Paolo Abeni says:
====================
selftests: net: more pmtu.sh fixes
The mentioned test is still flaky, unusally enough in 'fast'
environments.
Patch 2/2 [try to] address the existing issues, while patch 1/2
introduces more strict tests for the existing net helpers, to hopefully
prevent future pain.
====================
Link: https://lore.kernel.org/r/cover.1707731086.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The netdev CI is reporting failures for the pmtu test:
[ 115.929264] br0: port 2(vxlan_a) entered forwarding state
# 2024/02/08 17:33:22 socat[7871] E bind(7, {AF=10 [0000:0000:0000:0000:0000:0000:0000:0000]:50000}, 28): Address already in use
# 2024/02/08 17:33:22 socat[7877] E write(7, 0x5598fb6ff000, 8192): Connection refused
# TEST: IPv6, bridged vxlan4: PMTU exceptions [FAIL]
# File size 0 mismatches exepcted value in locally bridged vxlan test
The root cause is apparently a socket created by a previous iteration
of the relevant loop still lasting in LAST_ACK state.
Note that even the file size check is racy, the receiver process dumping
the file could still be running in background
Allow the listener to bound on the same local port via SO_REUSEADDR and
collect file output file size only after the listener completion.
Fixes: 136a1b434b ("selftests: net: test vxlan pmtu exceptions with tcp")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/4f51c11a1ce7ca7a4dabd926cffff63dadac9ba1.1707731086.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The helper waiting for a listener port can match any socket whose
hexadecimal representation of source or destination addresses
matches that of the given port.
Additionally, any socket state is accepted.
All the above can let the helper return successfully before the
relevant listener is actually ready, with unexpected results.
So far I could not find any related failure in the netdev CI, but
the next patch is going to make the critical event more easily
reproducible.
Address the issue matching the port hex only vs the relevant socket
field and additionally checking the socket state for TCP sockets.
Fixes: 3bdd9fd29c ("selftests/net: synchronize udpgro tests' tx and rx connection")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/192b3dbc443d953be32991d1b0ca432bd4c65008.1707731086.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Devicetree binding maintainers expect the example DTS in a binding to
show the usage of only this one particular binding, without unrelated
device nodes.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240212150524.81819-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
Add to the list of schema contents expected keywords with their
explanation: additionalProperties and unevaluatedProperties.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240212150524.81819-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
Documentation/process/license-rules.rst and checkpatch expect the SPDX
identifier syntax for multiple licenses to use capital "OR". Correct it
to keep consistent format and avoid copy-paste issues.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240208105327.129159-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
SmartRG described itself as a CPE manufacturer and produced few home
network devices (e.g. wireless routers). Their SmartRG SR400ac router
(smartrg,sr400ac) is covered by in-Linux DT binding and DTS file.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240212140839.27150-1-zajec5@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>
Apparently on Qualcomm SM8550 and SM8650 the FastRPC compute callbacks
are DMA coherent:
sm8650-qrd.dtb: fastrpc: compute-cb@2: 'dma-coherent' does not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240212110827.59302-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
Kernel test robot reports sparse warning:
sparse warnings: (new ones prefixed by >>)
>> drivers/of/base.c:1337:73: sparse: sparse: incorrect type in initializer
(different base types) @@ expected restricted __be32 @@ got int @@
drivers/of/base.c:1337:73: sparse: expected restricted __be32
drivers/of/base.c:1337:73: sparse: got int
Thus, Make explicit conversions to mute warning(Although BE and LE are
exactly same in binary representation for 0/~0).
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202402042134.GEb3Bgwl-lkp@intel.com/
Signed-off-by: Dawei Li <dawei.li@shingroup.cn>
Link: https://lore.kernel.org/r/20240205024033.3572617-1-dawei.li@shingroup.cn
Signed-off-by: Rob Herring <robh@kernel.org>
Since commit d492cc2573 ("driver core: device.h: make struct
bus_type a const *"), the driver core can properly handle constant
struct bus_type, move the host1x_bus_type variable to be a constant
structure as well, placing it into read-only memory which can not be
modified at runtime.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240213-bus_cleanup-host1x-v1-1-54ec51b5d14f@marliere.net
The mentioned test is failing in slow environments:
# SO_TXTIME ipv4 clock monotonic
# ./so_txtime: recv: timeout: Resource temporarily unavailable
not ok 1 selftests: net: so_txtime.sh # exit=1
Tuning the tolerance in the test binary is error-prone and doomed
to failures is slow-enough environment.
Just resort to suppress any error in such cases. Note to suppress
them we need first to refactor a bit the code moving it to explicit
error handling.
Fixes: af5136f950 ("selftests/net: SO_TXTIME with ETF and FQ")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/2142d9ed4b5c5aa07dd1b455779625d91b175373.1707730902.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The gro self-tests sends the packets to be aggregated with
multiple write operations.
When running is slow environment, it's hard to guarantee that
the GRO engine will wait for the last packet in an intended
train.
The above causes almost deterministic failures in our CI for
the 'large' test-case.
Address the issue explicitly ignoring failures for such case
in slow environments (KSFT_MACHINE_SLOW==true).
Fixes: 7d1575014a ("selftests/net: GRO coalesce test")
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/97d3ba83f5a2bfeb36f6bc0fb76724eb3dafb608.1707729403.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
VF drivers can't operate on MCR registers. Make sure that driver
is not trying to read nor write using any of MCR register.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240213154355.1221-9-michal.wajdeczko@intel.com
It is PF driver responsibility to verify that LMEM was correctly
initialized, also VF drivers don't have access to GU_CNTL register.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240213154355.1221-6-michal.wajdeczko@intel.com
Since commit 28270e25c6 ("btrfs: always reserve space for delayed refs
when starting transaction") we started not only to reserve metadata space
for the delayed refs a caller of btrfs_start_transaction() might generate
but also to try to fully refill the delayed refs block reserve, because
there are several case where we generate delayed refs and haven't reserved
space for them, relying on the global block reserve. Relying too much on
the global block reserve is not always safe, and can result in hitting
-ENOSPC during transaction commits or worst, in rare cases, being unable
to mount a filesystem that needs to do orphan cleanup or anything that
requires modifying the filesystem during mount, and has no more
unallocated space and the metadata space is nearly full. This was
explained in detail in that commit's change log.
However the gap between the reserved amount and the size of the delayed
refs block reserve can be huge, so attempting to reserve space for such
a gap can result in allocating many metadata block groups that end up
not being used. After a recent patch, with the subject:
"btrfs: add new unused block groups to the list of unused block groups"
We started to add new block groups that are unused to the list of unused
block groups, to avoid having them around for a very long time in case
they are never used, because a block group is only added to the list of
unused block groups when we deallocate the last extent or when mounting
the filesystem and the block group has 0 bytes used. This is not a problem
introduced by the commit mentioned earlier, it always existed as our
metadata space reservations are, most of the time, pessimistic and end up
not using all the space they reserved, so we can occasionally end up with
one or two unused metadata block groups for a long period. However after
that commit mentioned earlier, we are just more pessimistic in the
metadata space reservations when starting a transaction and therefore the
issue is more likely to happen.
This however is not always enough because we might create unused metadata
block groups when reserving metadata space at a high rate if there's
always a gap in the delayed refs block reserve and the cleaner kthread
isn't triggered often enough or is busy with other work (running delayed
iputs, cleaning deleted roots, etc), not to mention the block group's
allocated space is only usable for a new block group after the transaction
used to remove it is committed.
A user reported that he's getting a lot of allocated metadata block groups
but the usage percentage of metadata space was very low compared to the
total allocated space, specially after running a series of block group
relocations.
So for now stop trying to refill the gap in the delayed refs block reserve
and reserve space only for the delayed refs we are expected to generate
when starting a transaction.
CC: stable@vger.kernel.org # 6.7+
Reported-by: Ivan Shapovalov <intelfx@intelfx.name>
Link: https://lore.kernel.org/linux-btrfs/9cdbf0ca9cdda1b4c84e15e548af7d7f9f926382.camel@intelfx.name/
Link: https://lore.kernel.org/linux-btrfs/CAL3q7H6802ayLHUJFztzZAVzBLJAGdFx=6FHNNy87+obZXXZpQ@mail.gmail.com/
Tested-by: Ivan Shapovalov <intelfx@intelfx.name>
Reported-by: Heddxh <g311571057@gmail.com>
Link: https://lore.kernel.org/linux-btrfs/CAE93xANEby6RezOD=zcofENYZOT-wpYygJyauyUAZkLv6XVFOA@mail.gmail.com/
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
At btrfs_load_block_group_zone_info() we never drop a reference on the
chunk map we have looked up, therefore leaking a reference on it. So
add the missing btrfs_free_chunk_map() at the end of the function.
Fixes: 7dc66abb5a ("btrfs: use a dedicated data structure for chunk maps")
Reported-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Tested-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently we allow an encoded write against inodes that have the NODATASUM
flag set, either because they are NOCOW files or they were created while
the filesystem was mounted with "-o nodatasum". This results in having
compressed extents without corresponding checksums, which is a filesystem
inconsistency reported by 'btrfs check'.
For example, running btrfs/281 with MOUNT_OPTIONS="-o nodatacow" triggers
this and 'btrfs check' errors out with:
[1/7] checking root items
[2/7] checking extents
[3/7] checking free space tree
[4/7] checking fs roots
root 256 inode 257 errors 1040, bad file extent, some csum missing
root 256 inode 258 errors 1040, bad file extent, some csum missing
ERROR: errors found in fs roots
(...)
So reject encoded writes if the target inode has NODATASUM set.
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently when doing a write to a file we always reserve metadata space
for inserting data checksums. However we don't need to do it if we have
a nodatacow file (-o nodatacow mount option or chattr +C) or if checksums
are disabled (-o nodatasum mount option), as in that case we are only
adding unnecessary pressure to metadata reservations.
For example on x86_64, with the default node size of 16K, a 4K buffered
write into a nodatacow file is reserving 655360 bytes of metadata space,
as it's accounting for checksums. After this change, which stops reserving
space for checksums if we have a nodatacow file or checksums are disabled,
we only need to reserve 393216 bytes of metadata.
CC: stable@vger.kernel.org # 6.1+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When updating all bits in AMIC control registers (mask 0xff), use more
obvious snd_soc_component_write(). Replace also hard-coded value 0x00
with a define.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20240202154134.66967-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Downstream driver configures DMIC clock rate through the divider
register but only parts of this code ended up in the upstream driver: we
always write the same value 0, so DIV2. Same default value is used also
for the AMIC rate control.
Let's make it obvious and drop unneeded parts of the code.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20240202154134.66967-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
New versions of VA Macro has soundwire integrated, so handle the soundwire npl
clock correctly in the codec driver.
Introduce has_npl_clk and handle the sm8550 case separately because
it has soundwire integrated but doesn't have an npl clock.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://msgid.link/r/20240203-topic-sm8x50-upstream-va-macro-npl-v2-1-f2db82ae3359@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
Hi,
Align the IPC4 firmware path/name and the topology path to the documentation:
default_fw_path: intel/sof-ipc4/{platform_name}
default_lib_path: intel/sof-ipc4-lib/{platform_name}
default_tplg_path: intel/sof-ipc4-tplg
default_fw_filename: sof-{platform_name}.ri
Tiger Lake and Lunar Lake support is not yet available via the official
firmware release, the paths can be changed now to avoid misalignment in the
future.
Regards,
Peter
---
Peter Ujfalusi (2):
ASoC: SOF: Intel: pci-tgl: Change the default paths and firmware names
ASoC: SOF: Intel: pci-lnl: Change the topology path to
intel/sof-ipc4-tplg
sound/soc/sof/intel/pci-lnl.c | 2 +-
sound/soc/sof/intel/pci-tgl.c | 64 +++++++++++++++++------------------
2 files changed, 33 insertions(+), 33 deletions(-)
--
2.43.0
tracer_tracing_is_on() checks whether record_disabled is not zero. This
checks both the record_disabled counter and the RB_BUFFER_OFF flag.
Reading the source it looks like this function should only check for
the RB_BUFFER_OFF flag. Therefore use ring_buffer_record_is_set_on().
This fixes spurious fails in the 'test for function traceon/off triggers'
test from the ftrace testsuite when the system is under load.
Link: https://lore.kernel.org/linux-trace-kernel/20240205065340.2848065-1-svens@linux.ibm.com
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Tested-By: Mete Durlu <meted@linux.ibm.com>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Commit a8b9cf62ad ("ftrace: Fix DIRECT_CALLS to use SAVE_REGS by
default") attempted to fix an issue with direct trampolines on x86, see
its description for details. However, it wrongly referenced the
HAVE_DYNAMIC_FTRACE_WITH_REGS config option and the problem is still
present.
Add the missing "CONFIG_" prefix for the logic to work as intended.
Link: https://lore.kernel.org/linux-trace-kernel/20240213132434.22537-1-petr.pavlu@suse.com
Fixes: a8b9cf62ad ("ftrace: Fix DIRECT_CALLS to use SAVE_REGS by default")
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
NVM Express TP4167 provides a way for controllers to report a relaxed
execution constraint. Specifically, it notifies of exclusivity for IO
vs. admin commands instead of grouping these together. If set, then we
don't need to freeze IO in order to execute that admin command. The
freezing distrupts IO processes, so it's nice to avoid that if the
controller tells us it's not necessary.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
The @codeaurora email domain's servers have been decommissioned for a
long while now, and any emails addressed there will bounce.
Asutosh has an entry in .mailmap pointing to a new address, but
MAINTAINERS still lists an old @codeaurora address. Update MAINTAINERS
to match .mailmap for anyone reading the file directly.
Ritesh appears to have changed jobs, but looks to be still active in the
community. Update Ritesh's address to the one used in recient community
postings. Also Ritesh has indicated their entry should be changed from
Maintainer (M:) to Reviewer (R:) so make that update while we are making
changes to the entry.
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Acked-by: Ritesh Harjani <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20240209160934.3866475-1-quic_jhugo@quicinc.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Use existing typedef for dma_filter_fn to avoid duplicating type
definition.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20240208202137.630281-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Underscores should not be used in node names (dtc with W=2 warns about
them), so replace them with hyphens.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
RTLA:
- rtla tools are exiting with a positive value when usage()
is called. Make them return 0 if the usage was called via
-h/--help.
- the -P priority sets the sched priority for rtla workload.
When the SCHED_OTHER scheduler is selected, it sets
the rt_priority instead of the nice parameter. Setting
the nice value is the correct thing, so fix it.
- rtla is failing to compile with clang due to unsupported
options from gcc. Adjusting the compiler/linker options
makes clang work properly.
- Remove the sched_getattr() unused function on utils.c.
- Fixes on variable initialization and size, reported by
clang.
Verification:
- rv is failing to compile with clang due to unsupported
options from gcc. Adjusting the compiler/linker options
makes clang work properly.
- Fix an uninitialized variable on in_kernel.c reported by
clang.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZcqUCBQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qqKhAQC3pwQVHHZAcuORk31E4gDm0jOyZTXx
lJ/oGDp7T4qI+wEA5t4FxKxY05Vh1DIfYR7A06h7Uv+v7C8hpw/40f+mcw0=
=/tZD
-----END PGP SIGNATURE-----
Merge tag 'trace-tools-v6.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing tooling fixes from Steven Rostedt:
"RTLA:
- rtla tools are exiting with a positive value when usage() is
called. Make them return 0 if the usage was called via -h/--help
- the -P priority sets the sched priority for rtla workload. When the
SCHED_OTHER scheduler is selected, it sets the rt_priority instead
of the nice parameter. Setting the nice value is the correct thing,
so fix it
- rtla is failing to compile with clang due to unsupported options
from gcc. Adjusting the compiler/linker options makes clang work
properly
- Remove the sched_getattr() unused function on utils.c
- Fixes for variable initialization and size, reported by clang
Verification:
- rv is failing to compile with clang due to unsupported options from
gcc. Adjusting the compiler/linker options makes clang work
properly
- Fix an uninitialized variable on in_kernel.c reported by clang"
* tag 'trace-tools-v6.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tools/rtla: Exit with EXIT_SUCCESS when help is invoked
tools/rtla: Replace setting prio with nice for SCHED_OTHER
tools/rv: Fix curr_reactor uninitialized variable
tools/rv: Fix Makefile compiler options for clang
tools/rtla: Remove unused sched_getattr() function
tools/rtla: Fix clang warning about mount_point var size
tools/rtla: Fix uninitialized bucket/data->bucket_size warning
tools/rtla: Fix Makefile compiler options for clang
The 'phandle-array' type is a bit ambiguous. It can be either just an
array of phandles or an array of phandles plus args. "samsung,sysreg" is
the latter and needs to be constrained to a single entry with a phandle and
offset.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240124190733.1554314-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Add support for Arrow Lake platform to the RAPL common driver.
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add support for Lunar Lake-M platform to the RAPL common driver.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Only domain root packages can enumerate System (Psys) domain.
Whether a package is domain root or not is described in the Bit 0 of the
Domain Info register.
Add support for Domain Info register and fix the System domain probing
accordingly.
Fixes: 9eef7f9da9 ("powercap: intel_rapl: Introduce RAPL TPMI interface driver")
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Cc: 6.5+ <stable@vger.kernel.org> # 6.5+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add the missing Domain Info register. This also fixes the bogus
definition of the Interrupt register.
Neither of these two registers was used previously.
Fixes: 9eef7f9da9 ("powercap: intel_rapl: Introduce RAPL TPMI interface driver")
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Cc: 6.5+ <stable@vger.kernel.org> # 6.5+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The RAPL framework uses CPU hotplug locking to protect the rapl_packages
list and rp->lead_cpu to guarantee that
1. the RAPL package device is not unprobed and freed
2. the cached rp->lead_cpu is always valid
for operations like powercap sysfs accesses.
Current RAPL APIs assume being called from CPU hotplug callbacks which
hold the CPU hotplug lock, but TPMI RAPL driver invokes the APIs in the
driver's .probe() function without acquiring the CPU hotplug lock.
Fix the problem by providing both locked and lockless versions of RAPL
APIs.
Fixes: 9eef7f9da9 ("powercap: intel_rapl: Introduce RAPL TPMI interface driver")
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Cc: 6.5+ <stable@vger.kernel.org> # 6.5+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
A NULL pointer dereference is triggered when probing the MMIO RAPL
driver on platforms with CPU ID not listed in intel_rapl_common CPU
model list.
This is because the intel_rapl_common module still probes on such
platforms even if 'defaults_msr' is not set after commit 1488ac990a
("powercap: intel_rapl: Allow probing without CPUID match"). Thus the
MMIO RAPL rp->priv->defaults is NULL when registering to RAPL framework.
Fix the problem by adding sanity check to ensure rp->priv->rapl_defaults
is always valid.
Fixes: 1488ac990a ("powercap: intel_rapl: Allow probing without CPUID match")
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Cc: 6.5+ <stable@vger.kernel.org> # 6.5+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
clang-16 points out a control flow integrity (kcfi) issue when event
callbacks get converted to incompatible types:
sound/core/seq/seq_midi.c:135:30: error: cast from 'int (*)(struct snd_rawmidi_substream *, const char *, int)' to 'snd_seq_dump_func_t' (aka 'int (*)(void *, void *, int)') converts to incompatible function type [-Werror,-Wcast-function-type-strict]
135 | snd_seq_dump_var_event(ev, (snd_seq_dump_func_t)dump_midi, substream);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
sound/core/seq/seq_virmidi.c:83:31: error: cast from 'int (*)(struct snd_rawmidi_substream *, const unsigned char *, int)' to 'snd_seq_dump_func_t' (aka 'int (*)(void *, void *, int)') converts to incompatible function type [-Werror,-Wcast-function-type-strict]
83 | snd_seq_dump_var_event(ev, (snd_seq_dump_func_t)snd_rawmidi_receive, vmidi->substream);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
For addressing those errors, introduce wrapper functions that are used
for callbacks and bridge to the actual function call with pointer
cast.
The code was originally added with the initial ALSA merge in linux-2.5.4.
[ the patch description shamelessly copied from Arnd's original patch
-- tiwai ]
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20240213101020.459183-1-arnd@kernel.org
Link: https://lore.kernel.org/r/20240213135343.16411-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In nvmf_connect_io_queue(), if connect I/O command fails, we log the
error and continue for authentication. This overrides error captured
from __nvme_submit_sync_cmd(), causing wrong return value.
Add goto out_free_data after logging connect error to fix the issue.
Fixes: f50fff73d6 ("nvme: implement In-Band authentication")
Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
This commit ensures the preservation of the order of SoCs according to
their part numbers.
Fixes: 9c57c4a9a4 ("dt-bindings: soc: renesas: Document Renesas RZ/G3S SoC variants")
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240208120455.48009-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>