Turris Omnia's MCU provides various features that can be configured over
I2C at address 0x2a. Add device-tree node.
This does not carry a Fixes tag - we do not want this to get backported
to stable kernels for the following reason: U-Boot since v2022.10
inserts a phy-reset-gpio property into the WAN ethernet node pointing to
the MCU node if it finds the MCU node with a cznic,turris-omnia-mcu
compatible. Thus if this change got backported to a stable kernel, the
WAN interface driver would defer probe indefinitely (since it would wait
for the turris-omnia-mcu driver which would not be present).
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20240701113010.16447-8-kabel@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
R-Car V4H (R8A779G0) supports only 1 AUDIO_CLKOUT and 1 SSI,
thus, #clock-cells / #sound-dai-cells are both fixed to zero.
(#sound-dai-cells is needed for Simple-Audio-Card, but not needed for
Audio-Graph-Card). Fix this up.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/87frt3kxew.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add the missing fifth interrupt to the device node that represents the
ARM architected timer. While at it, add an interrupt-names property for
clarity,
Fixes: e20396d65b ("arm64: dts: renesas: Add initial DTSI for RZ/G3S SoC")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Tested-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://lore.kernel.org/884c683fb6c1d1bf7d0d383a8df8f65a0a424dc7.1718890849.git.geert+renesas@glider.be
Add the missing fifth interrupt to the device node that represents the
ARM architected timer. While at it, add an interrupt-names property for
clarity,
Fixes: 7c2b8198f4 ("arm64: dts: renesas: Add initial DTSI for RZ/V2L SoC")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/834244e77e5f407ee6fab1ab5c10c98a8a933085.1718890849.git.geert+renesas@glider.be
Add the missing fifth interrupt to the device node that represents the
ARM architected timer. While at it, add an interrupt-names property for
clarity,
Fixes: 68a4552529 ("arm64: dts: renesas: Add initial DTSI for RZ/G2{L,LC} SoC's")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/21f556eb7e903d5b9f4c96188fd4b6ae0db71856.1718890849.git.geert+renesas@glider.be
Add the missing fifth interrupt to the device node that represents the
ARM architected timer. While at it, add an interrupt-names property for
clarity,
Fixes: cf40c9689e ("arm64: dts: renesas: Add initial DTSI for RZ/G2UL SoC")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/15cc7a7522b1658327a2bd0c4990d0131bbcb4d7.1718890849.git.geert+renesas@glider.be
The four Cortex-A76 CPU cores on R-Car V4M share their Operating
Performance Points (OPP) table, but they have independent clocks.
All cores in the cluster can switch DVFS states independently, hence
the cluster's OPP table should not have an "opp-shared" property.
Fixes: 6bd8b0bc44 ("arm64: dts: renesas: r8a779h0: Add CA76 operating points")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/4e0227ff4388485cdb1ca2855ee6df92754e756e.1718890585.git.geert+renesas@glider.be
and Neardi LBA3368.
Interesting core changes: dropping of the rk3399pro dtsi - Dragan dug
through available information, boards and found out that the pcie-stuff
described in the existing rk3399pro dtsi is actually not true and the
file can go away.
And also a bit of reorganizing of rk3588 dtsi files. There are number
of rk3588 variants in existence that select between two sets of
peripherals and also multiple sets of operating points. So the change
sorts it differently so that we stop including one soc-variant into
others and also make room for the operating points.
The rk3308 got io domains, a number of additions to the rk3308-rock-pi-s
board (wifi, io-domains, otp, ethernet, uart, sdmmc).
And then there are of course the usual set of new additions like
rk3588 pcie endpoint support and individual peripherals for boards.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAmZ+p5wQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgRR1B/47XZQRe94xg0is7nptf9UehEE6UaoDSrMj
9C0JLEt6CLrlaCDVbd387/8+Ehm0Mc1SpXWZa+/JUROKiIaAMNesVsCDkrlsF5W/
Df0z1Bxg3WOii2RNNidl4FC3UbZDJ+SQc8kRnk4AARsIJZEXtRuGv8ExrNTVjURC
PwST1e7yL8xk4Mq5f7SVcT0V/vL6O/Ae27w464q45o8dFtoTKdgXHhEHZYqPiv1e
XIvoVBBfkqFZcj+YbrPJHJWS9XguEHjUvzXVp3TO1WoHnwtjJeQbqdI9H2AWF5DY
xYqRMrLDv0azqU4QwpkA9C81zSOko1EpqN7p2b9k/4V3NgmSzI7H
=rZGA
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=yOYl
-----END PGP SIGNATURE-----
Merge tag 'v6.11-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt
New boards, the Radxa ROCK S0, Radxa ZERO 3W/3E, CM3588 NAS solution
and Neardi LBA3368.
Interesting core changes: dropping of the rk3399pro dtsi - Dragan dug
through available information, boards and found out that the pcie-stuff
described in the existing rk3399pro dtsi is actually not true and the
file can go away.
And also a bit of reorganizing of rk3588 dtsi files. There are number
of rk3588 variants in existence that select between two sets of
peripherals and also multiple sets of operating points. So the change
sorts it differently so that we stop including one soc-variant into
others and also make room for the operating points.
The rk3308 got io domains, a number of additions to the rk3308-rock-pi-s
board (wifi, io-domains, otp, ethernet, uart, sdmmc).
And then there are of course the usual set of new additions like
rk3588 pcie endpoint support and individual peripherals for boards.
* tag 'v6.11-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (42 commits)
arm64: dts: rockchip: Delete the SoC variant dtsi for RK3399Pro
arm64: dts: rockchip: Fix mic-in-differential usage on rk3568-evb1-v10
arm64: dts: rockchip: Fix mic-in-differential usage on rk3566-roc-pc
arm64: dts: rockchip: Drop invalid mic-in-differential on rk3568-rock-3a
arm64: dts: rockchip: Add rock5b overlays for PCIe endpoint mode
arm64: dts: rockchip: Add PCIe endpoint mode support
arm64: dts: rockchip: Increase VOP clk rate on RK3328
arm64: dts: rockchip: add gpio-line-names to radxa-zero-3
arm64: dts: rockchip: Split GPU OPPs of RK3588 and RK3588j
arm64: dts: rockchip: Add OPP data for CPU cores on RK3588j
arm64: dts: rockchip: Add OPP data for CPU cores on RK3588
arm64: dts: rockchip: Add CPU/memory regulator coupling for 2 RK3588 boards
arm64: dts: rockchip: fix mmc aliases for Radxa ZERO 3E/3W
arm64: dts: rockchip: Add Neardi LBA3368 board
dt-bindings: arm: rockchip: Add Neardi LBA3368
dt-bindings: vendor-prefixes: Add Neardi Technology
arm64: dts: rockchip: Enable PinePhone Pro vibrator
arm64: dts: rockchip: Enable PinePhone Pro IMU sensor
arm64: dts: rockchip: Add Pinephone Pro support for GPIO LEDs
arm64: dts: rockchip: Enable SPI flash on PinePhone Pro
...
Link: https://lore.kernel.org/r/4901395.GXAFRqVoOG@diego
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This adds a single commit that cleans up the drive-strength
value assignment on all devicetrees using the deprecated
MTK_DRIVE_(x)mA definition.
-----BEGIN PGP SIGNATURE-----
iJ4EABYKAEYWIQQn3Xxr56ypAcSHzXSaNgTPrZeEeAUCZn6APSgcYW5nZWxvZ2lv
YWNjaGluby5kZWxyZWdub0Bjb2xsYWJvcmEuY29tAAoJEJo2BM+tl4R4wesA/0Ll
b9k4FkjiwHD8VIUbN6N1dxPlhXG7cJTAYa9Im+utAQDVG+PRkX1SzWjKBMDW+ewI
wi4EOu3U8LB+yd9uktFKAA==
=5M+u
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmZ+2mEACgkQYKtH/8kJ
UicEhQ//QU2tR/li/J5OegjPmTBmNXjyn97OPd5BZzaO7/AMJTLTi/G2+snTORVz
N9tT7QJq5gK9GxI/SlhUXfmH9m+CGT8n7yLtwLDUIoo7IcgB6u4CsWoSANRuxM0n
kWIWzMVg0C4tRUJljCtWrhOZsHLTbzNHeRrmlbWuSDkaKVmRiqMYuhMojvYOUgz7
5z/1f48SBA5GGlENf7VaVlN98B9UaZ4UjplIGf1O7KjB96B7HLCHMEt9V4k+vywX
oaSMtrbFW4cveBLk8TXqlsqcTj63w2Nr7H9eZh0pSv/roaEWSBMt8BQRPCxp8j7/
lvoqhPcrKDyKbGDRWCZ+XJvBwAE4FftkceJzdsKxauGRHUQsrxEt9ygWDlxEQYNo
4hcKSErhggLJbTFDSwDOrcdw7EsUEoW25XkArRezdOWc3KymEAFi+1dIdfDvM+9+
AgfrPHW6OdfJadGZ+U/N8ovzHZWs6uJznMtBPqGdDTWJPSDIDhoK03FoYxQ9IqKW
TMaeQkd47LEIHz0XqNgBRUezBEs4zn5M0d9psYBkJRIsumux6hj1VKva8u4ETHwH
onsTI3j9CLf2N9f8abmgD+sXdR7fDYh93huPtZGEbsrmajDOZKnHweYCsmeT9ws2
DGhQV1gHxL/akLkmX+nzkyWssUc79w07SJTgM5x0Yt5TpzNlNOY=
=eCJ3
-----END PGP SIGNATURE-----
Merge tag 'mtk-dts32-for-v6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux into soc/dt
MediaTek ARM32 DTS updates for v6.11
This adds a single commit that cleans up the drive-strength
value assignment on all devicetrees using the deprecated
MTK_DRIVE_(x)mA definition.
* tag 'mtk-dts32-for-v6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux:
arm: dts: mediatek: Declare drive-strength numerically
Link: https://lore.kernel.org/r/20240628093801.126013-2-angelogioacchino.delregno@collabora.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This introduces the new Airoha (MediaTek) EN7581 home networking
platform (routers) in early stages, but with support for its
Evaluation Board, a few more MediaTek based machines, and
improvements for existing ones.
For the MT7981 router SoC we get pinctrl support, along with the
enablement of its watchdog, eFuse/nvmem, I2C and integrated WiFi
controller, other than the introduction of new machines based on
this chip: the Cudy WR3000 V1 router and the OpenWRT One.
MT7986 gets a new machine: the BananaPi R3 Mini.
Some advancements have been done also on the MT7988 SoC, which
gains support for its I2C, PWM and USB XHCI controllers.
MediaTek Genio SoCs also get attention, with the introduction of a
basic device tree for the MT8390 Genio 700-EVK board, and for the
MT8395 Genio 1200 powered Kontron 3.5"-SBC-i1200.
Additionally, the Genio 1200 Radxa NIO12L board gets support for
USB Role Switching and proper PCI-Express controller PM suspend
and resume, other than finally enabling CPU and GPU frequency
and voltage scaling for improved efficiency.
Speaking of MediaTek Kompanio SoCs (Chromebooks) instead, thanks
to community interest and help in testing, there comes support for
the MT8195-powered HP Chromebook X360 13b-ca0002sa, while Google
contributed support for the MT8186-powered Acer Chromebook 311.
Moreover, MT8188 gets support for its integrated power domains,
other than its Global Command Engine (GCE) mailboxes, initial
basic support for the VDO0/1 blocks for multimedia, and its GPU
(ARM Mali G57-MC3, Valhall-JM) with Panfrost.
Besides that, this also adds a few other cleanups and improvements
for all machines using the MT8183, MT8192, MT8195/MT8395 SoCs and
adds generation of symbols on base devicetrees of machines using
Device Tree Overlay(s) (DTBO).
In particular:
- The MediaTek Smart Voltage Scaling (SVS) is now fully working
those SoCs, bringing further power efficiency improvements;
- Thermal zones were refactored on MT8183 for consistency with
the other MediaTek SoCs and for readability
- Sound DAI links are now consistently specified in device tree
on MT8195 and MT8186 machines
- Newly supported machines/boards
- EN7581: EVK
- MT7981: Cudy WR3000 V1, OpenWRT One
- MT7986: BananaPi R3 Mini
- MT8186: Acer Chromebook 311 (Corsola Voltorb)
- MT8195: HP Chromebook X360 13b-ca0002sa (Cherry Dojo)
- MT8390/8188: Genio 700 EVK
- Some cleanups for unused/legacy devicetree properties
-----BEGIN PGP SIGNATURE-----
iJ4EABYKAEYWIQQn3Xxr56ypAcSHzXSaNgTPrZeEeAUCZn0thSgcYW5nZWxvZ2lv
YWNjaGluby5kZWxyZWdub0Bjb2xsYWJvcmEuY29tAAoJEJo2BM+tl4R4B94BANp1
sg23FYuR+RIMOtJ7542D1HVRr/l3D27XFSAw0yjbAP9cTg5ps+SR4fsr+ipectwP
MBqhJLJu7KriAl63aY2/BQ==
=paIN
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=lO7d
-----END PGP SIGNATURE-----
Merge tag 'mtk-dts64-for-v6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux into soc/dt
MediaTek ARM64 DTS updates for v6.11
This introduces the new Airoha (MediaTek) EN7581 home networking
platform (routers) in early stages, but with support for its
Evaluation Board, a few more MediaTek based machines, and
improvements for existing ones.
For the MT7981 router SoC we get pinctrl support, along with the
enablement of its watchdog, eFuse/nvmem, I2C and integrated WiFi
controller, other than the introduction of new machines based on
this chip: the Cudy WR3000 V1 router and the OpenWRT One.
MT7986 gets a new machine: the BananaPi R3 Mini.
Some advancements have been done also on the MT7988 SoC, which
gains support for its I2C, PWM and USB XHCI controllers.
MediaTek Genio SoCs also get attention, with the introduction of a
basic device tree for the MT8390 Genio 700-EVK board, and for the
MT8395 Genio 1200 powered Kontron 3.5"-SBC-i1200.
Additionally, the Genio 1200 Radxa NIO12L board gets support for
USB Role Switching and proper PCI-Express controller PM suspend
and resume, other than finally enabling CPU and GPU frequency
and voltage scaling for improved efficiency.
Speaking of MediaTek Kompanio SoCs (Chromebooks) instead, thanks
to community interest and help in testing, there comes support for
the MT8195-powered HP Chromebook X360 13b-ca0002sa, while Google
contributed support for the MT8186-powered Acer Chromebook 311.
Moreover, MT8188 gets support for its integrated power domains,
other than its Global Command Engine (GCE) mailboxes, initial
basic support for the VDO0/1 blocks for multimedia, and its GPU
(ARM Mali G57-MC3, Valhall-JM) with Panfrost.
Besides that, this also adds a few other cleanups and improvements
for all machines using the MT8183, MT8192, MT8195/MT8395 SoCs and
adds generation of symbols on base devicetrees of machines using
Device Tree Overlay(s) (DTBO).
In particular:
- The MediaTek Smart Voltage Scaling (SVS) is now fully working
those SoCs, bringing further power efficiency improvements;
- Thermal zones were refactored on MT8183 for consistency with
the other MediaTek SoCs and for readability
- Sound DAI links are now consistently specified in device tree
on MT8195 and MT8186 machines
- Newly supported machines/boards
- EN7581: EVK
- MT7981: Cudy WR3000 V1, OpenWRT One
- MT7986: BananaPi R3 Mini
- MT8186: Acer Chromebook 311 (Corsola Voltorb)
- MT8195: HP Chromebook X360 13b-ca0002sa (Cherry Dojo)
- MT8390/8188: Genio 700 EVK
- Some cleanups for unused/legacy devicetree properties
* tag 'mtk-dts64-for-v6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux: (58 commits)
arm64: dts: mediatek: Declare drive-strength numerically
arm64: dts: mt7622: fix switch probe on bananapi-r64
arm64: dts: mediatek: Add MT8186 Voltorb Chromebooks
dt-bindings: arm: mediatek: Add MT8186 Voltorb Chromebooks
arm64: dts: mediatek: Makefile: Generate symbols for DTBO support
arm64: dts: mediatek: mt8183-kukui-jacuzzi: Add ports node for anx7625
arm64: dts: mediatek: mt8183-pico6: Fix wake-on-X event node names
arm64: dts: mt8173: Add G2Touch touchscreen node
arm64: dts: mediatek: mt8183-kukui: Fix the value of `dlg,jack-det-rate` mismatch
arm64: dts: mediatek: mt8188: Add support for Mali GPU on Panfrost
arm64: dts: mediatek: mt8188: Add support for SoC power domains
arm64: dts: mediatek: mt8188: Add VDOSYS0/1 support for multimedia
arm64: dts: mediatek: mt8188: Add Global Command Engine mailboxes
arm64: dts: mediatek: mt8173-elm: drop PMIC's syscon node
arm64: dts: mediatek: mt8365: use a specific SCPSYS compatible
arm64: dts: mediatek: mt8365: drop incorrect power-domain-cells
arm64: dts: mediatek: mt7981: add I2C controller
arm64: dts: mediatek: mt7622: fix "emmc" pinctrl mux
arm64: dts: mediatek: mt7988: add I2C controllers
arm64: dts: mediatek: mt7988: add PWM controller
...
Link: https://lore.kernel.org/r/20240628093801.126013-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
_ Add #thermal-sensor-cells property on stih410.dtsi and stih418.dtsi
_ Add thermal-zones support on stih418
_
-----BEGIN PGP SIGNATURE-----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=lbQi
-----END PGP SIGNATURE-----
Merge tag 'sti-dt-for-v6.11-round1' of https://git.kernel.org/pub/scm/linux/kernel/git/pchotard/sti into soc/dt
STi DT for v6.11 :
_ Add #thermal-sensor-cells property on stih410.dtsi and stih418.dtsi
_ Add thermal-zones support on stih418
_
There's not much reason to have multiple fixed-factor-clock instances
which are all the same factor and clock input. Drop the nodes, but keep
the labels to minimize the changes and keep some distinction of the
different clocks.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/20240528191536.1444649-1-robh@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240627-arm-dts-fixes-v1-1-40a2cb7d344b@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The commit 587b4ee24f ("arm64: dts: rockchip: add core dtsi file for
RK3399Pro SoCs") describes the RK3399Pro's PCI Express interface as the way
built-in NPU communicates with the rest of the SoC. All available evidence
shows this not to be accurate, as described in detail below. Moreover, the
rk3399pro.dtsi isn't used anywhere, so let's delete it.
The publicly available schematics of the Radxa Rock Pi N10 carrier board [1]
and the Vamrs VMARC RK3399Pro SoM, [2] which put together form the currently
single supported RK3399Pro-based board, clearly show that the PCI Express x4
interface of this SoC is fully functional and actually not used by the SoC
to communicate with the built-in NPU. In more detail, the VMARC SoM exports
the SoC's PCI Express interface at its board-to-board connector, and the Rock
Pi N10 routes it to an M.2 M-key slot with four PCI Express lanes.
Both the Rockchip RK3399Pro datasheet, version 1.1, [3] and the Rockchip
RK3399Pro technical reference manual (TRM), first part of the version 1.0, [4]
don't describe that the SoC's PCI Express interface is reserved for the NPU.
Instead, the RK3399Pro TRM describes that the NPU uses AHB and AXI interfaces
as the host interface (HIF). The RK3399Pro datasheet clearly describes that
the PCI Express x4 interface is available for general-purpose use, just like
it's the case with the standard Rockchip RK3399 SoC, [5] albeit with a bit
shorter feature list provided in the RK3399Pro datasheet.
Even the publicly available reference RK3399Pro schematic from Rockchip [6]
shows the availability of a standard PCI Express slot with four lanes, which
would be pretty much impossible if the PCI Express interface was reserved
for the communication with the built-in NPU.
Based on the RK3399Pro datasheet [3] and the board schematics, [2][6] the
built-in NPU actually exports NPU_PCIE as a separate PCI Express x2 interface
that's partially pinmuxed with the NPU's separate USB 3.0 interface, which is
described further in the next paragraph. However, the NPU's separate PCI
Express x2 interface is left undocumented in the publicly available RK3399Pro
documentation, in which it's clearly described as reserved for internal use
and not intended for the communication with the NPU. Finally, the evidently
independent nature of the separate NPU_PCIE x2 interface makes ignoring it
safe when it comes to determining the nature and the availability of the
RK3399Pro's main PCI Express x4 interface.
The actual application-level communication with the built-in NPU, including
powering it up and down and uploading the NPU firmware, is performed through
the separate USB 2.0 and USB 3.0 interfaces exported by the NPU, [7] which
the VMARC SoM [2] and the reference board design from Rockchip [6] route to
the SoC's standard USB 2.0 and USB 3.0 interfaces, to make the NPU accessible
to software running on the SoC's ARM cores.
[1] https://dl.radxa.com/rockpin10/docs/hw/rockpi_n10_sch_v1.1_20190909.pdf
[2] https://dl.radxa.com/rockpin10/docs/hw/VMARC_RK3399Pro_sch_V1.1_20190619.pdf
[3] https://www.rockchip.fr/RK3399Pro%20datasheet%20V1.1.pdf
[4] https://www.rockchip.fr/Rockchip%20RK3399Pro%20TRM%20V1.0%20Part1.pdf
[5] https://www.rockchip.fr/RK3399%20datasheet%20V1.8.pdf
[6] https://opensource.rock-chips.com/images/e/e4/RK_EVB_RK3399PRO_LP3S178P332SD8_V11_20181113_RZF.pdf
[7] https://wiki.radxa.com/RockpiN10/dev/NPU-booting
Signed-off-by: Dragan Simic <dsimic@manjaro.org>
Link: https://lore.kernel.org/r/4449f7d4eead787308300e2d1d37b88c9d1446b2.1717308862.git.dsimic@manjaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The 'mic-in-differential' DT property supported by the RK809/RK817 audio
codec driver is actually valid if prefixed with 'rockchip,':
DTC_CHK arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dtb
rk3568-evb1-v10.dtb: pmic@20: codec: 'mic-in-differential' does not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/mfd/rockchip,rk809.yaml#
Make use of the correct property name.
Fixes: 3e4c629ca6 ("arm64: dts: rockchip: enable rk809 audio codec on the rk3568 evb1-v10")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20240622-rk809-fixes-v2-5-c0db420d3639@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The 'mic-in-differential' DT property supported by the RK809/RK817 audio
codec driver is actually valid if prefixed with 'rockchip,':
DTC_CHK arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dtb
rk3566-roc-pc.dtb: pmic@20: codec: 'mic-in-differential' does not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/mfd/rockchip,rk809.yaml#
Make use of the correct property name.
Fixes: a8e35c4beb ("arm64: dts: rockchip: add audio nodes to rk3566-roc-pc")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20240622-rk809-fixes-v2-4-c0db420d3639@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The 'mic-in-differential' DT property supported by the RK809/RK817 audio
codec driver is actually valid if prefixed with 'rockchip,':
DTC_CHK arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dtb
rk3568-rock-3a.dtb: pmic@20: codec: 'mic-in-differential' does not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/mfd/rockchip,rk809.yaml#
However, the board doesn't make use of differential signaling, hence
drop the incorrect property and the now unnecessary 'codec' node.
Fixes: 22a442e658 ("arm64: dts: rockchip: add basic dts for the radxa rock3 model a")
Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20240622-rk809-fixes-v2-3-c0db420d3639@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add rock5b overlays for PCIe endpoint mode support.
If using the rock5b as an endpoint against a normal PC, only the
rk3588-rock-5b-pcie-ep.dtbo needs to be applied.
If using two rock5b:s, with one board as EP and the other board as RC,
rk3588-rock-5b-pcie-ep.dtbo and rk3588-rock-5b-pcie-srns.dtbo has to
be applied to the respective boards.
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Link: https://lore.kernel.org/r/20240607-rockchip-pcie-ep-v1-v5-13-0a042d6b0049@kernel.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add a device tree node representing PCIe endpoint mode.
The controller can either be configured to run in Root Complex or Endpoint
mode.
If a user wants to run the controller in endpoint mode, the user has to
disable the pcie3x4 node and enable the pcie3x4_ep node.
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20240607-rockchip-pcie-ep-v1-v5-12-0a042d6b0049@kernel.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add a 'thermal-zones' node for stih418.
A thermal-zone needs three components:
- thermal sensors, described in an earlier commit[1]
- cooling devices, specified for each CPU
- a thermal zone, describing the overall behavior.
The thermal zone needs references to both CPUs and thermal sensors,
which phandle are also added. The thermal management will then be
achieved on CPUs using the cpufreq framework.
[1] https://lore.kernel.org/lkml/20240320-thermal-v3-2-700296694c4a@gmail.com/
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Raphael Gallais-Pou <rgallaispou@gmail.com>
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
'#sound-dai-cells' is required to properly interpret
the list of DAI specified in the 'sound-dai' property,
so add them to the 'hdmi' node for 'rk3128.dtsi'.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/9d0fabb0-70b0-4b4b-ac7c-389b1c7afe20@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
'#sound-dai-cells' is required to properly interpret
the list of DAI specified in the 'sound-dai' property,
so add them to the 'hdmi' node for 'rk3036.dtsi'.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/55d302e5-c018-4b93-84c1-8cf75162e939@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Addition of dedicated FPGA syscon compatible for Juno platforms. Also
enablement of GPU device node now that the panfrost driver is already
enabled as a module in defconfig.
-----BEGIN PGP SIGNATURE-----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=trlg
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=lU78
-----END PGP SIGNATURE-----
Merge tag 'juno-updates-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/dt
Arm Juno updates for v6.11
Addition of dedicated FPGA syscon compatible for Juno platforms. Also
enablement of GPU device node now that the panfrost driver is already
enabled as a module in defconfig.
* tag 'juno-updates-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
arm64: dts: juno: Enable GPU
arm64: dts: juno: add dedicated FPGA syscon compatible
dt-bindings: arm: arm,juno-fpga-apb-regs: document FPGA syscon
Link: https://lore.kernel.org/r/20240620093924.375244-2-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Add support for the second and third Ethernet interfaces on the
White Hawk development board,
- Add support for the second Ethernet interface on the RZ/N1 SoC,
- Add I2C EEPROM support for the Condor-I development board,
- Add video capture support for the R-Car V4M SoC,
- Miscellaneous fixes and improvements.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCZmv/jAAKCRCKwlD9ZEnx
cNnMAQCcV1ReuhVkemL08Y18kumtj7Mb9L4DgrSuXHhg0h88+gD+OJ2IRa+50CV9
wg830gqRhFvwdL+A3oAKvSKsfvjVIAI=
=jGtG
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=guZW
-----END PGP SIGNATURE-----
Merge tag 'renesas-dts-for-v6.11-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v6.11
- Add support for the second and third Ethernet interfaces on the
White Hawk development board,
- Add support for the second Ethernet interface on the RZ/N1 SoC,
- Add I2C EEPROM support for the Condor-I development board,
- Add video capture support for the R-Car V4M SoC,
- Miscellaneous fixes and improvements.
* tag 'renesas-dts-for-v6.11-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: dts: renesas: r8a779h0: Add video capture nodes
arm64: dts: renesas: r9a08g045: Update fallback string for SDHI nodes
arm64: dts: renesas: rzg2l: Update fallback string for SDHI nodes
arm64: dts: renesas: r9a09g011: Update fallback string for SDHI nodes
arm64: dts: renesas: s4sk: Add aliases for I2C buses
arm64: dts: renesas: spider-cpu: Add aliases for I2C buses
arm64: dts: renesas: white-hawk-cpu: Add aliases for I2C buses
arm64: dts: renesas: condor-i: Add I2C EEPROM
arm64: dts: renesas: gray-hawk-single: Add aliases for I2C buses
ARM: dts: renesas: r9a06g032: Describe GMAC1
arm64: dts: renesas: white-hawk: ethernet: Describe AVB1 and AVB2
arm64: dts: renesas: r8a779g0: Use MDIO node for all AVB devices
Link: https://lore.kernel.org/r/cover.1718355312.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
On some devicetrees, the drive-strength property gets assigned a
MTK_DRIVE_(x)_mA definition, which matches with (x).
For example, MTK_DRIVE_8mA equals to 8 and MTK_DRIVE_30mA equals
to 30.
Also keeping in mind that the drive-strength property is, by
(binding) definition, taking a number in milliamperes unit,
change all devicetrees to avoid the usage of any MTK_DRIVE_(x)
definition.
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20240620101656.1096374-2-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
After commit 868ff5f494
("net: dsa: mt7530-mdio: read PHY address of switch from device tree")
the mt7531 switch on Bananapi-R64 was not detected.
mt7530-mdio mdio-bus:00: reset timeout
mt7530-mdio mdio-bus:00: probe with driver mt7530-mdio failed with error -110
Fix this by adding phy address in devicetree.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Link: https://lore.kernel.org/r/20240516204847.171029-1-linux@fw-web.de
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Add device trees for the MT8186 based Voltorb Chromebooks, also known
as the Acer Chromebook 311 (C723/C723T). The devices are clamshell
style laptops with an optional touchscreen.
The devices differ from the other existing MT8186 Chromebooks in that
it uses a higher speced / binned SoC which also requires a separate
PMIC for the big core cluster. Also, a different codec is used for
the internal speakers.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20240620094746.2404753-4-wenst@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Add an entry for the MT8186 based Voltorb Chromebooks, also known as the
Acer Chromebook 311 (C723/C723T). The device is a clamshell style laptop
with an optional touchscreen.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240620094746.2404753-3-wenst@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Add DTC_FLAGS '-@' for mt7986a-bananapi-bpi-r3 and -mini to
instruct the devicetree compiler to enable generation of symbols.
This allows proper support for Device Tree Overlay(s) for those
boards; future boards that need DTBO support are expected to add
their own DTC_FLAGS_{dtb-name}.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240620101830.1097548-1-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
The anx7625 binding requires a "ports" node as a container for the
"port" nodes. The jacuzzi dtsi file is missing it.
Add a "ports" node under the anx7625 node, and move the port related
nodes and properties under it.
Fixes: cabc71b08e ("arm64: dts: mt8183: Add kukui-jacuzzi-damu board")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240131083931.3970388-1-wenst@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
The wake-on-bt and wake-on-wlan nodes don't have a button- or event-
prefix that the gpio-keys binding requires.
Fix up the node names to satisfy the binding. While at it, also fix up
the GPIO overriding structure for the wake-on-wlan node. Instead of
referencing the gpio-keys node and then open coding the node, add a
label for the event node, and use that to reference and override the
GPIO settings.
Fixes: 055ef10ccd ("arm64: dts: mt8183: Add jacuzzi pico/pico6 board")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240131084043.3970576-1-wenst@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Lenovo Ideapad C330 Chromebook (MTK) uses G2Touch touchscreen as a
second source component.
Signed-off-by: Pin-yen Lin <treapking@chromium.org>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20231115043511.2670477-1-treapking@chromium.org
[Angelo: Rebased and added comment]
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
According to Documentation/devicetree/bindings/sound/dialog,da7219.yaml,
the value of `dlg,jack-det-rate` property should be "32_64" instead of
"32ms_64ms".
Fixes: dc0ff0fa3a ("ASoC: da7219: Add Jack insertion detection polarity")
Signed-off-by: Hsin-Te Yuan <yuanhsinte@chromium.org>
Link: https://lore.kernel.org/r/20240613-jack-rate-v2-1-ebc5f9f37931@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
