGMII mode
Ethernet is SNSP IP with GMAC5 version.
Signed-off-by: Christophe Roullier <christophe.roullier@foss.st.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Add pinctrl entry related to ETH2 in stm32mp25-pinctrl.dtsi
ethernet2: RGMII with crystal.
Signed-off-by: Christophe Roullier <christophe.roullier@foss.st.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Both instances ethernet based on GMAC SNPS IP on stm32mp25.
GMAC IP version is SNPS 5.3
Signed-off-by: Christophe Roullier <christophe.roullier@foss.st.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
The High Performance Direct Memory Access (HPDMA) controller is used to
perform programmable data transfers between memory-mapped peripherals
and memories (or between memories) via linked-lists.
There are 3 instances of HPDMA on stm32mp251, using stm32-dma3 driver, with
16 channels per instance and with one interrupt per channel.
Channels 0 to 7 are implemented with a FIFO of 8 bytes.
Channels 8 to 11 are implemented with a FIFO of 32 bytes.
Channels 12 to 15 are implemented with a FIFO of 128 bytes.
Thanks to stm32-dma3 bindings, the user can ask for a channel with specific
FIFO size.
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Add ethernet support for the DH STM32MP13xx DHCOR DHSBC carrier board.
This carrier board is populated with two gigabit ethernet ports and two
Realtek RTL8211F PHYs, both are described in this DT patch.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Ethernet1: RMII with crystal
Ethernet2: RMII with no cristal, need "phy-supply" property to work,
today this property was managed by Ethernet glue, but should be present
and managed in PHY node. So I will push second Ethernet in next step.
PHYs used are SMSC (LAN8742A)
Signed-off-by: Christophe Roullier <christophe.roullier@foss.st.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Those pins are used for Ethernet 1 and 2 on STM32MP13F-DK board.
ethernet1: RMII with crystal.
ethernet2: RMII without crystal.
Add analog gpio pin configuration ("sleep") to manage power mode on
stm32mp13.
Signed-off-by: Christophe Roullier <christophe.roullier@foss.st.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Both instances ethernet based on GMAC SNPS IP on stm32mp13.
GMAC IP version is SNPS 4.20.
Signed-off-by: Christophe Roullier <christophe.roullier@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
To simplify identifying the pins where the PWM output is routed to,
add a comment to each PWM device about the respective pin on the
expansion connector.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Define the GIC interrupt (PPI 15) to be used on ST STM32MP15x boards
for OP-TEE async notif.
Signed-off-by: Etienne Carriere <etienne.carriere@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Without clock definition, SYSCFG will not work, EXTI interrupt for
port other than GPIOA will fail to operate.
Signed-off-by: Yanjun Yang <yangyj.ee@gmail.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
This stm32mp135f-dhcor-dhsbc board is a stack of DHCOR SoM based on
STM32MP135F SoC (900MHz / crypto capabilities) populated on DHSBC
carrier board.
The SoM contains the following peripherals:
- STPMIC (power delivery)
- 512MB DDR3L memory
- eMMC and SDIO WiFi module
The DHSBC carrier board contains the following peripherals:
- Two RGMII Ethernet ports
- USB-A Host port, USB-C peripheral port, USB-C power supply plug
- Expansion connector
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Samsung Galaxy Grand 2 is a phone based on MSM8226. It's similar to the
other Samsung devices based on MSM8226 with only a few minor differences.
The device trees contain initial support with:
- GPIO keys
- Regulator haptic
- SDHCI (internal and external storage)
- UART (on USB connector via the TI TSU6721 MUIC)
- Regulators
- Touchscreen
- Accelerometer
Signed-off-by: Raymond Hackley <raymondhackley@protonmail.com>
Reviewed-by: Luca Weiss <luca@lucaweiss.eu>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240630132859.2885-3-raymondhackley@protonmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
According to nxp,dwmac-imx.yaml, 'snps,rx-sched-sp' is not a valid
property.
Remove it from the imx8mp board devicetree files to avoid
dt-schema warnings:
... 'snps,tx-sched-sp' does not match any of the regexes
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
There is no direct mapping between QFPROM children and parent/SoC MMIO
bus, so 'ranges' property is not correct. Pointed by dtbs_check:
qcom-apq8064-cm-qs600.dtb: efuse@700000: Unevaluated properties are not allowed ('ranges' was unexpected)
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202406292139.yqPYyUfi-lkp@intel.com/
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240701062253.18149-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add TPM device found on Verdin iMX8M Mini PID4 0090 variant.
While adding the node, rename `pinctrl_pmic_tpm_ena` to
`pinctrl_tpm_spi_cs`.
Signed-off-by: Vitor Soares <vitor.soares@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add audio XCVR sound card, which supports SPDIF TX & RX,
eARC RX, ARC RX functions.
HDMI_HPD is shared with the HDMI module so use pinctrl_hog.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
XCVR (Audio Transceiver) is a on-chip functional module found
on i.MX8MP. It supports HDMI2.1 eARC, HDMI1.4 ARC and SPDIF.
The reset controller is provided by the audio block control driver.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The production DH i.MX8MP DHCOM SoM rev.200 uses updated PHY MDIO addresses
for the Fast ethernet PHYs. Update the base SoM DT to cater for this change.
Prototype rev.100 SoM was never publicly available and was manufactured in
limited series, anything currently available is rev.200 or newer, so it is
safe to update the DT this way.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The DH i.MX8M Plus DHCOM SoM uses Audio PLL2 to supply clock to CLKOUT2
output. Those clock are used to supply on-SoM TC9595 DSI-to-(e)DP bridge
with RefClk and must not be reconfigured, otherwise the bridge cannot
work correctly. Stop reconfiguring Audio PLL2 on this SoM.
Fixes: f560da940e ("arm64: dts: imx8mp: Initialize audio PLLs from audiomix subsystem")
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Rename b(q)man-portals to b(q)man-portals-bus to fix below CHECK_DTB
warnings.
arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dtb:
bman-portals@508000000: $nodename:0: 'bman-portals@508000000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$'
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add thermal subfix for thermal node to fix below CHECK_DTB warnings.
thermal-zones: '...' do not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-]{1,12}-thermal$'
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
clk-name is undocument property and never used in watchdog driver. Remove
it and fix below CHECK_DTB warning.
arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dtb: watchdog@2ad0000: Unevaluated properties are not allowed ('big-endian', 'clock-names' were unexpected)
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Rename aux_bus to aux-bus to fix below CHECK_DTBS warning.
arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dtb:
aux_bus: $nodename:0: 'aux_bus' does not match '^([a-z][a-z0-9\\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$'
from schema $id: http://devicetree.org/schemas/simple-bus.yam
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Change pcie interrupt order to fix below warning.
arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dtb: pcie@3400000: interrupt-names:0: 'pme' was expected
from schema $id: http://devicetree.org/schemas/pci/fsl,layerscape-pcie.yaml#
arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dtb: pcie@3400000: interrupt-names:1: 'aer' was expected
from schema $id: http://devicetree.org/schemas/pci/fsl,layerscape-pcie.yaml#
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Rename node name "wdt" to "watchdog" to fix below warning:
arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dtb:
wdt@c000000: $nodename:0: 'wdt@c000000' does not match '^(timer|watchdog)(@.*|-([0-9]|[1-9][0-9]+))?$
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add #dma-cells for qdma to fix below warning.
dma-controller@8380000: '#dma-cells' is a required property
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Fman3 should use 'fsl,fman-memac-mdio'. 'fsl,fman-xmdio' is for fman2.
Fix below CHECK_DTBS warning.
fman@1a00000: mdio@eb000:compatible: ['fsl,fman-memac-mdio', 'fsl,fman-xmdio'] is too long
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Replace node name 'nor' with 'flash' to fix below CHECK_DTBS warning.
nor@0,0: $nodename:0: 'nor@0,0' does not match '^(flash|.*sram|nand)(@.*)?$'
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Workaround already applied unconditional at
commit a6ba1e4531 ("usb: dwc3: apply snps,host-vbus-glitches workaround unconditionally")
Remove it to fix CHECK_DTBS warning:
usb@2f00000: Unevaluated properties are not allowed ('snps,host-vbus-glitches' was unexpected)
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Change #addres-cells to 1 and #size-cells to 0 to align binding doc
requiremement.
Fix below warning:
arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dtb: pinmux@70010012c: #address-cells:0:0: 1 was expected
from schema $id: http://devicetree.org/schemas/pinctrl/pinctrl-single.yaml#
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add platform special compatible string for all gpio controller to fix
below warning.
gpio@2300000: compatible: 'oneOf' conditional failed, one must be fixed:
['fsl,qoriq-gpio'] is too short
'fsl,qoriq-gpio' is not one of ['fsl,mpc5121-gpio', 'fsl,mpc5125-gpio', 'fsl,mpc8349-gpio', 'fsl,mpc8572-gpio', 'fsl,mpc8610-gpio', 'fsl,pq3-gpio']
'fsl,qoriq-gpio' is not one of ['fsl,ls1021a-gpio', 'fsl,ls1028a-gpio', 'fsl,ls1043a-gpio', 'fsl,ls1088a-gpio', 'fsl,ls2080a-gpio']
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
ftm_alarm is rtc. Correct the name as 'rtc' to fix DTB_CHECK warning.
timer@29d0000: $nodename:0: 'timer@29d0000' does not match '^rtc(@.*|-([0-9]|[1-9][0-9]+))?$'
from schema $id: http://devicetree.org/schemas/rtc/fsl,ls-ftm-alarm.yaml
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
