[ Upstream commit f2537be4f8 ]
When forcefully shutting down a port via the configfs interface,
nvmet_port_subsys_drop_link() first calls nvmet_port_del_ctrls() and
then nvmet_disable_port(). Both functions will eventually schedule all
remaining associations for deletion.
The current implementation checks whether an association is about to be
removed, but only after the work item has already been scheduled. As a
result, it is possible for the first scheduled work item to free all
resources, and then for the same work item to be scheduled again for
deletion.
Because the association list is an RCU list, it is not possible to take
a lock and remove the list entry directly, so it cannot be looked up
again. Instead, a flag (terminating) must be used to determine whether
the association is already in the process of being deleted.
Reported-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Closes: https://lore.kernel.org/all/rsdinhafrtlguauhesmrrzkybpnvwantwmyfq2ih5aregghax5@mhr7v3eryci3/
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6dbcd5a9ab ]
A TEE driver doesn't always need to provide a pool if it doesn't
support memory sharing ioctls and can allocate memory for TEE
messages in another way. Although this is mentioned in the
documentation for tee_device_alloc(), it is not handled correctly.
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Signed-off-by: Amirreza Zarrabi <amirreza.zarrabi@oss.qualcomm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e9dff11a7a ]
When deleting the previous walkstate operand stack
acpi_ds_call_control_method() was deleting obj_desc->Method.param_count
operands. But Method.param_count does not necessarily match
this_walk_state->num_operands, it may be either less or more.
After correcting the for loop to check `i < this_walk_state->num_operands`
the code is identical to acpi_ds_clear_operands(), so just outright
replace the code with acpi_ds_clear_operands() to fix this.
Link: 53fc0220
Signed-off-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 08b68ca543 ]
For Qualcomm SoCs which needs level shifter for SD card, extra delay is
seen on receiver data path.
To compensate this delay enable tuning for SDR50 mode for targets which
has level shifter. SDHCI_SDR50_NEEDS_TUNING caps will be set for targets
with level shifter on Qualcomm SOC's.
Signed-off-by: Sarthak Garg <quic_sartgarg@quicinc.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3cc9a8cada ]
When SHM bridge is enabled, assigning RMTFS memory causes the calling
core to hang if the system is running in EL1.
Disable SHM bridge on sc7180 devices to avoid that hang.
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250721-sc7180-shm-hang-v1-1-99ad9ffeb5b4@trvn.ru
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 767ecf9da7 ]
On a few zcu106 boards USB devices (Dell MS116 USB Optical Mouse, Dell USB
Entry Keyboard) are not enumerated on linux boot due to commit
'b8745e7eb488 ("arm64: zynqmp: Fix usb node drive strength and slew
rate")'.
To fix it as a workaround revert to working version and then investigate
at board level why drive strength from 12mA to 4mA and slew from fast to
slow is not working.
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/85a70cb014ec1f07972fccb60b875596eeaa6b5c.1756799774.git.michal.simek@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7f3cfb7943 ]
IO time is considered busy by default for modern Intel processors. The
current check covers recent Family 6 models but excludes the brand new
Families 18 and 19.
According to Arjan van de Ven, the model check was mainly due to a lack
of testing on systems before INTEL_CORE2_MEROM. He suggests considering
all Intel processors as having an efficient idle.
Extend the IO busy classification to all Intel processors starting with
Family 6, including Family 15 (Pentium 4s) and upcoming Families 18/19.
Use an x86 VFM check and move the function to the header file to avoid
using arch-specific #ifdefs in the C file.
Signed-off-by: Sohil Mehta <sohil.mehta@intel.com>
Link: https://patch.msgid.link/20250908230655.2562440-1-sohil.mehta@intel.com
[ rjw: Added empty line after #include ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c33c43f71b ]
On certain Loongson platforms, drivers attempting to request a legacy
ISA IRQ directly via request_irq() (e.g., IRQ 4) may fail. The
virtual IRQ descriptor is not fully initialized and lacks a valid irqchip.
This issue does not affect ACPI-enumerated devices described in DSDT,
as their interrupts are properly mapped via the GSI translation path.
This indicates the LPC irqdomain itself is functional but is not correctly
handling direct VIRQ-to-HWIRQ mappings.
The root cause is the use of irq_domain_create_linear(). This API sets
up a domain for dynamic, on-demand mapping, typically triggered by a GSI
request. It does not pre-populate the mappings for the legacy VIRQ range
(0-15). Consequently, if no ACPI device claims a specific GSI
(e.g., GSI 4), the corresponding VIRQ (e.g., VIRQ 4) is never mapped to
the LPC domain. A direct call to request_irq(4, ...) then fails because
the kernel cannot resolve this VIRQ to a hardware interrupt managed by
the LPC controller.
The PCH-LPC interrupt controller is an i8259-compatible legacy device
that requires a deterministic, static 1-to-1 mapping for IRQs 0-15 to
support legacy drivers.
Fix this by replacing irq_domain_create_linear() with
irq_domain_create_legacy(). This API is specifically designed for such
controllers. It establishes the required static 1-to-1 VIRQ-to-HWIRQ
mapping for the entire legacy range (0-15) immediately upon domain
creation. This ensures that any VIRQ in this range is always resolvable,
making direct calls to request_irq() for legacy IRQs function correctly.
Signed-off-by: Ming Wang <wangming01@loongson.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aae7a2876c ]
Unlike all the other allocations in this driver, the memory for storing
the pin function descriptions allocated with kcalloc() and later resized
with krealloc() is never freed. Use devres like elsewhere to handle
that. While at it - replace krealloc() with more suitable
devm_krealloc_array().
Note: the logic in this module is pretty convoluted and could probably
use some revisiting, we should probably be able to calculate the exact
amount of memory needed in advance or even skip the allocation
altogether and just add each function to the radix tree separately.
Tested-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d9d61f1da3 ]
Many AMD CPUs can support this feature now. We would get a wrong CPU DIE
temperature if don't consider this. In low-temperature environments,
the CPU die temperature can drop below zero. So many platforms would like
to make extended temperature range as their default configuration.
Default temperature range (0C to 255.875C).
Extended temperature range (-49C to +206.875C).
Ref Doc: AMD V3000 PPR (Doc ID #56558).
Signed-off-by: Chuande Chen <chuachen@cisco.com>
Link: https://lore.kernel.org/r/20250814053940.96764-1-chenchuande@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 43c056ac85 ]
This fixes differences for the P8 system that was initially set to
the same thermal values as the P7, also adds in the PSU sensor for
all of the supported systems
Signed-off-by: David Ober <dober@lenovo.com>
Signed-off-by: David Ober <dober6023@gmail.com>
Link: https://lore.kernel.org/r/20250807103228.10465-1-dober6023@gmail.com
[groeck: Update subject]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e5d1e313d7 ]
The device ID of Strix Halo Data Fabric Function 3 has been in the tree
since commit 0e640f0a47 ("x86/amd_nb: Add new PCI IDs for AMD family
0x1a"), but is somehow missing from k10temp_id_table.
Add it so that it works out of the box.
Tested on Beelink GTR9 Pro Mini PC.
Signed-off-by: Rong Zhang <i@rong.moe>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20250823180443.85512-1-i@rong.moe
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fee0904441 ]
The ASUS S15 xElite model report the Li-ion battery with an OOI, hence this
update the detection and return the appropriate type.
Signed-off-by: Christopher Ruehl <chris.ruehl@gtsys.com.hk>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0115d06355 ]
The workload hint may contain some other hints which are not defined.
So mask out unsupported types. Currently only lower 4 bits of workload
type hints are defined.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://patch.msgid.link/20250828201541.931425-1-srinivas.pandruvada@linux.intel.com
[ rjw: Subject cleanup ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2e82368359 ]
The current behavior of the Step-wise thermal governor is to increase
the cooling level one step at a time after trip point threshold passing
by thermal zone temperature until the temperature stops to rise. Then,
nothing is done until the temperature decreases below the (possibly
updated) trip point threshold, at which point the cooling level is
reduced straight to the applicable minimum.
While this generally works, it is not in agreement with the throttling
logic description comment in step_wise_manage() any more after some
relatively recent changes, and in the case of passive cooling, it may
lead to undesirable performance oscillations between high and low
levels.
For this reason, modify the governor's cooling device state selection
function, get_target_state(), to reduce cooling by one level even if
the temperature is still above the thermal zone threshold, but the
temperature has started to fall down. However, ensure that the cooling
level will remain above the applicable minimum in that case to pull
the zone temperature further down, possibly until it falls below the
trip threshold (which may now be equal to the low temperature of the
trip).
Doing so should help higher performance to be restored earlier in some
cases which is desirable especially for passive trip points with
relatively high hysteresis values.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://patch.msgid.link/1947735.tdWV9SEqCh@rafael.j.wysocki
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4405a214df ]
Some x86/ACPI laptops with MIPI cameras have a INTC10DE or INTC10E0 ACPI
device in the _DEP dependency list of the ACPI devices for the camera-
sensors (which have flags.honor_deps set).
These devices are for an Intel Vision CVS chip for which an out of tree
driver is available [1].
The camera sensor works fine without a driver being loaded for this
ACPI device on the 2 laptops this was tested on:
ThinkPad X1 Carbon Gen 12 (Meteor Lake)
ThinkPad X1 2-in-1 Gen 10 (Arrow Lake)
For now add these HIDs to acpi_ignore_dep_ids[] so that
acpi_dev_ready_for_enumeration() will return true once the other _DEP
dependencies are met and an i2c_client for the camera sensor will get
instantiated.
Link: https://github.com/intel/vision-drivers/ [1]
Signed-off-by: Hans de Goede <hansg@kernel.org>
Link: https://patch.msgid.link/20250829142748.21089-1-hansg@kernel.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3a351de0d9 ]
Just like the other Vivobooks here, the N6506CU has its keyboard IRQ
described as ActiveLow in the DSDT, which the kernel overrides to
EdgeHigh, causing the internal keyboard not to work.
Add the N6506CU to the irq1_level_low_skip_override[] quirk table to fix
this.
Signed-off-by: Sam van Kampen <sam@tehsvk.net>
Link: https://patch.msgid.link/20250829145221.2294784-2-sam@tehsvk.net
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 311942ce76 ]
If handler_address or mapped VA is NULL, the related buffer address and
VA can be ignored, so make acpi_parse_prmt() skip the current handler
in those cases.
Signed-off-by: Shang song (Lenovo) <shangsong2@foxmail.com>
Link: https://patch.msgid.link/20250826030229.834901-1-shangsong2@foxmail.com
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2ef3886ce6 ]
The PCI Local Bus Specification 3.0 (section 6.8.1.6) allows modifying the
low-order bits of the MSI Message DATA register to encode nr_irqs interrupt
numbers in the log2(nr_irqs) bits for the domain.
The problem arises if the base vector (GICV2m base spi) is not aligned with
nr_irqs; in this case, the low-order log2(nr_irqs) bits from the base
vector conflict with the nr_irqs masking, causing the wrong MSI interrupt
to be identified.
To fix this, use bitmap_find_next_zero_area_off() instead of
bitmap_find_free_region() to align the initial base vector with nr_irqs.
Signed-off-by: Christian Bruel <christian.bruel@foss.st.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/all/20250902091045.220847-1-christian.bruel@foss.st.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2a912258c9 ]
Currently, even if some subtests fails, the end result will still yield
"ok 1 selftests: bpf: test_xsk.sh". Fix it by exiting with 1 if there are
any failures.
Signed-off-by: Ricardo B. Marlière <rbm@suse.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20250828-selftests-bpf-test_xsk_ret-v1-1-e6656c01f397@suse.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a3fecb9160 ]
While tracking down a problem where constant expressions used by
BUILD_BUG_ON() suddenly stopped working[1], we found that an added static
initializer was convincing the compiler that it couldn't track the state
of the prior statically initialized value. Tracing this down found that
ffs() was used in the initializer macro, but since it wasn't marked with
__attribute__const__, the compiler had to assume the function might
change variable states as a side-effect (which is not true for ffs(),
which provides deterministic math results).
For arc architecture with CONFIG_ISA_ARCV2=y, the __fls() function
uses __builtin_arc_fls() which lacks GCC's const attribute, preventing
compile-time constant folding, and KUnit testing of ffs/fls fails on
arc[3]. A patch[2] to GCC to solve this has been sent.
Add a fix for this by handling compile-time constants with the standard
__builtin_clzl() builtin (which has const attribute) while preserving
the optimized arc-specific builtin for runtime cases. This has the added
benefit of skipping runtime calculation of compile-time constant values.
Even with the GCC bug fixed (which is about "attribute const") this is a
good change to avoid needless runtime costs, and should be done
regardless of the state of GCC's bug.
Build tested ARCH=arc allyesconfig with GCC arc-linux 15.2.0.
Link: https://github.com/KSPP/linux/issues/364 [1]
Link: https://gcc.gnu.org/pipermail/gcc-patches/2025-August/693273.html
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202508031025.doWxtzzc-lkp@intel.com/ [3]
Signed-off-by: Kees Cook <kees@kernel.org>
Acked-by: Vineet Gupta <vgupta@kernel.org>
Signed-off-by: Yury Norov (NVIDIA) <yury.norov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 592532a77b ]
longhaul_exit() was calling cpufreq_cpu_get(0) without checking
for a NULL policy pointer. On some systems, this could lead to a
NULL dereference and a kernel warning or panic.
This patch adds a check using unlikely() and returns early if the
policy is NULL.
Bugzilla: #219962
Signed-off-by: Dennis Beier <nanovim@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 758acb9ccf ]
On x86-64, USDT arguments can be specified using Scale-Index-Base (SIB)
addressing, e.g. "1@-96(%rbp,%rax,8)". The current USDT implementation
in libbpf cannot parse this format, causing `bpf_program__attach_usdt()`
to fail with -ENOENT (unrecognized register).
This patch fixes this by implementing the necessary changes:
- add correct handling for SIB-addressed arguments in `bpf_usdt_arg`.
- add adaptive support to `__bpf_usdt_arg_type` and
`__bpf_usdt_arg_spec` to represent SIB addressing parameters.
Signed-off-by: Jiawei Zhao <phoenix500526@163.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250827053128.1301287-2-phoenix500526@163.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f144bc21be ]
Lenovo 82K8 has a broken brightness control provided by nvidia_wmi_ec.
Add a quirk to prevent using it.
Reported-by: Wilson Alvarez <wilson.e.alvarez@rubonnek.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4512
Tested-by: Wilson Alvarez <wilson.e.alvarez@rubonnek.com>
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Link: https://patch.msgid.link/20250820170927.895573-1-superm1@kernel.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 149139ddcb ]
Since str_obj is allocated by ACPICA in acpi_evaluate_object_typed(),
it should be free with ACPI_FREE() rather than with kfree(), so use
the former instead of the latter for freeing it.
Signed-off-by: Kaushlendra Kumar <kaushlendra.kumar@intel.com>
Link: https://patch.msgid.link/20250822061946.472594-1-kaushlendra.kumar@intel.com
[ rjw: Subject and changelog rewrite ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit adecf78df9 ]
plic_set_affinity() always calls plic_irq_enable(), which clears up the
priority setting even the interrupt is only masked. This unmasks the
interrupt unexpectly.
Replace the plic_irq_enable/disable() with plic_irq_toggle() to avoid
changing the priority setting.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Nam Cao <namcao@linutronix.de> # VisionFive 2
Tested-by: Chen Wang <unicorn_wang@outlook.com> # Pioneerbox
Reviewed-by: Nam Cao <namcao@linutronix.de>
Reviewed-by: Chen Wang <unicorn_wang@outlook.com>
Link: https://lore.kernel.org/all/20250811002633.55275-1-inochiama@gmail.com
Link: https://lore.kernel.org/lkml/20250722224513.22125-1-inochiama@gmail.com/
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 696968262a ]
The value of OHCI1394_SelfIDCount register includes an error-indicating
bit. It is safer to place the tracepoint probe after validating the
register value.
Link: https://lore.kernel.org/r/20250823030954.268412-2-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f41345f47f ]
In the following toy program (reg states minimized for readability), R0
and R1 always have different values at instruction 6. This is obvious
when reading the program but cannot be guessed from ranges alone as
they overlap (R0 in [0; 0xc0000000], R1 in [1024; 0xc0000400]).
0: call bpf_get_prandom_u32#7 ; R0_w=scalar()
1: w0 = w0 ; R0_w=scalar(var_off=(0x0; 0xffffffff))
2: r0 >>= 30 ; R0_w=scalar(var_off=(0x0; 0x3))
3: r0 <<= 30 ; R0_w=scalar(var_off=(0x0; 0xc0000000))
4: r1 = r0 ; R1_w=scalar(var_off=(0x0; 0xc0000000))
5: r1 += 1024 ; R1_w=scalar(var_off=(0x400; 0xc0000000))
6: if r1 != r0 goto pc+1
Looking at tnums however, we can deduce that R1 is always different from
R0 because their tnums don't agree on known bits. This patch uses this
logic to improve is_scalar_branch_taken in case of BPF_JEQ and BPF_JNE.
This change has a tiny impact on complexity, which was measured with
the Cilium complexity CI test. That test covers 72 programs with
various build and load time configurations for a total of 970 test
cases. For 80% of test cases, the patch has no impact. On the other
test cases, the patch decreases complexity by only 0.08% on average. In
the best case, the verifier needs to walk 3% less instructions and, in
the worst case, 1.5% more. Overall, the patch has a small positive
impact, especially for our largest programs.
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/be3ee70b6e489c49881cb1646114b1d861b5c334.1755694147.git.paul.chaignon@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b5af45302e ]
Add support for TI K3 AM62D2 SoC to read speed and revision values
from hardware and pass to OPP layer. AM62D shares the same configuations
as AM62A so use existing am62a7_soc_data.
Signed-off-by: Paresh Bhagat <p-bhagat@ti.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b65e630a55 ]
Add timeout handling to wait_for_completion calls in memstick_set_rw_addr()
and memstick_alloc_card() to prevent indefinite blocking in case of
hardware or communication failures.
Signed-off-by: Jiayi Li <lijiayi@kylinos.cn>
Link: https://lore.kernel.org/r/20250804024825.1565078-1-lijiayi@kylinos.cn
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9c174e4dac ]
Wrong actual clock reported, if the SD clock division ratio is other
than 1:1(bits DIV[7:0] in SD_CLK_CTRL are set to 11111111).
On high speed mode, cat /sys/kernel/debug/mmc1/ios
Without the patch:
clock: 50000000 Hz
actual clock: 200000000 Hz
After the fix:
clock: 50000000 Hz
actual clock: 50000000 Hz
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20250629203859.170850-1-biju.das.jz@bp.renesas.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 236152dd9b ]
In the pin_config_set function, when handling PIN_CONFIG_BIAS_PULL_DOWN or
PIN_CONFIG_BIAS_PULL_UP, the function calls pcs_pinconf_clear_bias()
which writes the register. However, the subsequent operations continue
using the stale 'data' value from before the register write, effectively
causing the bias clear operation to be overwritten and not take effect.
Fix this by reading the 'data' value from the register after calling
pcs_pinconf_clear_bias().
This bug seems to have existed when this code was first merged in commit
9dddb4df90 ("pinctrl: single: support generic pinconf").
Signed-off-by: Chi Zhang <chizhang@asrmicro.com>
Link: https://lore.kernel.org/20250807062038.13610-1-chizhang@asrmicro.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2caa6b88e0 ]
In the past %pK was preferable to %p as it would not leak raw pointer
values into the kernel log.
Since commit ad67b74d24 ("printk: hash addresses printed with %p")
the regular %p has been improved to avoid this issue.
Furthermore, restricted pointers ("%pK") were never meant to be used
through printk(). They can still unintentionally leak raw pointers or
acquire sleeping locks in atomic contexts.
Switch to the regular pointer formatting which is safer and
easier to reason about.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250811-restricted-pointers-bpf-v1-1-a1d7cc3cb9e7@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a5039648f8 ]
In the past %pK was preferable to %p as it would not leak raw pointer
values into the kernel log.
Since commit ad67b74d24 ("printk: hash addresses printed with %p")
the regular %p has been improved to avoid this issue.
Furthermore, restricted pointers ("%pK") were never meant to be used
through printk(). They can still unintentionally leak raw pointers or
acquire sleeping locks in atomic contexts.
Switch to the regular pointer formatting which is safer and
easier to reason about.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Link: https://lore.kernel.org/r/20250811-restricted-pointers-soc-v2-1-7af7ed993546@linutronix.de
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b832b19318 ]
In the past %pK was preferable to %p as it would not leak raw pointer
values into the kernel log.
Since commit ad67b74d24 ("printk: hash addresses printed with %p")
the regular %p has been improved to avoid this issue.
Furthermore, restricted pointers ("%pK") were never meant to be used
through printk(). They can still unintentionally leak raw pointers or
acquire sleeping locks in atomic contexts.
Switch to the regular pointer formatting which is safer and
easier to reason about.
There are still a few users of %pK left, but these use it through seq_file,
for which its usage is safe.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Link: https://patch.msgid.link/20250811-restricted-pointers-spi-v1-1-32c47f954e4d@linutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 19e7aa0e9e ]
Add a missing le32_to_cpu when accessing num_entries, which is always a
little endian integer.
Fixes booting on Xiaomi Mi 9T (xiaomi-davinci) in big endian.
Signed-off-by: Jens Reidel <adrian@mainlining.org>
Link: https://lore.kernel.org/r/20250726235646.254730-1-adrian@mainlining.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 121fcf3c87 ]
When qcom_scm_assign_mem() fails, the error value is currently being
overwritten after it is logged, resulting in the loss of the original
error code. Fix this by retaining and returning the original error value
as intended.
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250807124451.2623019-1-mukesh.ojha@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c30dcfd4b5 ]
Extend the ASPEED SoC info driver to support AST27XX silicon IDs.
Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com>
Link: https://patch.msgid.link/20250807005208.3517283-1-ryan_chen@aspeedtech.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 64e2f60f35 ]
As reported by Luiz Capitulino enabling HVO on s390 leads to reproducible
crashes. The problem is that kernel page tables are modified without
flushing corresponding TLB entries.
Even if it looks like the empty flush_tlb_all() implementation on s390 is
the problem, it is actually a different problem: on s390 it is not allowed
to replace an active/valid page table entry with another valid page table
entry without the detour over an invalid entry. A direct replacement may
lead to random crashes and/or data corruption.
In order to invalidate an entry special instructions have to be used
(e.g. ipte or idte). Alternatively there are also special instructions
available which allow to replace a valid entry with a different valid
entry (e.g. crdte or cspg).
Given that the HVO code currently does not provide the hooks to allow for
an implementation which is compliant with the s390 architecture
requirements, disable ARCH_WANT_OPTIMIZE_HUGETLB_VMEMMAP again, which is
basically a revert of the original patch which enabled it.
Reported-by: Luiz Capitulino <luizcap@redhat.com>
Closes: https://lore.kernel.org/all/20251028153930.37107-1-luizcap@redhat.com/
Fixes: 00a34d5a99 ("s390: select ARCH_WANT_HUGETLB_PAGE_OPTIMIZE_VMEMMAP")
Cc: stable@vger.kernel.org
Tested-by: Luiz Capitulino <luizcap@redhat.com>
Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
[ Adjust context ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
