Update the mcp3564_read_label() function to use sysfs_emit() for
generating labels.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Marius Cristea <marius.cristea@microchip.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Update the ad7768_read_label() function to use sysfs_emit(() for
generating labels.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Update the ad4030_read_label() function to use sysfs_emit() for generating
labels.
Signed-off-by: Nuno Sá <nuno.sal@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Corrected a spelling mistake in the ltr390 driver:
'recieve_buffer' was renamed to 'receive_buffer'.
This improves code readibility without changing functionality.
Signed-off-by: Sameeksha Sankpal <sameekshasankpal@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
When the device is in ACTIVE mode the temperature and pressure measurements
are collected with a frequency determined by the ST[3:0] bits of CTRL_REG2
register.
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Antoni Pokusinski <apokusinski01@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
MPL3115 sensor features a "data ready" interrupt which indicates the
presence of new measurements.
Signed-off-by: Antoni Pokusinski <apokusinski01@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Rename the bitfield macros of CTRL_REG1, so that their names clearly
indicate their relation to CTRL_REG1.
This is a preparation for introducing the support for the DRDY interrupt
which requires the usage of other control registers.
Signed-off-by: Antoni Pokusinski <apokusinski01@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Factor out the code responsible for collecting data for the triggered
buffer from the trigger handler into a separate function.
Signed-off-by: Antoni Pokusinski <apokusinski01@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
MPL3115 is an I2C pressure and temperature sensor. It features 2
interrupt lines which can be configured to indicate events such as data
ready or pressure/temperature threshold reached.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Antoni Pokusinski <apokusinski01@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Change the allocation strategy of the 8 SETUP registers from a least-
recently-used (LRU) to a first-come-first-served basis.
The AD7124 chips can have up to 16 channels enabled at a time in the
sequencer for buffered reads, but only have 8 SETUP configurations
(namely the OFFSET, GAIN, CONFIG and FILTER registers) that must be
shared among the 16 channels. This means some of the channels must use
the exact same configuration parameters so that they can share a single
SETUP group of registers. The previous LRU strategy did not keep track
of how many different configurations were requested at the same time,
so if there were more than 8 different configurations requested, some
channels would end up using the incorrect configuration because the slot
assigned to them would also be assigned to a different configuration
that wrote over it later.
Adding such tracking to solve this would make an already complex
algorithm even more complex. Instead we can replace it with a simpler
first-come-first-serve strategy. This makes it easy to track how many
different configurations are being requested at the same time. This
comes at the expense of slightly longer setup times for buffered reads
since all setup registers must be written each time when a buffered read
is enabled. But this is generally not considered a hot path where
performance is critical, so should be acceptable.
This new strategy also makes hardware debugging easier since SETUPs are
now assigned in a deterministic manner and in a logical order.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use the same .ext_info for the temperature channel as for the voltage
channels. In the ADC, these all go though a mux to select the source
and otherwise operate the same.
These attributes probably won't be used much, but since it is trivial
to add this, we might as well include them.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use devm_mutex_init() since it brings some benefits when
CONFIG_DEBUG_MUTEXES is enabled.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cross-references to iio_tools.rst (IIO Interfacing Tools) and
iio_devbuf.rst (Industrial IIO device buffers) are shown in inline
code instead. Convert them to proper cross-references.
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add ABI documentation for accelerometer event-related sysfs attributes
exposed by the bmi270 driver. These include threshold, period, and
enable controls for adaptive magnitude (any-motion) and rate of change
(no-motion) event detection.
Signed-off-by: Gustavo Silva <gustavograzs@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Any-motion event can be enabled on a per-axis basis and triggers a
combined event when motion is detected on any axis.
No-motion event is triggered if the rate of change on all axes falls
below a specified threshold for a configurable duration. A fake channel
is used to report this event.
Threshold and duration can be configured from userspace.
Signed-off-by: Gustavo Silva <gustavograzs@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Set the interrupt type to rising edge within the example block in order
to match the new driver.
The entry that got replaced was not in use by the original driver.
Signed-off-by: Petre Rodan <petre.rodan@subdimension.ro>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Assert CPOL for a high-idle clock signal and CPHA for sampling on the
trailing (rising) edge.
Quoting from the datasheet:
"During the transitions on CSB, SCK must be high. SDI and SDO are driven
at the falling edge of SCK and should be captured at the rising edge of
SCK."
The sensor does not function with the default SPI clock mode.
Fixes: 7dbd479425 ("dt-bindings:iio:accel:bosch,bma220 device tree binding documentation")
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Petre Rodan <petre.rodan@subdimension.ro>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cleanup typo present in the title.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Petre Rodan <petre.rodan@subdimension.ro>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Document that the callback registered with iio_channel_get_all_cb()
must be safe to call from any context since it is called from by
iio_push_to_buffer() which can be called in any context.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Document that the struct iio_buffer_access_funcs.store_to() callback
must be safe to call from any context since it is called from
iio_push_to_buffer() which may be called from any context.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Document that iio_push_to_buffers() can be called from any context.
Also document the Return: value while here.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Replace the documentation of iio_push_to_buffers_with_timestamp() with
a deprecation notice pointing to the preferred alternative.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Document the iio_push_to_buffers_with_ts() function.
This is copied and slightly cleaned up from
iio_push_to_buffers_with_timestamp().
Signed-off-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Call might_sleep() in iio_push_to_buffers_with_ts_unaligned() since it
can allocate memory, which may sleep.
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add Context: documentation comment that
iio_push_to_buffers_with_ts_unaligned() may sleep because it calls
devm_krealloc().
Also document Return: value while here.
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Remove __ad7124_set_channel() wrapper function. This just added an
unnecessary layer of indirection with an extra call to container_of().
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use devm_mutex_init() to initialize the mutex to handle automatically
freeing in debug builds.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use AD7124_MAX_CHANNELS macro instead of hardcoding 16 in
ad7124_disable_all(). We already have the macro, so we should use it.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Remove the unused `nr` field from the `ad7124_channel` struct. There
are no more users of this field (it is only assigned to but never read)
so can be removed.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Inline ad7124_enable_channel() at the only call site. This simplifies
the code by avoiding a bit of extra indirection.
ch->nr is replaced by address as that is the same value and avoids more
indirection.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add a boolean debugfs attribute to allow disabling the SINGLE_CYCLE
bit in the FILTER registers.
This causes data to be read on every conversion instead of doing the
usual 3 or 4 conversions per sample (depending on the filter). This is
only needed for very specific use cases, such as validating the
performance of the ADC. So we just expose this feature through debugfs
for the rare cases where it is needed by people who really know what
they are doing.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
One revert because of a regression in the I2C core which has sadly not
showed up during its time in -next.
-----BEGIN PGP SIGNATURE-----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=b0xy
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-6.18-rc1-hotfix' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fix from Wolfram Sang:
"One revert because of a regression in the I2C core which has sadly not
showed up during its time in -next"
* tag 'i2c-for-6.18-rc1-hotfix' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
Revert "i2c: boardinfo: Annotate code used in init phase only"
reserved and accessing reserved register space could result in undefined
behavior
- Fix a function's retval check in aspeed-scu-ic
-----BEGIN PGP SIGNATURE-----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=dVwm
-----END PGP SIGNATURE-----
Merge tag 'irq_urgent_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Borislav Petkov:
- Skip interrupt ID 0 in sifive-plic during suspend/resume because
ID 0 is reserved and accessing reserved register space could result
in undefined behavior
- Fix a function's retval check in aspeed-scu-ic
* tag 'irq_urgent_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/sifive-plic: Avoid interrupt ID 0 handling during suspend/resume
irqchip/aspeed-scu-ic: Fix an IS_ERR() vs NULL check
The previous fix to trace_marker required updating trace_marker_raw
as well. The difference between trace_marker_raw from trace_marker
is that the raw version is for applications to write binary structures
directly into the ring buffer instead of writing ASCII strings.
This is for applications that will read the raw data from the ring
buffer and get the data structures directly. It's a bit quicker than
using the ASCII version.
Unfortunately, it appears that our test suite has several tests that
test writes to the trace_marker file, but lacks any tests to the
trace_marker_raw file (this needs to be remedied). Two issues came
about the update to the trace_marker_raw file that syzbot found:
- Fix tracing_mark_raw_write() to use per CPU buffer
The fix to use the per CPU buffer to copy from user space was needed for
both the trace_maker and trace_maker_raw file.
The fix for reading from user space into per CPU buffers properly fixed
the trace_marker write function, but the trace_marker_raw file wasn't
fixed properly. The user space data was correctly written into the per CPU
buffer, but the code that wrote into the ring buffer still used the user
space pointer and not the per CPU buffer that had the user space data
already written.
- Stop the fortify string warning from writing into trace_marker_raw
After converting the copy_from_user_nofault() into a memcpy(), another
issue appeared. As writes to the trace_marker_raw expects binary data, the
first entry is a 4 byte identifier. The entry structure is defined as:
struct {
struct trace_entry ent;
int id;
char buf[];
};
The size of this structure is reserved on the ring buffer with:
size = sizeof(*entry) + cnt;
Then it is copied from the buffer into the ring buffer with:
memcpy(&entry->id, buf, cnt);
This use to be a copy_from_user_nofault(), but now converting it to
a memcpy() triggers the fortify-string code, and causes a warning.
The allocated space is actually more than what is copied, as the cnt
used also includes the entry->id portion. Allocating sizeof(*entry)
plus cnt is actually allocating 4 bytes more than what is needed.
Change the size function to:
size = struct_size(entry, buf, cnt - sizeof(entry->id));
And update the memcpy() to unsafe_memcpy().
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaOq0fhQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qr4HAQCNbFEDjzNNEueCWLOptC5YfeJgdvPB
399CzuFJl02ZOgD/flPJa1r+NaeYOBhe1BgpFF9FzB/SPXAXkXUGLM7WIgg=
=goks
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
"The previous fix to trace_marker required updating trace_marker_raw as
well. The difference between trace_marker_raw from trace_marker is
that the raw version is for applications to write binary structures
directly into the ring buffer instead of writing ASCII strings. This
is for applications that will read the raw data from the ring buffer
and get the data structures directly. It's a bit quicker than using
the ASCII version.
Unfortunately, it appears that our test suite has several tests that
test writes to the trace_marker file, but lacks any tests to the
trace_marker_raw file (this needs to be remedied). Two issues came
about the update to the trace_marker_raw file that syzbot found:
- Fix tracing_mark_raw_write() to use per CPU buffer
The fix to use the per CPU buffer to copy from user space was
needed for both the trace_maker and trace_maker_raw file.
The fix for reading from user space into per CPU buffers properly
fixed the trace_marker write function, but the trace_marker_raw
file wasn't fixed properly. The user space data was correctly
written into the per CPU buffer, but the code that wrote into the
ring buffer still used the user space pointer and not the per CPU
buffer that had the user space data already written.
- Stop the fortify string warning from writing into trace_marker_raw
After converting the copy_from_user_nofault() into a memcpy(),
another issue appeared. As writes to the trace_marker_raw expects
binary data, the first entry is a 4 byte identifier. The entry
structure is defined as:
struct {
struct trace_entry ent;
int id;
char buf[];
};
The size of this structure is reserved on the ring buffer with:
size = sizeof(*entry) + cnt;
Then it is copied from the buffer into the ring buffer with:
memcpy(&entry->id, buf, cnt);
This use to be a copy_from_user_nofault(), but now converting it to
a memcpy() triggers the fortify-string code, and causes a warning.
The allocated space is actually more than what is copied, as the
cnt used also includes the entry->id portion. Allocating
sizeof(*entry) plus cnt is actually allocating 4 bytes more than
what is needed.
Change the size function to:
size = struct_size(entry, buf, cnt - sizeof(entry->id));
And update the memcpy() to unsafe_memcpy()"
* tag 'trace-v6.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Stop fortify-string from warning in tracing_mark_raw_write()
tracing: Fix tracing_mark_raw_write() to use buf and not ubuf
- Fix UAPI types check in headers_check.pl
- Only enable -Werror for hostprogs with CONFIG_WERROR / W=e
- Ignore fsync() error when output of gen_init_cpio is a pipe
- Several little build fixes for recent modules.builtin.modinfo series
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR74yXHMTGczQHYypIdayaRccAalgUCaOqyGgAKCRAdayaRccAa
lhIaAP4owzRbZv/KnwVgXt3IDlAN7tOJQyiNbuAOTTH9IewvhAEA24zfrlav7CQl
WSc0d/poWAdmQJc0T/bdQ71G69j6dgQ=
=ljuS
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux
Pull Kbuild fixes from Nathan Chancellor:
- Fix UAPI types check in headers_check.pl
- Only enable -Werror for hostprogs with CONFIG_WERROR / W=e
- Ignore fsync() error when output of gen_init_cpio is a pipe
- Several little build fixes for recent modules.builtin.modinfo series
* tag 'kbuild-fixes-6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux:
kbuild: Use '--strip-unneeded-symbol' for removing module device table symbols
s390/vmlinux.lds.S: Move .vmlinux.info to end of allocatable sections
kbuild: Add '.rel.*' strip pattern for vmlinux
kbuild: Restore pattern to avoid stripping .rela.dyn from vmlinux
gen_init_cpio: Ignore fsync() returning EINVAL on pipes
scripts/Makefile.extrawarn: Respect CONFIG_WERROR / W=e for hostprogs
kbuild: uapi: Strip comments before size type check
Fixes only in drivers (ufs, mvsas, qla2xxx, target) that came in just
before or during the merge window. The most important one is the
qla2xxx which reverts a conversion to fix flexible array member
warnings, that went up in this merge window but which turned out on
further testing to be causing data corruption.
Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
-----BEGIN PGP SIGNATURE-----
iLgEABMIAGAWIQTnYEDbdso9F2cI+arnQslM7pishQUCaOpnUhsUgAAAAAAEAA5t
YW51MiwyLjUrMS4xMSwyLDImHGphbWVzLmJvdHRvbWxleUBoYW5zZW5wYXJ0bmVy
c2hpcC5jb20ACgkQ50LJTO6YrIUCFQEA1cADof79U9suDka2hAa2l7D4wJQ53qSj
R7CwarAVX2wA/3RaEHySnSk+ivyHRl5AOYlPrYsnBo1o2KUq1M6kfviM
=itgd
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Fixes only in drivers (ufs, mvsas, qla2xxx, target) that came in just
before or during the merge window.
The most important one is the qla2xxx which reverts a conversion to
fix flexible array member warnings, that went up in this merge window
but which turned out on further testing to be causing data corruption"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: core: Include UTP error in INT_FATAL_ERRORS
scsi: ufs: sysfs: Make HID attributes visible
scsi: mvsas: Fix use-after-free bugs in mvs_work_queue
scsi: ufs: core: Fix PM QoS mutex initialization
scsi: ufs: core: Fix runtime suspend error deadlock
Revert "scsi: qla2xxx: Fix memcpy() field-spanning write issue"
scsi: target: target_core_configfs: Add length check to avoid buffer overflow
emulator in favor of int3_emulate_jcc() which is written in C
- Replace KVM fastops with C-based stubs which avoids problems with the
fastop infra related to latter not adhering to the C ABI due to their
special calling convention and, more importantly, bypassing compiler
control-flow integrity checking because they're written in asm
- Remove wrongly used static branches and other ugliness accumulated
over time in hyperv's hypercall implementation with a proper static
function call to the correct hypervisor call variant
- Add some fixes and modifications to allow running FRED-enabled kernels
in KVM even on non-FRED hardware
- Add kCFI improvements like validating indirect calls and prepare for
enabling kCFI with GCC. Add cmdline params documentation and other
code cleanups
- Use the single-byte 0xd6 insn as the official #UD single-byte
undefined opcode instruction as agreed upon by both x86 vendors
- Other smaller cleanups and touchups all over the place
-----BEGIN PGP SIGNATURE-----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=3Otb
-----END PGP SIGNATURE-----
Merge tag 'x86_core_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull more x86 updates from Borislav Petkov:
- Remove a bunch of asm implementing condition flags testing in KVM's
emulator in favor of int3_emulate_jcc() which is written in C
- Replace KVM fastops with C-based stubs which avoids problems with the
fastop infra related to latter not adhering to the C ABI due to their
special calling convention and, more importantly, bypassing compiler
control-flow integrity checking because they're written in asm
- Remove wrongly used static branches and other ugliness accumulated
over time in hyperv's hypercall implementation with a proper static
function call to the correct hypervisor call variant
- Add some fixes and modifications to allow running FRED-enabled
kernels in KVM even on non-FRED hardware
- Add kCFI improvements like validating indirect calls and prepare for
enabling kCFI with GCC. Add cmdline params documentation and other
code cleanups
- Use the single-byte 0xd6 insn as the official #UD single-byte
undefined opcode instruction as agreed upon by both x86 vendors
- Other smaller cleanups and touchups all over the place
* tag 'x86_core_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
x86,retpoline: Optimize patch_retpoline()
x86,ibt: Use UDB instead of 0xEA
x86/cfi: Remove __noinitretpoline and __noretpoline
x86/cfi: Add "debug" option to "cfi=" bootparam
x86/cfi: Standardize on common "CFI:" prefix for CFI reports
x86/cfi: Document the "cfi=" bootparam options
x86/traps: Clarify KCFI instruction layout
compiler_types.h: Move __nocfi out of compiler-specific header
objtool: Validate kCFI calls
x86/fred: KVM: VMX: Always use FRED for IRQs when CONFIG_X86_FRED=y
x86/fred: Play nice with invoking asm_fred_entry_from_kvm() on non-FRED hardware
x86/fred: Install system vector handlers even if FRED isn't fully enabled
x86/hyperv: Use direct call to hypercall-page
x86/hyperv: Clean up hv_do_hypercall()
KVM: x86: Remove fastops
KVM: x86: Convert em_salc() to C
KVM: x86: Introduce EM_ASM_3WCL
KVM: x86: Introduce EM_ASM_1SRC2
KVM: x86: Introduce EM_ASM_2CL
KVM: x86: Introduce EM_ASM_2W
...
version supports the =@ccCOND syntax
- Remove a bunch of AS_* Kconfig symbols which detect assembler support for
various instruction mnemonics now that the minimum assembler version
supports them all
- The usual cleanups all over the place
-----BEGIN PGP SIGNATURE-----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=dW6J
-----END PGP SIGNATURE-----
Merge tag 'x86_cleanups_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cleanups from Borislav Petkov:
- Simplify inline asm flag output operands now that the minimum
compiler version supports the =@ccCOND syntax
- Remove a bunch of AS_* Kconfig symbols which detect assembler support
for various instruction mnemonics now that the minimum assembler
version supports them all
- The usual cleanups all over the place
* tag 'x86_cleanups_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/asm: Remove code depending on __GCC_ASM_FLAG_OUTPUTS__
x86/sgx: Use ENCLS mnemonic in <kernel/cpu/sgx/encls.h>
x86/mtrr: Remove license boilerplate text with bad FSF address
x86/asm: Use RDPKRU and WRPKRU mnemonics in <asm/special_insns.h>
x86/idle: Use MONITORX and MWAITX mnemonics in <asm/mwait.h>
x86/entry/fred: Push __KERNEL_CS directly
x86/kconfig: Remove CONFIG_AS_AVX512
crypto: x86 - Remove CONFIG_AS_VPCLMULQDQ
crypto: X86 - Remove CONFIG_AS_VAES
crypto: x86 - Remove CONFIG_AS_GFNI
x86/kconfig: Drop unused and needless config X86_64_SMP
preserve vmalloc allocations across handover.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaOmDWAAKCRDdBJ7gKXxA
jh+MAQDUPBj3mFm238CXI5DC1gJ3ETe3NJjJvfzIjLs51c+dFgD+PUuvDA0GUtKH
LCl6T+HJXh2FgGn1F2Kl/0hwPtEvuA4=
=HYr7
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2025-10-10-15-03' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more updates from Andrew Morton:
"Just one series here - Mike Rappoport has taught KEXEC handover to
preserve vmalloc allocations across handover"
* tag 'mm-nonmm-stable-2025-10-10-15-03' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
lib/test_kho: use kho_preserve_vmalloc instead of storing addresses in fdt
kho: add support for preserving vmalloc allocations
kho: replace kho_preserve_phys() with kho_preserve_pages()
kho: check if kho is finalized in __kho_preserve_order()
MAINTAINERS, .mailmap: update Umang's email address
All singletons, please see the changelogs for details.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaOmCTwAKCRDdBJ7gKXxA
jtQZAQC9sRd+4LNYothoXlY9avKNYR4YvN3ogiIFJqHwiENu/QD/ec/57KME9dA4
H4SqK/49Rs/tVCYmkPTO7IWRmxo9/AA=
=h9On
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2025-10-10-15-00' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"7 hotfixes. All 7 are cc:stable and all 7 are for MM.
All singletons, please see the changelogs for details"
* tag 'mm-hotfixes-stable-2025-10-10-15-00' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm: hugetlb: avoid soft lockup when mprotect to large memory area
fsnotify: pass correct offset to fsnotify_mmap_perm()
mm/ksm: fix flag-dropping behavior in ksm_madvise
mm/damon/vaddr: do not repeat pte_offset_map_lock() until success
mm/rmap: fix soft-dirty and uffd-wp bit loss when remapping zero-filled mTHP subpage to shared zeropage
mm/thp: fix MTE tag mismatch when replacing zero-filled subpages
memcg: skip cgroup_file_notify if spinning is not allowed
The fix to use a per CPU buffer to read user space tested only the writes
to trace_marker. But it appears that the selftests are missing tests to
the trace_maker_raw file. The trace_maker_raw file is used by applications
that writes data structures and not strings into the file, and the tools
read the raw ring buffer to process the structures it writes.
The fix that reads the per CPU buffers passes the new per CPU buffer to
the trace_marker file writes, but the update to the trace_marker_raw write
read the data from user space into the per CPU buffer, but then still used
then passed the user space address to the function that records the data.
Pass in the per CPU buffer and not the user space address.
TODO: Add a test to better test trace_marker_raw.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/20251011035243.386098147@kernel.org
Fixes: 64cf7d058a ("tracing: Have trace_marker use per-cpu data to read user space")
Reported-by: syzbot+9a2ede1643175f350105@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/68e973f5.050a0220.1186a4.0010.GAE@google.com/
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
After commit 5ab23c7923 ("modpost: Create modalias for builtin
modules"), relocatable RISC-V kernels with CONFIG_KASAN=y start failing
when attempting to strip the module device table symbols:
riscv64-linux-objcopy: not stripping symbol `__mod_device_table__kmod_irq_starfive_jh8100_intc__of__starfive_intc_irqchip_match_table' because it is named in a relocation
make[4]: *** [scripts/Makefile.vmlinux:97: vmlinux] Error 1
The relocation appears to come from .LASANLOC5 in .data.rel.local:
$ llvm-objdump --disassemble-symbols=.LASANLOC5 --disassemble-all -r drivers/irqchip/irq-starfive-jh8100-intc.o
drivers/irqchip/irq-starfive-jh8100-intc.o: file format elf64-littleriscv
Disassembly of section .data.rel.local:
0000000000000180 <.LASANLOC5>:
...
1d0: 0000 unimp
00000000000001d0: R_RISCV_64 __mod_device_table__kmod_irq_starfive_jh8100_intc__of__starfive_intc_irqchip_match_table
...
This section appears to come from GCC for including additional
information about global variables that may be protected by KASAN.
There appears to be no way to opt out of the generation of these symbols
through either a flag or attribute. Attempting to remove '.LASANLOC*'
with '--strip-symbol' results in the same error as above because these
symbols may refer to (thus have relocation between) each other.
Avoid this build breakage by switching to '--strip-unneeded-symbol' for
removing __mod_device_table__ symbols, as it will only remove the symbol
when there is no relocation pointing to it. While this may result in a
little more bloat in the symbol table in certain configurations, it is
not as bad as outright build failures.
Fixes: 5ab23c7923 ("modpost: Create modalias for builtin modules")
Reported-by: Charles Mirabile <cmirabil@redhat.com>
Closes: https://lore.kernel.org/20251007011637.2512413-1-cmirabil@redhat.com/
Suggested-by: Alexey Gladkov <legion@kernel.org>
Tested-by: Nicolas Schier <nsc@kernel.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
