Document Qcom QCA807x PHY package.
Qualcomm QCA807X Ethernet PHY is PHY package of 2 or 5
IEEE 802.3 clause 22 compliant 10BASE-Te, 100BASE-TX and
1000BASE-T PHY-s.
Document the required property to make the PHY package correctly
configure and work.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move more function to shared library in preparation for introduction of
new PHY Family qca807x that will make use of both functions from at803x
and qca808x as it's a transition PHY with some implementation of at803x
and some from the new qca808x.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add devm/of_phy_package_join helper to join PHYs in a PHY package. These
are variant of the manual phy_package_join with the difference that
these will use DT nodes to derive the base_addr instead of manually
passing an hardcoded value.
An additional value is added in phy_package_shared, "np" to reference
the PHY package node pointer in specific PHY driver probe_once and
config_init_once functions to make use of additional specific properties
defined in the PHY package node in DT.
The np value is filled only with of_phy_package_join if a valid PHY
package node is found. A valid PHY package node must have the node name
set to "ethernet-phy-package".
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for scanning PHY in PHY package nodes. PHY packages nodes
are just container for actual PHY on the MDIO bus.
Their PHY address defined in the PHY package node are absolute and
reflect the address on the MDIO bus.
mdio_bus.c and of_mdio.c is updated to now support and parse also
PHY package subnode by checking if the node name match
"ethernet-phy-package".
As PHY package reg is mandatory and each PHY in the PHY package must
have a reg, every invalid PHY Package node is ignored and will be
skipped by the autoscan fallback.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Document ethernet PHY package nodes used to describe PHY shipped in
bundle of 2-5 PHY. The special node describe a container of PHY that
share common properties. This is a generic schema and PHY package
should create specialized version with the required additional shared
properties.
Example are PHY packages that have some regs only in one PHY of the
package and will affect every other PHY in the package, for example
related to PHY interface mode calibration or global PHY mode selection.
The PHY package node MUST declare the base address used by the PHY driver
for global configuration by calculating the offsets of the global PHY
based on the base address of the PHY package.
Each reg of the PHYs defined in the PHY package node is absolute and
describe the real address of the Ethernet PHY on the bus.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The child_process for addr2line sets in and out to -1 so that pipes
get created. It is the caller's responsibility to close the pipes,
finish_command doesn't do it. Add the missed closes.
Fixes: b3801e7912 ("perf srcline: Simplify addr2line subprocess")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: James Clark <james.clark@arm.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Tom Rix <trix@redhat.com>
Cc: llvm@lists.linux.dev
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240201001504.1348511-8-irogers@google.com
This reverts commit 5785160732.
Unfortunately, while we only call that thing once, the callback
*can* be called more than once for the same dentry - all it
takes is rename_lock being touched while we are in d_walk().
For now let's revert it.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
4 small fixes, 3 in drivers with the remaining core fix being a fixup
to the one in the last pull request which didn't entirely move
checking of scsi_host_busy() out from under the host lock.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZcakBiYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishU5GAP9J3BgQ
evE/NZl5bOFobFRUWOaUwPCU+KzLR8odFBleHAD/SlAapQGDHLm7smUECbiHDVI+
j5T4CLY57a+UQzC8lUc=
=poH3
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Three small driver fixes and one core fix.
The core fix being a fixup to the one in the last pull request which
didn't entirely move checking of scsi_host_busy() out from under the
host lock"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: core: Remove the ufshcd_release() in ufshcd_err_handling_prepare()
scsi: ufs: core: Fix shift issue in ufshcd_clear_cmd()
scsi: lpfc: Use unsigned type for num_sge
scsi: core: Move scsi_host_busy() out of host lock if it is for per-command
-----BEGIN PGP SIGNATURE-----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=jOZH
-----END PGP SIGNATURE-----
Merge tag '6.8-rc3-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
- reconnect fix
- multichannel channel selection fix
- minor mount warning fix
- reparse point fix
- null pointer check improvement
* tag '6.8-rc3-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb3: clarify mount warning
cifs: handle cases where multiple sessions share connection
cifs: change tcon status when need_reconnect is set on it
smb: client: set correct d_type for reparse points under DFS mounts
smb3: add missing null server pointer check
files) and two cap handling fixes from Xiubo and Rishabh.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAmXGRJATHGlkcnlvbW92
QGdtYWlsLmNvbQAKCRBKf944AhHzi+/0B/4pEweAm2W0UUaaS59DecNySBFobwed
m7bBDBGIAQ/I3duN46a13FzsGNclho967TeB0ig1jrQxnoo3HEMiXpZz5xfG9spe
fyvrIk3R8cSqgd7YsyITnUjGGd2UBvZVrbWOCbWrKofSoflS6IjcGDQF7ZrgEsff
0KkMaWHvO6poIU2mAToV//UkWUk6RrtAUNlSdjLpizXnUrrAQ+vUA3OU9SSp6Klf
xmFaIiAiVZC6M8qFpXJtnIf8Ba7PrpW5InAXgCOkxDKciE9fLaPsIu0B3H9lUVKZ
TJwjEJ0nB+akh0tRO5bZKyM8j0D3lhgxphJwNtUoYjQsV3m7LcGQV+Il
=u953
-----END PGP SIGNATURE-----
Merge tag 'ceph-for-6.8-rc4' of https://github.com/ceph/ceph-client
Pull ceph fixes from Ilya Dryomov:
"Some fscrypt-related fixups (sparse reads are used only for encrypted
files) and two cap handling fixes from Xiubo and Rishabh"
* tag 'ceph-for-6.8-rc4' of https://github.com/ceph/ceph-client:
ceph: always check dir caps asynchronously
ceph: prevent use-after-free in encode_cap_msg()
ceph: always set initial i_blkbits to CEPH_FSCRYPT_BLOCK_SHIFT
libceph: just wait for more data to be available on the socket
libceph: rename read_sparse_msg_*() to read_partial_sparse_msg_*()
libceph: fail sparse-read if the data length doesn't match
-----BEGIN PGP SIGNATURE-----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=4Gkn
-----END PGP SIGNATURE-----
Merge tag 'ntfs3_for_6.8' of https://github.com/Paragon-Software-Group/linux-ntfs3
Pull ntfs3 fixes from Konstantin Komarov:
"Fixed:
- size update for compressed file
- some logic errors, overflows
- memory leak
- some code was refactored
Added:
- implement super_operations::shutdown
Improved:
- alternative boot processing
- reduced stack usage"
* tag 'ntfs3_for_6.8' of https://github.com/Paragon-Software-Group/linux-ntfs3: (28 commits)
fs/ntfs3: Slightly simplify ntfs_inode_printk()
fs/ntfs3: Add ioctl operation for directories (FITRIM)
fs/ntfs3: Fix oob in ntfs_listxattr
fs/ntfs3: Fix an NULL dereference bug
fs/ntfs3: Update inode->i_size after success write into compressed file
fs/ntfs3: Fixed overflow check in mi_enum_attr()
fs/ntfs3: Correct function is_rst_area_valid
fs/ntfs3: Use i_size_read and i_size_write
fs/ntfs3: Prevent generic message "attempt to access beyond end of device"
fs/ntfs3: use non-movable memory for ntfs3 MFT buffer cache
fs/ntfs3: Use kvfree to free memory allocated by kvmalloc
fs/ntfs3: Disable ATTR_LIST_ENTRY size check
fs/ntfs3: Fix c/mtime typo
fs/ntfs3: Add NULL ptr dereference checking at the end of attr_allocate_frame()
fs/ntfs3: Add and fix comments
fs/ntfs3: ntfs3_forced_shutdown use int instead of bool
fs/ntfs3: Implement super_operations::shutdown
fs/ntfs3: Drop suid and sgid bits as a part of fpunch
fs/ntfs3: Add file_modified
fs/ntfs3: Correct use bh_read
...
We've had issues with gcc and 'asm goto' before, and we created a
'asm_volatile_goto()' macro for that in the past: see commits
3f0116c323 ("compiler/gcc4: Add quirk for 'asm goto' miscompilation
bug") and a9f180345f ("compiler/gcc4: Make quirk for
asm_volatile_goto() unconditional").
Then, much later, we ended up removing the workaround in commit
43c249ea0b ("compiler-gcc.h: remove ancient workaround for gcc PR
58670") because we no longer supported building the kernel with the
affected gcc versions, but we left the macro uses around.
Now, Sean Christopherson reports a new version of a very similar
problem, which is fixed by re-applying that ancient workaround. But the
problem in question is limited to only the 'asm goto with outputs'
cases, so instead of re-introducing the old workaround as-is, let's
rename and limit the workaround to just that much less common case.
It looks like there are at least two separate issues that all hit in
this area:
(a) some versions of gcc don't mark the asm goto as 'volatile' when it
has outputs:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=98619https://gcc.gnu.org/bugzilla/show_bug.cgi?id=110420
which is easy to work around by just adding the 'volatile' by hand.
(b) Internal compiler errors:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=110422
which are worked around by adding the extra empty 'asm' as a
barrier, as in the original workaround.
but the problem Sean sees may be a third thing since it involves bad
code generation (not an ICE) even with the manually added 'volatile'.
but the same old workaround works for this case, even if this feels a
bit like voodoo programming and may only be hiding the issue.
Reported-and-tested-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/all/20240208220604.140859-1-seanjc@google.com/
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Uros Bizjak <ubizjak@gmail.com>
Cc: Jakub Jelinek <jakub@redhat.com>
Cc: Andrew Pinski <quic_apinski@quicinc.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Plug in USB-C related bits and pieces to enable USB role switching and
USB-C orientation handling for the Qualcomm RB2 board.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240130-pmi632-typec-v3-6-b05fe44f0a51@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Stop selecting UTMI clock as the USB3 PIPE clock. This setting is
incompatible with the USB host working in USB3 (SuperSpeed) mode.
While we are at it, also drop the default setting for the port speed.
Fixes: 9dd5f6dba7 ("arm64: dts: qcom: sm6115: Add USB SS qmp phy node")
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
[DB: fixed commit message, dropped dr_mode setting]
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Luca Weiss <luca.weiss@fairphone.com> # sdm632-fairphone-fp3
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240130-pmi632-typec-v3-5-b05fe44f0a51@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Some platforms have 'cluster' topology and CPUs in the cluster will
share resources like L3 Cache Tag (for HiSilicon Kunpeng SoC) or L2
cache (for Intel Jacobsville). Currently parsing and building cluster
topology have been supported since [1].
perf stat has already supported aggregation for other topologies like
die or socket, etc. It'll be useful to aggregate per-cluster to find
problems like L3T bandwidth contention.
This patch add support for "--per-cluster" option for per-cluster
aggregation. Also update the docs and related test. The output will
be like:
[root@localhost tmp]# perf stat -a -e LLC-load --per-cluster -- sleep 5
Performance counter stats for 'system wide':
S56-D0-CLS158 4 1,321,521,570 LLC-load
S56-D0-CLS594 4 794,211,453 LLC-load
S56-D0-CLS1030 4 41,623 LLC-load
S56-D0-CLS1466 4 41,646 LLC-load
S56-D0-CLS1902 4 16,863 LLC-load
S56-D0-CLS2338 4 15,721 LLC-load
S56-D0-CLS2774 4 22,671 LLC-load
[...]
On a legacy system without cluster or cluster support, the output will
be look like:
[root@localhost perf]# perf stat -a -e cycles --per-cluster -- sleep 1
Performance counter stats for 'system wide':
S56-D0-CLS0 64 18,011,485 cycles
S7182-D0-CLS0 64 16,548,835 cycles
Note that this patch doesn't mix the cluster information in the outputs
of --per-core to avoid breaking any tools/scripts using it.
Note that perf recently supports "--per-cache" aggregation, but it's not
the same with the cluster although cluster CPUs may share some cache
resources. For example on my machine all clusters within a die share the
same L3 cache:
$ cat /sys/devices/system/cpu/cpu0/cache/index3/shared_cpu_list
0-31
$ cat /sys/devices/system/cpu/cpu0/topology/cluster_cpus_list
0-3
[1] commit c5e22feffd ("topology: Represent clusters of CPUs within a die")
Tested-by: Jie Zhan <zhanjie9@hisilicon.com>
Reviewed-by: Tim Chen <tim.c.chen@linux.intel.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Cc: james.clark@arm.com
Cc: 21cnbao@gmail.com
Cc: prime.zeng@hisilicon.com
Cc: Jonathan.Cameron@huawei.com
Cc: fanghao11@huawei.com
Cc: linuxarm@huawei.com
Cc: tim.c.chen@intel.com
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240208024026.2691-1-yangyicong@huawei.com
Breno Leitao says:
====================
net: Fix MODULE_DESCRIPTION() for net (p5)
There are hundreds of network modules that misses MODULE_DESCRIPTION(),
causing a warning when compiling with W=1. Example:
WARNING: modpost: missing MODULE_DESCRIPTION() in net/sched/em_cmp.o
WARNING: modpost: missing MODULE_DESCRIPTION() in net/sched/em_nbyte.o
WARNING: modpost: missing MODULE_DESCRIPTION() in net/sched/em_u32.o
WARNING: modpost: missing MODULE_DESCRIPTION() in net/sched/em_meta.o
WARNING: modpost: missing MODULE_DESCRIPTION() in net/sched/em_text.o
WARNING: modpost: missing MODULE_DESCRIPTION() in net/sched/em_canid.o
WARNING: modpost: missing MODULE_DESCRIPTION() in net/ipv4/ip_tunnel.o
WARNING: modpost: missing MODULE_DESCRIPTION() in net/ipv4/ipip.o
WARNING: modpost: missing MODULE_DESCRIPTION() in net/ipv4/ip_gre.o
WARNING: modpost: missing MODULE_DESCRIPTION() in net/ipv4/udp_tunnel.o
WARNING: modpost: missing MODULE_DESCRIPTION() in net/ipv4/ip_vti.o
WARNING: modpost: missing MODULE_DESCRIPTION() in net/ipv4/ah4.o
WARNING: modpost: missing MODULE_DESCRIPTION() in net/ipv4/esp4.o
WARNING: modpost: missing MODULE_DESCRIPTION() in net/ipv4/xfrm4_tunnel.o
WARNING: modpost: missing MODULE_DESCRIPTION() in net/ipv4/tunnel4.o
WARNING: modpost: missing MODULE_DESCRIPTION() in net/xfrm/xfrm_algo.o
WARNING: modpost: missing MODULE_DESCRIPTION() in net/xfrm/xfrm_user.o
WARNING: modpost: missing MODULE_DESCRIPTION() in net/ipv6/ah6.o
WARNING: modpost: missing MODULE_DESCRIPTION() in net/ipv6/esp6.o
WARNING: modpost: missing MODULE_DESCRIPTION() in net/ipv6/xfrm6_tunnel.o
WARNING: modpost: missing MODULE_DESCRIPTION() in net/ipv6/tunnel6.o
This part5 of the patchset focus on the missing net/ module, which
are now warning free.
v1: https://lore.kernel.org/all/20240205101400.1480521-1-leitao@debian.org/
v2: https://lore.kernel.org/all/20240207101929.484681-1-leitao@debian.org/
====================
Link: https://lore.kernel.org/r/20240208164244.3818498-1-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
W=1 builds now warn if module is built without a MODULE_DESCRIPTION().
Add descriptions to the DSA loopback fixed PHY module.
Suggested-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20240208164244.3818498-10-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
W=1 builds now warn if module is built without a MODULE_DESCRIPTION().
Add descriptions to the IP-VLAN based tap driver.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240208164244.3818498-9-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
W=1 builds now warn if module is built without a MODULE_DESCRIPTION().
Add descriptions to the network schedulers.
Suggested-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/20240208164244.3818498-8-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
W=1 builds now warn if module is built without a MODULE_DESCRIPTION().
Add descriptions to the IPv4 modules.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240208164244.3818498-7-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
W=1 builds now warn if module is built without a MODULE_DESCRIPTION().
Add descriptions to the IPv6 modules.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240208164244.3818498-6-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
W=1 builds now warn if module is built without a MODULE_DESCRIPTION().
Add descriptions to IPv6 over Low power Wireless Personal Area Network.
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Alexander Aring <aahringo@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240208164244.3818498-5-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
W=1 builds now warn if module is built without a MODULE_DESCRIPTION().
Add descriptions to the PF_KEY socket helpers.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240208164244.3818498-4-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
W=1 builds now warn if module is built without a MODULE_DESCRIPTION().
Add descriptions to the Multi-Protocol Over ATM (MPOA) driver.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240208164244.3818498-3-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
W=1 builds now warn if module is built without a MODULE_DESCRIPTION().
Add descriptions to the XFRM interface drivers.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240208164244.3818498-2-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When it converts sample IP to or from objdump-capable one, there's a
comment saying that kernel modules have DSO_SPACE__USER. But commit
02213cec64 ("perf maps: Mark module DSOs with kernel type") changed
it and makes the comment confusing. Let's get rid of it.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20240208181025.1329645-1-namhyung@kernel.org
slist needs to be freed in both error path and normal path in
thread_map__new_by_tid_str().
Fixes: b52956c961 ("perf tools: Allow multiple threads or processes in record, stat, top")
Reviewed-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240206083228.172607-6-yangjihong1@huawei.com
perf_sched__map() needs to free memory of map_cpus, color_pids and
color_cpus in normal path and rollback allocated memory in error path.
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240206083228.172607-3-yangjihong1@huawei.com
There is a crash when adding one of the lan966x interfaces under a lag
interface. The issue can be reproduced like this:
ip link add name bond0 type bond miimon 100 mode balance-xor
ip link set dev eth0 master bond0
The reason is because when adding a interface under the lag it would go
through all the ports and try to figure out which other ports are under
that lag interface. And the issue is that lan966x can have ports that are
NULL pointer as they are not probed. So then iterating over these ports
it would just crash as they are NULL pointers.
The fix consists in actually checking for NULL pointers before accessing
something from the ports. Like we do in other places.
Fixes: cabc9d4933 ("net: lan966x: Add lag support for lan966x")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240206123054.3052966-1-horatiu.vultur@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Async can schedule a number of interdependent work items. However, since
5797b1c189 ("workqueue: Implement system-wide nr_active enforcement for
unbound workqueues"), unbound workqueues have separate min_active which sets
the number of interdependent work items that can be handled. This default
value is 8 which isn't sufficient for async and can lead to stalls during
resume from suspend in some cases.
Let's use a dedicated unbound workqueue with raised min_active.
Link: http://lkml.kernel.org/r/708a65cc-79ec-44a6-8454-a93d0f3114c3@samsung.com
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Since 5797b1c189 ("workqueue: Implement system-wide nr_active enforcement
for unbound workqueues"), unbound workqueues have separate min_active which
sets the number of interdependent work items that can be handled. This value
is currently initialized to WQ_DFL_MIN_ACTIVE which is 8. This isn't high
enough for some users, let's add an interface to adjust the setting.
Signed-off-by: Tejun Heo <tj@kernel.org>
Fix the kernel-doc comment of the unplug_oldest_pwq() function to enable
proper processing and formatting of the embedded ASCII diagram.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Tony Nguyen says:
====================
igc: ethtool: Flex filter cleanup
Kurt Kanzenbach says:
This series contains some cosmetics for the flex filter code. The fixes have
been merged separately via -net already.
* '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
igc: Unify filtering rule fields
igc: Use netdev printing functions for flex filters
igc: Use reverse xmas tree
====================
Link: https://lore.kernel.org/r/20240207191656.1250777-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
While testing tdc with parallel tests for mirred to block we caught an
intermittent bug. The blockid was being zeroed out when a net device
was deleted and, thus, giving us an incorrect blockid value whenever
we tried to dump the mirred action. Since we don't increment the block
refcount in the control path (and only use the ID), we don't need to
zero the blockid field whenever a net device is going down.
Fixes: 42f39036cd ("net/sched: act_mirred: Allow mirred to block")
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/20240207222902.1469398-1-victor@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
udpgso regression test configures routing and device MTU directly through
uAPI (Netlink, ioctl) to do its job. While there is nothing wrong with it,
it takes more effort than doing it from shell.
Looking forward, we would like to extend the udpgso regression tests to
cover the EIO corner case [1], once it gets addressed. That will require a
dummy device and device feature manipulation to set it up. Which means more
Netlink code.
So, in preparation, pull out network configuration into the shell script
part of the test, so it is easily extendable in the future.
Also, because it now easy to setup routing, add a second local IPv6
address. Because the second address is not managed by the kernel, we can
"replace" the corresponding local route with a reduced-MTU one. This
unblocks the disabled "ipv6 connected" test case. Add a similar setup for
IPv4 for symmetry.
[1] https://lore.kernel.org/netdev/87jzqsld6q.fsf@cloudflare.com/
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/r/20240207-jakub-krn-635-v3-1-3dfa3da8a7d3@cloudflare.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert EEE handling to use linkmode bitmaps. This prepares for
removing the legacy bitmaps from struct ethtool_keee.
No functional change intended.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/c5a61d57-d2b0-427f-93b3-fcf7721165f3@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert EEE handling to use linkmode bitmaps. This prepares for
removing the legacy bitmaps from struct ethtool_keee.
No functional change intended.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/948562fb-c5d8-4912-8b88-bec56238732a@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Aaron Conole says:
====================
net: openvswitch: limit the recursions from action sets
Open vSwitch module accepts actions as a list from the netlink socket
and then creates a copy which it uses in the action set processing.
During processing of the action list on a packet, the module keeps a
count of the execution depth and exits processing if the action depth
goes too high.
However, during netlink processing the recursion depth isn't checked
anywhere, and the copy trusts that kernel has large enough stack to
accommodate it. The OVS sample action was the original action which
could perform this kinds of recursion, and it originally checked that
it didn't exceed the sample depth limit. However, when sample became
optimized to provide the clone() semantics, the recursion limit was
dropped.
This series adds a depth limit during the __ovs_nla_copy_actions() call
that will ensure we don't exceed the max that the OVS userspace could
generate for a clone().
Additionally, this series provides a selftest in 2/2 that can be used to
determine if the OVS module is allowing unbounded access. It can be
safely omitted where the ovs selftest framework isn't available.
====================
Link: https://lore.kernel.org/r/20240207132416.1488485-1-aconole@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a test case into the netlink checks that will show the number of
nested action recursions won't exceed 16. Going to 17 on a small
clone call isn't enough to exhaust the stack on (most) systems, so
it should be safe to run even on systems that don't have the fix
applied.
Signed-off-by: Aaron Conole <aconole@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240207132416.1488485-3-aconole@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ovs module allows for some actions to recursively contain an action
list for complex scenarios, such as sampling, checking lengths, etc.
When these actions are copied into the internal flow table, they are
evaluated to validate that such actions make sense, and these calls
happen recursively.
The ovs-vswitchd userspace won't emit more than 16 recursion levels
deep. However, the module has no such limit and will happily accept
limits larger than 16 levels nested. Prevent this by tracking the
number of recursions happening and manually limiting it to 16 levels
nested.
The initial implementation of the sample action would track this depth
and prevent more than 3 levels of recursion, but this was removed to
support the clone use case, rather than limited at the current userspace
limit.
Fixes: 798c166173 ("openvswitch: Optimize sample action for the clone use cases")
Signed-off-by: Aaron Conole <aconole@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240207132416.1488485-2-aconole@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After 3a2746320403 ("leds: trigger: netdev: Display only supported link
speed attribute") the check for valid link modes can be simplified.
In addition factor it out, so that it can be re-used by the upcoming
LED support for RTL8125.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/8876a9f4-7a2d-48c3-8eae-0d834f5c27c5@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The altnames test uses the forwarding/lib.sh and that dependency
currently causes failures when running the test after install:
make -C tools/testing/selftests/ TARGETS=net install
./tools/testing/selftests/kselftest_install/run_kselftest.sh \
-t net:altnames.sh
# ...
# ./altnames.sh: line 8: ./forwarding/lib.sh: No such file or directory
# RTNETLINK answers: Operation not permitted
# ./altnames.sh: line 73: tests_run: command not found
# ./altnames.sh: line 65: pre_cleanup: command not found
Address the issue leveraging the TEST_INCLUDES infrastructure
provided by commit 2a0683be5b ("selftests: Introduce Makefile variable
to list shared bash scripts")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/f7b1e9d468224cbc136d304362315499fe39848f.1707298927.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When a user tries to use the "sec=krb5p" mount parameter to encrypt
data on connection to a server (when authenticating with Kerberos), we
indicate that it is not supported, but do not note the equivalent
recommended mount parameter ("sec=krb5,seal") which turns on encryption
for that mount (and uses Kerberos for auth). Update the warning message.
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Based on our implementation of multichannel, it is entirely
possible that a server struct may not be found in any channel
of an SMB session.
In such cases, we should be prepared to move on and search for
the server struct in the next session.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
When a tcon is marked for need_reconnect, the intention
is to have it reconnected.
This change adjusts tcon->status in cifs_tree_connect
when need_reconnect is set. Also, this change has a minor
correction in resetting need_reconnect on success. It makes
sure that it is done with tc_lock held.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>