[ Upstream commit 9ffbbb435d ]
Introduce the BIO flag BIO_ZONE_WRITE_LOCKED to indicate that a BIO owns
the write lock of the zone it is targeting. This is the counterpart of
the struct request flag RQF_ZONE_WRITE_LOCKED.
This new BIO flag is reserved for now for zone write locking control
for device mapper targets exposing a zoned block device. Since in this
case, the lock flag must not be propagated to the struct request that
will be used to process the BIO, a BIO private flag is used rather than
changing the RQF_ZONE_WRITE_LOCKED request flag into a common REQ_XXX
flag that could be used for both BIO and request. This avoids conflicts
down the stack with the block IO scheduler zone write locking
(in mq-deadline).
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Acked-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e32ea44c7a ]
Including <linux/in.h> and <netinet/in.h> in the dependencies breaks
compilation of trinity due to multiple definitions. <linux/in.h> is only
used in <linux/icmp.h> to provide the definition of the struct in_addr,
but this can be substituted out by using the datatype __be32.
Signed-off-by: Andreas Roeseler <andreas.a.roeseler@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 86544c3de6 ]
Similar to the way in which of_mdiobus_register() has a fallback to the
non-DT based mdiobus_register() when CONFIG_OF is not set, we can create
a shim for the device-managed devm_of_mdiobus_register() which calls
devm_mdiobus_register() and discards the struct device_node *.
In particular, this solves a build issue with the qca8k DSA driver which
uses devm_of_mdiobus_register and can be compiled without CONFIG_OF.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit c9c9762d4d upstream.
After commit 07173c3ec2 ("block: enable multipage bvecs"), a bvec can
have multiple pages. But bio_will_gap() still assumes one page bvec while
checking for merging. If the pages in the bvec go across the
seg_boundary_mask, this check for merging can potentially succeed if only
the 1st page is tested, and can fail if all the pages are tested.
Later, when SCSI builds the SG list the same check for merging is done in
__blk_segment_map_sg_merge() with all the pages in the bvec tested. This
time the check may fail if the pages in bvec go across the
seg_boundary_mask (but tested okay in bio_will_gap() earlier, so those
BIOs were merged). If this check fails, we end up with a broken SG list
for drivers assuming the SG list not having offsets in intermediate pages.
This results in incorrect pages written to the disk.
Fix this by returning the multi-page bvec when testing gaps for merging.
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: Pavel Begunkov <asml.silence@gmail.com>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Jeffle Xu <jefflexu@linux.alibaba.com>
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org
Fixes: 07173c3ec2 ("block: enable multipage bvecs")
Signed-off-by: Long Li <longli@microsoft.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/1623094445-22332-1-git-send-email-longli@linuxonhyperv.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 40445fd2c9 upstream.
As per the FC-GS-5 specification, attribute lengths of node_name and
manufacturer should in range of "4 to 64 Bytes" only.
Link: https://lore.kernel.org/r/20210603101404.7841-2-jhasan@marvell.com
Fixes: e721eb0616 ("scsi: scsi_transport_fc: Match HBA Attribute Length with HBAAPI V2.0 definitions")
CC: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Javed Hasan <jhasan@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 6acfb5ba15 ]
Since commit d6995da311 ("hugetlb: use page.private for hugetlb specific
page flags") converts page.private for hugetlb specific page flags. We
should use hugetlb_page_subpool() to get the subpool pointer instead of
page_private().
This 'could' prevent the migration of hugetlb pages. page_private(hpage)
is now used for hugetlb page specific flags. At migration time, the only
flag which could be set is HPageVmemmapOptimized. This flag will only be
set if the new vmemmap reduction feature is enabled. In addition,
!page_mapping() implies an anonymous mapping. So, this will prevent
migration of hugetb pages in anonymous mappings if the vmemmap reduction
feature is enabled.
In addition, that if statement checked for the rare race condition of a
page being migrated while in the process of being freed. Since that check
is now wrong, we could leak hugetlb subpool usage counts.
The commit forgot to update it in the page migration routine. So fix it.
[songmuchun@bytedance.com: fix compiler error when !CONFIG_HUGETLB_PAGE reported by Randy]
Link: https://lkml.kernel.org/r/20210521022747.35736-1-songmuchun@bytedance.com
Link: https://lkml.kernel.org/r/20210520025949.1866-1-songmuchun@bytedance.com
Fixes: d6995da311 ("hugetlb: use page.private for hugetlb specific page flags")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Reported-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Tested-by: Anshuman Khandual <anshuman.khandual@arm.com> [arm64]
Cc: Oscar Salvador <osalvador@suse.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e6be37b2e7 ]
Since commit 99cb0dbd47 ("mm,thp: add read-only THP support for
(non-shmem) FS"), read-only THP file mapping is supported. But it forgot
to add checking for it in transparent_hugepage_enabled(). To fix it, we
add checking for read-only THP file mapping and also introduce helper
transhuge_vma_enabled() to check whether thp is enabled for specified vma
to reduce duplicated code. We rename transparent_hugepage_enabled to
transparent_hugepage_active to make the code easier to follow as suggested
by David Hildenbrand.
[linmiaohe@huawei.com: define transhuge_vma_enabled next to transhuge_vma_suitable]
Link: https://lkml.kernel.org/r/20210514093007.4117906-1-linmiaohe@huawei.com
Link: https://lkml.kernel.org/r/20210511134857.1581273-4-linmiaohe@huawei.com
Fixes: 99cb0dbd47 ("mm,thp: add read-only THP support for (non-shmem) FS")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.ibm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: William Kucharski <william.kucharski@oracle.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b2bd53f18b ]
Patch series "Cleanup and fixup for huge_memory:, v3.
This series contains cleanups to remove dedicated macro and remove
unnecessary tlb_remove_page_size() for huge zero pmd. Also this adds
missing read-only THP checking for transparent_hugepage_enabled() and
avoids discarding hugepage if other processes are mapping it. More
details can be found in the respective changelogs.
Thi patch (of 5):
Rewrite the pgoff checking logic to remove macro HPAGE_CACHE_INDEX_MASK
which is only used here to simplify the code.
Link: https://lkml.kernel.org/r/20210511134857.1581273-1-linmiaohe@huawei.com
Link: https://lkml.kernel.org/r/20210511134857.1581273-2-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: William Kucharski <william.kucharski@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.ibm.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 23d6fefbb3 ]
Commit 0ab710458d ("scsi: iscsi: Perform connection failure entirely in
kernel space") has the following regressions/bugs that this patch fixes:
1. It can return cmds to upper layers like dm-multipath where that can
retry them. After they are successful the fs/app can send new I/O to the
same sectors, but we've left the cmds running in FW or in the net layer.
We need to be calling ep_disconnect if userspace is not up.
This patch only fixes the issue for offload drivers. iscsi_tcp will be
fixed in separate commit because it doesn't have a ep_disconnect call.
2. The drivers that implement ep_disconnect expect that it's called before
conn_stop. Besides crashes, if the cleanup_task callout is called before
ep_disconnect it might free up driver/card resources for session1 then they
could be allocated for session2. But because the driver's ep_disconnect is
not called it has not cleaned up the firmware so the card is still using
the resources for the original cmd.
3. The stop_conn_work_fn can run after userspace has done its recovery and
we are happily using the session. We will then end up with various bugs
depending on what is going on at the time.
We may also run stop_conn_work_fn late after userspace has called stop_conn
and ep_disconnect and is now going to call start/bind conn. If
stop_conn_work_fn runs after bind but before start, we would leave the conn
in a unbound but sort of started state where IO might be allowed even
though the drivers have been set in a state where they no longer expect
I/O.
4. Returning -EAGAIN in iscsi_if_destroy_conn if we haven't yet run the in
kernel stop_conn function is breaking userspace. We should have been doing
this for the caller.
Link: https://lore.kernel.org/r/20210525181821.7617-8-michael.christie@oracle.com
Fixes: 0ab710458d ("scsi: iscsi: Perform connection failure entirely in kernel space")
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9e5fe17008 ]
Subsequent commits allow the kernel to do ep_disconnect. In that case we
will have to get a proper refcount on the ep so one thread does not delete
it from under another.
Link: https://lore.kernel.org/r/20210525181821.7617-7-michael.christie@oracle.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 891e2639de ]
During ep_disconnect we have been doing iscsi_suspend_tx/queue to block new
I/O but every driver except cxgbi and iscsi_tcp can still get I/O from
__iscsi_conn_send_pdu() if we haven't called iscsi_conn_failure() before
ep_disconnect. This could happen if we were terminating the session, and
the logout timed out before it was even sent to libiscsi.
Fix the issue by adding a helper which reverses the bind_conn call that
allows new I/O to be queued. Drivers implementing ep_disconnect can use this
to make sure new I/O is not queued to them when handling the disconnect.
Link: https://lore.kernel.org/r/20210525181821.7617-3-michael.christie@oracle.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8dea228b17 ]
The samples buffer is passed to iio_push_to_buffers_with_timestamp()
which requires a buffer aligned to 8 bytes as it is assumed that
the timestamp will be naturally aligned if present.
Fixes tag is inaccurate but prior to that likely manual backporting needed
(for anything before 4.18) Earlier than that the include file to fix is
drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.h:
commit 974e6f02e2 ("iio: cros_ec_sensors_core: Add common functions
for the ChromeOS EC Sensor Hub.") present since kernel stable 4.10.
(Thanks to Gwendal for tracking this down)
Fixes: 5a0b8cb466 ("iio: cros_ec: Move cros_ec_sensors_core.h in /include")
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Gwendal Grignou <gwendal@chromium.org
Link: https://lore.kernel.org/r/20210501171352.512953-7-jic23@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fade56410c ]
Commit 14972cbd34 ("net: lwtunnel: Handle fragmentation") moved
fragmentation logic away from lwtunnel by carry encap headroom and
use it in output MTU calculation. But the forwarding part was not
covered and created difference in MTU for output and forwarding and
further to silent drops on ipv4 forwarding path. Fix it by taking
into account lwtunnel encap headroom.
The same commit also introduced difference in how to treat RTAX_MTU
in IPv4 and IPv6 where latter explicitly removes lwtunnel encap
headroom from route MTU. Make IPv4 version do the same.
Fixes: 14972cbd34 ("net: lwtunnel: Handle fragmentation")
Suggested-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Vadim Fedorenko <vfedorenko@novek.ru>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c9ed0a7077 ]
These command do have variable length and the length can go up to 251,
so this changes the struct to not use a fixed size and then when
creating the PDU only the actual length of the data send to the
controller.
Fixes: a0fb3726ba ("Bluetooth: Use Set ext adv/scan rsp data if controller supports")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1f7fe51211 ]
The key length used when offloading macsec to Ethernet or PHY drivers
was set to MACSEC_KEYID_LEN (16), which is an issue as:
- This was never meant to be the key length.
- The key length can be > 16.
Fix this by using MACSEC_MAX_KEY_LEN to store the key (the max length
accepted in uAPI) and secy->key_len to copy it.
Fixes: 3cf3227a21 ("net: macsec: hardware offloading infrastructure")
Reported-by: Lior Nahmanson <liorna@nvidia.com>
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 89837eb4b2 ]
The spin_trylock() was assumed to contain the implicit
barrier needed to ensure the correct ordering between
STATE_MISSED setting/clearing and STATE_MISSED checking
in commit a90c57f2ce ("net: sched: fix packet stuck
problem for lockless qdisc").
But it turns out that spin_trylock() only has load-acquire
semantic, for strongly-ordered system(like x86), the compiler
barrier implicitly contained in spin_trylock() seems enough
to ensure the correct ordering. But for weakly-orderly system
(like arm64), the store-release semantic is needed to ensure
the correct ordering as clear_bit() and test_bit() is store
operation, see queued_spin_lock().
So add the explicit barrier to ensure the correct ordering
for the above case.
Fixes: a90c57f2ce ("net: sched: fix packet stuck problem for lockless qdisc")
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2f99619820 ]
Fix a missing validation of a Tx descriptor when executing in skb mode
and the umem is in unaligned mode. A descriptor could point to a
buffer straddling the end of the umem, thus effectively tricking the
kernel to read outside the allowed umem region. This could lead to a
kernel crash if that part of memory is not mapped.
In zero-copy mode, the descriptor validation code rejects such
descriptors by checking a bit in the DMA address that tells us if the
next page is physically contiguous or not. For the last page in the
umem, this bit is not set, therefore any descriptor pointing to a
packet straddling this last page boundary will be rejected. However,
the skb path does not use this bit since it copies out data and can do
so to two different pages. (It also does not have the array of DMA
address, so it cannot even store this bit.) The code just returned
that the packet is always physically contiguous. But this is
unfortunately also returned for the last page in the umem, which means
that packets that cross the end of the umem are being allowed, which
they should not be.
Fix this by introducing a check for this in the SKB path only, not
penalizing the zero-copy path.
Fixes: 2b43470add ("xsk: Introduce AF_XDP buffer allocation API")
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Björn Töpel <bjorn@kernel.org>
Link: https://lore.kernel.org/bpf/20210617092255.3487-1-magnus.karlsson@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c586f53ae1 ]
Remove the PLL clock gates as the allowing to gate the sys1_pll_266m breaks
the uSDHC module which is sporadically unable to enumerate devices after
this change. Also it makes AMP clock management harder with no obvious
benefit to Linux, so just revert the change.
Link: https://lore.kernel.org/r/20210528180135.1640876-1-l.stach@pengutronix.de
Fixes: b04383b6a5 ("clk: imx8mq: Define gates for pll1/2 fixed dividers")
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9c5eee0afc ]
Currently vlan modification action checks existence of vlan priority by
comparing it to 0. Therefore it is impossible to modify existing vlan
tag to have priority 0.
For example, the following tc command will change the vlan id but will
not affect vlan priority:
tc filter add dev eth1 ingress matchall action vlan modify id 300 \
priority 0 pipe mirred egress redirect dev eth2
The incoming packet on eth1:
ethertype 802.1Q (0x8100), vlan 200, p 4, ethertype IPv4
will be changed to:
ethertype 802.1Q (0x8100), vlan 300, p 4, ethertype IPv4
although the user has intended to have p == 0.
The fix is to add tcfv_push_prio_exists flag to struct tcf_vlan_params
and rely on it when deciding to set the priority.
Fixes: 45a497f2d1 (net/sched: act_vlan: Introduce TCA_VLAN_ACT_MODIFY vlan action)
Signed-off-by: Boris Sukholitko <boris.sukholitko@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b515d26372 ]
Jianwen reported that IPv6 Interoperability tests are failing in an
IPsec case where one of the links between the IPsec peers has an MTU
of 1280. The peer generates a packet larger than this MTU, the router
replies with a "Packet too big" message indicating an MTU of 1280.
When the peer tries to send another large packet, xfrm_state_mtu
returns 1280 - ipsec_overhead, which causes ip6_setup_cork to fail
with EINVAL.
We can fix this by forcing xfrm_state_mtu to return IPV6_MIN_MTU when
IPv6 is used. After going through IPsec, the packet will then be
fragmented to obey the actual network's PMTU, just before leaving the
host.
Currently, TFC padding is capped to PMTU - overhead to avoid
fragementation: after padding and encapsulation, we still fit within
the PMTU. That behavior is preserved in this patch.
Fixes: 91657eafb6 ("xfrm: take net hdr len into account for esp payload size calculation")
Reported-by: Jianwen Ji <jiji@redhat.com>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2799e77529 ]
When I was investigating the swap code, I found the below possible race
window:
CPU 1 CPU 2
----- -----
do_swap_page
if (data_race(si->flags & SWP_SYNCHRONOUS_IO)
swap_readpage
if (data_race(sis->flags & SWP_FS_OPS)) {
swapoff
..
p->swap_file = NULL;
..
struct file *swap_file = sis->swap_file;
struct address_space *mapping = swap_file->f_mapping;[oops!]
Note that for the pages that are swapped in through swap cache, this isn't
an issue. Because the page is locked, and the swap entry will be marked
with SWAP_HAS_CACHE, so swapoff() can not proceed until the page has been
unlocked.
Fix this race by using get/put_swap_device() to guard against concurrent
swapoff.
Link: https://lkml.kernel.org/r/20210426123316.806267-3-linmiaohe@huawei.com
Fixes: 0bcac06f27 ("mm,swap: skip swapcache for swapin of synchronous device")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Alex Shi <alexs@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9517c577f9 ]
As we are using cpu_pm to save and restore context, we must also save and
restore the timer sysconfig register TIOCP_CFG. This is needed because
we are not calling PM runtime functions at all with cpu_pm.
Fixes: b34677b099 ("clocksource/drivers/timer-ti-dm: Implement cpu_pm notifier for context save and restore")
Cc: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: Adam Ford <aford173@gmail.com>
Cc: Andreas Kemnade <andreas@kemnade.info>
Cc: Lokesh Vutla <lokeshvutla@ti.com>
Cc: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210415085506.56828-1-tony@atomide.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ce67eaca95 ]
Replace BIT() in v4l2's UPAI header with _BITUL(). BIT() is not defined
in the UAPI headers and its usage may cause userspace build errors.
Fixes: 206bc0f6fb ("media: vicodec: mark the stateless FWHT API as stable")
Signed-off-by: Joe Richey <joerichey@google.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c0f8aa4fa8 ]
Commit c65e774fb3 ("x86/mm: Make PGDIR_SHIFT and PTRS_PER_P4D variable")
made PTRS_PER_P4D variable on x86 and introduced MAX_PTRS_PER_P4D as a
constant for cases which need a compile-time constant (e.g. fixed-size
arrays).
powerpc likewise has boot-time selectable MMU features which can cause
other mm "constants" to vary. For KASAN, we have some static
PTE/PMD/PUD/P4D arrays so we need compile-time maximums for all these
constants. Extend the MAX_PTRS_PER_ idiom, and place default definitions
in include/pgtable.h. These define MAX_PTRS_PER_x to be PTRS_PER_x unless
an architecture has defined MAX_PTRS_PER_x in its arch headers.
Clean up pgtable-nop4d.h and s390's MAX_PTRS_PER_P4D definitions while
we're at it: both can just pick up the default now.
Link: https://lkml.kernel.org/r/20210624034050.511391-4-dja@axtens.net
Signed-off-by: Daniel Axtens <dja@axtens.net>
Acked-by: Andrey Konovalov <andreyknvl@gmail.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7560c02bdf ]
Some sorts of per-CPU clock sources have a history of going out of
synchronization with each other. However, this problem has purportedy been
solved in the past ten years. Except that it is all too possible that the
problem has instead simply been made less likely, which might mean that
some of the occasional "Marking clocksource 'tsc' as unstable" messages
might be due to desynchronization. How would anyone know?
Therefore apply CPU-to-CPU synchronization checking to newly unstable
clocksource that are marked with the new CLOCK_SOURCE_VERIFY_PERCPU flag.
Lists of desynchronized CPUs are printed, with the caveat that if it
is the reporting CPU that is itself desynchronized, it will appear that
all the other clocks are wrong. Just like in real life.
Reported-by: Chris Mason <clm@fb.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Feng Tang <feng.tang@intel.com>
Link: https://lore.kernel.org/r/20210527190124.440372-2-paulmck@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d327ea15a3 ]
sparse generates the following warning:
include/linux/prandom.h:114:45: sparse: sparse: cast truncates bits from
constant value
This is because the 64-bit seed value is manipulated and then placed in a
u32, causing an implicit cast and truncation. A forced cast to u32 doesn't
prevent this warning, which is reasonable because a typecast doesn't prove
that truncation was expected.
Logical-AND the value with 0xffffffff to make explicit that truncation to
32-bit is intended.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210525122012.6336-3-rf@opensource.cirrus.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0ae71c7720 ]
Alban Crequy reported a race condition userspace faces when we want to
add some fds and make the syscall return them[1] using seccomp notify.
The problem is that currently two different ioctl() calls are needed by
the process handling the syscalls (agent) for another userspace process
(target): SECCOMP_IOCTL_NOTIF_ADDFD to allocate the fd and
SECCOMP_IOCTL_NOTIF_SEND to return that value. Therefore, it is possible
for the agent to do the first ioctl to add a file descriptor but the
target is interrupted (EINTR) before the agent does the second ioctl()
call.
This patch adds a flag to the ADDFD ioctl() so it adds the fd and
returns that value atomically to the target program, as suggested by
Kees Cook[2]. This is done by simply allowing
seccomp_do_user_notification() to add the fd and return it in this case.
Therefore, in this case the target wakes up from the wait in
seccomp_do_user_notification() either to interrupt the syscall or to add
the fd and return it.
This "allocate an fd and return" functionality is useful for syscalls
that return a file descriptor only, like connect(2). Other syscalls that
return a file descriptor but not as return value (or return more than
one fd), like socketpair(), pipe(), recvmsg with SCM_RIGHTs, will not
work with this flag.
This effectively combines SECCOMP_IOCTL_NOTIF_ADDFD and
SECCOMP_IOCTL_NOTIF_SEND into an atomic opteration. The notification's
return value, nor error can be set by the user. Upon successful invocation
of the SECCOMP_IOCTL_NOTIF_ADDFD ioctl with the SECCOMP_ADDFD_FLAG_SEND
flag, the notifying process's errno will be 0, and the return value will
be the file descriptor number that was installed.
[1]: https://lore.kernel.org/lkml/CADZs7q4sw71iNHmV8EOOXhUKJMORPzF7thraxZYddTZsxta-KQ@mail.gmail.com/
[2]: https://lore.kernel.org/lkml/202012011322.26DCBC64F2@keescook/
Signed-off-by: Rodrigo Campos <rodrigo@kinvolk.io>
Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Acked-by: Tycho Andersen <tycho@tycho.pizza>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210517193908.3113-4-sargun@sargun.me
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 50e7a31d30 ]
Smatch static checker warns that "mdev" can be null:
sound/usb/media.c:287 snd_media_device_create()
warn: 'mdev' can also be NULL
If CONFIG_MEDIA_CONTROLLER is disabled, this file should not be included
in the build.
The below conditions in the sound/usb/Makefile are in place to ensure that
media.c isn't included in the build.
sound/usb/Makefile:
snd-usb-audio-$(CONFIG_SND_USB_AUDIO_USE_MEDIA_CONTROLLER) += media.o
select SND_USB_AUDIO_USE_MEDIA_CONTROLLER if MEDIA_CONTROLLER &&
(MEDIA_SUPPORT=y || MEDIA_SUPPORT=SND_USB_AUDIO)
The following config check in include/media/media-dev-allocator.h is
in place to enable the API only when CONFIG_MEDIA_CONTROLLER and
CONFIG_USB are enabled.
#if defined(CONFIG_MEDIA_CONTROLLER) && defined(CONFIG_USB)
This check doesn't work as intended when CONFIG_USB=m. When CONFIG_USB=m,
CONFIG_USB_MODULE is defined and CONFIG_USB is not. The above config check
doesn't catch that CONFIG_USB is defined as a module and disables the API.
This results in sound/usb enabling Media Controller specific ALSA driver
code, while Media disables the Media Controller API.
Fix the problem requires two changes:
1. Change the check to use IS_ENABLED to detect when CONFIG_USB is enabled
as a module or static. Since CONFIG_MEDIA_CONTROLLER is a bool, leave
the check unchanged to be consistent with drivers/media/Makefile.
2. Change the drivers/media/mc/Makefile to include mc-dev-allocator.o
in mc-objs when CONFIG_USB is enabled.
Link: https://lore.kernel.org/alsa-devel/YLeAvT+R22FQ%2FEyw@mwanda/
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 22ca9f4aaf ]
crypto_shash_alg_has_setkey() is implemented by testing whether the
.setkey() member of a struct shash_alg points to the default version,
called shash_no_setkey(). As crypto_shash_alg_has_setkey() is a static
inline, this requires shash_no_setkey() to be exported to modules.
Unfortunately, when building with CFI, function pointers are routed
via CFI stubs which are private to each module (or to the kernel proper)
and so this function pointer comparison may fail spuriously.
Let's fix this by turning crypto_shash_alg_has_setkey() into an out of
line function.
Cc: Sami Tolvanen <samitolvanen@google.com>
Cc: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 67a7e53d5b ]
Dependent slice segment flag for PPS control is misnamed. It should have
"enabled" at the end. It only tells if this flag is present in slice
header or not and not the actual value.
Fix this by renaming the PPS flag and introduce another flag for slice
control which tells actual value.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 00b89fe019 ]
For all intents and purposes, the idle task is a per-CPU kthread. It isn't
created via the same route as other pcpu kthreads however, and as a result
it is missing a few bells and whistles: it fails kthread_is_per_cpu() and
it doesn't have PF_NO_SETAFFINITY set.
Fix the former by giving the idle task a kthread struct along with the
KTHREAD_IS_PER_CPU flag. This requires some extra iffery as init_idle()
call be called more than once on the same idle task.
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210510151024.2448573-2-valentin.schneider@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f1a0a376ca ]
As pointed out by commit
de9b8f5dcb ("sched: Fix crash trying to dequeue/enqueue the idle thread")
init_idle() can and will be invoked more than once on the same idle
task. At boot time, it is invoked for the boot CPU thread by
sched_init(). Then smp_init() creates the threads for all the secondary
CPUs and invokes init_idle() on them.
As the hotplug machinery brings the secondaries to life, it will issue
calls to idle_thread_get(), which itself invokes init_idle() yet again.
In this case it's invoked twice more per secondary: at _cpu_up(), and at
bringup_cpu().
Given smp_init() already initializes the idle tasks for all *possible*
CPUs, no further initialization should be required. Now, removing
init_idle() from idle_thread_get() exposes some interesting expectations
with regards to the idle task's preempt_count: the secondary startup always
issues a preempt_disable(), requiring some reset of the preempt count to 0
between hot-unplug and hotplug, which is currently served by
idle_thread_get() -> idle_init().
Given the idle task is supposed to have preemption disabled once and never
see it re-enabled, it seems that what we actually want is to initialize its
preempt_count to PREEMPT_DISABLED and leave it there. Do that, and remove
init_idle() from idle_thread_get().
Secondary startups were patched via coccinelle:
@begone@
@@
-preempt_disable();
...
cpu_startup_entry(CPUHP_AP_ONLINE_IDLE);
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210512094636.2958515-1-valentin.schneider@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 905ae01c4a ]
For RLIMIT_NPROC and some other rlimits the user_struct that holds the
global limit is kept alive for the lifetime of a process by keeping it
in struct cred. Adding a pointer to ucounts in the struct cred will
allow to track RLIMIT_NPROC not only for user in the system, but for
user in the user_namespace.
Updating ucounts may require memory allocation which may fail. So, we
cannot change cred.ucounts in the commit_creds() because this function
cannot fail and it should always return 0. For this reason, we modify
cred.ucounts before calling the commit_creds().
Changelog
v6:
* Fix null-ptr-deref in is_ucounts_overlimit() detected by trinity. This
error was caused by the fact that cred_alloc_blank() left the ucounts
pointer empty.
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Alexey Gladkov <legion@kernel.org>
Link: https://lkml.kernel.org/r/b37aaef28d8b9b0d757e07ba6dd27281bbe39259.1619094428.git.legion@kernel.org
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 9913d5745b upstream.
All internal use cases for tracepoint_probe_register() is set to not ever
be called with the same function and data. If it is, it is considered a
bug, as that means the accounting of handling tracepoints is corrupted.
If the function and data for a tracepoint is already registered when
tracepoint_probe_register() is called, it will call WARN_ON_ONCE() and
return with EEXISTS.
The BPF system call can end up calling tracepoint_probe_register() with
the same data, which now means that this can trigger the warning because
of a user space process. As WARN_ON_ONCE() should not be called because
user space called a system call with bad data, there needs to be a way to
register a tracepoint without triggering a warning.
Enter tracepoint_probe_register_may_exist(), which can be called, but will
not cause a WARN_ON() if the probe already exists. It will still error out
with EEXIST, which will then be sent to the user space that performed the
BPF system call.
This keeps the previous testing for issues with other users of the
tracepoint code, while letting BPF call it with duplicated data and not
warn about it.
Link: https://lore.kernel.org/lkml/20210626135845.4080-1-penguin-kernel@I-love.SAKURA.ne.jp/
Link: https://syzkaller.appspot.com/bug?id=41f4318cf01762389f4d1c1c459da4f542fe5153
Cc: stable@vger.kernel.org
Fixes: c4f6699dfc ("bpf: introduce BPF_RAW_TRACEPOINT")
Reported-by: syzbot <syzbot+721aa903751db87aa244@syzkaller.appspotmail.com>
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Tested-by: syzbot+721aa903751db87aa244@syzkaller.appspotmail.com
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 122e093c17 upstream.
On systems with memory nodes sorted in descending order, for instance Dell
Precision WorkStation T5500, the struct pages for higher PFNs and
respectively lower nodes, could be overwritten by the initialization of
struct pages corresponding to the holes in the memory sections.
For example for the below memory layout
[ 0.245624] Early memory node ranges
[ 0.248496] node 1: [mem 0x0000000000001000-0x0000000000090fff]
[ 0.251376] node 1: [mem 0x0000000000100000-0x00000000dbdf8fff]
[ 0.254256] node 1: [mem 0x0000000100000000-0x0000001423ffffff]
[ 0.257144] node 0: [mem 0x0000001424000000-0x0000002023ffffff]
the range 0x1424000000 - 0x1428000000 in the beginning of node 0 starts in
the middle of a section and will be considered as a hole during the
initialization of the last section in node 1.
The wrong initialization of the memory map causes panic on boot when
CONFIG_DEBUG_VM is enabled.
Reorder loop order of the memory map initialization so that the outer loop
will always iterate over populated memory regions in the ascending order
and the inner loop will select the zone corresponding to the PFN range.
This way initialization of the struct pages for the memory holes will be
always done for the ranges that are actually not populated.
[akpm@linux-foundation.org: coding style fixes]
Link: https://lkml.kernel.org/r/YNXlMqBbL+tBG7yq@kernel.org
Link: https://bugzilla.kernel.org/show_bug.cgi?id=213073
Link: https://lkml.kernel.org/r/20210624062305.10940-1-rppt@kernel.org
Fixes: 0740a50b9b ("mm/page_alloc.c: refactor initialization of struct page for holes in memory layout")
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Boris Petkov <bp@alien8.de>
Cc: Robert Shteynfeld <robert.shteynfeld@gmail.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: David Hildenbrand <david@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commits 4bad58ebc8 (and
399f8dd9a8, which tried to fix it).
I do not believe these are correct, and I'm about to release 5.13, so am
reverting them out of an abundance of caution.
The locking is odd, and appears broken.
On the allocation side (in __sigqueue_alloc()), the locking is somewhat
straightforward: it depends on sighand->siglock. Since one caller
doesn't hold that lock, it further then tests 'sigqueue_flags' to avoid
the case with no locks held.
On the freeing side (in sigqueue_cache_or_free()), there is no locking
at all, and the logic instead depends on 'current' being a single
thread, and not able to race with itself.
To make things more exciting, there's also the data race between freeing
a signal and allocating one, which is handled by using WRITE_ONCE() and
READ_ONCE(), and being mutually exclusive wrt the initial state (ie
freeing will only free if the old state was NULL, while allocating will
obviously only use the value if it was non-NULL, so only one or the
other will actually act on the value).
However, while the free->alloc paths do seem mutually exclusive thanks
to just the data value dependency, it's not clear what the memory
ordering constraints are on it. Could writes from the previous
allocation possibly be delayed and seen by the new allocation later,
causing logical inconsistencies?
So it's all very exciting and unusual.
And in particular, it seems that the freeing side is incorrect in
depending on "current" being single-threaded. Yes, 'current' is a
single thread, but in the presense of asynchronous events even a single
thread can have data races.
And such asynchronous events can and do happen, with interrupts causing
signals to be flushed and thus free'd (for example - sending a
SIGCONT/SIGSTOP can happen from interrupt context, and can flush
previously queued process control signals).
So regardless of all the other questions about the memory ordering and
locking for this new cached allocation, the sigqueue_cache_or_free()
assumptions seem to be fundamentally incorrect.
It may be that people will show me the errors of my ways, and tell me
why this is all safe after all. We can reinstate it if so. But my
current belief is that the WRITE_ONCE() that sets the cached entry needs
to be a smp_store_release(), and the READ_ONCE() that finds a cached
entry needs to be a smp_load_acquire() to handle memory ordering
correctly.
And the sequence in sigqueue_cache_or_free() would need to either use a
lock or at least be interrupt-safe some way (perhaps by using something
like the percpu 'cmpxchg': it doesn't need to be SMP-safe, but like the
percpu operations it needs to be interrupt-safe).
Fixes: 399f8dd9a8 ("signal: Prevent sigqueue caching after task got released")
Fixes: 4bad58ebc8 ("signal: Allow tasks to cache one sigqueue struct")
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge misc fixes from Andrew Morton:
"24 patches, based on 4a09d388f2.
Subsystems affected by this patch series: mm (thp, vmalloc, hugetlb,
memory-failure, and pagealloc), nilfs2, kthread, MAINTAINERS, and
mailmap"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (24 commits)
mailmap: add Marek's other e-mail address and identity without diacritics
MAINTAINERS: fix Marek's identity again
mm/page_alloc: do bulk array bounds check after checking populated elements
mm/page_alloc: __alloc_pages_bulk(): do bounds check before accessing array
mm/hwpoison: do not lock page again when me_huge_page() successfully recovers
mm,hwpoison: return -EHWPOISON to denote that the page has already been poisoned
mm/memory-failure: use a mutex to avoid memory_failure() races
mm, futex: fix shared futex pgoff on shmem huge page
kthread: prevent deadlock when kthread_mod_delayed_work() races with kthread_cancel_delayed_work_sync()
kthread_worker: split code for canceling the delayed work timer
mm/vmalloc: unbreak kasan vmalloc support
KVM: s390: prepare for hugepage vmalloc
mm/vmalloc: add vmalloc_no_huge
nilfs2: fix memory leak in nilfs_sysfs_delete_device_group
mm/thp: another PVMW_SYNC fix in page_vma_mapped_walk()
mm/thp: fix page_vma_mapped_walk() if THP mapped by ptes
mm: page_vma_mapped_walk(): get vma_address_end() earlier
mm: page_vma_mapped_walk(): use goto instead of while (1)
mm: page_vma_mapped_walk(): add a level of indentation
mm: page_vma_mapped_walk(): crossing page table boundary
...
This ioctl request reads from uffdio_continue structure written by
userspace which justifies _IOC_WRITE flag. It also writes back to that
structure which justifies _IOC_READ flag.
See NOTEs in include/uapi/asm-generic/ioctl.h for more information.
Fixes: f619147104 ("userfaultfd: add UFFDIO_CONTINUE ioctl")
Signed-off-by: Gleb Fotengauer-Malinovskiy <glebfm@altlinux.org>
Acked-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Axel Rasmussen <axelrasmussen@google.com>
Reviewed-by: Dmitry V. Levin <ldv@altlinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
and one in the filesystem for proper propagation of MDS request errors.
Also included a locking fix for async creates, marked for stable.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAmDV440THGlkcnlvbW92
QGdtYWlsLmNvbQAKCRBKf944AhHzi3CXB/0aA0Ka+weQtIxxX3zl1thsE1APxoKe
va77EfTJZbN12UHKAJ6sJUpXCLFc5hVJETw7w3qyz22VvJIPUQWd+h4w4eTXJ4QK
Fab6+HT0/p0NxZ29rxa1bkHnrRAD30cpNd6WXcAeMJ3ZKvZfPtPnIWXSmCbJYGLV
xhwx8y6kzjE60B60bjcQzuSpsMQkq0OpdXYdyxq3RysCjTCyDfpGuFnDHSv3aklm
d6tyv2nUDM/oF/CEFZrTeaLrIZsYxxkpJHKkm7Xy70bUv8IMW97CKJSFjKYucyYd
iV7VbtIKPq3sbGrmkaWm4nET5Z0C+m+JD2AhR17ylbdQy91hKaGrbnpw
=RTBT
-----END PGP SIGNATURE-----
Merge tag 'ceph-for-5.13-rc8' of https://github.com/ceph/ceph-client
Pull ceph fixes from Ilya Dryomov:
"Two regression fixes from the merge window: one in the auth code
affecting old clusters and one in the filesystem for proper
propagation of MDS request errors.
Also included a locking fix for async creates, marked for stable"
* tag 'ceph-for-5.13-rc8' of https://github.com/ceph/ceph-client:
libceph: set global_id as soon as we get an auth ticket
libceph: don't pass result into ac->ops->handle_reply()
ceph: fix error handling in ceph_atomic_open and ceph_lookup
ceph: must hold snap_rwsem when filling inode for async create
If more than one futex is placed on a shmem huge page, it can happen
that waking the second wakes the first instead, and leaves the second
waiting: the key's shared.pgoff is wrong.
When 3.11 commit 13d60f4b6a ("futex: Take hugepages into account when
generating futex_key"), the only shared huge pages came from hugetlbfs,
and the code added to deal with its exceptional page->index was put into
hugetlb source. Then that was missed when 4.8 added shmem huge pages.
page_to_pgoff() is what others use for this nowadays: except that, as
currently written, it gives the right answer on hugetlbfs head, but
nonsense on hugetlbfs tails. Fix that by calling hugetlbfs-specific
hugetlb_basepage_index() on PageHuge tails as well as on head.
Yes, it's unconventional to declare hugetlb_basepage_index() there in
pagemap.h, rather than in hugetlb.h; but I do not expect anything but
page_to_pgoff() ever to need it.
[akpm@linux-foundation.org: give hugetlb_basepage_index() prototype the correct scope]
Link: https://lkml.kernel.org/r/b17d946b-d09-326e-b42a-52884c36df32@google.com
Fixes: 800d8c63b2 ("shmem: add huge pages support")
Reported-by: Neel Natu <neelnatu@google.com>
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Zhang Yi <wetpzy@gmail.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "mm: add vmalloc_no_huge and use it", v4.
Add vmalloc_no_huge() and export it, so modules can allocate memory with
small pages.
Use the newly added vmalloc_no_huge() in KVM on s390 to get around a
hardware limitation.
This patch (of 2):
Commit 121e6f3258 ("mm/vmalloc: hugepage vmalloc mappings") added
support for hugepage vmalloc mappings, it also added the flag
VM_NO_HUGE_VMAP for __vmalloc_node_range to request the allocation to be
performed with 0-order non-huge pages.
This flag is not accessible when calling vmalloc, the only option is to
call directly __vmalloc_node_range, which is not exported.
This means that a module can't vmalloc memory with small pages.
Case in point: KVM on s390x needs to vmalloc a large area, and it needs
to be mapped with non-huge pages, because of a hardware limitation.
This patch adds the function vmalloc_no_huge, which works like vmalloc,
but it is guaranteed to always back the mapping using small pages. This
new function is exported, therefore it is usable by modules.
[akpm@linux-foundation.org: whitespace fixes, per Christoph]
Link: https://lkml.kernel.org/r/20210614132357.10202-1-imbrenda@linux.ibm.com
Link: https://lkml.kernel.org/r/20210614132357.10202-2-imbrenda@linux.ibm.com
Fixes: 121e6f3258 ("mm/vmalloc: hugepage vmalloc mappings")
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 61ca49a910 ("libceph: don't set global_id until we get an
auth ticket") delayed the setting of global_id too much. It is set
only after all tickets are received, but in pre-nautilus clusters an
auth ticket and the service tickets are obtained in separate steps
(for a total of three MAuth replies). When the service tickets are
requested, global_id is used to build an authorizer; if global_id is
still 0 we never get them and fail to establish the session.
Moving the setting of global_id into protocol implementations. This
way global_id can be set exactly when an auth ticket is received, not
sooner nor later.
Fixes: 61ca49a910 ("libceph: don't set global_id until we get an auth ticket")
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
There is no result to pass in msgr2 case because authentication
failures are reported through auth_bad_method frame and in MAuth
case an error is returned immediately.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
bluetooth, netfilter and can.
Current release - regressions:
- mlxsw: spectrum_qdisc: Pass handle, not band number to find_class()
to fix modifying offloaded qdiscs
- lantiq: net: fix duplicated skb in rx descriptor ring
- rtnetlink: fix regression in bridge VLAN configuration, empty info
is not an error, bot-generated "fix" was not needed
- libbpf: s/rx/tx/ typo on umem->rx_ring_setup_done to fix
umem creation
Current release - new code bugs:
- ethtool: fix NULL pointer dereference during module EEPROM dump via
the new netlink API
- mlx5e: don't update netdev RQs with PTP-RQ, the special purpose queue
should not be visible to the stack
- mlx5e: select special PTP queue only for SKBTX_HW_TSTAMP skbs
- mlx5e: verify dev is present in get devlink port ndo, avoid a panic
Previous releases - regressions:
- neighbour: allow NUD_NOARP entries to be force GCed
- further fixes for fallout from reorg of WiFi locking
(staging: rtl8723bs, mac80211, cfg80211)
- skbuff: fix incorrect msg_zerocopy copy notifications
- mac80211: fix NULL ptr deref for injected rate info
- Revert "net/mlx5: Arm only EQs with EQEs" it may cause missed IRQs
Previous releases - always broken:
- bpf: more speculative execution fixes
- netfilter: nft_fib_ipv6: skip ipv6 packets from any to link-local
- udp: fix race between close() and udp_abort() resulting in a panic
- fix out of bounds when parsing TCP options before packets
are validated (in netfilter: synproxy, tc: sch_cake and mptcp)
- mptcp: improve operation under memory pressure, add missing wake-ups
- mptcp: fix double-lock/soft lookup in subflow_error_report()
- bridge: fix races (null pointer deref and UAF) in vlan tunnel egress
- ena: fix DMA mapping function issues in XDP
- rds: fix memory leak in rds_recvmsg
Misc:
- vrf: allow larger MTUs
- icmp: don't send out ICMP messages with a source address of 0.0.0.0
- cdc_ncm: switch to eth%d interface naming
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=xxUe
-----END PGP SIGNATURE-----
Merge tag 'net-5.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Networking fixes for 5.13-rc7, including fixes from wireless, bpf,
bluetooth, netfilter and can.
Current release - regressions:
- mlxsw: spectrum_qdisc: Pass handle, not band number to find_class()
to fix modifying offloaded qdiscs
- lantiq: net: fix duplicated skb in rx descriptor ring
- rtnetlink: fix regression in bridge VLAN configuration, empty info
is not an error, bot-generated "fix" was not needed
- libbpf: s/rx/tx/ typo on umem->rx_ring_setup_done to fix umem
creation
Current release - new code bugs:
- ethtool: fix NULL pointer dereference during module EEPROM dump via
the new netlink API
- mlx5e: don't update netdev RQs with PTP-RQ, the special purpose
queue should not be visible to the stack
- mlx5e: select special PTP queue only for SKBTX_HW_TSTAMP skbs
- mlx5e: verify dev is present in get devlink port ndo, avoid a panic
Previous releases - regressions:
- neighbour: allow NUD_NOARP entries to be force GCed
- further fixes for fallout from reorg of WiFi locking (staging:
rtl8723bs, mac80211, cfg80211)
- skbuff: fix incorrect msg_zerocopy copy notifications
- mac80211: fix NULL ptr deref for injected rate info
- Revert "net/mlx5: Arm only EQs with EQEs" it may cause missed IRQs
Previous releases - always broken:
- bpf: more speculative execution fixes
- netfilter: nft_fib_ipv6: skip ipv6 packets from any to link-local
- udp: fix race between close() and udp_abort() resulting in a panic
- fix out of bounds when parsing TCP options before packets are
validated (in netfilter: synproxy, tc: sch_cake and mptcp)
- mptcp: improve operation under memory pressure, add missing
wake-ups
- mptcp: fix double-lock/soft lookup in subflow_error_report()
- bridge: fix races (null pointer deref and UAF) in vlan tunnel
egress
- ena: fix DMA mapping function issues in XDP
- rds: fix memory leak in rds_recvmsg
Misc:
- vrf: allow larger MTUs
- icmp: don't send out ICMP messages with a source address of 0.0.0.0
- cdc_ncm: switch to eth%d interface naming"
* tag 'net-5.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (139 commits)
net: ethernet: fix potential use-after-free in ec_bhf_remove
selftests/net: Add icmp.sh for testing ICMP dummy address responses
icmp: don't send out ICMP messages with a source address of 0.0.0.0
net: ll_temac: Avoid ndo_start_xmit returning NETDEV_TX_BUSY
net: ll_temac: Fix TX BD buffer overwrite
net: ll_temac: Add memory-barriers for TX BD access
net: ll_temac: Make sure to free skb when it is completely used
MAINTAINERS: add Guvenc as SMC maintainer
bnxt_en: Call bnxt_ethtool_free() in bnxt_init_one() error path
bnxt_en: Fix TQM fastpath ring backing store computation
bnxt_en: Rediscover PHY capabilities after firmware reset
cxgb4: fix wrong shift.
mac80211: handle various extensible elements correctly
mac80211: reset profile_periodicity/ema_ap
cfg80211: avoid double free of PMSR request
cfg80211: make certificate generation more robust
mac80211: minstrel_ht: fix sample time check
net: qed: Fix memcpy() overflow of qed_dcbx_params()
net: cdc_eem: fix tx fixup skb leak
net: hamradio: fix memory leak in mkiss_close
...
When constructing ICMP response messages, the kernel will try to pick a
suitable source address for the outgoing packet. However, if no IPv4
addresses are configured on the system at all, this will fail and we end up
producing an ICMP message with a source address of 0.0.0.0. This can happen
on a box routing IPv4 traffic via v6 nexthops, for instance.
Since 0.0.0.0 is not generally routable on the internet, there's a good
chance that such ICMP messages will never make it back to the sender of the
original packet that the ICMP message was sent in response to. This, in
turn, can create connectivity and PMTUd problems for senders. Fortunately,
RFC7600 reserves a dummy address to be used as a source for ICMP
messages (192.0.0.8/32), so let's teach the kernel to substitute that
address as a last resort if the regular source address selection procedure
fails.
Below is a quick example reproducing this issue with network namespaces:
ip netns add ns0
ip l add type veth peer netns ns0
ip l set dev veth0 up
ip a add 10.0.0.1/24 dev veth0
ip a add fc00:dead:cafe:42::1/64 dev veth0
ip r add 10.1.0.0/24 via inet6 fc00:dead:cafe:42::2
ip -n ns0 l set dev veth0 up
ip -n ns0 a add fc00:dead:cafe:42::2/64 dev veth0
ip -n ns0 r add 10.0.0.0/24 via inet6 fc00:dead:cafe:42::1
ip netns exec ns0 sysctl -w net.ipv4.icmp_ratelimit=0
ip netns exec ns0 sysctl -w net.ipv4.ip_forward=1
tcpdump -tpni veth0 -c 2 icmp &
ping -w 1 10.1.0.1 > /dev/null
tcpdump: verbose output suppressed, use -v[v]... for full protocol decode
listening on veth0, link-type EN10MB (Ethernet), snapshot length 262144 bytes
IP 10.0.0.1 > 10.1.0.1: ICMP echo request, id 29, seq 1, length 64
IP 0.0.0.0 > 10.0.0.1: ICMP net 10.1.0.1 unreachable, length 92
2 packets captured
2 packets received by filter
0 packets dropped by kernel
With this patch the above capture changes to:
IP 10.0.0.1 > 10.1.0.1: ICMP echo request, id 31127, seq 1, length 64
IP 192.0.0.8 > 10.0.0.1: ICMP net 10.1.0.1 unreachable, length 92
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: Juliusz Chroboczek <jch@irif.fr>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove recently added frequency invariance support from the CPPC
cpufreq driver, because it has turned out to be problematic and it
cannot be fixed properly on time for 5.13 (Viresh Kumar).
-----BEGIN PGP SIGNATURE-----
iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAmDMzWkSHHJqd0Byand5
c29ja2kubmV0AAoJEILEb/54YlRxCeYP/2ZvmDC+saX4jz6FCTvJ8J4jc7fGB3QB
k+3ek7tNvazYU470mBR68VFYGvqFkjFIP1yjJgNbh4u8fex1lPLFuWAmPurGic7o
xmuk2+uRG/aSOQPmf+tEVjcBSQn+g/SkvfC6ZIZvbODvCSWQ3VwKWORD+1BdajQJ
7VJCVOXSyqAbeDsijmuJ0j1Nzj6SZbmn7pQODXCcjuwG+jOBbrPGmjBlW24kAVRM
mF9k7xqbjcikzaW9SQZ1S38uzRDu5nK9ipcpdJtDUZ7N+xoa1qUjNLQY3H9gQDYQ
xuocdhpYbOi5ip8srYSJc16xGJPCR7oRxsFS4vuUZAUyuDg0IIvuS2bSLTM7NLBv
hCaibKQQr8fFW87Dnalv7Ld046g0bLAhan33V/8x9lSNOVDSAdFEHOtrXSSCgeEr
XiOlxqT1dCl5FU427fA2QpSnONOfl+JXuZ+zGzP99q1VVdK6xW1cIbIrCaEhHuZv
N9AODRSizrNurU1foBKgZRGj6EGjF/1EuHJ8GiTXQ31SWEdzUKY+J9VIwwPrMTJW
MAMGrgqBpajIry5hzpLaf5uFFfiK/7ijg2Nn3nSMCyd1mwG9hyh2EreomH6lEOxf
Iiu+OFn4cz+R6MDksLBMFCoxUPHBzNpN0tc9IiEQSU8R6xy3GpQhUu4l2JLnKRu+
dZ16oPbhZAnq
=tW38
-----END PGP SIGNATURE-----
Merge tag 'pm-5.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fix from Rafael Wysocki:
"Remove recently added frequency invariance support from the CPPC
cpufreq driver, because it has turned out to be problematic and it
cannot be fixed properly on time for 5.13 (Viresh Kumar)"
* tag 'pm-5.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
Revert "cpufreq: CPPC: Add support for frequency invariance"
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEq1nRK9aeMoq1VSgcnJ2qBz9kQNkFAmDLL74ACgkQnJ2qBz9k
QNleSAf/XikH+tsM6K9yDEeU93GGSqKUB71n9clSQBIiGZ7/UliG0wotrUjec9Rg
vBTZlh3JEdfboeBei+mG3hmOdAoYK4HMsJJikqRGPyWOTujh1eOZlT1LOXaY5zNM
631A9pWe8edlpr4Mq7Wb4nO4FToEZ91iXDLliFF371aV8kP/yuv5ZjHwIn5Pt5gI
DPnWwaJ+meW9KZ4gVKAfvZLVkKFat2xJ9r2LDpqbIkH9SBcfjBmeHOy0gFyCKx6l
yma5iANgtWLhesP6ZwSeaRb1+T9altSLCCFZrYdKH9PXTMFUqzrbiZ8tfVmllePZ
GaUOWcHYiLmvqvXnaAREiHnMFT6prg==
=kevs
-----END PGP SIGNATURE-----
Merge tag 'fixes_for_v5.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull quota and fanotify fixes from Jan Kara:
"A fixup finishing disabling of quotactl_path() syscall (I've missed
archs using different way to declare syscalls) and a fix of an fd leak
in error handling path of fanotify"
* tag 'fixes_for_v5.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
quota: finish disable quotactl_path syscall
fanotify: fix copy_event_to_user() fid error clean up
Running devlink reload command for port in switchdev mode cause
resources to corrupt: driver can't release allocated EQ and reclaim
memory pages, because "rdma" auxiliary device had add CQs which blocks
EQ from deletion.
Erroneous sequence happens during reload-down phase, and is following:
1. detach device - suspends auxiliary devices which support it, destroys
others. During this step "eth-rep" and "rdma-rep" are destroyed,
"eth" - suspended.
2. disable SRIOV - moves device to legacy mode; as part of disablement -
rescans drivers. This step adds "rdma" auxiliary device.
3. destroy EQ table - <failure>.
Driver shouldn't create any device during unload flows. To handle that
implement MLX5_PRIV_FLAGS_DETACH flag, set it on device detach and unset
on device attach. If flag is set do no-op on drivers rescan.
Fixes: a925b5e309 ("net/mlx5: Register mlx5 devices to auxiliary virtual bus")
Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
There is a race between THP unmapping and truncation, when truncate sees
pmd_none() and skips the entry, after munmap's zap_huge_pmd() cleared
it, but before its page_remove_rmap() gets to decrement
compound_mapcount: generating false "BUG: Bad page cache" reports that
the page is still mapped when deleted. This commit fixes that, but not
in the way I hoped.
The first attempt used try_to_unmap(page, TTU_SYNC|TTU_IGNORE_MLOCK)
instead of unmap_mapping_range() in truncate_cleanup_page(): it has
often been an annoyance that we usually call unmap_mapping_range() with
no pages locked, but there apply it to a single locked page.
try_to_unmap() looks more suitable for a single locked page.
However, try_to_unmap_one() contains a VM_BUG_ON_PAGE(!pvmw.pte,page):
it is used to insert THP migration entries, but not used to unmap THPs.
Copy zap_huge_pmd() and add THP handling now? Perhaps, but their TLB
needs are different, I'm too ignorant of the DAX cases, and couldn't
decide how far to go for anon+swap. Set that aside.
The second attempt took a different tack: make no change in truncate.c,
but modify zap_huge_pmd() to insert an invalidated huge pmd instead of
clearing it initially, then pmd_clear() between page_remove_rmap() and
unlocking at the end. Nice. But powerpc blows that approach out of the
water, with its serialize_against_pte_lookup(), and interesting pgtable
usage. It would need serious help to get working on powerpc (with a
minor optimization issue on s390 too). Set that aside.
Just add an "if (page_mapped(page)) synchronize_rcu();" or other such
delay, after unmapping in truncate_cleanup_page()? Perhaps, but though
that's likely to reduce or eliminate the number of incidents, it would
give less assurance of whether we had identified the problem correctly.
This successful iteration introduces "unmap_mapping_page(page)" instead
of try_to_unmap(), and goes the usual unmap_mapping_range_tree() route,
with an addition to details. Then zap_pmd_range() watches for this
case, and does spin_unlock(pmd_lock) if so - just like
page_vma_mapped_walk() now does in the PVMW_SYNC case. Not pretty, but
safe.
Note that unmap_mapping_page() is doing a VM_BUG_ON(!PageLocked) to
assert its interface; but currently that's only used to make sure that
page->mapping is stable, and zap_pmd_range() doesn't care if the page is
locked or not. Along these lines, in invalidate_inode_pages2_range()
move the initial unmap_mapping_range() out from under page lock, before
then calling unmap_mapping_page() under page lock if still mapped.
Link: https://lkml.kernel.org/r/a2a4a148-cdd8-942c-4ef8-51b77f643dbe@google.com
Fixes: fc127da085 ("truncate: handle file thp")
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jue Wang <juew@google.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Peter Xu <peterx@redhat.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Wang Yugui <wangyugui@e16-tech.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
