[ Upstream commit 2bd5ab9333 ]
MSM8992 uses the same mutex hardware as MSM8994. This was wrong
from the start, but never presented as an issue until the sfpb
compatible was given different driver data.
Fixes: 6a6d1978f9 ("arm64: dts: msm8992 SoC and LG Bullhead (Nexus 5X) support")
Reported-by: Eugene Lepshy <fekz115@gmail.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221219131918.446587-1-konrad.dybcio@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 10e2f328bd ]
dt_binding_check detects an issue with the pgc_hsiomix power
domain:
pgc: 'power-domains@17' does not match any of the regexes
This is because 'power-domains' should be 'power-domain'
Fixes: 2ae42e0c0b ("arm64: dts: imx8mp: add HSIO power-domains")
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b3b75ace20 ]
The GPC node references an interrupt parent, but it doesn't
state the interrupt itself. According to the TRM, this IRQ
is 87. This also eliminate an error detected from dt_binding_check
Fixes: fc0f051246 ("arm64: dts: imx8mp: add GPC node with GPU power domains")
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 87b30c4b0e ]
Calling of_find_compatible_node() returns a node pointer with refcount
incremented. Use of_node_put() on it when done.
The patch fixes the same problem on different i.MX platforms.
Fixes: 8b88f7ef31 ("ARM: mx25: Retrieve IIM base from dt")
Fixes: 94b2bec1b0 ("ARM: imx27: Retrieve the SYSCTRL base address from devicetree")
Fixes: 3172225d45 ("ARM: imx31: Retrieve the IIM base address from devicetree")
Fixes: f68ea682d1 ("ARM: imx35: Retrieve the IIM base address from devicetree")
Fixes: ee18a7154e ("ARM: imx5: retrieve iim base from device tree")
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 62f0147fd4 ]
For clock and strobe pad of usdhc, need to config as pull down.
Current pad config set these pad as both pull up and pull down,
this is wrong, so fix it here.
Find this issue when enable HS400ES mode on one Micron eMMC chip,
CMD8 always meet CRC error in HS400ES/HS400 mode.
Fixes: e37907bd82 ("arm64: dts: freescale: add i.MX93 11x11 EVK basic support")
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6c620a3051 ]
Set optional `simple-audio-card,mclk-fs` parameter to ensure a proper
clock to the nau8822 audio codec. Without this change with an audio
stream rate of 44.1 kHz the playback is faster.
Set the MCLK at the right frequency, codec can properly use it to
generate 44.1 kHz I2S-FS.
Fixes: 6a57f224f7 ("arm64: dts: freescale: add initial support for verdin imx8m mini")
Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5225ba9db1 ]
Early hardware did not support hardware handshaking on the UART, but
final production hardware did. When the hardware was updated the chip
select was changed to facilitate hardware handshaking on UART3. Fix the
ecspi2 pin mux to eliminate a pin conflict with UART3 and allow the
EEPROM to operate again.
Fixes: 4ce01ce36d ("arm64: dts: imx8mm-beacon: Enable RTS-CTS on UART3")
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0d1d030f00 ]
Set optional `simple-audio-card,mclk-fs` parameter to ensure a proper
clock to the wm8904 audio codec. Without this change with an audio
stream rate of 44.1 kHz the playback is completely distorted.
Fixes: 6a57f224f7 ("arm64: dts: freescale: add initial support for verdin imx8m mini")
Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9dfbc72256 ]
The following build warning is seen when running:
make dtbs_check DT_SCHEMA_FILES=fsl-imx-uart.yaml
arch/arm/boot/dts/imx6dl-gw560x.dtb: serial@2020000: rts-gpios: False schema does not allow [[20, 1, 0]]
From schema: Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml
The imx6qdl-gw560x board does not expose the UART RTS and CTS
as native UART pins, so 'uart-has-rtscts' should not be used.
Using 'uart-has-rtscts' with 'rts-gpios' is an invalid combination
detected by serial.yaml.
Fix the problem by removing the incorrect 'uart-has-rtscts' property.
Fixes: b8a559feff ("ARM: dts: imx: add Gateworks Ventana GW5600 support")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f4dd0845c4 ]
'clock_frequency' is not a valid property.
Use the correct 'clock-frequency' instead.
Fixes: 8b646cfb84 ("ARM: dts: imx7d-pico: Add support for the dwarf baseboard")
Fixes: 6418fd9241 ("ARM: dts: imx7d-pico: Add support for the nymph baseboard")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 94e2cf1e0d ]
'clock_frequency' is not a valid property.
Use the correct 'clock-frequency' instead.
Fixes: 47246fafef ("ARM: dts: imx6ul-pico: Add support for the dwarf baseboard")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cfd04dd1c4 ]
'regulator-compatible' is not a valid property according to
nxp,pca9450-regulator.yaml and causes the following warning:
DTC_CHK arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dtb
...
pmic@25: regulators:LDO1: Unevaluated properties are not allowed ('regulator-compatible' was unexpected)
Remove the invalid 'regulator-compatible' property.
Cc: Teresa Remmet <t.remmet@phytec.de>
Fixes: 88f7f6bcca ("arm64: dts: freescale: Add support for phyBOARD-Pollux-i.MX8MP")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ee4e530bdd ]
The vendor kernel is using the GCC_USB4_DP_PHY_PRIM_BCR and
GCC_USB4_1_DP_PHY_PRIM_BCR resets for the USB4-USB3-DP QMP PHYs.
Update the primary USB-DP PHY node to match.
Fixes: 152d1faf1e ("arm64: dts: qcom: add SC8280XP platform")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221121085058.31213-15-johan+linaro@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 55228db269 upstream.
WG14 N2350 specifies that it is an undefined behavior to have type
definitions within offsetof", see
https://www.open-std.org/jtc1/sc22/wg14/www/docs/n2350.htm
This specification is also part of C23.
Therefore, replace the TYPE_ALIGN macro with the _Alignof builtin to
avoid undefined behavior. (_Alignof itself is C11 and the kernel is
built with -gnu11).
ISO C11 _Alignof is subtly different from the GNU C extension
__alignof__. Latter is the preferred alignment and _Alignof the
minimal alignment. For long long on x86 these are 8 and 4
respectively.
The macro TYPE_ALIGN's behavior matches _Alignof rather than
__alignof__.
[ bp: Massage commit message. ]
Signed-off-by: YingChi Long <me@inclyc.cn>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20220925153151.2467884-1-me@inclyc.cn
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 18bba1843f upstream.
Add the missing #include of asm/assembler.h, which is where the ldr_l
macro is defined.
Fixes: ff7a167961 ("arm64: efi: Execute runtime services from a dedicated stack")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Lee Jones <lee@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ff7a167961 upstream.
With the introduction of PRMT in the ACPI subsystem, the EFI rts
workqueue is no longer the only caller of efi_call_virt_pointer() in the
kernel. This means the EFI runtime services lock is no longer sufficient
to manage concurrent calls into firmware, but also that firmware calls
may occur that are not marshalled via the workqueue mechanism, but
originate directly from the caller context.
For added robustness, and to ensure that the runtime services have 8 KiB
of stack space available as per the EFI spec, introduce a spinlock
protected EFI runtime stack of 8 KiB, where the spinlock also ensures
serialization between the EFI rts workqueue (which itself serializes EFI
runtime calls) and other callers of efi_call_virt_pointer().
While at it, use the stack pivot to avoid reloading the shadow call
stack pointer from the ordinary stack, as doing so could produce a
gadget to defeat it.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Lee Jones <lee@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 980a637d11 upstream.
While compile-testing randconfig builds for the upcoming boardfile
removal, I noticed that an earlier patch of mine was completely
broken, and the introduction of CONFIG_ARCH_OMAP1_ANY only replaced
one set of build failures with another one, now resulting in
link failures like
ld: drivers/video/fbdev/omap/omapfb_main.o: in function `omapfb_do_probe':
drivers/video/fbdev/omap/omapfb_main.c:1703: undefined reference to `omap_set_dma_priority'
ld: drivers/dma/ti/omap-dma.o: in function `omap_dma_free_chan_resources':
drivers/dma/ti/omap-dma.c:777: undefined reference to `omap_free_dma'
drivers/dma/ti/omap-dma.c:1685: undefined reference to `omap_get_plat_info'
ld: drivers/usb/gadget/udc/omap_udc.o: in function `next_in_dma':
drivers/usb/gadget/udc/omap_udc.c:820: undefined reference to `omap_get_dma_active_status'
I tried reworking it, but the resulting patch ended up much bigger than
simply avoiding the original problem of unused-function warnings like
arch/arm/mach-omap1/mcbsp.c:76:30: error: unused variable 'omap1_mcbsp_ops' [-Werror,-Wunused-variable]
As a result, revert the previous fix, and rearrange the code that
produces warnings to hide them. For mcbsp, the #ifdef check can
simply be removed as the cpu_is_omapxxx() checks already achieve
the same result, while in the io.c the easiest solution appears to
be to merge the common map bits into each soc specific portion.
This gets cleaned in a nicer way after omap7xx support gets dropped,
as the remaining SoCs all have the exact same I/O map.
Fixes: 615dce5bf7 ("ARM: omap1: fix build with no SoC selected")
Cc: stable@vger.kernel.org
Acked-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8a1ed98fe0 upstream.
After commit cf7f3f4fa9 ("clk: imx8mp: fix usb_root_clk parent"),
usb_root_clk is no longer for suspend clock so update dts accordingly
to use right bus clock and suspend clock.
Fixes: fb8587a2c1 ("arm64: dtsi: imx8mp: add usb nodes")
Cc: stable@vger.kernel.org # ed1f4ccfe9: clk: imx: imx8mp: add shared clk gate for usb suspend clk
Cc: stable@vger.kernel.org # v5.19+
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Li Jun <jun.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 43d5f5d636 upstream.
The 32-bit memory resource is needed for non-prefetchable memory
allocations on the PCIe bus, however with some cards (such as the
SM768) the system fails to allocate memory from this.
Checking the allocation against the datasheet, it looks like there
has been a mis-calcualation of the resource for the first memory
region (0x0060090000..0x0070ffffff) which in the data-sheet for
the fu740 (v1p2) is from 0x0060000000..0x007fffffff. Changing
this to allocate from 0x0060090000..0x007fffffff fixes the probing
issues.
Fixes: ae80d51480 ("riscv: dts: Add PCIe support for the SiFive FU740-C000 SoC")
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Greentime Hu <greentime.hu@sifive.com>
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Cc: stable@vger.kernel.org
Tested-by: Ron Economos <re@w6rz.net> # from IRC
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d52fec86a4 upstream.
HWCAP_LOONGARCH_CPUCFG is missing in elf_hwcap, so add it for glibc's
later use.
Cc: stable@vger.kernel.org
Reported-by: Yinyu Cai <caiyinyu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f52853a668 ]
Meteor Lake RAPL support is the same as previous Sky Lake.
Add Meteor Lake model for RAPL.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230104145831.25498-1-rui.zhang@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c07311b550 ]
Since Tigerlake seems to have inherited its cstates and other RAPL power
caps from Icelake, assume it also follows Icelake for its RAPL events.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Link: https://lore.kernel.org/r/20221228113454.1199118-1-rodrigo.vivi@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 2a81160d29 upstream.
When creating a new monitoring group, the RMID allocated for it may have
been used by a group which was previously removed. In this case, the
hardware counters will have non-zero values which should be deducted
from what is reported in the new group's counts.
resctrl_arch_reset_rmid() initializes the prev_msr value for counters to
0, causing the initial count to be charged to the new group. Resurrect
__rmid_read() and use it to initialize prev_msr correctly.
Unlike before, __rmid_read() checks for error bits in the MSR read so
that callers don't need to.
Fixes: 1d81d15db3 ("x86/resctrl: Move mbm_overflow_count() into resctrl_arch_rmid_read()")
Signed-off-by: Peter Newman <peternewman@google.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20221220164132.443083-1-peternewman@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fe1f071438 upstream.
When the user moves a running task to a new rdtgroup using the task's
file interface or by deleting its rdtgroup, the resulting change in
CLOSID/RMID must be immediately propagated to the PQR_ASSOC MSR on the
task(s) CPUs.
x86 allows reordering loads with prior stores, so if the task starts
running between a task_curr() check that the CPU hoisted before the
stores in the CLOSID/RMID update then it can start running with the old
CLOSID/RMID until it is switched again because __rdtgroup_move_task()
failed to determine that it needs to be interrupted to obtain the new
CLOSID/RMID.
Refer to the diagram below:
CPU 0 CPU 1
----- -----
__rdtgroup_move_task():
curr <- t1->cpu->rq->curr
__schedule():
rq->curr <- t1
resctrl_sched_in():
t1->{closid,rmid} -> {1,1}
t1->{closid,rmid} <- {2,2}
if (curr == t1) // false
IPI(t1->cpu)
A similar race impacts rdt_move_group_tasks(), which updates tasks in a
deleted rdtgroup.
In both cases, use smp_mb() to order the task_struct::{closid,rmid}
stores before the loads in task_curr(). In particular, in the
rdt_move_group_tasks() case, simply execute an smp_mb() on every
iteration with a matching task.
It is possible to use a single smp_mb() in rdt_move_group_tasks(), but
this would require two passes and a means of remembering which
task_structs were updated in the first loop. However, benchmarking
results below showed too little performance impact in the simple
approach to justify implementing the two-pass approach.
Times below were collected using `perf stat` to measure the time to
remove a group containing a 1600-task, parallel workload.
CPU: Intel(R) Xeon(R) Platinum P-8136 CPU @ 2.00GHz (112 threads)
# mkdir /sys/fs/resctrl/test
# echo $$ > /sys/fs/resctrl/test/tasks
# perf bench sched messaging -g 40 -l 100000
task-clock time ranges collected using:
# perf stat rmdir /sys/fs/resctrl/test
Baseline: 1.54 - 1.60 ms
smp_mb() every matching task: 1.57 - 1.67 ms
[ bp: Massage commit message. ]
Fixes: ae28d1aae4 ("x86/resctrl: Use an IPI instead of task_work_add() to update PQR_ASSOC MSR")
Fixes: 0efc89be94 ("x86/intel_rdt: Update task closid immediately on CPU in rmdir and unmount")
Signed-off-by: Peter Newman <peternewman@google.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/20221220161123.432120-1-peternewman@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 90b926e68f upstream.
Since
72cbc8f04f ("x86/PAT: Have pat_enabled() properly reflect state when running on Xen")
PAT can be enabled without MTRR.
This has resulted in problems e.g. for a SEV-SNP guest running under Hyper-V,
when trying to establish a new mapping via memremap() with WB caching mode, as
pat_x_mtrr_type() will call mtrr_type_lookup(), which in turn is returning
MTRR_TYPE_INVALID due to MTRR being disabled in this configuration.
The result is a mapping with UC- caching, leading to severe performance
degradation.
Fix that by handling MTRR_TYPE_INVALID the same way as MTRR_TYPE_WRBACK
in pat_x_mtrr_type() because MTRR_TYPE_INVALID means MTRRs are disabled.
[ bp: Massage commit message. ]
Fixes: 72cbc8f04f ("x86/PAT: Have pat_enabled() properly reflect state when running on Xen")
Reported-by: Michael Kelley (LINUX) <mikelley@microsoft.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/20230110065427.20767-1-jgross@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7c6dd961d0 upstream.
With 'GNU assembler (GNU Binutils for Debian) 2.39.90.20221231' the
build now reports:
arch/x86/realmode/rm/../../boot/bioscall.S: Assembler messages:
arch/x86/realmode/rm/../../boot/bioscall.S:35: Warning: found `movsd'; assuming `movsl' was meant
arch/x86/realmode/rm/../../boot/bioscall.S:70: Warning: found `movsd'; assuming `movsl' was meant
arch/x86/boot/bioscall.S: Assembler messages:
arch/x86/boot/bioscall.S:35: Warning: found `movsd'; assuming `movsl' was meant
arch/x86/boot/bioscall.S:70: Warning: found `movsd'; assuming `movsl' was meant
Which is due to:
PR gas/29525
Note that with the dropped CMPSD and MOVSD Intel Syntax string insn
templates taking operands, mixed IsString/non-IsString template groups
(with memory operands) cannot occur anymore. With that
maybe_adjust_templates() becomes unnecessary (and is hence being
removed).
More details: https://sourceware.org/bugzilla/show_bug.cgi?id=29525
Borislav Petkov further explains:
" the particular problem here is is that the 'd' suffix is
"conflicting" in the sense that you can have SSE mnemonics like movsD %xmm...
and the same thing also for string ops (which is the case here) so apparently
the agreement in binutils land is to use the always accepted suffixes 'l' or 'q'
and phase out 'd' slowly... "
Fixes: 7a734e7dd9 ("x86, setup: "glove box" BIOS calls -- infrastructure")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/Y71I3Ex2pvIxMpsP@hirez.programming.kicks-ass.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 76d588dddc upstream.
Current imc-pmu code triggers a WARNING with CONFIG_DEBUG_ATOMIC_SLEEP
and CONFIG_PROVE_LOCKING enabled, while running a thread_imc event.
Command to trigger the warning:
# perf stat -e thread_imc/CPM_CS_FROM_L4_MEM_X_DPTEG/ sleep 5
Performance counter stats for 'sleep 5':
0 thread_imc/CPM_CS_FROM_L4_MEM_X_DPTEG/
5.002117947 seconds time elapsed
0.000131000 seconds user
0.001063000 seconds sys
Below is snippet of the warning in dmesg:
BUG: sleeping function called from invalid context at kernel/locking/mutex.c:580
in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 2869, name: perf-exec
preempt_count: 2, expected: 0
4 locks held by perf-exec/2869:
#0: c00000004325c540 (&sig->cred_guard_mutex){+.+.}-{3:3}, at: bprm_execve+0x64/0xa90
#1: c00000004325c5d8 (&sig->exec_update_lock){++++}-{3:3}, at: begin_new_exec+0x460/0xef0
#2: c0000003fa99d4e0 (&cpuctx_lock){-...}-{2:2}, at: perf_event_exec+0x290/0x510
#3: c000000017ab8418 (&ctx->lock){....}-{2:2}, at: perf_event_exec+0x29c/0x510
irq event stamp: 4806
hardirqs last enabled at (4805): [<c000000000f65b94>] _raw_spin_unlock_irqrestore+0x94/0xd0
hardirqs last disabled at (4806): [<c0000000003fae44>] perf_event_exec+0x394/0x510
softirqs last enabled at (0): [<c00000000013c404>] copy_process+0xc34/0x1ff0
softirqs last disabled at (0): [<0000000000000000>] 0x0
CPU: 36 PID: 2869 Comm: perf-exec Not tainted 6.2.0-rc2-00011-g1247637727f2 #61
Hardware name: 8375-42A POWER9 0x4e1202 opal:v7.0-16-g9b85f7d961 PowerNV
Call Trace:
dump_stack_lvl+0x98/0xe0 (unreliable)
__might_resched+0x2f8/0x310
__mutex_lock+0x6c/0x13f0
thread_imc_event_add+0xf4/0x1b0
event_sched_in+0xe0/0x210
merge_sched_in+0x1f0/0x600
visit_groups_merge.isra.92.constprop.166+0x2bc/0x6c0
ctx_flexible_sched_in+0xcc/0x140
ctx_sched_in+0x20c/0x2a0
ctx_resched+0x104/0x1c0
perf_event_exec+0x340/0x510
begin_new_exec+0x730/0xef0
load_elf_binary+0x3f8/0x1e10
...
do not call blocking ops when !TASK_RUNNING; state=2001 set at [<00000000fd63e7cf>] do_nanosleep+0x60/0x1a0
WARNING: CPU: 36 PID: 2869 at kernel/sched/core.c:9912 __might_sleep+0x9c/0xb0
CPU: 36 PID: 2869 Comm: sleep Tainted: G W 6.2.0-rc2-00011-g1247637727f2 #61
Hardware name: 8375-42A POWER9 0x4e1202 opal:v7.0-16-g9b85f7d961 PowerNV
NIP: c000000000194a1c LR: c000000000194a18 CTR: c000000000a78670
REGS: c00000004d2134e0 TRAP: 0700 Tainted: G W (6.2.0-rc2-00011-g1247637727f2)
MSR: 9000000000021033 <SF,HV,ME,IR,DR,RI,LE> CR: 48002824 XER: 00000000
CFAR: c00000000013fb64 IRQMASK: 1
The above warning triggered because the current imc-pmu code uses mutex
lock in interrupt disabled sections. The function mutex_lock()
internally calls __might_resched(), which will check if IRQs are
disabled and in case IRQs are disabled, it will trigger the warning.
Fix the issue by changing the mutex lock to spinlock.
Fixes: 8f95faaac5 ("powerpc/powernv: Detect and create IMC device")
Reported-by: Michael Petlan <mpetlan@redhat.com>
Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
[mpe: Fix comments, trim oops in change log, add reported-by tags]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230106065157.182648-1-kjain@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 74c2f81054 upstream.
The page table check trigger BUG_ON() unexpectedly when split hugepage:
------------[ cut here ]------------
kernel BUG at mm/page_table_check.c:119!
Internal error: Oops - BUG: 00000000f2000800 [#1] SMP
Dumping ftrace buffer:
(ftrace buffer empty)
Modules linked in:
CPU: 7 PID: 210 Comm: transhuge-stres Not tainted 6.1.0-rc3+ #748
Hardware name: linux,dummy-virt (DT)
pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : page_table_check_set.isra.0+0x398/0x468
lr : page_table_check_set.isra.0+0x1c0/0x468
[...]
Call trace:
page_table_check_set.isra.0+0x398/0x468
__page_table_check_pte_set+0x160/0x1c0
__split_huge_pmd_locked+0x900/0x1648
__split_huge_pmd+0x28c/0x3b8
unmap_page_range+0x428/0x858
unmap_single_vma+0xf4/0x1c8
zap_page_range+0x2b0/0x410
madvise_vma_behavior+0xc44/0xe78
do_madvise+0x280/0x698
__arm64_sys_madvise+0x90/0xe8
invoke_syscall.constprop.0+0xdc/0x1d8
do_el0_svc+0xf4/0x3f8
el0_svc+0x58/0x120
el0t_64_sync_handler+0xb8/0xc0
el0t_64_sync+0x19c/0x1a0
[...]
On arm64, pmd_leaf() will return true even if the pmd is invalid due to
pmd_present_invalid() check. So in pmdp_invalidate() the file_map_count
will not only decrease once but also increase once. Then in set_pte_at(),
the file_map_count increase again, and so trigger BUG_ON() unexpectedly.
Add !pmd_present_invalid() check in pmd_user_accessible_page() to fix the
problem.
Fixes: 42b2547137 ("arm64/mm: enable ARCH_SUPPORTS_PAGE_TABLE_CHECK")
Reported-by: Denys Vlasenko <dvlasenk@redhat.com>
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Acked-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20221121073608.4183459-1-liushixin2@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit eb9a85261e upstream.
We currently guard REGSET_{SSVE, ZA} using ARM64_SVE for no good reason.
Both enumerations would be pointless without ARM64_SME and create two empty
entries in aarch64_regsets[] which would then become part of a process's
native regset view (they should be ignored though).
Switch to use ARM64_SME instead.
Fixes: e12310a0d3 ("arm64/sme: Implement ptrace support for streaming mode SVE registers")
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221214135943.379-1-yuzenghui@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 730a11f982 upstream.
Add check for the executable case in pud_user_accessible_page() too
like what we did for pte and pmd.
Fixes: 42b2547137 ("arm64/mm: enable ARCH_SUPPORTS_PAGE_TABLE_CHECK")
Suggested-by: Will Deacon <will@kernel.org>
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Link: https://lore.kernel.org/r/20221122123137.429686-1-liushixin2@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7dde62f068 upstream.
Currently we reject an attempt to restore a SVE signal frame on a system
with SME but not SVE supported. This means that it is not possible to
disable streaming mode via signal return as this is configured via the
flags in the SVE signal context. Instead accept the signal frame, we will
require it to have a vector length of 0 specified and no payload since the
task will have no SVE vector length configured.
Fixes: 85ed24dad2 ("arm64/sme: Implement streaming SVE signal handling")
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221223-arm64-fix-sme-only-v1-2-938d663f69e5@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f26cd73721 upstream.
Currently we only allocate space for SVE signal frames on systems that
support SVE, meaning that SME only systems do not allocate a signal frame
for streaming mode SVE state. Change the check so space is allocated if
either feature is supported.
Fixes: 85ed24dad2 ("arm64/sme: Implement streaming SVE signal handling")
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221223-arm64-fix-sme-only-v1-3-938d663f69e5@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e3f360db08 upstream.
Make sure that *ptr__ within arch_this_cpu_to_op_simple() is only
dereferenced once by using READ_ONCE(). Otherwise the compiler could
generate incorrect code.
Cc: <stable@vger.kernel.org>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 82d3edb50a upstream.
The current cmpxchg_double() loops within the perf hw sampling code do not
have READ_ONCE() semantics to read the old value from memory. This allows
the compiler to generate code which reads the "old" value several times
from memory, which again allows for inconsistencies.
For example:
/* Reset trailer (using compare-double-and-swap) */
do {
te_flags = te->flags & ~SDB_TE_BUFFER_FULL_MASK;
te_flags |= SDB_TE_ALERT_REQ_MASK;
} while (!cmpxchg_double(&te->flags, &te->overflow,
te->flags, te->overflow,
te_flags, 0ULL));
The compiler could generate code where te->flags used within the
cmpxchg_double() call may be refetched from memory and which is not
necessarily identical to the previous read version which was used to
generate te_flags. Which in turn means that an incorrect update could
happen.
Fix this by adding READ_ONCE() semantics to all cmpxchg_double()
loops. Given that READ_ONCE() cannot generate code on s390 which atomically
reads 16 bytes, use a private compare-and-swap-double implementation to
achieve that.
Also replace cmpxchg_double() with the private implementation to be able to
re-use the old value within the loops.
As a side effect this converts the whole code to only use bit fields
to read and modify bits within the hws trailer header.
Reported-by: Alexander Gordeev <agordeev@linux.ibm.com>
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Acked-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Reviewed-by: Thomas Richter <tmricht@linux.ibm.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/linux-s390/Y71QJBhNTIatvxUT@osiris/T/#ma14e2a5f7aa8ed4b94b6f9576799b3ad9c60f333
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 19e183b545 upstream.
A subsequent fix for arm64 will use this parameter to parse the vma
information from the snapshot created by dump_vma_snapshot() rather than
traversing the vma list without the mmap_lock.
Fixes: 6dd8b1a0b6 ("arm64: mte: Dump the MTE tags in the core file")
Cc: <stable@vger.kernel.org> # 5.18.x
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Reported-by: Seth Jenkins <sethjenkins@google.com>
Suggested-by: Seth Jenkins <sethjenkins@google.com>
Cc: Will Deacon <will@kernel.org>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20221222181251.1345752-3-catalin.marinas@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c2337a40e0 upstream.
This commit addresses the following erroneous situation with file-based
kdump executed on a system with a valid IPL report.
On s390, a kdump kernel, its initrd and IPL report if present are loaded
into a special and reserved on boot memory region - crashkernel. When
a system crashes and kdump was activated before, the purgatory code
is entered first which swaps the crashkernel and [0 - crashkernel size]
memory regions. Only after that the kdump kernel is entered. For this
reason, the pointer to an IPL report in lowcore must point to the IPL report
after the swap and not to the address of the IPL report that was located in
crashkernel memory region before the swap. Failing to do so, makes the
kdump's decompressor try to read memory from the crashkernel memory region
which already contains the production's kernel memory.
The situation described above caused spontaneous kdump failures/hangs
on systems where the Secure IPL is activated because on such systems
an IPL report is always present. In that case kdump's decompressor tried
to parse an IPL report which frequently lead to illegal memory accesses
because an IPL report contains addresses to various data.
Cc: <stable@vger.kernel.org>
Fixes: 99feaa717e ("s390/kexec_file: Create ipl report and pass to next kernel")
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4f4c549feb upstream.
The MTE coredump code in arch/arm64/kernel/elfcore.c iterates over the
vma list without the mmap_lock held. This can race with another process
or userfaultfd concurrently modifying the vma list. Change the
for_each_mte_vma macro and its callers to instead use the vma snapshot
taken by dump_vma_snapshot() and stored in the cprm object.
Fixes: 6dd8b1a0b6 ("arm64: mte: Dump the MTE tags in the core file")
Cc: <stable@vger.kernel.org> # 5.18.x
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Reported-by: Seth Jenkins <sethjenkins@google.com>
Suggested-by: Seth Jenkins <sethjenkins@google.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20221222181251.1345752-4-catalin.marinas@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
