MPAM's PMG bits extend its PARTID space, meaning the same PMG value can be used
for different control groups.
This means once a CLOSID is allocated, all its monitoring ids may still be
dirty, and held in limbo.
Instead of allocating the first free CLOSID, on architectures where
CONFIG_RESCTRL_RMID_DEPENDS_ON_CLOSID is enabled, search
closid_num_dirty_rmid[] to find the cleanest CLOSID.
The CLOSID found is returned to closid_alloc() for the free list
to be updated.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Link: https://lore.kernel.org/r/20240213184438.16675-11-james.morse@arm.com
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
The resctrl CLOSID allocator uses a single 32bit word to track which
CLOSID are free. The setting and clearing of bits is open coded.
Convert the existing open coded bit manipulations of closid_free_map
to use __set_bit() and friends. These don't need to be atomic as this
list is protected by the mutex.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Link: https://lore.kernel.org/r/20240213184438.16675-10-james.morse@arm.com
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
MPAM's PMG bits extend its PARTID space, meaning the same PMG value can be
used for different control groups.
This means once a CLOSID is allocated, all its monitoring ids may still be
dirty, and held in limbo.
Keep track of the number of RMID held in limbo each CLOSID has. This will
allow a future helper to find the 'cleanest' CLOSID when allocating.
The array is only needed when CONFIG_RESCTRL_RMID_DEPENDS_ON_CLOSID is
defined. This will never be the case on x86.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Link: https://lore.kernel.org/r/20240213184438.16675-9-james.morse@arm.com
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
MPAMs RMID values are not unique unless the CLOSID is considered as well.
alloc_rmid() expects the RMID to be an independent number.
Pass the CLOSID in to alloc_rmid(). Use this to compare indexes when
allocating. If the CLOSID is not relevant to the index, this ends up comparing
the free RMID with itself, and the first free entry will be used. With MPAM the
CLOSID is included in the index, so this becomes a walk of the free RMID
entries, until one that matches the supplied CLOSID is found.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Link: https://lore.kernel.org/r/20240213184438.16675-8-james.morse@arm.com
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
x86 systems identify traffic using the CLOSID and RMID. The CLOSID is
used to lookup the control policy, the RMID is used for monitoring. For
x86 these are independent numbers.
Arm's MPAM has equivalent features PARTID and PMG, where the PARTID is
used to lookup the control policy. The PMG in contrast is a small number
of bits that are used to subdivide PARTID when monitoring. The
cache-occupancy monitors require the PARTID to be specified when
monitoring.
This means MPAM's PMG field is not unique. There are multiple PMG-0, one
per allocated CLOSID/PARTID. If PMG is treated as equivalent to RMID, it
cannot be allocated as an independent number. Bitmaps like rmid_busy_llc
need to be sized by the number of unique entries for this resource.
Treat the combined CLOSID and RMID as an index, and provide architecture
helpers to pack and unpack an index. This makes the MPAM values unique.
The domain's rmid_busy_llc and rmid_ptrs[] are then sized by index, as
are domain mbm_local[] and mbm_total[].
x86 can ignore the CLOSID field when packing and unpacking an index, and
report as many indexes as RMID.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Link: https://lore.kernel.org/r/20240213184438.16675-7-james.morse@arm.com
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
x86's RMID are independent of the CLOSID. An RMID can be allocated,
used and freed without considering the CLOSID.
MPAM's equivalent feature is PMG, which is not an independent number,
it extends the CLOSID/PARTID space. For MPAM, only PMG-bits worth of
'RMID' can be allocated for a single CLOSID.
i.e. if there is 1 bit of PMG space, then each CLOSID can have two
monitor groups.
To allow resctrl to disambiguate RMID values for different CLOSID,
everything in resctrl that keeps an RMID value needs to know the CLOSID
too. This will always be ignored on x86.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Reviewed-by: Xin Hao <xhao@linux.alibaba.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Link: https://lore.kernel.org/r/20240213184438.16675-6-james.morse@arm.com
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
RMIDs are allocated for each monitor or control group directory, because
each of these needs its own RMID. For control groups,
rdtgroup_mkdir_ctrl_mon() later goes on to allocate the CLOSID.
MPAM's equivalent of RMID is not an independent number, so can't be
allocated until the CLOSID is known. An RMID allocation for one CLOSID
may fail, whereas another may succeed depending on how many monitor
groups a control group has.
The RMID allocation needs to move to be after the CLOSID has been
allocated.
Move the RMID allocation out of mkdir_rdt_prepare() to occur in its caller,
after the mkdir_rdt_prepare() call. This allows the RMID allocator to
know the CLOSID.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Link: https://lore.kernel.org/r/20240213184438.16675-5-james.morse@arm.com
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
When monitoring is supported, each monitor and control group is allocated an
RMID. For control groups, rdtgroup_mkdir_ctrl_mon() later goes on to allocate
the CLOSID.
MPAM's equivalent of RMID are not an independent number, so can't be allocated
until the CLOSID is known. An RMID allocation for one CLOSID may fail, whereas
another may succeed depending on how many monitor groups a control group has.
The RMID allocation needs to move to be after the CLOSID has been allocated.
Move the RMID allocation and mondata dir creation to a helper.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Link: https://lore.kernel.org/r/20240213184438.16675-4-james.morse@arm.com
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
rmid_ptrs[] is allocated from dom_data_init() but never free()d.
While the exit text ends up in the linker script's DISCARD section,
the direction of travel is for resctrl to be/have loadable modules.
Add resctrl_put_mon_l3_config() to cleanup any memory allocated
by rdt_get_mon_l3_config().
There is no reason to backport this to a stable kernel.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Link: https://lore.kernel.org/r/20240213184438.16675-3-james.morse@arm.com
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
tick_nohz_full_mask lists the CPUs that are nohz_full. This is only needed when
CONFIG_NO_HZ_FULL is defined. tick_nohz_full_cpu() allows a specific CPU to be
tested against the mask, and evaluates to false when CONFIG_NO_HZ_FULL is not
defined.
The resctrl code needs to pick a CPU to run some work on, a new helper prefers
housekeeping CPUs by examining the tick_nohz_full_mask. Hiding the declaration
behind #ifdef CONFIG_NO_HZ_FULL forces all the users to be behind an #ifdef
too.
Move the tick_nohz_full_mask declaration, this lets callers drop the #ifdef,
and guard access to tick_nohz_full_mask with IS_ENABLED() or something like
tick_nohz_full_cpu().
The definition does not need to be moved as any callers should be removed at
compile time unless CONFIG_NO_HZ_FULL is defined.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Reinette Chatre <reinette.chatre@intel.com> # for resctrl dependency
Tested-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Link: https://lore.kernel.org/r/20240213184438.16675-2-james.morse@arm.com
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Bindings allow a "wake", not "enable", GPIO. Schematics also use WAKE
name for the pin:
sa8155p-adp.dtb: pcie@1c00000: Unevaluated properties are not allowed ('enable-gpio' was unexpected)
Fixes: a1c86c6805 ("arm64: dts: qcom: sm8150: Add PCIe nodes")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240108131216.53867-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Bindings allow a "wake", not "enable", GPIO. Schematics also use WAKE
name for the pin:
sdm845-db845c.dtb: pcie@1c00000: Unevaluated properties are not allowed ('enable-gpio' was unexpected)
Fixes: 4a657c264b ("arm64: dts: qcom: db845c: Enable PCIe controllers")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240108131216.53867-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
clang-16 warns about casting between incompatible function types:
drivers/gpu/drm/nouveau/nvkm/subdev/bios/shadow.c:161:10: error: cast from 'void (*)(const struct firmware *)' to 'void (*)(void *)' converts to incompatible function type [-Werror,-Wcast-function-type-strict]
161 | .fini = (void(*)(void *))release_firmware,
This one was done to use the generic shadow_fw_release() function as a
callback for struct nvbios_source. Change it to use the same prototype
as the other five instances, with a trivial helper function that actually
calls release_firmware.
Fixes: 70c0f263cc ("drm/nouveau/bios: pull in basic vbios subdev, more to come later")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240213095753.455062-1-arnd@kernel.org
The SPM / SAW2 device also provides a voltage regulator functionality
with optional AVS (Adaptive Voltage Scaling) support. The exact register
sequence and voltage ranges differs from device to device.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240102-saw2-spm-regulator-v7-5-0472ec237f49@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Move internal SPM driver structures to the driver itself, removing them
from the public API. The CPUidle driver doesn't use them at all.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240102-saw2-spm-regulator-v7-4-0472ec237f49@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The SAW2 device can optionally provide a voltage regulator supplying the
CPU core, cluster or L2 cache. Change the boolean 'regulator' property
into a proper regulator description. This breaks schema compatibility
for the sake of properly describing the regulator.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240102-saw2-spm-regulator-v7-3-0472ec237f49@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Define compatible strings for SAW2 units present on MSM8960, IPQ4019
and IPQ8064. There is no need to include SAW version into the compat
string, so just use the SoC and SAW2 kind.
Also add missing L2 SAW2 compatibles for MSM8974 and APQ8084, they
follow the existing CPU SAW2 strings.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240102-saw2-spm-regulator-v7-2-0472ec237f49@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The Qualcomm SPM / SAW2 device is described in two bindigns files:
arm/msm/qcom,saw2.txt and soc/qcom/qcom,spm.yaml. Merge the former into
the latter, adding detailed device node description. While we are at it,
also rename qcom,spm.yaml to qcom,saw2.yaml to follow the actual
compatible used for these devices.
The regulator property is retained as is. It will be changed in the
later patches.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240102-saw2-spm-regulator-v7-1-0472ec237f49@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
- Fix direct write error handling to avoid a race between failed IO
completion and the submission path itself which can result in an
invalid file size exposed to the user after the failed IO.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSRPv8tYSvhwAzJdzjdoc3SxdoYdgUCZc9S/AAKCRDdoc3SxdoY
dgilAQDhQeRxzZLXO5lh5LGeqveo88kXuQclCK9VeqnCr0cnHQD/RTXvo464Vf4c
DAuDtLxRA16sj8WlLkUVkvjMKdjYaQ8=
=n1Tp
-----END PGP SIGNATURE-----
Merge tag 'zonefs-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs
Pull zonefs fix from Damien Le Moal:
- Fix direct write error handling to avoid a race between failed IO
completion and the submission path itself which can result in an
invalid file size exposed to the user after the failed IO.
* tag 'zonefs-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs:
zonefs: Improve error handling
The VEB (virtual embedded switch) as a switch element can be
connected according datasheet though its uplink to:
- Physical port
- Port Virtualizer (not used directly by i40e driver but can
be present in MFP mode where the physical port is shared
between PFs)
- No uplink (aka floating VEB)
But VEB uplink cannot be connected to another VEB and any attempt
to do so results in:
"i40e 0000:02:00.0: couldn't add VEB, err -EIO aq_err I40E_AQ_RC_ENOENT"
that indicates "the uplink SEID does not point to valid element".
Remove this logic from the driver code this way:
1) For debugfs only allow to build floating VEB (uplink_seid == 0)
or main VEB (uplink_seid == mac_seid)
2) Do not recurse in i40e_veb_link_event() as no VEB cannot have
sub-VEBs
3) Ditto for i40e_veb_rebuild() + simplify the function as we know
that the VEB for rebuild can be only the main LAN VEB or some
of the floating VEBs
4) In i40e_rebuild() there is no need to check veb->uplink_seid
as the possible ones are 0 and MAC SEID
5) In i40e_vsi_release() do not take into account VEBs whose
uplink is another VEB as this is not possible
6) Remove veb_idx field from i40e_veb as a VEB cannot have
sub-VEBs
Tested using i40e debugfs interface:
1) Initial state
[root@cnb-03 net-next]# CMD="/sys/kernel/debug/i40e/0000:02:00.0/command"
[root@cnb-03 net-next]# echo dump switch > $CMD
[root@cnb-03 net-next]# dmesg -c
[ 98.440641] i40e 0000:02:00.0: header: 3 reported 3 total
[ 98.446053] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16
[ 98.452593] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0
[ 98.458856] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16
2) Add floating VEB
[root@cnb-03 net-next]# echo add relay > $CMD
[root@cnb-03 net-next]# dmesg -c
[ 122.745630] i40e 0000:02:00.0: added relay 162
[root@cnb-03 net-next]# echo dump switch > $CMD
[root@cnb-03 net-next]# dmesg -c
[ 136.650049] i40e 0000:02:00.0: header: 4 reported 4 total
[ 136.655466] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16
[ 136.661994] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0
[ 136.668264] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16
[ 136.674787] i40e 0000:02:00.0: type=17 seid=162 uplink=0 downlink=0
3) Add VMDQ2 VSI to this new VEB
[root@cnb-03 net-next]# dmesg -c
[ 168.351763] i40e 0000:02:00.0: added VSI 394 to relay 162
[ 168.374652] enp2s0f0np0v0: NIC Link is Up, 40 Gbps Full Duplex, Flow Control: None
[root@cnb-03 net-next]# echo dump switch > $CMD
[root@cnb-03 net-next]# dmesg -c
[ 195.683204] i40e 0000:02:00.0: header: 5 reported 5 total
[ 195.688611] i40e 0000:02:00.0: type=19 seid=394 uplink=162 downlink=16
[ 195.695143] i40e 0000:02:00.0: type=17 seid=162 uplink=0 downlink=0
[ 195.701410] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16
[ 195.707935] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0
[ 195.714201] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16
4) Try to delete the VEB
[root@cnb-03 net-next]# echo del relay 162 > $CMD
[root@cnb-03 net-next]# dmesg -c
[ 239.260901] i40e 0000:02:00.0: deleting relay 162
[ 239.265621] i40e 0000:02:00.0: can't remove VEB 162 with 1 VSIs left
5) Do PF reset and check switch status after rebuild
[root@cnb-03 net-next]# echo pfr > $CMD
[root@cnb-03 net-next]# echo dump switch > $CMD
[root@cnb-03 net-next]# dmesg -c
...
[ 272.333655] i40e 0000:02:00.0: header: 5 reported 5 total
[ 272.339066] i40e 0000:02:00.0: type=19 seid=394 uplink=162 downlink=16
[ 272.345599] i40e 0000:02:00.0: type=17 seid=162 uplink=0 downlink=0
[ 272.351862] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16
[ 272.358387] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0
[ 272.364654] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16
6) Delete VSI and delete VEB
[ 297.199116] i40e 0000:02:00.0: deleting VSI 394
[ 299.807580] i40e 0000:02:00.0: deleting relay 162
[ 309.767905] i40e 0000:02:00.0: header: 3 reported 3 total
[ 309.773318] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16
[ 309.779845] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0
[ 309.786111] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Although the i40e supports so-called floating VEB (VEB without
an uplink connection to external network), this support is
broken. This functionality is currently unused (except debugfs)
but it will be used by subsequent series for switchdev mode
slow-path. Fix this by following:
1) Handle correctly floating VEB (VEB with uplink_seid == 0)
in i40e_reconstitute_veb() and look for owner VSI and
create it only for non-floating VEBs and also set bridge
mode only for such VEBs as the floating ones are using
always VEB mode.
2) Handle correctly floating VEB in i40e_veb_release() and
disallow its release when there are some VSIs. This is
different from regular VEB that have owner VSI that is
connected to VEB's uplink after VEB deletion by FW.
3) Fix i40e_add_veb() to handle 'vsi' that is NULL for floating
VEBs. For floating VEB use 0 for downlink SEID and 'true'
for 'default_port' parameters as per datasheet.
4) Fix 'add relay' command in i40e_dbg_command_write() to allow
to create floating VEB by 'add relay 0 0' or 'add relay'
Tested using debugfs:
1) Initial state
[root@host net-next]# echo dump switch > $CMD
[root@host net-next]# dmesg -c
[ 173.701286] i40e 0000:02:00.0: header: 3 reported 3 total
[ 173.706701] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16
[ 173.713241] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0
[ 173.719507] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16
2) Add floating VEB
[root@host net-next]# CMD="/sys/kernel/debug/i40e/0000:02:00.0/command"
[root@host net-next]# echo add relay > $CMD
[root@host net-next]# dmesg -c
[ 245.551720] i40e 0000:02:00.0: added relay 162
[root@host net-next]# echo dump switch > $CMD
[root@host net-next]# dmesg -c
[ 276.984371] i40e 0000:02:00.0: header: 4 reported 4 total
[ 276.989779] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16
[ 276.996302] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0
[ 277.002569] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16
[ 277.009091] i40e 0000:02:00.0: type=17 seid=162 uplink=0 downlink=0
3) Add VMDQ2 VSI to this new VEB
[root@host net-next]# echo add vsi 162 > $CMD
[root@host net-next]# dmesg -c
[ 332.314030] i40e 0000:02:00.0: added VSI 394 to relay 162
[ 332.337486] enp2s0f0np0v0: NIC Link is Up, 40 Gbps Full Duplex, Flow Control: None
[root@host net-next]# echo dump switch > $CMD
[root@host net-next]# dmesg -c
[ 387.284490] i40e 0000:02:00.0: header: 5 reported 5 total
[ 387.289904] i40e 0000:02:00.0: type=19 seid=394 uplink=162 downlink=16
[ 387.296446] i40e 0000:02:00.0: type=17 seid=162 uplink=0 downlink=0
[ 387.302708] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16
[ 387.309234] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0
[ 387.315500] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16
4) Try to delete the VEB
[root@host net-next]# echo del relay 162 > $CMD
[root@host net-next]# dmesg -c
[ 428.749297] i40e 0000:02:00.0: deleting relay 162
[ 428.754011] i40e 0000:02:00.0: can't remove VEB 162 with 1 VSIs left
5) Do PF reset and check switch status after rebuild
[root@host net-next]# echo pfr > $CMD
[root@host net-next]# echo dump switch > $CMD
[root@host net-next]# dmesg -c
[ 738.056172] i40e 0000:02:00.0: header: 5 reported 5 total
[ 738.061577] i40e 0000:02:00.0: type=19 seid=394 uplink=162 downlink=16
[ 738.068104] i40e 0000:02:00.0: type=17 seid=162 uplink=0 downlink=0
[ 738.074367] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16
[ 738.080892] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0
[ 738.087160] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16
6) Delete VSI and delete VEB
[root@host net-next]# echo del vsi 394 > $CMD
[root@host net-next]# echo del relay 162 > $CMD
[root@host net-next]# echo dump switch > $CMD
[root@host net-next]# dmesg -c
[ 1233.081126] i40e 0000:02:00.0: deleting VSI 394
[ 1239.345139] i40e 0000:02:00.0: deleting relay 162
[ 1244.886920] i40e 0000:02:00.0: header: 3 reported 3 total
[ 1244.892328] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16
[ 1244.898853] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0
[ 1244.905119] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Add two helpers i40e_(veb|vsi)_get_by_seid() to find corresponding
VEB or VSI by their SEID value and use these helpers to replace
existing open-coded loops.
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Introduce i40e_for_each_vsi() and i40e_for_each_veb() helper
macros and use them to iterate relevant arrays.
Replace pattern:
for (i = 0; i < pf->num_alloc_vsi; i++)
by:
i40e_for_each_vsi(pf, i, vsi)
and pattern:
for (i = 0; i < I40E_MAX_VEB; i++)
by
i40e_for_each_veb(pf, i, veb)
These macros also check if array item pf->vsi[i] or pf->veb[i]
are not NULL and skip such items so we can remove redundant
checks from loop bodies.
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Use existing i40e_find_vsi_by_type() to find a VSI
associated with flow director.
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Add the description for the display panel found on this phone.
Unfortunately the LCDB module on PM6150L isn't yet supported upstream so
we need to use a dummy regulator-fixed in the meantime.
And with this done we can also enable the GPU and set the zap shader
firmware path.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20240216-fp4-panel-v3-4-a556e4b79640@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The GMU won't probe without GPU being enabled, so we can remove the
disabled status so we don't have to explicitly enable the GMU in all the
devices that enable GPU.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20240216-fp4-panel-v3-3-a556e4b79640@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
This clock controller has never been used in the DT files merged to the
kernel. According to Sibi, it only worked on the pre-production devices.
For the production devices this functionality has been moved to the
firmware.
Drop the bindings now after dropping the driver itself.
Cc: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240216-drop-sc7180-mss-v1-2-0a8dc8d71c0c@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
This driver has never been used in the DT files merged to the kernel.
According to Sibi, it only worked on the pre-production devices. For the
production devices this functionality has been moved to the firmware.
Drop the driver to remove possible confusion.
Cc: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240216-drop-sc7180-mss-v1-1-0a8dc8d71c0c@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Like the Samsung Galaxy A3/A5, the Grand Prime/Core Prime uses a
Richtek RT5033 PMIC as battery fuel gauge, charger, flash LED and for some
regulators.
For now, only add the fuel gauge/battery device to the device tree, so we
can check the remaining battery percentage.
The other RT5033 drivers need some more work first before they can be used
properly.
Signed-off-by: Joe Mason <buddyjojo06@outlook.com>
[Raymond: Move to fortuna-common. Use interrupts-extended]
Signed-off-by: Raymond Hackley <raymondhackley@protonmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240216124639.24689-1-raymondhackley@protonmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Commit f04a32b2c5 ("selftests/bpf: Do not use sign-file as testcase")
removed the TEST_CUSTOM_PROGS assignment, and removed it from being used
on TEST_GEN_FILES. Remove two leftovers from that cleanup. Found by
inspection.
Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alexey Gladkov <legion@kernel.org>
Link: https://lore.kernel.org/bpf/20240216-bpf-selftests-custom-progs-v1-1-f7cf281a1fda@suse.com
- Avoid dropping the page refcount twice when freeing an unlinked
page-table subtree.
-----BEGIN PGP SIGNATURE-----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=Coky
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-fixes-6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.8, take #2
- Avoid dropping the page refcount twice when freeing an unlinked
page-table subtree.
- Don't source the VFIO Kconfig twice
- Fix protected-mode locking order between kvm and vcpus
-----BEGIN PGP SIGNATURE-----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=wb0z
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-fixes-6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.8, take #1
- Don't source the VFIO Kconfig twice
- Fix protected-mode locking order between kvm and vcpus
A collection of device-specific fixes. It became a bit bigger
than wished, but all look reasonably small and safe to apply.
- A few Cirrus Logic CS35L56 and CS42L43 driver fixes
- ASoC SOF fixes and workarounds
- Various ASoC Intel fixes
- Lots of HD-, USB-audio and AMD ACP quirks
-----BEGIN PGP SIGNATURE-----
iQJCBAABCAAsFiEEIXTw5fNLNI7mMiVaLtJE4w1nLE8FAmXPayMOHHRpd2FpQHN1
c2UuZGUACgkQLtJE4w1nLE8wnhAAvJIP/ZCsVnOKkTPcns9shxcI8zaFKWOdOOny
mfL2M44glIxbcdUBDM2Ic1MX2lK6WVpDDXo+leAbbITLN985MFFwhg/NzS7QbEQu
ZRi28Keubbh2zqPzBOajiS1s10ELlQtiIGGEHccspElMEesitNqu0Hmd4NSWnTCX
iTsx4JwDQiiO1cOdanJ7134Jngp6q05nFVM3Y47wmqYLkP9z9/2hCRsq8scZ2f40
Blc7oEfqT10HFqXCqVZsHbLioDC03eCD9AoiUkkqDb/Hz21wemmyeiXT4OmbAIFp
ritzPz1RpeJhsOURyiE3KM2kQluh+JBK5Rq3eJ1tmxJbIWEAwbYRXs+yRHr2i6Xi
oOBVBc9Dq2RwKV7RnWIcV3+ZxrERJp80a4TKMSpQyECkDGiwZLyS/nGfM2+fJKg8
c66ofk+TfsnYZfKaonXwVf+HVqoMLsAo6bxle/0gLT6S3G6DvSGj3pWGqF8uZQJt
vpUbqSJBEI0JZTLngkWZRHPrLcCu+W+9/QrkTRYdwZUh5DfS9wbzXVz2Jm3cXpnB
os3v+lfJwXS6FBT51zCbO8BKbXPlaIQbLwPRW2+5zI2MaoEocAm0lSU1SXGcOuJY
6N5t6hHHNn7g7Gv8oimHQCKvzOUjnyVCDAn7P7/ILjoV47oQH9QRoNmHNNLjSzj1
4xr4yCg=
=PlQh
-----END PGP SIGNATURE-----
Merge tag 'sound-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of device-specific fixes. It became a bit bigger than
wished, but all look reasonably small and safe to apply.
- A few Cirrus Logic CS35L56 and CS42L43 driver fixes
- ASoC SOF fixes and workarounds
- Various ASoC Intel fixes
- Lots of HD-, USB-audio and AMD ACP quirks"
* tag 'sound-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (33 commits)
ALSA: usb-audio: More relaxed check of MIDI jack names
ALSA: hda/realtek: fix mute/micmute LED For HP mt645
ALSA: hda/realtek: cs35l41: Fix order and duplicates in quirks table
ALSA: hda/realtek: cs35l41: Fix device ID / model name
ALSA: hda/realtek: cs35l41: Add internal speaker support for ASUS UM3402 with missing DSD
ASoC: cs35l56: Workaround for ACPI with broken spk-id-gpios property
ALSA: hda: Add Lenovo Legion 7i gen7 sound quirk
ASoC: SOF: IPC3: fix message bounds on ipc ops
ASoC: SOF: ipc4-pcm: Workaround for crashed firmware on system suspend
ASoC: q6dsp: fix event handler prototype
ASoC: SOF: Intel: pci-lnl: Change the topology path to intel/sof-ipc4-tplg
ASoC: SOF: Intel: pci-tgl: Change the default paths and firmware names
ASoC: amd: yc: Fix non-functional mic on Lenovo 82UU
ASoC: rt5645: Add DMI quirk for inverted jack-detect on MeeGoPad T8
ASoC: rt5645: Make LattePanda board DMI match more precise
ASoC: SOF: amd: Fix locking in ACP IRQ handler
ASoC: rt5645: Fix deadlock in rt5645_jack_detect_work()
ASoC: Intel: cht_bsw_rt5645: Cleanup codec_name handling
ASoC: Intel: Boards: Fix NULL pointer deref in BYT/CHT boards
ASoC: cs35l56: Remove default from IRQ1_CFG register
...
- add missing stubs for functions that are not built with GPIOLIB disabled
-----BEGIN PGP SIGNATURE-----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=73oi
-----END PGP SIGNATURE-----
Merge tag 'gpio-fixes-for-v6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- add missing stubs for functions that are not built with GPIOLIB
disabled
* tag 'gpio-fixes-for-v6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpiolib: add gpio_device_get_label() stub for !GPIOLIB
gpiolib: add gpio_device_get_base() stub for !GPIOLIB
gpiolib: add gpiod_to_gpio_device() stub for !GPIOLIB
2f34d7337d ("workqueue: Fix queue_work_on() with BH workqueues") added
irq_work usage to workqueue; however, it turns out irq_work is actually
optional and the change breaks build on configuration which doesn't have
CONFIG_IRQ_WORK enabled.
Fix build by making workqueue use irq_work only when CONFIG_SMP and enabling
CONFIG_IRQ_WORK when CONFIG_SMP is set. It's reasonable to argue that it may
be better to just always enable it. However, this still saves a small bit of
memory for tiny UP configs and also the least amount of change, so, for now,
let's keep it conditional.
Verified to do the right thing for x86_64 allnoconfig and defconfig, and
aarch64 allnoconfig, allnoconfig + prink disable (SMP but nothing selects
IRQ_WORK) and a modified aarch64 Kconfig where !SMP and nothing selects
IRQ_WORK.
v2: `depends on SMP` leads to Kconfig warnings when CONFIG_IRQ_WORK is
selected by something else when !CONFIG_SMP. Use `def_bool y if SMP`
instead.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Fixes: 2f34d7337d ("workqueue: Fix queue_work_on() with BH workqueues")
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
-----BEGIN PGP SIGNATURE-----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=E5XR
-----END PGP SIGNATURE-----
Merge tag 'lsm-pr-20240215' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm
Pull lsm fix from Paul Moore:
"One small LSM patch to fix a potential integer overflow in the newly
added lsm_set_self_attr() syscall"
* tag 'lsm-pr-20240215' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
lsm: fix integer overflow in lsm_set_self_attr() syscall
Because FRAME_POINTER is defined in lib/Kconfig.debug, the arch Kconfig
should select it.
Add 'select FRAME_POINTER' to MCOUNT. ARCH_WANT_FRAME_POINTERS must
also be selected to avoid the unmet dependency warning.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andreas Larsson <andreas@gaisler.com>
Link: https://lore.kernel.org/r/20240215135749.1909812-1-masahiroy@kernel.org
__setup() handlers should return 1 to obsolete_checksetup() in
init/main.c to indicate that the boot option has been handled.
A return of 0 causes the boot option/value to be listed as an Unknown
kernel parameter and added to init's (limited) argument or environment
strings. Also, error return codes don't mean anything to
obsolete_checksetup() -- only non-zero (usually 1) or zero.
So return 1 from vdso_setup().
Fixes: 9a08862a5d ("vDSO for sparc")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Igor Zhbanov <izh1979@gmail.com>
Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru
Cc: "David S. Miller" <davem@davemloft.net>
Cc: sparclinux@vger.kernel.org
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Nick Alcock <nick.alcock@oracle.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: stable@vger.kernel.org
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Andreas Larsson <andreas@gaisler.com>
Signed-off-by: Andreas Larsson <andreas@gaisler.com>
Link: https://lore.kernel.org/r/20240211052808.22635-1-rdunlap@infradead.org
__setup() handlers should return 1 to obsolete_checksetup() in
init/main.c to indicate that the boot option has been handled.
A return of 0 causes the boot option/value to be listed as an Unknown
kernel parameter and added to init's (limited) argument or environment
strings. Also, error return codes don't mean anything to
obsolete_checksetup() -- only non-zero (usually 1) or zero.
So return 1 from setup_nmi_watchdog().
Fixes: e5553a6d04 ("sparc64: Implement NMI watchdog on capable cpus.")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Igor Zhbanov <izh1979@gmail.com>
Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru
Cc: "David S. Miller" <davem@davemloft.net>
Cc: sparclinux@vger.kernel.org
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: stable@vger.kernel.org
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Andreas Larsson <andreas@gaisler.com>
Signed-off-by: Andreas Larsson <andreas@gaisler.com>
Link: https://lore.kernel.org/r/20240211052802.22612-1-rdunlap@infradead.org
Now that the driver core can properly handle constant struct bus_type,
move the vio_bus_type variable to be a constant structure as well,
placing it into read-only memory which can not be modified at runtime.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andreas Larsson <andreas@gaisler.com>
Link: https://lore.kernel.org/r/20240204-bus_cleanup-sparc-v1-1-4ca7fe8de5f7@marliere.net
sparc has a 'btext' font used for the console which is almost identical
to the shared font_sun8x16, so use it rather than duplicating the data.
They were actually identical until about a decade ago when
commit bcfbeecea1 ("drivers: console: font_: Change a glyph from
"broken bar" to "vertical line"")
which changed the | in the shared font to be a solid
bar rather than a broken bar. That's the only difference.
This was originally spotted by PMD which noticed that PPC does
the same thing with the same data, and they also share a bunch
of functions to manipulate the data.
Tested very lightly with a boot without FS in qemu.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andreas Larsson <andreas@gaisler.com>
Link: https://lore.kernel.org/r/20230807010914.799713-1-linux@treblig.org
An old cleanup went a little too far and causes a warning with clang-16
and higher as it breaks control flow integrity (KCFI) rules:
drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy_shim.c:64:34: error: cast from 'void (*)(struct brcms_phy *)' to 'void (*)(void *)' converts to incompatible function type [-Werror,-Wcast-function-type-strict]
64 | brcms_init_timer(physhim->wl, (void (*)(void *))fn,
| ^~~~~~~~~~~~~~~~~~~~
Change this one instance back to passing a void pointer so it can be
used with the timer callback interface.
Fixes: d89a4c8060 ("staging: brcm80211: removed void * from softmac phy")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240213100548.457854-1-arnd@kernel.org
cdclk_compute_crawl_and_squash_midpoint() was still assuming
that cd2x divider == 1 (ie. full divider == 2). Remove that
assumption by computing the dividers properly.
We'll also toss in a WARN in case the divider somehow ends
up different between the old and new cdclk configs. That should
never happen given we have div==2 in all the cdclk table entries
for the affected platforms.
If in the future we need a config where the divider also needs
to be changed then we likely need to add an extra step into the
cdclk programming sequence to make sure things stay within
legal limits throughout the process.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240207013334.29606-4-ville.syrjala@linux.intel.com
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>