[ Upstream commit 0cc0c2e661 ]
teql_master_xmit() calls netdev_start_xmit(skb, slave) to transmit
through slave devices, but does not update skb->dev to the slave device
beforehand.
When a gretap tunnel is a TEQL slave, the transmit path reaches
iptunnel_xmit() which saves dev = skb->dev (still pointing to teql0
master) and later calls iptunnel_xmit_stats(dev, pkt_len). This
function does:
get_cpu_ptr(dev->tstats)
Since teql_master_setup() does not set dev->pcpu_stat_type to
NETDEV_PCPU_STAT_TSTATS, the core network stack never allocates tstats
for teql0, so dev->tstats is NULL. get_cpu_ptr(NULL) computes
NULL + __per_cpu_offset[cpu], resulting in a page fault.
BUG: unable to handle page fault for address: ffff8880e6659018
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
PGD 68bc067 P4D 68bc067 PUD 0
Oops: Oops: 0002 [#1] SMP KASAN PTI
RIP: 0010:iptunnel_xmit (./include/net/ip_tunnels.h:664 net/ipv4/ip_tunnel_core.c:89)
Call Trace:
<TASK>
ip_tunnel_xmit (net/ipv4/ip_tunnel.c:847)
__gre_xmit (net/ipv4/ip_gre.c:478)
gre_tap_xmit (net/ipv4/ip_gre.c:779)
teql_master_xmit (net/sched/sch_teql.c:319)
dev_hard_start_xmit (net/core/dev.c:3887)
sch_direct_xmit (net/sched/sch_generic.c:347)
__dev_queue_xmit (net/core/dev.c:4802)
neigh_direct_output (net/core/neighbour.c:1660)
ip_finish_output2 (net/ipv4/ip_output.c:237)
__ip_finish_output.part.0 (net/ipv4/ip_output.c:315)
ip_mc_output (net/ipv4/ip_output.c:369)
ip_send_skb (net/ipv4/ip_output.c:1508)
udp_send_skb (net/ipv4/udp.c:1195)
udp_sendmsg (net/ipv4/udp.c:1485)
inet_sendmsg (net/ipv4/af_inet.c:859)
__sys_sendto (net/socket.c:2206)
Fix this by setting skb->dev = slave before calling
netdev_start_xmit(), so that tunnel xmit functions see the correct
slave device with properly allocated tstats.
Fixes: 039f50629b ("ip_tunnel: Move stats update to iptunnel_xmit()")
Reported-by: Xiang Mei <xmei5@asu.edu>
Signed-off-by: Weiming Shi <bestswngs@gmail.com>
Link: https://patch.msgid.link/20260304044216.3517851-3-bestswngs@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a6413e6f6c ]
XDP multi-buf programs can modify the layout of the XDP buffer when the
program calls bpf_xdp_pull_data() or bpf_xdp_adjust_tail(). The
referenced commit in the fixes tag corrected the assumption in the mlx5
driver that the XDP buffer layout doesn't change during a program
execution. However, this fix introduced another issue: the dropped
fragments still need to be counted on the driver side to avoid page
fragment reference counting issues.
Such issue can be observed with the
test_xdp_native_adjst_tail_shrnk_data selftest when using a payload of
3600 and shrinking by 256 bytes (an upcoming selftest patch): the last
fragment gets released by the XDP code but doesn't get tracked by the
driver. This results in a negative pp_ref_count during page release and
the following splat:
WARNING: include/net/page_pool/helpers.h:297 at mlx5e_page_release_fragmented.isra.0+0x4a/0x50 [mlx5_core], CPU#12: ip/3137
Modules linked in: [...]
CPU: 12 UID: 0 PID: 3137 Comm: ip Not tainted 6.19.0-rc3+ #12 NONE
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
RIP: 0010:mlx5e_page_release_fragmented.isra.0+0x4a/0x50 [mlx5_core]
[...]
Call Trace:
<TASK>
mlx5e_dealloc_rx_wqe+0xcb/0x1a0 [mlx5_core]
mlx5e_free_rx_descs+0x7f/0x110 [mlx5_core]
mlx5e_close_rq+0x50/0x60 [mlx5_core]
mlx5e_close_queues+0x36/0x2c0 [mlx5_core]
mlx5e_close_channel+0x1c/0x50 [mlx5_core]
mlx5e_close_channels+0x45/0x80 [mlx5_core]
mlx5e_safe_switch_params+0x1a5/0x230 [mlx5_core]
mlx5e_change_mtu+0xf3/0x2f0 [mlx5_core]
netif_set_mtu_ext+0xf1/0x230
do_setlink.isra.0+0x219/0x1180
rtnl_newlink+0x79f/0xb60
rtnetlink_rcv_msg+0x213/0x3a0
netlink_rcv_skb+0x48/0xf0
netlink_unicast+0x24a/0x350
netlink_sendmsg+0x1ee/0x410
__sock_sendmsg+0x38/0x60
____sys_sendmsg+0x232/0x280
___sys_sendmsg+0x78/0xb0
__sys_sendmsg+0x5f/0xb0
[...]
do_syscall_64+0x57/0xc50
This patch fixes the issue by doing page frag counting on all the
original XDP buffer fragments for all relevant XDP actions (XDP_TX ,
XDP_REDIRECT and XDP_PASS). This is basically reverting to the original
counting before the commit in the fixes tag.
As frag_page is still pointing to the original tail, the nr_frags
parameter to xdp_update_skb_frags_info() needs to be calculated
in a different way to reflect the new nr_frags.
Fixes: afd5ba577c ("net/mlx5e: RX, Fix generating skb from non-linear xdp_buff for legacy RQ")
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Amery Hung <ameryhung@gmail.com>
Link: https://patch.msgid.link/20260305142634.1813208-6-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit db25c42c2e ]
XDP multi-buf programs can modify the layout of the XDP buffer when the
program calls bpf_xdp_pull_data() or bpf_xdp_adjust_tail(). The
referenced commit in the fixes tag corrected the assumption in the mlx5
driver that the XDP buffer layout doesn't change during a program
execution. However, this fix introduced another issue: the dropped
fragments still need to be counted on the driver side to avoid page
fragment reference counting issues.
The issue was discovered by the drivers/net/xdp.py selftest,
more specifically the test_xdp_native_tx_mb:
- The mlx5 driver allocates a page_pool page and initializes it with
a frag counter of 64 (pp_ref_count=64) and the internal frag counter
to 0.
- The test sends one packet with no payload.
- On RX (mlx5e_skb_from_cqe_mpwrq_nonlinear()), mlx5 configures the XDP
buffer with the packet data starting in the first fragment which is the
page mentioned above.
- The XDP program runs and calls bpf_xdp_pull_data() which moves the
header into the linear part of the XDP buffer. As the packet doesn't
contain more data, the program drops the tail fragment since it no
longer contains any payload (pp_ref_count=63).
- mlx5 device skips counting this fragment. Internal frag counter
remains 0.
- mlx5 releases all 64 fragments of the page but page pp_ref_count is
63 => negative reference counting error.
Resulting splat during the test:
WARNING: CPU: 0 PID: 188225 at ./include/net/page_pool/helpers.h:297 mlx5e_page_release_fragmented.isra.0+0xbd/0xe0 [mlx5_core]
Modules linked in: [...]
CPU: 0 UID: 0 PID: 188225 Comm: ip Not tainted 6.18.0-rc7_for_upstream_min_debug_2025_12_08_11_44 #1 NONE
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
RIP: 0010:mlx5e_page_release_fragmented.isra.0+0xbd/0xe0 [mlx5_core]
[...]
Call Trace:
<TASK>
mlx5e_free_rx_mpwqe+0x20a/0x250 [mlx5_core]
mlx5e_dealloc_rx_mpwqe+0x37/0xb0 [mlx5_core]
mlx5e_free_rx_descs+0x11a/0x170 [mlx5_core]
mlx5e_close_rq+0x78/0xa0 [mlx5_core]
mlx5e_close_queues+0x46/0x2a0 [mlx5_core]
mlx5e_close_channel+0x24/0x90 [mlx5_core]
mlx5e_close_channels+0x5d/0xf0 [mlx5_core]
mlx5e_safe_switch_params+0x2ec/0x380 [mlx5_core]
mlx5e_change_mtu+0x11d/0x490 [mlx5_core]
mlx5e_change_nic_mtu+0x19/0x30 [mlx5_core]
netif_set_mtu_ext+0xfc/0x240
do_setlink.isra.0+0x226/0x1100
rtnl_newlink+0x7a9/0xba0
rtnetlink_rcv_msg+0x220/0x3c0
netlink_rcv_skb+0x4b/0xf0
netlink_unicast+0x255/0x380
netlink_sendmsg+0x1f3/0x420
__sock_sendmsg+0x38/0x60
____sys_sendmsg+0x1e8/0x240
___sys_sendmsg+0x7c/0xb0
[...]
__sys_sendmsg+0x5f/0xb0
do_syscall_64+0x55/0xc70
The problem applies for XDP_PASS as well which is handled in a different
code path in the driver.
This patch fixes the issue by doing page frag counting on all the
original XDP buffer fragments for all relevant XDP actions (XDP_TX ,
XDP_REDIRECT and XDP_PASS). This is basically reverting to the original
counting before the commit in the fixes tag.
As frag_page is still pointing to the original tail, the nr_frags
parameter to xdp_update_skb_frags_info() needs to be calculated
in a different way to reflect the new nr_frags.
Fixes: 87bcef158a ("net/mlx5e: RX, Fix generating skb from non-linear xdp_buff for striding RQ")
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Cc: Amery Hung <ameryhung@gmail.com>
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260305142634.1813208-5-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 76324e4041 ]
The check on mlx5_esw_host_functions_enabled(esw->dev) for adding VF
peer miss rules is incorrect. These rules match traffic from peer's VFs,
so the local device's host function status is irrelevant. Remove this
check to ensure peer VF traffic is properly handled regardless of local
host configuration.
Also fix the PF peer miss rule deletion to be symmetric with the add
path, so only attempt to delete the rule if it was actually created.
Fixes: 520369ef43 ("net/mlx5: Support disabling host PFs")
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260305142634.1813208-3-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aed763abf0 ]
esw->work_queue executes esw_functions_changed_event_handler ->
esw_vfs_changed_event_handler and acquires the devlink lock.
.eswitch_mode_set (acquires devlink lock in devlink_nl_pre_doit) ->
mlx5_devlink_eswitch_mode_set -> mlx5_eswitch_disable_locked ->
mlx5_eswitch_event_handler_unregister -> flush_workqueue deadlocks
when esw_vfs_changed_event_handler executes.
Fix that by no longer flushing the work to avoid the deadlock, and using
a generation counter to keep track of work relevance. This avoids an old
handler manipulating an esw that has undergone one or more mode changes:
- the counter is incremented in mlx5_eswitch_event_handler_unregister.
- the counter is read and passed to the ephemeral mlx5_host_work struct.
- the work handler takes the devlink lock and bails out if the current
generation is different than the one it was scheduled to operate on.
- mlx5_eswitch_cleanup does the final draining before destroying the wq.
No longer flushing the workqueue has the side effect of maybe no longer
cancelling pending vport_change_handler work items, but that's ok since
those are disabled elsewhere:
- mlx5_eswitch_disable_locked disables the vport eq notifier.
- mlx5_esw_vport_disable disarms the HW EQ notification and marks
vport->enabled under state_lock to false to prevent pending vport
handler from doing anything.
- mlx5_eswitch_cleanup destroys the workqueue and makes sure all events
are disabled/finished.
Fixes: f1bc646c9a ("net/mlx5: Use devl_ API in mlx5_esw_offloads_devlink_port_register")
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260305081019.1811100-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3348be7978 ]
Before the fixed commit, we check slave->new_link during commit
state, which values are only BOND_LINK_{NOCHANGE, UP, DOWN}. After
the commit, we start using slave->link_new_state, which state also could
be BOND_LINK_{FAIL, BACK}.
For example, when we set updelay/downdelay, after a failover,
the slave->link_new_state could be set to BOND_LINK_{FAIL, BACK} in
bond_miimon_inspect(). And later in bond_miimon_commit(), it will treat
it as invalid and print an error, which would cause confusion for users.
[ 106.440254] bond0: (slave veth2): link status down for interface, disabling it in 200 ms
[ 106.440265] bond0: (slave veth2): invalid new link 1 on slave
[ 106.648276] bond0: (slave veth2): link status definitely down, disabling slave
[ 107.480271] bond0: (slave veth2): link status up, enabling it in 200 ms
[ 107.480288] bond0: (slave veth2): invalid new link 3 on slave
[ 107.688302] bond0: (slave veth2): link status definitely up, 10000 Mbps full duplex
Let's handle BOND_LINK_{FAIL, BACK} as valid link states.
Fixes: 1899bb3251 ("bonding: fix state transition issue in link monitoring")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20260304-b4-bond_updelay-v1-2-f72eb2e454d0@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 45fc134bcf ]
After commit e0caeb24f5 ("net: bonding: update the slave array for broadcast mode"),
broadcast mode will also set all_slaves and usable_slaves during
bond_enslave(). But if we also set updelay, during enslave, the
slave init state will be BOND_LINK_BACK. And later
bond_update_slave_arr() will alloc usable_slaves but add nothing.
This will cause bond_miimon_inspect() to have ignore_updelay
always true. So the updelay will be always ignored. e.g.
[ 6.498368] bond0: (slave veth2): link status definitely down, disabling slave
[ 7.536371] bond0: (slave veth2): link status up, enabling it in 0 ms
[ 7.536402] bond0: (slave veth2): link status definitely up, 10000 Mbps full duplex
To fix it, we can either always call bond_update_slave_arr() on every
place when link changes. Or, let's just not set usable_slaves for
broadcast mode.
Fixes: e0caeb24f5 ("net: bonding: update the slave array for broadcast mode")
Reported-by: Liang Li <liali@redhat.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20260304-b4-bond_updelay-v1-1-f72eb2e454d0@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9d4837a261 ]
add missing od setting PP_OD_FEATURE_ZERO_FAN_BIT for smu v14.0.2/14.0.3
Fixes: 9710b84e2a ("drm/amd/pm: add overdrive support on smu v14.0.2/3")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/5018
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 1b5cf07d80)
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cb47c882c3 ]
add missing od setting PP_OD_FEATURE_ZERO_FAN_BIT for smu v13.0.0/13.0.7
Fixes: cfffd980bf ("drm/amd/pm: add zero RPM OD setting support for SMU13")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/5018
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 576a10797b)
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e4eb11b34d ]
Recently, we round up new_hdisplay once at most, for bonded dsi, we
may need twice, since they are independent links, we should round up
each half separately. This also aligns with the hdisplay we program
later in dsi_timing_setup()
Example:
full_hdisplay = 1904, dsc_bpp = 8, bpc = 8
new_full_hdisplay = DIV_ROUND_UP(1904 * 8, 8 * 3) = 635
if we use half display
new_half_hdisplay = DIV_ROUND_UP(952 * 8, 8 * 3) = 318
new_full_display = 636
Fixes: 7c9e4a554d ("drm/msm/dsi: Reduce pclk rate for compression")
Signed-off-by: Pengyu Luo <mitltlatltl@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/709716/
Link: https://lore.kernel.org/r/20260306163255.215456-1-mitltlatltl@gmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f76a93241d ]
rx_packets should report the number of frames successfully received:
unicast + multicast + broadcast. Subtracting ifOutDiscards (a TX
counter) is incorrect and can undercount RX packets. RX drops are
already reported via rx_dropped (e.g. etherStatsDropEvents), so
there is no need to adjust rx_packets.
This patch removes the subtraction of ifOutDiscards from rx_packets
in rtl8365mb_stats_update().
Link: https://lore.kernel.org/netdev/878777925.105015.1763423928520@mail.yahoo.com/
Fixes: 4af2950c50 ("net: dsa: realtek-smi: add rtl8365mb subdriver for RTL8365MB-VC")
Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260303-realtek_namiltd_fix2-v1-1-bfa433d3401e@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b3ce769203 ]
If a branch target points to one past the end of a function, the branch
should be treated as a branch to another function.
This can happen e.g. with a tail call to a function that is laid out
immediately after the caller.
Fixes: 751b1783da ("perf annotate: Mark jumps to outher functions with the call arrow")
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Peter Collingbourne <pcc@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <nick.desaulniers+lkml@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://linux-review.googlesource.com/id/Ide471112e82d68177e0faf08ca411d9fcf0a7bdf
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f42f9091be ]
pr_cont_worker_id() checks pool->flags against WQ_BH, which is a
workqueue-level flag (defined in workqueue.h). Pool flags use a
separate namespace with POOL_* constants (defined in workqueue.c).
The correct constant is POOL_BH. Both WQ_BH and POOL_BH are defined
as (1 << 0) so this has no behavioral impact, but it is semantically
wrong and inconsistent with every other pool-level BH check in the
file.
Fixes: 4cb1ef6460 ("workqueue: Implement BH workqueues to eventually replace tasklets")
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Song Liu <song@kernel.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b8883b61f2 ]
btrfs_set_periodic_reclaim_ready() requires space_info->lock to be held,
as enforced by lockdep_assert_held(). However, btrfs_reclaim_sweep() was
calling it after do_reclaim_sweep() returns, at which point
space_info->lock is no longer held.
Fix this by explicitly acquiring space_info->lock before clearing the
periodic reclaim ready flag in btrfs_reclaim_sweep().
Reported-by: Chris Mason <clm@meta.com>
Link: https://lore.kernel.org/linux-btrfs/20260208182556.891815-1-clm@meta.com/
Fixes: 19eff93dc7 ("btrfs: fix periodic reclaim condition")
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Sun YangKai <sunk67188@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7b6275c80a ]
In the event that rpcrdma_post_recvs() fails to create a work request
(due to memory allocation failure, say) or otherwise exits early, we
should decrement ep->re_receiving before returning. Otherwise we will
hang in rpcrdma_xprt_drain() as re_receiving will never reach zero and
the completion will never be triggered.
On a system with high memory pressure, this can appear as the following
hung task:
INFO: task kworker/u385:17:8393 blocked for more than 122 seconds.
Tainted: G S E 6.19.0 #3
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:kworker/u385:17 state:D stack:0 pid:8393 tgid:8393 ppid:2 task_flags:0x4248060 flags:0x00080000
Workqueue: xprtiod xprt_autoclose [sunrpc]
Call Trace:
<TASK>
__schedule+0x48b/0x18b0
? ib_post_send_mad+0x247/0xae0 [ib_core]
schedule+0x27/0xf0
schedule_timeout+0x104/0x110
__wait_for_common+0x98/0x180
? __pfx_schedule_timeout+0x10/0x10
wait_for_completion+0x24/0x40
rpcrdma_xprt_disconnect+0x444/0x460 [rpcrdma]
xprt_rdma_close+0x12/0x40 [rpcrdma]
xprt_autoclose+0x5f/0x120 [sunrpc]
process_one_work+0x191/0x3e0
worker_thread+0x2e3/0x420
? __pfx_worker_thread+0x10/0x10
kthread+0x10d/0x230
? __pfx_kthread+0x10/0x10
ret_from_fork+0x273/0x2b0
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
Fixes: 15788d1d10 ("xprtrdma: Do not refresh Receive Queue while it is draining")
Signed-off-by: Eric Badger <ebadger@purestorage.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ac47870fd7 ]
Recently, the hdisplay calculation is working for 3:1 compressed ratio
only. If we have a video panel with DSC BPP = 8, and BPC = 10, we still
use the default bits_per_pclk = 24, then we get the wrong hdisplay. We
can draw the conclusion by cross-comparing the calculation with the
calculation in dsi_adjust_pclk_for_compression().
Since CMD mode does not use this, we can remove
!(msm_host->mode_flags & MIPI_DSI_MODE_VIDEO) safely.
Fixes: efcbd6f9cd ("drm/msm/dsi: Enable widebus for DSI")
Signed-off-by: Pengyu Luo <mitltlatltl@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/704822/
Link: https://lore.kernel.org/r/20260214105145.105308-1-mitltlatltl@gmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 410666a298 ]
If we found an alias through nfs3_do_create/nfs_add_or_obtain
/d_splice_alias which happens to be a dir dentry, we don't return
any error, and simply forget about this alias, but the original
dentry we were adding and passed as parameter remains negative.
This later causes an oops on nfs_atomic_open_v23/finish_open since we
supply a negative dentry to do_dentry_open.
This has been observed running lustre-racer, where dirs and files are
created/removed concurrently with the same name and O_EXCL is not
used to open files (frequent file redirection).
While d_splice_alias typically returns a directory alias or NULL, we
explicitly check d_is_dir() to ensure that we don't attempt to perform
file operations (like finish_open) on a directory inode, which triggers
the observed oops.
Fixes: 7c6c5249f0 ("NFS: add atomic_open for NFSv3 to handle O_TRUNC correctly.")
Reviewed-by: Olga Kornievskaia <okorniev@redhat.com>
Reviewed-by: Scott Mayhew <smayhew@redhat.com>
Signed-off-by: Roberto Bergantinos Corpas <rbergant@redhat.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c15e7c62fe ]
If ksmbd_override_fsids() fails, we jump to err_out2. At that point, fp is
NULL because it hasn't been assigned dh_info.fp yet, so ksmbd_fd_put(work,
fp) will not be called. However, dh_info.fp was already inserted into the
session file table by ksmbd_reopen_durable_fd(), so it will leak in the
session file table until the session is closed.
Move fp = dh_info.fp; ahead of the ksmbd_override_fsids() check to fix the
problem.
Found by an experimental AI code review agent at Google.
Fixes: c8efcc7861 ("ksmbd: add support for durable handles v1/v2")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 691417ffe7 ]
When kmeter.c was refactored into km83xx.c in 2011, the "keymile" vendor
prefix was changed to upper-case "Keymile". The devicetree at
arch/powerpc/boot/dts/kmeter1.dts never underwent the same change,
suggesting that this was simply a mistake.
Fixes: 93e2b95c81 ("powerpc/83xx: rename and update kmeter1")
Signed-off-by: J. Neuschäfer <j.ne@posteo.net>
Reviewed-by: Heiko Schocher <hs@nabladev.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260303-keymile-v1-1-463a11e71702@posteo.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 35c3f72a2d ]
Prior to commit d935187cfb ("remoteproc: mediatek: Break lock
dependency to prepare_lock"), `scp->clk` was prepared and enabled only
when it needs to communicate with the SCP. The commit d935187cfb
moved the prepare operation to remoteproc's prepare(), keeping the clock
prepared as long as the SCP is running.
The power consumption due to the prolonged clock preparation can be
negligible when the system is running, as SCP is designed to be a very
power efficient processor.
However, the clock remains prepared even when the system enters system
suspend. This prevents the underlying clock controller (and potentially
the parent PLLs) from shutting down, which increases power consumption
and may block the system from entering deep sleep states.
Add suspend and resume callbacks. Unprepare the clock in suspend() if
it was active and re-prepare it in resume() to ensure the clock is
properly disabled during system suspend, while maintaining the "always
prepared" semantics while the system is active. The driver doesn't
implement .attach() callback, hence it only checks for RPROC_RUNNING.
Fixes: d935187cfb ("remoteproc: mediatek: Break lock dependency to prepare_lock")
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20260206033034.3031781-1-tzungbi@kernel.org
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit da994db94e ]
The QMI message encoder has up until recently read a single byte (as
elem_size == 1), but with the introduction of big endian support it's
become apparent that this field is expected to be a full u32 -
regardless of the size of the length in the encoded message (which is
what elem_size specifies).
The result is that the encoder now reads past the length byte and
rejects the unreasonably large length formed when including the
following 3 bytes from the subsys_name array.
Fix this by changing to the expected type.
Fixes: 1fb82ee806 ("remoteproc: qcom: Introduce sysmon")
Signed-off-by: Bjorn Andersson <bjorn.andersson@oss.qualcomm.com>
Reviewed-by: Chris Lew <christopher.lew@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260220-qmi-encode-invalid-length-v2-1-5674be35ab29@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 04e707cb77 ]
With crash hotplug support enabled, additional memory is allocated to
the elfcorehdr kexec segment to accommodate resources added during
memory hotplug events. However, the kdump FDT is not updated with the
same size, which can result in elfcorehdr corruption in the kdump
kernel.
Update elf_headers_sz (the kimage member representing the size of the
elfcorehdr kexec segment) to reflect the total memory allocated for the
elfcorehdr segment instead of the elfcorehdr buffer size at the time of
kdump load. This allows of_kexec_alloc_and_setup_fdt() to reserve the
full elfcorehdr memory in the kdump FDT and prevents elfcorehdr
corruption.
Fixes: 849599b702 ("powerpc/crash: add crash memory hotplug support")
Reviewed-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260227171801.2238847-1-sourabhjain@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 38c64dfe0a ]
Certain versions of kexec don't even work without kernel-end being
added to the device-tree. Add it even if crash-kernel is disabled.
Signed-off-by: Ben Collins <bcollins@kernel.org>
Reviewed-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/2025042122-inescapable-mandrill-8a5ff2@boujee-and-buff
Stable-dep-of: 20197b967a ("powerpc/kexec/core: use big-endian types for crash variables")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0ee95a1d45 ]
Test robot reports the following error with clang-16.0.6:
In file included from kernel/rseq.c:75:
include/linux/rseq_entry.h:141:3: error: invalid operand for instruction
unsafe_get_user(offset, &ucs->post_commit_offset, efault);
^
include/linux/uaccess.h:608:2: note: expanded from macro 'unsafe_get_user'
arch_unsafe_get_user(x, ptr, local_label); \
^
arch/powerpc/include/asm/uaccess.h:518:2: note: expanded from macro 'arch_unsafe_get_user'
__get_user_size_goto(__gu_val, __gu_addr, sizeof(*(p)), e); \
^
arch/powerpc/include/asm/uaccess.h:284:2: note: expanded from macro '__get_user_size_goto'
__get_user_size_allowed(x, ptr, size, __gus_retval); \
^
arch/powerpc/include/asm/uaccess.h:275:10: note: expanded from macro '__get_user_size_allowed'
case 8: __get_user_asm2(x, (u64 __user *)ptr, retval); break; \
^
arch/powerpc/include/asm/uaccess.h:258:4: note: expanded from macro '__get_user_asm2'
" li %1+1,0\n" \
^
<inline asm>:7:5: note: instantiated into assembly here
li 31+1,0
^
1 error generated.
On PPC32, for 64 bits vars a pair of registers is used. Usually the
lower register in the pair is the high part and the higher register is
the low part. GCC uses r3/r4 ... r11/r12 ... r14/r15 ... r30/r31
In older kernel code inline assembly was using %1 and %1+1 to represent
64 bits values. However here it looks like clang uses r31 as high part,
allthough r32 doesn't exist hence the error.
Allthoug %1+1 should work, most places now use %L1 instead of %1+1, so
let's do the same here.
With that change, the build doesn't fail anymore and a disassembly shows
clang uses r17/r18 and r31/r14 pair when GCC would have used r16/r17 and
r30/r31:
Disassembly of section .fixup:
00000000 <.fixup>:
0: 38 a0 ff f2 li r5,-14
4: 3a 20 00 00 li r17,0
8: 3a 40 00 00 li r18,0
c: 48 00 00 00 b c <.fixup+0xc>
c: R_PPC_REL24 .text+0xbc
10: 38 a0 ff f2 li r5,-14
14: 3b e0 00 00 li r31,0
18: 39 c0 00 00 li r14,0
1c: 48 00 00 00 b 1c <.fixup+0x1c>
1c: R_PPC_REL24 .text+0x144
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202602021825.otcItxGi-lkp@intel.com/
Fixes: c20beffeec ("powerpc/uaccess: Use flexible addressing with __put_user()/__get_user()")
Signed-off-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
Acked-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/8ca3a657a650e497a96bfe7acde2f637dadab344.1770103646.git.chleroy@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7cb2a5422f ]
When the packet sizes are taken from the capture stream in the
implicit feedback mode, the sizes might be larger than the upper
boundary defined by the descriptor. As already done for other
transfer modes, we have to cap the sizes accordingly at sending,
otherwise this would lead to an error in USB core at submission of
URBs.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=221076
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260225085233.316306-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a5fe1a5451 ]
This will set AMDGPU_VCN_SMU_DPM_INTERFACE_* smu_type
based on soc type and fixing ring timeout issue seen
for DPM enabled case.
Signed-off-by: sguttula <suresh.guttula@amd.com>
Reviewed-by: Pratik Vishwakarma <Pratik.Vishwakarma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit f0f23c315b)
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c5bf24c8ab ]
Although DIYINHK USB Audio 2.0 (ID 20b1:2009) shows the implicit
feedback source for the capture stream, this would cause several
problems for the playback. Namely, the device can get wMaxPackSize
1024 for 24/32 bit format with 6 channels, and when a high sample rate
like 352.8kHz or 384kHz is played, the packet size overflows the max
limit. Also, the device has another two playback altsets, and those
aren't properly handled with the implicit feedback.
Since the device has been working well even before introducing the
implicit feedback, we can assume that it works fine in the async mode.
This patch adds the explicit skip of the implicit fb detection to make
the playback running in the async mode.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=221076
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260225085233.316306-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2f38fd99c0 ]
According to JESD223F, the maximum number of queues (MAXQ) is 32. When MCQ
is enabled and ESI is disabled, nr_hw_queues=32 causes a shift overflow
problem.
Fix this by using 64-bit intermediate values to handle the nr_hw_queues=32
case safely.
Signed-off-by: wangshuaiwei <wangshuaiwei1@xiaomi.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20260224063228.50112-1-wangshuaiwei1@xiaomi.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6510e1324b ]
For some exotic peripherals the type detect can return a reserved value
of 0x4. This will currently return an error and not report anything to
user-space, update this to report the insert normally.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260223093616.3800350-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 32fc4168fa ]
The ASUS ExpertBook BM1503CDA (Ryzen 5 7535U, Barcelo-R) has an
internal DMIC connected through the AMD ACP (Audio CoProcessor)
but is missing from the DMI quirk table, so the acp6x machine
driver probe returns -ENODEV and no DMIC capture device is created.
Add the DMI entry so the internal microphone works out of the box.
Signed-off-by: Azamat Almazbek uulu <almazbek1608@gmail.com>
Reviewed-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://patch.msgid.link/20260221114813.5610-1-almazbek1608@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 70ca8caa96 ]
On a multipath SAS system some devices don't end up with correct symlinks
from the SCSI device to its enclosure. Some devices even have enclosure
links pointing to enclosures attached to different SCSI hosts.
ses_match_to_enclosure() calls enclosure_for_each_device() which iterates
over all enclosures on the system, not just enclosures attached to the
current SCSI host.
Replace the iteration with a direct call to ses_enclosure_find_by_addr().
Reviewed-by: David Jeffery <djeffery@redhat.com>
Signed-off-by: Tomas Henzl <thenzl@redhat.com>
Link: https://patch.msgid.link/20260210191850.36784-1-thenzl@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5ede902062 ]
The screen backlight turns off during boot (specifically during udev device
initialization) when returning true for _OSI("Windows 2009").
Analyzing the device's DSDT reveals that the firmware takes a different
code path when Windows 7 is reported, which leads to the backlight shutoff.
Add a DMI quirk to invoke dmi_disable_osi_win7 for this model.
Signed-off-by: Sofia Schneider <sofia@schn.dev>
Link: https://patch.msgid.link/20260223025240.518509-1-sofia@schn.dev
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2259d14499 ]
Currently, mac80211 only initializes default WMM parameters
on the deflink during do_open(). For MLO cases, this
leaves the additional links without proper WMM defaults
if hostapd does not supply per-link WMM parameters, leading
to inconsistent QoS behavior across links.
Set default WMM parameters for each link during
ieee80211_vif_update_links(), because this ensures all
individual links in an MLD have valid WMM settings during
bring-up and behave consistently across different BSS.
Signed-off-by: Ramanathan Choodamani <quic_rchoodam@quicinc.com>
Signed-off-by: Aishwarya R <aishwarya.r@oss.qualcomm.com>
Link: https://patch.msgid.link/20260205094216.3093542-1-aishwarya.r@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6c4b2243cb ]
There's an unpleasant corner case in unshare(2), when we have a
CLONE_NEWNS in flags and current->fs hadn't been shared at all; in that
case copy_mnt_ns() gets passed current->fs instead of a private copy,
which causes interesting warts in proof of correctness]
> I guess if private means fs->users == 1, the condition could still be true.
Unfortunately, it's worse than just a convoluted proof of correctness.
Consider the case when we have CLONE_NEWCGROUP in addition to CLONE_NEWNS
(and current->fs->users == 1).
We pass current->fs to copy_mnt_ns(), all right. Suppose it succeeds and
flips current->fs->{pwd,root} to corresponding locations in the new namespace.
Now we proceed to copy_cgroup_ns(), which fails (e.g. with -ENOMEM).
We call put_mnt_ns() on the namespace created by copy_mnt_ns(), it's
destroyed and its mount tree is dissolved, but... current->fs->root and
current->fs->pwd are both left pointing to now detached mounts.
They are pinning those, so it's not a UAF, but it leaves the calling
process with unshare(2) failing with -ENOMEM _and_ leaving it with
pwd and root on detached isolated mounts. The last part is clearly a bug.
There is other fun related to that mess (races with pivot_root(), including
the one between pivot_root() and fork(), of all things), but this one
is easy to isolate and fix - treat CLONE_NEWNS as "allocate a new
fs_struct even if it hadn't been shared in the first place". Sure, we could
go for something like "if both CLONE_NEWNS *and* one of the things that might
end up failing after copy_mnt_ns() call in create_new_namespaces() are set,
force allocation of new fs_struct", but let's keep it simple - the cost
of copy_fs_struct() is trivial.
Another benefit is that copy_mnt_ns() with CLONE_NEWNS *always* gets
a freshly allocated fs_struct, yet to be attached to anything. That
seriously simplifies the analysis...
FWIW, that bug had been there since the introduction of unshare(2) ;-/
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Link: https://patch.msgid.link/20260207082524.GE3183987@ZenIV
Tested-by: Waiman Long <longman@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1cb3c20688 ]
On Star Labs StarFighter (Realtek ALC233/235), the internal speakers can
emit an audible pop when entering or leaving runtime suspend.
Mute the speaker output paths via snd_hda_gen_shutup_speakers() in the
Realtek shutup callback before the codec is powered down.
This is enough to avoid the pop without special EAPD handling.
Test results:
- runtime PM pop fixed
- still reaches D3 (PCI 0000:00:1f.3 power_state=D3hot)
- does not address pops on cold boot (G3 exit) or around display manager
start/shutdown
journalctl -k (boot):
- snd_hda_codec_alc269 hdaudioC0D0: ALC233: picked fixup for PCI SSID
7017:2014
- snd_hda_codec_alc269 hdaudioC0D0: autoconfig for ALC233: line_outs=1
(0x1b/0x0/0x0/0x0/0x0) type:speaker
Suggested-by: Takashi Iwai <tiwai@suse.com>
Tested-by: Sean Rhodes <sean@starlabs.systems>
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Link: https://patch.msgid.link/4d5fb71b132bb283fd41c622b8413770b2065242.1771532060.git.sean@starlabs.systems
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fa96392ebe ]
The driver encountered a crash during resource cleanup when the reply and
request queues were NULL due to freed memory. This issue occurred when the
creation of reply or request queues failed, and the driver freed the memory
first, but attempted to mem set the content of the freed memory, leading to
a system crash.
Add NULL pointer checks for reply and request queues before accessing the
reply/request memory during cleanup
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://patch.msgid.link/20260212070026.30263-1-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cb184dd191 ]
syzbot reported a uninit-value bug in [1].
Similar to the "*get" context where the kernel's internal file_kattr
structure is initialized before calling vfs_fileattr_get(), we should
use the same mechanism when using fa.
[1]
BUG: KMSAN: uninit-value in fuse_fileattr_get+0xeb4/0x1450 fs/fuse/ioctl.c:517
fuse_fileattr_get+0xeb4/0x1450 fs/fuse/ioctl.c:517
vfs_fileattr_get fs/file_attr.c:94 [inline]
__do_sys_file_getattr fs/file_attr.c:416 [inline]
Local variable fa.i created at:
__do_sys_file_getattr fs/file_attr.c:380 [inline]
__se_sys_file_getattr+0x8c/0xbd0 fs/file_attr.c:372
Reported-by: syzbot+7c31755f2cea07838b0c@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=7c31755f2cea07838b0c
Tested-by: syzbot+7c31755f2cea07838b0c@syzkaller.appspotmail.com
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Link: https://patch.msgid.link/tencent_B6C4583771D76766D71362A368696EC3B605@qq.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5b31376005 ]
Ensures that UFS Runtime PM can achieve power saving after System PM
suspend by resetting hba->urgent_bkops_lvl. Also modify the
ufshcd_bkops_exception_event_handler to avoid setting urgent_bkops_lvl when
status is 0, which helps maintain optimal power management.
On UFS devices supporting UFSHCD_CAP_AUTO_BKOPS_SUSPEND, a BKOPS exception
event can lead to a situation where UFS Runtime PM can't enter low-power
mode states even after the BKOPS exception has been resolved.
BKOPS exception with bkops status 0 occurs, the driver logs:
"ufshcd_bkops_exception_event_handler: device raised urgent BKOPS exception for bkops status 0"
When a BKOPS exception occurs, ufshcd_bkops_exception_event_handler() reads
the BKOPS status and sets hba->urgent_bkops_lvl to BKOPS_STATUS_NO_OP(0).
This allows the device to perform Runtime PM without changing the UFS power
mode. (__ufshcd_wl_suspend(hba, UFS_RUNTIME_PM))
During system PM suspend, ufshcd_disable_auto_bkops() is called, disabling
auto bkops. After UFS System PM Resume, when runtime PM attempts to suspend
again, ufshcd_urgent_bkops() is invoked. Since hba->urgent_bkops_lvl
remains at BKOPS_STATUS_NO_OP(0), ufshcd_enable_auto_bkops() is triggered.
However, in ufshcd_bkops_ctrl(), the driver compares the current BKOPS
status with hba->urgent_bkops_lvl, and only enables auto bkops if
curr_status >= hba->urgent_bkops_lvl. Since both values are 0, the
condition is met
As a result, __ufshcd_wl_suspend(hba, UFS_RUNTIME_PM) skips power mode
transitions and remains in an active state, preventing power saving even
though no urgent BKOPS condition exists.
Signed-off-by: Won Jung <wone.jung@samsung.com>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Link: https://patch.msgid.link/1891546521.01770806581968.JavaMail.epsvc@epcpadp2new
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 023cd6d90f ]
[821d6f0359] prevented machines
produced later than 2012 from saving NVS region to accelerate S3.
Despite being made after 2012, Lenovo G70-35 still needs NVS memory
saving during S3. A quirk is introduced for this platform.
Signed-off-by: Piotr Mazek <pmazek@outlook.com>
[ rjw: Subject adjustment ]
Link: https://patch.msgid.link/GV2PPF3CD5B63CC2442EE3F76F8443EAD90D499A@GV2PPF3CD5B63CC.EURP251.PROD.OUTLOOK.COM
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Link: https://lore.kernel.org/r/20260312200326.246396673@linuxfoundation.org
Tested-by: Brett A C Sheffield <bacs@librecast.net>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Barry K. Nathan <barryn@pobox.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit aac9b27f7c upstream.
Syzbot reported a WARN_ON() in ata_scsi_deferred_qc_work(), caused by
ap->ops->qc_defer() returning non-zero before issuing the deferred qc.
ata_scsi_schedule_deferred_qc() is called during each command completion.
This function will check if there is a deferred QC, and if
ap->ops->qc_defer() returns zero, meaning that it is possible to queue the
deferred qc at this time (without being deferred), then it will queue the
work which will issue the deferred qc.
Once the work get to run, which can potentially be a very long time after
the work was scheduled, there is a WARN_ON() if ap->ops->qc_defer() returns
non-zero.
While we hold the ap->lock both when assigning and clearing deferred_qc,
and the work itself holds the ap->lock, the code currently does not cancel
the work after clearing the deferred qc.
This means that the following scenario can happen:
1) One or several NCQ commands are queued.
2) A non-NCQ command is queued, gets stored in ap->deferred_qc.
3) Last NCQ command gets completed, work is queued to issue the deferred
qc.
4) Timeout or error happens, ap->deferred_qc is cleared. The queued work is
currently NOT canceled.
5) Port is reset.
6) One or several NCQ commands are queued.
7) A non-NCQ command is queued, gets stored in ap->deferred_qc.
8) Work is finally run. Yet at this time, there is still NCQ commands in
flight.
The work in 8) really belongs to the non-NCQ command in 2), not to the
non-NCQ command in 7). The reason why the work is executed when it is not
supposed to, is because it was never canceled when ap->deferred_qc was
cleared in 4). Thus, ensure that we always cancel the work after clearing
ap->deferred_qc.
Another potential fix would have been to let ata_scsi_deferred_qc_work() do
nothing if ap->ops->qc_defer() returns non-zero. However, canceling the
work when clearing ap->deferred_qc seems slightly more logical, as we hold
the ap->lock when clearing ap->deferred_qc, so we know that the work cannot
be holding the lock. (The function could be waiting for the lock, but that
is okay since it will do nothing if ap->deferred_qc is not set.)
Reported-by: syzbot+bcaf842a1e8ead8dfb89@syzkaller.appspotmail.com
Fixes: 0ea84089db ("ata: libata-scsi: avoid Non-NCQ command starvation")
Fixes: eddb98ad93 ("ata: libata-eh: correctly handle deferred qc timeouts")
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8e135b8aee upstream.
AppArmor was putting the reference to i_private data on its end after
removing the original entry from the file system. However the inode
can aand does live beyond that point and it is possible that some of
the fs call back functions will be invoked after the reference has
been put, which results in a race between freeing the data and
accessing it through the fs.
While the rawdata/loaddata is the most likely candidate to fail the
race, as it has the fewest references. If properly crafted it might be
possible to trigger a race for the other types stored in i_private.
Fix this by moving the put of i_private referenced data to the correct
place which is during inode eviction.
Fixes: c961ee5f21 ("apparmor: convert from securityfs to apparmorfs for policy ns files")
Reported-by: Qualys Security Advisory <qsa@qualys.com>
Reviewed-by: Georgia Garcia <georgia.garcia@canonical.com>
Reviewed-by: Maxime Bélair <maxime.belair@canonical.com>
Reviewed-by: Cengiz Can <cengiz.can@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a0b7091c4d upstream.
There is a race condition that leads to a use-after-free situation:
because the rawdata inodes are not refcounted, an attacker can start
open()ing one of the rawdata files, and at the same time remove the
last reference to this rawdata (by removing the corresponding profile,
for example), which frees its struct aa_loaddata; as a result, when
seq_rawdata_open() is reached, i_private is a dangling pointer and
freed memory is accessed.
The rawdata inodes weren't refcounted to avoid a circular refcount and
were supposed to be held by the profile rawdata reference. However
during profile removal there is a window where the vfs and profile
destruction race, resulting in the use after free.
Fix this by moving to a double refcount scheme. Where the profile
refcount on rawdata is used to break the circular dependency. Allowing
for freeing of the rawdata once all inode references to the rawdata
are put.
Fixes: 5d5182cae4 ("apparmor: move to per loaddata files, instead of replicating in profiles")
Reported-by: Qualys Security Advisory <qsa@qualys.com>
Reviewed-by: Georgia Garcia <georgia.garcia@canonical.com>
Reviewed-by: Maxime Bélair <maxime.belair@canonical.com>
Reviewed-by: Cengiz Can <cengiz.can@canonical.com>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 39440b1375 upstream.
Differential encoding allows loops to be created if it is abused. To
prevent this the unpack should verify that a diff-encode chain
terminates.
Unfortunately the differential encode verification had two bugs.
1. it conflated states that had gone through check and already been
marked, with states that were currently being checked and marked.
This means that loops in the current chain being verified are treated
as a chain that has already been verified.
2. the order bailout on already checked states compared current chain
check iterators j,k instead of using the outer loop iterator i.
Meaning a step backwards in states in the current chain verification
was being mistaken for moving to an already verified state.
Move to a double mark scheme where already verified states get a
different mark, than the current chain being kept. This enables us
to also drop the backwards verification check that was the cause of
the second error as any already verified state is already marked.
Fixes: 031dcc8f4e ("apparmor: dfa add support for state differential encoding")
Reported-by: Qualys Security Advisory <qsa@qualys.com>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Reviewed-by: Georgia Garcia <georgia.garcia@canonical.com>
Reviewed-by: Cengiz Can <cengiz.can@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
