This has scsi_probe_lun() ask the SCSI midlayer to retry UAs instead of
driving them itself.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Link: https://lore.kernel.org/r/20240123002220.129141-3-michael.christie@oracle.com
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
For passthrough we don't retry any error which we get a check condition
for. This results in a lot of callers driving their own retries for all
UAs, specific UAs, NOT_READY, specific sense values or any type of failure.
This adds the core code to allow passthrough users to specify what errors
they want the SCSI midlayer to retry for them. We can then convert users to
drop a lot of their sense parsing and retry handling.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Link: https://lore.kernel.org/r/20240123002220.129141-2-michael.christie@oracle.com
Reviewed-by: John Garry <john.g.garry@oracle.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When working with GPIO, its direction must be set either when the GPIO is
requested by gpiod_get*() or later on by one of the gpiod_direction_*()
functions. Neither of this is done here which results in undefined
behavior on some systems.
As the reset GPIO is used right after it is requested here, it makes sense
to configure it as GPIOD_OUT_HIGH right away. With that, the following
gpiod_set_value_cansleep(1) becomes redundant and can be safely
removed.
Fixes: a653f2f538 ("net: dsa: qca8k: introduce reset via gpio feature")
Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/1706266175-3408-1-git-send-email-michal.vokac@ysoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For now, the packet with an old ack is not accepted if we are in
FIN_WAIT1 state, which can cause retransmission. Taking the following
case as an example:
Client Server
| |
FIN_WAIT1(Send FIN, seq=10) FIN_WAIT1(Send FIN, seq=20, ack=10)
| |
| Send ACK(seq=21, ack=11)
Recv ACK(seq=21, ack=11)
|
Recv FIN(seq=20, ack=10)
In the case above, simultaneous close is happening, and the FIN and ACK
packet that send from the server is out of order. Then, the FIN will be
dropped by the client, as it has an old ack. Then, the server has to
retransmit the FIN, which can cause delay if the server has set the
SO_LINGER on the socket.
Old ack is accepted in the ESTABLISHED and TIME_WAIT state, and I think
it should be better to keep the same logic.
In this commit, we accept old ack in FIN_WAIT1/FIN_WAIT2/CLOSING/LAST_ACK
states. Maybe we should limit it to FIN_WAIT1 for now?
Signed-off-by: Menglong Dong <menglong8.dong@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240126040519.1846345-1-menglong8.dong@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Arınç ÜNAL says:
====================
MT7530 DSA Subdriver Improvements Act I
This patch series simplifies the MT7530 DSA subdriver and improves the
logic of the support for MT7530, MT7531, and the switch on the MT7988 SoC.
I have done a simple ping test to confirm basic communication on all switch
ports on MCM and standalone MT7530, and MT7531 switch with this patch
series applied.
MT7621 Unielec, MCM MT7530:
rgmii-only-gmac0-mt7621-unielec-u7621-06-16m.dtb
gmac0-and-gmac1-mt7621-unielec-u7621-06-16m.dtb
tftpboot 0x80008000 mips-uzImage.bin; tftpboot 0x83000000 mips-rootfs.cpio.uboot; tftpboot 0x83f00000 $dtb; bootm 0x80008000 0x83000000 0x83f00000
MT7622 Bananapi, MT7531:
gmac0-and-gmac1-mt7622-bananapi-bpi-r64.dtb
tftpboot 0x40000000 arm64-Image; tftpboot 0x45000000 arm64-rootfs.cpio.uboot; tftpboot 0x4a000000 $dtb; booti 0x40000000 0x45000000 0x4a000000
MT7623 Bananapi, standalone MT7530:
rgmii-only-gmac0-mt7623n-bananapi-bpi-r2.dtb
gmac0-and-gmac1-mt7623n-bananapi-bpi-r2.dtb
tftpboot 0x80008000 arm-zImage; tftpboot 0x83000000 arm-rootfs.cpio.uboot; tftpboot 0x83f00000 $dtb; bootz 0x80008000 0x83000000 0x83f00000
This patch series is the continuation of the patch series linked below.
https://lore.kernel.org/r/20230522121532.86610-1-arinc.unal@arinc9.com
v2: https://lore.kernel.org/r/20231227044347.107291-1-arinc.unal@arinc9.com
v1: https://lore.kernel.org/r/20231118123205.266819-1-arinc.unal@arinc9.com
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
====================
Link: https://lore.kernel.org/r/20240122-for-netnext-mt7530-improvements-1-v3-0-042401f2b279@arinc9.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There's no need to run all the code on mt7530_setup_port5() if port 5 is
disabled. The only case for calling mt7530_setup_port5() from
mt7530_setup() is when PHY muxing is enabled. That is because port 5 is not
defined as a port on the devicetree, therefore, it cannot be controlled by
phylink.
Because of this, run mt7530_setup_port5() if priv->p5_intf_sel is
P5_INTF_SEL_PHY_P0 or P5_INTF_SEL_PHY_P4. Remove the P5_DISABLED case from
mt7530_setup_port5().
Stop initialising the interface variable as the remaining cases will always
call mt7530_setup_port5() with it initialised.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20240122-for-netnext-mt7530-improvements-1-v3-7-042401f2b279@arinc9.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Running mt7530_setup_port5() from mt7530_setup() used to handle all cases
of configuring port 5, including phylink.
Setting priv->p5_interface under mt7530_setup_port5() makes sure that
mt7530_setup_port5() from mt753x_phylink_mac_config() won't run.
The commit ("net: dsa: mt7530: improve code path for setting up port 5")
makes so that mt7530_setup_port5() from mt7530_setup() runs only on
non-phylink cases.
Get rid of unnecessarily setting priv->p5_interface under
mt7530_setup_port5() as port 5 phylink configuration will be done by
running mt7530_setup_port5() from mt753x_phylink_mac_config() now.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20240122-for-netnext-mt7530-improvements-1-v3-6-042401f2b279@arinc9.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There're two code paths for setting up port 5:
mt7530_setup()
-> mt7530_setup_port5()
mt753x_phylink_mac_config()
-> mt753x_mac_config()
-> mt7530_mac_config()
-> mt7530_setup_port5()
Currently mt7530_setup_port5() from mt7530_setup() always runs. If port 5
is used as a CPU, DSA, or user port, mt7530_setup_port5() from
mt753x_phylink_mac_config() won't run. That is because priv->p5_interface
set on mt7530_setup_port5() will match state->interface on
mt753x_phylink_mac_config() which will stop running mt7530_setup_port5()
again.
Therefore, mt7530_setup_port5() will never run from
mt753x_phylink_mac_config().
Address this by not running mt7530_setup_port5() from mt7530_setup() if
port 5 is used as a CPU, DSA, or user port. This driver isn't in the
dsa_switches_apply_workarounds[] array so phylink will always be present.
To keep the cases where port 5 isn't controlled by phylink working as
before, preserve the mt7530_setup_port5() call from mt7530_setup().
Do not set priv->p5_intf_sel to P5_DISABLED. It is already set to that when
"priv" is allocated.
Move setting the interface to a more specific location. It's supposed to be
overwritten if PHY muxing is detected.
Improve the comment which explains the process.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20240122-for-netnext-mt7530-improvements-1-v3-5-042401f2b279@arinc9.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There's no logic to numerically order the CPU ports. Just state the port
number instead.
Remove the irrelevant PHY muxing information from
mt7530_mac_port_get_caps(). Explain the supported MII modes instead.
Remove the out of place PHY muxing information from
mt753x_phylink_mac_config(). The function is for MT7530, MT7531, and the
switch on the MT7988 SoC but there's no PHY muxing on MT7531 or the switch
on the MT7988 SoC.
These comments were gradually introduced with the commits below.
commit ca366d6c88 ("net: dsa: mt7530: Convert to PHYLINK API")
commit 38f790a805 ("net: dsa: mt7530: Add support for port 5")
commit 88bdef8be9 ("net: dsa: mt7530: Extend device data ready for adding
a new hardware")
commit c288575f78 ("net: dsa: mt7530: Add the support of MT7531 switch")
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Acked-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20240122-for-netnext-mt7530-improvements-1-v3-4-042401f2b279@arinc9.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce the p5_sgmii field to store the information for whether port 5
has got SGMII or not. Instead of reading the MT7531_TOP_SIG_SR register
multiple times, the register will be read once and the value will be
stored on the p5_sgmii field. This saves unnecessary reads of the
register.
Move the comment about MT7531AE and MT7531BE to mt7531_setup(), where the
switch is identified.
Get rid of mt7531_dual_sgmii_supported() now that priv->p5_sgmii stores the
information. Address the code where mt7531_dual_sgmii_supported() is used.
Get rid of mt7531_is_rgmii_port() which just prints the opposite of
priv->p5_sgmii.
Instead of calling mt7531_pll_setup() then returning, do not call it if
port 5 is SGMII.
Remove P5_INTF_SEL_GMAC5_SGMII. The p5_interface_select enum is supposed to
represent the mode that port 5 is being used in, not the hardware
information of port 5. Set p5_intf_sel to P5_INTF_SEL_GMAC5 instead, if
port 5 is not dsa_is_unused_port().
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Acked-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20240122-for-netnext-mt7530-improvements-1-v3-3-042401f2b279@arinc9.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use the p5_interface_select enumeration as the data type for the
p5_intf_sel field. This ensures p5_intf_sel can only take the values
defined in the p5_interface_select enumeration.
Remove the explicit assignment of 0 to P5_DISABLED as the first enum item
is automatically assigned 0.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Acked-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20240122-for-netnext-mt7530-improvements-1-v3-2-042401f2b279@arinc9.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
On the MT7530 switch, the CPU_PORT field indicates which CPU port to trap
frames to, regardless of the affinity of the inbound user port.
When multiple CPU ports are in use, if the DSA conduit interface is down,
trapped frames won't be passed to the conduit interface.
To make trapping frames work including this case, implement
ds->ops->conduit_state_change() on this subdriver and set the CPU_PORT
field to the numerically smallest CPU port whose conduit interface is up.
Introduce the active_cpu_ports field to store the information of the active
CPU ports. Correct the macros, CPU_PORT is bits 4 through 6 of the
register.
Add a comment to explain frame trapping for this switch.
Currently, the driver doesn't support the use of multiple CPU ports so this
is not necessarily a bug fix.
Suggested-by: Vladimir Oltean <olteanv@gmail.com>
Suggested-by: Russell King (Oracle) <linux@armlinux.org.uk>
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20240122-for-netnext-mt7530-improvements-1-v3-1-042401f2b279@arinc9.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Per filesystems/sysfs.rst, show() should only use sysfs_emit() or
sysfs_emit_at() when formatting the value to be returned to user space.
coccinelle complains that there are still a couple of functions that use
snprintf(). Convert them to sysfs_emit().
> ./drivers/scsi/pm8001/pm8001_ctl.c:883:8-16: WARNING: please use sysfs_emit
No functional change intended
CC: Jack Wang <jinpu.wang@cloud.ionos.com>
CC: James E.J. Bottomley <jejb@linux.ibm.com>
CC: Martin K. Petersen <martin.petersen@oracle.com>
CC: linux-scsi@vger.kernel.org
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Link: https://lore.kernel.org/r/20240116045151.3940401-32-lizhijian@fujitsu.com
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Per filesystems/sysfs.rst, show() should only use sysfs_emit() or
sysfs_emit_at() when formatting the value to be returned to user space.
coccinelle complains that there are still a couple of functions that use
snprintf(). Convert them to sysfs_emit().
> ./drivers/scsi/isci/init.c:140:8-16: WARNING: please use sysfs_emit
No functional change intended
CC: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
CC: James E.J. Bottomley <jejb@linux.ibm.com>
CC: Martin K. Petersen <martin.petersen@oracle.com>
CC: linux-scsi@vger.kernel.org
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Link: https://lore.kernel.org/r/20240116045151.3940401-25-lizhijian@fujitsu.com
Reviewed-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Per filesystems/sysfs.rst, show() should only use sysfs_emit() or
sysfs_emit_at() when formatting the value to be returned to user space.
coccinelle complains that there are still a couple of functions that use
snprintf(). Convert them to sysfs_emit().
> ./drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c:3619:8-16: WARNING: please use sysfs_emit
> ./drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c:3625:8-16: WARNING: please use sysfs_emit
> ./drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c:3633:8-16: WARNING: please use sysfs_emit
No functional change intended
CC: Michael Cyr <mikecyr@linux.ibm.com>
CC: James E.J. Bottomley <jejb@linux.ibm.com>
CC: Martin K. Petersen <martin.petersen@oracle.com>
CC: linux-scsi@vger.kernel.org
CC: target-devel@vger.kernel.org
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Link: https://lore.kernel.org/r/20240116045151.3940401-24-lizhijian@fujitsu.com
Acked-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Per filesystems/sysfs.rst, show() should only use sysfs_emit() or
sysfs_emit_at() when formatting the value to be returned to user space.
coccinelle complains that there are still a couple of functions that use
snprintf(). Convert them to sysfs_emit().
> ./drivers/scsi/ibmvscsi/ibmvfc.c:3483:8-16: WARNING: please use sysfs_emit
> ./drivers/scsi/ibmvscsi/ibmvfc.c:3493:8-16: WARNING: please use sysfs_emit
> ./drivers/scsi/ibmvscsi/ibmvfc.c:3503:8-16: WARNING: please use sysfs_emit
> ./drivers/scsi/ibmvscsi/ibmvfc.c:3513:8-16: WARNING: please use sysfs_emit
> ./drivers/scsi/ibmvscsi/ibmvfc.c:3522:8-16: WARNING: please use sysfs_emit
> ./drivers/scsi/ibmvscsi/ibmvfc.c:3530:8-16: WARNING: please use sysfs_emit
No functional change intended
CC: Tyrel Datwyler <tyreld@linux.ibm.com>
CC: Michael Ellerman <mpe@ellerman.id.au>
CC: Nicholas Piggin <npiggin@gmail.com>
CC: Christophe Leroy <christophe.leroy@csgroup.eu>
CC: Aneesh Kumar K.V <aneesh.kumar@kernel.org>
CC: Naveen N. Rao <naveen.n.rao@linux.ibm.com>
CC: James E.J. Bottomley <jejb@linux.ibm.com>
CC: Martin K. Petersen <martin.petersen@oracle.com>
CC: linux-scsi@vger.kernel.org
CC: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Link: https://lore.kernel.org/r/20240116045151.3940401-23-lizhijian@fujitsu.com
Acked-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Per filesystems/sysfs.rst, show() should only use sysfs_emit() or
sysfs_emit_at() when formatting the value to be returned to user space.
coccinelle complains that there are still a couple of functions that use
snprintf(). Convert them to sysfs_emit().
> ./drivers/scsi/fnic/fnic_attrs.c:17:8-16: WARNING: please use sysfs_emit
> ./drivers/scsi/fnic/fnic_attrs.c:23:8-16: WARNING: please use sysfs_emit
> ./drivers/scsi/fnic/fnic_attrs.c:31:8-16: WARNING: please use sysfs_emit
No functional change intended
CC: Satish Kharat <satishkh@cisco.com>
CC: Sesidhar Baddela <sebaddel@cisco.com>
CC: Karan Tilak Kumar <kartilak@cisco.com>
CC: James E.J. Bottomley <jejb@linux.ibm.com>
CC: Martin K. Petersen <martin.petersen@oracle.com>
CC: linux-scsi@vger.kernel.org
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Link: https://lore.kernel.org/r/20240116045151.3940401-20-lizhijian@fujitsu.com
Reviewed-by: Karan Tilak Kumar <kartilak@cisco.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
There is a general misunderstanding amongst engineers that {v}snprintf()
returns the length of the data *actually* encoded into the destination
array. However, as per the C99 standard {v}snprintf() really returns
the length of the data that *would have been* written if there were
enough space for it. This misunderstanding has led to buffer-overruns
in the past. It's generally considered safer to use the {v}scnprintf()
variants in their place (or even sprintf() in simple cases). So let's
do that.
Link: https://lwn.net/Articles/69419/
Link: https://github.com/KSPP/linux/issues/105
Cc: Adaptec OEM Raid Solutions <aacraid@microsemi.com>
Cc: PMC-Sierra, Inc <aacraid@pmc-sierra.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20240111131732.1815560-6-lee@kernel.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Since snprintf() has the documented, but still rather strange trait of
returning the length of the data that *would have been* written to the
array if space were available, rather than the arguably more useful
length of data *actually* written, it is usually considered wise to use
something else instead in order to avoid confusion.
In the case of sysfs call-backs, new wrappers exist that do just that.
[mkp: removed unrelated whitespace cleanups]
Link: https://lwn.net/Articles/69419/
Link: https://github.com/KSPP/linux/issues/105
Cc: Richard Hirst <rhirst@linuxcare.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20240111131732.1815560-5-lee@kernel.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Since snprintf() has the documented, but still rather strange trait of
returning the length of the data that *would have been* written to the
array if space were available, rather than the arguably more useful
length of data *actually* written, it is usually considered wise to use
something else instead in order to avoid confusion.
In the case of sysfs call-backs, new wrappers exist that do just that.
Link: https://lwn.net/Articles/69419/
Link: https://github.com/KSPP/linux/issues/105
Cc: Adam Radford <aradford@gmail.com>
Cc: Joel Jacobson <linux@3ware.com>
Cc: de Melo <acme@conectiva.com.br>
Cc: Andre Hedrick <andre@suse.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20240111131732.1815560-4-lee@kernel.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Since snprintf() has the documented, but still rather strange trait of
returning the length of the data that *would have been* written to the
array if space were available, rather than the arguably more useful
length of data *actually* written, it is usually considered wise to use
something else instead in order to avoid confusion.
In the case of sysfs call-backs, new wrappers exist that do just that.
Link: https://lwn.net/Articles/69419/
Link: https://github.com/KSPP/linux/issues/105
Cc: Adam Radford <aradford@gmail.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20240111131732.1815560-3-lee@kernel.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Since snprintf() has the documented, but still rather strange trait of
returning the length of the data that *would have been* written to the
array if space were available, rather than the arguably more useful
length of data *actually* written, it is usually considered wise to use
something else instead in order to avoid confusion.
In the case of sysfs call-backs, new wrappers exist that do just that.
Link: https://lwn.net/Articles/69419/
Link: https://github.com/KSPP/linux/issues/105
Cc: Adam Radford <aradford@gmail.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20240111131732.1815560-2-lee@kernel.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When __queue_delayed_work() is called, it chooses a cpu for handling the
timer interrupt. As of today, it will pick either the cpu passed as
parameter or the last cpu used for this.
This is not good if a system does use CPU isolation, because it can take
away some valuable cpu time to:
1 - deal with the timer interrupt,
2 - schedule-out the desired task,
3 - queue work on a random workqueue, and
4 - schedule the desired task back to the cpu.
So to fix this, during __queue_delayed_work(), if cpu isolation is in
place, pick a random non-isolated cpu to handle the timer interrupt.
As an optimization, if the current cpu is not isolated, use it instead
of looking for another candidate.
Signed-off-by: Leonardo Bras <leobras@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
or aren't considered appropriate for backporting.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZbdSnwAKCRDdBJ7gKXxA
jv49AQCY8eLOgE0L+25HZm99HleBwapbKJozcmsXgMPlgeFZHgEA8saExeL+Nzae
6ktxmGXoVw2t3FJ67Zr66VE3EyHVKAY=
=HWuo
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2024-01-28-23-21' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"22 hotfixes. 11 are cc:stable and the remainder address post-6.7
issues or aren't considered appropriate for backporting"
* tag 'mm-hotfixes-stable-2024-01-28-23-21' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (22 commits)
mm: thp_get_unmapped_area must honour topdown preference
mm: huge_memory: don't force huge page alignment on 32 bit
userfaultfd: fix mmap_changing checking in mfill_atomic_hugetlb
selftests/mm: ksm_tests should only MADV_HUGEPAGE valid memory
scs: add CONFIG_MMU dependency for vfree_atomic()
mm/memory: fix folio_set_dirty() vs. folio_mark_dirty() in zap_pte_range()
mm/huge_memory: fix folio_set_dirty() vs. folio_mark_dirty()
selftests/mm: Update va_high_addr_switch.sh to check CPU for la57 flag
selftests: mm: fix map_hugetlb failure on 64K page size systems
MAINTAINERS: supplement of zswap maintainers update
stackdepot: make fast paths lock-less again
stackdepot: add stats counters exported via debugfs
mm, kmsan: fix infinite recursion due to RCU critical section
mm/writeback: fix possible divide-by-zero in wb_dirty_limits(), again
selftests/mm: switch to bash from sh
MAINTAINERS: add man-pages git trees
mm: memcontrol: don't throttle dying tasks on memory.high
mm: mmap: map MAP_STACK to VM_NOHUGEPAGE
uprobes: use pagesize-aligned virtual address when replacing pages
selftests/mm: mremap_test: fix build warning
...
Google GS101: Correct the input clock names to CMU MISC clock controller
to match received review. The review was initially missed and CMU MISC
clock controller bindings, driver and DTS was merged into v6.8-rc1 with
different names. Nothing was released so far, so the bindings and
driver can be still corrected to match review.
-----BEGIN PGP SIGNATURE-----
iQJEBAABCgAuFiEE3dJiKD0RGyM7briowTdm5oaLg9cFAmWyGtwQHGtyemtAa2Vy
bmVsLm9yZwAKCRDBN2bmhouD1+9tD/49fHDdJX181v2uGGyFx/573p6s93cQUCSY
SLU9c2K9qnErbaiYude1xZdEF7De5Y10U/+pBUF7UnXXUdtvn0UFuyBNQfcT7A0E
2S/pG7QMT6y+uoU9M8kMSuoTVnppzLhbng60bvW16b0n9KjIwoSxus95+eioQfJ4
c2pOsEW9esddVnRopdKNp1+ZlYPybQJgfHFMqxQwo15Uv2jSMTOeM1LobPrVGUUJ
172kQb2b5NreOFrxFkJKIna91i9PWRM4JUWtnHv/WcbWiNEixHStcOzC1qjx0qkK
0Jm00Lvgh/5cwnqIKrlGNLdw7CyUCsCxpsGsP7HDHvFiBF1+s6Uw3UMQ+vlPHLSX
TuTCUPjQ9RdakxSbM00zcAjos0uNineCw0cpJ4G9TDCHBhTGQcIMIelCU+qVaBED
HBqLhOS1dsLEeyMAcP2Y7pzYS3uLy/3Z37Kmt6GGgOxOBqtMzIbG5I3Xo3oU1AIY
sUw6X1F6Lq02Eo8RB9j50/a6bTqKWBYYg5mKNGEpCetInqZX7JoLVXCoZ6n/1SYh
4zdLU04nUKM3ZsFkRxnAWkOLudBJBBd0/QfvbLcTxpFjT5emNulgV/OAsNdWpiTF
HW3bI/ztKl+VG9cXjYMeNc0I1HmbiTi6Y2n1wPKa6GY/OgLlAPDGj6HOBCCBAuUw
beK6DTbA5w==
=Tvym
-----END PGP SIGNATURE-----
Merge tag 'samsung-clk-fixes-6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into clk-fixes
Pull Samsung clk fixes from Krzysztof Kozlowski:
Google GS101: Correct the input clock names to CMU MISC clock controller
to match received review. The review was initially missed and CMU MISC
clock controller bindings, driver and DTS was merged into v6.8-rc1 with
different names. Nothing was released so far, so the bindings and
driver can be still corrected to match review.
* tag 'samsung-clk-fixes-6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
clk: samsung: clk-gs101: comply with the new dt cmu_misc clock names
dt-bindings: clock: gs101: rename cmu_misc clock-names
The generated bpf_helper_defs.h file currently contains definitions
like this for the kernel helpers, which are static objects:
static void *(*bpf_map_lookup_elem)(void *map, const void *key) = (void *) 1;
These work well in both clang and GCC because both compilers do
constant propagation with -O1 and higher optimization, resulting in
`call 1' BPF instructions being generated, which are calls to kernel
helpers.
However, there is a discrepancy on how the -Wunused-variable
warning (activated by -Wall) is handled in these compilers:
- clang will not emit -Wunused-variable warnings for static variables
defined in C header files, be them constant or not constant.
- GCC will not emit -Wunused-variable warnings for _constant_ static
variables defined in header files, but it will emit warnings for
non-constant static variables defined in header files.
There is no reason for these bpf_helpers_def.h pointers to not be
declared constant, and it is actually desirable to do so, since their
values are not to be changed. So this patch modifies bpf_doc.py to
generate prototypes like:
static void *(* const bpf_map_lookup_elem)(void *map, const void *key) = (void *) 1;
This allows GCC to not error while compiling BPF programs with `-Wall
-Werror', while still being able to detect and error on legitimate
unused variables in the program themselves.
This change doesn't impact the desired constant propagation in neither
Clang nor GCC with -O1 and higher. On the contrary, being declared as
constant may increase the odds they get constant folded when
used/referred to in certain circumstances.
Tested in bpf-next master.
No regressions.
Signed-off-by: Jose E. Marchesi <jose.marchesi@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/bpf/20240127185031.29854-1-jose.marchesi@oracle.com
As CONFIG_DEBUG_INFO_BTF is default off the existing "failed to find
valid kernel BTF" message makes diagnosing the kernel build issue somewhat
cryptic. Add a little more detail with the hope of helping users.
Before:
```
libbpf: failed to find valid kernel BTF
libbpf: Error loading vmlinux BTF: -3
```
After not accessible:
```
libbpf: kernel BTF is missing at '/sys/kernel/btf/vmlinux', was CONFIG_DEBUG_INFO_BTF enabled?
libbpf: failed to find valid kernel BTF
libbpf: Error loading vmlinux BTF: -3
```
After not readable:
```
libbpf: failed to read kernel BTF from (/sys/kernel/btf/vmlinux): -1
```
Closes: https://lore.kernel.org/bpf/CAP-5=fU+DN_+Y=Y4gtELUsJxKNDDCOvJzPHvjUVaUoeFAzNnig@mail.gmail.com/
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240125231840.1647951-1-irogers@google.com
The layout is configured as:
- Link0: CS42L43 Jack and mics (2ch)
- Link2: 2x CS35L56 Speaker (amps 3 and 4, right)
- Link3: 2x CS35L56 Speaker (amps 1 and 2, left)
Corresponding SOF topology:
https://github.com/thesofproject/sof/pull/8773
Signed-off-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Link: https://msgid.link/r/20240123113246.75539-1-mstrozek@opensource.cirrus.com
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove the duplicate check on type and unify result.
Signed-off-by: Florian Lehner <dev@der-flo.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/bpf/20240120150920.3370-1-dev@der-flo.net
Certain BPF selftests contain code that, albeit being legal C, trigger
warnings in GCC that cannot be disabled. This is the case for example
for the tests
progs/btf_dump_test_case_bitfields.c
progs/btf_dump_test_case_namespacing.c
progs/btf_dump_test_case_packing.c
progs/btf_dump_test_case_padding.c
progs/btf_dump_test_case_syntax.c
which contain struct type declarations inside function parameter
lists. This is problematic, because:
- The BPF selftests are built with -Werror.
- The Clang and GCC compilers sometimes differ when it comes to handle
warnings. in the handling of warnings. One compiler may emit
warnings for code that the other compiles compiles silently, and one
compiler may offer the possibility to disable certain warnings, while
the other doesn't.
In order to overcome this problem, this patch modifies the
tools/testing/selftests/bpf/Makefile in order to:
1. Enable the possibility of specifing per-source-file extra CFLAGS.
This is done by defining a make variable like:
<source-filename>-CFLAGS := <whateverflags>
And then modifying the proper Make rule in order to use these flags
when compiling <source-filename>.
2. Use the mechanism above to add -Wno-error to CFLAGS for the
following selftests:
progs/btf_dump_test_case_bitfields.c
progs/btf_dump_test_case_namespacing.c
progs/btf_dump_test_case_packing.c
progs/btf_dump_test_case_padding.c
progs/btf_dump_test_case_syntax.c
Note the corresponding -CFLAGS variables for these files are
defined only if the selftests are being built with GCC.
Note that, while compiler pragmas can generally be used to disable
particular warnings per file, this 1) is only possible for warning
that actually can be disabled in the command line, i.e. that have
-Wno-FOO options, and 2) doesn't apply to -Wno-error.
Tested in bpf-next master branch.
No regressions.
Signed-off-by: Jose E. Marchesi <jose.marchesi@oracle.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240127100702.21549-1-jose.marchesi@oracle.com
The PCI AER model is an awkward fit for CXL error handling. While the
expectation is that a PCI device can escalate to link reset to recover
from an AER event, the same reset on CXL amounts to a surprise memory
hotplug of massive amounts of memory.
At present, the CXL error handler attempts some optimistic error
handling to unbind the device from the cxl_mem driver after reaping some
RAS register values. This results in a "hopeful" attempt to unplug the
memory, but there is no guarantee that will succeed.
A subsequent AER notification after the memdev unbind event can no
longer assume the registers are mapped. Check for memdev bind before
reaping status register values to avoid crashes of the form:
BUG: unable to handle page fault for address: ffa00000195e9100
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
[...]
RIP: 0010:__cxl_handle_ras+0x30/0x110 [cxl_core]
[...]
Call Trace:
<TASK>
? __die+0x24/0x70
? page_fault_oops+0x82/0x160
? kernelmode_fixup_or_oops+0x84/0x110
? exc_page_fault+0x113/0x170
? asm_exc_page_fault+0x26/0x30
? __pfx_dpc_reset_link+0x10/0x10
? __cxl_handle_ras+0x30/0x110 [cxl_core]
? find_cxl_port+0x59/0x80 [cxl_core]
cxl_handle_rp_ras+0xbc/0xd0 [cxl_core]
cxl_error_detected+0x6c/0xf0 [cxl_core]
report_error_detected+0xc7/0x1c0
pci_walk_bus+0x73/0x90
pcie_do_recovery+0x23f/0x330
Longer term, the unbind and PCI_ERS_RESULT_DISCONNECT behavior might
need to be replaced with a new PCI_ERS_RESULT_PANIC.
Fixes: 6ac07883db ("cxl/pci: Add RCH downstream port error logging")
Cc: stable@vger.kernel.org
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Li Ming <ming4.li@intel.com>
Link: https://lore.kernel.org/r/20240129131856.2458980-1-ming4.li@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
In s390, CI reported that the sock_iter_batch selftest
hits this error very often:
2024-01-26T16:56:49.3091804Z Bind /proc/self/ns/net -> /run/netns/sock_iter_batch_netns failed: No such file or directory
2024-01-26T16:56:49.3149524Z Cannot remove namespace file "/run/netns/sock_iter_batch_netns": No such file or directory
2024-01-26T16:56:49.3772213Z test_sock_iter_batch:FAIL:ip netns add sock_iter_batch_netns unexpected error: 256 (errno 0)
It happens very often in s390 but Manu also noticed it happens very
sparsely in other arch also.
It turns out the default dash shell does not recognize "&>"
as a redirection operator, so the command went to the background.
In the sock_iter_batch selftest, the "ip netns delete" went
into background and then race with the following "ip netns add"
command.
This patch replaces the "&> /dev/null" usage with ">/dev/null 2>&1"
and does this redirection in the SYS_NOFAIL macro instead of doing
it individually by its caller. The SYS_NOFAIL callers do not care
about failure, so it is no harm to do this redirection even if
some of the existing callers do not redirect to /dev/null now.
It touches different test files, so I skipped the Fixes tags
in this patch. Some of the changed tests do not use "&>"
but they use the SYS_NOFAIL, so these tests are also
changed to avoid doing its own redirection because
SYS_NOFAIL does it internally now.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20240127025017.950825-1-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
use helper macro HW_ERR to instead of Hardware error string.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Replace the hard-coded numbers with macro definition
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Add control flag for IPS residency profiling
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Anthony Koo <anthony.koo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
There exists scenarios where the split index for subvp can be
pipe index 0. The assumption in FW is that the split index
won't be 0 but this is incorrect.
[how]
Instead populate non-split cases to be 0xF to differentiate
between split and non-split.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
odm calculation is missing for pipe split policy determination
and cause Underflow/Corruption issue.
[how]
Add the odm calculation.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
To Remove warnings of clk_mgr.
[How]
Added code to remove warnings by resolving redefinations.
Reviewed-by: Martin Leung <martin.leung@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Mounika Adhuri <moadhuri@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Audio channel layout for 5.1ch is not correct
[how]
Add the audio layout for 5.1ch (channel_count = 6).
Add divided by zero check.
Reviewed-by: Zhan Liu <zhan.liu@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
On 14us for exit latency time causes underflow for 8K monitor with HDR on.
Increasing the latency to 28us fixes the underflow.
[How]
Increase the latency to 28us. This workaround should be sufficient
before we figure out why SR exit so long.
Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Nicholas Susanto <nicholas.susanto@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
In current code, we recognize a pipe as a phantom pipe if it references
the same phantom stream. However it can also a phantom split pipe.
If the phantom split pipe has a smaller pipe index than the phantom pipe
we will mistakenly use the phantom split pipe as the phantom pipe. This
causes an incorrect subvp configuration where the first half of the
screen is flashing solid white image.
[how]
Add additional check that the pipe needs to be an OTG master pipe.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
MAX_SURFACES is per stream, while MAX_PLANES is per asic. The
mpc_combine is an array that records all the planes per asic. Therefore
MAX_PLANES should be used as the array size. Using MAX_SURFACES causes
array overflow when there are more than 3 planes.
[how]
Use the MAX_PLANES for the mpc_combine array size.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Reviewed-by: Nevenko Stupar <nevenko.stupar@amd.com>
Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Secondary DP2 display fails to light up in some instances
[How]
Clock needs to be on when DPSTREAMCLK*_EN =1. This change
moves dtbclk_p enable/disable point to make sure this is
the case
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Daniel Miess <daniel.miess@amd.com>
Signed-off-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Unguarded SMU and CLK IP access cause issue on FPGA
[How]
Guard them for FPGA environment
Reviewed-by: Sung joon Kim <sungjoon.kim@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Eric Yang <eric.yang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
1. To watch dmcub inbox1 ring buffer cmd type without tools
2. dmub_cmd_PLAT_54186_wa 66 bytes
[How]
Added dmcub cmd type enum: unsigned char for debug use only,
also fixed 66 bytes issue by using unsigned int in bit
define instead of unsigned char.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Fudongwang <fudong.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Previous patch to allow DTBCLK disable didn't address boot case. Driver
thinks DTBCLK is disabled by default, so we don't send disable message to
PMFW. DTBCLK is then enabled at idle desktop on boot, burning power.
[How]
Set dtbclk_en to true on boot so that disable message is sent during first
commit.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Taimur Hassan <syed.hassan@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
BIOS's integration info table not following the original order
which is phy instance is ext_displaypath's array index.
[how]
Move them to follow the original order.
Reviewed-by: Muhammad Ahmed <ahmed.ahmed@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
fix reading edp rx crc timeout failure. after
bootup, kernel setup psr with dpcd 0x170 = 5. this
notify rx psr enable and let rx fw start checking crc
for fw internal logic. rx fw may not update crc read
count within dpcd 0x246. read count is always 0. this
will lead tx crc reading timeout.
[How]
add debugfs to let test app to disbable rx crc
checking for rx internal logic. then test app can read
rx crc dpcd 0x246 successfully.
expected app sequence is as below:
1. disable eDP PHY and notify eDP rx with dpcd 0x600 = 2.
2. echo 0x1 /sys/kernel/debug/dri/0/eDP-X/disallow_edp_enter_psr
3. enable eDP PHY and notify eDP rx with dpcd 0x600 = 1 but
without dpcd 0x170 = 5.
4. read crc from rx dpcd 0x270, 0x246, etc.
5. echo 0x0 /sys/kernel/debug/dri/0/eDP-X/disallow_edp_enter_psr.
this will let eDP back to normal with psr setup dpcd 0x170 = 5.
Reviewed-by: Wayne Lin <wayne.lin@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>