Commit graph

336,024 commits

Author SHA1 Message Date
Greg Kroah-Hartman
d867c43e24 USB: ksdazzle-sir.c: remove err() usage
err() was a very old USB-specific macro that I thought had
gone away.  This patch removes it from being used in the
driver and uses dev_err() instead.

CC: Samuel Ortiz <samuel@sortiz.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-25 14:48:51 -07:00
Greg Kroah-Hartman
32279240ab USB: ks959-sir.c: remove err() usage
err() was a very old USB-specific macro that I thought had
gone away.  This patch removes it from being used in the
driver and uses dev_err() instead.

CC: Samuel Ortiz <samuel@sortiz.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-25 14:48:50 -07:00
Greg Kroah-Hartman
6f0d27ff97 USB: kingsun-sir.c: remove err() usage
err() was a very old USB-specific macro that I thought had
gone away.  This patch removes it from being used in the
driver and uses dev_err() instead.

CC: Samuel Ortiz <samuel@sortiz.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-25 14:48:50 -07:00
Greg Kroah-Hartman
3d55ea3e22 USB: irda-usb.c: remove err() usage
err() was a very old USB-specific macro that I thought had
gone away.  This patch removes it from being used in the
driver and uses dev_err() instead.

CC: Samuel Ortiz <samuel@sortiz.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-25 14:48:49 -07:00
Greg Kroah-Hartman
d372c4197d USB: hdpvr-core.c: remove err() usage
err() was a very old USB-specific macro that I thought had
gone away.  This patch removes it from being used in the
driver and uses dev_err() instead.

CC: Mauro Carvalho Chehab <mchehab@infradead.org>
CC: Jarod Wilson <jarod@redhat.com>
CC: Taylor Ralph <tralph@mythtv.org>
CC: Andrew Morton <akpm@linux-foundation.org>
CC: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-25 14:48:49 -07:00
Greg Kroah-Hartman
a581c72a8e USB: ov534_9.c: remove err() usage
err() was a very old USB-specific macro that I thought had
gone away.  This patch removes it from being used in the
driver and uses dev_err() instead.

CC: Jean-Francois Moine <moinejf@free.fr>
CC: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-25 14:48:47 -07:00
Greg Kroah-Hartman
e27ad0fe9c USB: usbtouchscreen.c: remove err() usage
err() was a very old USB-specific macro that I thought had
gone away.  This patch removes it from being used in the
driver and uses dev_err() instead.

CC: Dmitry Torokhov <dmitry.torokhov@gmail.com>
CC: Henrik Rydberg <rydberg@euromail.se>
CC: Rusty Russell <rusty@rustcorp.com.au>
CC: Viresh Kumar <viresh.kumar@st.com>
CC: Armando Visconti <armando.visconti@st.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-25 14:48:46 -07:00
Greg Kroah-Hartman
b3169fecb1 USB: wacom_sys.c: remove err() usage
err() was a very old USB-specific macro that I thought had
gone away.  This patch removes it from being used in the
driver and uses dev_err() instead.

CC: Dmitry Torokhov <dmitry.torokhov@gmail.com>
CC: Ping Cheng <pingc@wacom.com>
CC: Chris Bagwell <chris@cnpbagwell.com>
CC: Eduard Hasenleithner <eduard@hasenleithner.at>
CC: Jason Gerecke <killertofu@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-25 14:48:44 -07:00
Greg Kroah-Hartman
202712c232 USB: kbtab.c: remove err() usage
err() was a very old USB-specific macro that I thought had
gone away.  This patch removes it from being used in the
driver and uses dev_err() instead.

CC: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-25 14:48:41 -07:00
Greg Kroah-Hartman
3bd9597a6b USB: gtco.c: remove err() usage
err() was a very old USB-specific macro that I thought had
gone away.  This patch removes it from being used in the
driver and uses dev_err() instead.

CC: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-25 14:48:39 -07:00
Greg Kroah-Hartman
1f80bb943d USB: aiptek.c: remove err() usage
err() was a very old USB-specific macro that I thought had
gone away.  This patch removes it from being used in the
driver and uses dev_err() instead.

CC: Dmitry Torokhov <dmitry.torokhov@gmail.com>
CC: Jesper Juhl <jj@chaosbits.net>
CC: JJ Ding <dgdunix@gmail.com>
CC: Edwin van Vliet <edwin@cheatah.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-25 14:48:36 -07:00
Greg Kroah-Hartman
b59c82bd6f USB: acecad.c: remove err() usage
err() was a very old USB-specific macro that I thought had
gone away.  This patch removes it from being used in the
driver and uses dev_err() instead.

CC: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-25 14:48:34 -07:00
Greg Kroah-Hartman
6c1d1b2461 USB: bcm5974.c: remove err() usage
err() was a very old USB-specific macro that I thought had
gone away.  This patch removes it from being used in the
driver and uses dev_err() instead.

CC: Henrik Rydberg <rydberg@euromail.se>
CC: Alessandro Rubini <rubini@ipvvis.unipv.it>
CC: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-25 14:48:31 -07:00
Greg Kroah-Hartman
9c113dc67a USB: appletouch.c: remove err() usage
err() was a very old USB-specific macro that I thought had
gone away.  This patch removes it from being used in the
driver and uses dev_err() instead.

CC: Alessandro Rubini <rubini@ipvvis.unipv.it>
CC: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-25 14:48:31 -07:00
Greg Kroah-Hartman
08813d35d2 USB: yealink.c: remove err() usage
err() was a very old USB-specific macro that I thought had
gone away.  This patch removes it from being used in the
driver and uses dev_err() instead.

CC: Henk Vergonet <Henk.Vergonet@gmail.com>
CC: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-25 14:48:31 -07:00
Greg Kroah-Hartman
2385f3c3c7 USB: powermate.c: remove err() usage
err() was a very old USB-specific macro that I thought had
gone away.  This patch removes it from being used in the
driver and uses dev_err() instead.

CC: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-25 14:48:30 -07:00
Greg Kroah-Hartman
4efeca581b USB: keyspan_remote.c: remove err() usage
err() was a very old USB-specific macro that I thought had
gone away.  This patch removes it from being used in the
driver and uses dev_err() instead.

CC: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-25 14:48:28 -07:00
Greg Kroah-Hartman
3f37d8e8e1 USB: cm109.c: remove err() usage
err() was a very old USB-specific macro that I thought had
gone away.  This patch removes it from being used in the
driver and uses dev_err() instead.

CC: Dmitry Torokhov <dmitry.torokhov@gmail.com>
CC: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-25 14:48:25 -07:00
Greg Kroah-Hartman
9cb757bfac USB: xpad.c: remove err() usage
err() was a very old USB-specific macro that I thought had
gone away.  This patch removes it from being used in the
driver and uses dev_err() instead.

CC: Dmitry Torokhov <dmitry.torokhov@gmail.com>
CC: "Magnus Hörlin" <magnus@alefors.se>
CC: Rusty Russell <rusty@rustcorp.com.au>
CC: Mauro Carvalho Chehab <mchehab@redhat.com>
CC: Chris Moeller <kode54@gmail.c>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-25 14:48:23 -07:00
Greg Kroah-Hartman
185a85518a USB: usbmouse.c: remove err() usage
err() was a very old USB-specific macro that I thought had
gone away.  This patch removes it from being used in the
driver and uses dev_err() instead.

CC: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-25 14:48:20 -07:00
Greg Kroah-Hartman
7b22a8855a USB: iforce: remove err() usage
err() was a very old USB-specific macro that I thought had gone away.
This patch removes it from being used in the driver and uses dev_err()
instead.

Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-25 14:34:49 -07:00
Greg Kroah-Hartman
9451df0ee8 USB: staging: media: as102: convert to use module_usb_driver
The as102 driver can be converted to use module_usb_driver() which saves
a lot of code, and gets rid of an unwanted err() call at the same time.

Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Cc: Sylwester Nawrocki <snjw23@gmail.com>
Cc: Piotr Chmura <chmooreck@poczta.onet.pl>
Cc: Devin Heitmueller <dheitmueller@kernellabs.com>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-25 14:33:06 -07:00
Stephen Warren
aea812e1ac ARM: tegra: add pll_x freq table entry for 750MHz
Some SKUs limit the maximum CPU frequency to 750MHz; see
tegra2_pllx_clk_init(). The pll_x frequency table needs an entry for this
frequency, or there will be continual log spam from the cpufreq driver
attempting to set this rate, yet there being no table entry for it.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-04-25 15:23:14 -06:00
Stephen Warren
563da21b1d ARM: dt: tegra: pinmux changes for USB ULPI
Ensure that the USB ULPI signals are not tri-stated, and have no pull-
up or pull-down.

Ensure that the pingroup hosting the USB ULPI reset signal (GPIO PV0 or
PV1 depending on the board, so UAC) is not tri-stated, and has no pull-
up or pull-down.

This change appears larger than it is due to the grouping and sorting of
the pin configuration data.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-04-25 15:22:10 -06:00
Stephen Warren
aa607ebf93 ARM: tegra: add USB ULPI PHY reset GPIO to device tree
ULPI PHYs have a reset signal, and different boards use a different GPIO
for this task. Add a property to device tree to represent this.

I'm not sure if adding this property to the EHCI controller node is
entirely correct; perhaps eventually we should have explicit separate
nodes for the various PHYs. However, we don't have that right now, so this
binding seems like a reasonable choice.

Cc: <devicetree-discuss@lists.ozlabs.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: <linux-usb@vger.kernel.org>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-04-25 15:22:09 -06:00
Stephen Warren
60d148b9f8 ARM: tegra: don't hard-code USB ULPI PHY reset_gpio
Not all boards use GPIO_PV0 as the ULPI PHY reset signal. Instead of
hard-coding this GPIO into devices.c, make the board files set it
explicitly. This will allow the PHY code to differentiate between set and
unset values, and hence know when to read the value from device tree.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-04-25 15:22:09 -06:00
Stephen Warren
9abafa021e ARM: tegra: change pll_p_out4's rate to 24MHz
pll_p_out4 is used on all/most Tegra boards to drive the cdev2 output pin
to provide a reference clock to a ULPI USB PHY. This reference clock must
run at 24MHz, and the cdev2 output has no additional dividers.

Remove board-paz00.c's now-duplicate initialization of this clock.

Reported-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-04-25 15:22:09 -06:00
Stephen Warren
7ff4db0967 ARM: tegra: fix pclk rate
Commit 40f9cf0 "ARM: tegra: reparent sclk to pll_c_out1" changed the
rate of hclk. Since pclk is derived from that, and only has integer
dividers, the pclk rate needs to change in the same fashion, from 54MHz
to 60MHz.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-04-25 15:22:09 -06:00
Stephen Warren
60f975b98c ARM: tegra: reparent sclk to pll_c_out1
pll_p_out4 needs to be used for other purposes. Reparent sclk so that
it runs from pll_c. Change sclk's rate to 120MHz from 108MHz since this
is the lowest precise rate that can be achieved by dividing the pll_c
rate without reducing the sclk rate. (600/5=120, 600/5.5=109.0909...,
600/6=100).

Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-04-25 15:22:09 -06:00
Allen Martin
c8b62ab41f ARM: tegra: Add pllc clock init table
pll_c will be used as a clock source. Fill in tegra_pll_c_freq_table[]
so that it's possible to explicitly initialize the PLL.

NVIDIA's downstream nv-3.1 kernel and the ChromeOS kernel have different
pll_c tables. nv-3.1 contains entries for 522MHz and 598MHz output,
whereas the ChromeOS kernel contains entries for 600MHz output. I chose
to upstream the ChromeOS values for now, since the 600MHz rate appears
to match the default rate of this PLL when the HW boots, and it's not
clear to me why 522 or 598MHz are more useful.

Signed-off-by: Allen Martin <amartin@nvidia.com>
Signed-off-by: Olof Johansson <olofj@chromium.org>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
[swarren: wrote commit description]
2012-04-25 15:22:09 -06:00
Stephen Warren
8c6a3852f6 ARM: dt: tegra cardhu: basic audio support
Add WM8903 codec nodes, and top-level sound complex node for basic
analog audio over headset jack and internal speakers.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Olof Johansson <olof@lixom.net>
2012-04-25 15:22:01 -06:00
Stephen Warren
9ee6a5c4f4 ARM: dt: tegra30.dtsi: Add audio-related nodes
Add nodes for the Tegra30 AHUB and I2S controllers.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Olof Johansson <olof@lixom.net>
2012-04-25 15:22:01 -06:00
Stephen Warren
5657d98dea ARM: tegra: add AUXDATA required for audio
Both the Tegra30 I2S and AHUB modules used clocks, and hence currently
require AUXDATA in order to get specific device names so that clock
lookups work.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Olof Johansson <olof@lixom.net>
2012-04-25 15:22:01 -06:00
Stephen Warren
18b81fb733 ARM: tegra: set up audio clocks for tegra30 dt
Set up the audio clock tree for Tegra30 in an equivalent fashion to the
existing setup for Tegra20.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Olof Johansson <olof@lixom.net>
2012-04-25 15:22:01 -06:00
Peter De Schrijver
6437626928 ARM: tegra: Initialize pll_p_out1
pll_a uses pll_p_out1 as its parent. Therefore this clock needs to be
initialized to make sure pll_a has a known input clock. Failure to do so
will cause the system to crash early in the bootup.

Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-04-25 15:22:01 -06:00
Stephen Warren
8703612b0a ARM: tegra: provide clock aliases for AHUB configlink
The Tegra30 AHUB driver must call tegra_periph_reset_deassert() for all
devices on the AHUB's configlink bus. The AHUB driver must be able to
call clk_get_sys() to retrieve the clock parameter for this function.
Add the necessary clock aliases to allow this.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Olof Johansson <olof@lixom.net>
2012-04-25 15:22:01 -06:00
Stephen Warren
aef7704c6c pinctrl: tegra: error reporting cleanup
Print an explicit error message in various failure cases to allow
easier diagnosis.

WARN_ON() some internal failures that users/clients shouldn't be able to
trigger.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-04-25 15:21:47 -06:00
Wolfram Sang
c95eeae9e3 i2c: mxs: handle spurious interrupt
After an error interrupt setting cmd->err, I see another interrupt that
the data engine is empty which clears cmd->err before being processed.
So, clear cmd->err at the beginning of a transfer only to handle these
consecutive interrupts.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-04-25 22:59:44 +02:00
Jeff Layton
b108fe6b08 nfsd: trivial: use SEEK_SET instead of 0 in vfs_llseek
They're equivalent, but SEEK_SET is more informative...

Cc: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-04-25 15:38:23 -04:00
Greg Kroah-Hartman
fee5952fba USB: udlfb.c: remove err() usage
err() was a very old USB-specific macro that I thought had
gone away.  This patch removes it from being used in the
driver and uses dev_err() instead.

CC: Bernie Thompson <bernie@plugable.com>
CC: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-25 12:37:49 -07:00
Greg Kroah-Hartman
21f524321b USB: rtl8150.c: remove err() usage
err() was a very old USB-specific macro that I thought had
gone away.  This patch removes it from being used in the
driver and uses dev_err() instead.

CC: Petko Manolov <petkan@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-25 12:37:49 -07:00
Greg Kroah-Hartman
db6b22196c USB: kaweth.c: remove err() usage
err() was a very old USB-specific macro that I thought had
gone away.  This patch removes it from being used in the
driver and uses dev_err() instead.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-25 12:37:48 -07:00
Greg Kroah-Hartman
495f71e2b9 USB: ipheth.c: remove err() usage
err() was a very old USB-specific macro that I thought had
gone away.  This patch removes it from being used in the
driver and uses dev_err() instead.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-25 12:37:48 -07:00
Greg Kroah-Hartman
50c627c9c3 USB: catc.c: remove err() usage
err() was a very old USB-specific macro that I thought had
gone away.  This patch removes it from being used in the
driver and uses dev_err() instead.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-25 12:37:47 -07:00
David S. Miller
2021492657 Merge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless 2012-04-25 15:13:37 -04:00
Linus Walleij
34fd421349 ARM: 7378/1: mmci: add support for the Nomadik MMCI variant
The Nomadik variant is somewhere inbetween the U300 and the Ux500
variant, its actually expose the same primecell ID as the U300
but had different characteristics so it needs a small revision
bump and hard-coding from the board/device tree. After this it
works just fine.

Acked-by: Ulf Hansson <ulf.hansson@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-04-25 19:55:19 +01:00
Wade Farnsworth
0693bf6814 ARM: 7374/1: add TRACEHOOK support
Add calls to tracehook_report_syscall_{entry,exit} and tracehook_signal_handler

Signed-off-by: Steven Walter <stevenrwalter@gmail.com>
Signed-off-by: Wade Farnsworth <wade_farnsworth@mentor.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-04-25 19:49:28 +01:00
Wade Farnsworth
bf2c9f9866 ARM: 7373/1: add support for the generic syscall.h interface
Supplying the asm-generic/syscall.h interface is a
pre-requisite for HAVE_ARCH_TRACEHOOK

Signed-off-by: Steven Walter <stevenrwalter@gmail.com>
Signed-off-by: Wade Farnsworth <wade_farnsworth@mentor.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-04-25 19:49:27 +01:00
Jonathan Austin
58834eecde ARM: 7385/1: ThumbEE: Use cpuid macros to read ID_PFR0 for ThumbEE
The ThumbEE probe code uses inline assembly to read ID_PFR0 in order to
detect whether ThumbEE is implemented by the processor.

This patch replaces the inline asm with the read_cpuid_ext macro.

Reviewed-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Jonathan Austin <jonathan.austin@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-04-25 19:49:26 +01:00
Dan Carpenter
a1d26ac0dd Extcon: check for allocation failure
Return -ENOMEM if the kmalloc() fails.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-25 11:43:24 -07:00