The A733 has six SPI controllers with the same IP as the A523.
Like the A523, one of them (spi1) also supports DBI mode.
Add SoC specific compatible strings, falling back to the A523 ones.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://patch.msgid.link/20260812-allwinner-a733-spi-support-v2-1-937bff0fa78e@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The controller has DTR support, a bit must be set for it. The behaviour
is interesting though, as the speed won't improve when enabled. This is
because there seems to be an internal divisor (/2) which keeps the rate
equal when DTR is enabled. As a result, this commit also doubles the
target bus speed, which in practice does not happen. This way, there is
a real gain:
Before:
$ flash_speed /dev/mtd0 -dc10
eraseblock write speed is 1000 KiB/s
[...]
eraseblock read speed is 1199 KiB/s
[...]
After:
$ flash_speed /dev/mtd0 -dc10
eraseblock write speed is 985 KiB/s
[...]
eraseblock read speed is 1540 KiB/s
[...]
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://patch.msgid.link/20260813-perso-ma35d1-upstream-qspi-v1-4-b217b9870eb1@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The controller is capable of sending several bytes for the command, it
does not even know this is a command. Just mimic the address steps here
to allow double byte commands, which may be needed for DTR support.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://patch.msgid.link/20260813-perso-ma35d1-upstream-qspi-v1-3-b217b9870eb1@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The speed setting is wrongly placed inside the "setup transfer" helper,
since the bus configuration may require the speed to be correct. Indeed,
DTR mode (not yet available) divides by 2 the bus clock when enabled. As
a result, to remain at a constant clock speed (and improve the data
rate), we must double the bus clock when enabling DTR. In order to
prepare for this change, move all the bus configuration required for
each step of the operation inside a unique helper called
nuvoton_qspi_configure_bus().
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://patch.msgid.link/20260813-perso-ma35d1-upstream-qspi-v1-2-b217b9870eb1@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The controller private data is already fetched at the start of
dw_spi_setup(). Drop the redundant inner declaration that shadows it.
Signed-off-by: Liang Hao <haohlliang@gmail.com>
Link: https://patch.msgid.link/20260814114235.31281-1-haohlliang@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When dma_request_chan() returns -EPROBE_DEFER, the error path jumps to
disable_pm and calls pm_runtime_disable() even though pm_runtime_enable()
was never called, leaving disable_depth unbalanced and the device
permanently PM-disabled.
Route the defer path through free_dma to skip pm_runtime_disable().
Fixes: 6bfbf4d0aa ("spi: img-spfi: Use dma_request_chan() instead dma_request_slave_channel()")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Link: https://patch.msgid.link/20260808-spfi-v1-1-6bc4345be430@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Treat a failure from devm_request_irq() as a probe error instead of
continuing without an IRQ after only reporting a warning.
Return the error through the existing error path to ensure the driver
does not continue with an unsuccessfully requested IRQ.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Link: https://patch.msgid.link/20260807102932.45785-2-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
platform_get_irq_optional() returns a positive IRQ number on success or
a negative error code on failure. For an optional IRQ, -ENXIO indicates
that no IRQ is available, while other errors should be propagated.
Propagate errors such as -EPROBE_DEFER and -EINVAL instead of continuing
probe without the IRQ.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Link: https://patch.msgid.link/20260807102932.45785-1-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Md Sadre Alam <md.alam@oss.qualcomm.com> says:
The Qualcomm QPIC SPI-NAND controller supports both single (x1) and
quad (x4) transfer modes, however the current driver operates only in
single-bit mode. This series adds support for quad data transfers and
includes a vendor-specific fix required for Macronix SPI-NAND devices.
Link: https://patch.msgid.link/20260807-quad-v2-0-8ec821e2f22b@oss.qualcomm.com
Macronix SPI-NAND devices use opcode 0x6b for quad output cache reads,
while most other devices use opcode 0xeb. The QPIC SPI-NAND driver does
not currently recognize opcode 0x6b, causing read operations to fail
when Macronix devices select this cache read variant.
Add the Macronix-specific read opcode to the command mapping logic and
treat it the same as the existing quad read operations.
This allows Macronix SPI-NAND devices to operate correctly in quad read
mode.
Signed-off-by: Md Sadre Alam <md.alam@oss.qualcomm.com>
Link: https://patch.msgid.link/20260807-quad-v2-3-8ec821e2f22b@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for quad (x4) transfer mode in the QPIC SPI NAND driver.
The controller supports both single (x1) and quad (x4) SPI transfers,
but the driver currently operates only in x1 mode.
Track the QUAD enable state from the device configuration register
(0xB0) and switch the data transfer width accordingly. When the core
enables quad mode, use x4 transfers for read and program operations to
improve throughput.
Introduce a quad_mode flag in struct qpic_spi_nand to cache the current
device state. The flag is updated based on GET_FEATURE responses from
the configuration register.
Signed-off-by: Md Sadre Alam <md.alam@oss.qualcomm.com>
Link: https://patch.msgid.link/20260807-quad-v2-2-8ec821e2f22b@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Move qcom_spi_cmd_mapping() above qcom_spi_read_page() so it can be
used by read path changes added in a subsequent patch.
No functional change.
Signed-off-by: Md Sadre Alam <md.alam@oss.qualcomm.com>
Link: https://patch.msgid.link/20260807-quad-v2-1-8ec821e2f22b@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
platform_get_irq_optional() returns a positive IRQ number on success or
a negative error code on failure. For an optional IRQ, -ENXIO indicates
that no IRQ is available, while other errors should be propagated.
Instead of only checking for -EPROBE_DEFER, propagate all error codes
returned by platform_get_irq_optional() other than -ENXIO, so that
failures are properly reported to the caller.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Link: https://patch.msgid.link/20260807103848.46315-1-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
With CONFIG_HWSPINLOCK=n the of_hwspin_lock_get_id() stub returns 0
unconditionally. In sprd_adi_probe() the guard
if (ret > 0 || (IS_ENABLED(CONFIG_HWSPINLOCK) && ret == 0))
is false for that 0, so it takes the else branch, where the switch has no
case for 0 and lands in
default:
return dev_err_probe(&pdev->dev, ret, "failed to find hwlock id\n");
dev_err_probe() returns its err argument unchanged, so probe logs
"failed to find hwlock id" and then returns 0, reporting success.
sprd_adi_hw_init(), the restart handler and devm_spi_register_controller()
are all skipped: the device binds but no SPI controller is ever
registered.
The hardware spinlock is optional for this controller and the -ENOENT arm
already covers "no hardware spinlock supplied". Treat the stub's 0 the
same way and continue without a lock; all four users of sadi->hwlock
already test it for NULL.
This is not reachable on production kernels. Kconfig has
depends on HWSPINLOCK || (COMPILE_TEST && !HWSPINLOCK)
so the affected configuration exists only under COMPILE_TEST, where no
real hardware is present.
Found by smatch:
drivers/spi/spi-sprd-adi.c:560 sprd_adi_probe() warn: passing zero to 'dev_err_probe'
Fixes: f9adf61e98 ("spi: sprd: adi: Change hwlock to be optional")
Assisted-by: Claude:claude-opus-5
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: Babanpreet Singh <bbnpreetsingh@gmail.com>
Link: https://patch.msgid.link/20260729053543.7-1-bbnpreetsingh@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
DQS is a typical SPI memory signal used to help with reading the data on
the bus at high speeds (especially in DTR mode) by avoiding clock
skews. The chip generates a clock signal synchronized with its data
output fronts, also called data strobe.
SPI NOR and SPI NAND cores must set this flag in order to indicate to
other layers that DQS is available.
Create a getter and a setter to reach this capability.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://patch.msgid.link/20260810-winbond-nand-next-phy-tuning-v3-1-a97c3a61e675@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Jisheng Zhang <jszhang@kernel.org> says:
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use #ifdef guards or
__maybe_unused.
Compiled testd for arm, arm64, riscv and riscv64 with below
combinations:
!PM && !PM_SLEEP
PM && !PM_SLEEP
PM && PM_SLEEP
Link: https://patch.msgid.link/20260803142003.12857-1-jszhang@kernel.org
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use __maybe_unused.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20260803142003.12857-40-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use #ifdef guards.
This has the advantage of always compiling these functions in,
independently of any Kconfig option. Thanks to that, bugs and other
regressions are subsequently easier to catch.
At the same time, for pch_spi_pd_driver, we also switch to modern
driver.pm for pm ops.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20260803142003.12857-39-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use __maybe_unused.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20260803142003.12857-38-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use #ifdef guards or
__maybe_unused.
This has the advantage of always compiling these functions in,
independently of any Kconfig option. Thanks to that, bugs and other
regressions are subsequently easier to catch.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20260803142003.12857-37-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use #ifdef guards.
This has the advantage of always compiling these functions in,
independently of any Kconfig option. Thanks to that, bugs and other
regressions are subsequently easier to catch.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20260803142003.12857-36-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use #ifdef guards.
This has the advantage of always compiling these functions in,
independently of any Kconfig option. Thanks to that, bugs and other
regressions are subsequently easier to catch.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20260803142003.12857-35-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use __maybe_unused.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20260803142003.12857-34-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use #ifdef guards or
__maybe_unused.
This has the advantage of always compiling these functions in,
independently of any Kconfig option. Thanks to that, bugs and other
regressions are subsequently easier to catch.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20260803142003.12857-33-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use __maybe_unused.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20260803142003.12857-32-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use #ifdef guards.
This has the advantage of always compiling these functions in,
independently of any Kconfig option. Thanks to that, bugs and other
regressions are subsequently easier to catch.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20260803142003.12857-31-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use #ifdef guards.
This has the advantage of always compiling these functions in,
independently of any Kconfig option. Thanks to that, bugs and other
regressions are subsequently easier to catch.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20260803142003.12857-30-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use #ifdef guards.
This has the advantage of always compiling these functions in,
independently of any Kconfig option. Thanks to that, bugs and other
regressions are subsequently easier to catch.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20260803142003.12857-29-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use #ifdef guards.
This has the advantage of always compiling these functions in,
independently of any Kconfig option. Thanks to that, bugs and other
regressions are subsequently easier to catch.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20260803142003.12857-28-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use #ifdef guards.
This has the advantage of always compiling these functions in,
independently of any Kconfig option. Thanks to that, bugs and other
regressions are subsequently easier to catch.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20260803142003.12857-27-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use __maybe_unused.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20260803142003.12857-26-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use #ifdef guards.
This has the advantage of always compiling these functions in,
independently of any Kconfig option. Thanks to that, bugs and other
regressions are subsequently easier to catch.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20260803142003.12857-25-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use #ifdef guards.
This has the advantage of always compiling these functions in,
independently of any Kconfig option. Thanks to that, bugs and other
regressions are subsequently easier to catch.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20260803142003.12857-24-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use __maybe_unused.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20260803142003.12857-23-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use __maybe_unused.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20260803142003.12857-22-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use __maybe_unused.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20260803142003.12857-21-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use #ifdef guards.
This has the advantage of always compiling these functions in,
independently of any Kconfig option. Thanks to that, bugs and other
regressions are subsequently easier to catch.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20260803142003.12857-20-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use #ifdef guards.
This has the advantage of always compiling these functions in,
independently of any Kconfig option. Thanks to that, bugs and other
regressions are subsequently easier to catch.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20260803142003.12857-19-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use __maybe_unused.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20260803142003.12857-18-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use #ifdef guards.
This has the advantage of always compiling these functions in,
independently of any Kconfig option. Thanks to that, bugs and other
regressions are subsequently easier to catch.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20260803142003.12857-17-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use __maybe_unused.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20260803142003.12857-16-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use #ifdef guards.
This has the advantage of always compiling these functions in,
independently of any Kconfig option. Thanks to that, bugs and other
regressions are subsequently easier to catch.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20260803142003.12857-15-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use #ifdef guards.
This has the advantage of always compiling these functions in,
independently of any Kconfig option. Thanks to that, bugs and other
regressions are subsequently easier to catch.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20260803142003.12857-14-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use #ifdef guards.
This has the advantage of always compiling these functions in,
independently of any Kconfig option. Thanks to that, bugs and other
regressions are subsequently easier to catch.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20260803142003.12857-13-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use #ifdef guards.
This has the advantage of always compiling these functions in,
independently of any Kconfig option. Thanks to that, bugs and other
regressions are subsequently easier to catch.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20260803142003.12857-12-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use #ifdef guards.
This has the advantage of always compiling these functions in,
independently of any Kconfig option. Thanks to that, bugs and other
regressions are subsequently easier to catch.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20260803142003.12857-11-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
