The tilcdc crtc implementation uses the deprecated
drm_atomic_helper_crtc_reset() as its reset hook.
Switch to drm_atomic_helper_crtc_create_state() instead.
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20260904-drm-no-more-crtc-reset-v3-5-27d9891512ce@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
The tilcdc crtc reset hook performs both atomic state initialization
using drm_atomic_helper_crtc_reset() and hardware-level register
writes to disable the raster and clear IRQ status.
The hardware reset is not related to atomic state initialization, and
the reset hook is being converted to atomic_create_state which only
deals with state allocation. Move the hardware reset to the hw_reset
helper hook instead.
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20260904-drm-no-more-crtc-reset-v3-4-27d9891512ce@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
The logicvc crtc implementation uses the deprecated
drm_atomic_helper_crtc_reset() as its reset hook.
Switch to drm_atomic_helper_crtc_create_state() instead.
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20260904-drm-no-more-crtc-reset-v3-3-27d9891512ce@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
The amdgpu vkms crtc implementation uses the deprecated
drm_atomic_helper_crtc_reset() as its reset hook.
Switch to drm_atomic_helper_crtc_create_state() instead.
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20260904-drm-no-more-crtc-reset-v3-2-27d9891512ce@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
The CRTC reset hook conflates initial software state allocation with
hardware reset. The atomic_create_state hook addresses the software
state side, but drivers may still need to reset hardware to a known good
state during drm_mode_config_reset(), for example during suspend/resume.
Separating hardware reset from state allocation is also useful for the
pending atomic state readout and userspace atomic reset flag series,
which need to create pristine software state without affecting the
hardware.
Introduce a hw_reset hook in struct drm_crtc_helper_funcs that only
resets the hardware, without touching the software state at all. Call it
from drm_mode_config_crtc_reset_with_create_state() after the state has
been successfully created.
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20260904-drm-no-more-crtc-reset-v3-1-27d9891512ce@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Convert gm12u320 to direct primary plane, CRTC and encoder setup.
Keep shadow-plane helper state, framebuffer access helpers and
no-scaling plane-state check from simple-KMS path.
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Ze Huang <ze.huang@oss.qualcomm.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260727-drm-simple-kms-removal-v3-5-cd5dc89858c6@oss.qualcomm.com
In commit dbe48d030b ("drm/sched: Split drm_sched_job_init") the only
use of the entity argument of drm_sched_fence_alloc(), fence->sched =
entity->rq->sched, moved into drm_sched_fence_init(), and the now unused
argument was left behind.
Drop the argument. The sole caller still passes the entity to
drm_sched_fence_init() at arm time, so behavior is unchanged. This also
removes the parameter-name mismatch between the declaration (s_entity)
and the definition (entity).
Signed-off-by: Donggeun Yoo <donggeunyoo.kernel@gmail.com>
Assisted-by: Claude:claude-fable-5
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://patch.msgid.link/20260910054537.633952-1-donggeunyoo.kernel@gmail.com
Currently, the driver supports register access mode for DSI command
transfer, which limits both TX and RX to only 16 Bytes long packets.
Implement support for DSI command TX using AXI memory access mode,
which extends the packet transfer length up to 128 Bytes long in LP
and 1024 Bytes long in HS. Support for DSI command RX using the AXI
access mode is not implemented due to missing test hardware.
The implementation allocates a DMAble 4k page. In case the command
transfer is longer than 16 Bytes, the payload is copied into the
page and sent out using the AXI access mode, otherwise the register
access mode is used.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Link: https://patch.msgid.link/20260910182003.31612-1-marek.vasut+renesas@mailbox.org
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Enabling DSI clocks on rcar-du needs some tricks as the DU dot clock is
provided by the DSI. Thus, we call rcar_mipi_dsi_pclk_enable() from the
crtc, when enabling the crtc.
With DSC in the pipeline, between the DU and the DSI, the above call
path is broken as the crtc tries to call rcar_mipi_dsi_pclk_enable() on
the DSC.
To solve this problem, make sure we store the DSI bridge to the
rcdu->dsi[] array, instead of the first bridge in the DSI pipeline
(which can be DSC), by checking the bridge's bridge->type.
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Link: https://patch.msgid.link/20260907-rcar-du-dsc-v6-3-f8ef711a7494@ideasonboard.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
The Renesas DSC Display Stream Compression is a bridge embedded in the
Renesas R-Car V4H SoC. The bridge performs VESA DSC encoding of up to
8k or 400 Mpixel/s. Add rudimentary driver, which currently acts as a
pass-through bridge and allows DSI1 to be operational on R-Car V4H.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
[tomi.valkeinen: use bridge->next_bridge, minor changes]
Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://patch.msgid.link/20260907-rcar-du-dsc-v6-2-f8ef711a7494@ideasonboard.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
The Renesas DSC Display Stream Compression is a bridge embedded in the
Renesas R-Car V4H SoC. The bridge performs VESA DSC encoding of up to
8k or 400 Mpixel/s.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
[tomi.valkeinen: fix the example]
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Link: https://patch.msgid.link/20260907-rcar-du-dsc-v6-1-f8ef711a7494@ideasonboard.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Add a new DRM_IVPU_PARAM_CMDQ_PRIORITY parameter to query and update
the scheduling priority of an existing command queue, identified by
its ID via drm_ivpu_param.index.
The priority can be changed on a queue that already has pending jobs;
if the queue's doorbell is registered, the new priority is propagated
to the firmware immediately, otherwise it is applied when the queue is
next registered. The firmware picks up the change at the first
opportunity.
The feature requires HW scheduling mode and is advertised through the
new DRM_IVPU_CAP_CMDQ_SET_PRIORITY capability. Legacy command queues
are not supported.
Signed-off-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com>
Reviewed-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Link: https://patch.msgid.link/20260831121617.395523-1-andrzej.kacprowski@linux.intel.com
Sysfb drivers currently use the given display mode for looking up the
panel orientation. But the look-up table stores the native geometry of
the panels, so the lookup fails if the current mode sizes differs.
Get the panel's native geometry with drm_edid_detect_panel_size() from
the EDID and use it for looking up the panel orientation.
v2:
- ofdrm: validate EDID header before using it (Sashiko)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patch.msgid.link/20260904090850.43060-4-tzimmermann@suse.de
Add drm_edid_detect_panel_size() to extract the panel's preferred
display resolution from a given EDID. Required for setting up DRM's
panel orientation quirks in sysfb drivers.
v4:
- fix test for EDID PTD (Jani)
v3:
- mention use case in documentation (Jani)
- use is_detailed_timing_descriptor() (Jani)
- rename helper to drm_edid_detect_panel_size()
v2:
- handle EDID without pixel timing descriptor (Sashiko)
- fix checks for width and height pointers
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patch.msgid.link/20260904090850.43060-3-tzimmermann@suse.de
The Lenovo D330 is a notebook with detachable display. The display
is installed in landscape orientation, but the display mode is in
portrait orientation. By default, the display output is rotated to
the left by 90°.
The sysfb quirk breaks the display by swapping display width and
height; and thus mixing up the display geometry. Fix this by keeping
the display as-is. The sysfb DRM drivers, usually efidrm, will pick
the correct panel orientation for the display.
The exact behavior might depend on the version of the BIOS release,
but the exact version numbers of broken and good releases are unknown.
Users are advised to update to the latest firmware.
Tested on a Lenovo D330-10IGM IdeaPad with firmware 8NCN43WW.
v3:
- mention possible dependency on BIOS release in commit description
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patch.msgid.link/20260904090850.43060-2-tzimmermann@suse.de
Do not send the vblank event when the page flip completes, but when
the vblank interrupt fires. Sending the vblank event at the wrong time
can break synchronization of the display update with the vblank period.
Use the vblank helper drm_crtc_vblank_atomic_flush(), which sets up
the vblank event accordingly. In case of an error, it still sends out
the vblank event immediately; thus not starving consumers.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Yongbang Shi <shiyongbang@huawei.com>
Link: https://patch.msgid.link/20260827082915.61176-3-tzimmermann@suse.de
Let the kernel know if hibmc did not handle an interrupt. Allows
the kernel to detect spurious interrupts and maintain diagnostics.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Yongbang Shi <shiyongbang@huawei.com>
Link: https://patch.msgid.link/20260827082915.61176-2-tzimmermann@suse.de
Add support for using SN65DSI84 in single-link mode with output to LVDS
Channel B.
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Esben Haabendal <esben@geanix.com>
Link: https://patch.msgid.link/20260831-ti-sn65dsi83-fixes-v5-2-e712765d6c4f@geanix.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Parse the optional 'data-lanes' device tree property to support
custom physical lane mapping configuration.
If no valid configuration is found, fall back to the default
lane map (0, 1, 2, 3) automatically and keep the driver running.
Lane mapping is mainly used for below scenarios:
1. Correct PCB lane swap and differential line routing crossover
without hardware changes;
2. Adapt mismatched lane pin definitions between SoC and eDP panel;
3. Support multiple panel hardware variants on the same board
by configuring data-lanes in device tree only.
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://patch.msgid.link/20260828065153.590802-6-damon.ding@rock-chips.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Revert the change that made samsung,link-rate and samsung,lane-count
optional for Exynos DP. Add error checking to fail probe early if the
required DT properties are missing.
If these properties are missing, video_info->max_link_rate and
video_info->max_lane_count remain zero, and so do link_train.link_rate
and link_train.lane_count used in the subsequent link training flow,
resulting in link training failure.
There is no way at all a device can work without these properties.
Here is the code flow when either max_link_rate or max_lane_count is 0:
analogix_dp_commit()
-> analogix_dp_full_link_train(dp, max_lanes = 0, max_rate = 0)
analogix_dp_full_link_train(max_lanes, max_rate):
// Read sink capabilities via DPCD and sanitize them
link_rate = read_dpcd(DP_MAX_LINK_RATE); // >= 0x06 after fixup
lane_count = read_dpcd(DP_MAX_LANE_COUNT); // >= 1 after fixup
// Clamp by the limits from DT
if (link_rate > max_rate) // 0x06 > 0, always true
link_rate = max_rate; // link_rate = 0
if (lane_count > max_lanes) // 1 > 0, always true
lane_count = max_lanes; // lane_count = 0
// Configure TX with the zeroed values
set_link_bandwidth(link_rate = 0)
// writel() is only executed for bwtype == 0x06/0x0a,
// so LINK_BW_SET is never written and stays at
// reset value; phy_configure() gets link_rate = 0.
set_lane_count(lane_count = 0)
// writel(0, ANALOGIX_DP_LANE_COUNT_SET) enables 0 lanes;
// phy_configure() is called with lanes = 0.
// Program sink for link training
drm_dp_dpcd_write(DP_LINK_BW_SET, {link_rate = 0/lane_count = 0})
// DP spec requires link rate in {0x06, 0x0a, 0x14} and
// lane count in {1, 2, 4}. Writing zeros is illegal, so
// the sink cannot enter the training state.
// Training loop
for (lane = 0; lane < lane_count /* 0 */; lane++)
// loop body never executes; training_lane[] stays
// uninitialized and no training register is programmed
Since the sanitized sink values are always non-zero (link_rate >= 0x06,
lane_count >= 1), the clamping with a zero maximum unconditionally
forces the training parameters to zero. Clock recovery can never be
achieved, so link training fails deterministically.
Consequently, making these properties mandatory again cannot break
any existing device: a DT without them could never have worked in
the first place. Failing probe early with a clear error message is
more helpful than a silent link training failure at runtime.
Fixes: 0d0abd894e ("drm: bridge: analogix/dp: add max link rate and lane count limit for RK3288")
Cc: stable@vger.kernel.org
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Link: https://patch.msgid.link/20260828065153.590802-4-damon.ding@rock-chips.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Add a generic helper function drm_dp_lane_count_is_valid() to check
if a DisplayPort lane count is valid. According to the DP specification,
only 1, 2, or 4 lanes are supported.
This helper avoids duplicating DP lane count validation logic across
individual DisplayPort drivers.
Suggested-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Link: https://patch.msgid.link/20260828065153.590802-3-damon.ding@rock-chips.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Add data-lanes property support to the port@1 endpoint for physical
lane mapping configuration.
Lane mapping is mainly used for below scenarios:
1. Correct PCB lane swap and differential line routing crossover
without hardware changes;
2. Adapt mismatched lane pin definitions between SoC and eDP panel;
3. Support multiple panel hardware variants on the same board
by configuring data-lanes in device tree only.
Additionally, add data-lanes setting in Rockchip eDP DT node example
to show actual lane mapping usage.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Link: https://patch.msgid.link/20260828065153.590802-2-damon.ding@rock-chips.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
drm_crtc_init() creates the primary plane from a fixed format list
that includes ARGB8888. The display engine programs the primary plane
with DISPPLANE_32BPP_NO_ALPHA, so it does not support per-pixel alpha
and must not advertise alpha formats. Since commit 860e748bdd
("drm: ensure blend mode supported if pixel format with alpha exposed"),
drm_mode_config_validate() warns about this at probe time.
Replace drm_crtc_init() with a driver-owned primary plane that
advertises only XRGB8888. The plane is allocated by
drmm_universal_plane_alloc() and the "pixel blend mode" property is
not needed because no format with alpha is exposed.
Signed-off-by: Shixiong Ou <oushixiong@kylinos.cn>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patch.msgid.link/20260903071149.423579-1-oushixiong1025@163.com
Device names for i2c_device_id are not OF compatibles and have a meaning
only for in-tree users (which there are no except the driver itself),
thus vendor prefix in this name is completely redundant.
It is actually a discouraged pattern because for OF platforms it allows
matching driver by I2C bus, instead of OF, thus hiding incomplete
way of obtaining driver match data (lack of i2c_get_match_data() usage).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://patch.msgid.link/20260825143921.512966-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
parse_hdmi_amd_vsdb() was removed when HDMI FreeSync detection moved to
the common EDID parser, but its declaration and KUnit tests remained,
breaking modpost:
ERROR: modpost: "parse_hdmi_amd_vsdb" [...connector_test.ko] undefined!
Remove the stale declaration and the three dead test cases.
Fixes: f65198b3d0 ("drm/amd/display: Use HDMI FreeSync range from common EDID parser")
Cc: Alex Huang <Alex.Huang2@amd.com>
Cc: Mario Limonciello <superm1@kernel.org>
Assisted-by: Copilot:Claude-Opus-5
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patch.msgid.link/20260820142802.1342066-2-rodrigo.vivi@intel.com
'ad->card' was removed in commit 9af2c1d4f8 ("ASoC: ti: omap-hdmi:
remove unused *card"), but commit 699e5975e2 ("drm/omap: Report HDMI
hotplug events to the ASoC HDMI codec") moved that code line. These
commits were applied to different trees, and the merge was not quite
right: assignment to 'ad->card' from the latter commit was left in the
file, causing:
sound/soc/ti/omap-hdmi.c:408:11: error: ‘struct hdmi_audio_data’ has no member named ‘card’
Fix the issue by removing the line.
Reported-by: Mark Brown <broonie@kernel.org>
Closes: https://lore.kernel.org/all/apbbvQSfUbzYRFaw@sirena.org.uk/
Fixes: 1ae7fe832c ("Merge drm/drm-next into drm-misc-next")
Reviewed-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
Link: https://patch.msgid.link/20260903-omap-hdmi-fix-v1-1-b0447a1d35d5@ideasonboard.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Backmerging to get drm-misc-next up to v7.3-rc2. Requested for
commit 3a2c4d55e3 ("treewide: refresh kmalloc_obj() conversions").
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
- Fix several tracefs files that did not take the trace_array reference
A trace instance can be created and destroyed in the tracefs "instances"
directory via mkdir and rmdir respectively. The instance is represented by
a trace_array descriptor. Most tracefs files pass the trace_array as the
private data of the inode to the open/read/write functions. Since there is
no locking between the time a task opens a file and the deletion of the
instance (and the freeing of the trace_array), each open needs to get a
reference to the trace_array and each close must remove it. A instance
can't be removed if there's any reference taken on its trace_array. The
open function uses trace_array_get() that takes a lock (preventing removal
of instances) and iterates the list of all existing trace_arrays and if it
finds a match, it takes the reference and releases the lock. If it doesn't
find a match, it causes the open to return -ENODEV.
There were some added files that did not take the trace_array reference
on open that needed to be fixed. Sashiko also correctly pointed out that
there were some files that took an address of an field or element of the
trace_array which had a pointer back to the trace_array to take its
reference on open. But this leaves a slight race between referencing this
element to get the trace_array as the element itself could be freed. To
solve this, some helper functions were created to look for trace_arrays
with this field or element in the search so that the element did not have
to be dereferenced before the trace_array's reference was taken.
- Add a lock around ftrace_ops initialization
When a ftrace_ops is first used by ftrace, some internal initialization is
performed on the ops. But if multiple tasks were calling functions that
did this initialization, it could race and perform doing the
initialization more than once, corrupting the internal data. Add a lock in
the initialization code to prevent this from happening.
- Fix splice reads on mmapped buffers
The logic in the ring buffer splice code for mmapped buffers is supposed
to do a copy of the memory as the mapped buffers can't be given to splice.
But there was an if statement within the copy code that would return a -1
if a request for a full page was done and it wasn't a partial read. This
is because this logic was written before mmapped buffers existed and this
case didn't make sense at the time. For mmapped buffers it makes perfect
sense and by returning early can drop a lot of pages unnecessarily.
- Have the persistent ring buffer validation check nr_subbufs
Sashiko reported that the validation code was relying on the saved
nr_subbufs to match the calculated nr_pages + 1 and if they were off, that
the code could cause corruption. Sashiko is correct, and the saved
nr_subbufs should be validated before assuming it is correct.
- Do not allow more than one instance with the same name on cmdline
If an admin were to add more than one trace instances with the same name
they all would be created, but only the first one would be accessible via
tracefs. This used to not be allowed but some restructuring of code has
since made it possible.
- Fix the race between subbuf resize and trace_pipe_raw readers
If a task was reading trace_pipe_raw while another task was changing the
ring buffer subbuf size, it could crash the reader. The trace_pipe_raw
readers do get their own copy of the page from the buffer, but the code
needs some restructuring to not have the resize of the subbuffers cause
issues.
- Cap the size of the mapped (static) ring buffer nr_pages
The meta data used for ring buffer mapped buffers is 32 bit in size. A
normal ring buffer could (in theory) have more than 4 billion pages.
But this is not allowed by mapped buffers, so enforce it.
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCap3GJRQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qtAfAP9hDPtzctAoz+IHZq+GYejhKTu99ICG
vAxTOZivuG6KYAD/UPA4P7z5ayxGM5UlT+2U81+mpCd55F2oFiIxRuFYcwk=
=/d+T
-----END PGP SIGNATURE-----
Merge tag 'trace-v7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix several tracefs files that did not take the trace_array reference
A trace instance can be created and destroyed in the tracefs
"instances" directory via mkdir and rmdir respectively. The instance
is represented by a trace_array descriptor.
Most tracefs files pass the trace_array as the private data of the
inode to the open/read/write functions. Since there is no locking
between the time a task opens a file and the deletion of the instance
(and the freeing of the trace_array), each open needs to get a
reference to the trace_array and each close must remove it.
An instance can't be removed if there's any reference taken on its
trace_array. The open function uses trace_array_get() that takes a
lock (preventing removal of instances) and iterates the list of all
existing trace_arrays and if it finds a match, it takes the reference
and releases the lock. If it doesn't find a match, it causes the open
to return -ENODEV.
There were some added files that did not take the trace_array
reference on open that needed to be fixed. Sashiko also correctly
pointed out that there were some files that took an address of an
field or element of the trace_array which had a pointer back to the
trace_array to take its reference on open. But this leaves a slight
race between referencing this element to get the trace_array as the
element itself could be freed. To solve this, some helper functions
were created to look for trace_arrays with this field or element in
the search so that the element did not have to be dereferenced before
the trace_array's reference was taken.
- Add a lock around ftrace_ops initialization
When a ftrace_ops is first used by ftrace, some internal
initialization is performed on the ops. But if multiple tasks were
calling functions that did this initialization, it could race and
perform doing the initialization more than once, corrupting the
internal data. Add a lock in the initialization code to prevent this
from happening.
- Fix splice reads on mmapped buffers
The logic in the ring buffer splice code for mmapped buffers is
supposed to do a copy of the memory as the mapped buffers can't be
given to splice. But there was an if statement within the copy code
that would return a -1 if a request for a full page was done and it
wasn't a partial read. This is because this logic was written before
mmapped buffers existed and this case didn't make sense at the time.
For mmapped buffers it makes perfect sense and by returning early can
drop a lot of pages unnecessarily.
- Have the persistent ring buffer validation check nr_subbufs
Sashiko reported that the validation code was relying on the saved
nr_subbufs to match the calculated nr_pages + 1 and if they were off,
that the code could cause corruption. Sashiko is correct, and the
saved nr_subbufs should be validated before assuming it is correct.
- Do not allow more than one instance with the same name on cmdline
If an admin were to add more than one trace instances with the same
name they all would be created, but only the first one would be
accessible via tracefs. This used to not be allowed but some
restructuring of code has since made it possible.
- Fix the race between subbuf resize and trace_pipe_raw readers
If a task was reading trace_pipe_raw while another task was changing
the ring buffer subbuf size, it could crash the reader. The
trace_pipe_raw readers do get their own copy of the page from the
buffer, but the code needs some restructuring to not have the resize
of the subbuffers cause issues.
- Cap the size of the mapped (static) ring buffer nr_pages
The meta data used for ring buffer mapped buffers is 32 bit in size.
A normal ring buffer could (in theory) have more than 4 billion
pages. But this is not allowed by mapped buffers, so enforce it.
* tag 'trace-v7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ring-buffer: Use a macro for static buffer bits
tracing: Fix comment in tracing_buffers_splice_read()
ring-buffer: Prevent truncation of nr_pages / nr_subbufs
ring-buffer: Cap static ring buffer nr_pages
tracing: Fix subbuf resize races with trace_pipe_raw readers
tracing: Fix to avoid creating trace instances with duplicate names
ring-buffer: Add checking nr_subbufs to persistent ring buffer validation
ring-buffer: Allow splice reads on static buffers
tracing: Take trace_array reference when opening options file
ftrace: Synchronize the initialization of ftrace_ops
ftrace: Take trace_array reference before accessing its ftrace_ops
tracing: Have show_event_filters/triggers files take trace array ref
-----BEGIN PGP SIGNATURE-----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=oz4Z
-----END PGP SIGNATURE-----
Merge tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Pull bpf fixes from Alexei Starovoitov:
"This mainly contains verifier fixes that address bugs reported by
Nicholas Carlini.
- Fix incorrect non-NULL inference in pointer comparisons: pointer
types that may be NULL at runtime, pointers with unbounded offsets,
JMP32 comparisons with zero, and imprecise zero registers (Eduard
Zingerman)
- Fix precision tracking for half-dead zero spills, ld_abs/ld_ind
implicit subprog exit, bpf_loop() callbacks, linked scalar ids and
NULL call arguments (Eduard Zingerman)
- Reject BPF_PSEUDO_FUNC reference to the main program, fix zero
extension of arena 32-bit cmpxchg, don't rewrite bpf_fastcall
patterns entered by a jump (Eduard Zingerman)
- Fix percpu map update and BPF_F_CPU validation with sparse CPU IDs
(Hui Su)
- Fix NULL-ptr-derefs in bpf_snprintf_btf() for void and VAR types,
and reject key-less BTF for hash maps (Jiayuan Chen)
- Various fixes (Kumar Kartikeya Dwivedi):
- Fix out-of-bounds access in disassembler on invalid LDSX
instruction
- mark siginfo of signal tracepoints as scalar and
sched_process_wait argument as nullable
- mark faultable stack helpers as sleepable
- reject tail calls and legacy packet loads from callbacks
- enforce rbtree callback lock restrictions for resilient locks
- require MEM_PERCPU for percpu kptr stores
- clear NON_OWN_REF after RCU protection ends
- mark NULL kptr stores precise
- preserve inner map identity in callback frames
- reject non-scalar bpf_loop() iteration counts
- Fix trampoline allocation slowdown on x86 by using
EXECMEM_MODULE_DATA (Mike Rapoport)
- Keep bpf_refcount_acquire() nullable for borrowed RCU kptrs and
reject untrusted allocated-object pointers (Ning Ding)
- Fix special fields handling in recycled rhtab elements (Nuoqi Gui,
Yuan Chen)"
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: (86 commits)
bpf, riscv: Make arena support depend on ZACAS
selftests/bpf: Test pointer bpf_loop iteration count rejection
bpf: Reject non-scalar bpf_loop iteration counts
bpf: use mark_arg_precision() in check_mem_size_reg()
bpf: propagate mark_chain_precision() errors out of loop_flag_is_zero()
selftests/bpf: precision of a NULL global subprogram BTF_ID argument
bpf: mark a NULL BTF_ID argument of a global subprogram precise
selftests/bpf: precision of a NULL kfunc argument
bpf: mark a NULL kfunc argument precise
selftests/bpf: precision of a NULL global subprogram memory argument
bpf: mark a NULL memory argument of a call precise
selftests/bpf: precision of a NULL helper argument
bpf: mark a NULL call argument precise
selftests/bpf: Test inner map identities in callbacks
bpf: Preserve inner map identity in callback frames
selftests/bpf: Test imprecise scalar kptr stores
bpf: Mark NULL kptr stores precise
selftests/bpf: Test rhtab kptr cancellation semantics
bpf: Cancel special fields when recycling rhtab elements
selftests/bpf: Test timer field on recycled rhtab element
...
- Fix a timestamping bug in pick_task_fair() and
yield_task_fair() (Zhan Xusheng)
- Skip migrate-disabled tasks when picking a push
candidate in the RT and DL schedulers (Seiji Nishikawa)
- Skip rq->avg_idle update without a valid idle_stamp
(Shubhang Kaushik)
- Fix throttling bug in throttle_cfs_rq(), caused
by the recent single-runqueue conversion (Wanwu Li)
- Fix bandwidth calculation bug in distribute_cfs_runtime(),
caused by the single-runqueue conversion (Wanwu Li)
- Don't make x86 ITMT enablement depend on debugfs (Mario Limonciello)
- Avoid creating misfits during cache-aware load-balancing
on hybrid systems (Tim Chen)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=8l0J
-----END PGP SIGNATURE-----
Merge tag 'sched-urgent-2026-09-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
- Fix a timestamping bug in pick_task_fair() and yield_task_fair()
(Zhan Xusheng)
- Skip migrate-disabled tasks when picking a push candidate in the
RT and DL schedulers (Seiji Nishikawa)
- Skip rq->avg_idle update without a valid idle_stamp (Shubhang
Kaushik)
- Fix throttling bug in throttle_cfs_rq(), caused by the recent
single-runqueue conversion (Wanwu Li)
- Fix bandwidth calculation bug in distribute_cfs_runtime(),
caused by the single-runqueue conversion (Wanwu Li)
- Don't make x86 ITMT enablement depend on debugfs (Mario Limonciello)
- Avoid creating misfits during cache-aware load-balancing on hybrid
systems (Tim Chen)
* tag 'sched-urgent-2026-09-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Avoid creating misfits during cache-aware balancing
x86/itmt: Don't make ITMT enablement depend on debugfs
sched/fair: Use cfs_rq->h_curr in distribute_cfs_runtime()
sched/fair: Use cfs_rq->h_curr in throttle_cfs_rq()
sched/core: Skip rq->avg_idle update without a valid idle_stamp
sched/rt,dl: Skip migrate-disabled tasks when picking a push candidate
sched/fair: Use update_curr_eevdf() for the remaining root cfs_rq callers
- Skip empty AUX records with only format flags
(Leo Yan)
- Fix use-after-free when perf mmap() revival races with the
last munmap() (Yilin Zhang, Weiming Shi)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Ffvz
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-2026-09-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf events fixes from Ingo Molnar:
- Skip empty AUX records with only format flags (Leo Yan)
- Fix use-after-free when perf mmap() revival races with the
last munmap() (Yilin Zhang, Weiming Shi)
* tag 'perf-urgent-2026-09-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: Fix use-after-free when perf mmap() revival races with the last munmap()
perf/core: Skip empty AUX records with only format flags
- Fix a softirq processing delay bug in local_interrupt_disable(),
which should mostly only affect the Rust runtime (Boqun Feng)
- Remove the hardirq_disable_count() function which caused the
previous bug and is now unused & unnecessary (Boqun Feng)
- lockdep: Invalidate stale class_cache entries for zapped classes
(Eric Dumazet)
- Fix rt_mutex specific futex scheduling helpers
(Sebastian Andrzej Siewior)
- Fix rcuwait use-after-free race during futex requeue PI (Yao Kai)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=vEuZ
-----END PGP SIGNATURE-----
Merge tag 'locking-urgent-2026-09-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fixes from Ingo Molnar:
- Fix a softirq processing delay bug in local_interrupt_disable(),
which should mostly only affect the Rust runtime (Boqun Feng)
- Remove the hardirq_disable_count() function which caused the
previous bug and is now unused & unnecessary (Boqun Feng)
- lockdep: Invalidate stale class_cache entries for zapped classes
(Eric Dumazet)
- Fix rt_mutex specific futex scheduling helpers
(Sebastian Andrzej Siewior)
- Fix rcuwait use-after-free race during futex requeue PI (Yao Kai)
* tag 'locking-urgent-2026-09-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
futex: Prevent rcuwait use-after-free during requeue PI
futex: Provide rt_mutex_.*_schedule() equivalents for futex scheduling
locking/lockdep: Invalidate stale class_cache entries for zapped classes
preempt: Remove hardirq_disable_count()
interrupt: Disable interrupt before modifying hardirq_disable counter
- Revert a commit to the mbigen irqchip driver that caused
a regression on two-port Hi1616 chips (Caina)
- Fix a too-long-preemption-off bug in the stm32mp-exti
irqchip driver, caused by a time unit ambiguity & mismatch (Ju Nan)
- Remove the now completely unused irq_domain_add_linear()
inline function (Jiri Slaby)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=54qE
-----END PGP SIGNATURE-----
Merge tag 'irq-urgent-2026-09-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull IRQ subsystem fixes from Ingo Molnar:
- Revert a commit to the mbigen irqchip driver that caused
a regression on two-port Hi1616 chips (Caina)
- Fix a too-long-preemption-off bug in the stm32mp-exti
irqchip driver, caused by a time unit ambiguity & mismatch
(Ju Nan)
- Remove the now completely unused irq_domain_add_linear()
inline function (Jiri Slaby)
* tag 'irq-urgent-2026-09-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/stm32mp-exti: Fix the unit of the hwspinlock timeout
Revert "irqchip/mbigen: Fix mbigen node address layout"
irqdomain: Delete irq_domain_add_linear()
Here is a single virtio console fix for 7.3-rc2 to fix a much reported
regression in 7.3-rc1, sorry about that. It's not been in linux-next,
but it has been sent by many different developers to resolve the issue
and is "obviously" correct.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCap0yag8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykbSwCcDmF2b0gZnZY3LaaJjdryq8yXP8cAnjEGPEl9
OcipLpPGvj6dq+5Xv2qE
=5+1N
-----END PGP SIGNATURE-----
Merge tag 'tty-7.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull virtio console fix from Greg KH:
"Here is a single virtio console fix for 7.3-rc2 to fix a much reported
regression in 7.3-rc1, sorry about that. It's not been in linux-next,
but it has been sent by many different developers to resolve the issue
and is 'obviously' correct"
* tag 'tty-7.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
virtio_console: allocate the port_buffer with the caller's gfp
Here are some small staging driver fixes to resolve some reported bugs
that have been found, and tested, in a few staging drivers in 7.3-rc1.
Included in here are:
- OOB read problem fixes in the rtl8723bs driver
- fbtft driver fix
- sm750fb driver fix
All of these have been in linux-next this week with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCap0zHA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylsuwCfc6ycZ0QbcKpiDZpzijDTduvUh1IAnAky4xi7
rNKgULapaYP63Mt0exzR
=Cajg
-----END PGP SIGNATURE-----
Merge tag 'staging-7.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are some small staging driver fixes to resolve some reported bugs
that have been found, and tested, in a few staging drivers in 7.3-rc1.
Included in here are:
- OOB read problem fixes in the rtl8723bs driver
- fbtft driver fix
- sm750fb driver fix
All of these have been in linux-next this week with no reported
problems"
* tag 'staging-7.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: sm750fb: fix mono image source stride mismatch in lynxfb_ops_imageblit()
staging: rtl8723bs: fix OOB read in rtw_restruct_wmm_ie()
staging: rtl8723bs: fix OOB read in rtw_action_frame_parse()
staging: rtl8723bs: fix OOB read / stack overflow in rtw_get_wps_attr()
staging: fbtft: make dirty_lock IRQ-safe
Here are some small USB driver fixes for reported problems and
regressions. Include in here are:
- xhci driver fixes
- cdns3 driver fixes
- usb gadget driver fixes for syzbot found problems
- typec driver fixes for broken hardware and other bugs found
- kernel data leaks in mdc800 driver
- usb storage driver fixes
- other small USB driver fixes
All of these have been in linux-next this week with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCap0z6Q8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynS5QCfbHGkxWTxkZ5dhvMn0Xs4/+ekE1QAn35xFYmZ
SzXW+Kqkf7nMhxHo9yj0
=L8pK
-----END PGP SIGNATURE-----
Merge tag 'usb-7.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB driver fixes for reported problems and
regressions. Include in here are:
- xhci driver fixes
- cdns3 driver fixes
- usb gadget driver fixes for syzbot found problems
- typec driver fixes for broken hardware and other bugs found
- kernel data leaks in mdc800 driver
- usb storage driver fixes
- other small USB driver fixes
All of these have been in linux-next this week with no reported
issues"
* tag 'usb-7.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (25 commits)
usb: typec: qcom-pmic-typec: drain cc_debounce_dwork if port_start() fails
usb: typec: qcom-pmic-typec: disable cc_debounce_dwork on stop
usb: gadget: fix null pointer dereference in usb_put_function_instance()
usb: typec: qcom-pmic: cancel reset_work on stop
usb: gadget: f_mass_storage: fix null pointer dereference in fsg_common_set_num_buffers()
usb: f_mass_storage: Bump local buffer size in fsg_common_create_luns()
usb: storage: realtek_cr: fix use-after-free on disconnect
usb: cdnsp: fix wakeup from S3 after controller context loss
usb-storage: ene_ub6250: fix race between scan work and probe
USB: gadget: fix NULL pointer dereference in gadget_dev_ioctl()
usb: gadget: f_midi: initialize work in f_midi_alloc()
usb: gadget: f_midi2: fix use-after-free in string attribute show path
usb: typec: tipd: Fix Thunderbolt altmode VDOs for cd321x
usb: gadget: midi2: Fix null-pointer dereference in f_midi2_free_ep_reqs
usb: typec: hd3ss3220: track VBUS enable state per consumer
usb: dwc3: clear forceRM when issuing EndTransfer
usb: dwc3: google: Initialise probe properties with DWC3_DEFAULT_PROPERTIES
usb: typec: mux: avoid duplicated mux switches
usb: typec: mux: Fix typec_switch_match()
usb: image: mdc800: change kmalloc() to kzalloc()
...
The arena range tree allocates its nodes with kmalloc_nolock() since
commit f8c67d8550 ("bpf: Use kmalloc_nolock() in range tree").
kmalloc_nolock() requires slab caches with cmpxchg128 support
(__CMPXCHG_DOUBLE); on riscv cmpxchg128 is provided by the ZACAS
extension. On systems without ZACAS every arena map creation fails
with a misleading -ENOMEM.
Report the missing support instead: make bpf_jit_supports_arena()
return system_has_cmpxchg128() where it is defined, so arena map
creation fails with -EOPNOTSUPP on systems without ZACAS. The macro
is only defined when both CONFIG_RISCV_ISA_ZACAS and
CONFIG_TOOLCHAIN_HAS_ZACAS are enabled, so guard it with #ifdef the
same way mm/slab.h consumes it, and reject arena otherwise. This
matches how arena BPF_CMPXCHG instructions are already gated on ZACAS
in bpf_jit_supports_insn().
Fixes: f8c67d8550 ("bpf: Use kmalloc_nolock() in range tree")
Signed-off-by: Chen Pei <cp0613@linux.alibaba.com>
Acked-by: Pu Lehui <pulehui@huawei.com>
Acked-by: Björn Töpel <bjorn@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/bpf/20260902061451.1416-1-cp0613@linux.alibaba.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Add a verifier test that leaves the raw tracepoint context pointer in R1
when calling bpf_loop(). This is the smallest trigger for the incorrect
precision backtracking: it reuses an existing callback and needs no maps or
userspace setup.
Expect an ordinary scalar-type rejection. Without the verifier fix, the
test instead reaches precision backtracking and reports an internal
"backtracking misuse" error.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://patch.msgid.link/20260905014735.1452988-3-memxor@gmail.com
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
bpf_loop() declares its nr_loops argument as ARG_ANYTHING. Privileged
programs may pass pointer values to such arguments, so check_func_arg()
lets a pointer-valued R1 reach the helper-specific checks.
Since commit bb124da69c ("bpf: keep track of max number of bpf_loop
callback iterations"), the verifier marks R1 precise and reads its upper
bound to limit callback simulation. Precision backtracking only accepts
scalar registers, so passing a pointer instead triggers the "backtracking
misuse" verifier warning. Kernels with panic_on_warn enabled subsequently
panic.
Introduce ARG_SCALAR for helper arguments that only accept scalar values
and use it for bpf_loop() nr_loops. Generic helper argument validation then
rejects pointers before loop inlining and precision processing.
Fixes: bb124da69c ("bpf: keep track of max number of bpf_loop callback iterations")
Reported-by: syzbot+7b47f87674e9a1569110@syzkaller.appspotmail.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://patch.msgid.link/20260905014735.1452988-2-memxor@gmail.com
Closes: https://lore.kernel.org/bpf/6a9ad24c.b5d4176b.238c3e.0001.GAE@google.com/
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
- Run scripts/coccinelle/api/kmalloc_objs.cocci for v7.3
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRSPkdeREjth1dHnSE2KwveOeQkuwUCapuwVwAKCRA2KwveOeQk
u5EeAP9TS7K4iVlw3KlZHuLIK2q+CQfALPepcu+ME2lO5dta4gEAxCTi0ZXmU7OT
XbmWUd+DTkKNYCBW8E6Lvn72Er13uQs=
=ZtN4
-----END PGP SIGNATURE-----
Merge tag 'kmalloc_obj-v7.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull kmalloc_obj conversions from Kees Cook:
"Another run of the Coccinelle script for converting kmalloc()
family of allocations to kmalloc_obj() via the existing rules
in scripts/coccinelle/api/kmalloc_objs.cocci"
* tag 'kmalloc_obj-v7.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
treewide: refresh kmalloc_obj() conversions
drm/amd/display: Fix harmless type mismatch in allocation
- Fix kernfs listxattr() not returning security xattr names (e.g.
SELinux labels) when the kernfs node has no allocated kernfs_iattrs
- Fix silent truncation of IRQ vector indices in the Rust PCI
abstractions
- Don't select OF from DRIVER_PE_KUNIT_TEST; skip the test when OF is
disabled instead of silently enabling extra kernel functionality
- Russ Weight is retiring from kernel development; update the Firmware
Loader sysfs contact to the driver-core mailing list, add a CREDITS
entry for Firmware Upload, and update MAINTAINERS accordingly
-----BEGIN PGP SIGNATURE-----
iHQEABYKAB0WIQS2q/xV6QjXAdC7k+1FlHeO1qrKLgUCapxQTQAKCRBFlHeO1qrK
Lr1NAQD09hhWzsAkRvdDgf/rd3iUW4Fxro/KOIf+OThNRgWpRQD4+hMNQqxzk3OB
QT3xFMqLPFtLf+voWTcWniC6UsLfCA==
=k/Gx
-----END PGP SIGNATURE-----
Merge tag 'driver-core-7.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core fixes from Danilo Krummrich:
- Fix kernfs listxattr() not returning security xattr names (e.g.
SELinux labels) when the kernfs node has no allocated kernfs_iattrs
- Fix silent truncation of IRQ vector indices in the Rust PCI
abstractions
- Don't select OF from DRIVER_PE_KUNIT_TEST; skip the test when OF is
disabled instead of silently enabling extra kernel functionality
- Russ Weight is retiring from kernel development; update the Firmware
Loader sysfs contact to the driver-core mailing list, add a CREDITS
entry for Firmware Upload, and update MAINTAINERS accordingly
* tag 'driver-core-7.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core:
MAINTAINERS: Remove Russ Weight from Firmware Loader
CREDITS: Add CREDITS entry for Firmware Upload
firmware_loader: Change contact for sysfs nodes
rust: pci: reject IRQ vector indices that do not fit in u32
kernfs: preserve security xattrs without allocating iattrs
drivers: base: test: DRIVER_PE_KUNIT_TEST should not select OF
-----BEGIN PGP SIGNATURE-----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=SgJ4
-----END PGP SIGNATURE-----
Merge tag 'loongarch-fixes-7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch fixes from Huacai Chen:
- Fix build errors when RUST and KASAN enabled
- fix a typo in comment of vmlinux.lds.S
- fix several bugs in Kprobes, BPF JIT and KVM support
* tag 'loongarch-fixes-7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
perf build: Add clang and rust target flags for LoongArch
LoongArch: KVM: Fix TOCTOU race on pv_features
LoongArch: KVM: Validate MSI data before routing it to EIOINTC
LoongArch: KVM: Preserve memslot arch flags on KVM_MR_FLAGS_ONLY
LoongArch: KVM: Remove unused function kvm_arch_flush_remote_tlbs_memslot()
LoongArch: KVM: Fix resource leak in kvm_loongarch_env_init() error path
LoongArch: KVM: Add unregister helpers for the KVM interrupt devices
LoongArch: KVM: Free init resources if kvm_init() fails
LoongArch: BPF: Fix off-by-one error for insn_is_cast_user()
LoongArch: Avoid preempt count underflow without probe
LoongArch: Do not save/restore percpu base register in rethook trampoline
LoongArch: Remove unused setup_profiling_timer() function
LoongArch: Fix typo "avaliable" in comment of vmlinux.lds.S
LoongArch: Do not select HAVE_RUST when KASAN is enabled
put_chars() runs from the hvc console write path with preemption
disabled, so it asks alloc_buf() for GFP_ATOMIC. Only the data buffer
gets it: the struct port_buffer itself keeps the GFP_KERNEL default, so
the allocation can enter direct reclaim and sleep. A write to /dev/kmsg
on a CONFIG_DEBUG_ATOMIC_SLEEP kernel splats:
BUG: sleeping function called from invalid context at ./include/linux/sched/mm.h:320
in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 1, name: virtme-ng-init
preempt_count: 1, expected: 0
Preemption disabled at:
[<ffffffff813fd90d>] vprintk_emit+0x17d/0x510
Call Trace:
<TASK>
dump_stack_lvl+0x69/0xa0
__might_resched+0x37a/0x4d0
__kmalloc_cache_noprof+0x94/0x5f0
put_chars+0x209/0x3e0
hvc_console_print+0x234/0x640
console_flush_all+0x4fc/0x950
console_unlock+0xbf/0x1b0
vprintk_emit+0x312/0x510
devkmsg_emit+0xba/0x110
devkmsg_write+0x21b/0x2e0
vfs_write+0x4dc/0x9d0
ksys_write+0x108/0x1e0
do_syscall_64+0xfa/0x460
</TASK>
Pass gfp on to that allocation too.
Fixes: fc220d6be3 ("virtio_console: refactor __send_to_port() buffer ownership")
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Sungho Bae <baver.bae@lge.com>
Tested-by: Florian Westphal <fw@strlen.de>
Link: https://patch.msgid.link/20260810-serial-v1-1-abbe51602c13@debian.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----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=z6qW
-----END PGP SIGNATURE-----
Merge tag 'for-7.3-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- preserve inode compression level when changing attributes
- fix lost wakeup when waiting for a zstd workspace
- fix bio context leaks after ordered extent processing errors
- in send, handle unexpected extents for non-regular inodes
- handle edge case in creation of reloc tree with enabled quotas
- in scrub report the exact failing offset, not the stripe base
- error handling fixes
- error code propagation in send, zoned mode and raid-stripe-tree
- restore active device pointer after seeding device addition error
- transaction abort fixups
- update Chris' email address
* tag 'for-7.3-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
MAINTAINERS: update Chris Mason's email address
btrfs: tests: do not touch page cache if root/inode allocation failed
btrfs: zstd: fix lost wakeup when waiting for a workspace
btrfs: do not force reloc root creation during qgroup_account_snapshot()
btrfs: send: fix lost error return value in will_overwrite_ref()
btrfs: abort transaction before releasing tree_log_mutex on commit failure
btrfs: zoned: propagate do_zone_finish() error in btrfs_zone_finish_endio()
btrfs: zoned: finish active block group cleanup if call_zone_finish() fails
btrfs: send: reject extents for non-regular inodes
btrfs: return proper negative error code for update_raid_extent_item()
btrfs: fix the possible bioc_list memory leak during error
btrfs: fix transaction use-after-free in raid stripe insertion
btrfs: scrub: report the failing sector's address, not the stripe base
btrfs: preserve the compression property when other inode flags change
btrfs: restore active device pointers after failed sprout
btrfs: detach failed sprout device from transaction update list
btrfs: clean up target device if block group marking fails
2 enhancements to add support and MCQ for additional Intel 4.0
controller types. The rest are all driver fixes, the largest of which is
the mpi3mr target use after free fix, follwed by a similar TOCTOU fix
for io_uring passthrough in bsg.
Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
-----BEGIN PGP SIGNATURE-----
iLgEABMIAGAWIQTnYEDbdso9F2cI+arnQslM7pishQUCapw/mRsUgAAAAAAEAA5t
YW51MiwyLjUrMS4xMiwyLDImHGphbWVzLmJvdHRvbWxleUBoYW5zZW5wYXJ0bmVy
c2hpcC5jb20ACgkQ50LJTO6YrIXurAD7BFNaHlTRLIlurYSeMYOV0ZVQQXR9GsW8
1KQhJW1W6GABAIr7L81Gm1jTUa+CuXixW2N9tv8PBsXx627eWyRZ7tyb
=9pG9
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Two enhancements to add support and MCQ for additional Intel 4.0
controller types.
The rest are all driver fixes, the largest of which is the mpi3mr
target use after free fix, follwed by a similar TOCTOU fix for
io_uring passthrough in bsg"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: megaraid_sas: Limit NVMe request size to the PRP chain frame
scsi: bsg: Fix TOCTOU in io_uring passthrough command setup
scsi: bsg: Cap io_uring sense copy to max_response_len
scsi: mpt3sas: Avoid out-of-bounds cpumask_of_node() call in _base_assign_reply_queues()
scsi: mpi3mr: Fix use-after-free on tgt_dev->starget during target device refresh/update
scsi: target: iscsi: Reserve a terminator byte for the login payload
scsi: target: iscsi: Fix hang for aborted WRITE_PENDING commands
scsi: ufs: ufs-pci: Add MCQ support for Intel UFS 4.0 controllers
scsi: ufs: ufs-pci: Add support for Intel UFS 4.0 HS-Gear5
scsi: sg: Report request-table problems when any status is set
scsi: mpi3mr: Fix target device refcount leak in mpi3mr_sas_port_add()
scsi: mpi3mr: Fix NULL pointer dereference in mpi3mr_sas_port_add()
scsi: ufs: ufs-qcom: Fix sequential read variance
scsi: ufs: ufs-qcom: Restore HS/LS link startup mode for Qualcomm UFS controller v6.2+
scsi: ibmvfc: Document protocol parameter of ibmvfc_alloc_target()
scsi: ibmvfc: Fix kernel-doc name for ibmvfc_scsi_relogin()
scsi: pm8001: Use rollback index when freeing MSI-X vectors
scsi: fnic: Initialize the NVMe local port info before registering
-----BEGIN PGP SIGNATURE-----
iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmqb+cYQHGF4Ym9lQGtl
cm5lbC5kawAKCRD301j7KXHgpjBkEACTFzHAVopJbtKT6+Rg9esQNPUDfeJkJy/L
3v8Vi4R7tozAB0IKc58RxV2YFMvga5teWJkAnd33983/MbwCzj9B0oRjSmnHf8K5
pq4gu1f5pdyfRXGGAnI6ZMom1MNsfuWWiZmD8vQuQ+q4qNVSnQBg0UjrDggDlcW6
o6EtyjgqAwaaGs+sWgxgy0sYWV7TMiCx4+AZR0TDm8cN3LXyOkOp2abgR35/tnDB
fs3kUPTkBC4rCZK2uVUhgF6Wctcd2qIF6AEP+bBbWifSCI/jmqAYHk/0IM1xpn8e
XXPO43X5Iad5iiMWMHlku9G7ZjTo/K2bLc1n9F4IlNZgVPAcF9qtYok5Uc3ghldg
/qOsclI8D2feQ5j6u060FdnN99+TSHcS3h4roa8jIPNojmh5orw2xRiDCvSVG3au
+UfEUWnf0JjsmJfX9HCQyV6oTB/7IeiSI+4akHXobCnsG4n9BL8kZ1HR8qwPWsYj
HPeLHraPljX2slDj+X9EFA8AyxgU33HC9JbjvLlN4L2amX+7Jtwb3A7MlKrGEuUP
gzybtHk5g17/mcYVj9N2k4tHECR1aZChTQcfNdCctMVB3vXk3KKkFsZstJapCVmT
fSKx7pdrrNwo3WoKzn8xp/+2gcrRRo4AhSCg9oVfloc5nSFkyfPpq0vPspsUj3ib
4ze4Sy2TiQ==
=4ZE+
-----END PGP SIGNATURE-----
Merge tag 'block-7.3-20260905' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block fixes from Jens Axboe:
- NVMe fixes via Keith:
- nvme-tcp fixes for an out-of-bounds write on an over-long PDU
- nvmet-tcp, nvmet-rdma and nvme-rdma leak and cleanup-ordering
fixes
- FDP placement id array racy access fix
- nvme-fc double free of fabrics options on nvme_add_ctrl()
failure, and a secret leak failure
- Fault injection opcode filtering
- stale namespace removal during scan
- Various other smaller fixes and cleanups
- Flag zoned disks with GENHD_FL_NO_PART
- Save the page offset gaps in a cloned bio
- Fix dma_alignment for large or unreported limits in loop and zloop
- Clear VM_MAYWRITE on a read-only ublk char device mmap
* tag 'block-7.3-20260905' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: (25 commits)
nvme-tcp.h: drop kernel-doc comments, fix a few descriptions
nvme-fc: fix double free of fabrics options when nvme_add_ctrl() fails
nvmet: reject namespace enable without device path
nvmet-auth: Synchronize timeout work during SQ teardown
MAINTAINERS: update nvme entry
nvmet-tcp: reject unsolicited H2CData PDUs
nvme-tcp: defer TLS inline send to io_work
nvmet-tcp: fix out-of-bounds write when receiving an over-long PDU
nvme-tcp: return -EPROTO for a C2HData on a write
nvmet: print namespace IDs as unsigned 32bit value
nvme: print namespace IDs as unsigned 32bit value
nvme: remove stale namespaces by NSID range during scan
nvme: add missing SRCU grace period in error path
nvme-fabrics: fix DHCHAP secret leak on parse failure
ublk: clear VM_MAYWRITE on read-only ublk char device mmap
loop, zloop: fix dma_alignment for large or unreported limits
block: save page offset gaps in cloned bio
block: flag zoned disks with GENHD_FL_NO_PART
nvmet-rdma: fix queue leak when connect backlog is exceeded
nvme: add opcode filtering for fault injection
...
