* kvm-arm64/el2-kcfi:
: kCFI support in the EL2 hypervisor, courtesy of Pierre-Clément Tosi
:
: Enable the usage fo CONFIG_CFI_CLANG (kCFI) for hardening indirect
: branches in the EL2 hypervisor. Unlike kernel support for the feature,
: CFI failures at EL2 are always fatal.
KVM: arm64: nVHE: Support CONFIG_CFI_CLANG at EL2
KVM: arm64: Introduce print_nvhe_hyp_panic helper
arm64: Introduce esr_brk_comment, esr_is_cfi_brk
KVM: arm64: VHE: Mark __hyp_call_panic __noreturn
KVM: arm64: nVHE: gen-hyprel: Skip R_AARCH64_ABS32
KVM: arm64: nVHE: Simplify invalid_host_el2_vect
KVM: arm64: Fix __pkvm_init_switch_pgd call ABI
KVM: arm64: Fix clobbered ELR in sync abort/SError
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
* kvm-arm64/ctr-el0:
: Support for user changes to CTR_EL0, courtesy of Sebastian Ott
:
: Allow userspace to change the guest-visible value of CTR_EL0 for a VM,
: so long as the requested value represents a subset of features supported
: by hardware. In other words, prevent the VMM from over-promising the
: capabilities of hardware.
:
: Make this happen by fitting CTR_EL0 into the existing infrastructure for
: feature ID registers.
KVM: selftests: Assert that MPIDR_EL1 is unchanged across vCPU reset
KVM: arm64: nv: Unfudge ID_AA64PFR0_EL1 masking
KVM: selftests: arm64: Test writes to CTR_EL0
KVM: arm64: rename functions for invariant sys regs
KVM: arm64: show writable masks for feature registers
KVM: arm64: Treat CTR_EL0 as a VM feature ID register
KVM: arm64: unify code to prepare traps
KVM: arm64: nv: Use accessors for modifying ID registers
KVM: arm64: Add helper for writing ID regs
KVM: arm64: Use read-only helper for reading VM ID registers
KVM: arm64: Make idregs debugfs iterator search sysreg table directly
KVM: arm64: Get sys_reg encoding from descriptor in idregs_debug_show()
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
* kvm-arm64/shadow-mmu:
: Shadow stage-2 MMU support for NV, courtesy of Marc Zyngier
:
: Initial implementation of shadow stage-2 page tables to support a guest
: hypervisor. In the author's words:
:
: So here's the 10000m (approximately 30000ft for those of you stuck
: with the wrong units) view of what this is doing:
:
: - for each {VMID,VTTBR,VTCR} tuple the guest uses, we use a
: separate shadow s2_mmu context. This context has its own "real"
: VMID and a set of page tables that are the combination of the
: guest's S2 and the host S2, built dynamically one fault at a time.
:
: - these shadow S2 contexts are ephemeral, and behave exactly as
: TLBs. For all intent and purposes, they *are* TLBs, and we discard
: them pretty often.
:
: - TLB invalidation takes three possible paths:
:
: * either this is an EL2 S1 invalidation, and we directly emulate
: it as early as possible
:
: * or this is an EL1 S1 invalidation, and we need to apply it to
: the shadow S2s (plural!) that match the VMID set by the L1 guest
:
: * or finally, this is affecting S2, and we need to teardown the
: corresponding part of the shadow S2s, which invalidates the TLBs
KVM: arm64: nv: Truely enable nXS TLBI operations
KVM: arm64: nv: Add handling of NXS-flavoured TLBI operations
KVM: arm64: nv: Add handling of range-based TLBI operations
KVM: arm64: nv: Add handling of outer-shareable TLBI operations
KVM: arm64: nv: Invalidate TLBs based on shadow S2 TTL-like information
KVM: arm64: nv: Tag shadow S2 entries with guest's leaf S2 level
KVM: arm64: nv: Handle FEAT_TTL hinted TLB operations
KVM: arm64: nv: Handle TLBI IPAS2E1{,IS} operations
KVM: arm64: nv: Handle TLBI ALLE1{,IS} operations
KVM: arm64: nv: Handle TLBI VMALLS12E1{,IS} operations
KVM: arm64: nv: Handle TLB invalidation targeting L2 stage-1
KVM: arm64: nv: Handle EL2 Stage-1 TLB invalidation
KVM: arm64: nv: Add Stage-1 EL2 invalidation primitives
KVM: arm64: nv: Unmap/flush shadow stage 2 page tables
KVM: arm64: nv: Handle shadow stage 2 page faults
KVM: arm64: nv: Implement nested Stage-2 page table walk logic
KVM: arm64: nv: Support multiple nested Stage-2 mmu structures
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
* kvm-arm64/ffa-1p1:
: Improvements to the pKVM FF-A Proxy, courtesy of Sebastian Ene
:
: Various minor improvements to how host FF-A calls are proxied with the
: TEE, along with support for v1.1 of the protocol.
KVM: arm64: Use FF-A 1.1 with pKVM
KVM: arm64: Update the identification range for the FF-A smcs
KVM: arm64: Add support for FFA_PARTITION_INFO_GET
KVM: arm64: Trap FFA_VERSION host call in pKVM
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
* kvm-arm64/misc:
: Miscellaneous updates
:
: - Provide a command-line parameter to statically control the WFx trap
: selection in KVM
:
: - Make sysreg masks allocation accounted
Revert "KVM: arm64: nv: Fix RESx behaviour of disabled FGTs with negative polarity"
KVM: arm64: nv: Use GFP_KERNEL_ACCOUNT for sysreg_masks allocation
KVM: arm64: nv: Fix RESx behaviour of disabled FGTs with negative polarity
KVM: arm64: Add early_param to control WFx trapping
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
This reverts commit eb9d53d4a9.
As Marc pointed out on the list [*], this patch is wrong, and those who
find themselves in the SOB chain should have their heads checked.
Annoyingly, the architecture has some FGT trap bits that are negative
(i.e. 0 implies trap), and there was some confusion how KVM handles
this for nested guests. However, it is clear now that KVM honors the
RES0-ness of FGT traps already, meaning traps for features never exposed
to the guest hypervisor get handled at L0. As they should.
Link: https://lore.kernel.org/kvmarm/86bk3c3uss.wl-maz@kernel.org/T/#mb9abb3dd79f6a4544a91cb35676bd637c3a5e836
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Although we now have support for nXS-flavoured TLBI instructions,
we still don't expose the feature to the guest thanks to a mixture
of misleading comment and use of a bunch of magic values.
Fix the comment and correctly express the masking of LS64, which
is enough to expose nXS to the world. Not that anyone cares...
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240703154743.824824-1-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
commit 606af8293c ("KVM: selftests: arm64: Test vCPU-scoped feature ID
registers") intended to test that MPIDR_EL1 is unchanged across vCPU
reset but failed at actually doing so.
Add the missing assertion.
Link: https://lore.kernel.org/r/20240621225045.2472090-1-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Marc reports that L1 VMs aren't booting with the NV series applied to
today's kvmarm/next. After bisecting the issue, it appears that
44241f34fa ("KVM: arm64: nv: Use accessors for modifying ID
registers") is to blame.
Poking around at the issue a bit further, it'd appear that the value for
ID_AA64PFR0_EL1 is complete garbage, as 'val' still contains the value
we set ID_AA64ISAR1_EL1 to.
Fix the read-modify-write pattern to actually use ID_AA64PFR0_EL1 as the
starting point. Excuse me as I return to my shame cube.
Reported-by: Marc Zyngier <maz@kernel.org>
Fixes: 44241f34fa ("KVM: arm64: nv: Use accessors for modifying ID registers")
Acked-by: Marc Zyngier <maz@kernel.org>
Tested-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240621224044.2465901-1-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
The compiler implements kCFI by adding type information (u32) above
every function that might be indirectly called and, whenever a function
pointer is called, injects a read-and-compare of that u32 against the
value corresponding to the expected type. In case of a mismatch, a BRK
instruction gets executed. When the hypervisor triggers such an
exception in nVHE, it panics and triggers and exception return to EL1.
Therefore, teach nvhe_hyp_panic_handler() to detect kCFI errors from the
ESR and report them. If necessary, remind the user that EL2 kCFI is not
affected by CONFIG_CFI_PERMISSIVE.
Pass $(CC_FLAGS_CFI) to the compiler when building the nVHE hyp code.
Use SYM_TYPED_FUNC_START() for __pkvm_init_switch_pgd, as nVHE can't
call it directly and must use a PA function pointer from C (because it
is part of the idmap page), which would trigger a kCFI failure if the
type ID wasn't present.
Signed-off-by: Pierre-Clément Tosi <ptosi@google.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240610063244.2828978-9-ptosi@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Add a helper to display a panic banner soon to also be used for kCFI
failures, to ensure that we remain consistent.
Signed-off-by: Pierre-Clément Tosi <ptosi@google.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240610063244.2828978-8-ptosi@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
As it is already used in two places, move esr_comment() to a header for
re-use, with a clearer name.
Introduce esr_is_cfi_brk() to detect kCFI BRK syndromes, currently used
by early_brk64() but soon to also be used by hypervisor code.
Signed-off-by: Pierre-Clément Tosi <ptosi@google.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240610063244.2828978-7-ptosi@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Given that the sole purpose of __hyp_call_panic() is to call panic(), a
__noreturn function, give it the __noreturn attribute, removing the need
for its caller to use unreachable().
Signed-off-by: Pierre-Clément Tosi <ptosi@google.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240610063244.2828978-6-ptosi@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Ignore R_AARCH64_ABS32 relocations, instead of panicking, when emitting
the relocation table of the hypervisor. The toolchain might produce them
when generating function calls with kCFI to represent the 32-bit type ID
which can then be resolved across compilation units at link time. These
are NOT actual 32-bit addresses and are therefore not needed in the
final (runtime) relocation table (which is unlikely to use 32-bit
absolute addresses for arm64 anyway).
Signed-off-by: Pierre-Clément Tosi <ptosi@google.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240610063244.2828978-5-ptosi@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
The invalid_host_el2_vect macro is used by EL2{t,h} handlers in nVHE
*host* context, which should never run with a guest context loaded.
Therefore, remove the superfluous vCPU context check and branch
unconditionally to hyp_panic.
Signed-off-by: Pierre-Clément Tosi <ptosi@google.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240610063244.2828978-4-ptosi@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Fix the mismatch between the (incorrect) C signature, C call site, and
asm implementation by aligning all three on an API passing the
parameters (pgd and SP) separately, instead of as a bundled struct.
Remove the now unnecessary memory accesses while the MMU is off from the
asm, which simplifies the C caller (as it does not need to convert a VA
struct pointer to PA) and makes the code slightly more robust by
offsetting the struct fields from C and properly expressing the call to
the C compiler (e.g. type checker and kCFI).
Fixes: f320bc742b ("KVM: arm64: Prepare the creation of s1 mappings at EL2")
Signed-off-by: Pierre-Clément Tosi <ptosi@google.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240610063244.2828978-3-ptosi@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
When the hypervisor receives a SError or synchronous exception (EL2h)
while running with the __kvm_hyp_vector and if ELR_EL2 doesn't point to
an extable entry, it panics indirectly by overwriting ELR with the
address of a panic handler in order for the asm routine it returns to to
ERET into the handler.
However, this clobbers ELR_EL2 for the handler itself. As a result,
hyp_panic(), when retrieving what it believes to be the PC where the
exception happened, actually ends up reading the address of the panic
handler that called it! This results in an erroneous and confusing panic
message where the source of any synchronous exception (e.g. BUG() or
kCFI) appears to be __guest_exit_panic, making it hard to locate the
actual BRK instruction.
Therefore, store the original ELR_EL2 in the per-CPU kvm_hyp_ctxt and
point the sysreg to a routine that first restores it to its previous
value before running __guest_exit_panic.
Fixes: 7db2153047 ("KVM: arm64: Restore hyp when panicking in guest context")
Signed-off-by: Pierre-Clément Tosi <ptosi@google.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240610063244.2828978-2-ptosi@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Test that CTR_EL0 is modifiable from userspace, that changes are
visible to guests, and that they are preserved across a vCPU reset.
Signed-off-by: Sebastian Ott <sebott@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/20240619174036.483943-11-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Invariant system id registers are populated with host values
at initialization time using their .reset function cb.
These are currently called get_* which is usually used by
the functions implementing the .get_user callback.
Change their function names to reset_* to reflect what they
are used for.
Signed-off-by: Sebastian Ott <sebott@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/20240619174036.483943-10-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Instead of using ~0UL provide the actual writable mask for
non-id feature registers in the output of the
KVM_ARM_GET_REG_WRITABLE_MASKS ioctl.
This changes the mask for the CTR_EL0 and CLIDR_EL1 registers.
Signed-off-by: Sebastian Ott <sebott@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/20240619174036.483943-9-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
CTR_EL0 is currently handled as an invariant register, thus
guests will be presented with the host value of that register.
Add emulation for CTR_EL0 based on a per VM value. Userspace can
switch off DIC and IDC bits and reduce DminLine and IminLine sizes.
Naturally, ensure CTR_EL0 is trapped (HCR_EL2.TID2=1) any time that a
VM's CTR_EL0 differs from hardware.
Signed-off-by: Sebastian Ott <sebott@redhat.com>
Reviewed-by: Shaoqin Huang <shahuang@redhat.com>
Link: https://lore.kernel.org/r/20240619174036.483943-8-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
There are 2 functions to calculate traps via HCR_EL2:
* kvm_init_sysreg() called via KVM_RUN (before the 1st run or when
the pid changes)
* vcpu_reset_hcr() called via KVM_ARM_VCPU_INIT
To unify these 2 and to support traps that are dependent on the
ID register configuration, move the code from vcpu_reset_hcr()
to sys_regs.c and call it via kvm_init_sysreg().
We still have to keep the non-FWB handling stuff in vcpu_reset_hcr().
Also the initialization with HCR_GUEST_FLAGS is kept there but guarded
by !vcpu_has_run_once() to ensure that previous calculated values
don't get overwritten.
While at it rename kvm_init_sysreg() to kvm_calculate_traps() to
better reflect what it's doing.
Signed-off-by: Sebastian Ott <sebott@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/20240619174036.483943-7-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
In the interest of abstracting away the underlying storage of feature
ID registers, rework the nested code to go through the accessors instead
of directly iterating the id_regs array.
This means we now lose the property that ID registers unknown to the
nested code get zeroed, but we really ought to be handling those
explicitly going forward.
Link: https://lore.kernel.org/r/20240619174036.483943-6-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Replace the remaining usage of IDREG() with a new helper for setting the
value of a feature ID register, with the benefit of cramming in some
extra sanity checks.
Reviewed-by: Sebastian Ott <sebott@redhat.com>
Link: https://lore.kernel.org/r/20240619174036.483943-5-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
IDREG() expands to the storage of a particular ID reg, which can be
useful for handling both reads and writes. However, outside of a select
few situations, the ID registers should be considered read only.
Replace current readers with a new macro that expands to the value of
the field rather than the field itself.
Reviewed-by: Sebastian Ott <sebott@redhat.com>
Link: https://lore.kernel.org/r/20240619174036.483943-4-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
CTR_EL0 complicates the existing scheme for iterating feature ID
registers, as it is not in the contiguous range that we presently
support. Just search the sysreg table for the Nth feature ID register in
anticipation of this. Yes, the debugfs interface has quadratic time
completixy now. Boo hoo.
Reviewed-by: Sebastian Ott <sebott@redhat.com>
Link: https://lore.kernel.org/r/20240619174036.483943-3-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
KVM is about to add support for more VM-scoped feature ID regs that
live outside of the id_regs[] array, which means the index of the
debugfs iterator may not actually be an index into the array.
Prepare by getting the sys_reg encoding from the descriptor itself.
Reviewed-by: Sebastian Ott <sebott@redhat.com>
Link: https://lore.kernel.org/r/20240619174036.483943-2-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Of course, userspace is in the driver's seat for struct kvm and
associated allocations. Make sure the sysreg_masks allocation
participates in kmem accounting.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240617181018.2054332-1-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Latest kid on the block: NXS (Non-eXtra-Slow) TLBI operations.
Let's add those in bulk (NSH, ISH, OSH, both normal and range)
as they directly map to their XS (the standard ones) counterparts.
Not a lot to say about them, they are basically useless.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240614144552.2773592-17-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
We already support some form of range operation by handling FEAT_TTL,
but so far the "arbitrary" range operations are unsupported.
Let's fix that.
For EL2 S1, this is simple enough: we just map both NSH, ISH and OSH
instructions onto the ISH version for EL1.
For TLBI instructions affecting EL1 S1, we use the same model as
their non-range counterpart to invalidate in the context of the
correct VMID.
For TLBI instructions affecting S2, we interpret the data passed
by the guest to compute the range and use that to tear-down part
of the shadow S2 range and invalidate the TLBs.
Finally, we advertise FEAT_TLBIRANGE if the host supports it.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240614144552.2773592-16-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Our handling of outer-shareable TLBIs is pretty basic: we just
map them to the existing inner-shareable ones, because we really
don't have anything else.
The only significant change is that we can now advertise FEAT_TLBIOS
support if the host supports it.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240614144552.2773592-15-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
In order to be able to make S2 TLB invalidations more performant on NV,
let's use a scheme derived from the FEAT_TTL extension.
If bits [56:55] in the leaf descriptor translating the address in the
corresponding shadow S2 are non-zero, they indicate a level which can
be used as an invalidation range. This allows further reduction of the
systematic over-invalidation that takes place otherwise.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240614144552.2773592-14-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Populate bits [56:55] of the leaf entry with the level provided
by the guest's S2 translation. This will allow us to better scope
the invalidation by remembering the mapping size.
Of course, this assume that the guest will issue an invalidation
with an address that falls into the same leaf. If the guest doesn't,
we'll over-invalidate.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240614144552.2773592-13-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Support guest-provided information information to size the range of
required invalidation. This helps with reducing over-invalidation,
provided that the guest actually provides accurate information.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240614144552.2773592-12-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
TLBI IPAS2E1* are the last class of TLBI instructions we need
to handle. For each matching S2 MMU context, we invalidate a
range corresponding to the largest possible mapping for that
context.
At this stage, we don't handle TTL, which means we are likely
over-invalidating. Further patches will aim at making this
a bit better.
Co-developed-by: Jintack Lim <jintack.lim@linaro.org>
Co-developed-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Jintack Lim <jintack.lim@linaro.org>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240614144552.2773592-11-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
TLBI ALLE1* is a pretty big hammer that invalides all S1/S2 TLBs.
This translates into the unmapping of all our shadow S2 PTs, itself
resulting in the corresponding TLB invalidations.
Co-developed-by: Jintack Lim <jintack.lim@linaro.org>
Co-developed-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Jintack Lim <jintack.lim@linaro.org>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240614144552.2773592-10-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Emulating TLBI VMALLS12E1* results in tearing down all the shadow
S2 PTs that match the current VMID, since our shadow S2s are just
some form of SW-managed TLBs. That teardown itself results in a
full TLB invalidation for both S1 and S2.
This can result in over-invalidation if two vcpus use the same VMID
to tag private S2 PTs, but this is still correct from an architecture
perspective.
Co-developed-by: Jintack Lim <jintack.lim@linaro.org>
Co-developed-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Jintack Lim <jintack.lim@linaro.org>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240614144552.2773592-9-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
While dealing with TLB invalidation targeting the guest hypervisor's
own stage-1 was easy, doing the same thing for its own guests is
a bit more involved.
Since such an invalidation is scoped by VMID, it needs to apply to
all s2_mmu contexts that have been tagged by that VMID, irrespective
of the value of VTTBR_EL2.BADDR.
So for each s2_mmu context matching that VMID, we invalidate the
corresponding TLBs, each context having its own "physical" VMID.
Co-developed-by: Jintack Lim <jintack.lim@linaro.org>
Co-developed-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Jintack Lim <jintack.lim@linaro.org>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240614144552.2773592-8-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Due to the way FEAT_NV2 suppresses traps when accessing EL2
system registers, we can't track when the guest changes its
HCR_EL2.TGE setting. This means we always trap EL1 TLBIs,
even if they don't affect any L2 guest.
Given that invalidating the EL2 TLBs doesn't require any messing
with the shadow stage-2 page-tables, we can simply emulate the
instructions early and return directly to the guest.
This is conditioned on the instruction being an EL1 one and
the guest's HCR_EL2.{E2H,TGE} being {1,1} (indicating that
the instruction targets the EL2 S1 TLBs), or the instruction
being one of the EL2 ones (which are not ambiguous).
EL1 TLBIs issued with HCR_EL2.{E2H,TGE}={1,0} are not handled
here, and cause a full exit so that they can be handled in
the context of a VMID.
Co-developed-by: Jintack Lim <jintack.lim@linaro.org>
Co-developed-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Jintack Lim <jintack.lim@linaro.org>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240614144552.2773592-7-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Provide the primitives required to handle TLB invalidation for
Stage-1 EL2 TLBs, which by definition do not require messing
with the Stage-2 page tables.
Co-developed-by: Jintack Lim <jintack.lim@linaro.org>
Co-developed-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Jintack Lim <jintack.lim@linaro.org>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240614144552.2773592-6-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Unmap/flush shadow stage 2 page tables for the nested VMs as well as the
stage 2 page table for the guest hypervisor.
Note: A bunch of the code in mmu.c relating to MMU notifiers is
currently dealt with in an extremely abrupt way, for example by clearing
out an entire shadow stage-2 table. This will be handled in a more
efficient way using the reverse mapping feature in a later version of
the patch series.
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Jintack Lim <jintack.lim@linaro.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240614144552.2773592-5-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
If we are faulting on a shadow stage 2 translation, we first walk the
guest hypervisor's stage 2 page table to see if it has a mapping. If
not, we inject a stage 2 page fault to the virtual EL2. Otherwise, we
create a mapping in the shadow stage 2 page table.
Note that we have to deal with two IPAs when we got a shadow stage 2
page fault. One is the address we faulted on, and is in the L2 guest
phys space. The other is from the guest stage-2 page table walk, and is
in the L1 guest phys space. To differentiate them, we rename variables
so that fault_ipa is used for the former and ipa is used for the latter.
When mapping a page in a shadow stage-2, special care must be taken not
to be more permissive than the guest is.
Co-developed-by: Christoffer Dall <christoffer.dall@linaro.org>
Co-developed-by: Jintack Lim <jintack.lim@linaro.org>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Jintack Lim <jintack.lim@linaro.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240614144552.2773592-4-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Based on the pseudo-code in the ARM ARM, implement a stage 2 software
page table walker.
Co-developed-by: Jintack Lim <jintack.lim@linaro.org>
Signed-off-by: Jintack Lim <jintack.lim@linaro.org>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240614144552.2773592-3-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Add Stage-2 mmu data structures for virtual EL2 and for nested guests.
We don't yet populate shadow Stage-2 page tables, but we now have a
framework for getting to a shadow Stage-2 pgd.
We allocate twice the number of vcpus as Stage-2 mmu structures because
that's sufficient for each vcpu running two translation regimes without
having to flush the Stage-2 page tables.
Co-developed-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240614144552.2773592-2-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Now that the layout of the structures is compatible with 1.1 it is time
to probe the 1.1 version of the FF-A protocol inside the hypervisor. If
the TEE doesn't support it, it should return the minimum supported
version.
Signed-off-by: Sebastian Ene <sebastianene@google.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240613132035.1070360-5-sebastianene@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
The FF-A spec 1.2 reserves the following ranges for identifying FF-A
calls:
0x84000060-0x840000FF: FF-A 32-bit calls
0xC4000060-0xC40000FF: FF-A 64-bit calls.
Use the range identification according to the spec and allow calls that
are currently out of the range(eg. FFA_MSG_SEND_DIRECT_REQ2) to be
identified correctly.
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Sebastian Ene <sebastianene@google.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240613132035.1070360-4-sebastianene@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Handle the FFA_PARTITION_INFO_GET host call inside the pKVM hypervisor
and copy the response message back to the host buffers.
Signed-off-by: Sebastian Ene <sebastianene@google.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240613132035.1070360-3-sebastianene@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
The pKVM hypervisor initializes with FF-A version 1.0. The spec requires
that no other FF-A calls to be issued before the version negotiation
phase is complete. Split the hypervisor proxy initialization code in two
parts so that we can move the later one after the host negotiates its
version.
Without trapping the call, the host drivers can negotiate a higher
version number with TEE which can result in a different memory layout
described during the memory sharing calls.
Signed-off-by: Sebastian Ene <sebastianene@google.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240613132035.1070360-2-sebastianene@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
The Fine Grained Trap extension is pretty messy as it doesn't
consistently use the same polarity for all trap bits. A bunch
of them, added later in the life of the architecture, have a
*negative* priority.
So if these bits are disabled, they must be RES1 and not RES0.
But that's not what the code implements, making the traps for
these negative trap bits being always on instead of disabled.
Fix the relevant bits, and stick a brown paper bag on my head
for the rest of the day...
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240614125858.78361-1-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Add an early_params to control WFI and WFE trapping. This is to
control the degree guests can wait for interrupts on their own without
being trapped by KVM. Options for each param are trap and notrap. trap
enables the trap. notrap disables the trap. Note that when enabled,
traps are allowed but not guaranteed by the CPU architecture. Absent
an explicitly set policy, default to current behavior: disabling the
trap if only a single task is running and enabling otherwise.
Signed-off-by: Colton Lewis <coltonlewis@google.com>
Reviewed-by: Jing Zhang <jingzhangos@google.com>
Link: https://lore.kernel.org/r/20240523174056.1565133-1-coltonlewis@google.com
[ oliver: rework kvm_vcpu_should_clear_tw*() for readability ]
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
