[ Upstream commit fb1ebb1046 ]
For 'always-on' and 'boot-on' regulators, the set_machine_constraints()
may enable supply before enabling the main regulator, however if the
latter fails, the function returns with an error but the supply remains
enabled.
When this happens, the regulator_register() function continues on the
error path where it puts the supply regulator. Since enabling the supply
is not balanced with a disable call, a warning similar to the following
gets issued from _regulator_put():
[ 1.603889] WARNING: CPU: 2 PID: 44 at _regulator_put+0x8c/0xa0
[ 1.603908] Modules linked in:
[ 1.603926] CPU: 2 UID: 0 PID: 44 Comm: kworker/u16:3 Not tainted 6.18.0-rc4 #0 NONE
[ 1.603938] Hardware name: Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C7 (DT)
[ 1.603945] Workqueue: async async_run_entry_fn
[ 1.603958] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 1.603967] pc : _regulator_put+0x8c/0xa0
[ 1.603976] lr : _regulator_put+0x7c/0xa0
...
[ 1.604140] Call trace:
[ 1.604145] _regulator_put+0x8c/0xa0 (P)
[ 1.604156] regulator_register+0x2ec/0xbf0
[ 1.604166] devm_regulator_register+0x60/0xb0
[ 1.604178] rpm_reg_probe+0x120/0x208
[ 1.604187] platform_probe+0x64/0xa8
...
In order to avoid this, change the set_machine_constraints() function to
disable the supply if enabling the main regulator fails.
Fixes: 05f224ca66 ("regulator: core: Clean enabling always-on regulators + their supplies")
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Link: https://patch.msgid.link/20251107-regulator-disable-supply-v1-1-c95f0536f1b5@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5e4e355ae7 ]
current large PEBS flag check only checks if sample_regs_user contains
unsupported GPRs but doesn't check if sample_regs_intr contains
unsupported GPRs.
Of course, currently PEBS HW supports to sample all perf supported GPRs,
the missed check doesn't cause real issue. But it won't be true any more
after the subsequent patches support to sample SSP register. SSP
sampling is not supported by adaptive PEBS HW and it would be supported
until arch-PEBS HW. So correct this issue.
Fixes: a47ba4d77e ("perf/x86: Enable free running PEBS for REGS_USER/INTR")
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20251029102136.61364-5-dapeng1.mi@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7e772a93eb ]
When intel_pmu_drain_pebs_icl() is called to drain PEBS records, the
perf_event_overflow() could be called to process the last PEBS record.
While perf_event_overflow() could trigger the interrupt throttle and
stop all events of the group, like what the below call-chain shows.
perf_event_overflow()
-> __perf_event_overflow()
->__perf_event_account_interrupt()
-> perf_event_throttle_group()
-> perf_event_throttle()
-> event->pmu->stop()
-> x86_pmu_stop()
The side effect of stopping the events is that all corresponding event
pointers in cpuc->events[] array are cleared to NULL.
Assume there are two PEBS events (event a and event b) in a group. When
intel_pmu_drain_pebs_icl() calls perf_event_overflow() to process the
last PEBS record of PEBS event a, interrupt throttle is triggered and
all pointers of event a and event b are cleared to NULL. Then
intel_pmu_drain_pebs_icl() tries to process the last PEBS record of
event b and encounters NULL pointer access.
To avoid this issue, move cpuc->events[] clearing from x86_pmu_stop()
to x86_pmu_del(). It's safe since cpuc->active_mask or
cpuc->pebs_enabled is always checked before access the event pointer
from cpuc->events[].
Closes: https://lore.kernel.org/oe-lkp/202507042103.a15d2923-lkp@intel.com
Fixes: 9734e25fbf ("perf: Fix the throttle logic for a group")
Reported-by: kernel test robot <oliver.sang@intel.com>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20251029102136.61364-3-dapeng1.mi@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 93e197e524 ]
IORING_SETUP_NO_MMAP rings remain user accessible even before the ctx
setup is finalised, so use WRITE_ONCE consistently when initialising
rings.
Fixes: 03d89a2de2 ("io_uring: support for user allocated memory for rings/sqes")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fbf90d1b69 ]
The Radxa ROCK 5B+/5T USB Type-C port supports Dual Role Data and
should also act as a host. However, currently, when acting as a host,
only self-powered devices work.
Since the ROCK 5B+ supports Dual Role Power, set the power-role
property to "dual" and the try-power-role property to "sink". (along
with related properties)
The ROCK 5T should only support the "source" power-role.
This allows the port to act as a host, supply power to the port, and
allow bus-powered devices to work.
Note that on the ROCK 5T, with this patch applied, it has been
observed that some bus-powered devices do not work correctly. Also,
it has been observed that after connecting a device (and the data-role
switches to host), connecting a host device does not switch the
data-role back to the device role. These issues should be addressed
separately.
Note that there is a separate known issue where USB 3.0 SuperSpeed
devices do not work when oriented in reverse. This issue should also be
addressed separately. (USB 2.0/1.1 devices work in both orientations)
Fixes: 67b2c15d8f ("arm64: dts: rockchip: add USB-C support for ROCK 5B/5B+/5T")
Signed-off-by: FUKAUMI Naoki <naoki@radxa.com>
Link: https://patch.msgid.link/20251104085227.820-1-naoki@radxa.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c105e76bb1 ]
This code calls hfs_bnode_put(node) which drops the refcount and then
dreferences "node" on the next line. It's only safe to use "node"
when we're holding a reference so flip these two lines around.
Fixes: a06ec283e1 ("hfs: add logic of correcting a next unused CNID")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Viacheslav Dubeyko <slava@dubeyko.com>
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
Link: https://lore.kernel.org/r/aN-Xw8KnbSnuIcLk@stanley.mountain
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dea9f84776 ]
Currently, dma_fence_put(job->fence) is called in job notification
callback. However, if a job is canceled, the notification callback is never
invoked, leading to a memory leak. Move dma_fence_put(job->fence)
to the job cleanup function to ensure the fence is always released.
Fixes: aac243092b ("accel/amdxdna: Add command execution")
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20251105194140.1004314-1-lizhi.hou@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a2e5a3cea4 ]
The move extent operation should return -EOPNOTSUPP if any of the inodes
is a quota inode, rather than requiring both to be quota inodes.
Fixes: 02749a4c20 ("ext4: add ext4_is_quota_file()")
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-ID: <20251013015128.499308-2-yi.zhang@huaweicloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2977567b24 ]
Currently, for beacon_stats, ath12k_mac_get_fw_stats() is called
for each started BSS on the specified hardware.
ath12k_mac_get_fw_stats() will wait for the fw_stats_done completion
after fetching the requested data from firmware. For the beacon_stats,
fw_stats_done completion will be set only when stats are received for
all BSSes. However, for other stats like vdev_stats or pdev_stats, there
is one request to the firmware for all enabled BSSes. Since beacon_stats
is fetched individually for all BSSes enabled in that pdev, waiting for
the completion event results in a timeout error when multiple BSSes are
enabled.
Avoid this by completing the fw_stats_done immediately after
updating the requested BSS's beacon stats in the list. Subsequently,
this list will be used to display the beacon stats for all enabled
BSSes in the requested pdev.
Additionally, remove 'num_bcn_recvd' from the ath12k_fw_stats struct
as it is no longer needed.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Fixes: 9fe4669ae9 ("wifi: ath12k: Request beacon stats from firmware")
Signed-off-by: Manish Dharanenthiran <manish.dharanenthiran@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20251031-beacon_stats-v1-2-f52fce7b03ac@qti.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1b58acfd06 ]
When da9055_device_init() fails after regmap_add_irq_chip()
succeeds but mfd_add_devices() fails, the error handling path
only calls mfd_remove_devices() but forgets to call
regmap_del_irq_chip(). This results in a resource leak.
Fix this by adding regmap_del_irq_chip() to the error path so
that resources are released properly.
Fixes: 2896434cf2 ("mfd: DA9055 core driver")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Link: https://patch.msgid.link/20251010011737.1078-1-vulab@iscas.ac.cn
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7543818e97 ]
When there is an attempt to write data and RTW89_FLAG_UNPLUGGED is set,
this means device is disconnected and no urb is submitted. Return
appropriate error code to the caller to properly free the allocated
resources.
Found by Linux Verification Center (linuxtesting.org).
Fixes: 2135c28be6 ("wifi: rtw89: Add usb.{c,h}")
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20251104135720.321110-3-pchelkin@ispras.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 28a4557528 ]
Allow adding rx_skb to rx_free_queue for later reuse on the common error
handling path, otherwise free it.
Found by Linux Verification Center (linuxtesting.org).
Fixes: 2135c28be6 ("wifi: rtw89: Add usb.{c,h}")
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20251104135720.321110-2-pchelkin@ispras.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e52b43883d ]
With CONFIG_CPUMASK_OFFSTACK=y, the 'bind_writers' buffer is allocated via
alloc_cpumask_var() in param_set_cpumask(). But it is not freed, when
setting the module parameter multiple times by sysfs interface or removing
module.
Below kmemleak trace is seen for this issue:
unreferenced object 0xffff888100aabff8 (size 8):
comm "bash", pid 323, jiffies 4295059233
hex dump (first 8 bytes):
07 00 00 00 00 00 00 00 ........
backtrace (crc ac50919):
__kmalloc_node_noprof+0x2e5/0x420
alloc_cpumask_var_node+0x1f/0x30
param_set_cpumask+0x26/0xb0 [locktorture]
param_attr_store+0x93/0x100
module_attr_store+0x1b/0x30
kernfs_fop_write_iter+0x114/0x1b0
vfs_write+0x300/0x410
ksys_write+0x60/0xd0
do_syscall_64+0xa4/0x260
entry_SYSCALL_64_after_hwframe+0x77/0x7f
This issue can be reproduced by:
insmod locktorture.ko bind_writers=1
rmmod locktorture
or:
insmod locktorture.ko bind_writers=1
echo 2 > /sys/module/locktorture/parameters/bind_writers
Considering that setting the module parameter 'bind_writers' or
'bind_readers' by sysfs interface has no real effect, set the parameter
permissions to 0444. To fix the memory leak when removing module, free
'bind_writers' and 'bind_readers' memory in lock_torture_cleanup().
Fixes: 73e3412424 ("locktorture: Add readers_bind and writers_bind module parameters")
Suggested-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Signed-off-by: Wang Liang <wangliang74@huawei.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8436112341 ]
When transitioning from 5-level to 4-level paging, the existing code
incorrectly accesses page table entries by directly dereferencing CR3 and
applying PAGE_MASK. This approach has several issues:
- __native_read_cr3() returns the raw CR3 register value, which on x86_64
includes not just the physical address but also flags Bits above the
physical address width of the system (i.e. above __PHYSICAL_MASK_SHIFT) are
also not masked.
- The pgd value is masked by PAGE_SIZE which doesn't take into account the
higher bits such as _PAGE_BIT_NOPTISHADOW.
Replace this with proper accessor functions:
- native_read_cr3_pa(): Uses CR3_ADDR_MASK to additionally mask metadata out
of CR3 (like SME or LAM bits). All remaining bits are real address bits or
reserved and must be 0.
- mask pgd value with PTE_PFN_MASK instead of PAGE_MASK, accounting for flags
above bit 51 (_PAGE_BIT_NOPTISHADOW in particular). Bits below 51, but above
the max physical address are reserved and must be 0.
Fixes: cb1c9e02b0 ("x86/efistub: Perform 4/5 level paging switch from the stub")
Reported-by: Michael van der Westhuizen <rmikey@meta.com>
Reported-by: Tobias Fleig <tfleig@meta.com>
Co-developed-by: Kiryl Shutsemau <kas@kernel.org>
Signed-off-by: Kiryl Shutsemau <kas@kernel.org>
Signed-off-by: Usama Arif <usamaarif642@gmail.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://patch.msgid.link/20251103141002.2280812-3-usamaarif642@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eb22663125 ]
When transitioning from 5-level to 4-level paging, the existing code
incorrectly accesses page table entries by directly dereferencing CR3 and
applying PAGE_MASK. This approach has several issues:
- __native_read_cr3() returns the raw CR3 register value, which on x86_64
includes not just the physical address but also flags. Bits above the
physical address width of the system i.e. above __PHYSICAL_MASK_SHIFT) are
also not masked.
- The PGD entry is masked by PAGE_SIZE which doesn't take into account the
higher bits such as _PAGE_BIT_NOPTISHADOW.
Replace this with proper accessor functions:
- native_read_cr3_pa(): Uses CR3_ADDR_MASK to additionally mask metadata out
of CR3 (like SME or LAM bits). All remaining bits are real address bits or
reserved and must be 0.
- mask pgd value with PTE_PFN_MASK instead of PAGE_MASK, accounting for flags
above bit 51 (_PAGE_BIT_NOPTISHADOW in particular). Bits below 51, but above
the max physical address are reserved and must be 0.
Fixes: e9d0e6330e ("x86/boot/compressed/64: Prepare new top-level page table for trampoline")
Reported-by: Michael van der Westhuizen <rmikey@meta.com>
Reported-by: Tobias Fleig <tfleig@meta.com>
Co-developed-by: Kiryl Shutsemau <kas@kernel.org>
Signed-off-by: Kiryl Shutsemau <kas@kernel.org>
Signed-off-by: Usama Arif <usamaarif642@gmail.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/r/a482fd68-ce54-472d-8df1-33d6ac9f6bb5@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 35501ac3c7 ]
When ETR is enabled as CS_MODE_SYSFS, if the buffer size is changed
and enabled again, currently sysfs_buf will point to the newly
allocated memory(buf_new) and free the old memory(buf_old). But the
etr_buf that is being used by the ETR remains pointed to buf_old, not
updated to buf_new. In this case, it will result in a memory
use-after-free issue.
Fix this by checking ETR's mode before updating and releasing buf_old,
if the mode is CS_MODE_SYSFS, then skip updating and releasing it.
Fixes: bd2767ec3d ("coresight: Fix run time warnings while reusing ETR buffer")
Signed-off-by: Xiaoqi Zhuang <xiaoqi.zhuang@oss.qualcomm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Tested-by: Leo Yan <leo.yan@arm.com>
Link: https://lore.kernel.org/r/20251021-fix_etr_issue-v3-1-99a2d066fee2@oss.qualcomm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 21ef26d0e7 ]
When the PCIe controller is running in endpoint mode, the controller
initialization is triggered by a PERST# (PCIe reset) GPIO deassertion.
The driver has configured an IRQ to trigger when the PERST# GPIO changes
state. Without the pinctrl definition, we do not get an IRQ when PERST#
is deasserted, so the PCIe controller never gets initialized.
Add the missing definitions, so that the controller actually gets
initialized.
Fixes: ec142c44b0 ("arm64: tegra: Add P2U and PCIe controller nodes to Tegra234 DT")
Fixes: 0580286d0d ("arm64: tegra: Add Tegra234 PCIe C4 EP definition")
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
[treding@nvidia.com: add blank lines to separate blocks]
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cf76553aaa ]
Stephen reported that on KASAN builds he's seeing:
vmlinux.o: warning: objtool: user_exc_vmm_communication+0x15a: call to __kasan_check_read() leaves .noinstr.text section
vmlinux.o: warning: objtool: exc_debug_user+0x182: call to __kasan_check_read() leaves .noinstr.text section
vmlinux.o: warning: objtool: exc_int3+0x123: call to __kasan_check_read() leaves .noinstr.text section
vmlinux.o: warning: objtool: noist_exc_machine_check+0x17a: call to __kasan_check_read() leaves .noinstr.text section
vmlinux.o: warning: objtool: fred_exc_machine_check+0x17e: call to __kasan_check_read() leaves .noinstr.text section
This turns out to be atomic ops from unwind_reset_info() that have
explicit instrumentation. Place unwind_reset_info() in the preceding
instrumentation_begin() section.
Fixes: c6439bfaab ("Merge tag 'trace-deferred-unwind-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20251105100014.GY4068168@noisy.programming.kicks-ass.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3862123e9b ]
The "ti,twl4030-power-n900" compatible string is obsolete and is not
supported by any in-kernel driver. Currently, the kernel falls back to
the second entry, "ti,twl4030-power-idle-osc-off", to bind a driver to
this node.
Make this fallback explicit by removing the obsolete board-specific
compatible. This preserves the existing functionality while making the
DTS compliant with the new, stricter 'ti,twl.yaml' binding.
Fixes: daebabd578 ("mfd: twl4030-power: Fix PM idle pin configuration to not conflict with regulators")
Signed-off-by: Jihed Chaibi <jihed.chaibi.dev@gmail.com>
Link: https://lore.kernel.org/r/20250914192516.164629-4-jihed.chaibi.dev@gmail.com
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f7f3bc1830 ]
The "ti,twl4030-power-beagleboard-xm" compatible string is obsolete and
is not supported by any in-kernel driver. Currently, the kernel falls
back to the second entry, "ti,twl4030-power-idle-osc-off", to bind a
driver to this node.
Make this fallback explicit by removing the obsolete board-specific
compatible. This preserves the existing functionality while making the
DTS compliant with the new, stricter 'ti,twl.yaml' binding.
Fixes: 9188883fd6 ("ARM: dts: Enable twl4030 off-idle configuration for selected omaps")
Signed-off-by: Jihed Chaibi <jihed.chaibi.dev@gmail.com>
Link: https://lore.kernel.org/r/20250914192516.164629-3-jihed.chaibi.dev@gmail.com
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9c95fc710b ]
Without a serial console speed specified in chosen/stdout-path in the
DTB, the serial console uses the default speed of the serial driver,
unless explicitly overridden in a legacy console= kernel command-line
parameter.
After dropping "ti,omap3-uart" from the list of compatible values in DT,
AM33xx serial ports can no longer be used with the legacy OMAP serial
driver, but only with the OMAP-flavored 8250 serial driver (which is
mutually-exclusive with the former). However, replacing
CONFIG_SERIAL_OMAP=y by CONFIG_SERIAL_8250_OMAP=y (with/without enabling
CONFIG_SERIAL_8250_OMAP_TTYO_FIXUP) may not be sufficient to restore
serial console functionality: the legacy OMAP serial driver defaults to
115200 bps, while the 8250 serial driver defaults to 9600 bps, causing
no visible output on the serial console when no appropriate console=
kernel command-line parameter is specified.
Fix this for all AM33xx boards by adding ":115200n8" to
chosen/stdout-path. This requires replacing the "&uartN" reference by
the corresponding "serialN" DT alias.
Fixes: ca8be8fc2c ("ARM: dts: am33xx-l4: fix UART compatible")
Fixes: 077e1cde78 ("ARM: omap2plus_defconfig: Enable 8250_OMAP")
Closes: https://lore.kernel.org/CAMuHMdUb7Jb2=GqK3=Rn+Gv5G9KogcQieqDvjDCkJA4zyX4VcA@mail.gmail.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Tested-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reviewed-by: Bruno Thomsen <bruno.thomsen@gmail.com>
Link: https://lore.kernel.org/r/63cef5c3643d359e8ec13366ca79377f12dd73b1.1759398641.git.geert+renesas@glider.be
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4f596acc26 ]
When creating multi-split BTF we correctly set the start string offset
to be the size of the base string section plus the base BTF start
string offset; the latter is needed for multi-split BTF since the
offset is non-zero there.
Unfortunately the BTF parsing case needed that logic and it was
missed.
Fixes: 4e29128a9a ("libbpf/btf: Fix string handling to support multi-split BTF")
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20251104203309.318429-2-alan.maguire@oracle.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b4e002d8a7 ]
When the CPU that the QSPI interrupt handler runs on (typically CPU 0)
is excessively busy, it can lead to rare cases of the IRQ thread not
running before the transfer timeout is reached.
While handling the timeouts, any pending transfers are cleaned up and
the message that they correspond to is marked as failed, which leaves
the curr_xfer field pointing at stale memory.
To avoid this, clear curr_xfer to NULL upon timeout and check for this
condition when the IRQ thread is finally run.
While at it, also make sure to clear interrupts on failure so that new
interrupts can be run.
A better, more involved, fix would move the interrupt clearing into a
hard IRQ handler. Ideally we would also want to signal that the IRQ
thread no longer needs to be run after the timeout is hit to avoid the
extra check for a valid transfer.
Fixes: 921fc1838f ("spi: tegra210-quad: Add support for Tegra210 QSPI controller")
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Vishwaroop A <va@nvidia.com>
Link: https://patch.msgid.link/20251028155703.4151791-2-va@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4e97bae1b4 ]
This is a class, not a guard so why on earth is it checking for guard
pointers or conditional lock acquisition? None of it makes any sense at
all.
I'm not sure what happened back then. Maybe I had a brief psychedelic
period that I completely forgot about and spaced out into a zone where
that initial macro implementation made any sense at all.
Link: https://patch.msgid.link/20251103-work-creds-init_cred-v1-1-cb3ec8711a6a@kernel.org
Fixes: 5c21c5f22d ("cleanup: add a scoped version of CLASS()")
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a0c7005333 ]
In iommu_mmio_write(), it validates the user-provided offset with the
check: `iommu->dbg_mmio_offset > iommu->mmio_phys_end - 4`.
This assumes a 4-byte access. However, the corresponding
show handler, iommu_mmio_show(), uses readq() to perform an 8-byte
(64-bit) read.
If a user provides an offset equal to `mmio_phys_end - 4`, the check
passes, and will lead to a 4-byte out-of-bounds read.
Fix this by adjusting the boundary check to use sizeof(u64), which
corresponds to the size of the readq() operation.
Fixes: 7a4ee419e8 ("iommu/amd: Add debugfs support to dump IOMMU MMIO registers")
Signed-off-by: Songtang Liu <liusongtang@bytedance.com>
Reviewed-by: Dheeraj Kumar Srivastava <dheerajkumar.srivastava@amd.com>
Tested-by: Dheeraj Kumar Srivastava <dheerajkumar.srivastava@amd.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d915fe20e5 ]
Add an initializer that can be used for the ns common initialization for
static namespace such as most init namespaces.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/87ecqhy2y5.ffs@tglx
Signed-off-by: Christian Brauner <brauner@kernel.org>
Stable-dep-of: 3dd50c5866 ("ns: initialize ns_list_node for initial namespaces")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 999e9bc953 ]
Prevent calling ti_sci_cmd_set_io_isolation() on firmware
that does not support the IO_ISOLATION capability. Add the
MSG_FLAG_CAPS_IO_ISOLATION capability flag and check it before
attempting to set IO isolation during suspend/resume operations.
Without this check, systems with older firmware may experience
undefined behavior or errors when entering/exiting suspend states.
Fixes: ec24643bdd ("firmware: ti_sci: Add system suspend and resume call")
Signed-off-by: Thomas Richard (TI.com) <thomas.richard@bootlin.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Link: https://patch.msgid.link/20251031-ti-sci-io-isolation-v2-1-60d826b65949@bootlin.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 98dd514344 ]
If the MMU is down, panthor_vm_unmap_range() might return an error.
We expect the page table to be updated still, and if the MMU is blocked,
the rest of the GPU should be blocked too, so no risk of accessing
physical memory returned to the system (which the current code doesn't
cover for anyway).
Proceed with the rest of the cleanup instead of bailing out and leaving
the va_node inserted in the drm_mm, which leads to UAF when other
adjacent nodes are removed from the drm_mm tree.
Reported-by: Lars-Ivar Hesselberg Simonsen <lars-ivar.simonsen@arm.com>
Closes: https://gitlab.freedesktop.org/panfrost/linux/-/issues/57
Fixes: 8a1cc07578 ("drm/panthor: Add GEM logical block")
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patch.msgid.link/20251031154818.821054-2-boris.brezillon@collabora.com
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 08be57e6e8 ]
There is a race between panthor_device_unplug() and
panthor_device_suspend() which can lead to IRQ handlers running on a
powered down GPU. This is how it can happen:
- unplug routine calls drm_dev_unplug()
- panthor_device_suspend() can now execute, and will skip a lot of
important work because the device is currently marked as unplugged.
- IRQs will remain active in this case and IRQ handlers can therefore
try to access a powered down GPU.
The fix is simply to take the PM ref in panthor_device_unplug() a
little bit earlier, before drm_dev_unplug().
Signed-off-by: Ketil Johnsen <ketil.johnsen@arm.com>
Fixes: 5fe909cae1 ("drm/panthor: Add the device logical block")
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patch.msgid.link/20251022103242.1083311-1-ketil.johnsen@arm.com
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7051f6ba96 ]
The function panthor_fw_unplug() will free the FW memory sections.
The problem is that there could still be pending FW events which are yet
not handled at this point. process_fw_events_work() can in this case try
to access said freed memory.
Simply call disable_work_sync() to both drain and prevent future
invocation of process_fw_events_work().
Signed-off-by: Ketil Johnsen <ketil.johnsen@arm.com>
Fixes: de85488138 ("drm/panthor: Add the scheduler logical block")
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patch.msgid.link/20251027140217.121274-1-ketil.johnsen@arm.com
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 94a6d20fea ]
group_free_queue() can be called on a partially initialized queue
object if something fails in group_create_queue(). Make sure we don't
call drm_sched_entity_destroy() on an entity that hasn't been
initialized.
Fixes: 7d9c3442b0 ("drm/panthor: Defer scheduler entitiy destruction to queue release")
Reviewed-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patch.msgid.link/20251031160318.832427-2-boris.brezillon@collabora.com
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bb7939e332 ]
In practice it's not going to fail because we're passing the current
sanity checks done by drm_sched_entity_init(), and that's the only
reason it would return an error, but better safe than sorry.
Fixes: de85488138 ("drm/panthor: Add the scheduler logical block")
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patch.msgid.link/20251031160318.832427-1-boris.brezillon@collabora.com
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a63dd8fd13 ]
When page cache is used, writebacks are done on a page granularity, and it
is expected that the underlying filesystem (such as v9fs) should respect
the write position. However, currently v9fs will passthrough O_APPEND to
the server even on cached mode. This causes data corruption if a sync or
fstat gets between two writes to the same file.
This patch removes the APPEND flag from the open request we send to the
server when writeback caching is involved. I believe keeping server-side
APPEND is probably fine for uncached mode (even if two fds are opened, one
without O_APPEND and one with it, this should still be fine since they
would use separate fid for the writes).
Signed-off-by: Tingmao Wang <m@maowtm.org>
Fixes: 4eb3117888 ("fs/9p: Rework cache modes and add new options to Documentation")
Message-ID: <20251102235631.8724-1-m@maowtm.org>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 95aa2041c6 ]
In commit 9cf2317b79 ("scsi: target: Move I/O path stats to per CPU")
I saw we sometimes use %u and also misread the spec. As a result I
thought all the stats were supposed to be 32-bit only. However, for the
majority of cases we support currently, the spec specifies u64 bit
stats. This patch converts the stats changed in the commit above to u64.
Fixes: 9cf2317b79 ("scsi: target: Move I/O path stats to per CPU")
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Link: https://patch.msgid.link/20250917221338.14813-2-michael.christie@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 446fcf4946 ]
Existing userspace (in particular, upower) disables charge control by
setting the start threshold to 0 and the stop threshold to 100.
Handle that by actually setting the enable bit to 0 when a start
threshold of 0 was requested.
Fixes: cc3e883a06 ("power: supply: qcom_battmgr: Add charge control support")
Signed-off-by: Val Packett <val@packett.cool>
Link: https://patch.msgid.link/20251012233333.19144-4-val@packett.cool
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8809980fdc ]
The sysfs API documentation says that drivers "round written values to
the nearest supported value" for charge_control_end_threshold.
Let's do this for both thresholds, as userspace (e.g. upower) generally
does not expect these writes to fail at all.
Fixes: cc3e883a06 ("power: supply: qcom_battmgr: Add charge control support")
Signed-off-by: Val Packett <val@packett.cool>
Link: https://patch.msgid.link/20251012233333.19144-3-val@packett.cool
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ea14bae6df ]
Since wm831x_set_bits() may return error, log failure and exit from
wm831x_usb_limit_change() in such case.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 626b6cd5f5 ("power: wm831x_power: Support USB charger current limit management")
Signed-off-by: Ivan Abramov <i.abramov@mt-integration.ru>
Link: https://patch.msgid.link/20251009170553.566561-1-i.abramov@mt-integration.ru
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 15aca30cc6 ]
There is a typo in rt9467_set_value_from_ranges() that can cause leaving local
variable sel with an undefined value which is then used in regmap_field_write().
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 6f7f70e3a8 ("power: supply: rt9467: Add Richtek RT9467 charger driver")
Signed-off-by: Murad Masimov <m.masimov@mt-integration.ru>
Link: https://patch.msgid.link/20251009145308.1830893-1-m.masimov@mt-integration.ru
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8b27fe2d8d ]
The return value of rt9467_set_value_from_ranges() when setting AICL VTH is
not checked, even though it may fail.
Log error and return from rt9467_run_aicl() on fail.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 6f7f70e3a8 ("power: supply: rt9467: Add Richtek RT9467 charger driver")
Signed-off-by: Ivan Abramov <i.abramov@mt-integration.ru>
Link: https://patch.msgid.link/20251009144725.562278-1-i.abramov@mt-integration.ru
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2c68ac48c5 ]
Since iio_read_channel_processed() may fail, return its exit code on error.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 814755c48f ("power: max17040: get thermal data from adc if available")
Signed-off-by: Ivan Abramov <i.abramov@mt-integration.ru>
Link: https://patch.msgid.link/20251008133648.559286-1-i.abramov@mt-integration.ru
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 92ec7e7b86 ]
Since devm_delayed_work_autocancel() may fail, add return code check and
exit cw_bat_probe() on error.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 0cb172a491 ("power: supply: cw2015: Use device managed API to simplify the code")
Signed-off-by: Ivan Abramov <i.abramov@mt-integration.ru>
Link: https://patch.msgid.link/20251008120711.556021-1-i.abramov@mt-integration.ru
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6cdc4d488c ]
The device node pointers `np_conn` and `np_edev`, obtained from
of_parse_phandle() and of_get_parent() respectively, are not released.
This results in a reference count leak.
Add of_node_put() calls after the last use of these device nodes to
properly release their references and fix the leaks.
Fixes: 8242336dc8 ("power: supply: rt5033_charger: Add cable detection and USB OTG supply")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Link: https://patch.msgid.link/20250929113234.1726-1-vulab@iscas.ac.cn
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5eb579dfd4 ]
When a CPU from a new node boots, the old root may happen to be
connected to the new root even if their node mismatch, as depicted in
the following scenario:
1) CPU 0 boots and creates the first group for node 0.
[GRP0:0]
node 0
|
CPU 0
2) CPU 1 from node 1 boots and creates a new top that corresponds to
node 1, but it also connects the old root from node 0 to the new root
from node 1 by mistake.
[GRP1:0]
node 1
/ \
/ \
[GRP0:0] [GRP0:1]
node 0 node 1
| |
CPU 0 CPU 1
3) This eventually leads to an imbalanced tree where some node 0 CPUs
migrate node 1 timers (and vice versa) way before reaching the
crossnode groups, resulting in more frequent remote memory accesses
than expected.
[GRP2:0]
NUMA_NO_NODE
/ \
[GRP1:0] [GRP1:1]
node 1 node 0
/ \ |
/ \ [...]
[GRP0:0] [GRP0:1]
node 0 node 1
| |
CPU 0... CPU 1...
A balanced tree should only contain groups having children that belong
to the same node:
[GRP2:0]
NUMA_NO_NODE
/ \
[GRP1:0] [GRP1:0]
node 0 node 1
/ \ / \
/ \ / \
[GRP0:0] [...] [...] [GRP0:1]
node 0 node 1
| |
CPU 0... CPU 1...
In order to fix this, the hierarchy must be unfolded up to the crossnode
level as soon as a node mismatch is detected. For example the stage 2
above should lead to this layout:
[GRP2:0]
NUMA_NO_NODE
/ \
[GRP1:0] [GRP1:1]
node 0 node 1
/ \
/ \
[GRP0:0] [GRP0:1]
node 0 node 1
| |
CPU 0 CPU 1
This means that not only GRP1:0 must be created but also GRP1:1 and
GRP2:0 in order to prepare a balanced tree for next CPUs to boot.
Fixes: 7ee9887703 ("timers: Implement the hierarchical pull model")
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/20251024132536.39841-4-frederic@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fa9620355d ]
Initializing the tmc's group, the group's number of children and the
group's parent can all be done without locking because:
1) Reading the group's parent and its group mask is done locklessly.
2) The connections prepared for a given CPU hierarchy are visible to the
target CPU once online, thanks to the CPU hotplug enforced memory
ordering.
3) In case of a newly created upper level, the new root and its
connections and initialization are made visible by the CPU which made
the connections. When that CPUs goes idle in the future, the new link
is published by tmigr_inactive_up() through the atomic RmW on
->migr_state.
4) If CPUs were still walking up the active hierarchy, they could observe
the new root earlier. In this case the ordering is enforced by an
early initialization of the group mask and by barriers that maintain
address dependency as explained in:
b729cc1ec2 ("timers/migration: Fix another race between hotplug and idle entry/exit")
de3ced72a7 ("timers/migration: Enforce group initialization visibility to tree walkers")
5) Timers are propagated by a chain of group locking from the bottom to
the top. And while doing so, the tree also propagates groups links
and initialization. Therefore remote expiration, which also relies
on group locking, will observe those links and initialization while
holding the root lock before walking the tree remotely and update
remote timers. This is especially important for migrators in the
active hierarchy that may observe the new root early.
Therefore the locking is unnecessary at initialization. If anything, it
just brings confusion. Remove it.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/20251024132536.39841-3-frederic@kernel.org
Stable-dep-of: 5eb579dfd4 ("timers/migration: Fix imbalanced NUMA trees")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6c181b5667 ]
Both the "do while" and "while" loops in tmigr_setup_groups() eventually
mimic the behaviour of "for" loops.
Simplify accordingly.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/20251024132536.39841-2-frederic@kernel.org
Stable-dep-of: 5eb579dfd4 ("timers/migration: Fix imbalanced NUMA trees")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a4aa1ceb89 ]
Update the register offsets for all the clock ref branches to match the
new address mapping in the TCSR subsystem.
Fixes: 2c1d6ce4f3 ("clk: qcom: Add TCSR clock driver for Glymur SoC")
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Tested-by: Jagadeesh Kona <jagadeesh.kona@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251031-tcsrcc_glymur-v1-1-0efb031f0ac5@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
