This prepares the driver for further changes that will drop struct
pwm_chip chip from struct berlin_pwm_chip. Use the pwm_chip as driver
data instead of the berlin_pwm_chip to get access to the pwm_chip in
berlin_pwm_suspend() and berlin_pwm_resume() without using bpc->chip.
Link: https://lore.kernel.org/r/d2a0c5b664ef1bfd4719c645c069717d63fb4e65.1707900770.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
This prepares the driver for further changes that will drop struct
pwm_chip chip from struct atmel_tcb_pwm_chip. Use the pwm_chip as driver
data instead of the atmel_tcb_pwm_chip to get access to the pwm_chip in
the .suspend() and .resume() callbacks and atmel_tcb_pwm_remove()
without using tcbpwm->chip.
Link: https://lore.kernel.org/r/6a90083e9d1ab1c34422161593d6d7a669143217.1707900770.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
This prepares the driver for further changes that will drop struct
pwm_chip chip from struct atmel_hlcdc_pwm. Use the pwm_chip as driver
data instead of the atmel_hlcdc_pwm to get access to the pwm_chip in
the .suspend() and .resume() callbacks and atmel_hlcdc_pwm_remove()
without using atmel->chip.
Link: https://lore.kernel.org/r/0e97342f15540c7330d405eaaf3e68baa8e1e488.1707900770.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
This function allocates a struct pwm_chip and driver data. Compared to
the status quo the split into pwm_chip and driver data is new, otherwise
it doesn't change anything relevant (yet).
The intention is that after all drivers are switched to use this
allocation function, its possible to add a struct device to struct
pwm_chip to properly track the latter's lifetime without touching all
drivers again. Proper lifetime tracking is a necessary precondition to
introduce character device support for PWMs (that implements atomic
setting and doesn't suffer from the sysfs overhead of the /sys/class/pwm
userspace support).
The new function pwmchip_priv() (obviously?) only works for chips
allocated with pwmchip_alloc().
Link: https://lore.kernel.org/r/9577d6053a5a52536057dc8654ff567181c2da82.1707900770.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
-----BEGIN PGP SIGNATURE-----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=G4r8
-----END PGP SIGNATURE-----
Merge tag 'nf-24-02-15' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following batch contains Netfilter fixes for net:
1) Missing : in kdoc field in nft_set_pipapo.
2) Restore default DNAT behavior When a DNAT rule is configured via
iptables with different port ranges, from Kyle Swenson.
3) Restore flowtable hardware offload for bidirectional flows
by setting NF_FLOW_HW_BIDIRECTIONAL flag, from Felix Fietkau.
netfilter pull request 24-02-15
* tag 'nf-24-02-15' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: fix bidirectional offload regression
netfilter: nat: restore default DNAT behavior
netfilter: nft_set_pipapo: fix missing : in kdoc
====================
Link: https://lore.kernel.org/r/20240214233818.7946-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Doug Anderson observed that ChromeOS crashes are being reported which
include failing allocations of order 7 during core dumps due to ptrace
allocating storage for regsets:
chrome: page allocation failure: order:7,
mode:0x40dc0(GFP_KERNEL|__GFP_COMP|__GFP_ZERO),
nodemask=(null),cpuset=urgent,mems_allowed=0
...
regset_get_alloc+0x1c/0x28
elf_core_dump+0x3d8/0xd8c
do_coredump+0xeb8/0x1378
with further investigation showing that this is:
[ 66.957385] DOUG: Allocating 279584 bytes
which is the maximum size of the SVE regset. As Doug observes it is not
entirely surprising that such a large allocation of contiguous memory might
fail on a long running system.
The SVE regset is currently sized to hold SVE registers with a VQ of
SVE_VQ_MAX which is 512, substantially more than the architectural maximum
of 16 which we might see even in a system emulating the limits of the
architecture. Since we don't expose the size we tell the regset core
externally let's define ARCH_SVE_VQ_MAX with the actual architectural
maximum and use that for the regset, we'll still overallocate most of the
time but much less so which will be helpful even if the core is fixed to
not require contiguous allocations.
Specify ARCH_SVE_VQ_MAX in terms of the maximum value that can be written
into ZCR_ELx.LEN (where this is set in the hardware). For consistency
update the maximum SME vector length to be specified in the same style
while we are at it.
We could also teach the ptrace core about runtime discoverable regset sizes
but that would be a more invasive change and this is being observed in
practical systems.
Reported-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20240213-arm64-sve-ptrace-regset-size-v2-1-c7600ca74b9b@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Add the MIDR value of Microsoft Azure Cobalt 100, which is a Microsoft
implemented CPU based on r0p0 of the ARM Neoverse N2 CPU, and therefore
suffers from all the same errata.
CC: stable@vger.kernel.org # 5.15+
Signed-off-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240214175522.2457857-1-eahariha@linux.microsoft.com
Signed-off-by: Will Deacon <will@kernel.org>
These functions are useful to store and query driver private data
depending on the pwm_chip. After struct pwm_chip got its own struct
device, this can make use of dev_get_drvdata() and dev_set_drvdata() on
that device. These functions are required already now to convert
drivers to pwmchip_alloc() which must happen before changing
pwm_chip::dev.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/67514cdf29d29bd8b4ad8d44fac87f6ae6dca1e5.1707900770.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Currently a pwm_chip stores in its struct device *dev member a pointer
to the parent device. Preparing a change that embeds a full struct
device in struct pwm_chip, this accessor function should be used in all
drivers directly accessing chip->dev now. This way struct pwm_chip and
this new function can be changed without having to touch all drivers in
the same change set.
Make use of this function in the framework's core sources.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/cc30090d2f9762bed9854a55612144bccc910781.1707900770.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
MT7988 uses new registers layout just like MT7981 but it supports 8 PWM
interfaces.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240214140454.6438-2-zajec5@gmail.com
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
MT7988 has on-SoC controller that can control up to 8 PWM interfaces. It
differs from blocks on other SoCs (amount of PWMs & registers) so it
needs its own compatible string.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240214140454.6438-1-zajec5@gmail.com
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEUEC6huC2BN0pvD5fKDiiPnotvG8FAmXMwlUTHG1rbEBwZW5n
dXRyb25peC5kZQAKCRAoOKI+ei28bwDmCACBeVNV2d9mL8AwNoaIiUmOHF8LsclP
NsRSl4rz/TMDFgO2tX9oUQGLsZG0YTSqJ5dF3qI7zjskBlTBJX0y4fByvQAQ6mU9
ZhwZMBz3JSS+tuZFIMWqHW1yq2TXoTnx1IzIM5f+D83LWqtP5Jto15lw1Ratrtat
taZwGwR10cEWO0IFNUx+4c5SGa+gGbEBdr7UBlJU1MdZ9fzo+ByV/H6JrfY1qqEj
DvraQm/oNCVrSP5dVr1s+0Kqnh1X1ff+6JWs5q2CJDN7E+Ai2cOxrEd2/JP7GANG
S0UIqH744z3kJDSE+GuQjxF4vbXqX3qfKIP4Q+EYlNvs0oskIQ5ebCsW
=So6Y
-----END PGP SIGNATURE-----
Merge tag 'linux-can-fixes-for-6.8-20240214' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2024-02-14
this is a pull request of 3 patches for net/master.
the first patch is by Ziqi Zhao and targets the CAN J1939 protocol, it
fixes a potential deadlock by replacing the spinlock by an rwlock.
Oleksij Rempel's patch adds a missing spin_lock_bh() to prevent a
potential Use-After-Free in the CAN J1939's
setsockopt(SO_J1939_FILTER).
Maxime Jayat contributes a patch to fix the transceiver delay
compensation (TDCO) calculation, which is needed for higher CAN-FD bit
rates (usually 2Mbit/s).
* tag 'linux-can-fixes-for-6.8-20240214' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: netlink: Fix TDCO calculation using the old data bittiming
can: j1939: Fix UAF in j1939_sk_match_filter during setsockopt(SO_J1939_FILTER)
can: j1939: prevent deadlock by changing j1939_socks_lock to rwlock
====================
Link: https://lore.kernel.org/r/20240214140348.2412776-1-mkl@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Avoid unnecessary pollution of the global symbol namespace by
moving library functions in to a specific namespace and import
that into the drivers that make use of the functions.
For more info: https://lwn.net/Articles/760045/
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Do not imply that some of the generic headers may be always included.
Instead, include explicitly what we are direct user of.
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
kstrtox() may return different error codes.
Unshadow them in the ->store() callback to give better error report.
While at it, add missing kstrtox.h inclusion.
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The absence of decrementation of linedisp_id is incorrect in two ways,
i.e. it may cause:
- an ID exhaustion
- (and if the above is addressed) a duplicate id number may be allocated
next time a device is added
Replace above mentioned approach by using IDA framework.
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Now that we're setting driver_data using dev_set_drvdata(), we can use
dev_get_drvdata() for accessing it.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240212130247.9985-6-raag.jadav@intel.com
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Lowlevel driver callbacks are not supposed to use the consumer API
functions. Currently this works, but with the upcoming locking changes
this maybe results in dead locks. So directly access pwm->state.
Link: https://lore.kernel.org/r/20240126101624.2056801-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Lowlevel driver callbacks are not supposed to use the consumer API
functions. Currently this works, but with the upcoming locking changes
this probably results in dead locks.
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Link: https://lore.kernel.org/r/20240129085627.2386470-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
This moves the functions called by pwm consumers above the functions
called by pwm providers. When character device support is added later
this is hooked into the chip registration functions. As the needed
callbacks are a kind of consumer and make use of the consumer functions,
having this order is more natural and prevents having to add
declarations for static functions.
Also move the global variables for pwm tables to the respective
functions to have them properly grouped.
Link: https://lore.kernel.org/r/eed83de07bdfb69b5ceba0b9aed757ee612dea8f.1706182805.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Convert the PXA PWM binding file from TXT to YAML.
The original binding does not mention any clocks, but the PWM controller
will not probe without a clock.
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240107-pxa-pwm-yaml-v3-1-92ac90911c3f@skole.hr
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
The struct never had a member called clk_freq. This fixes the W=1
warning:
drivers/pwm/pwm-mediatek.c:60: warning: Excess struct member 'clk_freq' description in 'pwm_mediatek_chip'
Fixes: efecdeb82f ("pwm: mediatek: Allocate the clks array dynamically")
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240125085649.1571268-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Apart from the two of_xlate implementations this member is write-only.
In the of_xlate functions of_pwm_xlate_with_flags() and
of_pwm_single_xlate() it's more sensible to check for args->args_count
because this is what is actually used in the device tree.
Acked-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/53d8c545aa8f79a920358be9e72e382b3981bdc4.1704835845.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Since we don't have runtime PM handles here, we should be using
pm_sleep_ptr() macro, so that the compiler can discard it in case
CONFIG_PM_SLEEP=n.
Fixes: 30b5b066fa ("pwm: dwc: Use DEFINE_SIMPLE_DEV_PM_OPS for PM functions")
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240212130247.9985-2-raag.jadav@intel.com
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
While there is no issue currently with the resources allocation,
the code may still be made more robust by deallocating message
in the ->release() callback.
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>