[ Upstream commit 2c118f50d7 ]
Commit:
2e4be0d011 ("x86/show_trace_log_lvl: Ensure stack pointer is aligned, again")
was intended to ensure alignment of the stack pointer; but it also moved
the initialization of the "stack" variable down into the loop header.
This was likely intended as a no-op cleanup, since the commit
message does not mention it; however, this caused a behavioral change
because the value of "regs" is different between the two places.
Originally, get_stack_pointer() used the regs provided by the caller; after
that commit, get_stack_pointer() instead uses the regs at the top of the
stack frame the unwinder is looking at. Often, there are no such regs at
all, and "regs" is NULL, causing get_stack_pointer() to fall back to the
task's current stack pointer, which is not what we want here, but probably
happens to mostly work. Other times, the original regs will point to
another regs frame - in that case, the linear guess unwind logic in
show_trace_log_lvl() will start unwinding too far up the stack, causing the
first frame found by the proper unwinder to never be visited, resulting in
a stack trace consisting purely of guess lines.
Fix it by moving the "stack = " assignment back where it belongs.
Fixes: 2e4be0d011 ("x86/show_trace_log_lvl: Ensure stack pointer is aligned, again")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250325-2025-03-unwind-fixes-v1-2-acd774364768@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2c70953b6f ]
While commit fa15d8c692 ("leds: Fix set_brightness_delayed() race")
successfully forces led_set_brightness() to be called with LED_OFF at
least once when switching from blinking to LED on state so that
hw-blinking can be disabled, another race remains. Indeed in
led_set_brightness(LED_OFF) followed by led_set_brightness(any)
scenario the following CPU scheduling can happen:
CPU0 CPU1
---- ----
set_brightness_delayed() {
test_and_clear_bit(BRIGHTNESS_OFF)
led_set_brightness(LED_OFF) {
set_bit(BRIGHTNESS_OFF)
queue_work()
}
led_set_brightness(any) {
set_bit(BRIGHTNESS)
queue_work() //already queued
}
test_and_clear_bit(BRIGHTNESS)
/* LED set with brightness any */
}
/* From previous CPU1 queue_work() */
set_brightness_delayed() {
test_and_clear_bit(BRIGHTNESS_OFF)
/* LED turned off */
test_and_clear_bit(BRIGHTNESS)
/* Clear from previous run, LED remains off */
In that case the led_set_brightness(LED_OFF)/led_set_brightness(any)
sequence will be effectively executed in reverse order and LED will
remain off.
With the introduction of commit 32360bf6a5 ("leds: Introduce ordered
workqueue for LEDs events instead of system_wq") the race is easier to
trigger as sysfs brightness configuration does not wait for
set_brightness_delayed() work to finish (flush_work() removal).
Use delayed_set_value to optionnally re-configure brightness after a
LED_OFF. That way a LED state could be configured more that once but
final state will always be as expected. Ensure that delayed_set_value
modification is seen before set_bit() using smp_mb__before_atomic().
Fixes: fa15d8c692 ("leds: Fix set_brightness_delayed() race")
Signed-off-by: Remi Pommarel <repk@triplefau.lt>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/19c81177059dab7b656c42063958011a8e4d1a66.1740050412.git.repk@triplefau.lt
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2d8cb9ffe1 ]
If offset end up being high enough, right hand expression in functions
like sm501_gpio_set() shifted left for that number of bits, may
not fit in int type.
Just in case, fix that by using BIT() both as an option safe from
overflow issues and to make this step look similar to other gpio
drivers.
Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.
Fixes: f61be273d3 ("sm501: add gpiolib support")
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Link: https://lore.kernel.org/r/20250115171206.20308-1-n.zhandarovich@fintech.ru
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5a550b0070 ]
of_parse_phandle_with_fixed_args() requires its caller to
call into of_node_put() on the node pointer from the output
structure, but such a call is currently missing.
Call into of_node_put() to rectify that.
Fixes: 92a9b82525 ("pinctrl: renesas: Add RZ/V2M pin and gpio controller driver")
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250305163753.34913-4-fabrizio.castro.jz@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5ed3b0cb3f ]
When cur_qp isn't NULL, in order to avoid fetching the QP from
the radix tree again we check if the next cqe QP is identical to
the one we already have.
The bug however is that we are checking if the QP is identical by
checking the QP number inside the CQE against the QP number inside the
mlx5_ib_qp, but that's wrong since the QP number from the CQE is from
FW so it should be matched against mlx5_core_qp which is our FW QP
number.
Otherwise we could use the wrong QP when handling a CQE which could
cause the kernel trace below.
This issue is mainly noticeable over QPs 0 & 1, since for now they are
the only QPs in our driver whereas the QP number inside mlx5_ib_qp
doesn't match the QP number inside mlx5_core_qp.
BUG: kernel NULL pointer dereference, address: 0000000000000012
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: Oops: 0000 [#1] SMP
CPU: 0 UID: 0 PID: 7927 Comm: kworker/u62:1 Not tainted 6.14.0-rc3+ #189
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
Workqueue: ib-comp-unb-wq ib_cq_poll_work [ib_core]
RIP: 0010:mlx5_ib_poll_cq+0x4c7/0xd90 [mlx5_ib]
Code: 03 00 00 8d 58 ff 21 cb 66 39 d3 74 39 48 c7 c7 3c 89 6e a0 0f b7 db e8 b7 d2 b3 e0 49 8b 86 60 03 00 00 48 c7 c7 4a 89 6e a0 <0f> b7 5c 98 02 e8 9f d2 b3 e0 41 0f b7 86 78 03 00 00 83 e8 01 21
RSP: 0018:ffff88810511bd60 EFLAGS: 00010046
RAX: 0000000000000010 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffff88885fa1b3c0 RDI: ffffffffa06e894a
RBP: 00000000000000b0 R08: 0000000000000000 R09: ffff88810511bc10
R10: 0000000000000001 R11: 0000000000000001 R12: ffff88810d593000
R13: ffff88810e579108 R14: ffff888105146000 R15: 00000000000000b0
FS: 0000000000000000(0000) GS:ffff88885fa00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000012 CR3: 00000001077e6001 CR4: 0000000000370eb0
Call Trace:
<TASK>
? __die+0x20/0x60
? page_fault_oops+0x150/0x3e0
? exc_page_fault+0x74/0x130
? asm_exc_page_fault+0x22/0x30
? mlx5_ib_poll_cq+0x4c7/0xd90 [mlx5_ib]
__ib_process_cq+0x5a/0x150 [ib_core]
ib_cq_poll_work+0x31/0x90 [ib_core]
process_one_work+0x169/0x320
worker_thread+0x288/0x3a0
? work_busy+0xb0/0xb0
kthread+0xd7/0x1f0
? kthreads_online_cpu+0x130/0x130
? kthreads_online_cpu+0x130/0x130
ret_from_fork+0x2d/0x50
? kthreads_online_cpu+0x130/0x130
ret_from_fork_asm+0x11/0x20
</TASK>
Fixes: e126ba97db ("mlx5: Add driver for Mellanox Connect-IB adapters")
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Edward Srouji <edwards@nvidia.com>
Link: https://patch.msgid.link/4ada09d41f1e36db62c44a9b25c209ea5f054316.1741875692.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6ebc5030e0 ]
may_goto uses an additional 8 bytes on the stack, which causes the
interpreters[] array to go out of bounds when calculating index by
stack_size.
1. If a BPF program is rewritten, re-evaluate the stack size. For non-JIT
cases, reject loading directly.
2. For non-JIT cases, calculating interpreters[idx] may still cause
out-of-bounds array access, and just warn about it.
3. For jit_requested cases, the execution of bpf_func also needs to be
warned. So move the definition of function __bpf_prog_ret0_warn out of
the macro definition CONFIG_BPF_JIT_ALWAYS_ON.
Reported-by: syzbot+d2a2c639d03ac200a4f1@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/bpf/0000000000000f823606139faa5d@google.com/
Fixes: 011832b97b ("bpf: Introduce may_goto instruction")
Signed-off-by: Jiayuan Chen <mrpre@163.com>
Link: https://lore.kernel.org/r/20250214091823.46042-2-mrpre@163.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8b75c29739 ]
With PWRSTS_OFF_ON, USB GDSCs are turned off during gdsc_disable(). This
can happen during scenarios such as system suspend and breaks the resume
of USB controller from suspend.
So use PWRSTS_RET_ON to indicate the GDSC driver to not turn off the GDSCs
during gdsc_disable() and allow the hardware to transition the GDSCs to
retention when the parent domain enters low power state during system
suspend.
Fixes: c58225b7e3 ("clk: qcom: add the SM8650 Global Clock Controller driver, part 1")
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250305-topic-sm8650-upstream-fix-usb-suspend-v1-1-649036ab0557@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9b00eb923f ]
The compiler correctly warns that hv_nxc may be used uninitialised
as that will occur when NX-GZIP is unavailable.
Fix it by rearranging the code and delay setting caps_feat until
the final query succeeds.
Fixes: b4ba22114c ("crypto/nx: Get NX capabilities for GZIP coprocessor type")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 30cc7b0d0e ]
The charge input threshold voltage register on the MAX77693 PMIC accepts
four values: 0x0 for 4.3v, 0x1 for 4.7v, 0x2 for 4.8v and 0x3 for 4.9v.
Due to an oversight, the driver calculated the values for 4.7v and above
starting from 0x0, rather than from 0x1 ([(4700000 - 4700000) / 100000]
gives 0).
Add 1 to the calculation to ensure that 4.7v is converted to a register
value of 0x1 and that the other two voltages are converted correctly as
well.
Fixes: 87c2d90678 ("power: max77693: Add charger driver for Maxim 77693")
Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250316-max77693-charger-input-threshold-fix-v1-1-2b037d0ac722@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 57e2428f8d ]
PUSH_REGS with save_ret=1 is used by interrupt entry helper functions that
initially start with a UNWIND_HINT_FUNC ORC state.
However, save_ret=1 means that we clobber the helper function's return
address (and then later restore the return address further down on the
stack); after that point, the only thing on the stack we can unwind through
is the IRET frame, so use UNWIND_HINT_IRET_REGS until we have a full
pt_regs frame.
( An alternate approach would be to move the pt_regs->di overwrite down
such that it is the final step of pt_regs setup; but I don't want to
rearrange entry code just to make unwinding a tiny bit more elegant. )
Fixes: 9e809d15d6 ("x86/entry: Reduce the code footprint of the 'idtentry' macro")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20250325-2025-03-unwind-fixes-v1-1-acd774364768@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0079e77c08 ]
The bit index of the peripheral clock for mmc A is wrong
This was probably not a problem for mmc A as the peripheral is likely left
enabled by the bootloader.
No issues has been reported so far but it could be a problem, most likely
some form of conflict between the ethernet and mmc A clock, breaking
ethernet on init.
Use the value provided by the documentation for mmc A before this
becomes an actual problem.
Fixes: 085a4ea93d ("clk: meson: g12a: add peripheral clock controller")
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20241213-amlogic-clk-g12a-mmca-fix-v1-1-5af421f58b64@baylibre.com
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 91be7d2709 ]
The DSP and OCRAM_A modules from AUDIOMIX are clocked by
AUDIO_AXI_CLK_ROOT, not AUDIO_AHB_CLK_ROOT. Update the clock data
accordingly.
Fixes: 6cd95f7b15 ("clk: imx: imx8mp: Add audiomix block control")
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20250226164513.33822-3-laurentiumihalcea111@gmail.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 92c6a707d8 ]
The firmware already handles parity errors reported by the accelerators
by clearing them through the corresponding SSMSOFTERRORPARITY register.
To ensure consistent behavior and prevent race conditions between the
driver and firmware, remove the logic that checks the SSMSOFTERRORPARITY
registers.
Additionally, change the return type of the function
adf_handle_rf_parr_err() to void, as it consistently returns false.
Parity errors are recoverable and do not necessitate a device reset.
Fixes: 895f7d532c ("crypto: qat - add handling of errors from ERRSOU2 for QAT GEN4")
Signed-off-by: Bairavi Alagappan <bairavix.alagappan@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 113ec87b0f ]
Sparse is not happy about implementation of the NPCM8XX_PINCFG()
pinctrl-npcm8xx.c:1314:9: warning: obsolete array initializer, use C99 syntax
pinctrl-npcm8xx.c:1315:9: warning: obsolete array initializer, use C99 syntax
...
pinctrl-npcm8xx.c:1412:9: warning: obsolete array initializer, use C99 syntax
pinctrl-npcm8xx.c:1413:9: warning: too many warnings
which uses index-based assignment in a wrong way, i.e. it missed
the equal sign and hence the index is simply ignored, while the
entries are indexed naturally. This is not a problem as the pin
numbering repeats the natural order, but it might be in case of
shuffling the entries. Fix this by adding missed equal sign and
reformat a bit for better readability.
Fixes: acf4884a57 ("pinctrl: nuvoton: add NPCM8XX pinctrl and GPIO driver")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/20250318105932.2090926-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 901b3290bd ]
Without this change, the rest of this series will emit the following
error message:
error[E0308]: `if` and `else` have incompatible types
--> <linux>/rust/kernel/print.rs:22:22
|
21 | #[export]
| --------- expected because of this
22 | unsafe extern "C" fn rust_fmt_argument(
| ^^^^^^^^^^^^^^^^^ expected `u8`, found `i8`
|
= note: expected fn item `unsafe extern "C" fn(*mut u8, *mut u8, *mut c_void) -> *mut u8 {bindings::rust_fmt_argument}`
found fn item `unsafe extern "C" fn(*mut i8, *mut i8, *const c_void) -> *mut i8 {print::rust_fmt_argument}`
The error may be different depending on the architecture.
To fix this, change the void pointer argument to use a const pointer,
and change the imports to use crate::ffi instead of core::ffi for
integer types.
Fixes: 787983da77 ("vsprintf: add new `%pA` format specifier")
Reviewed-by: Tamir Duberstein <tamird@gmail.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Acked-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20250303-export-macro-v3-1-41fbad85a27f@google.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4107a1aeb2 ]
On powerpc, a CPU does not necessarily originate from NUMA node 0.
This contrasts with architectures like x86, where CPU 0 is not
hot-pluggable, making NUMA node 0 a consistently valid node.
This discrepancy can lead to failures when creating a map on NUMA
node 0, which is initialized by default, if no CPUs are allocated
from NUMA node 0.
This patch fixes the issue by setting NUMA_NO_NODE (-1) for map
creation for this selftest.
Fixes: 96eabe7a40 ("bpf: Allow selecting numa node during map creation")
Signed-off-by: Saket Kumar Bhaskar <skb99@linux.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/bpf/cf1f61468b47425ecf3728689bc9636ddd1d910e.1738302337.git.skb99@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7915d7d540 ]
The 32k clock reference a parent 'cts_slow_oscin' with a fixme note saying
that this clock should be provided by AO controller.
The HW probably has this clock but it does not exist at the moment in
any controller implementation. Furthermore, referencing clock by the global
name should be avoided whenever possible.
There is no reason to keep this hack around, at least for now.
Fixes: 14c735c8e3 ("clk: meson-gxbb: Add EE 32K Clock for CEC")
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20241220-amlogic-clk-gxbb-32k-fixes-v1-2-baca56ecf2db@baylibre.com
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8995f8f108 ]
Several clocks used by both g12a and g12b use the g12a cpu A clock hw
pointer as clock parent. This is incorrect on g12b since the parents of
cluster A cpu clock are different. Also the hw clock provided as parent to
these children is not even registered clock on g12b.
Fix the problem by reverting to the global namespace and let CCF pick
the appropriate, as it is already done for other clocks, such as
cpu_clk_trace_div.
Fixes: 25e682a02d ("clk: meson: g12a: migrate to the new parent description method")
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20241213-amlogic-clk-g12a-cpua-parent-fix-v1-1-d8c0f41865fe@baylibre.com
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 17013f0acb ]
Tegra devices have an 'sfsel' bit field that determines whether a pin
operates in SFIO (Special Function I/O) or GPIO mode. Currently,
tegra_pinctrl_gpio_disable_free() sets this bit when releasing a GPIO.
However, tegra_pinctrl_set_mux() can be called independently in certain
code paths where gpio_disable_free() is not invoked. In such cases, failing
to set the SFIO mode could lead to incorrect pin configurations, resulting
in functional issues for peripherals relying on SFIO.
This patch ensures that whenever set_mux() is called, the SFIO mode is
correctly set in the Mux Register if the 'sfsel' bit is present. This
prevents situations where the pin remains in GPIO mode despite being
configured for SFIO use.
Fixes: 971dac7123 ("pinctrl: add a driver for NVIDIA Tegra")
Signed-off-by: Prathamesh Shete <pshete@nvidia.com>
Link: https://lore.kernel.org/20250306050542.16335-1-pshete@nvidia.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 37826f0a8c ]
The ib_post_receive_mads() function handles posting receive work
requests (WRs) to MAD QPs and is called in two cases:
1) When a MAD port is opened.
2) When a receive WQE is consumed upon receiving a new MAD.
Whereas, if MADs arrive during the port open phase, a race condition
might cause an extra WR to be posted, exceeding the QP’s capacity.
This leads to failures such as:
infiniband mlx5_0: ib_post_recv failed: -12
infiniband mlx5_0: Couldn't post receive WRs
infiniband mlx5_0: Couldn't start port
infiniband mlx5_0: Couldn't open port 1
Fix this by checking the current receive count before posting a new WR.
If the QP’s receive queue is full, do not post additional WRs.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Link: https://patch.msgid.link/c4984ba3c3a98a5711a558bccefcad789587ecf1.1741875592.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7505436e29 ]
When the lookup is retried after instance construction, it uses
the type and mask from the larval, which may not match the values
used by the caller. For example, if the caller is requesting for
a !NEEDS_FALLBACK algorithm, it may end up getting an algorithm
that needs fallbacks.
Fix this by making the caller supply the type/mask and using that
for the lookup.
Reported-by: Coiby Xu <coxu@redhat.com>
Fixes: 96ad595520 ("crypto: api - Remove instance larval fulfilment")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 45291874a7 ]
Commit 243f8ffc88 ("power: supply: bq27xxx_battery: Notify also about
status changes") intended to notify userspace when the status changes,
based on the flags register. However, the cached state is updated too
early, before the flags are tested for any changes. Remove the premature
update.
Fixes: 243f8ffc88 ("power: supply: bq27xxx_battery: Notify also about status changes")
Signed-off-by: Sicelo A. Mhlongo <absicsz@gmail.com>
Link: https://lore.kernel.org/r/20241125152945.47937-1-absicsz@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4641840341 ]
For example MSM8974 has mx voltage rail exposed as regulator and only cx
voltage rail is exposed as power domain. This power domain (cx) is
attached internally in power domain and cannot be attached in this driver.
Fixes: 8750cf3923 ("remoteproc: qcom_q6v5_mss: Allow replacing regulators with power domains")
Co-developed-by: Matti Lehtimäki <matti.lehtimaki@gmail.com>
Signed-off-by: Matti Lehtimäki <matti.lehtimaki@gmail.com>
Reviewed-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Signed-off-by: Luca Weiss <luca@lucaweiss.eu>
Link: https://lore.kernel.org/r/20250217-msm8226-modem-v5-4-2bc74b80e0ae@lucaweiss.eu
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8343768924 ]
After the erdma_cep_put(new_cep) being called, new_cep will be freed,
and the following dereference will cause a UAF problem. Fix this issue.
Fixes: 920d93eac8 ("RDMA/erdma: Add connection management (CM) support")
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Cheng Xu <chengyou@linux.alibaba.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7919514764 ]
When invalidating an address range in mlx5, there is an optimization to
do UMR operations in chunks.
Previously, the invalidation counter was incorrectly updated for the
same indexes within a chunk. Now, the invalidation counter is updated
only when a chunk is complete and mlx5r_umr_update_xlt() is called.
This ensures that the counter accurately represents the number of pages
invalidated using UMR.
Fixes: a3de94e3d6 ("IB/mlx5: Introduce ODP diagnostic counters")
Signed-off-by: Chiara Meiohas <cmeiohas@nvidia.com>
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Link: https://patch.msgid.link/560deb2433318e5947282b070c915f3c81fef77f.1741875692.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a1ecb30f90 ]
Commit 467f432a52 ("RDMA/core: Split port and device counter sysfs
attributes") accidentally almost exposed hw counters to non-init net
namespaces. It didn't expose them fully, as an attempt to read any of
those counters leads to a crash like this one:
[42021.807566] BUG: kernel NULL pointer dereference, address: 0000000000000028
[42021.814463] #PF: supervisor read access in kernel mode
[42021.819549] #PF: error_code(0x0000) - not-present page
[42021.824636] PGD 0 P4D 0
[42021.827145] Oops: 0000 [#1] SMP PTI
[42021.830598] CPU: 82 PID: 2843922 Comm: switchto-defaul Kdump: loaded Tainted: G S W I XXX
[42021.841697] Hardware name: XXX
[42021.849619] RIP: 0010:hw_stat_device_show+0x1e/0x40 [ib_core]
[42021.855362] Code: 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 0f 1f 44 00 00 49 89 d0 4c 8b 5e 20 48 8b 8f b8 04 00 00 48 81 c7 f0 fa ff ff <48> 8b 41 28 48 29 ce 48 83 c6 d0 48 c1 ee 04 69 d6 ab aa aa aa 48
[42021.873931] RSP: 0018:ffff97fe90f03da0 EFLAGS: 00010287
[42021.879108] RAX: ffff9406988a8c60 RBX: ffff940e1072d438 RCX: 0000000000000000
[42021.886169] RDX: ffff94085f1aa000 RSI: ffff93c6cbbdbcb0 RDI: ffff940c7517aef0
[42021.893230] RBP: ffff97fe90f03e70 R08: ffff94085f1aa000 R09: 0000000000000000
[42021.900294] R10: ffff94085f1aa000 R11: ffffffffc0775680 R12: ffffffff87ca2530
[42021.907355] R13: ffff940651602840 R14: ffff93c6cbbdbcb0 R15: ffff94085f1aa000
[42021.914418] FS: 00007fda1a3b9700(0000) GS:ffff94453fb80000(0000) knlGS:0000000000000000
[42021.922423] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[42021.928130] CR2: 0000000000000028 CR3: 00000042dcfb8003 CR4: 00000000003726f0
[42021.935194] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[42021.942257] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[42021.949324] Call Trace:
[42021.951756] <TASK>
[42021.953842] [<ffffffff86c58674>] ? show_regs+0x64/0x70
[42021.959030] [<ffffffff86c58468>] ? __die+0x78/0xc0
[42021.963874] [<ffffffff86c9ef75>] ? page_fault_oops+0x2b5/0x3b0
[42021.969749] [<ffffffff87674b92>] ? exc_page_fault+0x1a2/0x3c0
[42021.975549] [<ffffffff87801326>] ? asm_exc_page_fault+0x26/0x30
[42021.981517] [<ffffffffc0775680>] ? __pfx_show_hw_stats+0x10/0x10 [ib_core]
[42021.988482] [<ffffffffc077564e>] ? hw_stat_device_show+0x1e/0x40 [ib_core]
[42021.995438] [<ffffffff86ac7f8e>] dev_attr_show+0x1e/0x50
[42022.000803] [<ffffffff86a3eeb1>] sysfs_kf_seq_show+0x81/0xe0
[42022.006508] [<ffffffff86a11134>] seq_read_iter+0xf4/0x410
[42022.011954] [<ffffffff869f4b2e>] vfs_read+0x16e/0x2f0
[42022.017058] [<ffffffff869f50ee>] ksys_read+0x6e/0xe0
[42022.022073] [<ffffffff8766f1ca>] do_syscall_64+0x6a/0xa0
[42022.027441] [<ffffffff8780013b>] entry_SYSCALL_64_after_hwframe+0x78/0xe2
The problem can be reproduced using the following steps:
ip netns add foo
ip netns exec foo bash
cat /sys/class/infiniband/mlx4_0/hw_counters/*
The panic occurs because of casting the device pointer into an
ib_device pointer using container_of() in hw_stat_device_show() is
wrong and leads to a memory corruption.
However the real problem is that hw counters should never been exposed
outside of the non-init net namespace.
Fix this by saving the index of the corresponding attribute group
(it might be 1 or 2 depending on the presence of driver-specific
attributes) and zeroing the pointer to hw_counters group for compat
devices during the initialization.
With this fix applied hw_counters are not available in a non-init
net namespace:
find /sys/class/infiniband/mlx4_0/ -name hw_counters
/sys/class/infiniband/mlx4_0/ports/1/hw_counters
/sys/class/infiniband/mlx4_0/ports/2/hw_counters
/sys/class/infiniband/mlx4_0/hw_counters
ip netns add foo
ip netns exec foo bash
find /sys/class/infiniband/mlx4_0/ -name hw_counters
Fixes: 467f432a52 ("RDMA/core: Split port and device counter sysfs attributes")
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Maher Sanalla <msanalla@nvidia.com>
Cc: linux-rdma@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Link: https://patch.msgid.link/20250227165420.3430301-1-roman.gushchin@linux.dev
Reviewed-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a9e60f1ffe ]
Correct the clk_ref_usb3otg parent to fix clock control for the usb3
controller on rk3328. Verified against the rk3328 trm, the rk3228h trm,
and the rk3328 usb3 phy clock map.
Fixes: fe3511ad8a ("clk: rockchip: add clock controller for rk3328")
Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Link: https://lore.kernel.org/r/20250115012628.1035928-2-pgwipeout@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a63a631c9b ]
There are two bpf_link__destroy(freplace_link) calls in
test_tailcall_bpf2bpf_freplace(). After the first bpf_link__destroy()
is called, if the following bpf_map_{update,delete}_elem() throws an
exception, it will jump to the "out" label and call bpf_link__destroy()
again, causing double free and eventually leading to a segfault.
Fix it by directly resetting freplace_link to NULL after the first
bpf_link__destroy() call.
Fixes: 021611d33e ("selftests/bpf: Add test to verify tailcall and freplace restrictions")
Signed-off-by: Tengda Wu <wutengda@huaweicloud.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/bpf/20250122022838.1079157-1-wutengda@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a0130ef84b ]
Destroy all previously created cache entries and work queue when rolling
back the MR cache initialization upon an error.
Fixes: 73d09b2fe8 ("RDMA/mlx5: Introduce mlx5r_cache_rb_key")
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Reviewed-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://patch.msgid.link/c41d525fb3c72e28dd38511bf3aaccb5d584063e.1741875692.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a5779e625e ]
of_parse_phandle_with_fixed_args() requires its caller to
call into of_node_put() on the node pointer from the output
structure, but such a call is currently missing.
Call into of_node_put() to rectify that.
Fixes: c4c4637eb5 ("pinctrl: renesas: Add RZ/G2L pin and gpio controller driver")
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250305163753.34913-3-fabrizio.castro.jz@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit abcdeb4e29 ]
of_parse_phandle_with_fixed_args() requires its caller to
call into of_node_put() on the node pointer from the output
structure, but such a call is currently missing.
Call into of_node_put() to rectify that.
Fixes: b59d0e7827 ("pinctrl: Add RZ/A2 pin and gpio controller")
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250305163753.34913-5-fabrizio.castro.jz@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit af324dc0e2 ]
The static code analysis tool "Coverity Scan" pointed the following
implementation details out for further development considerations:
CID 1309755: Unused value
In sw842_compress: A value assigned to a variable is never used. (CWE-563)
returned_value: Assigning value from add_repeat_template(p, repeat_count)
to ret here, but that stored value is overwritten before it can be used.
Conclusion:
Add error handling for the return value from an add_repeat_template()
call.
Fixes: 2da572c959 ("lib: add software 842 compression/decompression")
Signed-off-by: Tanya Agarwal <tanyaagarwal25699@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b4a8b5bba7 ]
bpf_send_signal_common() uses preemptible() to check whether or not the
current context is preemptible. If it is preemptible, it will use
irq_work to send the signal asynchronously instead of trying to hold a
spin-lock, because spin-lock is sleepable under PREEMPT_RT.
However, preemptible() depends on CONFIG_PREEMPT_COUNT. When
CONFIG_PREEMPT_COUNT is turned off (e.g., CONFIG_PREEMPT_VOLUNTARY=y),
!preemptible() will be evaluated as 1 and bpf_send_signal_common() will
use irq_work unconditionally.
Fix it by unfolding "!preemptible()" and using "preempt_count() != 0 ||
irqs_disabled()" instead.
Fixes: 87c544108b ("bpf: Send signals asynchronously if !preemptible")
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20250220042259.1583319-1-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b60521eff2 ]
The GPU clock is required for CPU access to GPUSS registers. It was
previously decided (on this and many more platforms) that the added
overhead/hassle introduced by keeping track of it would not bring much
measurable improvement in the power department.
The display clock is basically the same story over again.
Now, we're past that discussion and this commit is not trying to change
that. Instead, the clocks are both force-enabled in .probe *and*
registered with the common clock framework, resulting in them being
toggled off after ignore_unused.
Unregister said clocks to fix breakage when clk_ignore_unused is absent
(as it should be).
Fixes: 161b7c401f ("clk: qcom: Add Global Clock controller (GCC) driver for X1E80100")
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250111-topic-x1e_fixups-v1-1-77dc39237c12@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ba785ff416 ]
MSM8226 requires the CX power domain, so use the msm8996_adsp_resource
which has cx under proxy_pd_names and is otherwise equivalent.
Suggested-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Fixes: fb4f07cc93 ("remoteproc: qcom: pas: Add MSM8226 ADSP support")
Signed-off-by: Luca Weiss <luca@lucaweiss.eu>
Reviewed-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Link: https://lore.kernel.org/r/20250128-pas-singlepd-v1-1-85d9ae4b0093@lucaweiss.eu
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bde5582208 ]
It may happen that the variable req->iv may have stale values or
zero sized buffer by default and may end up getting used during
encryption/decryption. This inturn may corrupt the results or break the
operation. Set the req->iv variable to NULL explicitly for algorithms
like AES-ECB where IV is not used.
Fixes: 0880bb3b00 ("crypto: tegra - Add Tegra Security Engine driver")
Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit be35a3127d ]
In the function mana_ib_gd_create_dma_region if there are no dma blocks
to process the variable `err` remains uninitialized.
Fixes: 0266a17763 ("RDMA/mana_ib: Add a driver for Microsoft Azure Network Adapter")
Signed-off-by: Kees Bakker <kees@ijzerbout.nl>
Link: https://patch.msgid.link/20250221195833.7516C16290A@bout3.ijzerbout.nl
Reviewed-by: Long Li <longli@microsoft.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c94bff63e4 ]
It turns out that while s390 architecture calls its memory-I/O mapping
variants write-through and write-back the implementation of ioremap_wt()
and pgprot_writethrough() does not match Linux notion of ioremap_wt().
In particular Linux expects ioremap_wt() to be weaker still than
ioremap_wc(), allowing not just gathering and re-ordering but also reads
to be served from cache. Instead s390's implementation is equivalent to
normal ioremap() while its ioremap_wc() allows re-ordering.
Note that there are no known users of ioremap_wt() on s390 and the
resulting behavior is in line with asm-generic defining ioremap_wt() as
ioremap(), if undefined, so no breakage is expected.
As s390 does not have a mapping type matching the Linux notion of
ioremap_wt() and pgprot_writethrough(), simply drop them and rely on the
asm-generic fallbacks instead.
Fixes: b02002cc4c ("s390/pci: Implement ioremap_wc/prot() with MIO")
Fixes: b43b3fff04 ("s390: mm: convert to GENERIC_IOREMAP")
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cdc59600bc ]
This clock can't be enable with VENUS_CORE0 GDSC turned off. But that
GDSC is under HW control so it can be turned off at any moment.
Instead of checking the dependent clock we can just vote for it to
enable later when GDSC gets turned on.
Fixes: 9bb6cfc3c7 ("clk: qcom: Add Global Clock Controller driver for MSM8953")
Signed-off-by: Vladimir Lypak <vladimir.lypak@gmail.com>
Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
Link: https://lore.kernel.org/r/20250315-clock-fix-v1-2-2efdc4920dda@mainlining.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ce390d6c26 ]
Saving and restoring of the intermediate results are needed if there is
context switch caused by another ongoing request on the same engine.
This is therefore not only to support import/export functionality.
Hence, save and restore the intermediate result for every non-first task.
Fixes: 0880bb3b00 ("crypto: tegra - Add Tegra Security Engine driver")
Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d19d7345a7 ]
With UBSAN_ARRAY_BOUNDS=y, I'm hitting the below panic due to
dereferencing `ctx->clk_data.hws` before setting
`ctx->clk_data.num = nr_clks`. Move that up to fix the crash.
UBSAN: array index out of bounds: 00000000f2005512 [#1] PREEMPT SMP
<snip>
Call trace:
samsung_clk_init+0x110/0x124 (P)
samsung_clk_init+0x48/0x124 (L)
samsung_cmu_register_one+0x3c/0xa0
exynos_arm64_register_cmu+0x54/0x64
__gs101_cmu_top_of_clk_init_declare+0x28/0x60
...
Fixes: e620a1e061 ("drivers/clk: convert VL struct to struct_size")
Signed-off-by: Will McVicker <willmcvicker@google.com>
Link: https://lore.kernel.org/r/20250212183253.509771-1-willmcvicker@google.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dc0f16c1b7 ]
On the RZ/G3S SoC, the CPU PLL settings can be set and retrieved through
the CPG_PLL1_CLK1 and CPG_PLL1_CLK2 registers. However, these settings
are applied only when CPG_PLL1_SETTING.SEL_PLL1 is set to 0.
Otherwise, the CPU PLL operates at the default frequency of 1.1 GHz.
Hence add support to the PLL driver for returning the 1.1 GHz frequency
when the CPU PLL is configured with the default frequency.
Fixes: 01eabef547 ("clk: renesas: rzg2l: Add support for RZ/G3S PLL")
Fixes: de60a3ebe4 ("clk: renesas: Add minimal boot support for RZ/G3S SoC")
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250115142059.1833063-1-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dc84bc2aba ]
If track_pfn_copy() fails, we already added the dst VMA to the maple
tree. As fork() fails, we'll cleanup the maple tree, and stumble over
the dst VMA for which we neither performed any reservation nor copied
any page tables.
Consequently untrack_pfn() will see VM_PAT and try obtaining the
PAT information from the page table -- which fails because the page
table was not copied.
The easiest fix would be to simply clear the VM_PAT flag of the dst VMA
if track_pfn_copy() fails. However, the whole thing is about "simply"
clearing the VM_PAT flag is shaky as well: if we passed track_pfn_copy()
and performed a reservation, but copying the page tables fails, we'll
simply clear the VM_PAT flag, not properly undoing the reservation ...
which is also wrong.
So let's fix it properly: set the VM_PAT flag only if the reservation
succeeded (leaving it clear initially), and undo the reservation if
anything goes wrong while copying the page tables: clearing the VM_PAT
flag after undoing the reservation.
Note that any copied page table entries will get zapped when the VMA will
get removed later, after copy_page_range() succeeded; as VM_PAT is not set
then, we won't try cleaning VM_PAT up once more and untrack_pfn() will be
happy. Note that leaving these page tables in place without a reservation
is not a problem, as we are aborting fork(); this process will never run.
A reproducer can trigger this usually at the first try:
https://gitlab.com/davidhildenbrand/scratchspace/-/raw/main/reproducers/pat_fork.c
WARNING: CPU: 26 PID: 11650 at arch/x86/mm/pat/memtype.c:983 get_pat_info+0xf6/0x110
Modules linked in: ...
CPU: 26 UID: 0 PID: 11650 Comm: repro3 Not tainted 6.12.0-rc5+ #92
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-2.fc40 04/01/2014
RIP: 0010:get_pat_info+0xf6/0x110
...
Call Trace:
<TASK>
...
untrack_pfn+0x52/0x110
unmap_single_vma+0xa6/0xe0
unmap_vmas+0x105/0x1f0
exit_mmap+0xf6/0x460
__mmput+0x4b/0x120
copy_process+0x1bf6/0x2aa0
kernel_clone+0xab/0x440
__do_sys_clone+0x66/0x90
do_syscall_64+0x95/0x180
Likely this case was missed in:
d155df53f3 ("x86/mm/pat: clear VM_PAT if copy_p4d_range failed")
... and instead of undoing the reservation we simply cleared the VM_PAT flag.
Keep the documentation of these functions in include/linux/pgtable.h,
one place is more than sufficient -- we should clean that up for the other
functions like track_pfn_remap/untrack_pfn separately.
Fixes: d155df53f3 ("x86/mm/pat: clear VM_PAT if copy_p4d_range failed")
Fixes: 2ab640379a ("x86: PAT: hooks in generic vm code to help archs to track pfnmap regions - v3")
Reported-by: xingwei lee <xrivendell7@gmail.com>
Reported-by: yuxin wang <wang1315768607@163.com>
Reported-by: Marius Fleischer <fleischermarius@gmail.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-mm@kvack.org
Link: https://lore.kernel.org/r/20250321112323.153741-1-david@redhat.com
Closes: https://lore.kernel.org/lkml/CABOYnLx_dnqzpCW99G81DmOr+2UzdmZMk=T3uxwNxwz+R1RAwg@mail.gmail.com/
Closes: https://lore.kernel.org/lkml/CAJg=8jwijTP5fre8woS4JVJQ8iUA6v+iNcsOgtj9Zfpc3obDOQ@mail.gmail.com/
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit de07b18289 ]
The strncmp benchmark uses the bpf_strncmp helper and a hand-written
loop to compare two strings. The values of the strings are filled from
userspace. One of the strings is non-const (in .bss) while the other is
const (in .rodata) since that is the requirement of bpf_strncmp.
The problem is that in the hand-written loop, Clang optimizes the reads
from the const string to always return 0 which breaks the benchmark.
Use barrier_var to prevent the optimization.
The effect can be seen on the strncmp-no-helper variant.
Before this change:
# ./bench strncmp-no-helper
Setting up benchmark 'strncmp-no-helper'...
Benchmark 'strncmp-no-helper' started.
Iter 0 (112.309us): hits 0.000M/s ( 0.000M/prod), drops 0.000M/s, total operations 0.000M/s
Iter 1 (-23.238us): hits 0.000M/s ( 0.000M/prod), drops 0.000M/s, total operations 0.000M/s
Iter 2 ( 58.994us): hits 0.000M/s ( 0.000M/prod), drops 0.000M/s, total operations 0.000M/s
Iter 3 (-30.466us): hits 0.000M/s ( 0.000M/prod), drops 0.000M/s, total operations 0.000M/s
Iter 4 ( 29.996us): hits 0.000M/s ( 0.000M/prod), drops 0.000M/s, total operations 0.000M/s
Iter 5 ( 16.949us): hits 0.000M/s ( 0.000M/prod), drops 0.000M/s, total operations 0.000M/s
Iter 6 (-60.035us): hits 0.000M/s ( 0.000M/prod), drops 0.000M/s, total operations 0.000M/s
Summary: hits 0.000 ± 0.000M/s ( 0.000M/prod), drops 0.000 ± 0.000M/s, total operations 0.000 ± 0.000M/s
After this change:
# ./bench strncmp-no-helper
Setting up benchmark 'strncmp-no-helper'...
Benchmark 'strncmp-no-helper' started.
Iter 0 ( 77.711us): hits 5.534M/s ( 5.534M/prod), drops 0.000M/s, total operations 5.534M/s
Iter 1 ( 11.215us): hits 6.006M/s ( 6.006M/prod), drops 0.000M/s, total operations 6.006M/s
Iter 2 (-14.253us): hits 5.931M/s ( 5.931M/prod), drops 0.000M/s, total operations 5.931M/s
Iter 3 ( 59.087us): hits 6.005M/s ( 6.005M/prod), drops 0.000M/s, total operations 6.005M/s
Iter 4 (-21.379us): hits 6.010M/s ( 6.010M/prod), drops 0.000M/s, total operations 6.010M/s
Iter 5 (-20.310us): hits 5.861M/s ( 5.861M/prod), drops 0.000M/s, total operations 5.861M/s
Iter 6 ( 53.937us): hits 6.004M/s ( 6.004M/prod), drops 0.000M/s, total operations 6.004M/s
Summary: hits 5.969 ± 0.061M/s ( 5.969M/prod), drops 0.000 ± 0.000M/s, total operations 5.969 ± 0.061M/s
Fixes: 9c42652f8b ("selftests/bpf: Add benchmark for bpf_strncmp() helper")
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Viktor Malik <vmalik@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/bpf/20250313122852.1365202-1-vmalik@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e0525cd72b ]
Fix theoretical NULL dereference in linker when resolving *extern*
STT_SECTION symbol against not-yet-existing ELF section. Not sure if
it's possible in practice for valid ELF object files (this would require
embedded assembly manipulations, at which point BTF will be missing),
but fix the s/dst_sym/dst_sec/ typo guarding this condition anyways.
Fixes: faf6ed321c ("libbpf: Add BPF static linker APIs")
Fixes: a46349227c ("libbpf: Add linker extern resolution support for functions and global variables")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20250220002821.834400-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e917b73234 ]
Only go into the if condition for single-PD handling when there's
actually just one power domain specified there. Otherwise it'll be an
issue in the dts and we should fail in the regular code path.
This also mirrors the latest changes in the qcom_q6v5_mss driver.
Suggested-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Fixes: 17ee2fb4e8 ("remoteproc: qcom: pas: Vote for active/proxy power domains")
Signed-off-by: Luca Weiss <luca@lucaweiss.eu>
Reviewed-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Link: https://lore.kernel.org/r/20250128-pas-singlepd-v1-2-85d9ae4b0093@lucaweiss.eu
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ea40653456 ]
Suppress binding attributes for the rzg2l pinctrl driver, as it is an
essential block for Renesas SoCs. Unbinding the driver leads to
warnings from __device_links_no_driver() and can eventually render the
system inaccessible.
Fixes: c4c4637eb5 ("pinctrl: renesas: Add RZ/G2L pin and gpio controller driver")
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250215131235.228274-1-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
