Add support for CAN_CTRLMODE_BERR_REPORTING,
allowing Bus Error Reporting to be enabled or disabled.
Previously, Bus Error Reporting was always active.
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Link: https://patch.msgid.link/20241230142645.128244-2-extja@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Ensure statistics, error counters, and CAN state are updated consistently,
even when alloc_can_err_skb() fails during state changes or error message
frame reception.
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Link: https://patch.msgid.link/20241230142645.128244-1-extja@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The SRAM memory shared pointed to by the st,gcan property is unique, so
we don't need an array of phandles.
Fixes: e43250c0ac ("dt-bindings: net: can: add STM32 bxcan DT bindings")
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20241228150043.3926696-1-dario.binacchi@amarulasolutions.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Sean Nyekjaer <sean@geanix.com> says:
When downing the tcan4x5x there is no reason to keep the tcan4x5x in
"normal" mode and waste power. So set standby mode when the interface
is down and normal mode when interface is up.
Also when going into suspend, set the tcan4x5x into standby mode. The
tcan4x5x can still be used as a wake-source when in standby as low
power RX is enabled.
Link: https://patch.msgid.link/20241122-tcan-standby-v3-0-90bafaf5eccd@geanix.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
This is added in preparation for calling standby mode in the tcan4x5x
driver or other users of m_can.
For the tcan4x5x; If Vsup 12V, standby mode will save 7-8mA, when the
interface is down.
Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Link: https://patch.msgid.link/20241122-tcan-standby-v3-1-90bafaf5eccd@geanix.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The extended match rule em_canid is used to classify CAN frames based
on their CAN Identifier. To keep the CAN maintainers in the loop for
relevant changes which might affect the CAN specific functionality add
em_canid.c to the CAN NETWORK LAYER files.
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://patch.msgid.link/20241219190837.3087-1-socketcan@hartkopp.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Map my retired company address and an accidentally used personal
mail address within mailmap.
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://patch.msgid.link/20241130170911.2828-1-socketcan@hartkopp.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Convert old text based binding to json schema.
Changes during conversion:
- Add a fallback for `microchip,sam9x60-can` as it is compatible with the
CAN IP core on `atmel,at91sam9x5-can`.
- Add the required properties `clock` and `clock-names`, which were
missing in the original binding.
- Update examples and include appropriate file directives to resolve
errors identified by `dt_binding_check` and `dtbs_check`.
Signed-off-by: Charan Pedumuru <charan.pedumuru@microchip.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20241120-can-v3-1-da5bb4f6128d@microchip.com
[mkl: fixed indention in example]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
tcan4x5x devices only requires the clock "cclk", so call
devm_clk_get() directly. This is done to avoid
m_can_class_get_clocks() that checks for both hclk and cclk and
results in this warning message:
| tcan4x5x spi0.0: no clock found
Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Link: https://patch.msgid.link/20241128-mcancclk-v1-1-a93aac64dbae@geanix.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Throughout the sun4i_can_err() function, the likely() macro is used to
check the skb buffer, except in one instance. This patch makes the code
consistent by using the macro in that case as well.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Link: https://patch.msgid.link/20241122221650.633981-4-dario.binacchi@amarulasolutions.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The nWKRQ pin supports an output voltage of either the internal reference
voltage (3.6V) or the reference voltage of
the digital interface 0-6V (VIO).
Add the devicetree option ti,nwkrq-voltage-vio to set it to VIO.
If this property is omitted the reset default, the internal reference
voltage, is used.
Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Reviewed-by: Marc Kleine-Budde <mkl@pengutronix.de>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://patch.msgid.link/20241114-tcan-wkrqv-v5-2-a2d50833ed71@geanix.com
[mkl: remove unused variable in tcan4x5x_get_dt_data()]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The nWKRQ pin supports an output voltage of either the internal reference
voltage (3.6V) or the reference voltage of
the digital interface 0-6V (VIO).
Add the devicetree option ti,nwkrq-voltage-vio to set it to VIO.
If this property is omitted the reset default, the internal reference
voltage, is used.
Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://patch.msgid.link/20241114-tcan-wkrqv-v5-1-a2d50833ed71@geanix.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
PIC64GX CAN is compatible with the MPFS CAN, only add a fallback
Signed-off-by: Pierre-Henry Moussay <pierre-henry.moussay@microchip.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://patch.msgid.link/20240930095449.1813195-2-pierre-henry.moussay@microchip.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
A few fairly minor driver specific fixes, plus one core fix for the
handling of deferred probe on ACPI systems - we ignoring probe deferral
and incorrectly treating it like a fatal error while parsing the generic
ACPI bindings for SPI devices.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmdIdgMACgkQJNaLcl1U
h9BsXgf/SGFL0F1LrCCrsaWAZBg9maNijUI3bDqwt11cKMtyhxHMlbFM8x2CDQAG
HE3J39RBzKTIFYyGbflw8ogVSWwDiPv4S9W0LO2VfGXUtuN6PBIjNfBHbrskX55Y
5Dm470w+rW9GKz2dvTGqw9R1NdmgfpfMI/sffUsrpqSgHMkfB/vFfB9KhqQqRUpt
5fiy5KdZ0f9jz7huvnRULSS7yYl85xXHFKVMrBnQ6jVuAO8s5k16hDhxjY1TECpC
0uJ++WAE+nuVqUAdZ9zQQknV46JO6Vth+3dADvfTiKJGA2baUpn/9oZKms5OViDK
DkGnqlvgluSXEz4d92SzOd3VkrEmwQ==
=0oAO
-----END PGP SIGNATURE-----
Merge tag 'spi-fix-v6.13-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A few fairly minor driver specific fixes, plus one core fix for the
handling of deferred probe on ACPI systems - ignoring probe deferral
and incorrectly treating it like a fatal error while parsing the
generic ACPI bindings for SPI devices"
* tag 'spi-fix-v6.13-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: Fix acpi deferred irq probe
spi: atmel-quadspi: Fix register name in verbose logging function
spi-imx: prevent overflow when estimating transfer time
spi: rockchip-sfc: Embedded DMA only support 4B aligned address
A couple of fixes that came in during the merge window, plus
documetation of a new device ID for the Qualcomm LABIBB driver. There's
a core fix for the rarely used current constraints and a fix for the
Qualcomm RPMH driver which had described only one of the two voltage
ranges that the hardware could control, creating a potential
incompatibility with the configuration left by firmware.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmdIcWQACgkQJNaLcl1U
h9DfPAf/T/w7ZNWOR52sK8et3itHVVu3YSxB92fMz/CdesUgApi2Q6Py/gw1sduQ
mY6vUd3aLkTI1Qi+XifeoRKOdRud0GRcgVILdg0J/KgzJ7EXEJ4pxE+uLE6Etuop
TGD9CY/rsX92vk9aOSPBPXfNtYB8JfBH4EgJSmHYl3V3kNe1jA32IbGUOVahA+vW
r9M1M40fuE6AsvfX47oN2mird9HyRjTRwwtrMzR8pqq3AZ8CRpPhngaxVpotmGOZ
UEaJj83WXKtja9iezYTQYmhj9yfw/c7A4UdqUFjAeScRHYxl3U+kue8MpjND1DQZ
kQfsgFoYLN6CTBhnognp1oyovixztQ==
=Lhu/
-----END PGP SIGNATURE-----
Merge tag 'regulator-fix-v6.13-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"A couple of fixes that came in during the merge window, plus
documetation of a new device ID for the Qualcomm LABIBB driver.
There's a core fix for the rarely used current constraints and a fix
for the Qualcomm RPMH driver which had described only one of the two
voltage ranges that the hardware could control, creating a potential
incompatibility with the configuration left by firmware"
* tag 'regulator-fix-v6.13-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: core: Ignore unset max_uA constraints in current limit check
dt-bindings: regulator: qcom-labibb-regulator: document the pmi8950 labibb regulator
regulator: qcom-rpmh: Update ranges for FTSMPS525
* power-supply core
- replace power_supply_register_no_ws() with power_supply_register() and a
new "no_wakeup_source" field in struct power_supply_config
- constify battery info tables in the core and all drivers
- switch back to remove callback for all platform drivers
- allow power_supply_put() to be called from atomic context
- mark attribute arrays read-only after init
* power-supply drivers
- new driver for TWL6030 and TWL6032
- rk817: improve battery capacity calibration
- misc. small cleanups and fixes
-----BEGIN PGP SIGNATURE-----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=vpkz
-----END PGP SIGNATURE-----
Merge tag 'for-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply and reset updates from Sebastian Reichel:
"Power-supply core:
- replace power_supply_register_no_ws() with power_supply_register()
and a new "no_wakeup_source" field in struct power_supply_config
- constify battery info tables in the core and all drivers
- switch back to remove callback for all platform drivers
- allow power_supply_put() to be called from atomic context
- mark attribute arrays read-only after init
Power-supply drivers:
- new driver for TWL6030 and TWL6032
- rk817: improve battery capacity calibration
- misc small cleanups and fixes"
* tag 'for-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (42 commits)
power: reset: ep93xx: add AUXILIARY_BUS dependency
dt-bindings: power: reset: Convert mode-.* properties to array
power: supply: sc27xx: Fix battery detect GPIO probe
dt-bindings: power: supply: sc27xx-fg: document deprecated bat-detect-gpio
reset: keystone-reset: remove unused macros
power: supply: axp20x_battery: Use scaled iio_read_channel
power: supply: axp20x_usb_power: Use scaled iio_read_channel
power: supply: generic-adc-battery: change my gmail
power: supply: pmu_battery: Set power supply type to BATTERY
power: Switch back to struct platform_driver::remove()
power: supply: hwmon: move interface to private header
power: supply: rk817: Update battery capacity calibration
power: supply: rk817: stop updating info in suspend
power: supply: rt9471: Use IC status regfield to report real charger status
power: supply: rt9471: Fix wrong WDT function regfield declaration
dt-bindings: power/supply: qcom,pmi8998-charger: Drop incorrect "#interrupt-cells" from example
power: supply: core: mark attribute arrays as ro_after_init
power: supply: core: unexport power_supply_property_is_writeable()
power: supply: core: use device mutex wrappers
power: supply: bq27xxx: Fix registers of bq27426
...
Fixed:
additional checks have been added to address issues identified by syzbot.
Refactored:
continuation of the transition from 'page' to 'folio'.
-----BEGIN PGP SIGNATURE-----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=xhIC
-----END PGP SIGNATURE-----
Merge tag 'ntfs3_for_6.13' of https://github.com/Paragon-Software-Group/linux-ntfs3
Pull ntfs3 updates from Konstantin Komarov:
- additional checks to address issues identified by syzbot
- continuation of the transition from 'page' to 'folio'
* tag 'ntfs3_for_6.13' of https://github.com/Paragon-Software-Group/linux-ntfs3:
fs/ntfs3: Accumulated refactoring changes
fs/ntfs3: Switch to folio to release resources
fs/ntfs3: Add check in ntfs_extend_initialized_size
fs/ntfs3: Add more checks in mi_enum_attr (part 2)
fs/ntfs3: Equivalent transition from page to folio
fs/ntfs3: Fix case when unmarked clusters intersect with zone
fs/ntfs3: Fix warning in ni_fiemap
- Handle it as the empty directory if the start cluster of stream entry
is invalid.
- Valid size of steam entry cannot be greater than data size.
If valid_size is invalid, Deal with data_size.
- Move Direct-IO alignment check to before extending the valid size.
- Fix uninit-value issue reported by syzbot.
- Optimize to find directory entry-set in write_inode, rename, unlink.
-----BEGIN PGP SIGNATURE-----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=1uEv
-----END PGP SIGNATURE-----
Merge tag 'exfat-for-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat
Pull exfat updates from Namjae Jeon:
- If the start cluster of stream entry is invalid, treat it as the
empty directory
- Valid size of steam entry cannot be greater than data size. If
valid_size is invalid, use data_size
- Move Direct-IO alignment check to before extending the valid size
- Fix uninit-value issue reported by syzbot
- Optimize finding directory entry-set in write_inode, rename, unlink
* tag 'exfat-for-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat:
exfat: reduce FAT chain traversal
exfat: code cleanup for exfat_readdir()
exfat: remove argument 'p_dir' from exfat_add_entry()
exfat: move exfat_chain_set() out of __exfat_resolve_path()
exfat: add exfat_get_dentry_set_by_ei() helper
exfat: rename argument name for exfat_move_file and exfat_rename_file
exfat: remove unnecessary read entry in __exfat_rename()
exfat: fix file being changed by unaligned direct write
exfat: fix uninit-value in __exfat_get_dentry_set
exfat: fix out-of-bounds access of directory entries
Fix typos and grammar where it improves readability.
Signed-off-by: Leo Stone <leocstone@gmail.com>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Link: https://patch.msgid.link/20241124230002.56058-1-leocstone@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Paolo Abeni says:
====================
net: fix mcast RCU splats
This series addresses the RCU splat triggered by the forwarding
mroute tests.
The first patch does not address any specific issue, but makes the
following ones more clear. Patch 2 and 3 address the issue for ipv6 and
ipv4 respectively.
====================
Link: https://patch.msgid.link/cover.1732289799.git.pabeni@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Similar to the previous patch, plumb the RCU lock inside
the ipmr_get_table(), provided a lockless variant and apply
the latter in the few spots were the lock is already held.
Fixes: 709b46e8d9 ("net: Add compat ioctl support for the ipv4 multicast ioctl SIOCGETSGCNT")
Fixes: f0ad0860d0 ("ipv4: ipmr: support multiple tables")
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Several places call ip6mr_get_table() with no RCU nor RTNL lock.
Add RCU protection inside such helper and provide a lockless variant
for the few callers that already acquired the relevant lock.
Note that some users additionally reference the table outside the RCU
lock. That is actually safe as the table deletion can happen only
after all table accesses are completed.
Fixes: e2d57766e6 ("net: Provide compat support for SIOCGETMIFCNT_IN6 and SIOCGETSGCNT_IN6.")
Fixes: d7c31cbde4 ("net: ip6mr: add RTM_GETROUTE netlink op")
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The multicast route tables lifecycle, for both ipv4 and ipv6, is
protected by RCU using the RTNL lock for write access. In many
places a table pointer escapes the RCU (or RTNL) protected critical
section, but such scenarios are actually safe because tables are
deleted only at namespace cleanup time or just after allocation, in
case of default rule creation failure.
Tables freed at namespace cleanup time are assured to be alive for the
whole netns lifetime; tables freed just after creation time are never
exposed to other possible users.
Ensure that the free conditions are respected in ip{,6}mr_free_table, to
document the locking schema and to prevent future possible introduction
of 'table del' operation from breaking it.
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Recent kernels cause a lot of TCP retransmissions
[ ID] Interval Transfer Bitrate Retr Cwnd
[ 5] 0.00-1.00 sec 2.24 GBytes 19.2 Gbits/sec 2767 442 KBytes
[ 5] 1.00-2.00 sec 2.23 GBytes 19.1 Gbits/sec 2312 350 KBytes
^^^^
Replacing the qdisc with pfifo makes retransmissions go away.
It appears that a flow may have a delayed packet with a very near
Tx time. Later, we may get busy processing Rx and the target Tx time
will pass, but we won't service Tx since the CPU is busy with Rx.
If Rx sees an ACK and we try to push more data for the delayed flow
we may fastpath the skb, not realizing that there are already "ready
to send" packets for this flow sitting in the qdisc.
Don't trust the fastpath if we are "behind" according to the projected
Tx time for next flow waiting in the Qdisc. Because we consider anything
within the offload window to be okay for fastpath we must consider
the entire offload window as "now".
Qdisc config:
qdisc fq 8001: dev eth0 parent 1234:1 limit 10000p flow_limit 100p \
buckets 32768 orphan_mask 1023 bands 3 \
priomap 1 2 2 2 1 2 0 0 1 1 1 1 1 1 1 1 \
weights 589824 196608 65536 quantum 3028b initial_quantum 15140b \
low_rate_threshold 550Kbit \
refill_delay 40ms timer_slack 10us horizon 10s horizon_drop
For iperf this change seems to do fine, the reordering is gone.
The fastpath still gets used most of the time:
gc 0 highprio 0 fastpath 142614 throttled 418309 latency 19.1us
xx_behind 2731
where "xx_behind" counts how many times we hit the new "return false".
CC: stable@vger.kernel.org
Fixes: 076433bd78 ("net_sched: sch_fq: add fast path for mostly idle qdisc")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241124022148.3126719-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The cited commit replaced inet_csk_reqsk_queue_drop_and_put() with
__inet_csk_reqsk_queue_drop() and reqsk_put() in reqsk_timer_handler().
Then, oreq should be passed to reqsk_put() instead of req; otherwise
use-after-free of nreq could happen when reqsk is migrated but the
retry attempt failed (e.g. due to timeout).
Let's pass oreq to reqsk_put().
Fixes: e8c526f2bd ("tcp/dccp: Don't use timer_pending() in reqsk_queue_unlink().")
Reported-by: Liu Jian <liujian56@huawei.com>
Closes: https://lore.kernel.org/netdev/1284490f-9525-42ee-b7b8-ccadf6606f6d@huawei.com/
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Liu Jian <liujian56@huawei.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20241123174236.62438-1-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When phy_ethtool_set_eee_noneg() detects a change in the LPI
parameters, it attempts to update phylib state and trigger the link
to cycle so the MAC sees the updated parameters.
However, in doing so, it sets phydev->enable_tx_lpi depending on
whether the EEE configuration allows the MAC to generate LPI without
taking into account the result of negotiation.
This can be demonstrated with a 1000base-T FD interface by:
# ethtool --set-eee eno0 advertise 8 # cause EEE to be not negotiated
# ethtool --set-eee eno0 tx-lpi off
# ethtool --set-eee eno0 tx-lpi on
This results in being true, despite EEE not having been negotiated and:
# ethtool --show-eee eno0
EEE status: enabled - inactive
Tx LPI: 250 (us)
Supported EEE link modes: 100baseT/Full
1000baseT/Full
Advertised EEE link modes: 100baseT/Full
1000baseT/Full
Fix this by keeping track of whether EEE was negotiated via a new
eee_active member in struct phy_device, and include this state in
the decision whether phydev->enable_tx_lpi should be set.
Fixes: 3e43b903da ("net: phy: Immediately call adjust_link if only tx_lpi_enabled changes")
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tErSe-005RhB-2R@rmk-PC.armlinux.org.uk
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Michal Luczaj says:
====================
net: Fix some callers of copy_from_sockptr()
Some callers misinterpret copy_from_sockptr()'s return value. The function
follows copy_from_user(), i.e. returns 0 for success, or the number of
bytes not copied on error. Simply returning the result in a non-zero case
isn't usually what was intended.
Compile tested with CONFIG_LLC, CONFIG_AF_RXRPC, CONFIG_BT enabled.
Last patch probably belongs more to net-next, if any. Here as an RFC.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
====================
Link: https://patch.msgid.link/20241119-sockptr-copy-fixes-v3-0-d752cac4be8e@rbox.co
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
copy_from_sockptr() has a history of misuse. Add a comment explaining that
the function follows API of copy_from_user(), i.e. returns 0 for success,
or number of bytes not copied on error.
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
copy_from_sockptr() does not return negative value on error; instead, it
reports the number of bytes that failed to copy. Since it's deprecated,
switch to copy_safe_from_sockptr().
Note: Keeping the `optlen != sizeof(unsigned int)` check as
copy_safe_from_sockptr() by itself would also accept
optlen > sizeof(unsigned int). Which would allow a more lenient handling
of inputs.
Fixes: 17926a7932 ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both")
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
copy_from_sockptr() is used incorrectly: return value is the number of
bytes that could not be copied. Since it's deprecated, switch to
copy_safe_from_sockptr().
Note: Keeping the `optlen != sizeof(int)` check as copy_safe_from_sockptr()
by itself would also accept optlen > sizeof(int). Which would allow a more
lenient handling of inputs.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Suggested-by: David Wei <dw@davidwei.uk>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
- Introduce acpi_arch_init() for architecture-specific ACPI subsystem
initialization (Miao Wang).
- Clean up Asus quirks in acpi_quirk_skip_dmi_ids[] and add a quirk
to skip I2C clients on Acer Iconia One 8 A1-840 (Hans de Goede).
- Make the ACPI processor_idle driver use acpi_idle_play_dead() for
all idle states regardless of their types (Rafael Wysocki).
-----BEGIN PGP SIGNATURE-----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=yL7H
-----END PGP SIGNATURE-----
Merge tag 'acpi-6.13-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more ACPI updates from Rafael Wysocki:
"These add a common init function for arch-specific ACPI
initialization, clean up idle states initialization in the ACPI
processor_idle driver and update quirks:
- Introduce acpi_arch_init() for architecture-specific ACPI subsystem
initialization (Miao Wang)
- Clean up Asus quirks in acpi_quirk_skip_dmi_ids[] and add a quirk
to skip I2C clients on Acer Iconia One 8 A1-840 (Hans de Goede)
- Make the ACPI processor_idle driver use acpi_idle_play_dead() for
all idle states regardless of their types (Rafael Wysocki)"
* tag 'acpi-6.13-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: introduce acpi_arch_init()
ACPI: x86: Clean up Asus entries in acpi_quirk_skip_dmi_ids[]
ACPI: x86: Add skip i2c clients quirk for Acer Iconia One 8 A1-840
ACPI: processor_idle: Use acpi_idle_play_dead() for all C-states
Update the OPP (Operating Performance Points) DT bindings for
ti-cpu (Dhruva Gole) and remove unused declarations from the
OPP header file (Zhang Zekun).
-----BEGIN PGP SIGNATURE-----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=9/iX
-----END PGP SIGNATURE-----
Merge tag 'pm-6.13-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull morepower management updates from Rafael Wysocki:
"These update the OPP (Operating Performance Points) DT bindings for
ti-cpu (Dhruva Gole) and remove unused declarations from the OPP
header file (Zhang Zekun)"
* tag 'pm-6.13-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
dt-bindings: opp: operating-points-v2-ti-cpu: Describe opp-supported-hw
OPP: Remove unused declarations in header file
- Add a NULL pointer check that was missed by recent modifications of
the Power Allocator thermal governor (Rafael Wysocki).
- Remove the data_vault attribute_group from int3400 because it is only
used for exposing one binary file that can be exposed directly (Thomas
Weißschuh).
- Prevent the current_uuid sysfs attribute in int3400 from mistakenly
treating valid UUID values as invalid on some older systems (Srinivas
Pandruvada).
- Use the cleanup.h mechanics to simplify DT data parsing in the thermal
core and some drivers (Krzysztof Kozlowski).
-----BEGIN PGP SIGNATURE-----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=9Wp9
-----END PGP SIGNATURE-----
Merge tag 'thermal-6.13-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more thermal control updates from Rafael Wysocki:
"These fix a Power Allocator thermal governor issue reported recently,
update the Intel int3400 thermal driver and simplify DT data parsing
in the thermal control subsystem:
- Add a NULL pointer check that was missed by recent modifications of
the Power Allocator thermal governor (Rafael Wysocki)
- Remove the data_vault attribute_group from int3400 because it is
only used for exposing one binary file that can be exposed directly
(Thomas Weißschuh)
- Prevent the current_uuid sysfs attribute in int3400 from mistakenly
treating valid UUID values as invalid on some older systems
(Srinivas Pandruvada)
- Use the cleanup.h mechanics to simplify DT data parsing in the
thermal core and some drivers (Krzysztof Kozlowski)"
* tag 'thermal-6.13-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: sun8i: Use scoped device node handling to simplify error paths
thermal: tegra: Simplify with scoped for each OF child loop
thermal: qcom-spmi-adc-tm5: Simplify with scoped for each OF child loop
thermal: of: Use scoped device node handling to simplify of_thermal_zone_find()
thermal: of: Use scoped memory and OF handling to simplify thermal_of_trips_init()
thermal: of: Simplify thermal_of_should_bind with scoped for each OF child
thermal: gov_power_allocator: Add missing NULL pointer check
thermal: int3400: Remove unneeded data_vault attribute_group
thermal: int3400: Fix reading of current_uuid for active policy
Change the driver callback op domain_alloc_user() into two ops
domain_alloc_paging_flags() and domain_alloc_nesting() that better
describe what the ops are expected to do. There will be per-driver cleanup
based on this going into the next cycle via the driver trees.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCZ0c+GQAKCRCFwuHvBreF
YVJXAP97zriu5x9AVNzG6mLOOYYROuhCTXGieKPqNg/apGOyogD/cMuMql3w86h+
oBIMai6GaTBUU+Ie8S07PM0849TpLgA=
=yyYk
-----END PGP SIGNATURE-----
Merge tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull more iommufd updates from Jason Gunthorpe:
"Change the driver callback op domain_alloc_user() into two ops:
domain_alloc_paging_flags() and domain_alloc_nesting() that better
describe what the ops are expected to do.
There will be per-driver cleanup based on this going into the next
cycle via the driver trees"
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
iommu: Rename ops->domain_alloc_user() to domain_alloc_paging_flags()
iommu: Add ops->domain_alloc_nested()
- structure optimization of few bus structures and header updates
- support for 2.0 disco spec
- amd driver updates for acp revision, refactoring code and support for
acp6.3
- soft reset support for cadence driver
-----BEGIN PGP SIGNATURE-----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=3Ob7
-----END PGP SIGNATURE-----
Merge tag 'soundwire-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire
Pull soundwire updates from Vinod Koul:
- structure optimization of few bus structures and header updates
- support for 2.0 disco spec
- amd driver updates for acp revision, refactoring code and support for
acp6.3
- soft reset support for cadence driver
* tag 'soundwire-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: (24 commits)
soundwire: Minor formatting fixups in sdw.h header
soundwire: Update the includes on the sdw.h header
soundwire: cadence: clear MCP BLOCK_WAKEUP in init
soundwire: cadence: add soft-reset on startup
soundwire: intel_auxdevice: add kernel parameter for mclk divider
soundwire: mipi-disco: add support for DP0/DPn 'lane-list' property
soundwire: mipi-disco: add new properties from 2.0 spec
soundwire: mipi-disco: add comment on DP0-supported property
soundwire: mipi-disco: add support for peripheral channelprepare timeout
soundwire: mipi_disco: add support for clock-scales property
soundwire: mipi-disco: add error handling for property array read
soundwire: mipi-disco: remove DPn audio-modes
soundwire: optimize sdw_dpn_prop
soundwire: optimize sdw_dp0_prop
soundwire: optimize sdw_slave_prop
soundwire: optimize sdw_bus structure
soundwire: optimize sdw_master_prop
soundwire: optimize sdw_stream_runtime memory layout
soundwire: mipi_disco: add MIPI-specific property_read_bool() helpers
soundwire: Correct some typos in comments
...
- New Support
- ST STM32MP25 combophy support
- Sparx5 support for lan969x serdes and updates to driver to support this
- NXP PTN3222 eUSB2 to USB2 redriver
- Qualcomm SAR2130P eusb2 support, QCS8300 USB DW3 and QMP USB2 support,
X1E80100 QMP PCIe PHY Gen4 support, QCS615 and QCS8300 QMP UFS PHY
support and SA8775P eDP PHY support
- Rockchip rk3576 usbdp and rk3576 usb2 phy support
- Binding for Microchip ATA6561 can phy
- Updates
- Freescale driver updates from hdmi support
- Conversion of rockchip rk3228 hdmi phy binding to yaml
- Broadcom usb2-phy deprecated support dropped and USB init array update
for BCM4908
- TI USXGMII mode support in J7200
- Switch back to platform_driver::remove() subsystem update
-----BEGIN PGP SIGNATURE-----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=5o8/
-----END PGP SIGNATURE-----
Merge tag 'phy-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy updates from Vinod Koul:
"New hardware support:
- ST STM32MP25 combophy support
- Sparx5 support for lan969x serdes and updates to driver to support
this
- NXP PTN3222 eUSB2 to USB2 redriver
- Qualcomm SAR2130P eusb2 support, QCS8300 USB DW3 and QMP USB2
support, X1E80100 QMP PCIe PHY Gen4 support, QCS615 and QCS8300 QMP
UFS PHY support and SA8775P eDP PHY support
- Rockchip rk3576 usbdp and rk3576 usb2 phy support
- Binding for Microchip ATA6561 can phy
Updates:
- Freescale driver updates from hdmi support
- Conversion of rockchip rk3228 hdmi phy binding to yaml
- Broadcom usb2-phy deprecated support dropped and USB init array
update for BCM4908
- TI USXGMII mode support in J7200
- Switch back to platform_driver::remove() subsystem update"
* tag 'phy-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (59 commits)
phy: qcom: qmp: Fix lecacy-legacy typo
phy: lan969x-serdes: add support for lan969x serdes driver
dt-bindings: phy: sparx5: document lan969x
phy: sparx5-serdes: add support for branching on chip type
phy: sparx5-serdes: add indirection layer to register macros
phy: sparx5-serdes: add function for getting the CMU index
phy: sparx5-serdes: add ops to match data
phy: sparx5-serdes: add constant for the number of CMU's
phy: sparx5-serdes: add constants to match data
phy: sparx5-serdes: add support for private match data
phy: bcm-ns-usb2: drop support for old binding variant
dt-bindings: phy: bcm-ns-usb2-phy: drop deprecated variant
dt-bindings: phy: Add QMP UFS PHY compatible for QCS8300
dt-bindings: phy: qcom: snps-eusb2: Add SAR2130P compatible
dt-bindings: phy: ti,tcan104x-can: Document Microchip ATA6561
phy: airoha: Fix REG_CSR_2L_RX{0,1}_REV0 definitions
phy: airoha: Fix REG_CSR_2L_JCPLL_SDM_HREN config in airoha_pcie_phy_init_ssc_jcpll()
phy: airoha: Fix REG_PCIE_PMA_TX_RESET config in airoha_pcie_phy_init_csr_2l()
phy: airoha: Fix REG_CSR_2L_PLL_CMN_RESERVE0 config in airoha_pcie_phy_init_clk_out()
phy: phy-rockchip-samsung-hdptx: Don't request RST_PHY/RST_ROPLL/RST_LCPLL
...
- fix missing GPIO chip labels in gpio-zevio and gpio-altera
- for the latter: also set GPIO base to -1 to use dynamic range
allocation
- fix value setting with external pull-up/down resistor in gpio-exar
- use the recommended IDA interfaces in gpio-mpsse
-----BEGIN PGP SIGNATURE-----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=ILxF
-----END PGP SIGNATURE-----
Merge tag 'gpio-fixes-for-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
"Apart from the gpio-exar fix which addresses an older issue, they all
fix regressions from this release cycle:
- fix missing GPIO chip labels in gpio-zevio and gpio-altera
- for the latter: also set GPIO base to -1 to use dynamic range
allocation
- fix value setting with external pull-up/down resistor in gpio-exar
- use the recommended IDA interfaces in gpio-mpsse"
* tag 'gpio-fixes-for-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: mpsse: Remove usage of the deprecated ida_simple_xx() API
gpio: exar: set value when external pull-up or pull-down is present
gpio: altera: Add missed base and label initialisations
gpio: zevio: Add missed label initialisation
A small number of improvements all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmdGPb8PHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpPowH/3Fc6uWqgMRiHgBP6BMlmAYRhhovlBF70Cug
SN1dQuV9aVRYC4rqUoYb3F7X4Szn9fpPiGuwDywmI5jcSNMbsQlCxwrymcVXKxuO
sZRGBtIYvzHbZzYjp380WHuglCZ+cIfQxLV6fI2ly4oN8LybKwXSxrTQ1uu/CSZ5
vLiyAAJ7J9bKvrMjKg9vXTzK5/jzf7fKhB9NnQb4/JbsVcEoJdNkCxm/cV4wyVa+
RateZBDgy6YUULKKei4MuaBGHX3pHhxlyrE9aas3E74ijIz+H8tOBz6mgcI939z7
xfdqGRGUnZrC7t8ZjWs9CCCu1jR18hXNMZXcCuDMdyghQib5D7o=
=GzUl
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
"A small number of improvements all over the place"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
virtio_vdpa: remove redundant check on desc
virtio_fs: store actual queue index in mq_map
virtio_fs: add informative log for new tag discovery
virtio: Make vring_new_virtqueue support packed vring
virtio_pmem: Add freeze/restore callbacks
vdpa/mlx5: Fix suboptimal range on iotlb iteration
- Constify an unmodified structure used in linking vfio and kvm.
(Christophe JAILLET)
- Add ID for an additional hardware SKU supported by the nvgrace-gpu
vfio-pci variant driver. (Ankit Agrawal)
- Fix incorrect signed cast in QAT vfio-pci variant driver, negating
test in check_add_overflow(), though still caught by later tests.
(Giovanni Cabiddu)
- Additional debugfs attributes exposed in hisi_acc vfio-pci variant
driver for migration debugging. (Longfang Liu)
- Migration support is added to the virtio vfio-pci variant driver,
becoming the primary feature of the driver while retaining emulation
of virtio legacy support as a secondary option. (Yishai Hadas)
- Fixes to a few unwind flows in the mlx5 vfio-pci driver discovered
through reviews of the virtio variant driver. (Yishai Hadas)
- Fix an unlikely issue where a PCI device exposed to userspace with
an unknown capability at the base of the extended capability chain
can overflow an array index. (Avihai Horon)
-----BEGIN PGP SIGNATURE-----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=nTtY
-----END PGP SIGNATURE-----
Merge tag 'vfio-v6.13-rc1' of https://github.com/awilliam/linux-vfio
Pull VFIO updates from Alex Williamson:
- Constify an unmodified structure used in linking vfio and kvm
(Christophe JAILLET)
- Add ID for an additional hardware SKU supported by the nvgrace-gpu
vfio-pci variant driver (Ankit Agrawal)
- Fix incorrect signed cast in QAT vfio-pci variant driver, negating
test in check_add_overflow(), though still caught by later tests
(Giovanni Cabiddu)
- Additional debugfs attributes exposed in hisi_acc vfio-pci variant
driver for migration debugging (Longfang Liu)
- Migration support is added to the virtio vfio-pci variant driver,
becoming the primary feature of the driver while retaining emulation
of virtio legacy support as a secondary option (Yishai Hadas)
- Fixes to a few unwind flows in the mlx5 vfio-pci driver discovered
through reviews of the virtio variant driver (Yishai Hadas)
- Fix an unlikely issue where a PCI device exposed to userspace with an
unknown capability at the base of the extended capability chain can
overflow an array index (Avihai Horon)
* tag 'vfio-v6.13-rc1' of https://github.com/awilliam/linux-vfio:
vfio/pci: Properly hide first-in-list PCIe extended capability
vfio/mlx5: Fix unwind flows in mlx5vf_pci_save/resume_device_data()
vfio/mlx5: Fix an unwind issue in mlx5vf_add_migration_pages()
vfio/virtio: Enable live migration once VIRTIO_PCI was configured
vfio/virtio: Add PRE_COPY support for live migration
vfio/virtio: Add support for the basic live migration functionality
virtio-pci: Introduce APIs to execute device parts admin commands
virtio: Manage device and driver capabilities via the admin commands
virtio: Extend the admin command to include the result size
virtio_pci: Introduce device parts access commands
Documentation: add debugfs description for hisi migration
hisi_acc_vfio_pci: register debugfs for hisilicon migration driver
hisi_acc_vfio_pci: create subfunction for data reading
hisi_acc_vfio_pci: extract public functions for container_of
vfio/qat: fix overflow check in qat_vf_resume_write()
vfio/nvgrace-gpu: Add a new GH200 SKU to the devid table
kvm/vfio: Constify struct kvm_device_ops
