Add a generic setter for the EEE tx idle timer and use it with all
RTL8125/RTL8126 chip versions, in line with the vendor driver.
This prepares for adding EEE tx idle timer support for additional
chip versions.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/39beed72-0dc4-4c45-8899-b72c43ab62a7@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This adds LED support for RTL8125/RTL8126.
Note: Due to missing datasheets changing the 5Gbps link mode isn't
supported for RTL8126.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/f982602c-9de3-4ca6-85a3-2c1d118dcb15@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As BPF applications grow in size and complexity and are separated into
multiple .bpf.c files that are statically linked together, it becomes
harder and harder to match verifier's BPF assembly level output to
original C code. While often annotated C source code is unique enough to
be able to identify the file it belongs to, quite often this is actually
problematic as parts of source code can be quite generic.
Long story short, it is very useful to see source code file name and
line number information along with the original C code. Verifier already
knows this information, we just need to output it.
This patch extends verifier log with file name and line number
information, emitted next to original (presumably C) source code,
annotating BPF assembly output, like so:
; <original C code> @ <filename>.bpf.c:<line>
If file name has directory names in it, they are stripped away. This
should be fine in practice as file names tend to be pretty unique with
C code anyways, and keeping log size smaller is always good.
In practice this might look something like below, where some code is
coming from application files, while others are from libbpf's usdt.bpf.h
header file:
; if (STROBEMETA_READ( @ strobemeta_probe.bpf.c:534
5592: (79) r1 = *(u64 *)(r10 -56) ; R1_w=mem_or_null(id=1589,sz=7680) R10=fp0
5593: (7b) *(u64 *)(r10 -56) = r1 ; R1_w=mem_or_null(id=1589,sz=7680) R10=fp0
5594: (79) r3 = *(u64 *)(r10 -8) ; R3_w=scalar() R10=fp0 fp-8=mmmmmmmm
...
170: (71) r1 = *(u8 *)(r8 +15) ; frame1: R1_w=scalar(...) R8_w=map_value(map=__bpf_usdt_spec,ks=4,vs=208)
171: (67) r1 <<= 56 ; frame1: R1_w=scalar(...)
172: (c7) r1 s>>= 56 ; frame1: R1_w=scalar(smin=smin32=-128,smax=smax32=127)
; val <<= arg_spec->arg_bitshift; @ usdt.bpf.h:183
173: (67) r1 <<= 32 ; frame1: R1_w=scalar(...)
174: (77) r1 >>= 32 ; frame1: R1_w=scalar(smin=0,smax=umax=0xffffffff,var_off=(0x0; 0xffffffff))
175: (79) r2 = *(u64 *)(r10 -8) ; frame1: R2_w=scalar() R10=fp0 fp-8=mmmmmmmm
176: (6f) r2 <<= r1 ; frame1: R1_w=scalar(smin=0,smax=umax=0xffffffff,var_off=(0x0; 0xffffffff)) R2_w=scalar()
177: (7b) *(u64 *)(r10 -8) = r2 ; frame1: R2_w=scalar(id=61) R10=fp0 fp-8_w=scalar(id=61)
; if (arg_spec->arg_signed) @ usdt.bpf.h:184
178: (bf) r3 = r2 ; frame1: R2_w=scalar(id=61) R3_w=scalar(id=61)
179: (7f) r3 >>= r1 ; frame1: R1_w=scalar(smin=0,smax=umax=0xffffffff,var_off=(0x0; 0xffffffff)) R3_w=scalar()
; if (arg_spec->arg_signed) @ usdt.bpf.h:184
180: (71) r4 = *(u8 *)(r8 +14)
181: safe
log_fixup tests needed a minor adjustment as verifier log output
increased a bit and that test is quite sensitive to such changes.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240212235944.2816107-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
FEC_ENET_FCE is the Flow Control Enable bit (bit 5) of the RCR.
This is now defined as FEC_RCR_FLOWCTL.
Signed-off-by: Csókás Bence <csokas.bence@prolan.hu>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20240212153717.10023-2-csokas.bence@prolan.hu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add defines for bits of ECR, RCR control registers, TX watermark etc.
Signed-off-by: Csókás Bence <csokas.bence@prolan.hu>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20240212153717.10023-1-csokas.bence@prolan.hu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Andrii Nakryiko says:
====================
Fix global subprog PTR_TO_CTX arg handling
Fix confusing and incorrect inference of PTR_TO_CTX argument type in BPF
global subprogs. For some program types (iters, tracepoint, any program type
that doesn't have fixed named "canonical" context type) when user uses (in
a correct and valid way) a pointer argument to user-defined anonymous struct
type, verifier will incorrectly assume that it has to be PTR_TO_CTX argument.
While it should be just a PTR_TO_MEM argument with allowed size calculated
from user-provided (even if anonymous) struct.
This did come up in practice and was very confusing to users, so let's prevent
this going forward. We had to do a slight refactoring of
btf_get_prog_ctx_type() to make it easy to support a special s390x KPROBE use
cases. See details in respective patches.
v1->v2:
- special-case typedef bpf_user_pt_regs_t handling for KPROBE programs,
fixing s390x after changes in patch #2.
====================
Link: https://lore.kernel.org/r/20240212233221.2575350-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
For program types that don't have named context type name (e.g., BPF
iterator programs or tracepoint programs), ctx_tname will be a non-NULL
empty string. For such programs it shouldn't be possible to have
PTR_TO_CTX argument for global subprogs based on type name alone.
arg:ctx tag is the only way to have PTR_TO_CTX passed into global
subprog for such program types.
Fix this loophole, which currently would assume PTR_TO_CTX whenever
user uses a pointer to anonymous struct as an argument to their global
subprogs. This happens in practice with the following (quite common, in
practice) approach:
typedef struct { /* anonymous */
int x;
} my_type_t;
int my_subprog(my_type_t *arg) { ... }
User's intent is to have PTR_TO_MEM argument for `arg`, but verifier
will complain about expecting PTR_TO_CTX.
This fix also closes unintended s390x-specific KPROBE handling of
PTR_TO_CTX case. Selftest change is necessary to accommodate this.
Fixes: 91cc1a9974 ("bpf: Annotate context types")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240212233221.2575350-4-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Expected canonical argument type for global function arguments
representing PTR_TO_CTX is `bpf_user_pt_regs_t *ctx`. This currently
works on s390x by accident because kernel resolves such typedef to
underlying struct (which is anonymous on s390x), and erroneously
accepting it as expected context type. We are fixing this problem next,
which would break s390x arch, so we need to handle `bpf_user_pt_regs_t`
case explicitly for KPROBE programs.
Fixes: 91cc1a9974 ("bpf: Annotate context types")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240212233221.2575350-3-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Return result of btf_get_prog_ctx_type() is never used and callers only
check NULL vs non-NULL case to determine if given type matches expected
PTR_TO_CTX type. So rename function to `btf_is_prog_ctx_type()` and
return a simple true/false. We'll use this simpler interface to handle
kprobe program type's special typedef case in the next patch.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240212233221.2575350-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Eric Dumazet says:
====================
net: adopt netdev_lockdep_set_classes()
Instead of waiting for syzbot to discover lockdep false positives,
make sure we use netdev_lockdep_set_classes() a bit more.
====================
Link: https://lore.kernel.org/r/20240212140700.2795436-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
br_set_lockdep_class() is missing many details.
Use generic netdev_lockdep_set_classes() to not worry anymore.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240212140700.2795436-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
vlan uses vlan_dev_set_lockdep_class() which lacks qdisc_tx_busylock
initialization.
Use generic netdev_lockdep_set_classes() to not worry anymore.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240212140700.2795436-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Adopt net->dev_by_index as I did in commit 0e0939c0ad
("net-procfs: use xarray iterator to implement /proc/net/dev")
Not only this removes quadratic behavior, it also makes sure
an existing vlan device is always visible in the dump,
regardless of concurrent net->dev_base_head changes.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20240211214404.1882191-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This prevents going emergency read only when the user has specified
replicas_required > replicas.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
clang-16 warns about casting functions to incompatible types, as is done
here to call clk_disable_unprepare:
sound/soc/meson/t9015.c:274:4: error: cast from 'void (*)(struct clk *)' to 'void (*)(void *)' converts to incompatible function type [-Werror,-Wcast-function-type-strict]
274 | (void(*)(void *))clk_disable_unprepare,
The pattern of getting, enabling and setting a disable callback for a
clock can be replaced with devm_clk_get_enabled(), which also fixes
this warning.
Fixes: 33901f5b9b ("ASoC: meson: add t9015 internal DAC driver")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Justin Stitt <justinstitt@google.com>
Link: https://msgid.link/r/20240213215807.3326688-3-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
clang-16 warns about casting functions to incompatible types, as is done
here to call clk_disable_unprepare:
sound/soc/meson/aiu.c:243:12: error: cast from 'void (*)(struct clk *)' to 'void (*)(void *)' converts to incompatible function type [-Werror,-Wcast-function-type-strict]
243 | (void(*)(void *))clk_disable_unprepare,
The pattern of getting, enabling and setting a disable callback for a
clock can be replaced with devm_clk_get_enabled(), which also fixes
this warning.
Fixes: 6ae9ca9ce9 ("ASoC: meson: aiu: add i2s and spdif support")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Justin Stitt <justinstitt@google.com>
Link: https://msgid.link/r/20240213215807.3326688-2-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove superfluous initialization of status variable in
nvmet_execute_admin_connect() and nvmet_execute_io_connect(), since it
will get overwritten by nvmet_copy_from_sgl().
Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Originally, this patch removed a redundant check in
BPF_CGROUP_RUN_PROG_INET_EGRESS, as the check was already being done in
the function it called, __cgroup_bpf_run_filter_skb. For v2, it was
reccomended that I remove the check from __cgroup_bpf_run_filter_skb,
and add the checks to the other macro that calls that function,
BPF_CGROUP_RUN_PROG_INET_INGRESS.
To sum it up, checking that the socket exists and that it is a full
socket is now part of both macros BPF_CGROUP_RUN_PROG_INET_EGRESS and
BPF_CGROUP_RUN_PROG_INET_INGRESS, and it is no longer part of the
function they call, __cgroup_bpf_run_filter_skb.
v3->v4: Fixed weird merge conflict.
v2->v3: Sent to bpf-next instead of generic patch
v1->v2: Addressed feedback about where check should be removed.
Signed-off-by: Oliver Crumrine <ozlinuxc@gmail.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/7lv62yiyvmj5a7eozv2iznglpkydkdfancgmbhiptrgvgan5sy@3fl3onchgdz3
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Kui-Feng Lee says:
====================
Allow passing null pointers to the operators provided by a struct_ops
object. This is an RFC to collect feedbacks/opinions.
The function pointers that are passed to struct_ops operators (the function
pointers) are always considered reliable until now. They cannot be
null. However, in certain scenarios, it should be possible to pass null
pointers to these operators. For instance, sched_ext may pass a null
pointer in the struct task type to an operator that is provided by its
struct_ops objects.
The proposed solution here is to add PTR_MAYBE_NULL annotations to
arguments and create instances of struct bpf_ctx_arg_aux (arg_info) for
these arguments. These arg_infos will be installed at
prog->aux->ctx_arg_info and will be checked by the BPF verifier when
loading the programs. When a struct_ops program accesses arguments in the
ctx, the verifier will call btf_ctx_access() (through
bpf_verifier_ops->is_valid_access) to verify the access. btf_ctx_access()
will check arg_info and use the information of the matched arg_info to
properly set reg_type.
For nullable arguments, this patch sets an arg_info to label them with
PTR_TO_BTF_ID | PTR_TRUSTED | PTR_MAYBE_NULL. This enforces the verifier to
check programs and ensure that they properly check the pointer. The
programs should check if the pointer is null before reading/writing the
pointed memory.
The implementer of a struct_ops should annotate the arguments that can
be null. The implementer should define a stub function (empty) as a
placeholder for each defined operator. The name of a stub function
should be in the pattern "<st_op_type>__<operator name>". For example,
for test_maybe_null of struct bpf_testmod_ops, it's stub function name
should be "bpf_testmod_ops__test_maybe_null". You mark an argument
nullable by suffixing the argument name with "__nullable" at the stub
function. Here is the example in bpf_testmod.c.
static int bpf_testmod_ops__test_maybe_null(int dummy,
struct task_struct *task__nullable)
{
return 0;
}
This means that the argument 1 (2nd) of bpf_testmod_ops->test_maybe_null,
which is a function pointer that can be null. With this annotation, the
verifier will understand how to check programs using this arguments. A BPF
program that implement test_maybe_null should check the pointer to make
sure it is not null before using it. For example,
if (task__nullable)
save_tgid = task__nullable->tgid
Without the check, the verifier will reject the program.
Since we already has stub functions for kCFI, we just reuse these stub
functions with the naming convention mentioned earlier. These stub
functions with the naming convention is only required if there are nullable
arguments to annotate. For functions without nullable arguments, stub
functions are not necessary for the purpose of this patch.
---
Major changes from v7:
- Update a comment that is out of date.
Major changes from v6:
- Remove "len" from bpf_struct_ops_desc_release().
- Rename arg_info(s) to info, and rename all_arg_info to arg_info in
prepare_arg_info().
- Rename arg_info to info in struct bpf_struct_ops_arg_info.
Major changes from v5:
- Rename all member_arg_info variables.
- Refactor to bpf_struct_ops_desc_release() to share code
between btf_free_struct_ops_tab() and bpf_struct_ops_desc_init().
- Refactor to btf_param_match_suffix(). (Add a new patch as the part 2.)
- Clean up the commit log and remaining code in the patch of test cases.
- Update a comment in struct_ops_maybe_null.c.
Major changes from v4:
- Remove the support of pointers to types other than struct
types. That would be a separate patchset.
- Remove the patch about extending PTR_TO_BTF_ID.
- Remove the test against various pointer types from selftests.
- Remove the patch "bpf: Remove an unnecessary check" and send that
patch separately.
- Remove member_arg_info_cnt from struct bpf_struct_ops_desc.
- Use btf_id from FUNC_PROTO of a function pointer instead of a stub
function.
Major changes from v3:
- Move the code collecting argument information to prepare_arg_info()
called in the loop in bpf_struct_ops_desc_init().
- Simplify the memory allocation by having separated arg_info for
each member of a struct_ops type.
- Extend PTR_TO_BTF_ID to pointers to scalar types and array types,
not only to struct types.
Major changes from v2:
- Remove dead code.
- Add comments to explain the code itself.
Major changes from v1:
- Annotate arguments by suffixing argument names with "__nullable" at
stub functions.
v7: https://lore.kernel.org/all/20240209020053.1132710-1-thinker.li@gmail.com/
v6: https://lore.kernel.org/all/20240208065103.2154768-1-thinker.li@gmail.com/
v5: https://lore.kernel.org/all/20240206063833.2520479-1-thinker.li@gmail.com/
v4: https://lore.kernel.org/all/20240202220516.1165466-1-thinker.li@gmail.com/
v3: https://lore.kernel.org/all/20240122212217.1391878-1-thinker.li@gmail.com/
v2: https://lore.kernel.org/all/20240118224922.336006-1-thinker.li@gmail.com/
====================
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Test if the verifier verifies nullable pointer arguments correctly for BPF
struct_ops programs.
"test_maybe_null" in struct bpf_testmod_ops is the operator defined for the
test cases here.
A BPF program should check a pointer for NULL beforehand to access the
value pointed by the nullable pointer arguments, or the verifier should
reject the programs. The test here includes two parts; the programs
checking pointers properly and the programs not checking pointers
beforehand. The test checks if the verifier accepts the programs checking
properly and rejects the programs not checking at all.
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Link: https://lore.kernel.org/r/20240209023750.1153905-5-thinker.li@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Collect argument information from the type information of stub functions to
mark arguments of BPF struct_ops programs with PTR_MAYBE_NULL if they are
nullable. A nullable argument is annotated by suffixing "__nullable" at
the argument name of stub function.
For nullable arguments, this patch sets a struct bpf_ctx_arg_aux to label
their reg_type with PTR_TO_BTF_ID | PTR_TRUSTED | PTR_MAYBE_NULL. This
makes the verifier to check programs and ensure that they properly check
the pointer. The programs should check if the pointer is null before
accessing the pointed memory.
The implementer of a struct_ops type should annotate the arguments that can
be null. The implementer should define a stub function (empty) as a
placeholder for each defined operator. The name of a stub function should
be in the pattern "<st_op_type>__<operator name>". For example, for
test_maybe_null of struct bpf_testmod_ops, it's stub function name should
be "bpf_testmod_ops__test_maybe_null". You mark an argument nullable by
suffixing the argument name with "__nullable" at the stub function.
Since we already has stub functions for kCFI, we just reuse these stub
functions with the naming convention mentioned earlier. These stub
functions with the naming convention is only required if there are nullable
arguments to annotate. For functions having not nullable arguments, stub
functions are not necessary for the purpose of this patch.
This patch will prepare a list of struct bpf_ctx_arg_aux, aka arg_info, for
each member field of a struct_ops type. "arg_info" will be assigned to
"prog->aux->ctx_arg_info" of BPF struct_ops programs in
check_struct_ops_btf_id() so that it can be used by btf_ctx_access() later
to set reg_type properly for the verifier.
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Link: https://lore.kernel.org/r/20240209023750.1153905-4-thinker.li@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Move __kfunc_param_match_suffix() to btf.c and rename it as
btf_param_match_suffix(). It can be reused by bpf_struct_ops later.
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Link: https://lore.kernel.org/r/20240209023750.1153905-3-thinker.li@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Merge the mmc fixes for v6.8-rc[n] into the next branch, to allow them to
get tested together with the new mmc changes that are targeted for v6.9.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Initializing an eMMC that's connected via a 1-bit bus is current failing,
if the HW (DT) informs that 4-bit bus is supported. In fact this is a
regression, as we were earlier capable of falling back to 1-bit mode, when
switching to 4/8-bit bus failed. Therefore, let's restore the behaviour.
Log for Samsung eMMC 5.1 chip connected via 1bit bus (only D0 pin)
Before patch:
[134509.044225] mmc0: switch to bus width 4 failed
[134509.044509] mmc0: new high speed MMC card at address 0001
[134509.054594] mmcblk0: mmc0:0001 BGUF4R 29.1 GiB
[134509.281602] mmc0: switch to bus width 4 failed
[134509.282638] I/O error, dev mmcblk0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[134509.282657] Buffer I/O error on dev mmcblk0, logical block 0, async page read
[134509.284598] I/O error, dev mmcblk0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[134509.284602] Buffer I/O error on dev mmcblk0, logical block 0, async page read
[134509.284609] ldm_validate_partition_table(): Disk read failed.
[134509.286495] I/O error, dev mmcblk0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[134509.286500] Buffer I/O error on dev mmcblk0, logical block 0, async page read
[134509.288303] I/O error, dev mmcblk0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[134509.288308] Buffer I/O error on dev mmcblk0, logical block 0, async page read
[134509.289540] I/O error, dev mmcblk0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[134509.289544] Buffer I/O error on dev mmcblk0, logical block 0, async page read
[134509.289553] mmcblk0: unable to read partition table
[134509.289728] mmcblk0boot0: mmc0:0001 BGUF4R 31.9 MiB
[134509.290283] mmcblk0boot1: mmc0:0001 BGUF4R 31.9 MiB
[134509.294577] I/O error, dev mmcblk0, sector 0 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2
[134509.295835] I/O error, dev mmcblk0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[134509.295841] Buffer I/O error on dev mmcblk0, logical block 0, async page read
After patch:
[134551.089613] mmc0: switch to bus width 4 failed
[134551.090377] mmc0: new high speed MMC card at address 0001
[134551.102271] mmcblk0: mmc0:0001 BGUF4R 29.1 GiB
[134551.113365] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21
[134551.114262] mmcblk0boot0: mmc0:0001 BGUF4R 31.9 MiB
[134551.114925] mmcblk0boot1: mmc0:0001 BGUF4R 31.9 MiB
Fixes: 577fb13199 ("mmc: rework selection of bus speed mode")
Cc: stable@vger.kernel.org
Signed-off-by: Ivan Semenov <ivan@semenov.dev>
Link: https://lore.kernel.org/r/20240206172845.34316-1-ivan@semenov.dev
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
xsk_build_skb() allocates a page and adds it to the skb via
skb_add_rx_frag() and specifies 0 for truesize. This leads to a warning
in skb_add_rx_frag() with CONFIG_DEBUG_NET enabled because size is
larger than truesize.
Increasing truesize requires to add the same amount to socket's
sk_wmem_alloc counter in order not to underflow the counter during
release in the destructor (sock_wfree()).
Pass the size of the allocated page as truesize to skb_add_rx_frag().
Add this mount to socket's sk_wmem_alloc counter.
Fixes: cf24f5a5fe ("xsk: add support for AF_XDP multi-buffer on Tx path")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20240202163221.2488589-1-bigeasy@linutronix.de
Counts were switched from the scaled saved value form to the
aggregated count to avoid double accounting. When this happened the
removing of scaling for a count should have been removed, however, it
wasn't and this wasn't observed as it normally doesn't matter because
a counter's scale is 1. A problem was observed with RAPL events that
are scaled.
Fixes: 37cc8ad77c ("perf metric: Directly use counts rather than saved_value")
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: James Clark <james.clark@arm.com>
Cc: Kaige Ye <ye@kaige.org>
Cc: John Garry <john.g.garry@oracle.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240209204947.3873294-5-irogers@google.com
Cycles is recognized as part of a hard coded metric in stat-shadow.c,
it may call print_metric_only with a NULL fmt string leading to a
segfault. Handle the NULL fmt explicitly.
Fixes: 088519f318 ("perf stat: Move the display functions to stat-display.c")
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: James Clark <james.clark@arm.com>
Cc: Kaige Ye <ye@kaige.org>
Cc: John Garry <john.g.garry@oracle.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240209204947.3873294-4-irogers@google.com
Events in metrics cannot use '/' as a separator, it would be
recognized as a divide, so they use '@'. The '@' is recognized in the
metricgroups code and changed to '/', do the same in the has_event
function so that the parsing is only tried without the @s.
Fixes: 4a4a9bf907 ("perf expr: Add has_event function")
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: James Clark <james.clark@arm.com>
Cc: Kaige Ye <ye@kaige.org>
Cc: John Garry <john.g.garry@oracle.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240209204947.3873294-3-irogers@google.com
Currently only floating point numbers can be parsed, add a special
case for NaN.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: James Clark <james.clark@arm.com>
Cc: Kaige Ye <ye@kaige.org>
Cc: John Garry <john.g.garry@oracle.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240209204947.3873294-2-irogers@google.com
Change "regoff" to "base_offset" in 2 places in the kernel-doc comments to
prevent warnings:
insn-eval.c:1152: warning: Function parameter or member 'base_offset' not described in 'get_eff_addr_sib'
insn-eval.c:1152: warning: Excess function parameter 'regoff' description in 'get_eff_addr_sib'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240211062452.16411-1-rdunlap@infradead.org
Due to a bug in GuC firmware, Mesa can't enable by default the usage of
compute engines in DG2 and newer.
A new GuC firmware fixed the issue but until now there was no way
for Mesa to know if KMD was running with the fixed GuC version or not,
so this uAPI is required.
It may be expanded in future to query other firmware versions too.
This is querying XE_UC_FW_VER_COMPATIBILITY/submission version because
that is also supported by VFs, while XE_UC_FW_VER_RELEASE don't.
i915 uAPI: https://patchwork.freedesktop.org/series/129627/
Mesa usage: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25233
v2:
- fixed drm_xe_query_uc_fw_version documentation
- moved branch_ver as the first version number
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Francois Dugast <francois.dugast@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240208183539.185095-1-jose.souza@intel.com
Domain id is acquired differently depending on CPU. AMD tests use id
from L3 cache, whereas CPUs from other vendors base the id on topology
package id. In order to support L2 CAT test, this has to be
generalized.
The driver side code seems to get the domain ids from cache ids so the
approach used by the AMD branch seems to match the kernel-side code. It
will also work with L2 domain IDs as long as the cache level is
generalized.
Using the topology id was always fragile due to mismatch with the
kernel-side way to acquire the domain id. It got incorrect domain id,
e.g., when Cluster-on-Die (CoD) is enabled for CPU (but CoD is not well
suited for resctrl in the first place so it has not been a big issue if
tests don't work correctly with it).
Taking all the above into account, generalize acquiring the domain id
by taking it from the cache id and do not hard-code the cache level.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Kernel-side calls the instances of a resource domains.
Change the resource_id naming in the selftest code to domain_id to
match the kernel side better.
Suggested-by: Maciej Wieczór-Retman <maciej.wieczor-retman@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
"L2"/"L3" conversion to integer is embedded into get_cache_size()
which prevents reuse.
Create a helper for the cache string to integer conversion to make
it reusable.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
write_schemata() takes the test name as an argument and determines the
relevant resource based on the test name. Such mapping from name to
resource does not really belong to resctrlfs.c that should provide
only generic, test-independent functions.
Pass the resource stored in the test information structure to
write_schemata() instead of the test name. The new API is also more
flexible as it enables to use write_schemata() for more than one
resource within a test.
While touching the sprintf(), move the unnecessary %c that is always
'=' directly into the format string.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Each test currently has a "run test" function in per test file and
another resctrl_tests.c. The functions in resctrl_tests.c are almost
identical.
Generalize the one in resctrl_tests.c such that it can be shared
between all of the tests. It makes adding new tests easier and removes
the per test if () forests.
Also add comment to CPU vendor IDs that they must be defined as bits
for a bitmask.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
resctrl_tests reads a set of parameters and passes them individually
for each tests which causes variations in the call signature between
the tests.
Add struct input_params to hold all input parameters. It can be easily
passed to every test without varying the call signature.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
CAT test does not reset the CPU affinity after the benchmark.
This is relatively harmless as is because CAT test is the last
benchmark to run, however, more tests may be added later.
Store the CPU affinity the first time taskset_benchmark() is run and
add taskset_restore() which the test can call to reset the CPU mask to
its original value.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
CAT test spawns two processes into two different control groups with
exclusive schemata. Both the processes alloc a buffer from memory
matching their allocated LLC block size and flush the entire buffer out
of caches. Since the processes are reading through the buffer only once
during the measurement and initially all the buffer was flushed, the
test isn't testing CAT.
Rewrite the CAT test to allocate a buffer sized to half of LLC. Then
perform a sequence of tests with different LLC alloc sizes starting
from half of the CBM bits down to 1-bit CBM. Flush the buffer before
each test and read the buffer twice. Observe the LLC misses on the
second read through the buffer. As the allocated LLC block gets smaller
and smaller, the LLC misses will become larger and larger giving a
strong signal on CAT working properly.
The new CAT test is using only a single process because it relies on
measured effect against another run of itself rather than another
process adding noise. The rest of the system is set to use the CBM bits
not used by the CAT test to keep the test isolated.
Replace count_bits() with count_contiguous_bits() to get the first bit
position in order to be able to calculate masks based on it.
This change has been tested with a number of systems from different
generations.
Suggested-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
When reading memory in order, HW prefetching optimizations will
interfere with measuring how caches and memory are being accessed. This
adds noise into the results.
Change the fill_buf reading loop to not use an obvious in-order access
using multiply by a prime and modulo.
Using a prime multiplier with modulo ensures the entire buffer is
eventually read. 23 is small enough that the reads are spread out but
wrapping does not occur very frequently (wrapping too often can trigger
L2 hits more frequently which causes noise to the test because getting
the data from LLC is not required).
It was discovered that not all primes work equally well and some can
cause wildly unstable results (e.g., in an earlier version of this
patch, the reads were done in reversed order and 59 was used as the
prime resulting in unacceptably high and unstable results in MBA and
MBM test on some architectures).
Link: https://lore.kernel.org/linux-kselftest/TYAPR01MB6330025B5E6537F94DA49ACB8B499@TYAPR01MB6330.jpnprd01.prod.outlook.com/
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The fill_buf code prevents compiler optimizating the entire read loop
away by writing the final value of the variable into a file. While it
achieves the goal, writing into a file requires significant amount of
work within the innermost test loop and also error handling.
A simpler approach is to take advantage of volatile. Writing through
a pointer to a volatile variable is enough to prevent compiler from
optimizing the write away, and therefore compiler cannot remove the
read loop either.
Add a volatile 'value_sink' into resctrl_tests.c and make fill_buf to
write into it. As a result, the error handling in fill_buf.c can be
simplified.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Perf fd (pe_fd) is opened, reset, and enabled during every test the CAT
selftest runs. Also, ioctl(pe_fd, ...) calls are not error checked even
if ioctl() could return an error.
Open perf fd only once before the tests and only reset and enable the
counter within the test loop. Add error checking to pe_fd ioctl()
calls.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The main CAT test function is called cat_val() and resides in cache.c
which is illogical.
Rename the function to cat_test() and move it into cat_test.c.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>