Pull an operating performance points (OPP) framework fix for 5.8-rc6 from
Viresh Kumar:
"This fixes freeing of the OPP entries for the legacy OPP table type (v1)."
* 'opp/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
opp: Increase parsed_static_opps in _of_add_opp_table_v1()
Commit 3b4b19721e ("nvme: fix possible deadlock when I/O is
blocked") reverted multipath head disk revalidation due to deadlocks
caused by holding the bd_mutex during revalidate.
Updating the multipath disk blockdev size is still required though for
userspace to be able to observe any resizing while the device is
mounted. Directly update the bdev inode size to avoid unnecessarily
holding the bdev->bd_mutex.
Fixes: 3b4b19721e ("nvme: fix possible deadlock when I/O is
blocked")
Signed-off-by: Anthony Iliopoulos <ailiop@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
ROCE uses "VA % buf_page_size" to caclulate the offset in the PBL's first
page, the actual PA corresponding to the MR's VA is equal to MR's PA plus
this offset. The first PA in PBL has already been aligned to PAGE_SIZE
after calling ib_umem_get(), but the MR's VA may not. If the buf_page_size
is smaller than the PAGE_SIZE, this will lead the HW to access the wrong
memory because the offset is smaller than expected.
Fixes: 9b2cf76c9f ("RDMA/hns: Optimize PBL buffer allocation process")
Link: https://lore.kernel.org/r/1594726935-45666-1-git-send-email-liweihang@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The RoCE Engine will schedule to another QP after one has sent
(2 ^ lp_pktn_ini) packets. lp_pktn_ini is set in QPC and should be
calculated from 2 factors:
1. current MTU as a integer
2. the RoCE Engine's maximum slice length 64KB
But the driver use MTU as a enum ib_mtu and the max inline capability, the
lp_pktn_ini will be much bigger than expected which may cause traffic of
some QPs to never get scheduled.
Fixes: b713128de7 ("RDMA/hns: Adjust lp_pktn_ini dynamically")
Link: https://lore.kernel.org/r/1594726138-49294-1-git-send-email-liweihang@huawei.com
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Rather than open-code test_tsk_thread_flag() at each callsite, simply
replace the couple of offenders with calls to test_tsk_thread_flag()
directly.
Signed-off-by: Will Deacon <will@kernel.org>
Setting a system call number of -1 is special, as it indicates that the
current system call should be skipped.
Use NO_SYSCALL instead of -1 when checking for this scenario, which is
different from the -1 returned due to a seccomp failure.
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Keno Fischer <keno@juliacomputing.com>
Cc: Luis Machado <luis.machado@linaro.org>
Signed-off-by: Will Deacon <will@kernel.org>
If a task executes syscall(-1), we intercept this early and force x0 to
be -ENOSYS so that we don't need to distinguish this scenario from one
where the scno is -1 because a tracer wants to skip the system call
using ptrace. With the return value set, the return path is the same as
the skip case.
Although there is a one-line comment noting this in el0_svc_common(), it
misses out most of the detail. Expand the comment to describe a bit more
about what is going on.
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Keno Fischer <keno@juliacomputing.com>
Cc: Luis Machado <luis.machado@linaro.org>
Signed-off-by: Will Deacon <will@kernel.org>
Our tracehook logic for syscall entry/exit raises a SIGTRAP back to the
tracer following a ptrace request such as PTRACE_SYSCALL. As part of this
procedure, we clobber the reported value of one of the tracee's general
purpose registers (x7 for native tasks, r12 for compat) to indicate
whether the stop occurred on syscall entry or exit. This is a slightly
unfortunate ABI, as it prevents the tracer from accessing the real
register value and is at odds with other similar stops such as seccomp
traps.
Since we're stuck with this ABI, expand the comment in our tracehook
logic to acknowledge the issue and describe the behaviour in more detail.
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Luis Machado <luis.machado@linaro.org>
Reported-by: Keno Fischer <keno@juliacomputing.com>
Signed-off-by: Will Deacon <will@kernel.org>
Although we zero the upper bits of x0 on entry to the kernel from an
AArch32 task, we do not clear them on the exception return path and can
therefore expose 64-bit sign extended syscall return values to userspace
via interfaces such as the 'perf_regs' ABI, which deal exclusively with
64-bit registers.
Explicitly clear the upper 32 bits of x0 on return from a compat system
call.
Cc: <stable@vger.kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Keno Fischer <keno@juliacomputing.com>
Cc: Luis Machado <luis.machado@linaro.org>
Signed-off-by: Will Deacon <will@kernel.org>
Luis reports that, when reverse debugging with GDB, single-step does not
function as expected on arm64:
| I've noticed, under very specific conditions, that a PTRACE_SINGLESTEP
| request by GDB won't execute the underlying instruction. As a consequence,
| the PC doesn't move, but we return a SIGTRAP just like we would for a
| regular successful PTRACE_SINGLESTEP request.
The underlying problem is that when the CPU register state is restored
as part of a reverse step, the SPSR.SS bit is cleared and so the hardware
single-step state can transition to the "active-pending" state, causing
an unexpected step exception to be taken immediately if a step operation
is attempted.
In hindsight, we probably shouldn't have exposed SPSR.SS in the pstate
accessible by the GPR regset, but it's a bit late for that now. Instead,
simply prevent userspace from configuring the bit to a value which is
inconsistent with the TIF_SINGLESTEP state for the task being traced.
Cc: <stable@vger.kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Keno Fischer <keno@juliacomputing.com>
Link: https://lore.kernel.org/r/1eed6d69-d53d-9657-1fc9-c089be07f98c@linaro.org
Reported-by: Luis Machado <luis.machado@linaro.org>
Tested-by: Luis Machado <luis.machado@linaro.org>
Signed-off-by: Will Deacon <will@kernel.org>
Although the arm64 single-step state machine can be fast-forwarded in
cases where we wish to generate a SIGTRAP without actually executing an
instruction, this has two major limitations outside of simply skipping
an instruction due to emulation.
1. Stepping out of a ptrace signal stop into a signal handler where
SIGTRAP is blocked. Fast-forwarding the stepping state machine in
this case will result in a forced SIGTRAP, with the handler reset to
SIG_DFL.
2. The hardware implicitly fast-forwards the state machine when executing
an SVC instruction for issuing a system call. This can interact badly
with subsequent ptrace stops signalled during the execution of the
system call (e.g. SYSCALL_EXIT or seccomp traps), as they may corrupt
the stepping state by updating the PSTATE for the tracee.
Resolve both of these issues by injecting a pseudo-singlestep exception
on entry to a signal handler and also on return to userspace following a
system call.
Cc: <stable@vger.kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Tested-by: Luis Machado <luis.machado@linaro.org>
Reported-by: Keno Fischer <keno@juliacomputing.com>
Signed-off-by: Will Deacon <will@kernel.org>
The driver would happily overwrite its write buffer with user data in
256 byte increments due to a removed buffer-space sanity check.
Fixes: 5fcf62b0f1 ("tty: iuu_phoenix: fix locking.")
Cc: stable <stable@vger.kernel.org> # 2.6.31
Signed-off-by: Johan Hovold <johan@kernel.org>
ASUS UX563 speaker can't output.
Add quirk to link suitable model will enable it.
This model also could enable headset Mic.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/96dee3ab01a04c28a7b44061e88009dd@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ASUS UX533 and UX534 speaker still can't output.
End User feedback speaker didn't have output.
Add this COEF value will enable it.
Fixes: 4e05110673 ("ALSA: hda/realtek: Enable audio jacks of ASUS UX533FD with ALC294")
Cc: <stable@vger.kernel.org>
Signed-off-by: Kailang Yang <kailang@realtek.com>
Link: https://lore.kernel.org/r/80334402a93b48e385f8f4841b59ae09@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We recently moved setting inode flag OVL_UPPERDATA to ovl_lookup().
When looking up an overlay dentry, upperdentry may be found by index
and not by name. In that case, we fail to read the metacopy xattr
and falsly set the OVL_UPPERDATA on the overlay inode.
This caused a regression in xfstest overlay/033 when run with
OVERLAY_MOUNT_OPTIONS="-o metacopy=on".
Fixes: 28166ab3c8 ("ovl: initialize OVL_UPPERDATA in ovl_lookup()")
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
The check if user has changed the overlay file was wrong, causing unneeded
call to ovl_change_flags() including taking f_lock on every file access.
Fixes: d989903058 ("ovl: do not generate duplicate fsnotify events for "fake" path")
Cc: <stable@vger.kernel.org> # v4.19+
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Drop the doubled word "by" in a comment.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Drop doubled words in several comments.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Drop doubled word "the" in a comment.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Drop doubled word "to" in a comment.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Drop doubled words "or" and "the" in several comments.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Drop doubled word "not" in a comment.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Drop doubled words in two comments.
Fix a spello/typo.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Drop doubled words in several comments.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Drop doubled word "the" in two comments.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, when using _of_add_opp_table_v2 parsed_static_opps is
increased and this value is used in _opp_remove_all_static() to
check if there are static opp entries that need to be freed.
Unfortunately this does not happen when using _of_add_opp_table_v1(),
which leads to warnings.
This patch increases parsed_static_opps in _of_add_opp_table_v1() in a
similar way as in _of_add_opp_table_v2().
Fixes: 03758d6026 ("opp: Replace list_kref with a local counter")
Cc: v5.6+ <stable@vger.kernel.org> # v5.6+
Signed-off-by: Walter Lozano <walter.lozano@collabora.com>
[ Viresh: Do the operation with lock held and set the value to 1 instead
of incrementing it ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
the eMMC clk on AST2600 SoCs that fixes the rate that is calculated by
the clk framework.
-----BEGIN PGP SIGNATURE-----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=TzDz
-----END PGP SIGNATURE-----
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux into master
Pull clk fixes from Stephen Boyd:
"A couple build fixes for issues exposed this merge window and a fix
for the eMMC clk on AST2600 SoCs that fixes the rate that is
calculated by the clk framework"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: Specify IOMEM dependency for HSDK pll driver
clk: AST2600: Add mux for EMMC clock
clk: mvebu: ARMADA_AP_CPU_CLK needs to select ARMADA_AP_CP_HELPER
If ax88172a_unbind() fails, make sure that the return code is
less than zero so that cleanup is done properly and avoid UAF.
Fixes: a9a51bd727 ("ax88172a: fix information leak on short answers")
Signed-off-by: George Kennedy <george.kennedy@oracle.com>
Reported-by: syzbot+4cd84f527bf4a10fc9c1@syzkaller.appspotmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The word 'descriptor' is misspelled throughout the tree.
Fix it up accordingly:
decriptor -> descriptor
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ido Schimmel says:
====================
mlxsw: Offload tc police action
This patch set adds support for tc police action in mlxsw.
Patches #1-#2 add defines for policer bandwidth limits and resource
identifiers (e.g., maximum number of policers).
Patch #3 adds a common policer core in mlxsw. Currently it is only used
by the policy engine, but future patch sets will use it for trap
policers and storm control policers. The common core allows us to share
common logic between all policer types and abstract certain details from
the various users in mlxsw.
Patch #4 exposes the maximum number of supported policers and their
current usage to user space via devlink-resource. This provides better
visibility and also used for selftests purposes.
Patches #5-#7 gradually add support for tc police action in the policy
engine by calling into previously mentioned policer core.
Patch #8 adds a generic selftest for tc-police that can be used with
veth pairs or physical loopbacks.
Patches #9-#11 add mlxsw-specific selftests.
====================
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Test that policers shared by different tc filters are correctly
reference counted by observing policers' occupancy via devlink-resource.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Query the maximum number of supported policers using devlink-resource
and test that this number can be reached by configuring tc filters with
police action. Test that an error is returned in case the maximum number
is exceeded.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Test that upper and lower limits on rate and burst size imposed by the
device are rejected by the kernel.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Test tc-police action in various scenarios such as Rx policing, Tx
policing, shared policer and police piped to mirred. The test passes
with both veth pairs and loopbacked ports.
# ./tc_police.sh
TEST: police on rx [ OK ]
TEST: police on tx [ OK ]
TEST: police with shared policer - rx [ OK ]
TEST: police with shared policer - tx [ OK ]
TEST: police rx and mirror [ OK ]
TEST: police tx and mirror [ OK ]
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Offload action police when used with a flower classifier. The number of
dropped packets is read from the policer and reported to tc.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add core functionality required to support police action in the policy
engine.
The utilized hardware policers are stored in a hash table keyed by the
flow action index. This allows to support policer sharing between
multiple ACL rules.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In the policy engine, each ACL rule points to an action block where the
ACL actions are stored. Each action block consists of one or more action
sets. Each action set holds one or more individual actions, up to a
maximum queried from the device. For example:
Action set #1 Action set #2
+----------+ +--------------+ +--------------+
| ACL rule +----------> Action #1 | +-----> Action #4 |
+----------+ +--------------+ | +--------------+
| Action #2 | | | Action #5 |
+--------------+ | +--------------+
| Action #3 +------+ | |
+--------------+ +--------------+
<---------+ Action block +----------------->
The hardware has a limitation that prevents a policing action
(MLXSW_AFA_POLCNT_CODE when used with a policer, not a counter) from
being configured in the same action set with a trap action (i.e.,
MLXSW_AFA_TRAP_CODE or MLXSW_AFA_TRAPWU_CODE). Note that the latter used
to implement multiple actions: 'trap', 'mirred', 'drop'.
Work around this limitation by teaching mlxsw_afa_block_append_action()
to create a new action set not only when there is no more room left in
the current set, but also when there is a conflict between previously
mentioned actions.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Expose via devlink-resource the maximum number of single-rate policers
and their current occupancy. Example:
$ devlink resource show pci/0000:01:00.0
...
name global_policers size 1000 unit entry dpipe_tables none
resources:
name single_rate_policers size 968 occ 0 unit entry dpipe_tables none
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add common code to handle all policer-related functionality in mlxsw.
Currently, only policer for policy engines are supported, but it in the
future more policer families will be added such as CPU (trap) policers
and storm control policers.
The API allows different modules to add / delete policers and read their
drop counter.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a resource identifier for maximum global policers so that it could
be later used to query the information from firmware.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add policer bandwidth limits for both rate and burst size so that they
could be enforced by a later patch.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remove the unnecessary label from dn_dev_ioctl() and make its error
handling simpler to read.
Signed-off-by: Suraj Upadhyay <usuraj35@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The concept of timestamping DSA switches / Ethernet PHYs is becoming
more and more popular, however the Linux kernel timestamping code has
evolved quite organically and there's layers upon layers of new and old
code that need to work together for things to behave as expected.
Add this chapter to explain what the overall goals are.
Loosely based upon this email discussion plus some more info:
https://lkml.org/lkml/2020/7/6/481
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
