Kbuild descends into drivers/soc/tegra/ only when CONFIG_ARCH_TEGRA
is enabled. (see drivers/soc/Makefile)
$(CONFIG_ARCH_TEGRA) in drivers/soc/tegra/Makefile always evaluates
to 'y'.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
pclk_pd_pmu needs to keep running and with the upcoming gpio clock
handling this is not always the case anymore. So add it to the list
of critical clocks for now.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Lin Huang <hl@rock-chips.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Recent versions of the Tegra MC hardware extend the size of the client
ID bitfield in the MC_ERR_STATUS register by one bit. While one could
simply extend the bitfield for older hardware, that would allow data
from reserved bits into the driver code, which is generally a bad idea
on principle. So this patch instead passes in the client ID mask from
from the per-SoC MC data.
There's no MC support for T210 (yet), but when that support winds up
in the kernel, the appropriate soc->client_id_mask value for that chip
will be 0xff.
Based on an original patch by David Ung <davidu@nvidia.com>.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Paul Walmsley <pwalmsley@nvidia.com>
Cc: Thierry Reding <treding@nvidia.com>
Cc: David Ung <davidu@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
This code is used both when creating a new page directory entry and when
tearing it down, with only the PDE value changing between both cases.
Factor the code out so that it can be reused.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
[treding@nvidia.com: make commit message more accurate]
Signed-off-by: Thierry Reding <treding@nvidia.com>
Extract the use count reference accounting into a separate function and
separate it from allocating the PTE.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
[treding@nvidia.com: extract and write commit message]
Signed-off-by: Thierry Reding <treding@nvidia.com>
Rather than explicitly zeroing pages allocated via alloc_page(), add
__GFP_ZERO to the gfp mask to ask the allocator for zeroed pages.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Remove the unnecessary manipulation of the PageReserved flags in the
Tegra SMMU driver. None of this is required as the page(s) remain
private to the SMMU driver.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Use the DMA API instead of calling architecture internal functions in
the Tegra SMMU driver.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Pass smmu_flush_ptc() the device address rather than struct page
pointer.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Thierry Reding <treding@nvidia.com>
smmu_flush_ptc() is used in two modes: one is to flush an individual
entry, the other is to flush all entries. We know at the call site
which we require. Split the function into smmu_flush_ptc_all() and
smmu_flush_ptc().
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Drivers should not be using __cpuc_* functions nor outer_cache_flush()
directly. This change partly cleans up tegra-smmu.c.
The only difference between cache handling of the tegra variants is
Denver, which omits the call to outer_cache_flush(). This is due to
Denver being an ARM64 CPU, and the ARM64 architecture does not provide
this function. (This, in itself, is a good reason why these should not
be used.)
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
[treding@nvidia.com: fix build failure on 64-bit ARM]
Signed-off-by: Thierry Reding <treding@nvidia.com>
Use kcalloc() to allocate the use-counter array for the page directory
entries/page tables. Using kcalloc() allows us to be provided with
zero-initialised memory from the allocators, rather than initialising
it ourselves.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Store the struct page pointer for the second level page tables, rather
than working back from the page directory entry. This is necessary as
we want to eliminate the use of physical addresses used with
arch-private functions, switching instead to use the streaming DMA API.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Fix the page table lookup in the unmap and iova_to_phys methods.
Neither of these methods should allocate a page table; a missing page
table should be treated the same as no mapping present.
More importantly, using as_get_pte() for an IOVA corresponding with a
non-present page table entry increments the use-count for the page
table, on the assumption that the caller of as_get_pte() is going to
setup a mapping. This is an incorrect assumption.
Fix both of these bugs by providing a separate helper which only looks
up the page table, but never allocates it. This is akin to pte_offset()
for CPU page tables.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add a pair of helpers to get the page directory and page table indexes.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Factor out the common PTE setting code into a separate function.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The Tegra SMMU unmap path has several problems:
1. as_pte_put() can perform a write-after-free
2. tegra_smmu_unmap() can perform cache maintanence on a page we have
just freed.
3. when a page table is unmapped, there is no CPU cache maintanence of
the write clearing the page directory entry, nor is there any
maintanence of the IOMMU to ensure that it sees the page table has
gone.
Fix this by getting rid of as_pte_put(), and instead coding the PTE
unmap separately from the PDE unmap, placing the PDE unmap after the
PTE unmap has been completed.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Thierry Reding <treding@nvidia.com>
iova_to_phys() has several problems:
(a) iova_to_phys() is supposed to return 0 if there is no entry present
for the iova.
(b) if as_get_pte() fails, we oops the kernel by dereferencing a NULL
pointer. Really, we should not even be trying to allocate a page
table at all, but should only be returning the presence of the 2nd
level page table. This will be fixed in a subsequent patch.
Treat both of these conditions as "no mapping" conditions.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Marcus Cooper <codekipper@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Fix the section mismatch warning
WARNING: vmlinux.o(.text+0x2b2788): Section mismatch in reference from the function mxc_gpio_probe() to the function .init.text:mxc_gpio_init_gc()
The function mxc_gpio_probe() references
the function __init mxc_gpio_init_gc().
This is often because mxc_gpio_probe lacks a __init
annotation or the annotation of mxc_gpio_init_gc is wrong.
Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com>
Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
writel() already does a cpu_to_le32 conversion, so
remove cpu_to_le32().
Signed-off-by: Leilk Liu <leilk.liu@mediatek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Switch using list_head for cache_head in cache_detail,
it is useful of remove an cache_head entry directly from cache_detail.
v8, using hash list, not head list
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Reviewed-by: NeilBrown <neilb@suse.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Nfsd has implement a site of seq_operations functions as sunrpc's cache.
Just exports sunrpc's codes, and remove nfsd's redundant codes.
v8, same as v6
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Reviewed-by: NeilBrown <neilb@suse.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Cleanup.
Just store cache_detail in seq_file's private,
an allocated handle is redundant.
v8, same as v6.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Reviewed-by: NeilBrown <neilb@suse.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
According to Christoph's advice, this patch introduce a new helper
nfsd4_cb_sequence_done() for processing more callback errors, following
the example of the client's nfs41_sequence_done().
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Currently in the FSL platform all GPIO interrupts in a bank are muxed
into two GPIO lines to the GPC interrupt controller. In each GPIO bank
GPIOs 0-15 are OR'ed into one GPC interrupt controller interrupt and 16-31
are OR'ed into another. With the current code, if any of the 0-15 or
16-31 interrupts are marked as wakeup capable, all interrupts belonging
to that sub-bank (either 0-15 or 16-31) will wake up the device. This is
because interrupts are only being masked at the interrupt controller
and not at the GPIO controller.
This patch allows masking of GPIO interrupts at the GPIO controller during
suspend if they have not been labeled wakeup capable. This patch uses
preexisting IRQCHIP_MASK_ON_SUSPEND flag while initializing the GPIO
interrupts to get the desired behavior.
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: linux-gpio@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Signed-off-by: Ulises Brindis <ubrindis56@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Fix below build warning:
CC drivers/gpio/gpio-omap.o
drivers/gpio/gpio-omap.c: In function 'omap_gpio_irq_type':
drivers/gpio/gpio-omap.c:504:3: warning: passing argument 1 of 'spin_unlock_irqrestore' from incompatible pointer type [enabled by default]
include/linux/spinlock.h:360:29: note: expected 'struct spinlock_t *' but argument is of type 'struct raw_spinlock_t *'
Fixes: commit 4dbada2be4 ("gpio: omap: use raw locks for locking")
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
To set/get atlas7 pull & drive strength, we use lots of if/else
to check pad type. But except mask value or immediate value, all
actions in these conditional branches are the same.
So we use predefined pull info table and drive strength table
to reduce these redundancy code.
Signed-off-by: Wei Chen <Wei.Chen@csr.com>
Signed-off-by: Barry Song <Baohua.Song@csr.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
alloc_orinocodev() would allocate the wiphy entry, but it would only get
registered much later in orinoco_init(). If something failed in the init
process inbetween the call to alloc_orinocodev() and the completion
of orinoco_init(), the drivers would end up calling wiphy_unregister()
with a NULL pointer causing beautiful OOPS fireworks.
Explicitly call wiphy_unregister() instead in the right places.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Our 8887 A2 chip can have separate firmware images for
bluetooth and WLAN. We observed an issue during parallel
downloading of these images by btmrvl and mwifiex drivers.
This patch claims sdio bus before starting of the firmware
download in mwifiex and releases it after completion to
fix the problem.
Signed-off-by: Aniket Nagarnaik <aniketn@marvell.com>
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
We will check if any hidden SSID found in passive scan channels
and do specific SSID active scan for those channels.
Signed-off-by: chunfan chen <jeffc@marvell.com>
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
This patch adds firmware dump feature for SD8997 chipset.
The difference here is only one memory type is needed
to save all firmware information. Device dump information
will be uploaded to usersapace file.
Signed-off-by: Zhaoyang Liu <liuzy@marvell.com>
Signed-off-by: Cathy Luo <cluo@marvell.com>
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
This patch adds support for 8997 chipset to mwifiex
with SDIO/PCIe/USB interface.
The corresponding firmware image files are located in:
"mrvl/sd8997_uapsta.bin"
"mrvl/pcie8997_uapsta.bin"
"mrvl/usb8997_uapsta.bin"
Signed-off-by: Zhaoyang Liu <liuzy@marvell.com>
Signed-off-by: Cathy Luo <cluo@marvell.com>
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
The likelihood of getting a large number of panel drivers from different
vendors is quite high. Add a prefix to the two existing Samsung panel
drivers to set a guideline for future patch submissions. Using vendor
prefixes consistently should allow a cleaner organization of the tree.
Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The current code returns success if kmalloc fails.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
In this driver, two variables are masked by one quantity, and then tested
against a second number with more bits that the mask. Accordingly, the
test always fails. To minimize the possibility of such typos, a symbolic
definition of the mask is created and used.
The separate load and mask operations are also combined into a single
statement.
Reported-by: David Binderman <dcb314@hotmail.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: David Binderman <dcb314@hotmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
This driver is converted to use the common firmware header struct.
Because the old header definition failed to indicate that the multi-byte
entries should be little endian, several problems were thus exposed.
These are fixed.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
This driver is converted to use the common firmware header struct.
Because the old header definition failed to indicate that the multi-byte
entries should be little endian, several problems were thus exposed.
These are fixed.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
This driver is converted to use the common firmware header struct.
Because the old header definition failed to indicate that the multi-byte
entries should be little endian, several problems were thus exposed.
These are fixed.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
This driver is converted to use the common firmware header struct.
Because the old header definition failed to indicate that the multi-byte
entries should be little endian, several problems were thus exposed.
These are fixed.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
The drivers are converted to use the common firmware header struct.
Because the old header definition failed to indicate that the multi-byte
entries should be little endian, several problems were thus exposed.
These are fixed.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Commit e996db6983 (rtlwifi: rtl8192c: Add init codes for "fw_version"
and "fw_subversion") added initialization for fw_version, but failed to
note that the variable in the firmware header is little-endian. The
following Sparse warning results:
CHECK drivers/net/wireless/rtlwifi/rtl8192c/fw_common.c
drivers/net/wireless/rtlwifi/rtl8192c/fw_common.c:242:36: warning: incorrect type in assignment (different base types)
drivers/net/wireless/rtlwifi/rtl8192c/fw_common.c:242:36: expected unsigned short [unsigned] [usertype] fw_version
drivers/net/wireless/rtlwifi/rtl8192c/fw_common.c:242:36: got restricted __le16 [usertype] version
When fixing this problem, I noticed that several of the drivers contain
nearly identical copies of the firmware header struct, and that only the one
used in rtl8192c{e,u} had correct endian notation. The struct has been
moved into a common header, and the other drivers will be fixed in
subsequant patches.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJVzE9HAAoJEBvUPslcq6VzxL0QAJhsU69uKUabtYl+DOHfCwER
7Fnjo5PDAOr184vnWiuQ8xXDjvK8YiyYlYwNkGgrFNAEtHO4akUVmbczfd4Rilqa
du7tqa4CZDA8jDe1jLjvij3i2GZVYVLzImgBmsvkllQKr3zflSpBTNYm6Wp3nOuV
/kkuUcN0MzD9G+a3ZIupIYKCXObH8qhgdcWm9O8qMse7yZnLCgn22GZGCl/3hyAf
tFJRbgFiT5oCU34g9xcjpvKaF03erl/1ti0TUUaHYM+UyJTGtSd/M+0qT7dU/iWw
YP2MiC9FGl+lcft8y66TKf2chT+aF938DLmtGxyB0OVLgX9ZHrGRPlG1CBs2BsKb
N2QerIR6J+2+qZhciJhEcfI6RkYVsLLOWf7YK3FbO8OYCO4LZh1ndGRn//zb2cCh
AGA/zrQlaeop8OMftg1NrNMLpmC0P9hhgiLuBTtLB8Na+sYrAWQUPf7GzB29Tq4L
LR80UA9XNNKyG2oBqkWTytHOjTWIYK/6yoHnmwbui/ER7B4rY1fHAa/2iCjg1oeY
yXEEH1j0y8z1mg4DlqK3V3BElq/ixRKY8ogCIQaM8yKazmmZV2536CUBO6V6LmVg
gOiqKNAjCtYU3wTw6h7UKIOELZMpM9HjCqarbKFHveTPn3ryR8T96NUX7Pg3rOqk
ucRUpeoo0vyHytP9jVjl
=nSeK
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.2/fixes-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes
Fix a NULL pointer exception for omap GPMC bus code if probe fails.
* tag 'omap-for-v4.2/fixes-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
memory: omap-gpmc: Don't try to save uninitialized GPMC context
Signed-off-by: Olof Johansson <olof@lixom.net>
Return type of wait_for_completion_timeout is unsigned long not int.
As time_left is exclusively used for wait_for_completion_timeout here its
type is simply changed to unsigned long.
API conformance testing for completions with coccinelle spatches are being
used to locate API usage inconsistencies:
./drivers/net/wireless/ath/ath9k/link.c:197
int return assigned to unsigned long
Patch was compile tested with x86_64_defconfig + CONFIG_ATH_CARDS=m,
Patch is against 4.1-rc3 (localversion-next is -next-20150514)
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
