Add temperature device in i2c0 and i2c2.
Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com>
Link: https://lore.kernel.org/r/20240801160136.1281291-9-peteryin.openbmc@gmail.com
[andrew: Fixed 'deivce' typo in commit message]
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Add power-chassis-control and power-chassis-power for phosphor-power.
Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com>
Link: https://lore.kernel.org/r/20240801160136.1281291-4-peteryin.openbmc@gmail.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
These are not specified in the binding and produce warnings such as
the following:
arch/arm/boot/dts/aspeed/aspeed-g6.dtsi:254.27-262.5: Warning
(avoid_unnecessary_addr_size): /ahb/ethernet@1e670000: unnecessary
#address-cells/#size-cells without "ranges", "dma-ranges" or child
"reg" property
arch/arm/boot/dts/aspeed/aspeed-g6.dtsi:264.27-272.5: Warning
(avoid_unnecessary_addr_size): /ahb/ethernet@1e690000: unnecessary
#address-cells/#size-cells without "ranges", "dma-ranges" or child
"reg" property
arch/arm/boot/dts/aspeed/aspeed-ast2600-evb-a1.dtb: ethernet@1e660000:
Unevaluated properties are not allowed ('#address-cells', '#size-cells'
were unexpected)
Link: https://lore.kernel.org/r/20240802-dt-warnings-bmc-dts-cleanups-v1-7-1cb1378e5fcd@codeconstruct.com.au
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Many platforms were specifying the `aspeed,external-nodes` property
required by the AST2500 pinctrl. However, its been specified in the
pinctrl node directly in aspeed-g5.dtsi for quite a long time now.
Remove the unnecessary override from all relevant platform dts files.
Link: https://lore.kernel.org/r/20240802-dt-warnings-bmc-dts-cleanups-v1-5-1cb1378e5fcd@codeconstruct.com.au
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
There's no binding defined for the device, so remove it from the
devicetrees until someone has the motivation to write one.
Squash warnings such as:
arch/arm/boot/dts/aspeed/aspeed-ast2500-evb.dtb:
/ahb/apb@1e6e0000/xdma@1e6e7000: failed to match any schema with
compatible: ['aspeed,ast2500-xdma']
Link: https://lore.kernel.org/r/20240802-dt-warnings-bmc-dts-cleanups-v1-4-1cb1378e5fcd@codeconstruct.com.au
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
The ASPEED CVIC binding documents `aspeed,cvic` as the required generic
compatible, but the devicetrees contained `aspeed-cvic`. Update the
devictrees to use `aspeed,cvic` as documented and as required by
the driver implementation. Presumably the bug was the result of some
incoherent thoughts while removing the SoC name at the time of
writing.
Link: https://lore.kernel.org/r/20240802-dt-warnings-bmc-dts-cleanups-v1-2-1cb1378e5fcd@codeconstruct.com.au
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Squash schema warnings such as:
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-galaxy100.dtb:
copro-interrupt-controller@1e6c2000: $nodename:0:
'copro-interrupt-controller@1e6c2000' does not match
'^interrupt-controller(@[0-9a-f,]+)*$'
Link: https://lore.kernel.org/r/20240802-dt-warnings-bmc-dts-cleanups-v1-1-1cb1378e5fcd@codeconstruct.com.au
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Add LED nodes as the gpio-leds devices. They are led-bmc-ready,
led-sw-heartbeat, led-identify, led-fault, led-fan-fault, led-psu-fault
Signed-off-by: Chanh Nguyen <chanh@os.amperecomputing.com>
Link: https://lore.kernel.org/r/20240806071806.1666550-6-chanh@os.amperecomputing.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Enable the BMC I2C10.
Enable the BMC I2C15 and add the GPIO Expander as a child node.
Signed-off-by: Chanh Nguyen <chanh@os.amperecomputing.com>
Link: https://lore.kernel.org/r/20240806071806.1666550-5-chanh@os.amperecomputing.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Define the I2C alias ports for the riser cards.
Add the i2c muxes to switch to the i2c alias ports and
the eeprom nodes to read the FRU contents on riser cards.
Signed-off-by: Chanh Nguyen <chanh@os.amperecomputing.com>
Link: https://lore.kernel.org/r/20240806071806.1666550-4-chanh@os.amperecomputing.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Add the I2C alias ports to read temperature sensors via channels
of the I2C muxes.
Signed-off-by: Chanh Nguyen <chanh@os.amperecomputing.com>
Link: https://lore.kernel.org/r/20240806071806.1666550-3-chanh@os.amperecomputing.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Define I2C alias ports from I2C Switch 0x70 at BMC I2C5.
Add the tmp421 sensors via the I2C alias ports as OCP device
temperature sensors.
Signed-off-by: Chanh Nguyen <chanh@os.amperecomputing.com>
Link: https://lore.kernel.org/r/20240806071806.1666550-2-chanh@os.amperecomputing.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Add linux device tree entry for Meta(Facebook) Catalina compute-tray
BMC using AT2600 SoC.
Signed-off-by: Potin Lai <potin.lai.pt@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240805-potin-catalina-dts-v7-2-286bfd2ab93b@gmail.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Document the new compatibles used on Meta Catalina.
Signed-off-by: Potin Lai <potin.lai.pt@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240805-potin-catalina-dts-v7-1-286bfd2ab93b@gmail.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Switch the i2c bus number to map the i2c tag according to the hardware
design.
Signed-off-by: Yang Chen <yang.chen@quantatw.com>
Link: https://lore.kernel.org/r/20240626130332.929534-15-yangchen.openbmc@gmail.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Change the RTC reference from on-chip to externel on i2c bus 9 and address
is 0x51.
Signed-off-by: Yang Chen <yang.chen@quantatw.com>
Link: https://lore.kernel.org/r/20240626130332.929534-5-yangchen.openbmc@gmail.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Revise the address of tmp75 on I2C bus 1 from 0x48 to 0x4f due to design
change.
Signed-off-by: Yang Chen <yang.chen@quantatw.com>
Link: https://lore.kernel.org/r/20240626130332.929534-2-yangchen.openbmc@gmail.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
- Changed temperature sensor monitor chip from tmp423 to tmp432
Signed-off-by: Ninad Palsule <ninad@linux.ibm.com>
Reviewed-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20240605160604.2135840-1-ninad@linux.ibm.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Add the device tree for the new BMC system. The Fuji is a P11
system with eight processors.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Ninad Palsule <ninad@linux.ibm.com>
Link: https://lore.kernel.org/r/20240522192524.3286237-17-eajames@linux.ibm.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
The 4U Blueridge is identical to the Blueridge system but has two extra
power supplies.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Ninad Palsule <ninad@linux.ibm.com>
Link: https://lore.kernel.org/r/20240522192524.3286237-16-eajames@linux.ibm.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Add the device tree for the new BMC system. The Blueridge is a
P11 system with four processors.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Ninad Palsule <ninad@linux.ibm.com>
Link: https://lore.kernel.org/r/20240522192524.3286237-15-eajames@linux.ibm.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Add the P11 FSI device tree for use in upcoming BMC systems.
Unlike P10, there is no system with only two processors, so
only the quad processor FSI layout is necessary.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Ninad Palsule <ninad@linux.ibm.com>
Link: https://lore.kernel.org/r/20240522192524.3286237-14-eajames@linux.ibm.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
