Commit graph

1,264,895 commits

Author SHA1 Message Date
Hans de Goede
7c86e17455 ACPI: x86: Move acpi_quirk_skip_serdev_enumeration() out of CONFIG_X86_ANDROID_TABLETS
Some recent(ish) Dell AIO devices have a backlight controller board
connected to an UART.

This UART has a DELL0501 HID with CID set to PNP0501 so that the UART is
still handled by 8250_pnp.c. Unfortunately there is no separate ACPI device
with an UartSerialBusV2() resource to model the backlight-controller.

The next patch in this series will use acpi_quirk_skip_serdev_enumeration()
to still create a serdev for this for a backlight driver to bind to
instead of creating a /dev/ttyS0.

This new acpi_quirk_skip_serdev_enumeration() use is not limited to Android
X86 tablets, so move it out of the ifdef CONFIG_X86_ANDROID_TABLETS block.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2024-02-22 11:13:18 +01:00
Cong Dang
b52e015aa6 arm64: dts: renesas: gray-hawk-single: Add QSPI FLASH support
Describe the QSPI FLASH on the Gray Hawk Single board.

Signed-off-by: Cong Dang <cong.dang.xn@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/96d6567024cef9fcd6b04f92a697301c1c8d1d8e.1708354463.git.geert+renesas@glider.be
2024-02-22 11:06:33 +01:00
Cong Dang
4cd9289b70 arm64: dts: renesas: r8a779h0: Add RPC node
Add a device node for the SPI Multi I/O Bus Controller (RPC-IF) on the
Renesas R-Car V4M (R8A779H0) SoC.

Signed-off-by: Cong Dang <cong.dang.xn@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/26f9c5d5a7944db3813ed53459aa9c5767c1bdc0.1708354463.git.geert+renesas@glider.be
2024-02-22 11:06:33 +01:00
Geert Uytterhoeven
7a7db3d1d7 arm64: dts: renesas: r8a779h0: Add DMA support
Add device nodes for the Direct Memory Access Controllers for System
(SYS-DMAC) on the Renesas R-Car V4M (R8A779H0) SoC.

Link all DMA consumers to the corresponding DMA controller channels.

Based on patches in the BSP by Thanh Le and Minh Le.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/44de886cd83f41659d2f6962c0e277f548fb0adb.1707916707.git.geert+renesas@glider.be
2024-02-22 11:06:33 +01:00
Cong Dang
81f1919b4f arm64: dts: renesas: gray-hawk-single: Add eMMC support
Describe the eMMC on the Gray Hawk Single board.

Signed-off-by: Cong Dang <cong.dang.xn@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/208bfc781b1488e253e19626ad80876c34c86758.1707915763.git.geert+renesas@glider.be
2024-02-22 11:06:33 +01:00
Cong Dang
a0ac5b9d98 arm64: dts: renesas: r8a779h0: Add SD/MMC node
Add a device node for SD/MMC on Renesas R-Car V4M (R8A779H0) SoC.

Signed-off-by: Cong Dang <cong.dang.xn@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/4433cd73049ae517ea163bc703555ee8d9a4dd82.1707915763.git.geert+renesas@glider.be
2024-02-22 11:06:33 +01:00
Kuninori Morimoto
f0728eaf76 ARM: dts: renesas: r8a7778: Add missing reg-names to sound node
Sound Driver requires "reg-names" to get register info.  Current driver
tries to get register info via "reg" instead of "reg-names" as backup
plan, but this support will be removed soon.
Use "reg-namess" for r8a7778 sound.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/87cyszpwmp.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2024-02-22 11:06:33 +01:00
Biju Das
f66d8501c9 arm64: dts: renesas: rzg2ul-smarc: Enable CRU, CSI support
Enable CRU and CSI on RZ/G2UL SMARC EVK and tie the CSI to the OV5645
sensor using a Device Tree overlay.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240213141300.159847-1-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2024-02-22 11:06:33 +01:00
Thanh Quan
63275d848a arm64: dts: renesas: gray-hawk-single: Add Ethernet support
Describe the wiring of the first Ethernet AVB instance to the Micrel
KSZ9031RNXVB PHY.

Signed-off-by: Thanh Quan <thanh.quan.xn@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/b83b21b6477a0e31f99eaedbd36c03014b72ec8a.1707661382.git.geert+renesas@glider.be
2024-02-22 11:06:33 +01:00
Thanh Quan
243066ecc0 arm64: dts: renesas: r8a779h0: Add Ethernet-AVB support
Add device nodes for the Renesas Ethernet AVB (EtherAVB-IF) blocks on
the Renesas R-Car V4M (R8A779H0) SoC.

Signed-off-by: Thanh Quan <thanh.quan.xn@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/ae7488c0065b455b45f23253c997a94f4850064f.1707661382.git.geert+renesas@glider.be
2024-02-22 11:06:33 +01:00
Geert Uytterhoeven
7edbb5880d arm64: dts: renesas: r8a779g0: Correct avb[01] reg sizes
All Ethernet AVB instances on R-Car V4H have registers related to UDP/IP
support, but the declared register blocks for the first two instances
are too small to cover them.

Fix this by extending the register block sizes.

Fixes: 848c82db56 ("arm64: dts: renesas: r8a779g0: Add RAVB nodes")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/83437778614a7c96f4d8f1be98dffeee29bb4a0b.1707660323.git.geert+renesas@glider.be
2024-02-22 11:06:33 +01:00
Geert Uytterhoeven
0c51912331 arm64: dts: renesas: r8a779a0: Correct avb[01] reg sizes
All Ethernet AVB instances on R-Car V3U have registers related to UDP/IP
support, but the declared register blocks for the first two instances
are too small to cover them.

Fix this by extending the register block sizes.

Fixes: 5a633320f0 ("arm64: dts: renesas: r8a779a0: Add Ethernet-AVB support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/ce6ce3c4b1495e02e7c1803fca810a7178a84500.1707660323.git.geert+renesas@glider.be
2024-02-22 11:06:32 +01:00
Claudiu Beznea
145f33d1f1 arm64: dts: renesas: r9a08g045: Add PSCI support
Add PSCI support to enable suspend/resume with the help of TF-A.

Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240208135629.2840932-3-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2024-02-22 11:06:32 +01:00
Claudiu Beznea
150d81f7a2 arm64: dts: renesas: rzg3s-smarc-som: Guard Ethernet IRQ GPIO hogs
Ethernet IRQ GPIOs are marked as GPIO hogs.  Thus, these GPIOs are
requested at probe time without considering if there are other
peripherals that need them.  The Ethernet IRQ GPIOs are shared with
SDHI2.  Selection between Ethernet and SDHI2 is done through a hardware
switch.  To avoid scenarios where one wants to boot with SDHI2 support
and some SDHI pins are not propertly configured because of the GPIO
hogs, guard the Ethernet IRQ GPIO hogs with the proper build flag.

Fixes: 932ff0c802 ("arm64: dts: renesas: rzg3s-smarc-som: Enable the Ethernet interfaces")
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240208124300.2740313-13-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2024-02-22 11:06:32 +01:00
Lad Prabhakar
bf7e37716d arm64: dts: renesas: r9a08g045: Add missing interrupts to IRQC node
The IRQC block on the RZ/G3S (R9A08G045) SoC supports ECCRAM error
interrupts too.  Add those missing interrupts to the IRQC node.

Fixes: 837918aa3f ("arm64: dts: renesas: r9a08g045: Add IA55 interrupt controller node")
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240205144421.51195-4-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2024-02-22 11:06:32 +01:00
Lad Prabhakar
14fe225dd5 arm64: dts: renesas: rzg2l: Add missing interrupts to IRQC nodes
The IRQC IP block supports Bus error and ECCRAM interrupts on RZ/G2L and
alike SoC's (listed below).  Update the IRQC nodes with the missing
interrupts, and additionally, include the 'interrupt-names' properties
in the IRQC nodes so that the driver can parse interrupts by name.

  - R9A07G043U              - RZ/G2UL
  - R9A07G044L/R9A07G044LC  - RZ/{G2L,G2LC}
  - R9A07G054               - RZ/V2L

Fixes: 5edc51af5b ("arm64: dts: renesas: r9a07g044: Add IRQC node")
Fixes: 48ab6eddd8 ("arm64: dts: renesas: r9a07g043u: Add IRQC node")
Fixes: 379478ab09 ("arm64: dts: renesas: r9a07g054: Add IRQC node")
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240205144421.51195-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2024-02-22 11:06:32 +01:00
Duy Nguyen
6bd8b0bc44 arm64: dts: renesas: r8a779h0: Add CA76 operating points
Add operating points for running the Cortex-A76 CPU cores on R-Car V4M
at various speeds, up to the Normal (1.0 GHz).

Signed-off-by: Duy Nguyen <duy.nguyen.rh@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/736b5836ec2b54e8b36712866309dc1b7ee1fc48.1706796979.git.geert+renesas@glider.be
2024-02-22 11:03:32 +01:00
Duy Nguyen
4c1fd23a22 arm64: dts: renesas: r8a779h0: Add CPU core clocks
Describe the clocks for the four Cortex-A76 CPU cores.
CA76 CPU cores 0,1,2,3 are clocked by ZC0,ZC1,ZC2,ZC3.

Signed-off-by: Duy Nguyen <duy.nguyen.rh@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/c64cf6ca1590fa1a36b90a18fd70c831d5b8318e.1706796979.git.geert+renesas@glider.be
2024-02-22 11:03:32 +01:00
Duy Nguyen
ad761924be arm64: dts: renesas: r8a779h0: Add CPUIdle support
Support CPUIdle for ARM Cortex-A76 on R-Car V4M.

Signed-off-by: Duy Nguyen <duy.nguyen.rh@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/848d176bdbcaf3bc44e5dae555afa9c812a19fd1.1706796979.git.geert+renesas@glider.be
2024-02-22 11:03:32 +01:00
Duy Nguyen
5db13ece46 arm64: dts: renesas: r8a779h0: Add secondary CA76 CPU cores
Complete the description of the Cortex-A76 CPU cores and L3 cache
controllers on the Renesas R-Car V4M (R8A779H0) SoC, including CPU
topology and PSCI support for enabling CPU cores.

Signed-off-by: Duy Nguyen <duy.nguyen.rh@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/c2a38a0da74915bf2a9171e53886c83a1c732934.1706796979.git.geert+renesas@glider.be
2024-02-22 11:03:32 +01:00
Duy Nguyen
20a942d60b arm64: dts: renesas: r8a779h0: Add L3 cache controller
Describe the cache configuration for the first Cortex-A76 CPU core on
the Renesas R-Car V4M (R8A779H0) SoC.

Signed-off-by: Duy Nguyen <duy.nguyen.rh@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/9d56a46892c5e0957d244370e6809013cf815905.1706796979.git.geert+renesas@glider.be
2024-02-22 11:03:32 +01:00
Cong Dang
93e28f8871 arm64: dts: renesas: r8a779h0: Add GPIO nodes
Add device nodes for the General Purpose Input/Output (GPIO) blocks on
the Renesas R-Car V4M (R8A779H0) SoC.

Signed-off-by: Cong Dang <cong.dang.xn@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/d4c1c40404ab84c7e7c07612077ca1a319ae7283.1706796918.git.geert+renesas@glider.be
2024-02-22 11:03:32 +01:00
Geert Uytterhoeven
74a9d17af7 arm64: dts: renesas: gray-hawk-single: Add I2C0 and EEPROMs
Enable the I2C0 bus on the Gray Hawk Single board, and describe the I2C
EEPROMs present.

Based on patches for Gray Hawk in the BSP by Hai Pham.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/960595394a274b675f1ec9ec1c324e4cc1ac1f77.1706796660.git.geert+renesas@glider.be
2024-02-22 11:03:32 +01:00
Hai Pham
e3e7a865c4 arm64: dts: renesas: r8a779h0: Add I2C nodes
Add device nodes for the I2C Bus Interfaces on the Renesas R-Car V4M
(R8A779H0) SoC.

Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/7dbbe13428273c5786ddff6ea7af6724fcdd4de8.1706796660.git.geert+renesas@glider.be
2024-02-22 11:03:32 +01:00
Wolfram Sang
b9bf24346c arm64: dts: renesas: ulcb-kf: Adapt sound 5v regulator to schematics
Sound uses the standard 5V supply, so rename the fixed regulator as
such. Also add properties documenting it is always on, also during boot.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240129212350.33370-3-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2024-02-22 11:03:32 +01:00
Wolfram Sang
52629143bd arm64: dts: renesas: ulcb-kf: Adapt 1.8V HDMI regulator to schematics
It is named T1.8V in the schematics. Also add properties documenting it
is always on, also during boot.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240129212350.33370-2-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2024-02-22 11:03:31 +01:00
Wolfram Sang
d151e4e544 arm64: dts: renesas: ulcb-kf: Add regulators for PCIe ch1
Without them, no power, so cards do not get recognized.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240129135840.28988-1-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2024-02-22 11:03:31 +01:00
Geert Uytterhoeven
4b232e29cb arm64: dts: renesas: gray-hawk-single: Add serial console pin control
Complete the descriptions of the serial console and the external serial
clock by adding pin control.

Based on patches for Gray Hawk in the BSP by Hai Pham and Nghia Nguyen.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/b1eb2d3364d5ead7f7bcf7a737c5914971db64d3.1706266286.git.geert+renesas@glider.be
2024-02-22 11:03:31 +01:00
Hai Pham
9a1442efd1 arm64: dts: renesas: r8a779h0: Add pinctrl device node
Add a device node for the Pin Function Controller on the Renesas R-Car
V4M (R8A779H0) SoC.

Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/0ab32290014b64ddbee5c9ec2808c8294d0b6192.1706266286.git.geert+renesas@glider.be
2024-02-22 11:03:31 +01:00
Thomas Hellström
40510a941d drm/ttm: Fix an invalid freeing on already freed page in error path
If caching mode change fails due to, for example, OOM we
free the allocated pages in a two-step process. First the pages
for which the caching change has already succeeded. Secondly
the pages for which a caching change did not succeed.

However the second step was incorrectly freeing the pages already
freed in the first step.

Fix.

Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Fixes: 379989e7cb ("drm/ttm/pool: Fix ttm_pool_alloc error path")
Cc: Christian König <christian.koenig@amd.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Huang Rui <ray.huang@amd.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v6.4+
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240221073324.3303-1-thomas.hellstrom@linux.intel.com
2024-02-22 10:57:41 +01:00
Geert Uytterhoeven
8c987693dc ARM: dts: renesas: rcar-gen2: Add missing #interrupt-cells to DA9063 nodes
make dtbs_check W=2:

    arch/arm/boot/dts/renesas/r8a7790-lager.dts:444.11-458.5: Warning (interrupt_provider): /i2c-mux4/pmic@58: Missing '#interrupt-cells' in interrupt provider
    ...

Fix this by adding the missing #interrupt-cells properties.

Reported-by: Rob Herring <robh@kernel.org>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/a351e503ea97fb1af68395843f513925ff1bdf26.1707922460.git.geert+renesas@glider.be
2024-02-22 10:55:03 +01:00
Tom Parkin
359e54a93a l2tp: pass correct message length to ip6_append_data
l2tp_ip6_sendmsg needs to avoid accounting for the transport header
twice when splicing more data into an already partially-occupied skbuff.

To manage this, we check whether the skbuff contains data using
skb_queue_empty when deciding how much data to append using
ip6_append_data.

However, the code which performed the calculation was incorrect:

     ulen = len + skb_queue_empty(&sk->sk_write_queue) ? transhdrlen : 0;

...due to C operator precedence, this ends up setting ulen to
transhdrlen for messages with a non-zero length, which results in
corrupted packets on the wire.

Add parentheses to correct the calculation in line with the original
intent.

Fixes: 9d4c75800f ("ipv4, ipv6: Fix handling of transhdrlen in __ip{,6}_append_data()")
Cc: David Howells <dhowells@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240220122156.43131-1-tparkin@katalix.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-02-22 10:42:17 +01:00
Ingo Molnar
b7bcffe752 x86/vdso/kbuild: Group non-standard build attributes and primary object file rules together
The fresh changes to the vDSO Makefile in:

  289d0a475c ("x86/vdso: Use CONFIG_COMPAT_32 to specify vdso32")
  329b77b59f ("x86/vdso: Simplify obj-y addition")

Conflicted with a pending change in:

  b388e57d46 ("x86/vdso: Fix rethunk patching for vdso-image-{32,64}.o")

Which was resolved in a simple fasion in this merge commit:

  f14df823a6 ("Merge branch 'x86/vdso' into x86/core, to resolve conflict and to prepare for dependent changes")

... but all these changes make me look and notice a bit of historic baggage
left in the Makefile:

  - Disordered build rules where non-standard build attributes relating to
    were placed sometimes several lines after - and sometimes *before*
    the .o build rules of the object files... Functional but inconsistent.

  - Inconsistent vertical spacing, stray whitespaces, inconsistent spelling
    of 'vDSO' over the years, a few spelling mistakes and inconsistent
    capitalization of comment blocks.

Tidy it all up. No functional changes intended.

Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2024-02-22 10:40:20 +01:00
Eric Farman
85a19b3054 KVM: s390: only deliver the set service event bits
The SCLP driver code masks off the last two bits of the parameter [1]
to determine if a read is required, but doesn't care about the
contents of those bits. Meanwhile, the KVM code that delivers
event interrupts masks off those two bits but sends both to the
guest, even if only one was specified by userspace [2].

This works for the driver code, but it means any nuances of those
bits gets lost. Use the event pending mask as an actual mask, and
only send the bit(s) that were specified in the pending interrupt.

[1] Linux: sclp_interrupt_handler() (drivers/s390/char/sclp.c:658)
[2] QEMU: service_interrupt() (hw/s390x/sclp.c:360..363)

Fixes: 0890ddea1a ("KVM: s390: protvirt: Add SCLP interrupt handling")
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20240205214300.1018522-1-farman@linux.ibm.com
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Message-Id: <20240205214300.1018522-1-farman@linux.ibm.com>
2024-02-22 10:36:42 +01:00
Rafael J. Wysocki
e0359f1551 Revert "ACPI: EC: Use a spin lock without disabing interrupts"
Commit eb9299bead ("ACPI: EC: Use a spin lock without disabing
interrupts") introduced an unexpected user-visible change in
behavior, which is a significant CPU load increase when the EC
is in use.

This most likely happens due to increased spinlock contention
and so reducing this effect would require a major rework of the
EC driver locking.  There is no time for this in the current
cycle, so revert commit eb9299bead.

Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218511
Reported-by: Dieter Mummenschanz <dmummenschanz@web.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2024-02-22 10:35:54 +01:00
Paolo Abeni
9ff2794306 netfilter pull request 24-02-22
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEN9lkrMBJgcdVAPub1V2XiooUIOQFAmXWjUEACgkQ1V2XiooU
 IOQEqA//c15K4sL5v3ROUgDKYo7d5W7mnb3c9T2b2I4tZIyAj+f1+6DhGz2PB/5L
 BjdAXbz2FrrkSt/x4fcu0CkcXC2d5tVcVhvt+CTpaph70xOXBL0XtN+x3NfXlZVg
 r9Q/6tV3pBE6u6LdqogQsQtehhqYMgzPVfKuUVYbvM4efqV/vvKiBbHl5DedtKk0
 GKiwGEKnXbBUxpJueSUAX/+C64Ldlhw4MVswkJfjA8r56FJEsxPet9tlAphqd+6P
 qg1bECQf3NQw8DVBtMc9U1Izb8HhiGEskG72e450Uo1X7SL6EACDFCMVTAeEz+fu
 sDNPpS/V7PEP3tImJm0Rj6N6iYGL19tWfCVMdesP+KF5yokNbQF54Xgz4ETkVyrt
 EZkR5JL6pRLBQ7FJ/2TD0IIFEn09KayMXLI0Dlugl90lOsn1T6Dnmmh8563nZ2eT
 6zio/4NqYRzCXSieCs3zHRZCH0l2tttkkKi0MhVJwGBJd8Wl0qeXHK/UxlE5Pfkn
 qhD2ryuCHbIad2JxS8mb1pIzMhw8sy3LsxQQ91CShQ2ujTLY35dhcWJPDm8u77md
 VE4lTUmj8uvExLjG/xf+5bzvTutYUGdacRmYwzyFTl/ix3tYvg75GoI4l2iGd4xl
 6COxPtLaFDkxo5GxODLrmjxe11E8nT2BKI7rPsOjee8ueAzJZdM=
 =iPIR
 -----END PGP SIGNATURE-----

Merge tag 'nf-24-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes for net:

1) If user requests to wake up a table and hook fails, restore the
   dormant flag from the error path, from Florian Westphal.

2) Reset dst after transferring it to the flow object, otherwise dst
   gets released twice from the error path.

3) Release dst in case the flowtable selects a direct xmit path, eg.
   transmission to bridge port. Otherwise, dst is memleaked.

4) Register basechain and flowtable hooks at the end of the command.
   Error path releases these datastructure without waiting for the
   rcu grace period.

5) Use kzalloc() to initialize struct nft_hook to fix a KMSAN report
   on access to hook type, also from Florian Westphal.

netfilter pull request 24-02-22

* tag 'nf-24-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
  netfilter: nf_tables: use kzalloc for hook allocation
  netfilter: nf_tables: register hooks last when adding new chain/flowtable
  netfilter: nft_flow_offload: release dst in case direct xmit path is used
  netfilter: nft_flow_offload: reset dst in route object after setting up flow
  netfilter: nf_tables: set dormant flag on hook register failure
====================

Link: https://lore.kernel.org/r/20240222000843.146665-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-02-22 10:20:50 +01:00
Ingo Molnar
f14df823a6 Merge branch 'x86/vdso' into x86/core, to resolve conflict and to prepare for dependent changes
Conflicts:
	arch/x86/entry/vdso/Makefile

We also want to change arch/x86/entry/vdso/Makefile in a followup
commit, so merge the trees for this.

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2024-02-22 10:16:53 +01:00
Paolo Abeni
fdcd4467ba bpf-for-netdev
-----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZdaBCwAKCRDbK58LschI
 g3EhAP0d+S18mNabiEGz8efnE2yz3XcFchJgjiRS8WjOv75GvQEA6/sWncFjbc8k
 EqxPHmeJa19rWhQlFrmlyNQfLYGe4gY=
 =VkOs
 -----END PGP SIGNATURE-----

Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf

Daniel Borkmann says:

====================
pull-request: bpf 2024-02-22

The following pull-request contains BPF updates for your *net* tree.

We've added 11 non-merge commits during the last 24 day(s) which contain
a total of 15 files changed, 217 insertions(+), 17 deletions(-).

The main changes are:

1) Fix a syzkaller-triggered oops when attempting to read the vsyscall
   page through bpf_probe_read_kernel and friends, from Hou Tao.

2) Fix a kernel panic due to uninitialized iter position pointer in
   bpf_iter_task, from Yafang Shao.

3) Fix a race between bpf_timer_cancel_and_free and bpf_timer_cancel,
   from Martin KaFai Lau.

4) Fix a xsk warning in skb_add_rx_frag() (under CONFIG_DEBUG_NET)
   due to incorrect truesize accounting, from Sebastian Andrzej Siewior.

5) Fix a NULL pointer dereference in sk_psock_verdict_data_ready,
   from Shigeru Yoshida.

6) Fix a resolve_btfids warning when bpf_cpumask symbol cannot be
   resolved, from Hari Bathini.

bpf-for-netdev

* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
  bpf, sockmap: Fix NULL pointer dereference in sk_psock_verdict_data_ready()
  selftests/bpf: Add negtive test cases for task iter
  bpf: Fix an issue due to uninitialized bpf_iter_task
  selftests/bpf: Test racing between bpf_timer_cancel_and_free and bpf_timer_cancel
  bpf: Fix racing between bpf_timer_cancel_and_free and bpf_timer_cancel
  selftest/bpf: Test the read of vsyscall page under x86-64
  x86/mm: Disallow vsyscall page read for copy_from_kernel_nofault()
  x86/mm: Move is_vsyscall_vaddr() into asm/vsyscall.h
  bpf, scripts: Correct GPL license name
  xsk: Add truesize to skb_add_rx_frag().
  bpf: Fix warning for bpf_cpumask in verifier
====================

Link: https://lore.kernel.org/r/20240221231826.1404-1-daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-02-22 10:04:47 +01:00
Colin Ian King
372709508b ALSA: echoaudio: remove redundant assignment to variable clock
The variable clock is being assigned a value that is never read,
it is being re-assigned a new value in every case in the following
switch statement. The assignment is redundant and can be removed.

Cleans up clang scan build warning:
sound/pci/echoaudio/echoaudio_3g.c:277:2: warning: Value stored
to 'clock' is never read [deadcode.DeadStores]

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20240221113809.3410109-1-colin.i.king@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-02-22 10:04:40 +01:00
David Howells
5916f439f2 Convert coda to use the new mount API
Convert the coda filesystem to the new internal mount API as the old
one will be obsoleted and removed.  This allows greater flexibility in
communication of mount parameters between userspace, the VFS and the
filesystem.

See Documentation/filesystems/mount_api.rst for more information.

Note this is slightly tricky as coda currently only has a binary mount data
interface.  This is handled through the parse_monolithic hook.

Also add a more conventional interface with a parameter named "fd" that
takes an fd that refers to a coda psdev, thereby specifying the index to
use.

Signed-off-by: David Howells <dhowells@redhat.com>
Co-developed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
[sandeen: forward port to current upstream mount API interfaces]
Link: https://lore.kernel.org/r/97650eeb-94c7-4041-b58c-90e81e76b699@redhat.com
Tested-by: Jan Harkes <jaharkes@cs.cmu.edu>
Reviewed-by: Ian Kent <raven@themaw.net>
cc: coda@cs.cmu.edu
Signed-off-by: Christian Brauner <brauner@kernel.org>
2024-02-22 10:03:38 +01:00
Dmitry Antipov
0611a640e6 eventpoll: prefer kfree_rcu() in __ep_remove()
In '__ep_remove()', prefer 'kfree_rcu()' over 'call_rcu()' with
dummy 'epi_rcu_free()' callback. This follows commit d0089603fa
("fs: prefer kfree_rcu() in fasync_remove_entry()") and should not
be backported to stable as well.

Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Link: https://lore.kernel.org/r/20240221112205.48389-2-dmantipov@yandex.ru
Signed-off-by: Christian Brauner <brauner@kernel.org>
2024-02-22 10:03:31 +01:00
Christian Brauner
4af6ccb469
Merge series 'Use Maple Trees for simple_offset utilities' of https://lore.kernel.org/r/170820083431.6328.16233178852085891453.stgit@91.116.238.104.host.secureserver.net
Pull simple offset series from Chuck Lever

In an effort to address slab fragmentation issues reported a few
months ago, I've replaced the use of xarrays for the directory
offset map in "simple" file systems (including tmpfs).

Thanks to Liam Howlett for helping me get this working with Maple
Trees.

* series 'Use Maple Trees for simple_offset utilities' of https://lore.kernel.org/r/170820083431.6328.16233178852085891453.stgit@91.116.238.104.host.secureserver.net: (6 commits)
  libfs: Convert simple directory offsets to use a Maple Tree
  test_maple_tree: testing the cyclic allocation
  maple_tree: Add mtree_alloc_cyclic()
  libfs: Add simple_offset_empty()
  libfs: Define a minimum directory offset
  libfs: Re-arrange locking in offset_iterate_dir()

Signed-off-by: Christian Brauner <brauner@kernel.org>
2024-02-22 10:03:26 +01:00
Rafał Miłecki
8fa5560456 dt-bindings: net: wireless: mt76: allow all 4 interrupts for MT7981
MT7981 (Filogic 820) is a low cost version of MT7986 (Filogic 830) with
a similar wireless controller that also supports four interrupts.

Cc: Peter Chiu <chui-hao.chiu@mediatek.com>
Cc: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-02-22 09:55:19 +01:00
Colin Ian King
a1e163bd29 wifi: mt76: Remove redundant assignment to variable tidno
The variable tidno is being assigned a value that is not being read
and is being re-assigned a new value a few statements later.
The assignment is redundant and can be removed.

Cleans up clang scan warning:
drivers/net/wireless/mediatek/mt76/agg-rx.c:125:5: warning: Value stored
to 'tidno' during its initialization is never read [deadcode.DeadStores]

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-02-22 09:55:19 +01:00
Ming Yen Hsieh
e9a46175a7 wifi: mt76: fix the issue of missing txpwr settings from ch153 to ch177
Because the number of channels to be configured is calculated using the %,
and it results in 0 when there's an exact division, this leads to some
channels not having their tx power configured.

Fixes: 7801da3388 ("wifi: mt76: mt7921: enable set txpower for UNII-4")
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-02-22 09:55:19 +01:00
Michael Lo
8cd725742e wifi: mt76: mt7921: fix suspend issue on MediaTek COB platform
MediaTek's controller driver on COB platform (e.g. MT8188) is
capable of controlling power supplies and reset pin of a component
(e.g. a WIFI chip) in power-on and power-off process.

Due to this optional feature, mt76 need to inform controller
that mt76 need to keep power during suspend. Otherwise WIFI will be
powered off when system enters suspend process.

The "wakeup-source" property was used for the device that need
this to go into suspend mode so that mt76 suspend handler doesn't
fail and the system is able to enter into a suspend state.

An example:
wifi: mt7921@0 {
	wifi0{
		reg = <0x0000 0 0 0 0>;
		wakeup-source;
	};
};

Signed-off-by: Michael Lo <michael.lo@mediatek.com>
Signed-off-by: Ming Yen Hsieh <MingYen.Hsieh@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-02-22 09:55:19 +01:00
Leon Yen
352d966126 wifi: mt76: mt7921: fix a potential association failure upon resuming
In multi-channel scenarios, the granted channel must be aborted before
suspending. Otherwise, the firmware will be put into a wrong state,
resulting in an association failure after resuming.
With this patch, the granted channel will be aborted before suspending
if necessary.

Signed-off-by: Leon Yen <leon.yen@mediatek.com>
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-02-22 09:55:19 +01:00
Ming Yen Hsieh
c2b22e2675 wifi: mt76: mt7921: fix the unfinished command of regd_notifier before suspend
Before entering suspend, we need to ensure that all MCU command are
completed. In some cases, such as with regd_notifier, there is a
chance that CLC commands, will be executed before suspend.

Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Signed-off-by: Leon Yen <leon.yen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-02-22 09:55:19 +01:00
Ming Yen Hsieh
420ad9182c wifi: mt76: mt792x: update the country list of EU for ACPI SAR
This patch updates the EU country list to ensure the MTCL table
works correctly.

Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Signed-off-by: Leon Yen <leon.yen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-02-22 09:55:19 +01:00
Ming Yen Hsieh
07ce1d4637 wifi: mt76: mt792x: fix a potential loading failure of the 6Ghz channel config from ACPI
In some case, the MTCL table will exist, but MTDS table will not.
So the SAR will init fail. This patch make MTCL and MTDS can exist
with no dependence.

Fixes: f965333e49 ("mt76: mt7921: introduce ACPI SAR support")
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Signed-off-by: Leon Yen <leon.yen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-02-22 09:55:19 +01:00