This is required for reliable hard resets. Otherwise, doing a hard reset
while a task is still running (such as a task which is being stopped by
the drm_sched timeout handler) may result in random mmu write timeouts
or lockups which cause the entire gpu to hang.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240124025947.2110659-4-nunes.erico@gmail.com
Lima gp jobs use an async reset to avoid having to wait for the soft
reset right after a job. The soft reset is done at the end of a job and
a reset_complete flag is expected to be set at the next job.
However, in case the user runs into a job timeout from any application,
a hard reset is issued to the hardware. This hard reset clears the
reset_complete flag, which causes an error message to show up before the
next job.
This is probably harmless for the execution but can be very confusing to
debug, as it blames a reset timeout on the next application to submit a
job.
Reset the async_reset flag when doing the hard reset so that we don't
get that message.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240124025947.2110659-3-nunes.erico@gmail.com
Lima pp jobs use an async reset to avoid having to wait for the soft
reset right after a job. The soft reset is done at the end of a job and
a reset_complete flag is expected to be set at the next job.
However, in case the user runs into a job timeout from any application,
a hard reset is issued to the hardware. This hard reset clears the
reset_complete flag, which causes an error message to show up before the
next job.
This is probably harmless for the execution but can be very confusing to
debug, as it blames a reset timeout on the next application to submit a
job.
Reset the async_reset flag when doing the hard reset so that we don't
get that message.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240124025947.2110659-2-nunes.erico@gmail.com
Issue IP reset before shutdown in order to
complete all upstream requests to the SOC.
Without this DevTLB is complaining about
incomplete transactions and NPU cannot resume from
suspend.
This problem is only happening on recent IFWI
releases.
IP reset in rare corner cases can mess up PCI
configuration, so save it before the reset.
After this happens it is also impossible to
issue PLL requests and D0->D3->D0 cycle is needed
to recover the NPU. Add WP 0 request on power up,
so the PUNIT is always notified about NPU reset.
Use D0/D3 cycle for recovery as it can recover
from failed IP reset and FLR cannot.
Fixes: 3f7c063492 ("accel/ivpu/37xx: Fix hangs related to MMIO reset")
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240207102446.3126981-1-jacek.lawrynowicz@linux.intel.com
Since commit d492cc2573 ("driver core: device.h: make struct bus_type
a const *"), the driver core can properly handle constant struct
bus_type, move the s3c6410_subsys variable to be a constant structure as
well, placing it into read-only memory which can not be modified at
runtime.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20240204-bus_cleanup-arm-v1-1-41d651dd8411@marliere.net
Link: https://lore.kernel.org/r/20240211-bus_cleanup-arm-v2-1-3de9e8af7cbd@marliere.net
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Merge series from Hans de Goede <hdegoede@redhat.com>:
While testing 6.8 on a Bay Trail device with a ALC5640 codec
I noticed a regression in 6.8 which causes a NULL pointer deref
in probe().
All BYT/CHT Intel machine drivers are affected. Patch 1/2 of
this series fixes all of them.
Patch 2/2 adds some small cleanups to cht_bsw_rt5645.c for
issues which I noticed while working on 1/2.
File open requests made to the server contain a
CreateGuid, which is used by the server to identify
the open request. If the same request needs to be
replayed, it needs to be sent with the same CreateGuid
in the durable handle v2 context.
Without doing so, we could end up leaking handles on
the server when:
1. multichannel is used AND
2. connection goes down, but not for all channels
This is because the replayed open request would have a
new CreateGuid and the server will treat this as a new
request and open a new handle.
This change fixes this by reusing the existing create_guid
stored in the cached fid struct.
REF: MS-SMB2 4.9 Replay Create Request on an Alternate Channel
Fixes: 4f1fffa237 ("cifs: commands that are retried should have replay flag set")
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
In this loop, we step through the buffer and after each item we check
if the size_left is greater than the minimum size we need. However,
the problem is that "bytes_left" is type ssize_t while sizeof() is type
size_t. That means that because of type promotion, the comparison is
done as an unsigned and if we have negative bytes left the loop
continues instead of ending.
Fixes: fe856be475 ("CIFS: parse and store info on iface queries")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
The driver uses regmap APIs so it should make sure they are available.
Fixes: c75f4bf680 ("power: supply: Introduce MM8013 fuel gauge driver")
Cc: <stable@vger.kernel.org>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240204-mm8013-regmap-v1-1-7cc6b619b7d3@weissschuh.net
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Add bindings for the LTC4282 High Current Hot Swap Controller with I2C
Compatible Monitoring.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240129-b4-ltc4282-support-v4-1-fe75798164cc@analog.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Use _pmbus_write_word_data to allow intercepting writes to
PMBUS_SMBALERT_MASK in the custom chip specific code.
This is required for MP2971/MP2973 which doesn't follow the
PMBUS specification for PMBUS_SMBALERT_MASK.
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Naresh Solanki <naresh.solanki@9elements.com>
Link: https://lore.kernel.org/r/20240130152903.3651341-1-naresh.solanki@9elements.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Class-based I2C probing requires detect() and address_list both
to be set in the I2C client driver, see checks in i2c_detect().
It's misleading to declare I2C_CLASS_HWMON support if the driver
doesn't implement detect().
Class-based probing is a legacy mechanism, in addition apparently
nobody ever noticed that class-based probing has been non-functional
in both drivers from the very beginning. So drop the fragments of
class-based probing support.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/13ce7c11-a958-4892-ada9-faf5bfdcb89d@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Drop maintainer entries for MAX31760 and MAX31827 since the e-mail
addresses of their maintainers is no longer reachable and there is
no known alternative means to contact them.
HWMON drivers have a subsystem maintainer, so individual maintainer
entries are not mandatory.
Reported-by: Heiner Kallweit <hkallweit1@gmail.com>
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Class-based I2C probing requires detect() and address_list to be
set in the I2C client driver, see checks in i2c_detect().
It's misleading to declare I2C_CLASS_HWMON support if this
precondition isn't met.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/75747c6a-d414-4b07-8f66-5a5cdddc3c36@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
There are two drivers in the Linux kernel. One is hwmon based and second
IIO. IIO version requires to define #io-channel-cells to operate.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/aa303b9fe3116e7f98d6b72822f7f57694366db3.1703077926.git.michal.simek@amd.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add a label property to allow a custom name to be used for identifying
a device on the board. This is useful when multiple devices are present on
the same board. Similar change was done by commit ffae65fb1a
("dt-bindings: spi: spi-cadence: Add label property").
Signed-off-by: Michal Simek <michal.simek@amd.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/6f3c57d08984c1978569d3918cb38eb295c0c67d.1703077926.git.michal.simek@amd.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
HWMON_CHANNEL_INFO() is supposed to be used as initializer for arrays of
const struct hwmon_channel_info *. However, without explicit const,
HWMON_CHANNEL_INFO() creates mutable compound literals, and the const
pointers point at the mutable data. Add const to place the data in
rodata.
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/20240117114405.1506775-1-jani.nikula@intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add bindings and driver for the three MSM8909 NoCs/interconnects:
BIMC, SNoC and PCNoC. The driver allows scaling the bus bandwidths
for better power management.
* icc-msm8909
dt-bindings: interconnect: Add Qualcomm MSM8909 DT bindings
interconnect: qcom: Add MSM8909 interconnect provider driver
interconnect: qcom: msm8909: constify pointer to qcom_icc_node
Link: https://lore.kernel.org/r/20231220-icc-msm8909-v2-0-3b68bbed2891@kernkonzept.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Pointers to struct qcom_icc_bcm are const.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240208105056.128448-7-krzysztof.kozlowski@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
The atomic_mode_set() callback only sets the phys_enc's IRQ data. As the
INTF and WB are statically allocated to each encoder/phys_enc, drop the
atomic_mode_set callback and set the IRQs during encoder init.
For the CMD panel usecase some of IRQ indexes depend on the selected
resources. Move setting them to the irq_enable() callback.
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Tested-by: Abhinav Kumar <quic_abhinavk@quicinc.com> # sc7280
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/577529/
Link: https://lore.kernel.org/r/20240208-fd_remove_phys_ops_atomic_mode_set-v4-3-caf5dcd125c0@linaro.org
When the topology calls for two interfaces on the current fixed topology
of 2 DSC blocks, or uses 1 DSC block for a single interface (e.g. SC7280
with only one DSC block), there should be no merging of DSC output.
This is already represented by the return value of
dpu_encoder_use_dsc_merge(), but not yet used to correctly configure
this flag.
Fixes: 58dca98107 ("drm/msm/disp/dpu1: Add support for DSC in encoder")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/577067/
Link: https://lore.kernel.org/r/20240204-dpu-dsc-multiplex-v1-1-080963233c52@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
In order to check schemas for missing additionalProperties or
unevaluatedProperties, cases allowing extra properties must be explicit.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/576954/
Link: https://lore.kernel.org/r/20240202222338.1652333-1-robh@kernel.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Currently INTF_CFG2_DATA_HCTL_EN is coupled with the enablement
of widebus but this is incorrect because we should be enabling
this bit independent of widebus except for cases where compression
is enabled in one pixel per clock mode.
Fix this by making the condition checks more explicit and enabling
INTF_CFG2_DATA_HCTL_EN for all other cases when supported by DPU.
Fixes: 3309a75639 ("drm/msm/dpu: revise timing engine programming to support widebus feature")
Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/576722/
Link: https://lore.kernel.org/r/20240201004737.2478-1-quic_abhinavk@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Finally drop separate "parsing" submodule. There is no need in it
anymore. All submodules handle DT properties directly rather than
passing them via the separate structure pointer.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/576116/
Link: https://lore.kernel.org/r/20240126-dp-power-parser-cleanup-v3-15-098d5f581dd3@linaro.org
Split the dp_ctrl_clk_enable() beast into four functions, each of them
doing just a single item: enabling or disabling core or link clocks.
This allows us to cleanup the dss_module_power structure and makes
several dp_ctrl functions return void.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/576105/
Link: https://lore.kernel.org/r/20240126-dp-power-parser-cleanup-v3-8-098d5f581dd3@linaro.org
All supported platforms use the same clocks configuration. Instead of
parsing names from DT in a pretty complex manner, use the static
configuration. If at some point newer (or older) platforms have
different clock configuration, this clock config can be moved to the
device data.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/576115/
Link: https://lore.kernel.org/r/20240126-dp-power-parser-cleanup-v3-7-098d5f581dd3@linaro.org
It makes little sense to split the submodule get and actual DT parsing.
Call dp_parser_parse() directly from dp_parser_get(), so that the parser
data is fully initialised once it is returned to the caller.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/576101/
Link: https://lore.kernel.org/r/20240126-dp-power-parser-cleanup-v3-3-098d5f581dd3@linaro.org
Pointers to struct qcom_icc_bcm are const.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240208105056.128448-6-krzysztof.kozlowski@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>