Commit graph

1,264,895 commits

Author SHA1 Message Date
Colin Ian King
125b28b189
spi: dw: remove redundant assignment to variable len
The variable id len being initialized with a value that is never read,
it is being re-assigned later on in a for-loop. The initialization is
redundant and can be removed.

Cleans up clang scan build warning:
drivers/spi/spi-dw-dma.c:580:17: warning: Although the value stored
to 'len' is used in the enclosing expression, the value is never
actually read from 'len' [deadcode.DeadStores]

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Acked-by: Serge Semin <fancer.lancer@gmail.com>
Link: https://msgid.link/r/20240215131603.2062332-1-colin.i.king@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2024-02-15 14:17:19 +00:00
Vaishnav Achath
2f277dbe1a arm64: dts: ti: Add support for TI J722S Evaluation Module
Add basic support for the J722S EVM with UART console and
MMC SD as rootfs.

Schematics are available at:
	https://www.ti.com/lit/zip/sprr495

Co-developed-by: Jayesh Choudhary <j-choudhary@ti.com>
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
Link: https://lore.kernel.org/r/20240206100608.127702-4-vaishnav.a@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2024-02-15 19:43:26 +05:30
Vaishnav Achath
ea55b9335a arm64: dts: ti: Introduce J722S family of SoCs
The J722S is a family of  application processors built for Automotive and
Linux Application development. J722S family of SoCs is a superset of the
AM62P SoC family and shares similar memory map, thus the nodes are being
reused from AM62P includes instead of duplicating the definitions.

Some highlights of J722S SoC (in addition to AM62P SoC features) are:
    * Two Cortex-R5F for Functional Safety or general-purpose usage and
      two C7x floating point vector DSP with Matrix Multiply Accelerator
      for deep learning.
    * Vision Processing Accelerator (VPAC) with image signal processor
      and Depth and Motion Processing Accelerator (DMPAC).
    * 7xUARTs, 3xSPI, 5xI2C, 2xUSB2, 2xCAN-FD, 3xMMC and SD, GPMC for
      NAND/FPGA connection, OSPI memory controller, 5xMcASP for audio,
      4xCSI-RX for Camera, 1 PCIe Gen3 controller, USB3.0 eCAP/eQEP,
      ePWM, among other peripherals.

For those interested, more details about this SoC can be found in the
Technical Reference Manual here:
	https://www.ti.com/lit/zip/sprujb3

Co-developed-by: Jayesh Choudhary <j-choudhary@ti.com>
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
Link: https://lore.kernel.org/r/20240206100608.127702-3-vaishnav.a@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2024-02-15 19:43:26 +05:30
Vaishnav Achath
de82585f62 dt-bindings: arm: ti: Add bindings for J722S SoCs
Add bindings for TI J722S family of devices.

Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240206100608.127702-2-vaishnav.a@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2024-02-15 19:43:26 +05:30
Baocheng Su
8829fe97f1 arm64: dts: ti: iot2050: Support IOT2050-SM variant
Main differences between the new variant and Advanced PG2:

1. Arduino interface is removed. Instead, an new ASIC is added for
   communicating with PLC 1200 signal modules.
2. USB 3.0 type A connector is removed, only USB 2.0 type A connector is
   available.
3. DP interface is removed. Instead, to communicate with PLC 1200 signal
   modules, a USB 3.0 type B connector is added but the signals are
   actually not USB.
4. DDR size is increased to 4 GB.
5. Two sensors are added, one tilt sensor and one light sensor.

The light sensor it not yet added to the DT at this stage as it depends
on to-be-added bindings.

Co-developed-by: Chao Zeng <chao.zeng@siemens.com>
Signed-off-by: Chao Zeng <chao.zeng@siemens.com>
Co-developed-by: Li Hua Qian <huaqian.li@siemens.com>
Signed-off-by: Li Hua Qian <huaqian.li@siemens.com>
Signed-off-by: Baocheng Su <baocheng.su@siemens.com>
[Jan: rebase over dtsi refactorings, split-out light sensor, improve LEDs]
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Link: https://lore.kernel.org/r/d24e920547986499f6e8e39c833e414679b12ab4.1707463401.git.jan.kiszka@siemens.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2024-02-15 19:43:25 +05:30
Jan Kiszka
5adf911c70 arm64: dts: ti: iot2050: Annotate LED nodes
Add function and color properties and use the common scheme for the node
name. We can't change the user-visible labels, though, due to existing
userspace relying on the current format.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Link: https://lore.kernel.org/r/331f8756483e3f896a3e50e069b3e2c0fae7a8ac.1707463401.git.jan.kiszka@siemens.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2024-02-15 19:43:25 +05:30
Jan Kiszka
f2c6d71e47 arm64: dts: ti: iot2050: Factor out DP related bits
There is a variant coming which does not support the Display Port. Move
all related bits into a separate dtsi so that only those variants
supporting the interface can include it.

Along that, remove a redundant clock setting from
k3-am65-iot2050-common-pg1.dtsi.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Link: https://lore.kernel.org/r/3397d917d7c97f7aec05bc5f65eef3a6fe843650.1707463401.git.jan.kiszka@siemens.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2024-02-15 19:43:25 +05:30
Jan Kiszka
f1a024f76d arm64: dts: ti: iot2050: Factor out enabling of USB3 support
Already simplifies the existing code by avoid the switch back in the m2
variant to what k3-am65-main.dtsi provided as base.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Link: https://lore.kernel.org/r/51d9be5ddbf74f90bc915ab5473b9ea9a4b0cdf7.1707463401.git.jan.kiszka@siemens.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2024-02-15 19:43:25 +05:30
Jan Kiszka
1ef134a432 arm64: dts: ti: iot2050: Factor out arduino connector bits
A new variant is to be added which will not have a arduino connector
like the existing ones. Factor out all bits that are specific to this
connector.

The split is not perfect because wkup_gpio0 is defined based on what is
common to all variants having the connector, thus containing also
connector-unrelated information. But this is still cleaner than
replicating this node into all 4 variants.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Link: https://lore.kernel.org/r/3366367dc9f190c9e21027b9a810886791e99245.1707463401.git.jan.kiszka@siemens.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2024-02-15 19:43:25 +05:30
Baocheng Su
93abe383bf arm64: dts: ti: iot2050: Disable R5 lockstep for all PG2 boards
The R5 lockstep disabling should be common for all PG2 boards, move it
from variants dts to common-pg2.dtsi.

As now the Basic PG2 consumes this twice, move Basic disabling to the
PG1 variant.

Signed-off-by: Baocheng Su <baocheng.su@siemens.com>
[Jan: avoid duplication of disabling for Basic PG2]
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Link: https://lore.kernel.org/r/f692d0211915aefd4de7c9ecff5234683c9c7d59.1707463401.git.jan.kiszka@siemens.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2024-02-15 19:43:25 +05:30
Su Bao Cheng
2a99c7792a dt-bindings: arm: ti: Add binding for Siemens IOT2050 SM variant
This new variant is derived from the Advanced PG2 board, removing the
Arduino interface, and adding a new ASIC for communicating with the
PLC 1200 signal modules.

Signed-off-by: Su Bao Cheng <baocheng.su@siemens.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/595d8d79647a0f5e6e635a22ee0fee011f8a5c5e.1707463401.git.jan.kiszka@siemens.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2024-02-15 19:43:25 +05:30
Andrejs Cainikovs
9c99b337a8 arm64: dts: ti: k3-am62-main: disable usb lpm
AM62 USB works with some devices, while failing to operate with others.

[  560.189822] xhci-hcd xhci-hcd.4.auto: xHCI Host Controller
[  560.195631] xhci-hcd xhci-hcd.4.auto: new USB bus registered, assigned bus number 2
[  574.388509] xhci-hcd xhci-hcd.4.auto: can't setup: -110
[  574.393814] xhci-hcd xhci-hcd.4.auto: USB bus 2 deregistered
[  574.399544] xhci-hcd: probe of xhci-hcd.4.auto failed with error -110

This seems to be related to LPM (Link Power Management), and disabling it
turns USB into reliable working state.

As per AM62 reference manual:

> 4.8.2.1 USB2SS Unsupported Features
>
> The following features are not supported on this family of devices:
> ...
> - USB 2.0 ECN: Link Power Management (LPM)
> ...

Fixes: 2240f96cf3 ("arm64: dts: ti: k3-am62-main: Add support for USB")
Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Roger Quadros <rogerq@ti.com>
Link: https://lore.kernel.org/r/20240209130213.38908-1-andrejs.cainikovs@gmail.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2024-02-15 19:42:40 +05:30
Francesco Dolcini
c186e85c72 arm64: dts: ti: verdin-am62: Set VDD CORE minimum voltage to 0.75V
Set VDD_CORE minimum voltage to 0.75V, TI AM62 can run at either 0.75V
or 0.85V depending on the actual speed grade and on the maximum
configured speed (1.4GHz frequency requires 0.85V).

The actual value is programmed into the PMIC EEPROM during manufacturing
(according to the SOC speed grade) and this ensure that both the voltage
values are valid and therefore the OS will not overwrite the value
programmed into the PMIC.

Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://lore.kernel.org/r/20240213155622.18309-1-francesco@dolcini.it
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2024-02-15 19:42:40 +05:30
Tony Lindgren
ce27f7f9e3 arm64: dts: ti: k3-am62-wakeup: Configure ti-sysc for wkup_uart0
The devices in the wkup domain are capable of waking up the system from
suspend. We can configure the wkup domain devices in a generic way using
the ti-sysc interconnect target module driver like we have done with the
earlier TI SoCs.

As ti-sysc manages the SYSCONFIG related registers independent of the
child hardware device, the wake-up configuration is also set even if
wkup_uart0 is reserved by sysfw.

The wkup_uart0 device has interconnect target module register mapping like
dra7 wkup uart. There is a 1 MB interconnect target range with one uart IP
block in the target module. The power domain and clock affects the whole
interconnect target module.

Note we change the functional clock name to follow the ti-sysc binding
and use "fck" instead of "fclk".

Also note that we need to disable the target module reset as noted by
Markus. Otherwise the sysfw using wkup_uart0 can get confused on some
devices leading to boot time issues such as mbox timeouts.

Tested-by: Dhruva Gole <d-gole@ti.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Markus Schneider-Pargmann <msp@baylibre.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20240213112510.6334-1-tony@atomide.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2024-02-15 19:42:40 +05:30
Nathan Morrisson
d8280f30a9 arm64: dts: ti: am62-phyboard-lyra: Add overlay to enable a GPIO fan
The phyBOARD-Lyra has a GPIO fan header. This overlay enables the fan
header and sets the fan to turn on at 65C.

Signed-off-by: Nathan Morrisson <nmorrisson@phytec.com>
Reviewed-by: Wadim Egorov <w.egorov@phytec.de>
Link: https://lore.kernel.org/r/20240213005248.1027842-1-nmorrisson@phytec.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2024-02-15 19:42:40 +05:30
Romain Naour
7f25d6926d arm64: dts: ti: k3-j721e-sk: fix PMIC interrupt number
The tps659413 and tps659411 nodes set WKUP_GPIO0_7 (G28) pin as input
to be used as PMIC interrupt but uses 9 (WKUP_GPIO0_9) as
"interrupts" property.

Replace 9 by 7 for both tps659413 and tps659411 after checking in the
board schematic [1].

[1] https://www.ti.com/tool/SK-TDA4VM

Fixes: b808cef0be ("arm64: dts: ti: k3-j721e-sk: Add TPS6594 family PMICs")
Cc: Neha Malcom Francis <n-francis@ti.com>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
Link: https://lore.kernel.org/r/20240209171146.307465-2-romain.naour@smile.fr
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2024-02-15 19:42:40 +05:30
Romain Naour
c205595e3b arm64: dts: ti: k3-am69-sk: fix PMIC interrupt number
The tps659413 node set WKUP_GPIO0_83 (AA37) pin as input to be used as
PMIC interrupt but uses 39 (WKUP_GPIO0_39) as "interrupts" property.

Replace 39 by 83 after checking in the board schematic [1].

[1] https://www.ti.com/tool/SK-AM69

Fixes: 865a1593bf ("arm64: dts: ti: k3-am69-sk: Add support for TPS6594 PMIC")
Cc: Neha Malcom Francis <n-francis@ti.com>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
Link: https://lore.kernel.org/r/20240209171146.307465-1-romain.naour@smile.fr
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2024-02-15 19:42:40 +05:30
Andrejs Cainikovs
4543e28664 arm64: dts: ti: verdin-am62: add support for Verdin USB1 interface
Add support for Verdin USB1 interface, implements role switch
functionality using "gpio-usb-b-connector", VBUS is also now
controlled with "regulator-fixed" using a standard GPIO.

Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://lore.kernel.org/r/20240209130106.38739-1-andrejs.cainikovs@gmail.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2024-02-15 19:42:40 +05:30
Kishon Vijay Abraham I
c094c53604 arm64: dts: ti: Add DT overlay for PCIe + USB3.0 SERDES personality card
Add overlay for PCIe (uses the second instance of PCIe in AM654x) and
USB3.0 SERDES personality card

The PCIe3/USB3 card is provided with the AM65x GP EVM configuration [1]
so apply the overlay to k3-am654-gp-evm.dtb

[1] https://www.ti.com/lit/ug/spruim7/spruim7.pdf

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20240208-for-v6-9-am65-overlays-2-0-v2-3-70bae3e91597@kernel.org
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2024-02-15 19:41:41 +05:30
Masahiro Yamada
8e8bc50003 ALSA: seq: remove redundant 'tristate' for SND_SEQ_UMP_CLIENT
'def_tristate' is a shorthand for 'default' + 'tristate'.

Another 'tristate' is redundant.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20240215135304.1909431-1-masahiroy@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-02-15 15:03:56 +01:00
Christoph Winklhofer
a3c0880436 w1: add UART w1 bus driver
Add a UART 1-Wire bus driver. The driver utilizes the UART interface via
the Serial Device Bus to create the 1-Wire timing patterns. The driver
was tested on a "Raspberry Pi 3B" with a DS18B20 and on a "Variscite
DART-6UL" with a DS18S20 temperature sensor.

The 1-Wire timing pattern and the corresponding UART baud-rate with the
interpretation of the transferred bytes are described in the document:

Link: https://www.analog.com/en/technical-articles/using-a-uart-to-implement-a-1wire-bus-master.html

In short, the UART peripheral must support full-duplex and operate in
open-drain mode. The timing patterns are generated by a specific
combination of baud-rate and transmitted byte, which corresponds to a
1-Wire read bit, write bit or reset.

Signed-off-by: Christoph Winklhofer <cj.winklhofer@gmail.com>
Link: https://lore.kernel.org/r/20240214-w1-uart-v7-3-6e21fa24e066@gmail.com
[krzysztof: w1_uart_serdev_receive_buf() return type fixup]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2024-02-15 15:02:33 +01:00
Takashi Iwai
3db9d4b395 ASoC: Fixes for v6.8
A relatively large set of fixes and quirk additions here but they're all
 driver specific, people seem to be back into the swing of things after
 the holidays.  This is all driver specific and much of it fairly minor.
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmXOEbkACgkQJNaLcl1U
 h9BzgAf/abgoQLJCpvLzEppfOvS3+uXjxZzOeRXcZJXa8a9RIzYx/GQoipsgL8n1
 1MpdbKKR63xeGiohASp0nUN6gVgviGZvutgI/+yISxlUktUn/g7P/vz2Zlq+7KMw
 T2/Vn3bYFFO2MXUZKaNdfizUVq67zXSNCT/+AAr6AYG//yGy5EfX2BO82vbwZm3e
 Yh/fQ3pMrhSI+el9gtSaeXrVs/KOyRDhJamVlE6q78Xm90z6wJ8wov4QTGEn5QjN
 8C3axogE4ZsXUsiq7o3G8Tn+YVHIZ10wGHlnSg3bIatn8CEA3kTi/QxboAVDZLeH
 0kyy98WPxtzJRYjNsz4YoT8t+He08A==
 =0kWz
 -----END PGP SIGNATURE-----

Merge tag 'asoc-fix-v6.8-rc4' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.8

A relatively large set of fixes and quirk additions here but they're all
driver specific, people seem to be back into the swing of things after
the holidays.  This is all driver specific and much of it fairly minor.
2024-02-15 15:00:31 +01:00
Roger Quadros
32b366a55e arm64: dts: ti: Add DT overlay for PCIe + USB2.0 SERDES personality card
Enable both SERDES and PCIe DT nodes in order to get PCIe working on
the SERDES PCIe x2 personality card.

The daughter card also has a USB 2.0 dual-role port. As the base board
already supports a 2.0 dual-role port, enable the port on the SERDES
card to be a host only port.

This will prevent user confusion as having 2 ports in device mode often
leads to confusion as to which port is bound to the gadget function driver.

The PCIe x2 card is provided with the AM65x IDK configuration [1]
so apply the overlay to k3-am654-idk.dtb

[1] https://www.ti.com/lit/ug/spruim6a/spruim6a.pdf

Co-developed-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Link: https://lore.kernel.org/r/20240208-for-v6-9-am65-overlays-2-0-v2-2-70bae3e91597@kernel.org
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2024-02-15 19:25:59 +05:30
Christoph Winklhofer
23b3333753 dt-bindings: w1: UART 1-Wire bus
Add device tree binding for UART 1-Wire bus.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Christoph Winklhofer <cj.winklhofer@gmail.com>
Link: https://lore.kernel.org/r/20240209-w1-uart-v6-2-3e753c149196@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2024-02-15 14:55:06 +01:00
Christoph Winklhofer
12d2a81c57 dt-bindings: serial: allow onewire as child node
The UART 1-Wire bus utilizes the Serial Device Bus to create the 1-wire
timing patterns.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Christoph Winklhofer <cj.winklhofer@gmail.com>
Link: https://lore.kernel.org/r/20240209-w1-uart-v6-1-3e753c149196@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2024-02-15 14:55:05 +01:00
Ricardo B. Marliere
a5251cd961 w1: make w1_bus_type const
Now that the driver core can properly handle constant struct bus_type,
move the w1_bus_type variable to be a constant structure as well,
placing it into read-only memory which can not be modified at runtime.

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Link: https://lore.kernel.org/r/20240204-bus_cleanup-w1-v1-1-a0f4c84d7db3@marliere.net
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2024-02-15 14:55:05 +01:00
Arnd Bergmann
a951884d82 kallsyms: ignore ARMv4 thunks along with others
lld is now able to build ARMv4 and ARMv4T kernels, which means it can
generate thunks for those (__ARMv4PILongThunk_*, __ARMv4PILongBXThunk_*)
that can interfere with kallsyms table generation since they do not get
ignore like the corresponding ARMv5+ ones are:

Inconsistent kallsyms data
Try "make KALLSYMS_EXTRA_PASS=1" as a workaround

Replace the hardcoded list of thunk symbols with a more general regex that
covers this one along with future symbols that follow the same pattern.

Fixes: 5eb6e28043 ("ARM: 9289/1: Allow pre-ARMv5 builds with ld.lld 16.0.0 and newer")
Fixes: efe6e30680 ("kallsyms: fix nonconverging kallsyms table with lld")
Suggested-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2024-02-15 22:44:56 +09:00
Geert Uytterhoeven
2601b6fb7d
regulator: lp873x: Use bitfield helpers
Use the FIELD_PREP() helper, instead open-coding the same operation.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://msgid.link/r/15edeaa9a644c4025234088da3dabb023fce04ac.1708002503.git.geert+renesas@glider.be
Signed-off-by: Mark Brown <broonie@kernel.org>
2024-02-15 13:41:11 +00:00
Geert Uytterhoeven
5319aaa9bb
regulator: lp87565: Use bitfield helpers
Use the FIELD_PREP() helper, instead open-coding the same operation.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://msgid.link/r/5e8781d31c983caf6bdabe36c5552077422cb8da.1708002575.git.geert+renesas@glider.be
Signed-off-by: Mark Brown <broonie@kernel.org>
2024-02-15 13:41:10 +00:00
Masahiro Yamada
74e0259495
ASoC: codecs: remove redundant 'tristate' in sound/soc/codecs/Kconfig
The type 'tristate' is already specified three lines above.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://msgid.link/r/20240215132854.1907630-1-masahiroy@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
2024-02-15 13:41:05 +00:00
Ricardo B. Marliere
0081e83be0 ALSA: seq: make snd_seq_bus_type const
Since commit d492cc2573 ("driver core: device.h: make struct
bus_type a const *"), the driver core can properly handle constant
struct bus_type, move the snd_seq_bus_type variable to be a constant
structure as well, placing it into read-only memory which can not be
modified at runtime.

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20240214-bus_cleanup-alsa-v1-2-8fedbb4afa94@marliere.net
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-02-15 13:48:03 +01:00
Ricardo B. Marliere
6eb25606fd ALSA: aoa: make soundbus_bus_type const
Since commit d492cc2573 ("driver core: device.h: make struct
bus_type a const *"), the driver core can properly handle constant
struct bus_type, move the soundbus_bus_type variable to be a constant
structure as well, placing it into read-only memory which can not be
modified at runtime.

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20240214-bus_cleanup-alsa-v1-1-8fedbb4afa94@marliere.net
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-02-15 13:48:03 +01:00
Kurt Kanzenbach
ea578703b0 igc: Add support for LEDs on i225/i226
Add support for LEDs on i225/i226. The LEDs can be controlled via sysfs
from user space using the netdev trigger. The LEDs are named as
igc-<bus><device>-<led> to be easily identified.

Offloading link speed and activity are supported. Other modes are simulated
in software by using on/off. Tested on Intel i225.

Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20240213184138.1483968-1-anthony.l.nguyen@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-02-15 13:38:59 +01:00
Andy Shevchenko
34ddc83dc7 auxdisplay: linedisp: Add support for overriding character mapping
There is already the driver using character mapping table for
7 or 14 segment display. It is possible to override it. Make
the similar in the line display library to allow other drivers
to utilise the same functionality.

Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2024-02-15 14:30:15 +02:00
Andy Shevchenko
70fb97c061 auxdisplay: linedisp: Provide struct linedisp_ops for future extension
Currently the line display library doesn't scale in case we want to
provide more operations. Prepare the library to take a newly created
struct linedisp_ops that scales.

Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2024-02-15 14:30:15 +02:00
Florian Fainelli
e5b2e810da net: bcmasp: Handle RX buffer allocation failure
The buffer_pg variable needs to hold an order-5 allocation (32 x
PAGE_SIZE) which, under memory pressure may fail to be allocated. Deal
with that error condition properly to avoid doing a NULL pointer
de-reference in the subsequent call to dma_map_page().

In addition, the err_reclaim_tx error label in bcmasp_netif_init() needs
to ensure that the TX NAPI object is properly deleted, otherwise
unregister_netdev() will spin forever attempting to test and clear
the NAPI_STATE_HASHED bit.

Fixes: 490cb41200 ("net: bcmasp: Add support for ASP2.0 Ethernet controller")
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Justin Chen <justin.chen@broadcom.com>
Link: https://lore.kernel.org/r/20240213173339.3438713-1-florian.fainelli@broadcom.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-02-15 13:27:29 +01:00
Kamal Heib
e8d8acad5a net: ena: Remove unlikely() from IS_ERR() condition
IS_ERR() is already using unlikely internally.

Signed-off-by: Kamal Heib <kheib@redhat.com>
Acked-by: Arthur Kiyanovski <akiyano@amazon.com>
Link: https://lore.kernel.org/r/20240213161502.2297048-1-kheib@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-02-15 13:24:21 +01:00
Ricardo B. Marliere
81800aef0e net: mdio_bus: make mdio_bus_type const
Since commit d492cc2573 ("driver core: device.h: make struct
bus_type a const *"), the driver core can properly handle constant
struct bus_type, move the mdio_bus_type variable to be a constant
structure as well, placing it into read-only memory which can not be
modified at runtime.

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20240213-bus_cleanup-mdio-v1-1-f9e799da7fda@marliere.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-02-15 13:20:55 +01:00
Shigeru Yoshida
984328c765 tipc: Cleanup tipc_nl_bearer_add() error paths
Consolidate the error paths of tipc_nl_bearer_add() under the common label
if the function holds rtnl_lock.

Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Reviewed-by: Tung Nguyen <tung.q.nguyen@dektech.com.au>
Link: https://lore.kernel.org/r/20240213134058.386123-1-syoshida@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-02-15 13:18:19 +01:00
Christian Marangi
038ba1dc4e net: phy: aquantia: add AQR111 and AQR111B0 PHY ID
Add Aquantia AQR111 and AQR111B0 PHY ID. These PHY advertise 10G speed
but actually supports up to 5G speed, hence some manual fixup is needed.

The Aquantia AQR111B0 PHY is just a variant of the AQR111 with smaller
chip size.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20240213133558.1836-1-ansuelsmth@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-02-15 13:15:08 +01:00
Uwe Kleine-König
452be9421e pwm: cros-ec: Make use of devm_pwmchip_alloc() function
This prepares the pwm-cros-ec driver to further changes of the pwm core
outlined in the commit introducing devm_pwmchip_alloc(). There is no
intended semantical change and the driver should behave as before.
The probe function had to be changed a bit because the number of PWMs
must be determined before allocation of the pwm_chip and its private
data now.

Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/b0afe9e25340f0a274ff3806687cf37a6cc31557.1707900770.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2024-02-15 12:59:21 +01:00
Uwe Kleine-König
19a568a8d3 pwm: cros-ec: Make use of pwmchip_parent() accessor
struct pwm_chip::dev is about to change. To not have to touch this
driver in the same commit as struct pwm_chip::dev, use the accessor
function provided for exactly this purpose.

Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/486c40609bd9e339d7e5576e2501f63111b59b8b.1707900770.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2024-02-15 12:59:21 +01:00
Uwe Kleine-König
7256c2e79b pwm: cros-ec: Change prototype of helpers to prepare further changes
pwm_chip allocation and registration is about to change. For that the
number of PWM devices must be known earlier in cros_ec_pwm_probe(). So
make cros_ec_pwm_get_duty() and cros_ec_num_pwms() independent of
struct cros_ec_pwm_device which is only available later.

Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/c0cfc75c1cba0f735555e0138387143ec101feb3.1707900770.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2024-02-15 12:59:21 +01:00
Uwe Kleine-König
b1a80d5053 pwm: crc: Make use of devm_pwmchip_alloc() function
This prepares the pwm-crc driver to further changes of the pwm core
outlined in the commit introducing devm_pwmchip_alloc(). There is no
intended semantical change and the driver should behave as before.

Link: https://lore.kernel.org/r/bbe4896eabc240c678c66fabb6329f4e6cd04eda.1707900770.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2024-02-15 12:59:21 +01:00
Uwe Kleine-König
5b86d1112b pwm: crc: Make use of pwmchip_parent() accessor
struct pwm_chip::dev is about to change. To not have to touch this
driver in the same commit as struct pwm_chip::dev, use the accessor
function provided for exactly this purpose.

Link: https://lore.kernel.org/r/a41b62365295be9debd4a9aaa80ca87fca35b320.1707900770.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2024-02-15 12:59:21 +01:00
Uwe Kleine-König
4709f38308 pwm: crc: Simplify code to determine the pwmchip's parent device
There is already a pointer to the pwmchip, make use of it directly
instead of using the struct crystalcove_pwm *crc_pwm just obtained from
it. This also has the advantage of not using struct
crystalcove_pwm::chip any more which will be dropped soon.

Link: https://lore.kernel.org/r/66d55649e13526bbd95d7bfd1cacfa0beb9efd43.1707900770.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2024-02-15 12:59:21 +01:00
Uwe Kleine-König
5412170f10 pwm: clps711x: Make use of devm_pwmchip_alloc() function
This prepares the pwm-clps711x driver to further changes of the pwm core
outlined in the commit introducing devm_pwmchip_alloc(). There is no
intended semantical change and the driver should behave as before.

Link: https://lore.kernel.org/r/334e633bb8e4c26dc59883b068466387769b65f9.1707900770.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2024-02-15 12:59:21 +01:00
Uwe Kleine-König
8e87e3dcb2 pwm: clk: Make use of devm_pwmchip_alloc() function
This prepares the pwm-clk driver to further changes of the pwm core
outlined in the commit introducing devm_pwmchip_alloc(). There is no
intended semantical change and the driver should behave as before.

Also convert the to_pwm_clk_chip() helper macro to a static inline to
get some type safety.

Link: https://lore.kernel.org/r/c02ccc955fe7a0aec7ce0ccaf5cd2bd902ae687f.1707900770.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2024-02-15 12:59:20 +01:00
Uwe Kleine-König
fc6549a936 pwm: clk: Prepare removing pwm_chip from driver data
This prepares the driver for further changes that will drop struct
pwm_chip chip from struct pwm_clk_chip. Use the pwm_chip as driver data
instead of the pwm_clk_chip to get access to the pwm_chip in
pwm_clk_remove() without using pcchip->chip.

Link: https://lore.kernel.org/r/cfbb7c571489ac3d9ca13835b3bd038aaca69638.1707900770.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2024-02-15 12:59:20 +01:00
Uwe Kleine-König
f3d1efd083 pwm: brcmstb: Make use of devm_pwmchip_alloc() function
This prepares the pwm-brcmstb driver to further changes of the pwm core
outlined in the commit introducing devm_pwmchip_alloc(). There is no
intended semantical change and the driver should behave as before.

Link: https://lore.kernel.org/r/adf9cb04f5d84ae604e97d4dc0708ff3677d72d7.1707900770.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2024-02-15 12:59:20 +01:00