Prior to commit 573185cc7e ("mmc: core: Invoke sdio func driver's PM
callbacks from the sdio bus"), the MMC core used to call into the power
management functions of SDIO clients itself and removed the card if the
return code was non-zero. IOW, the mmc handled errors gracefully and didn't
upchain them to the pm core.
Since this change, the mmc core relies on generic power management
functions which treat all errors as a reason to cancel the suspend
immediately. This causes suspend attempts to fail when the libertas
driver is loaded.
To fix this, power down the card explicitly in if_sdio_suspend() when we
know we're about to lose power and return success. Also set a flag in these
cases, and power up the card again in if_sdio_resume().
Fixes: 573185cc7e ("mmc: core: Invoke sdio func driver's PM callbacks from the sdio bus")
Cc: <stable@vger.kernel.org>
Signed-off-by: Daniel Mack <daniel@zonque.org>
Reviewed-by: Chris Ball <chris@printf.net>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
That struct is used when querying firmware for the STA. It seem is has
been changing during the time. Luckily its format seems to be backward
compatible starting with v2 (the only breakage was v1 -> v2).
The version that was supported by brcmfmac so far was v4. It was what
43602a1 and 4366b1 firmwares (7.35.177.56 and 10.10.69.3309 accordingly)
were using. It also seems to be used by early 4366c0 firmwares
(10.10.69.6908 and 10.10.69.69017).
The problem appears when switching to the 10.10.122.20 firmware. It uses
v5 and instead of falling back to v4 when submitted buffer isn't big
enough it fallbacks to the v3.
To receive all v4 specific info with the newest firmware we have to
submit a struct (buffer) that matches v5.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
That struct is passed by a firmware when querying for STA info. Flags
are used to indicate what info could be obtained.
These new defines may allow passing more info to the cfg80211 in the
future. They had been obtained from Broadcom's SDK file wlioctl_defs.h
used by DD-WRT.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
New Broadcom firmwares mark monitor mode packets using a newly defined
bit in the flags field. Use it to filter them out and pass to the
monitor interface. These defines were found in bcmmsgbuf.h from SDK.
As not every firmware generates radiotap header this commit introduces
BRCMF_FEAT_MONITOR_FMT_RADIOTAP flag. It has to be has based on firmware
capabilities. If not present brcmf_netif_mon_rx() will assume packet is
a raw 802.11 frame and will prepend it with an empty radiotap header.
This new code is limited to the msgbuf protocol at this point. Adding
support for SDIO/USB devices will require some extra work (possibly a
new firmware release).
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Depending on used build-time options some firmwares may already include
radiotap header in passed monitor frames. Add a new feature flag to
store info about it. It's needed for proper handling of received frames
before passing them up.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Many/most of firmwares support creating monitor interface but only the
most recent ones explicitly /announce/ it using a "monitor" entry in the
list of capabilities.
Check for that entry and store internally info about monitor mode
support using a new feature flag. Once we sort out all details of
handling monitor interface it will be used when reporting available
interfaces to the cfg80211.
Later some fallback detecion method may be added for older firmwares.
For now just stick to the "monitor" capability which should be 100%
reliable.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Enabling HARDENED_USERCOPY may cause measurable regressions in networking
performance: up to 8% under UDP flood.
I ran a small packet UDP flood using pktgen vs. a host b2b connected. On
the receiver side the UDP packets are processed by a simple user space
process that just reads and drops them:
https://github.com/netoptimizer/network-testing/blob/master/src/udp_sink.c
Not very useful from a functional PoV, but it helps to pin-point
bottlenecks in the networking stack.
When running a kernel with CONFIG_HARDENED_USERCOPY=y, I see a 5-8%
regression in the receive tput, compared to the same kernel without this
option enabled.
With CONFIG_HARDENED_USERCOPY=y, perf shows ~6% of CPU time spent
cumulatively in __check_object_size (~4%) and __virt_addr_valid (~2%).
The call-chain is:
__GI___libc_recvfrom
entry_SYSCALL_64_after_hwframe
do_syscall_64
__x64_sys_recvfrom
__sys_recvfrom
inet_recvmsg
udp_recvmsg
__check_object_size
udp_recvmsg() actually calls copy_to_iter() (inlined) and the latters
calls check_copy_size() (again, inlined).
A generic distro may want to enable HARDENED_USERCOPY in their default
kernel config, but at the same time, such distro may want to be able to
avoid the performance penalties in with the default configuration and
disable the stricter check on a per-boot basis.
This change adds a boot parameter that conditionally disables
HARDENED_USERCOPY via "hardened_usercopy=off".
Signed-off-by: Chris von Recklinghausen <crecklin@redhat.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
num_channels for slim dais are aready set int set_channel_map,
do not overwrite them in hw_params.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch add routings mixer controls for slim rx ports.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds support to SLIMbus TX dais in AFE module.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Existing code already has support for SLIMbus TX and RX, only thing
that was missing from TX side was mapping between virtual to actual
DSP port ids.
This patch adds those mappings.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
The XRUN trigger from the driver should be done via
snd_pcm_stop_xrun(). It simplifies the locking as well.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
The XRUN trigger from the driver should be done via
snd_pcm_stop_xrun(). It fixes the missing stream locking as a gratis,
too.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
The XRUN trigger from the driver should be done via
snd_pcm_stop_xrun(). It fixes the missing stream locking as a gratis,
too.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Replace open-codes with the standard snd_pcm_stop_xrun() helper.
It simplifies codes a lot.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add suffix ULL to constant 256 in order to give the compiler complete
information about the proper arithmetic to use.
Notice that such constant is used in a context that expects an
expression of type u64 (64 bits, unsigned) and the following
expression is currently being evaluated using 32-bit arithmetic:
256 * fs * 2 * mclk_src_scaling[i].param
Addresses-Coverity-ID: 1339616 ("Unintentional integer overflow")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
asm ports are open as part of prepare, so for use cases like
"aplay sample.wav" were sample.wav is not present. This would
call port close eventhough port was never opened. DSP would
return errors for such use cases.
Avoid doing this by checking the port state.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
afe ports are open as part of prepare, so for use cases like
"aplay sample.wav" were sample.wav is not present. This would
call port close eventhough port was never opened. DSP would
return errors for such use cases.
Avoid doing this by checking the port state.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Current implementation does not guarantee packed pixel modes working
with every dongle. There are some dongles, which require selecting
the output mode explicitly.
Write proper values to registers in packed_pixel mode, based on how it
is done in vendor's code. Select output color space: RGB
(no packed pixel) or YCBCR422 (packed pixel).
This reverts commit e8b92efa62
("drm/bridge/sii8620: fix display of packed pixel modes in MHL2").
Signed-off-by: Maciej Purski <m.purski@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1530204243-6370-3-git-send-email-m.purski@samsung.com
Currently AVI infoframe is sent only in MHL3. However, some MHL2 dongles
need AVI infoframe to work correctly in either packed pixel mode or
non-packed pixel mode.
Send AVI infoframe in set_infoframes() in every case. Create an
infoframe using drm_hdmi_infoframe_from_display_mode() instead of
manually filling each infoframe structure's field.
Signed-off-by: Maciej Purski <m.purski@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1530204243-6370-2-git-send-email-m.purski@samsung.com
For some types of tuners (Philips FMD1216ME(X) MK3 currently) we know that
letting TDA9887 output port 1 remain high (inactive) will switch FM radio
to mono mode.
Let's make use of this functionality - nothing changes for the default
stereo radio mode.
Tested on a Medion 95700 board which has a FMD1216ME tuner.
Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
There are two versions of the Qivicon Zigbee stick in circulation. This
adds the second USB ID to the cp210x driver.
Signed-off-by: Olli Salonen <olli.salonen@iki.fi>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
The "r" variable is an int and "bufsize" is an unsigned int so the
comparison is type promoted to unsigned. If usb_control_msg() returns a
negative that is treated as a high positive value and the error handling
doesn't work.
Fixes: 2d5a9c72d0 ("USB: serial: ch341: fix control-message error handling")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Variable 'irq' is being assigned but is never used hence it is
and can be removed.
Cleans up clang warning:
warning: variable 'irq' set but not used [-Wunused-but-set-variable]
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Variable old_vlan is being assigned but is never used hence it is
and can be removed.
Cleans up clang warning:
warning: variable 'old_vlan' set but not used [-Wunused-but-set-variable]
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pointer 'name' is being assigned but is never used hence it is
redundant and can be removed.
Cleans up clang warning:
warning: variable 'name' set but not used [-Wunused-but-set-variable]
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pointer 'info' is being assigned but is never used hence it is
redundant and can be removed.
Cleans up clang warning:
warning: variable 'info' set but not used [-Wunused-but-set-variable]
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pointer pfhwdev is being assigned but is never used hence it is
redundant and can be removed.
Cleans up clang warning:
warning: variable 'pfhwdev' set but not used [-Wunused-but-set-variable]
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Variable 'protocol' is being assigned but is never used hence it is
redundant and can be removed.
Cleans up clang warning:
warning: variable 'protocol' set but not used [-Wunused-but-set-variable]
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Variable last_rule_idx is being assigned but is never used hence it is
redundant and can be removed.
Cleans up clang warning:
warning: variable 'last_rule_idx' set but not used [-Wunused-but-set-variable]
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Variable 'inc' is being assigned but is never used hence it is
redundant and can be removed.
Cleans up clang warning:
warning: variable 'inc' set but not used [-Wunused-but-set-variable]
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pointer req and variable func are being assigned but are never used
hence they are redundant and can be removed.
Cleans up clang warnings:
warning: variable 'req' set but not used [-Wunused-but-set-variable]
warning: variable 'func' set but not used [-Wunused-but-set-variable]
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Variable 'freed' is being assigned but is never used hence it is
redundant and can be removed.
Cleans up clang warning:
warning: variable 'freed' set but not used [-Wunused-but-set-variable]
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pointer rxd is being assigned but is never used hence it is
redundant and can be removed.
Cleans up clang warning:
warning: variable 'rxb' set but not used [-Wunused-but-set-variable]
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Variable old_duplex is being assigned but is never used hence it is
redundant and can be removed.
Cleans up clang warning:
warning: variable 'old_duplex' set but not used [-Wunused-but-set-variable]
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pointer rxdesc is being assigned but is never used hence it is
redundant and can be removed.
Cleans up clang warning:
warning: variable 'rxdesc' set but not used [-Wunused-but-set-variable]
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Variable 'off' is being assigned but is never used hence it is
redundant and can be removed.
Cleans up clang warning:
warning: variable 'off' set but not used [-Wunused-but-set-variable]
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit describes a device instance private data of the driver
(struct cx25840_state) in a kernel-doc style comment.
Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Basically the xrun injection routine can simply call the standard
helper snd_pcm_stop_xrun(), but with one exception: it may be called
even when the stream is closed.
Make snd_pcm_stop_xrun() more robust and check the NULL runtime state,
and simplify xrun injection code by calling it.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The PCM xrun injection triggers directly snd_pcm_stop() without the
standard xrun handler, hence it's not recorded on the event buffer.
Ditto for snd_pcm_stop_xrun() call and SNDRV_PCM_IOCTL_XRUN ioctl.
They are inconvenient from the debugging POV.
Let's make them to trigger XRUN via the standard helper more
consistently.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We need to zero-initialize cx25840 platform data structure to make sure
that its future members do not contain random stack garbage.
Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Add a new control V4L2_CID_MPEG_VIDEO_VP9_PROFILE for VP9 profiles. This control
allows selecting the desired profile for VP9 encoder and querying for supported
profiles by VP9 encoder/decoder.
Though this control is similar to V4L2_CID_MPEG_VIDEO_VP8_PROFILE, we need to
separate this control from it because supported profiles usually differ between
VP8 and VP9.
Signed-off-by: Keiichi Watanabe <keiichiw@chromium.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Jesus Sanchez-Palencia says:
====================
Scheduled packet Transmission: ETF
Changes since v1:
- moved struct sock_txtime from socket.h to uapi net_tstamp.h;
- sk_clockid was changed from u16 to u8;
- sk_txtime_flags was changed from u16 to a u8 bit field in struct sock;
- the socket option flags are now validated in sock_setsockopt();
- added SO_EE_ORIGIN_TXTIME;
- sockc.transmit_time is now initialized from all IPv4 Tx paths;
- added support for the IPv6 Tx path;
Overview
========
This work consists of a set of kernel interfaces that can be used by
applications that require (time-based) Scheduled Tx of packets.
It is comprised by 3 new components to the kernel:
- SO_TXTIME: socket option + cmsg programming interfaces.
- etf: the "earliest txtime first" qdisc, that provides per-queue
TxTime-based scheduling. This has been renamed from 'tbs' to
'etf' to better describe its functionality.
- taprio: the "time-aware priority scheduler" qdisc, that provides
per-port Time-Aware scheduling;
This patchset is providing the first 2 components, which have been
developed for longer. The taprio qdisc will be shared as an RFC separately
(shortly).
Note that this series is a follow up of the "Time based packet
transmission" RFCv3 [1].
etf (formerly known as 'tbs')
=============================
For applications/systems that the concept of time slices isn't precise
enough, the etf qdisc allows applications to control the instant when
a packet should leave the network controller. When used in conjunction
with taprio, it can also be used in case the application needs to
control with greater guarantee the offset into each time slice a packet
will be sent. Another use case of etf, is when only a small number of
applications on a system are time sensitive, so it can then be used
with a more traditional root qdisc (like mqprio).
The etf qdisc is designed so it buffers packets until a configurable
time before their deadline (Tx time). The qdisc uses a rbtree internally
so the buffered packets are always 'ordered' by their txtime (deadline)
and will be dequeued following the earliest txtime first.
It relies on the SO_TXTIME API set for receiving the per-packet timestamp
(txtime) as well as the config flags for each socket: the clockid to be
used as a reference, if the expected mode of txtime for that socket is
deadline or strict mode, and if packet drops should be reported on the
socket's error queue or not.
The qdisc will drop any packets with a Tx time in the past, or if a
packet expires while waiting for being dequeued. Drops can be reported
as errors back to userspace through the socket's error queue.
Example configuration:
$ tc qdisc add dev enp2s0 parent 100:1 etf offload delta 200000 \
clockid CLOCK_TAI
Here, the Qdisc will use HW offload for the txtime control.
Packets will be dequeued by the qdisc "delta" (200000) nanoseconds before
their transmission time. Because this will be using HW offload and
since dynamic clocks are not supported by hrtimers, the system clock
and the PHC clock must be synchronized for this mode to behave as expected.
A more complete example can be found here, with instructions of how to
test it:
https://gist.github.com/jeez/bd3afeff081ba64a695008dd8215866f [2]
Note that we haven't modified the qdisc so it uses a timerqueue because
the modification needed was increasing the number of cachelines of a sk_buff.
This series is also hosted on github and can be found at [3].
The companion iproute2 patches can be found at [4].
[1] https://patchwork.ozlabs.org/cover/882342/
[2] github doesn't make it clear, but the gist can be cloned like this:
$ git clone https://gist.github.com/jeez/bd3afeff081ba64a695008dd8215866f scheduled-tx-tests
[3] https://github.com/jeez/linux/tree/etf-v2
[4] https://github.com/jeez/iproute2/tree/etf-v2
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the socket error queue for reporting dropped packets if the
socket has enabled that feature through the SO_TXTIME API.
Packets are dropped either on enqueue() if they aren't accepted by the
qdisc or on dequeue() if the system misses their deadline. Those are
reported as different errors so applications can react accordingly.
Userspace can retrieve the errors through the socket error queue and the
corresponding cmsg interfaces. A struct sock_extended_err* is used for
returning the error data, and the packet's timestamp can be retrieved by
adding both ee_data and ee_info fields as e.g.:
((__u64) serr->ee_data << 32) + serr->ee_info
This feature is disabled by default and must be explicitly enabled by
applications. Enabling it can bring some overhead for the Tx cycles
of the application.
Signed-off-by: Jesus Sanchez-Palencia <jesus.sanchez-palencia@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement HW offload support for SO_TXTIME through igb's Launchtime
feature. This is done by extending igb_setup_tc() so it supports
TC_SETUP_QDISC_ETF and configuring i210 so time based transmit
arbitration is enabled.
The FQTSS transmission mode added before is extended so strict
priority (SP) queues wait for stream reservation (SR) ones.
igb_config_tx_modes() is extended so it can support enabling/disabling
Launchtime following the previous approach used for the credit-based
shaper (CBS).
As the previous flow, FQTSS transmission mode is enabled automatically
by the driver once Launchtime (or CBS, as before) is enabled.
Similarly, it's automatically disabled when the feature is disabled
for the last queue that had it setup on.
The driver just consumes the transmit times from the skbuffs directly,
so no special handling is done in case an 'invalid' time is provided.
We assume this has been handled by the ETF qdisc already.
Signed-off-by: Jesus Sanchez-Palencia <jesus.sanchez-palencia@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, skb_tx_timestamp() is being called before the Tx
descriptors are prepared in igb_xmit_frame_ring(), which happens
during either the igb_tso() or igb_tx_csum() calls.
Given that now the skb->tstamp might be used to carry the timestamp
for SO_TXTIME, we must only call skb_tx_timestamp() after the
information has been copied into the Tx descriptors.
Signed-off-by: Jesus Sanchez-Palencia <jesus.sanchez-palencia@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Split code into a separate function (igb_offload_apply()) that will be
used by ETF offload implementation.
Signed-off-by: Jesus Sanchez-Palencia <jesus.sanchez-palencia@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently the data transmission arbitration algorithm - DataTranARB
field on TQAVCTRL reg - is always set to CBS when the Tx mode is
changed from legacy to 'Qav' mode.
Make that configuration a bit more granular in preparation for the
upcoming Launchtime enabling patches, since CBS and Launchtime can be
enabled separately. That is achieved by moving the DataTranARB setup
to igb_config_tx_modes() instead.
Similarly, when disabling CBS we must check if it has been disabled
for all queues, and clear the DataTranARB accordingly.
Signed-off-by: Jesus Sanchez-Palencia <jesus.sanchez-palencia@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
