Commit graph

1,264,895 commits

Author SHA1 Message Date
Linus Walleij
ac631873c9 net: ethernet: cortina: Drop TSO support
The recent change to allow large frames without hardware checksumming
slotted in software checksumming in the driver if hardware could not
do it.

This will however upset TSO (TCP Segment Offloading). Typical
error dumps includes this:

skb len=2961 headroom=222 headlen=66 tailroom=0
(...)
WARNING: CPU: 0 PID: 956 at net/core/dev.c:3259 skb_warn_bad_offload+0x7c/0x108
gemini-ethernet-port: caps=(0x0000010000154813, 0x00002007ffdd7889)

And the packets do not go through.

The TSO implementation is bogus: a TSO enabled driver must propagate
the skb_shinfo(skb)->gso_size value to the TSO engine on the NIC.

Drop the size check and TSO offloading features for now: this
needs to be fixed up properly.

After this ethernet works fine on Gemini devices with a direct connected
PHY such as D-Link DNS-313.

Also tested to still be working with a DSA switch using the Gemini
ethernet as conduit interface.

Link: https://lore.kernel.org/netdev/CANn89iJLfxng1sYL5Zk0mknXpyYQPCp83m3KgD2KJ2_hKCpEUg@mail.gmail.com/
Suggested-by: Eric Dumazet <edumazet@google.com>
Fixes: d4d0c5b4d2 ("net: ethernet: cortina: Handle large frames")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-07 16:05:00 +00:00
Petr Tesarik
61921bdaa1 net: stmmac: fix ethtool per-queue statistics
Fix per-queue statistics for devices with more than one queue.

The output data pointer is currently reset in each loop iteration,
effectively summing all queue statistics in the first four u64 values.

The summary values are not even labeled correctly. For example, if eth0 has
2 queues, ethtool -S eth0 shows:

     q0_tx_pkt_n: 374 (actually tx_pkt_n over all queues)
     q0_tx_irq_n: 23  (actually tx_normal_irq_n over all queues)
     q1_tx_pkt_n: 462 (actually rx_pkt_n over all queues)
     q1_tx_irq_n: 446 (actually rx_normal_irq_n over all queues)
     q0_rx_pkt_n: 0
     q0_rx_irq_n: 0
     q1_rx_pkt_n: 0
     q1_rx_irq_n: 0

Fixes: 133466c3bb ("net: stmmac: use per-queue 64 bit statistics where necessary")
Cc: stable@vger.kernel.org
Signed-off-by: Petr Tesarik <petr@tesarici.cz>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-07 15:30:20 +00:00
Eric Dumazet
d375b98e02 ip6_tunnel: fix NEXTHDR_FRAGMENT handling in ip6_tnl_parse_tlv_enc_lim()
syzbot pointed out [1] that NEXTHDR_FRAGMENT handling is broken.

Reading frag_off can only be done if we pulled enough bytes
to skb->head. Currently we might access garbage.

[1]
BUG: KMSAN: uninit-value in ip6_tnl_parse_tlv_enc_lim+0x94f/0xbb0
ip6_tnl_parse_tlv_enc_lim+0x94f/0xbb0
ipxip6_tnl_xmit net/ipv6/ip6_tunnel.c:1326 [inline]
ip6_tnl_start_xmit+0xab2/0x1a70 net/ipv6/ip6_tunnel.c:1432
__netdev_start_xmit include/linux/netdevice.h:4940 [inline]
netdev_start_xmit include/linux/netdevice.h:4954 [inline]
xmit_one net/core/dev.c:3548 [inline]
dev_hard_start_xmit+0x247/0xa10 net/core/dev.c:3564
__dev_queue_xmit+0x33b8/0x5130 net/core/dev.c:4349
dev_queue_xmit include/linux/netdevice.h:3134 [inline]
neigh_connected_output+0x569/0x660 net/core/neighbour.c:1592
neigh_output include/net/neighbour.h:542 [inline]
ip6_finish_output2+0x23a9/0x2b30 net/ipv6/ip6_output.c:137
ip6_finish_output+0x855/0x12b0 net/ipv6/ip6_output.c:222
NF_HOOK_COND include/linux/netfilter.h:303 [inline]
ip6_output+0x323/0x610 net/ipv6/ip6_output.c:243
dst_output include/net/dst.h:451 [inline]
ip6_local_out+0xe9/0x140 net/ipv6/output_core.c:155
ip6_send_skb net/ipv6/ip6_output.c:1952 [inline]
ip6_push_pending_frames+0x1f9/0x560 net/ipv6/ip6_output.c:1972
rawv6_push_pending_frames+0xbe8/0xdf0 net/ipv6/raw.c:582
rawv6_sendmsg+0x2b66/0x2e70 net/ipv6/raw.c:920
inet_sendmsg+0x105/0x190 net/ipv4/af_inet.c:847
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg net/socket.c:745 [inline]
____sys_sendmsg+0x9c2/0xd60 net/socket.c:2584
___sys_sendmsg+0x28d/0x3c0 net/socket.c:2638
__sys_sendmsg net/socket.c:2667 [inline]
__do_sys_sendmsg net/socket.c:2676 [inline]
__se_sys_sendmsg net/socket.c:2674 [inline]
__x64_sys_sendmsg+0x307/0x490 net/socket.c:2674
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0x44/0x110 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x63/0x6b

Uninit was created at:
slab_post_alloc_hook+0x129/0xa70 mm/slab.h:768
slab_alloc_node mm/slub.c:3478 [inline]
__kmem_cache_alloc_node+0x5c9/0x970 mm/slub.c:3517
__do_kmalloc_node mm/slab_common.c:1006 [inline]
__kmalloc_node_track_caller+0x118/0x3c0 mm/slab_common.c:1027
kmalloc_reserve+0x249/0x4a0 net/core/skbuff.c:582
pskb_expand_head+0x226/0x1a00 net/core/skbuff.c:2098
__pskb_pull_tail+0x13b/0x2310 net/core/skbuff.c:2655
pskb_may_pull_reason include/linux/skbuff.h:2673 [inline]
pskb_may_pull include/linux/skbuff.h:2681 [inline]
ip6_tnl_parse_tlv_enc_lim+0x901/0xbb0 net/ipv6/ip6_tunnel.c:408
ipxip6_tnl_xmit net/ipv6/ip6_tunnel.c:1326 [inline]
ip6_tnl_start_xmit+0xab2/0x1a70 net/ipv6/ip6_tunnel.c:1432
__netdev_start_xmit include/linux/netdevice.h:4940 [inline]
netdev_start_xmit include/linux/netdevice.h:4954 [inline]
xmit_one net/core/dev.c:3548 [inline]
dev_hard_start_xmit+0x247/0xa10 net/core/dev.c:3564
__dev_queue_xmit+0x33b8/0x5130 net/core/dev.c:4349
dev_queue_xmit include/linux/netdevice.h:3134 [inline]
neigh_connected_output+0x569/0x660 net/core/neighbour.c:1592
neigh_output include/net/neighbour.h:542 [inline]
ip6_finish_output2+0x23a9/0x2b30 net/ipv6/ip6_output.c:137
ip6_finish_output+0x855/0x12b0 net/ipv6/ip6_output.c:222
NF_HOOK_COND include/linux/netfilter.h:303 [inline]
ip6_output+0x323/0x610 net/ipv6/ip6_output.c:243
dst_output include/net/dst.h:451 [inline]
ip6_local_out+0xe9/0x140 net/ipv6/output_core.c:155
ip6_send_skb net/ipv6/ip6_output.c:1952 [inline]
ip6_push_pending_frames+0x1f9/0x560 net/ipv6/ip6_output.c:1972
rawv6_push_pending_frames+0xbe8/0xdf0 net/ipv6/raw.c:582
rawv6_sendmsg+0x2b66/0x2e70 net/ipv6/raw.c:920
inet_sendmsg+0x105/0x190 net/ipv4/af_inet.c:847
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg net/socket.c:745 [inline]
____sys_sendmsg+0x9c2/0xd60 net/socket.c:2584
___sys_sendmsg+0x28d/0x3c0 net/socket.c:2638
__sys_sendmsg net/socket.c:2667 [inline]
__do_sys_sendmsg net/socket.c:2676 [inline]
__se_sys_sendmsg net/socket.c:2674 [inline]
__x64_sys_sendmsg+0x307/0x490 net/socket.c:2674
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0x44/0x110 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x63/0x6b

CPU: 0 PID: 7345 Comm: syz-executor.3 Not tainted 6.7.0-rc8-syzkaller-00024-gac865f00af29 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/17/2023

Fixes: fbfa743a9d ("ipv6: fix ip6_tnl_parse_tlv_enc_lim()")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-07 15:27:29 +00:00
David Howells
4fc68c4c1a rxrpc: Fix skbuff cleanup of call's recvmsg_queue and rx_oos_queue
Fix rxrpc_cleanup_ring() to use rxrpc_purge_queue() rather than
skb_queue_purge() so that the count of outstanding skbuffs is correctly
updated when a failed call is cleaned up.

Without this rmmod may hang waiting for rxrpc_n_rx_skbs to become zero.

Fixes: 5d7edbc923 ("rxrpc: Get rid of the Rx ring")
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-07 15:25:30 +00:00
Asmaa Mnebhi
a460f4a684 mlxbf_gige: Enable the GigE port in mlxbf_gige_open
At the moment, the GigE port is enabled in the mlxbf_gige_probe
function. If the mlxbf_gige_open is not executed, this could cause
pause frames to increase in the case where there is high backgroud
traffic. This results in clogging the port.
So move enabling the OOB port to mlxbf_gige_open.

Fixes: f92e1869d7 ("Add Mellanox BlueField Gigabit Ethernet driver")
Reviewed-by: David Thompson <davthompson@nvidia.com>
Signed-off-by: Asmaa Mnebhi <asmaa@nvidia.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-07 15:20:28 +00:00
Asmaa Mnebhi
ef210ef85d mlxbf_gige: Fix intermittent no ip issue
Although the link is up, there is no ip assigned on setups with high background
traffic. Nothing is transmitted nor received. The RX error count keeps on
increasing. After several minutes, the RX error count stagnates and the
GigE interface finally gets an ip.

The issue is that mlxbf_gige_rx_init() is called before phy_start().
As soon as the RX DMA is enabled in mlxbf_gige_rx_init(), the RX CI reaches the max
of 128, and becomes equal to RX PI. RX CI doesn't decrease since the code hasn't
ran phy_start yet.
Bring the PHY up before starting the RX.

Fixes: f92e1869d7 ("Add Mellanox BlueField Gigabit Ethernet driver")
Reviewed-by: David Thompson <davthompson@nvidia.com>
Signed-off-by: Asmaa Mnebhi <asmaa@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-07 15:18:47 +00:00
Zhengchao Shao
c4a5ee9c09 fib: rules: remove repeated assignment in fib_nl2rule
In fib_nl2rule(), 'err' variable has been set to -EINVAL during
declaration, and no need to set the 'err' variable to -EINVAL again.
So, remove it.

Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-07 15:16:19 +00:00
Pedro Tammela
405cd9fc6f net/sched: simplify tc_action_load_ops parameters
Instead of using two bools derived from a flags passed as arguments to
the parent function of tc_action_load_ops, just pass the flags itself
to tc_action_load_ops to simplify its parameters.

Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-07 14:58:26 +00:00
Christophe JAILLET
363096a27f nfp: flower: Remove usage of the deprecated ida_simple_xx() API
ida_alloc() and ida_free() should be preferred to the deprecated
ida_simple_get() and ida_simple_remove().

This is less verbose.

Note that the upper bound of ida_alloc_range() is inclusive while the one
of ida_simple_get() was exclusive.
So NFP_FL_LAG_GROUP_MAX has been decreased by 1. It now better watch the
comment stating that "1 to 31 are valid".

The only other user of NFP_FL_LAG_GROUP_MAX has been updated accordingly in
nfp_fl_lag_put_unprocessed().

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-07 13:02:44 +00:00
Michael Margolin
2307157c85 RDMA/efa: Add EFA query MR support
Add EFA driver uapi definitions and register a new query MR method that
currently returns the physical interconnects the device is using to
reach the MR. Update admin definitions and efa-abi accordingly.

Reviewed-by: Anas Mousa <anasmous@amazon.com>
Reviewed-by: Firas Jahjah <firasj@amazon.com>
Signed-off-by: Michael Margolin <mrgolin@amazon.com>
Link: https://lore.kernel.org/r/20240104095155.10676-1-mrgolin@amazon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
2024-01-07 12:02:27 +02:00
Tanzir Hasan
5850edccec android: removed duplicate linux/errno
There are two linux/errno.h inclusions in this file. The second one has
been removed and the file builds correctly.

Fixes: 54ffdab820 ("android: binder: binderfs.c: removed asm-generic/errno-base.h")
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Tanzir Hasan <tanzirh@google.com>
Acked-by: Carlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20240104-removeduperror-v1-1-d170d4b3675a@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-07 09:48:26 +01:00
Li Nan
adbf4c4954 ubi: block: fix memleak in ubiblock_create()
If idr_alloc() fails, dev->gd will be put after goto out_cleanup_disk in
ubiblock_create(), but dev->gd has not been assigned yet at this time, and
'gd' will not be put anymore. Fix it by putting 'gd' directly.

Signed-off-by: Li Nan <linan122@huawei.com>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2024-01-06 23:52:51 +01:00
Randy Dunlap
ac8e9f64f5 ubifs: fix kernel-doc warnings
Fix kernel-doc warnings found when using "W=1".

file.c:1385: warning: Excess function parameter 'time' description in 'ubifs_update_time'
and 9 warnings like this one:
file.c:326: warning: No description found for return value of 'allocate_budget'

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202312030417.66c5PwHj-lkp@intel.com/
Cc: Richard Weinberger <richard@nod.at>
Cc: linux-mtd@lists.infradead.org
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
[rw: massaged patch to resolve conflict ]
Signed-off-by: Richard Weinberger <richard@nod.at>
2024-01-06 23:49:50 +01:00
ZhaoLong Wang
2fe48aaab2 mtd: Add several functions to the fail_function list
add mtd_read(), mtd_write(), mtd_erase(), mtd_block_markbad() to
fail_function list for testing purpose

- Specify the function to inject the fault
echo mtd_read > /sys/kernel/debug/fail_function/inject

- Specifies the return value of the function to inject the fault
printf %#x -12 > /sys/kernel/debug/fail_function/mtd_read/retval

- Specify other fault injection configuration parameters.
echo -1 > /sys/kernel/debug/fail_function/times
echo 100 > /sys/kernel/debug/fail_function/probability
echo 15 > /sys/kernel/debug/fail_function/space

Signed-off-by: ZhaoLong Wang <wangzhaolong1@huawei.com>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2024-01-06 23:47:07 +01:00
ZhaoLong Wang
4d0deb380a ubi: Reserve sufficient buffer length for the input mask
Because the mask received by the emulate_failures interface
is a 32-bit unsigned integer, ensure that there is sufficient
buffer length to receive and display this value.

Signed-off-by: ZhaoLong Wang <wangzhaolong1@huawei.com>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2024-01-06 23:45:44 +01:00
ZhaoLong Wang
7cd8d1f847 ubi: Add six fault injection type for testing
This commit adds six fault injection type for testing to cover the
abnormal path of the UBI driver.

Inject the following faults when the UBI reads the LEB:
 +----------------------------+-----------------------------------+
 |    Interface name          |       emulate behavior            |
 +----------------------------+-----------------------------------+
 |  emulate_eccerr            | ECC error                         |
 +----------------------------+-----------------------------------+
 |  emulate_read_failure      | read failure                      |
 |----------------------------+-----------------------------------+
 |  emulate_io_ff             | read content as all FF            |
 |----------------------------+-----------------------------------+
 |  emulate_io_ff_bitflips    | content FF with MTD err reported  |
 +----------------------------+-----------------------------------+
 |  emulate_bad_hdr           | bad leb header                    |
 |----------------------------+-----------------------------------+
 |  emulate_bad_hdr_ebadmsg   | bad header with ECC err           |
 +----------------------------+-----------------------------------+

Signed-off-by: ZhaoLong Wang <wangzhaolong1@huawei.com>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2024-01-06 23:41:40 +01:00
ZhaoLong Wang
e30948f7c0 ubi: Split io_failures into write_failure and erase_failure
The emulate_io_failures debugfs entry controls both write
failure and erase failure. This patch split io_failures
to write_failure and erase_failure.

Signed-off-by: ZhaoLong Wang <wangzhaolong1@huawei.com>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2024-01-06 23:39:29 +01:00
ZhaoLong Wang
6931fb4485 ubi: Use the fault injection framework to enhance the fault injection capability
To make debug parameters configurable at run time, use the
fault injection framework to reconstruct the debugfs interface,
and retain the legacy fault injection interface.

Now, the file emulate_failures and fault_attr files control whether
to enable fault emmulation.

The file emulate_failures receives a mask that controls type and
process of fault injection. Generally, for ease of use, you can
directly enter a mask with all 1s.

echo 0xffff > /sys/kernel/debug/ubi/ubi0/emulate_failures

And you need to configure other fault-injection capabilities for
testing purpose:

echo 100 > /sys/kernel/debug/ubi/fault_inject/emulate_power_cut/probability
echo 15 > /sys/kernel/debug/ubi/fault_inject/emulate_power_cut/space
echo 2 > /sys/kernel/debug/ubi/fault_inject/emulate_power_cut/verbose
echo -1 > /sys/kernel/debug/ubi/fault_inject/emulate_power_cut/times

The CONFIG_MTD_UBI_FAULT_INJECTION to enable the Fault Injection is
added to kconfig.

Signed-off-by: ZhaoLong Wang <wangzhaolong1@huawei.com>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2024-01-06 23:38:55 +01:00
Zhihao Cheng
1e022216dc ubifs: ubifs_symlink: Fix memleak of inode->i_link in error path
For error handling path in ubifs_symlink(), inode will be marked as
bad first, then iput() is invoked. If inode->i_link is initialized by
fscrypt_encrypt_symlink() in encryption scenario, inode->i_link won't
be freed by callchain ubifs_free_inode -> fscrypt_free_inode in error
handling path, because make_bad_inode() has changed 'inode->i_mode' as
'S_IFREG'.
Following kmemleak is easy to be reproduced by injecting error in
ubifs_jnl_update() when doing symlink in encryption scenario:
 unreferenced object 0xffff888103da3d98 (size 8):
  comm "ln", pid 1692, jiffies 4294914701 (age 12.045s)
  backtrace:
   kmemdup+0x32/0x70
   __fscrypt_encrypt_symlink+0xed/0x1c0
   ubifs_symlink+0x210/0x300 [ubifs]
   vfs_symlink+0x216/0x360
   do_symlinkat+0x11a/0x190
   do_syscall_64+0x3b/0xe0
There are two ways fixing it:
 1. Remove make_bad_inode() in error handling path. We can do that
    because ubifs_evict_inode() will do same processes for good
    symlink inode and bad symlink inode, for inode->i_nlink checking
    is before is_bad_inode().
 2. Free inode->i_link before marking inode bad.
Method 2 is picked, it has less influence, personally, I think.

Cc: stable@vger.kernel.org
Fixes: 2c58d548f5 ("fscrypt: cache decrypted symlink target in ->i_link")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Suggested-by: Eric Biggers <ebiggers@kernel.org>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2024-01-06 23:34:56 +01:00
Linus Torvalds
52b1853b08 Improve the detection when to run atomic transfer handlers for kernels
with preemption disabled. This removes some false positive splats a
 number of users were seeing if their driver didn't have support for
 atomic transfers. Also, fix a typo in the docs while we are here.
 -----BEGIN PGP SIGNATURE-----
 
 iQJDBAABCgAtFiEEOZGx6rniZ1Gk92RdFA3kzBSgKbYFAmWZUukPHHdzYUBrZXJu
 ZWwub3JnAAoJEBQN5MwUoCm2XUMP/Rm/6oiH7ASUOKpmLi42a68llEJuBCkK8oPW
 PmO/QmuTc6K1rDE6ehmBgTNeBQDkI7NdrUViu7xel1G0p57q5rZCdxl/BV7qmGjv
 aq46Y3omw06UybqceVlmx8NJe9r7+HXh+qJJ0UXg/+uA9VKd0jaiGo40wQjR6AxA
 Ow92+p6rUcFDGpEdXFRQJnov8p7GnCGRKumA593goju+sJRUVozjz0nifTVqdyA5
 +L3V02j5INx285sAngTPSHSn2vd0arxwumXKYusehfUtytzkI0RmBWebfqxbg5QE
 7WRnqtHe5aR78gr1RWWo/pI91yTtlfslGhj7uFQxcPpkKkyD57Z17N8rxS+u3rwH
 xAwvYG7CiWygee+q2RTDFmz49FNxRCeB3O5cjPp1Imco6MVG5ZOwZjIjn3CkDyvi
 CGQD8vXdiDfRBDSCI25XdORNsTBzrhSBAs412xGo3waflvgowtw076FYpXfNnAmZ
 z79lIlrR+Hg7ynZBs3qcjVOXvaj8rzXiLkfFWrBihGfbzVOTJv9cfetEpYcOcSaw
 Ae/wC3TKhvowdaFr43wYJrIsni93xdsCjHeIwQYozKbD6iiKWymwxzhWRDTM0cjP
 eSifFBoa1mzVqUNzSVzCHFbdKV0nlhZqxpZGrsTKhUm2EU0934sb9hBvn8o1weaR
 WRl0sHoU
 =LZdW
 -----END PGP SIGNATURE-----

Merge tag 'i2c-for-6.7-final' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

Pull i2c fixes from Wolfram Sang:
 "Improve the detection when to run atomic transfer handlers for kernels
  with preemption disabled. This removes some false positive splats a
  number of users were seeing if their driver didn't have support for
  atomic transfers.

  Also, fix a typo in the docs while we are here"

* tag 'i2c-for-6.7-final' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: core: Fix atomic xfer check for non-preempt config
  Documentation/i2c: fix spelling error in i2c-address-translators
2024-01-06 11:35:37 -08:00
Krzysztof Wilczyński
7aa5f8fcd6
PCI: xilinx-xdma: Fix uninitialized symbols in xilinx_pl_dma_pcie_setup_irq()
The error paths that follow calls to the devm_request_irq() functions
within the xilinx_pl_dma_pcie_setup_irq() reference an uninitialized
symbol each that also so happens to be incorrect.

Thus, fix this omission and reference the correct variable when invoking
a given dev_err() function following an error.

This problem was found using smatch via the 0-DAY CI Kernel Test service:

  drivers/pci/controller/pcie-xilinx-dma-pl.c:638 xilinx_pl_dma_pcie_setup_irq() error: uninitialized symbol 'irq'.
  drivers/pci/controller/pcie-xilinx-dma-pl.c:645 xilinx_pl_dma_pcie_setup_irq() error: uninitialized symbol 'irq'.

Fixes: 8d786149d7 ("PCI: xilinx-xdma: Add Xilinx XDMA Root Port driver")
Link: https://lore.kernel.org/oe-kbuild/202312120248.5DblxkBp-lkp@intel.com/
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202312120248.5DblxkBp-lkp@intel.com/
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
2024-01-06 13:37:09 +00:00
Benjamin Bara
a3368e1186 i2c: core: Fix atomic xfer check for non-preempt config
Since commit aa49c90894 ("i2c: core: Run atomic i2c xfer when
!preemptible"), the whole reboot/power off sequence on non-preempt kernels
is using atomic i2c xfer, as !preemptible() always results to 1.

During device_shutdown(), the i2c might be used a lot and not all busses
have implemented an atomic xfer handler. This results in a lot of
avoidable noise, like:

[   12.687169] No atomic I2C transfer handler for 'i2c-0'
[   12.692313] WARNING: CPU: 6 PID: 275 at drivers/i2c/i2c-core.h:40 i2c_smbus_xfer+0x100/0x118
...

Fix this by allowing non-atomic xfer when the interrupts are enabled, as
it was before.

Link: https://lore.kernel.org/r/20231222230106.73f030a5@yea
Link: https://lore.kernel.org/r/20240102150350.3180741-1-mwalle@kernel.org
Link: https://lore.kernel.org/linux-i2c/13271b9b-4132-46ef-abf8-2c311967bb46@mailbox.org/
Fixes: aa49c90894 ("i2c: core: Run atomic i2c xfer when !preemptible")
Cc: stable@vger.kernel.org # v5.2+
Signed-off-by: Benjamin Bara <benjamin.bara@skidata.com>
Tested-by: Michael Walle <mwalle@kernel.org>
Tested-by: Tor Vic <torvic9@mailbox.org>
[wsa: removed a comment which needs more work, code is ok]
Signed-off-by: Wolfram Sang <wsa@kernel.org>
2024-01-06 14:10:10 +01:00
Yoshihiro Shimoda
7682f19c3c
PCI: rcar-gen4: Fix -Wvoid-pointer-to-enum-cast error
When building with clang 18 with the -Werror compiler option enabled,
the following error will be reported:

  drivers/pci/controller/dwc/pcie-rcar-gen4.c:439:15: error: cast to smaller integer type 'enum dw_pcie_device_mode' from 'const void *' [-Werror,-Wvoid-pointer-to-enum-cast]
    439 |         rcar->mode = (enum dw_pcie_device_mode)of_device_get_match_data(&rcar->pdev->dev);

To fix this issue, cast the data the of_device_get_match_data() helper
returns to uintptr_t rather than the dw_pcie_device_mode enum.

[kwilczynski: commit log]
Link: https://lore.kernel.org/linux-pci/20231220053829.1921187-7-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2024-01-06 08:06:50 +00:00
Justin Stitt
f728967216
PCI: iproc: Fix -Wvoid-pointer-to-enum-cast warning
When building with clang 18, the following warning will be reported:

  drivers/pci/controller/pcie-iproc-platform.c:54:15: warning: cast to smaller integer type 'enum iproc_pcie_type' from 'const void *' [-Wvoid-pointer-to-enum-cast]
     55 |         pcie->type = (enum iproc_pcie_type) of_device_get_match_data(dev);

To fix this issue, cast the data the of_device_get_match_data() helper
returns to uintptr_t rather than the iproc_pcie_type enum.

[kwilczynski: commit log]
Link: https://lore.kernel.org/linux-pci/20231220053829.1921187-6-yoshihiro.shimoda.uh@renesas.com
Link: https://github.com/ClangBuiltLinux/linux/issues/1910
Reported-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Justin Stitt <justinstitt@google.com>
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2024-01-06 08:06:50 +00:00
Yoshihiro Shimoda
70fa02ca14
PCI: dwc: Add dw_pcie_ep_{read,write}_dbi[2] helpers
The current code calculated some dbi[2] registers' offset by calling
dw_pcie_ep_get_dbi[2]_offset() in each function. To improve the code
readability, add dw_pcie_ep_{read,write}_dbi[2} and some data-width
related helpers.

Link: https://lore.kernel.org/linux-pci/20231220053829.1921187-5-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2024-01-06 07:51:09 +00:00
Yoshihiro Shimoda
641f79beee
PCI: dwc: Rename .func_conf_select to .get_dbi_offset in struct dw_pcie_ep_ops
Since the struct member .func_conf_select makes the intentions behind it
difficult to ascertain from its name alone, rename it to .get_dbi_offset
to make the intended usage more obvious.

[kwilczynski: commmit log]
Suggested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/linux-pci/20231220053829.1921187-4-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
2024-01-06 07:51:08 +00:00
Yoshihiro Shimoda
756dcb5a82
PCI: dwc: Rename .ep_init to .init in struct dw_pcie_ep_ops
Since the name of the dw_pcie_ep_ops struct makes it obvious that it's
for the PCIe Endpoint, rename the struct member .ep_init to .init.

[kwilczynski: commit log]
Suggested-by: Serge Semin <fancer.lancer@gmail.com>
Suggested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/linux-pci/20231220053829.1921187-3-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Srikanth Thokala <srikanth.thokala@intel.com>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
2024-01-06 07:51:08 +00:00
Yoshihiro Shimoda
aea370b2ae
PCI: dwc: Drop host prefix from struct dw_pcie_host_ops members
Since the name of the dw_pcie_host_ops struct makes it obvious that it's
for the PCIe Host, drop the host prefix from the struct members.

[kwilczynski: commit log]
Suggested-by: Serge Semin <fancer.lancer@gmail.com>
Link: https://lore.kernel.org/linux-pci/20231220053829.1921187-2-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Lei Chuanhua <lchuanhua@maxlinear.com>
Acked-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
2024-01-06 07:51:08 +00:00
Niklas Cassel
516f366434
misc: pci_endpoint_test: Use a unique test pattern for each BAR
Use a unique test pattern for each BAR in. This makes it easier to
detect/debug address translation issues, since a developer can dump
the backing memory on the EP side, using e.g. devmem, to verify that
the address translation for each BAR is actually correct.

Link: https://lore.kernel.org/linux-pci/20231215105952.1531683-1-nks@flawful.org
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2024-01-06 05:00:08 +00:00
Peter Robinson
177c9ac6ab
PCI: j721e: Make TI J721E depend on ARCH_K3
The J721E PCIe is hardware specific to TI SoC parts so add a dependency
on that so it's available for those SoC parts and for compile testing but
not necessarily everyone who enables the Cadence PCIe controller.

Link: https://lore.kernel.org/linux-pci/20240104213910.1426843-1-pbrobinson@gmail.com
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
2024-01-06 04:51:51 +00:00
Matt Ranostay
e49ad66781
PCI: j721e: Add TI J784S4 PCIe configuration
Add PCIe configuration for J784S4 SoC platform which has 4x lane
support.

Link: https://lore.kernel.org/linux-pci/20231128054402.2155183-6-s-vadapalli@ti.com
Tested-by: Achal Verma <a-verma1@ti.com>
Signed-off-by: Matt Ranostay <mranostay@ti.com>
Signed-off-by: Achal Verma <a-verma1@ti.com>
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
2024-01-06 04:50:49 +00:00
Kent Overstreet
169de41985 bcachefs: eytzinger0_find() search should be const
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-05 23:24:46 -05:00
Kent Overstreet
f5d4481c3e bcachefs: move "ptrs not changing" optimization to bch2_trigger_extent()
This is useful for btree ptrs as well, when we're just updating
sectors_written.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-05 23:24:46 -05:00
Kent Overstreet
e7999235e6 bcachefs: fix simulateously upgrading & downgrading
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-05 23:24:21 -05:00
Kent Overstreet
72e2c920e4 bcachefs: Restart recovery passes more reliably
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-05 23:24:21 -05:00
Kent Overstreet
d04d272743 bcachefs: bch2_dump_bset() doesn't choke on u64s == 0
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-05 23:24:21 -05:00
Kent Overstreet
4819b66e29 bcachefs: improve checksum error messages
new helpers:
 - bch2_csum_to_text()
 - bch2_csum_err_msg()

standardize our checksum error messages a bit, and print out the
checksums a bit more nicely.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-05 23:24:21 -05:00
Kent Overstreet
2d02bfb01b bcachefs: improve validate_bset_keys()
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-05 23:24:21 -05:00
Kent Overstreet
5e448c4893 bcachefs: print sb magic when relevant
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-05 23:24:21 -05:00
Kent Overstreet
5b88365660 bcachefs: __bch2_sb_field_to_text()
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-05 23:24:21 -05:00
Kent Overstreet
1f5af5fc17 bcachefs: %pg is banished
not portable to userspace

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-05 23:24:21 -05:00
Kent Overstreet
c13fbb7de2 bcachefs: Improve would_deadlock trace event
We now include backtraces for every thread involved in the cycle.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-05 23:24:21 -05:00
Kent Overstreet
074cbcdaee bcachefs: fsck_err()s don't need to manually check c->sb.version anymore
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-05 23:24:21 -05:00
Kent Overstreet
15eaaa4c31 bcachefs: Upgrades now specify errors to fix, like downgrades
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-05 23:24:20 -05:00
Kent Overstreet
d641d4cae7 bcachefs: no thread_with_file in userspace
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-05 23:24:20 -05:00
Kent Overstreet
a64a37338d bcachefs: Don't autofix errors we can't fix
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-05 23:24:20 -05:00
Kent Overstreet
e9bc59f9df bcachefs: add missing bch2_latency_acct() call
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-05 23:24:20 -05:00
Kent Overstreet
4798bd2443 bcachefs: increase max_active on io_complete_wq
this definitely should _not_ be 1, and we don't actually want any
concurrency limiting at all here - btree node read completions are
getting blocked behind btree node write submissions.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-05 23:24:20 -05:00
Kent Overstreet
c72e4d7a30 bcachefs: add time_stats for btree_node_read_done()
Seeing weird latency issues in the btree node read path - add one
bch2_btree_node_read_done().

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-05 23:24:20 -05:00
Kent Overstreet
b819f30855 bcachefs: don't clear accessed bit in btree node fill
Seeing strange performance issues that might be caused by memory
pressure causing prefetched nodes to be evicted before they're used.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-05 23:24:20 -05:00