The PCIe endpoint core relies on the drivers that invoke the
pci_epc_add_epf() API to allocate and assign a function number
to each physical function (PF). Since endpoint function device can
be created by multiple mechanisms (configfs, devicetree, etc..),
allowing each of these mechanisms to assign a function number
would result in mutliple endpoint function devices having the
same function number. In order to avoid this, let EPC core assign
a function number to the endpoint device.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Protect concurrent access to pci_epf_ops with a mutex.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Add the new NL80211_CMD_SET_TID_CONFIG command to support
data TID specific configuration. Per TID configuration is
passed in the nested NL80211_ATTR_TID_CONFIG attribute.
This patch adds support to configure per TID noack policy
through the NL80211_TID_CONFIG_ATTR_NOACK attribute.
Signed-off-by: Tamizh chelvam <tamizhr@codeaurora.org>
Link: https://lore.kernel.org/r/1579506687-18296-2-git-send-email-tamizhr@codeaurora.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
pci-epc-mem uses a bitmap to manage the Endpoint outbound (OB) address
region. This address region will be shared by multiple endpoint
functions (in the case of multi function endpoint) and it has to be
protected from concurrent access to avoid updating an inconsistent state.
Use a mutex to protect bitmap updates to prevent the memory
allocation API from returning incorrect addresses.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: stable@vger.kernel.org # v4.14+
The pci_epc_ops is not intended to be invoked from interrupt context.
Hence replace spin_lock_irqsave and spin_unlock_irqrestore with
mutex_lock and mutex_unlock respectively.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Use atomic_notifier_call_chain() to notify EPC events like linkup to EPF
driver instead of using linkup ops in EPF driver. This is in preparation
for adding proper locking mechanism to EPF ops. This will also enable to
add more events (in addition to linkup) in the future.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Tested-by: Vidya Sagar <vidyas@nvidia.com>
IEEE P802.11-REVmd/D3.0 adds support for protecting Beacon frames using
a new set of keys (BIGTK; key index 6..7) similarly to the way
group-addressed Robust Management frames are protected (IGTK; key index
4..5). Extend cfg80211 and nl80211 to allow the new BIGTK to be
configured. Add an extended feature flag to indicate driver support for
the new key index values to avoid array overflows in driver
implementations and also to indicate to user space when this
functionality is available.
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Link: https://lore.kernel.org/r/20200222132548.20835-2-jouni@codeaurora.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The field "reg_notifier" was already documented above the definition of
struct wiphy. The comment inside the definition of the struct did not
bring more information.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200221115604.594035-6-Jerome.Pouiller@silabs.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The field "perm_addr" was already documented above the definition of
struct wiphy. Comments were almost identical.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200221115604.594035-5-Jerome.Pouiller@silabs.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The field "_net" was already documented above the definition of struct
wiphy. Both comments were identical.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200221115604.594035-4-Jerome.Pouiller@silabs.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Field "registered" was documented three times: twice in the
documentation block of struct wiphy and once inside the struct
definition. This patch keep only one comment.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200221115604.594035-3-Jerome.Pouiller@silabs.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The field "privid" was already documented above the definition of struct
wiphy. Comments were not identical, but they said more or less the same
thing.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200221115604.594035-2-Jerome.Pouiller@silabs.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The field "probe_resp_offload" was already documented above the
definition of struct wiphy. Both comments were identical.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200221115604.594035-1-Jerome.Pouiller@silabs.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This reverts commit 8c3ed7aa2b.
As Jouni points out, there's really no need for this, since the
RSN pre-authentication frames are normal data frames, not port
control frames (locally).
We can still revert this now since it hasn't actually gone beyond
-next.
Fixes: 8c3ed7aa2b ("nl80211: add src and dst addr attributes for control port tx/rx")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://lore.kernel.org/r/20200224101910.b746e263287a.I9eb15d6895515179d50964dec3550c9dc784bb93@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The A53 CCM clk root only accepts input up to 1GHz, CCM A53 root
signoff timing is 1Ghz, however the A53 core which sources from CCM
root could run above 1GHz which voilates the CCM.
There is a CORE_SEL slice before A53 core, we need configure the
CORE_SEL slice source from ARM PLL, not A53 CCM clk root.
The A53 CCM clk root should only be used when need to change ARM PLL
frequency.
Add arm_a53_core clk that could source from arm_a53_div and arm_pll_out.
Configure a53 ccm root sources from 800MHz sys pll
Configure a53 core sources from arm_pll_out
Mark arm_a53_core as critical clk
Reviewed-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The A53 CCM clk root only accepts input up to 1GHz, CCM A53 root
signoff timing is 1Ghz, however the A53 core which sources from CCM
root could run above 1GHz which voilates the CCM.
There is a CORE_SEL slice before A53 core, we need configure the
CORE_SEL slice source from ARM PLL, not A53 CCM clk root.
The A53 CCM clk root should only be used when need to change ARM PLL
frequency.
Add arm_a53_core clk that could source from arm_a53_div and arm_pll_out.
Configure a53 ccm root sources from 800MHz sys pll
Configure a53 core sources from arm_pll_out
Mark arm_a53_core as critical clk.
Fixes: 96d6392b54 ("clk: imx: Add support for i.MX8MN clock driver")
Reviewed-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The A53 CCM clk root only accepts input up to 1GHz, CCM A53 root
signoff timing is 1Ghz, however the A53 core which sources from CCM
root could run above 1GHz which voilates the CCM.
There is a CORE_SEL slice before A53 core, we need configure the
CORE_SEL slice source from ARM PLL, not A53 CCM clk root.
The A53 CCM clk root should only be used when need to change ARM PLL
frequency.
Add arm_a53_core clk that could source from arm_a53_div and arm_pll_out.
Configure a53 ccm root sources from 800MHz sys pll
Configure a53 core sources from arm_pll_out
Mark arm_a53_core as critical clock
Fixes: ba5625c3e2 ("clk: imx: Add clock driver support for imx8mm")
Reviewed-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The A53 CCM clk root only accepts input up to 1GHz, CCM A53 root
signoff timing is 1Ghz, however the A53 core which sources from CCM
root could run above 1GHz which violates the CCM.
There is a CORE_SEL slice before A53 core, we need to configure the
CORE_SEL slice source from ARM PLL, not A53 CCM clk root.
The A53 CCM clk root should only be used when need to change ARM PLL
frequency.
Add arm_a53_core clk that could source from arm_a53_div and arm_pll_out.
Configure a53 ccm root sources from 800MHz sys pll
Configure a53 core sources from arm_pll_out
Mark arm_a53_core as critical clock
Fixes: db27e40b27 ("clk: imx8mq: Add the missing ARM clock")
Reviewed-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This is not used by linux and not supported as part of imx SCU api, it
was added by mistake.
The constant value "9" has since been reassigned in firmware to a
different service.
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
On i.MX8MP, internal HDMI 27M clock is actually 24MHz, so rename
the IMX8MP_CLK_HDMI_27M to IMX8MP_CLK_HDMI_24M.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Now that we have introduced new, generic ways for the OS loader to
interface with Linux kernels during boot, we need to record this
fact in a way that allows loaders to discover this information, and
fall back to the existing methods for older kernels.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Now that we have added new ways to load the initrd or the mixed mode
kernel, we will also need a way to tell the loader about this. Add
symbolic constants for the PE/COFF major/minor version numbers (which
fortunately have always been 0x0 for all architectures), so that we
can bump them later to document the capabilities of the stub.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Take the newly introduced EFI_RT_PROPERTIES_TABLE configuration table
into account, which carries a mask of which EFI runtime services are
still functional after ExitBootServices() has been called by the OS.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Revision 2.8 of the UEFI spec introduces provisions for firmware to
advertise lack of support for certain runtime services at OS runtime.
Let's store this mask in struct efi for easy access.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Push the FDT params specific types and definition into fdtparams.c,
and instead, pass a reference to the memory map data structure and
populate it directly, and return the system table address as the
return value.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
The systab member in struct efi has outlived its usefulness, now that
we have better ways to access the only piece of information we are
interested in after init, which is the EFI runtime services table
address. So instead of instantiating a doctored copy at early boot
with lots of mangled values, and switching the pointer when switching
into virtual mode, let's grab the values we need directly, and get
rid of the systab pointer entirely.
Tested-by: Tony Luck <tony.luck@intel.com> # arch/ia64
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Instead of going through the EFI system table each time, just copy the
runtime services table pointer into struct efi directly. This is the
last use of the system table pointer in struct efi, allowing us to
drop it in a future patch, along with a fair amount of quirky handling
of the translated address.
Note that usually, the runtime services pointer changes value during
the call to SetVirtualAddressMap(), so grab the updated value as soon
as that call returns. (Mixed mode uses a 1:1 mapping, and kexec boot
enters with the updated address in the system table, so in those cases,
we don't need to do anything here)
Tested-by: Tony Luck <tony.luck@intel.com> # arch/ia64
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
There is some code that exposes physical addresses of certain parts of
the EFI firmware implementation via sysfs nodes. These nodes are only
used on x86, and are of dubious value to begin with, so let's move
their handling into the x86 arch code.
Tested-by: Tony Luck <tony.luck@intel.com> # arch/ia64
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
config_parse_tables() is a jumble of pointer arithmetic, due to the
fact that on x86, we may be dealing with firmware whose native word
size differs from the kernel's.
This is not a concern on other architectures, and doesn't quite
justify the state of the code, so let's clean it up by adding a
non-x86 code path, constifying statically allocated tables and
replacing preprocessor conditionals with IS_ENABLED() checks.
Tested-by: Tony Luck <tony.luck@intel.com> # arch/ia64
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
The efi_config_init() routine is no longer shared with ia64 so let's
move it into the x86 arch code before making further x86 specific
changes to it.
Tested-by: Tony Luck <tony.luck@intel.com> # arch/ia64
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
We have three different versions of the code that checks the EFI system
table revision and copies the firmware vendor string, and they are
mostly equivalent, with the exception of the use of early_memremap_ro
vs. __va() and the lowest major revision to warn about. Let's move this
into common code and factor out the commonalities.
Tested-by: Tony Luck <tony.luck@intel.com> # arch/ia64
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
There is no need for struct efi to carry the address of the memreserve
table and share it with the world. So move it out and make it
__initdata as well.
Tested-by: Tony Luck <tony.luck@intel.com> # arch/ia64
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
The memory attributes table is only used at init time by the core EFI
code, so there is no need to carry its address in struct efi that is
shared with the world. So move it out, and make it __ro_after_init as
well, considering that the value is set during early boot.
Tested-by: Tony Luck <tony.luck@intel.com> # arch/ia64
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Move the rng_seed table address from struct efi into a static global
variable in efi.c, which is the only place we ever refer to it anyway.
This reduces the footprint of struct efi, which is a r/w data structure
that is shared with the world.
Tested-by: Tony Luck <tony.luck@intel.com> # arch/ia64
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
The UGA table is x86 specific (its handling was introduced when the
EFI support code was modified to accommodate IA32), so there is no
need to handle it in generic code.
The EFI properties table is not strictly x86 specific, but it was
deprecated almost immediately after having been introduced, due to
implementation difficulties. Only x86 takes it into account today,
and this is not going to change, so make this table x86 only as well.
Tested-by: Tony Luck <tony.luck@intel.com> # arch/ia64
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
The HCDP and MPS tables are Itanium specific EFI config tables, so
move their handling to ia64 arch code.
Tested-by: Tony Luck <tony.luck@intel.com> # arch/ia64
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Some plumbing exists to handle a UEFI configuration table of type
BOOT_INFO but since we never match it to a GUID anywhere, we never
actually register such a table, or access it, for that matter. So
simply drop all mentions of it.
Tested-by: Tony Luck <tony.luck@intel.com> # arch/ia64
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
There are currently two ways to specify the initrd to be passed to the
Linux kernel when booting via the EFI stub:
- it can be passed as a initrd= command line option when doing a pure PE
boot (as opposed to the EFI handover protocol that exists for x86)
- otherwise, the bootloader or firmware can load the initrd into memory,
and pass the address and size via the bootparams struct (x86) or
device tree (ARM)
In the first case, we are limited to loading from the same file system
that the kernel was loaded from, and it is also problematic in a trusted
boot context, given that we cannot easily protect the command line from
tampering without either adding complicated white/blacklisting of boot
arguments or locking down the command line altogether.
In the second case, we force the bootloader to duplicate knowledge about
the boot protocol which is already encoded in the stub, and which may be
subject to change over time, e.g., bootparams struct definitions, memory
allocation/alignment requirements for the placement of the initrd etc etc.
In the ARM case, it also requires the bootloader to modify the hardware
description provided by the firmware, as it is passed in the same file.
On systems where the initrd is measured after loading, it creates a time
window where the initrd contents might be manipulated in memory before
handing over to the kernel.
Address these concerns by adding support for loading the initrd into
memory by invoking the EFI LoadFile2 protocol installed on a vendor
GUIDed device path that specifically designates a Linux initrd.
This addresses the above concerns, by putting the EFI stub in charge of
placement in memory and of passing the base and size to the kernel proper
(via whatever means it desires) while still leaving it up to the firmware
or bootloader to obtain the file contents, potentially from other file
systems than the one the kernel itself was loaded from. On platforms that
implement measured boot, it permits the firmware to take the measurement
right before the kernel actually consumes the contents.
Acked-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
In preparation of adding support for loading the initrd via a special
device path, add the struct definition of a vendor GUIDed device path
node to efi.h.
Since we will be producing these data structures rather than just
consumsing the ones instantiated by the firmware, refactor the various
device path node definitions so we can take the size of each node using
sizeof() rather than having to resort to opaque arithmetic in the static
initializers.
While at it, drop the #if IS_ENABLED() check for the declaration of
efi_get_device_by_path(), which is unnecessary, and constify its first
argument as well.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Add the protocol definitions, GUIDs and mixed mode glue so that
the EFI loadfile protocol can be used from the stub. This will
be used in a future patch to load the initrd.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Move all the declarations that are only used in stub code from
linux/efi.h to efistub.h which is only included locally.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Align the naming of efi_file_io_interface_t and efi_file_handle_t with
the UEFI spec, and call them efi_simple_file_system_protocol_t and
efi_file_protocol_t, respectively, using the same convention we use
for all other type definitions that originate in the UEFI spec.
While at it, move the definitions to efistub.h, so they are only seen
by code that needs them.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
The implementation of efi_high_alloc() uses a complicated way of
traversing the memory map to find an available region that is located
as close as possible to the provided upper limit, and calls AllocatePages
subsequently to create the allocation at that exact address.
This is precisely what the EFI_ALLOCATE_MAX_ADDRESS allocation type
argument to AllocatePages() does, and considering that EFI_ALLOC_ALIGN
only exceeds EFI_PAGE_SIZE on arm64, let's use AllocatePages() directly
and implement the alignment using code that the compiler can remove if
it does not exceed EFI_PAGE_SIZE.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Link: https://lore.kernel.org/r/20200220132017.GA29262@embeddedor
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
fixes:
- The WARN_ON which was put into the MSI setaffinity callback for paranoia
reasons actually triggered via a callchain which escaped when all the
possible ways to reach that code were analyzed.
The proc/irq/$N/*affinity interfaces have a quirk which came in when
ALPHA moved to the generic interface: In case that the written affinity
mask does not contain any online CPU it calls into ALPHAs magic auto
affinity setting code.
A few years later this mechanism was also made available to x86 for no
good reasons and in a way which circumvents all sanity checks for
interrupts which cannot have their affinity set from process context on
X86 due to the way the X86 interrupt delivery works.
It would be possible to make this work properly, but there is no point
in doing so. If the interrupt is not yet started then the affinity
setting has no effect and if it is started already then it is already
assigned to an online CPU so there is no point to randomly move it to
some other CPU. Just return EINVAL as the code has done before that
change forever.
- The new MSI quirk bit in the irq domain flags turned out to be already
occupied, which escaped the author and the reviewers because the already
in use bits were 0,6,2,3,4,5 listed in that order. That bit 6 was simply
overlooked because the ordering was straight forward linear
otherwise. So the new bit ended up being a duplicate. Fix it up by
switching the oddball 6 to the obvious 1.
-----BEGIN PGP SIGNATURE-----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=jvVI
-----END PGP SIGNATURE-----
Merge tag 'irq-urgent-2020-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"Two fixes for the irq core code which are follow ups to the recent MSI
fixes:
- The WARN_ON which was put into the MSI setaffinity callback for
paranoia reasons actually triggered via a callchain which escaped
when all the possible ways to reach that code were analyzed.
The proc/irq/$N/*affinity interfaces have a quirk which came in
when ALPHA moved to the generic interface: In case that the written
affinity mask does not contain any online CPU it calls into ALPHAs
magic auto affinity setting code.
A few years later this mechanism was also made available to x86 for
no good reasons and in a way which circumvents all sanity checks
for interrupts which cannot have their affinity set from process
context on X86 due to the way the X86 interrupt delivery works.
It would be possible to make this work properly, but there is no
point in doing so. If the interrupt is not yet started then the
affinity setting has no effect and if it is started already then it
is already assigned to an online CPU so there is no point to
randomly move it to some other CPU. Just return EINVAL as the code
has done before that change forever.
- The new MSI quirk bit in the irq domain flags turned out to be
already occupied, which escaped the author and the reviewers
because the already in use bits were 0,6,2,3,4,5 listed in that
order.
That bit 6 was simply overlooked because the ordering was straight
forward linear otherwise. So the new bit ended up being a
duplicate.
Fix it up by switching the oddball 6 to the obvious 1"
* tag 'irq-urgent-2020-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq/irqdomain: Make sure all irq domain flags are distinct
genirq/proc: Reject invalid affinity masks (again)