Commit graph

121,030 commits

Author SHA1 Message Date
Linus Torvalds
b98b809c0a SCSI fixes on 20200221
Four non-core fixes.  Two are reverts of target fixes which turned out
 to have unwanted side effects, one is a revert of an RDMA fix with the
 same problem and the final one fixes an incorrect warning about memory
 allocation failures in megaraid_sas (the driver actually reduces the
 allocation size until it succeeds).
 
 Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
 -----BEGIN PGP SIGNATURE-----
 
 iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCXlBhuyYcamFtZXMuYm90
 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishdMGAQCR8Qi2
 m2kPgccUvJwVmnJ+DRJ3MRRX3Kn0IJIDoIc0IgEA6/W33+7xY8qQ0uahOyOT90tz
 g7Y2I7TxQ+dsL9pqs80=
 =JIpx
 -----END PGP SIGNATURE-----

Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI fixes from James Bottomley:
 "Four non-core fixes.

  Two are reverts of target fixes which turned out to have unwanted side
  effects, one is a revert of an RDMA fix with the same problem and the
  final one fixes an incorrect warning about memory allocation failures
  in megaraid_sas (the driver actually reduces the allocation size until
  it succeeds)"

Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: Revert "target: iscsi: Wait for all commands to finish before freeing a session"
  scsi: Revert "RDMA/isert: Fix a recently introduced regression related to logout"
  scsi: megaraid_sas: silence a warning
  scsi: Revert "target/core: Inline transport_lun_remove_cmd()"
2020-02-22 11:00:52 -08:00
Jozsef Kadlecsik
f66ee0410b netfilter: ipset: Fix "INFO: rcu detected stall in hash_xxx" reports
In the case of huge hash:* types of sets, due to the single spinlock of
a set the processing of the whole set under spinlock protection could take
too long.

There were four places where the whole hash table of the set was processed
from bucket to bucket under holding the spinlock:

- During resizing a set, the original set was locked to exclude kernel side
  add/del element operations (userspace add/del is excluded by the
  nfnetlink mutex). The original set is actually just read during the
  resize, so the spinlocking is replaced with rcu locking of regions.
  However, thus there can be parallel kernel side add/del of entries.
  In order not to loose those operations a backlog is added and replayed
  after the successful resize.
- Garbage collection of timed out entries was also protected by the spinlock.
  In order not to lock too long, region locking is introduced and a single
  region is processed in one gc go. Also, the simple timer based gc running
  is replaced with a workqueue based solution. The internal book-keeping
  (number of elements, size of extensions) is moved to region level due to
  the region locking.
- Adding elements: when the max number of the elements is reached, the gc
  was called to evict the timed out entries. The new approach is that the gc
  is called just for the matching region, assuming that if the region
  (proportionally) seems to be full, then the whole set does. We could scan
  the other regions to check every entry under rcu locking, but for huge
  sets it'd mean a slowdown at adding elements.
- Listing the set header data: when the set was defined with timeout
  support, the garbage collector was called to clean up timed out entries
  to get the correct element numbers and set size values. Now the set is
  scanned to check non-timed out entries, without actually calling the gc
  for the whole set.

Thanks to Florian Westphal for helping me to solve the SOFTIRQ-safe ->
SOFTIRQ-unsafe lock order issues during working on the patch.

Reported-by: syzbot+4b0e9d4ff3cf117837e5@syzkaller.appspotmail.com
Reported-by: syzbot+c27b8d5010f45c666ed1@syzkaller.appspotmail.com
Reported-by: syzbot+68a806795ac89df3aa1c@syzkaller.appspotmail.com
Fixes: 23c42a403a ("netfilter: ipset: Introduction of new commands and protocol version 7")
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
2020-02-22 12:00:06 +01:00
Alexei Starovoitov
8eece07c01 Two migrate disable related stubs for BPF to base the RT patches on
-----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAl5O6asTHHRnbHhAbGlu
 dXRyb25peC5kZQAKCRCmGPVMDXSYoRRwEACaqcIHhYRVZJZkVqtjYoYPnP74XCaS
 ZTbJiFMJDxcM0lt5YfjjNA7qFA8AVfOOTBdPUrjqw05LuykibpNXEBpk+n2lDEgc
 x9tZHcbylFlmhJxsnAI/S++l++I7ieqYNbNXUhUkkiN86OMxfn1rSoCo639ManxB
 WiwR+R7Q/aicUN95kLGPzvAt41K/DQ30pNpjAE5Y2z+Hl26JPti2jcMHhfFWDD23
 91mRd0ryuMSQm+ZkyiZdobfd6OzOGtYLnnxRjNJVSFz7q0s+hLUarWI+wnOxh4fD
 Jb+eahKPXSvA787/TbOvM8iNkIPX70HeBpmQIpIjbI+JEjo05amaEiYZ3cwZgs5P
 rDpFadyfi4peftbGs7G+/8RnlDJ4Towbw0X8Sl6t1RaKAfz04zsAlmW4zyNucRUD
 1pN0mxfA/OCssGahXceP0VKpqqm6hDZipFfwFheXk6zX+5YWyNGX2iP3Fh4u2vbx
 vTwxQPmsusQuehQfmR23HzNG9I67knumsJI0PiFNhnroiNklevY+cPNMRN+tj3fB
 osOSgcKVmbsKUc9jcn7yfIxSyZ1exnT2Wsri4lMHo7+kZGEguX2qnLRd1tOtVrgO
 hjawoDrhXaA9AjU80e3p9eXmRYke9oZmQdeA8X0vl9YVTsLdxlishYCNBTysHvUl
 ULgHkTY/WoxZkA==
 =4Vci
 -----END PGP SIGNATURE-----

Merge tag 'sched-for-bpf-2020-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into bpf-next

Two migrate disable related stubs for BPF to base the RT patches on
2020-02-21 18:27:47 -08:00
Geert Uytterhoeven
30332eeefe debugfs: regset32: Add Runtime PM support
Hardware registers of devices under control of power management cannot
be accessed at all times.  If such a device is suspended, register
accesses may lead to undefined behavior, like reading bogus values, or
causing exceptions or system lock-ups.

Extend struct debugfs_regset32 with an optional field to let device
drivers specify the device the registers in the set belong to.  This
allows debugfs_show_regset32() to make sure the device is resumed while
its registers are being read.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-02-22 09:25:42 +08:00
Zhangfei Gao
9e00df7156 crypto: hisilicon - register zip engine to uacce
Register qm to uacce framework for user crypto driver

Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-02-22 09:25:42 +08:00
Kenneth Lee
015d239ac0 uacce: add uacce driver
Uacce (Unified/User-space-access-intended Accelerator Framework) targets to
provide Shared Virtual Addressing (SVA) between accelerators and processes.
So accelerator can access any data structure of the main cpu.
This differs from the data sharing between cpu and io device, which share
only data content rather than address.
Since unified address, hardware and user space of process can share the
same virtual address in the communication.

Uacce create a chrdev for every registration, the queue is allocated to
the process when the chrdev is opened. Then the process can access the
hardware resource by interact with the queue file. By mmap the queue
file space to user space, the process can directly put requests to the
hardware without syscall to the kernel space.

The IOMMU core only tracks mm<->device bonds at the moment, because it
only needs to handle IOTLB invalidation and PASID table entries. However
uacce needs a finer granularity since multiple queues from the same
device can be bound to an mm. When the mm exits, all bound queues must
be stopped so that the IOMMU can safely clear the PASID table entry and
reallocate the PASID.

An intermediate struct uacce_mm links uacce devices and queues.
Note that an mm may be bound to multiple devices but an uacce_mm
structure only ever belongs to a single device, because we don't need
anything more complex (if multiple devices are bound to one mm, then
we'll create one uacce_mm for each bond).

        uacce_device --+-- uacce_mm --+-- uacce_queue
                       |              '-- uacce_queue
                       |
                       '-- uacce_mm --+-- uacce_queue
                                      +-- uacce_queue
                                      '-- uacce_queue

Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Kenneth Lee <liguozhu@hisilicon.com>
Signed-off-by: Zaibo Xu <xuzaibo@huawei.com>
Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-02-22 09:25:42 +08:00
David S. Miller
b105e8e281 Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:

====================
pull-request: bpf-next 2020-02-21

The following pull-request contains BPF updates for your *net-next* tree.

We've added 25 non-merge commits during the last 4 day(s) which contain
a total of 33 files changed, 2433 insertions(+), 161 deletions(-).

The main changes are:

1) Allow for adding TCP listen sockets into sock_map/hash so they can be used
   with reuseport BPF programs, from Jakub Sitnicki.

2) Add a new bpf_program__set_attach_target() helper for adding libbpf support
   to specify the tracepoint/function dynamically, from Eelco Chaudron.

3) Add bpf_read_branch_records() BPF helper which helps use cases like profile
   guided optimizations, from Daniel Xu.

4) Enable bpf_perf_event_read_value() in all tracing programs, from Song Liu.

5) Relax BTF mandatory check if only used for libbpf itself e.g. to process
   BTF defined maps, from Andrii Nakryiko.

6) Move BPF selftests -mcpu compilation attribute from 'probe' to 'v3' as it has
   been observed that former fails in envs with low memlock, from Yonghong Song.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-21 15:22:45 -08:00
David Disseldorp
1bf630fddd scsi: target: use an enum to track emulate_ua_intlck_ctrl
The emulate_ua_intlck_ctrl device attribute accepts values of 0, 1 or 2 via
ConfigFS, which map to unit attention interlocks control codes in the MODE
SENSE control Mode Page.  Use an enum to track these values so that it's
clear that, unlike the remaining emulate_X attributes,
emulate_ua_intlck_ctrl isn't boolean.

Link: https://marc.info/?l=target-devel&m=158227825428798
Suggested-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: David Disseldorp <ddiss@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-02-21 17:37:16 -05:00
David Disseldorp
87310c9fb5 scsi: target: convert boolean se_dev_attrib types to bool
This should harden us against configfs API regressions similar to the one
fixed by the previous commit.

Link: https://marc.info/?l=target-devel&m=158211731505174
Signed-off-by: David Disseldorp <ddiss@suse.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-02-21 17:37:14 -05:00
David Disseldorp
738981bd74 scsi: target: fix unmap_zeroes_data boolean initialisation
The LIO unmap_zeroes_data device attribute is mapped to the LBPRZ flag in
the READ CAPACITY(16) and Thin Provisioning VPD INQUIRY responses.

The unmap_zeroes_data attribute is exposed via configfs, where any write
value is correctly validated via strtobool(). However, when initialised via
target_configure_unmap_from_queue() it takes the value of the device's
max_write_zeroes_sectors queue limit, which is non-boolean.

A non-boolean value can be read from configfs, but attempting to write the
same value back results in -EINVAL, causing problems for configuration
utilities such as targetcli.

Link: https://marc.info/?l=target-devel&m=158213354011309
Fixes: 2237498f0b ("target/iblock: Convert WRITE_SAME to blkdev_issue_zeroout")
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: David Disseldorp <ddiss@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-02-21 17:37:13 -05:00
David S. Miller
e65ee2fb54 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Conflict resolution of ice_virtchnl_pf.c based upon work by
Stephen Rothwell.

Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-21 13:39:34 -08:00
Jakub Sitnicki
035ff358f2 net: Generate reuseport group ID on group creation
Commit 736b46027e ("net: Add ID (if needed) to sock_reuseport and expose
reuseport_lock") has introduced lazy generation of reuseport group IDs that
survive group resize.

By comparing the identifier we check if BPF reuseport program is not trying
to select a socket from a BPF map that belongs to a different reuseport
group than the one the packet is for.

Because SOCKARRAY used to be the only BPF map type that can be used with
reuseport BPF, it was possible to delay the generation of reuseport group
ID until a socket from the group was inserted into BPF map for the first
time.

Now that SOCK{MAP,HASH} can be used with reuseport BPF we have two options,
either generate the reuseport ID on map update, like SOCKARRAY does, or
allocate an ID from the start when reuseport group gets created.

This patch takes the latter approach to keep sockmap free of calls into
reuseport code. This streamlines the reuseport_id access as its lifetime
now matches the longevity of reuseport object.

The cost of this simplification, however, is that we allocate reuseport IDs
for all SO_REUSEPORT users. Even those that don't use SOCKARRAY in their
setups. With the way identifiers are currently generated, we can have at
most S32_MAX reuseport groups, which hopefully is sufficient. If we ever
get close to the limit, we can switch an u64 counter like sk_cookie.

Another change is that we now always call into SOCKARRAY logic to unlink
the socket from the map when unhashing or closing the socket. Previously we
did it only when at least one socket from the group was in a BPF map.

It is worth noting that this doesn't conflict with sockmap tear-down in
case a socket is in a SOCK{MAP,HASH} and belongs to a reuseport
group. sockmap tear-down happens first:

  prot->unhash
  `- tcp_bpf_unhash
     |- tcp_bpf_remove
     |  `- while (sk_psock_link_pop(psock))
     |     `- sk_psock_unlink
     |        `- sock_map_delete_from_link
     |           `- __sock_map_delete
     |              `- sock_map_unref
     |                 `- sk_psock_put
     |                    `- sk_psock_drop
     |                       `- rcu_assign_sk_user_data(sk, NULL)
     `- inet_unhash
        `- reuseport_detach_sock
           `- bpf_sk_reuseport_detach
              `- WRITE_ONCE(sk->sk_user_data, NULL)

Suggested-by: Martin Lau <kafai@fb.com>
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200218171023.844439-10-jakub@cloudflare.com
2020-02-21 22:29:45 +01:00
Jakub Sitnicki
e80251555f tcp_bpf: Don't let child socket inherit parent protocol ops on copy
Prepare for cloning listening sockets that have their protocol callbacks
overridden by sk_msg. Child sockets must not inherit parent callbacks that
access state stored in sk_user_data owned by the parent.

Restore the child socket protocol callbacks before it gets hashed and any
of the callbacks can get invoked.

Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200218171023.844439-4-jakub@cloudflare.com
2020-02-21 22:29:45 +01:00
Jakub Sitnicki
f1ff5ce2cd net, sk_msg: Clear sk_user_data pointer on clone if tagged
sk_user_data can hold a pointer to an object that is not intended to be
shared between the parent socket and the child that gets a pointer copy on
clone. This is the case when sk_user_data points at reference-counted
object, like struct sk_psock.

One way to resolve it is to tag the pointer with a no-copy flag by
repurposing its lowest bit. Based on the bit-flag value we clear the child
sk_user_data pointer after cloning the parent socket.

The no-copy flag is stored in the pointer itself as opposed to externally,
say in socket flags, to guarantee that the pointer and the flag are copied
from parent to child socket in an atomic fashion. Parent socket state is
subject to change while copying, we don't hold any locks at that time.

This approach relies on an assumption that sk_user_data holds a pointer to
an object aligned at least 2 bytes. A manual audit of existing users of
rcu_dereference_sk_user_data helper confirms our assumption.

Also, an RCU-protected sk_user_data is not likely to hold a pointer to a
char value or a pathological case of "struct { char c; }". To be safe, warn
when the flag-bit is set when setting sk_user_data to catch any future
misuses.

It is worth considering why clearing sk_user_data unconditionally is not an
option. There exist users, DRBD, NVMe, and Xen drivers being among them,
that rely on the pointer being copied when cloning the listening socket.

Potentially we could distinguish these users by checking if the listening
socket has been created in kernel-space via sock_create_kern, and hence has
sk_kern_sock flag set. However, this is not the case for NVMe and Xen
drivers, which create sockets without marking them as belonging to the
kernel.

Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200218171023.844439-3-jakub@cloudflare.com
2020-02-21 22:29:45 +01:00
Jakub Sitnicki
b8e202d1d1 net, sk_msg: Annotate lockless access to sk_prot on clone
sk_msg and ULP frameworks override protocol callbacks pointer in
sk->sk_prot, while tcp accesses it locklessly when cloning the listening
socket, that is with neither sk_lock nor sk_callback_lock held.

Once we enable use of listening sockets with sockmap (and hence sk_msg),
there will be shared access to sk->sk_prot if socket is getting cloned
while being inserted/deleted to/from the sockmap from another CPU:

Read side:

tcp_v4_rcv
  sk = __inet_lookup_skb(...)
  tcp_check_req(sk)
    inet_csk(sk)->icsk_af_ops->syn_recv_sock
      tcp_v4_syn_recv_sock
        tcp_create_openreq_child
          inet_csk_clone_lock
            sk_clone_lock
              READ_ONCE(sk->sk_prot)

Write side:

sock_map_ops->map_update_elem
  sock_map_update_elem
    sock_map_update_common
      sock_map_link_no_progs
        tcp_bpf_init
          tcp_bpf_update_sk_prot
            sk_psock_update_proto
              WRITE_ONCE(sk->sk_prot, ops)

sock_map_ops->map_delete_elem
  sock_map_delete_elem
    __sock_map_delete
     sock_map_unref
       sk_psock_put
         sk_psock_drop
           sk_psock_restore_proto
             tcp_update_ulp
               WRITE_ONCE(sk->sk_prot, proto)

Mark the shared access with READ_ONCE/WRITE_ONCE annotations.

Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200218171023.844439-2-jakub@cloudflare.com
2020-02-21 22:29:45 +01:00
Linus Torvalds
ef11f1b76a TTY/Serial driver fixes for 5.6-rc3
Here are a number of small tty and serial driver fixes for 5.6-rc3 that
 resolve a bunch of reported issues.
 
 They are:
   - vt selection and ioctl fixes
   - serdev bugfix
   - atmel serial driver fixes
   - qcom serial driver fixes
   - other minor serial driver fixes
 
 All of these have been in linux-next for a while with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXk+/Dw8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ymGXgCfcYfb71LB7KbExN4GFETm93pca+QAoI+ihzFw
 zQJFJAe/dmiP2TifAdY7
 =oeU9
 -----END PGP SIGNATURE-----

Merge tag 'tty-5.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty/serial driver fixes from Greg KH:
 "Here are a number of small tty and serial driver fixes for 5.6-rc3
  that resolve a bunch of reported issues.

  They are:
   - vt selection and ioctl fixes
   - serdev bugfix
   - atmel serial driver fixes
   - qcom serial driver fixes
   - other minor serial driver fixes

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'tty-5.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  vt: selection, close sel_buffer race
  vt: selection, handle pending signals in paste_selection
  serial: cpm_uart: call cpm_muram_init before registering console
  tty: serial: qcom_geni_serial: Fix RX cancel command failure
  serial: 8250: Check UPF_IRQ_SHARED in advance
  tty: serial: imx: setup the correct sg entry for tx dma
  vt: vt_ioctl: fix race in VT_RESIZEX
  vt: fix scrollback flushing on background consoles
  tty: serial: tegra: Handle RX transfer in PIO mode if DMA wasn't started
  tty/serial: atmel: manage shutdown in case of RS485 or ISO7816 mode
  serdev: ttyport: restore client ops on deregistration
  serial: ar933x_uart: set UART_CS_{RX,TX}_READY_ORIDE
2020-02-21 12:48:29 -08:00
Linus Torvalds
cee853e825 USB fixes for 5.6-rc3
Here are a number of small USB driver fixes for 5.6-rc3.
 
 Included in here are:
   - MAINTAINER file updates
   - USB gadget driver fixes
   - usb core quirk additions and fixes for regressions
   - xhci driver fixes
   - usb serial driver id additions and fixes
   - thunderbolt bugfix
 
 Thunderbolt patches come in through here now that USB4 is really
 thunderbolt.
 
 All of these have been in linux-next for a while with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXk+/zw8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ynQywCeOlklNLcTKw/JkbsbtMlY/yTl4W8AoLLoEgSy
 GyUV8E67wZNdXLKH+n14
 =o97t
 -----END PGP SIGNATURE-----

Merge tag 'usb-5.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB/Thunderbolt fixes from Greg KH:
 "Here are a number of small USB driver fixes for 5.6-rc3.

  Included in here are:
  - MAINTAINER file updates
  - USB gadget driver fixes
  - usb core quirk additions and fixes for regressions
  - xhci driver fixes
  - usb serial driver id additions and fixes
  - thunderbolt bugfix

  Thunderbolt patches come in through here now that USB4 is really
  thunderbolt.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-5.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (34 commits)
  USB: misc: iowarrior: add support for the 100 device
  thunderbolt: Prevent crash if non-active NVMem file is read
  usb: gadget: udc-xilinx: Fix xudc_stop() kernel-doc format
  USB: misc: iowarrior: add support for the 28 and 28L devices
  USB: misc: iowarrior: add support for 2 OEMed devices
  USB: Fix novation SourceControl XL after suspend
  xhci: Fix memory leak when caching protocol extended capability PSI tables - take 2
  Revert "xhci: Fix memory leak when caching protocol extended capability PSI tables"
  MAINTAINERS: Sort entries in database for THUNDERBOLT
  usb: dwc3: debug: fix string position formatting mixup with ret and len
  usb: gadget: serial: fix Tx stall after buffer overflow
  usb: gadget: ffs: ffs_aio_cancel(): Save/restore IRQ flags
  usb: dwc2: Fix SET/CLEAR_FEATURE and GET_STATUS flows
  usb: dwc2: Fix in ISOC request length checking
  usb: gadget: composite: Support more than 500mA MaxPower
  usb: gadget: composite: Fix bMaxPower for SuperSpeedPlus
  usb: gadget: u_audio: Fix high-speed max packet size
  usb: dwc3: gadget: Check for IOC/LST bit in TRB->ctrl fields
  USB: core: clean up endpoint-descriptor parsing
  USB: quirks: blacklist duplicate ep on Sound Devices USBPre2
  ...
2020-02-21 12:44:53 -08:00
Linus Torvalds
3dc55dba67 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from David Miller:

 1) Limit xt_hashlimit hash table size to avoid OOM or hung tasks, from
    Cong Wang.

 2) Fix deadlock in xsk by publishing global consumer pointers when NAPI
    is finished, from Magnus Karlsson.

 3) Set table field properly to RT_TABLE_COMPAT when necessary, from
    Jethro Beekman.

 4) NLA_STRING attributes are not necessary NULL terminated, deal wiht
    that in IFLA_ALT_IFNAME. From Eric Dumazet.

 5) Fix checksum handling in atlantic driver, from Dmitry Bezrukov.

 6) Handle mtu==0 devices properly in wireguard, from Jason A.
    Donenfeld.

 7) Fix several lockdep warnings in bonding, from Taehee Yoo.

 8) Fix cls_flower port blocking, from Jason Baron.

 9) Sanitize internal map names in libbpf, from Toke Høiland-Jørgensen.

10) Fix RDMA race in qede driver, from Michal Kalderon.

11) Fix several false lockdep warnings by adding conditions to
    list_for_each_entry_rcu(), from Madhuparna Bhowmik.

12) Fix sleep in atomic in mlx5 driver, from Huy Nguyen.

13) Fix potential deadlock in bpf_map_do_batch(), from Yonghong Song.

14) Hey, variables declared in switch statement before any case
    statements are not initialized. I learn something every day. Get
    rids of this stuff in several parts of the networking, from Kees
    Cook.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (99 commits)
  bnxt_en: Issue PCIe FLR in kdump kernel to cleanup pending DMAs.
  bnxt_en: Improve device shutdown method.
  net: netlink: cap max groups which will be considered in netlink_bind()
  net: thunderx: workaround BGX TX Underflow issue
  ionic: fix fw_status read
  net: disable BRIDGE_NETFILTER by default
  net: macb: Properly handle phylink on at91rm9200
  s390/qeth: fix off-by-one in RX copybreak check
  s390/qeth: don't warn for napi with 0 budget
  s390/qeth: vnicc Fix EOPNOTSUPP precedence
  openvswitch: Distribute switch variables for initialization
  net: ip6_gre: Distribute switch variables for initialization
  net: core: Distribute switch variables for initialization
  udp: rehash on disconnect
  net/tls: Fix to avoid gettig invalid tls record
  bpf: Fix a potential deadlock with bpf_map_do_batch
  bpf: Do not grab the bucket spinlock by default on htab batch ops
  ice: Wait for VF to be reset/ready before configuration
  ice: Don't tell the OS that link is going down
  ice: Don't reject odd values of usecs set by user
  ...
2020-02-21 11:59:51 -08:00
Linus Torvalds
b0dd1eb220 Merge branch 'akpm' (patches from Andrew)
Merge misc fixes from Andrew Morton:

 - A few y2038 fixes which missed the merge window while dependencies
   in NFS were being sorted out.

 - A bunch of fixes. Some minor, some not.

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  MAINTAINERS: use tabs for SAFESETID
  lib/stackdepot.c: fix global out-of-bounds in stack_slabs
  mm/sparsemem: pfn_to_page is not valid yet on SPARSEMEM
  mm/vmscan.c: don't round up scan size for online memory cgroup
  lib/string.c: update match_string() doc-strings with correct behavior
  mm/memcontrol.c: lost css_put in memcg_expand_shrinker_maps()
  mm/swapfile.c: fix a comment in sys_swapon()
  scripts/get_maintainer.pl: deprioritize old Fixes: addresses
  get_maintainer: remove uses of P: for maintainer name
  selftests/vm: add missed tests in run_vmtests
  include/uapi/linux/swab.h: fix userspace breakage, use __BITS_PER_LONG for swap
  Revert "ipc,sem: remove uneeded sem_undo_list lock usage in exit_sem()"
  y2038: hide timeval/timespec/itimerval/itimerspec types
  y2038: remove unused time32 interfaces
  y2038: remove ktime to/from timespec/timeval conversion
2020-02-21 11:40:10 -08:00
Christian Borntraeger
467d12f5c7 include/uapi/linux/swab.h: fix userspace breakage, use __BITS_PER_LONG for swap
QEMU has a funny new build error message when I use the upstream kernel
headers:

      CC      block/file-posix.o
    In file included from /home/cborntra/REPOS/qemu/include/qemu/timer.h:4,
                     from /home/cborntra/REPOS/qemu/include/qemu/timed-average.h:29,
                     from /home/cborntra/REPOS/qemu/include/block/accounting.h:28,
                     from /home/cborntra/REPOS/qemu/include/block/block_int.h:27,
                     from /home/cborntra/REPOS/qemu/block/file-posix.c:30:
    /usr/include/linux/swab.h: In function `__swab':
    /home/cborntra/REPOS/qemu/include/qemu/bitops.h:20:34: error: "sizeof" is not defined, evaluates to 0 [-Werror=undef]
       20 | #define BITS_PER_LONG           (sizeof (unsigned long) * BITS_PER_BYTE)
          |                                  ^~~~~~
    /home/cborntra/REPOS/qemu/include/qemu/bitops.h:20:41: error: missing binary operator before token "("
       20 | #define BITS_PER_LONG           (sizeof (unsigned long) * BITS_PER_BYTE)
          |                                         ^
    cc1: all warnings being treated as errors
    make: *** [/home/cborntra/REPOS/qemu/rules.mak:69: block/file-posix.o] Error 1
    rm tests/qemu-iotests/socket_scm_helper.o

This was triggered by commit d5767057c9 ("uapi: rename ext2_swab() to
swab() and share globally in swab.h").  That patch is doing

  #include <asm/bitsperlong.h>

but it uses BITS_PER_LONG.

The kernel file asm/bitsperlong.h provide only __BITS_PER_LONG.

Let us use the __ variant in swap.h

Link: http://lkml.kernel.org/r/20200213142147.17604-1-borntraeger@de.ibm.com
Fixes: d5767057c9 ("uapi: rename ext2_swab() to swab() and share globally in swab.h")
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Yury Norov <yury.norov@gmail.com>
Cc: Allison Randal <allison@lohutok.net>
Cc: Joe Perches <joe@perches.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: William Breathitt Gray <vilhelm.gray@gmail.com>
Cc: Torsten Hilbrich <torsten.hilbrich@secunet.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-02-21 11:22:15 -08:00
Arnd Bergmann
c766d1472c y2038: hide timeval/timespec/itimerval/itimerspec types
There are no in-kernel users remaining, but there may still be users that
include linux/time.h instead of sys/time.h from user space, so leave the
types available to user space while hiding them from kernel space.

Only the __kernel_old_* versions of these types remain now.

Link: http://lkml.kernel.org/r/20200110154232.4104492-4-arnd@arndb.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Deepa Dinamani <deepa.kernel@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-02-21 11:22:15 -08:00
Arnd Bergmann
412c53a680 y2038: remove unused time32 interfaces
No users remain, so kill these off before we grow new ones.

Link: http://lkml.kernel.org/r/20200110154232.4104492-3-arnd@arndb.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Deepa Dinamani <deepa.kernel@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-02-21 11:22:15 -08:00
Arnd Bergmann
595abbaff5 y2038: remove ktime to/from timespec/timeval conversion
A couple of helpers are now obsolete and can be removed, so drivers can no
longer start using them and instead use y2038-safe interfaces.

Link: http://lkml.kernel.org/r/20200110154232.4104492-2-arnd@arndb.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Deepa Dinamani <deepa.kernel@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-02-21 11:22:15 -08:00
Emmanuel Grumbach
7bb106eb68 cfg80211: remove support for adjacent channel compensation
The only driver that used that was iwlwifi and it removed
support for this. Remove the feature here as well.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://lore.kernel.org/r/20200214232336.a530de38e511.I393bc395f6037c8cca6421ed550e3072dc248aed@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-02-21 20:00:39 +01:00
Rafael J. Wysocki
63fb962342 ACPI: PM: s2idle: Check fixed wakeup events in acpi_s2idle_wake()
Commit fdde0ff859 ("ACPI: PM: s2idle: Prevent spurious SCIs from
waking up the system") overlooked the fact that fixed events can wake
up the system too and broke RTC wakeup from suspend-to-idle as a
result.

Fix this issue by checking the fixed events in acpi_s2idle_wake() in
addition to checking wakeup GPEs and break out of the suspend-to-idle
loop if the status bits of any enabled fixed events are set then.

Fixes: fdde0ff859 ("ACPI: PM: s2idle: Prevent spurious SCIs from waking up the system")
Reported-and-tested-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: 5.4+ <stable@vger.kernel.org> # 5.4+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-02-21 10:01:25 -08:00
YueHaibing
3e27a33932 security: remove duplicated include from security.h
Remove duplicated include.

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: James Morris <jmorris@namei.org>
2020-02-21 08:53:48 -08:00
Jerome Brunet
bd56e593da
ASoC: meson: g12a: add toacodec dt-binding documentation
Add the DT bindings and documentation of the internal audio DAC glue found
on Amlogic g12a and sm1 SoC families

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20200221153607.1585499-2-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2020-02-21 16:39:04 +00:00
Zenghui Yu
2546287c5f genirq/irqdomain: Make sure all irq domain flags are distinct
This was noticed when printing debugfs for MSIs on my ARM64 server.  The
new dstate IRQD_MSI_NOMASK_QUIRK came out surprisingly while it should only
be the x86 stuff for the time being...

The new MSI quirk flag uses the same bit as IRQ_DOMAIN_NAME_ALLOCATED which
is oddly defined as bit 6 for no good reason.

Switch it to the non used bit 1.

Fixes: 6f1a4891a5 ("x86/apic/msi: Plug non-maskable MSI affinity race")
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20200221020725.2038-1-yuzenghui@huawei.com
2020-02-21 11:29:15 +01:00
Jiri Slaby
dce05aa6ee vt: selection, introduce vc_is_sel
Avoid global variables (namely sel_cons) by introducing vc_is_sel. It
checks whether the parameter is the current selection console. This will
help putting sel_cons to a struct later.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20200219073951.16151-1-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-21 10:31:18 +01:00
Alexandru Gagniuc
202853595e PCI: pciehp: Disable in-band presence detect when possible
The presence detect state (PDS) is normally a logical OR of in-band and
out-of-band (OOB) presence detect.  As of PCIe 4.0, there is the option to
disable in-band presence so that the PDS bit always reflects the state of
the out-of-band presence.

The recommendation of the PCIe spec is to disable in-band presence whenever
supported (PCIe r5.0, appendix I implementation note):

  Due to architectural issues, the in-band (Physical-Layer-based) portion
  of the PD mechanism is deprecated for use with async hot-plug. One issue
  is that in-band PD as architected does not detect adapter removal during
  certain LTSSM states, notably the L1 and Disabled States.  Another issue
  is that when both in-band and OOB PD are being used together, the
  Presence Detect State bit and its associated interrupt mechanism always
  reflect the logical OR of the inband and OOB PD states, and with some
  hot-plug hardware configurations, it is important for software to detect
  and respond to in-band and OOB PD events independently.  If OOB PD is
  being used and the associated DSP supports In-Band PD Disable, it is
  recommended that the In-Band PD Disable bit be Set, and the Presence
  Detect State bit and its associated interrupt mechanism be used
  exclusively for OOB PD.  As a substitute for in-band PD with async
  hot-plug, the reference model uses either the DPC or the DLL Link Active
  mechanism.

Link: https://lore.kernel.org/r/20191025190047.38130-2-stuart.w.hayes@gmail.com
[bhelgaas: move PCI_EXP_SLTCAP2 read earlier & print PCI_EXP_SLTCAP2_IBPD
value (suggested by Lukas)]
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
2020-02-20 22:44:30 -06:00
Dan Williams
9ffc1d19fc mm/memremap_pages: Introduce memremap_compat_align()
The "sub-section memory hotplug" facility allows memremap_pages() users
like libnvdimm to compensate for hardware platforms like x86 that have a
section size larger than their hardware memory mapping granularity.  The
compensation that sub-section support affords is being tolerant of
physical memory resources shifting by units smaller (64MiB on x86) than
the memory-hotplug section size (128 MiB). Where the platform
physical-memory mapping granularity is limited by the number and
capability of address-decode-registers in the memory controller.

While the sub-section support allows memremap_pages() to operate on
sub-section (2MiB) granularity, the Power architecture may still
require 16MiB alignment on "!radix_enabled()" platforms.

In order for libnvdimm to be able to detect and manage this per-arch
limitation, introduce memremap_compat_align() as a common minimum
alignment across all driver-facing memory-mapping interfaces, and let
Power override it to 16MiB in the "!radix_enabled()" case.

The assumption / requirement for 16MiB to be a viable
memremap_compat_align() value is that Power does not have platforms
where its equivalent of address-decode-registers never hardware remaps a
persistent memory resource on smaller than 16MiB boundaries. Note that I
tried my best to not add a new Kconfig symbol, but header include
entanglements defeated the #ifndef memremap_compat_align design pattern
and the need to export it defeats the __weak design pattern for arch
overrides.

Based on an initial patch by Aneesh.

Link: http://lore.kernel.org/r/CAPcyv4gBGNP95APYaBcsocEa50tQj9b5h__83vgngjq3ouGX_Q@mail.gmail.com
Reported-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Reported-by: Jeff Moyer <jmoyer@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2020-02-20 16:58:55 -08:00
Paul E. McKenney
59ee0326cc rcutorture: Suppress forward-progress complaints during early boot
Some larger systems can take in excess of 50 seconds to complete their
early boot initcalls prior to spawing init.  This does not in any way
help the forward-progress judgments of built-in rcutorture (when
rcutorture is built as a module, the insmod or modprobe command normally
cannot happen until some time after boot completes).  This commit
therefore suppresses such complaints until about the time that init
is spawned.

This also includes a fix to a stupid error located by kbuild test robot.

[ paulmck: Apply kbuild test robot feedback. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
[ paulmck: Fix to nohz_full slow-expediting recovery logic, per bpetkov. ]
[ paulmck: Restrict splat to CONFIG_PREEMPT_RT=y kernels and simplify. ]
Tested-by: Borislav Petkov <bp@alien8.de>
2020-02-20 16:03:30 -08:00
Uladzislau Rezki (Sony)
613707929b rcu: Add a trace event for kfree_rcu() use of kfree_bulk()
The event is given three parameters, first one is the name
of RCU flavour, second one is the number of elements in array
for free and last one is an address of the array holding
pointers to be freed by the kfree_bulk() function.

To enable the trace event your kernel has to be build with
CONFIG_RCU_TRACE=y, after that it is possible to track the
events using ftrace subsystem.

Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2020-02-20 15:58:51 -08:00
Amol Grover
4dfd5cd83d rculist: Add brackets around cond argument in __list_check_rcu macro
Passing a complex lockdep condition to __list_check_rcu results
in false positive lockdep splat due to incorrect expression
evaluation.

For example, a lockdep check condition `cond1 || cond2` is
evaluated as `!cond1 || cond2 && !rcu_read_lock_any_held()`
which, according to operator precedence, evaluates to
`!cond1 || (cond2 && !rcu_read_lock_any_held())`.
This would result in a lockdep splat when cond1 is false
and cond2 is true which is logically incorrect.

Signed-off-by: Amol Grover <frextrite@gmail.com>
Acked-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2020-02-20 15:58:23 -08:00
Eric Dumazet
90c018942c timer: Use hlist_unhashed_lockless() in timer_pending()
The timer_pending() function is mostly used in lockless contexts, so
Without proper annotations, KCSAN might detect a data-race [1].

Using hlist_unhashed_lockless() instead of hand-coding it seems
appropriate (as suggested by Paul E. McKenney).

[1]

BUG: KCSAN: data-race in del_timer / detach_if_pending

write to 0xffff88808697d870 of 8 bytes by task 10 on cpu 0:
 __hlist_del include/linux/list.h:764 [inline]
 detach_timer kernel/time/timer.c:815 [inline]
 detach_if_pending+0xcd/0x2d0 kernel/time/timer.c:832
 try_to_del_timer_sync+0x60/0xb0 kernel/time/timer.c:1226
 del_timer_sync+0x6b/0xa0 kernel/time/timer.c:1365
 schedule_timeout+0x2d2/0x6e0 kernel/time/timer.c:1896
 rcu_gp_fqs_loop+0x37c/0x580 kernel/rcu/tree.c:1639
 rcu_gp_kthread+0x143/0x230 kernel/rcu/tree.c:1799
 kthread+0x1d4/0x200 drivers/block/aoe/aoecmd.c:1253
 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:352

read to 0xffff88808697d870 of 8 bytes by task 12060 on cpu 1:
 del_timer+0x3b/0xb0 kernel/time/timer.c:1198
 sk_stop_timer+0x25/0x60 net/core/sock.c:2845
 inet_csk_clear_xmit_timers+0x69/0xa0 net/ipv4/inet_connection_sock.c:523
 tcp_clear_xmit_timers include/net/tcp.h:606 [inline]
 tcp_v4_destroy_sock+0xa3/0x3f0 net/ipv4/tcp_ipv4.c:2096
 inet_csk_destroy_sock+0xf4/0x250 net/ipv4/inet_connection_sock.c:836
 tcp_close+0x6f3/0x970 net/ipv4/tcp.c:2497
 inet_release+0x86/0x100 net/ipv4/af_inet.c:427
 __sock_release+0x85/0x160 net/socket.c:590
 sock_close+0x24/0x30 net/socket.c:1268
 __fput+0x1e1/0x520 fs/file_table.c:280
 ____fput+0x1f/0x30 fs/file_table.c:313
 task_work_run+0xf6/0x130 kernel/task_work.c:113
 tracehook_notify_resume include/linux/tracehook.h:188 [inline]
 exit_to_usermode_loop+0x2b4/0x2c0 arch/x86/entry/common.c:163

Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 12060 Comm: syz-executor.5 Not tainted 5.4.0-rc3+ #0
Hardware name: Google Google Compute Engine/Google Compute Engine,

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
[ paulmck: Pulled in Eric's later amendments. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2020-02-20 15:58:22 -08:00
Masami Hiramatsu
85c46b78da bootconfig: Add bootconfig magic word for indicating bootconfig explicitly
Add bootconfig magic word to the end of bootconfig on initrd
image for indicating explicitly the bootconfig is there.
Also tools/bootconfig treats wrong size or wrong checksum or
parse error as an error, because if there is a bootconfig magic
word, there must be a bootconfig.

The bootconfig magic word is "#BOOTCONFIG\n", 12 bytes word.
Thus the block image of the initrd file with bootconfig is
as follows.

[Initrd][bootconfig][size][csum][#BOOTCONFIG\n]

Link: http://lkml.kernel.org/r/158220112263.26565.3944814205960612841.stgit@devnote2

Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-02-20 17:52:34 -05:00
Thomas Gleixner
4e139c7711 sched: Provide cant_migrate()
Some code pathes rely on preempt_disable() to prevent migration on a non RT
enabled kernel. These preempt_disable/enable() pairs are substituted by
migrate_disable/enable() pairs or other forms of RT specific protection. On
RT these protections prevent migration but not preemption. Obviously a
cant_sleep() check in such a section will trigger on RT because preemption
is not disabled.

Provide a cant_migrate() macro which maps to cant_sleep() on a non RT
kernel and an empty placeholder for RT for now. The placeholder will be
changed to a proper debug check along with the RT specific migration
protection mechanism.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200214161503.070487511@linutronix.de
2020-02-20 21:17:24 +01:00
Thomas Gleixner
66630058e5 sched/rt: Provide migrate_disable/enable() inlines
Code which solely needs to prevent migration of a task uses
preempt_disable()/enable() pairs. This is the only reliable way to do so
as setting the task affinity to a single CPU can be undone by a
setaffinity operation from a different task/process.

RT provides a seperate migrate_disable/enable() mechanism which does not
disable preemption to achieve the semantic requirements of a (almost) fully
preemptible kernel.

As it is unclear from looking at a given code path whether the intention is
to disable preemption or migration, introduce migrate_disable/enable()
inline functions which can be used to annotate code which merely needs to
disable migration. Map them to preempt_disable/enable() for now. The RT
substitution will be provided later.

Code which is annotated that way documents that it has no requirement to
protect against reentrancy of a preempting task. Either this is not
required at all or the call sites are already serialized by other means.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ben Segall <bsegall@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/r/878slclv1u.fsf@nanos.tec.linutronix.de
2020-02-20 21:17:24 +01:00
Dave Airlie
1b245ec5b6 drm-misc-next for 5.7:
UAPI Changes:
   - lima: Add support for heap buffers
 
 Cross-subsystem Changes:
 
 Core Changes:
   - Implement mode_config mode_valid for memory constrained drivers
   - Bus format negociation between bridges
   - Consolidate fake vblank events for drivers without vblank interrupts
   - drm/bufs: dma_alloc related cleanups
   - drm/dp_mst: Various fixes
   - drm/print: New drm_device based print helpers
   - Thomas is a drm-misc maintainer now!
 
 Driver Changes:
   - DPMS cleanups for atomic drivers
   - Removal of owner field in SPI tinydrm drivers
   - Removal of explicit dependency on DT for tinydrm drivers
   - Conversion to YAML schemas for DT bindings
   - tidss: New driver
   - virtio: various reworks and fixes
   - Our usual dozen or so new panels or bridges
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXkEjOgAKCRDj7w1vZxhR
 xeaDAQD+1MludG4RmfQhATe4jTsPC1r2x63OF2CA0ChMGHXJyQEA8qqQ+8y1Cd/u
 PZ3PpcTl4qYYHgzJ6FwW7kDPTvlaZQE=
 =IJAt
 -----END PGP SIGNATURE-----

Merge tag 'drm-misc-next-2020-02-10' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next for 5.7:

UAPI Changes:
  - lima: Add support for heap buffers

Cross-subsystem Changes:

Core Changes:
  - Implement mode_config mode_valid for memory constrained drivers
  - Bus format negociation between bridges
  - Consolidate fake vblank events for drivers without vblank interrupts
  - drm/bufs: dma_alloc related cleanups
  - drm/dp_mst: Various fixes
  - drm/print: New drm_device based print helpers
  - Thomas is a drm-misc maintainer now!

Driver Changes:
  - DPMS cleanups for atomic drivers
  - Removal of owner field in SPI tinydrm drivers
  - Removal of explicit dependency on DT for tinydrm drivers
  - Conversion to YAML schemas for DT bindings
  - tidss: New driver
  - virtio: various reworks and fixes
  - Our usual dozen or so new panels or bridges

Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200210093421.xu4sofldm6wm6xq6@gilmour.lan
2020-02-21 05:44:40 +10:00
Ilias Apalodimas
458de8a97f net: page_pool: API cleanup and comments
Functions starting with __ usually indicate those which are exported,
but should not be called directly. Update some of those declared in the
API and make it more readable.

page_pool_unmap_page() and page_pool_release_page() were doing
exactly the same thing calling __page_pool_clean_page().  Let's
rename __page_pool_clean_page() to page_pool_release_page() and
export it in order to show up on perf logs and get rid of
page_pool_unmap_page().

Finally rename __page_pool_put_page() to page_pool_put_page() since we
can now directly call it from drivers and rename the existing
page_pool_put_page() to page_pool_put_full_page() since they do the same
thing but the latter is trying to sync the full DMA area.

This patch also updates netsec, mvneta and stmmac drivers which use
those functions.

Suggested-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-20 10:09:25 -08:00
Gustavo A. R. Silva
5b361328ca RDMA: Replace zero-length array with flexible-array member
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:

struct foo {
        int stuff;
        struct boo array[];
};

By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.

Also, notice that, dynamic memory allocations won't be affected by
this change:

"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]

This issue was found with the help of Coccinelle.

[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")

Link: https://lore.kernel.org/r/20200213010425.GA13068@embeddedor.com
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> # added a few more
2020-02-20 13:33:51 -04:00
Pierre-Louis Bossart
63d68382f5
ASoC: soc-core: fix for_rtd_codec_dai_rollback() macro
The use of parentheses to protect the argument is fine for (i)++ but
not for (--i).

Fixes: 83f94a2e29 ("ASoC: soc-core: add snd_soc_close_delayed_work()")
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20200219222130.29933-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2020-02-20 12:21:42 +00:00
Paul Blakey
11b717d615 net/mlx5: E-Switch, Get reg_c0 value on CQE
On RX side create a restore table in OFFLOADS namespace.
This table will match on all values for reg_c0 we will use,
and set it to the flow_tag. This flow tag can then be read on the CQE.

As there is no copy action from reg c0 to flow tag, instead we have to
set the flow tag explictily. We add an API so callers can add all the used
reg_c0 values (tags) and for each of those we add a restore rule.

This will be used in a following patch to save the miss chain mapping
tag on reg_c0 and from it restore the tc chain on the skb.

Signed-off-by: Paul Blakey <paulb@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Oz Shlomo <ozsh@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-02-19 17:49:48 -08:00
Paul Blakey
0f0d3827c0 net/mlx5: E-Switch, Move source port on reg_c0 to the upper 16 bits
Multi chain support requires the miss path to continue the processing
from the last chain id, and for that we need to save the chain
miss tag (a mapping for 32bit chain id) on reg_c0 which will
come in a next patch.

Currently reg_c0 is exclusively used to store the source port
metadata, giving it 32bit, it is created from 16bits of vcha_id,
and 16bits of vport number.

We will move this source port metadata to upper 16bits, and leave the
lower bits for the chain miss tag. We compress the reg_c0 source port
metadata to 16bits by taking 8 bits from vhca_id, and 8bits from
the vport number.

Since we compress the vport number to 8bits statically, and leave two
top ids for special PF/ECPF numbers, we will only support a max of 254
vports with this strategy.

Signed-off-by: Paul Blakey <paulb@mellanox.com>
Reviewed-by: Oz Shlomo <ozsh@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-02-19 17:49:48 -08:00
Paul Blakey
7d17c544cd net: sched: Pass ingress block to tcf_classify_ingress
On ingress and cls_act qdiscs init, save the block on ingress
mini_Qdisc and and pass it on to ingress classification, so it
can be used for the looking up a specified chain index.

Co-developed-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-02-19 17:49:48 -08:00
Paul Blakey
9410c9409d net: sched: Introduce ingress classification function
TC multi chain configuration can cause offloaded tc chains to miss in
hardware after jumping to some chain. In such cases the software should
continue from the chain that missed in hardware, as the hardware may
have manipulated the packet and updated some counters.

Currently a single tcf classification function serves both ingress and
egress. However, multi chain miss processing (get tc skb extension on
hw miss, set tc skb extension on tc miss) should happen only on
ingress.

Refactor the code to use ingress classification function, and move setting
the tc skb extension from general classification to it, as a prestep
for supporting the hw miss scenario.

Co-developed-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-02-19 17:49:48 -08:00
David S. Miller
41f57cfde1 Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Alexei Starovoitov says:

====================
pull-request: bpf 2020-02-19

The following pull-request contains BPF updates for your *net* tree.

We've added 10 non-merge commits during the last 10 day(s) which contain
a total of 10 files changed, 93 insertions(+), 31 deletions(-).

The main changes are:

1) batched bpf hashtab fixes from Brian and Yonghong.

2) various selftests and libbpf fixes.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-19 16:42:35 -08:00
Randy Dunlap
bd1a5a53d7 security: <linux/lsm_hooks.h>: fix all kernel-doc warnings
Fix all kernel-doc warnings in <linux/lsm_hooks.h>.
Fixes the following warnings:

../include/linux/lsm_hooks.h:1830: warning: Function parameter or member 'quotactl' not described in 'security_list_options'
../include/linux/lsm_hooks.h:1830: warning: Function parameter or member 'quota_on' not described in 'security_list_options'
../include/linux/lsm_hooks.h:1830: warning: Function parameter or member 'sb_free_mnt_opts' not described in 'security_list_options'
../include/linux/lsm_hooks.h:1830: warning: Function parameter or member 'sb_eat_lsm_opts' not described in 'security_list_options'
../include/linux/lsm_hooks.h:1830: warning: Function parameter or member 'sb_kern_mount' not described in 'security_list_options'
../include/linux/lsm_hooks.h:1830: warning: Function parameter or member 'sb_show_options' not described in 'security_list_options'
../include/linux/lsm_hooks.h:1830: warning: Function parameter or member 'sb_add_mnt_opt' not described in 'security_list_options'
../include/linux/lsm_hooks.h:1830: warning: Function parameter or member 'd_instantiate' not described in 'security_list_options'
../include/linux/lsm_hooks.h:1830: warning: Function parameter or member 'getprocattr' not described in 'security_list_options'
../include/linux/lsm_hooks.h:1830: warning: Function parameter or member 'setprocattr' not described in 'security_list_options'
../include/linux/lsm_hooks.h:1830: warning: Function parameter or member 'locked_down' not described in 'security_list_options'
../include/linux/lsm_hooks.h:1830: warning: Function parameter or member 'perf_event_open' not described in 'security_list_options'
../include/linux/lsm_hooks.h:1830: warning: Function parameter or member 'perf_event_alloc' not described in 'security_list_options'
../include/linux/lsm_hooks.h:1830: warning: Function parameter or member 'perf_event_free' not described in 'security_list_options'
../include/linux/lsm_hooks.h:1830: warning: Function parameter or member 'perf_event_read' not described in 'security_list_options'
../include/linux/lsm_hooks.h:1830: warning: Function parameter or member 'perf_event_write' not described in 'security_list_options'

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: John Johansen <john.johansen@canonical.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Micah Morton <mortonm@chromium.org>
Cc: James Morris <jmorris@namei.org>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Cc: linux-security-module@vger.kernel.org
Cc: Paul Moore <paul@paul-moore.com>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Cc: Eric Paris <eparis@parisplace.org>
Cc: Casey Schaufler <casey@schaufler-ca.com>
Cc: Kentaro Takeda <takedakn@nttdata.co.jp>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: James Morris <jmorris@namei.org>
2020-02-19 16:08:01 -08:00
Youri Querry
9d98809711 soc: fsl: dpio: Adding QMAN multiple enqueue interface
Update of QMAN the interface to enqueue frame. We now support multiple
enqueue (qbman_swp_enqueue_multiple) and multiple enqueue with
a table of descriptor (qbman_swp_enqueue_multiple_desc).

Signed-off-by: Youri Querry <youri.querry_1@nxp.com>
Acked-by: Roy Pledge <roy.pledge@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
2020-02-19 18:06:16 -06:00
Daniel Xu
fff7b64355 bpf: Add bpf_read_branch_records() helper
Branch records are a CPU feature that can be configured to record
certain branches that are taken during code execution. This data is
particularly interesting for profile guided optimizations. perf has had
branch record support for a while but the data collection can be a bit
coarse grained.

We (Facebook) have seen in experiments that associating metadata with
branch records can improve results (after postprocessing). We generally
use bpf_probe_read_*() to get metadata out of userspace. That's why bpf
support for branch records is useful.

Aside from this particular use case, having branch data available to bpf
progs can be useful to get stack traces out of userspace applications
that omit frame pointers.

Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200218030432.4600-2-dxu@dxuuu.xyz
2020-02-19 14:37:36 -08:00