commit 18eb77c75e upstream.
Resolve kernel panic while accessing IRQ handler associated with the
generated IRQ. This is done by acquiring the spinlock and storing the
current interrupt state before handling the interrupt request using
generic_handle_irq.
A previous fix patch was submitted where 'generic_handle_irq' was
replaced with 'handle_nested_irq'. However, this change also causes
the kernel panic where after determining which GPIO triggered the
interrupt and attempting to call handle_nested_irq with the mapped
IRQ number, leads to a failure in locating the registered handler.
Fixes: 194f9f94a5 ("misc: microchip: pci1xxxx: Resolve kernel panic during GPIO IRQ handling")
Cc: stable <stable@kernel.org>
Signed-off-by: Rengarajan S <rengarajan.s@microchip.com>
Link: https://lore.kernel.org/r/20250313170856.20868-2-rengarajan.s@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c876be906c upstream.
register_chrdev will only register the first 256 minors of a major chrdev.
That means that dynamically allocated misc devices with minor above 255
will fail to open with -ENXIO.
This was found by kernel test robot when testing a different change that
makes all dynamically allocated minors be above 255. This has, however,
been separately tested by creating 256 serio_raw devices with the help of
userio driver.
Ever since allowing misc devices with minors above 128, this has been
possible.
Fix it by registering all minor numbers from 0 to MINORMASK + 1 for
MISC_MAJOR.
Reported-by: kernel test robot <oliver.sang@intel.com>
Cc: stable <stable@kernel.org>
Closes: https://lore.kernel.org/oe-lkp/202503171507.6c8093d0-lkp@intel.com
Fixes: ab760791c0 ("char: misc: Increase the maximum number of dynamic misc devices to 1048448")
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Tested-by: Hou Wenlong <houwenlong.hwl@antgroup.com>
Link: https://lore.kernel.org/r/20250317-misc-chrdev-v1-1-6cd05da11aef@igalia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f1fb088d9c upstream.
Take irqfds.lock when adding/deleting an IRQ bypass producer to ensure
irqfd->producer isn't modified while kvm_irq_routing_update() is running.
The only lock held when a producer is added/removed is irqbypass's mutex.
Fixes: 8727688006 ("KVM: x86: select IRQ_BYPASS_MANAGER")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20250404193923.1413163-5-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9bcac97dc4 upstream.
Restore an IRTE back to host control (remapped or posted MSI mode) if the
*new* GSI route prevents posting the IRQ directly to a vCPU, regardless of
the GSI routing type. Updating the IRTE if and only if the new GSI is an
MSI results in KVM leaving an IRTE posting to a vCPU.
The dangling IRTE can result in interrupts being incorrectly delivered to
the guest, and in the worst case scenario can result in use-after-free,
e.g. if the VM is torn down, but the underlying host IRQ isn't freed.
Fixes: efc644048e ("KVM: x86: Update IRTE for posted-interrupts")
Fixes: 411b44ba80 ("svm: Implements update_pi_irte hook to setup posted interrupt")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20250404193923.1413163-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bcda70c56f upstream.
Explicitly treat type differences as GSI routing changes, as comparing MSI
data between two entries could get a false negative, e.g. if userspace
changed the type but left the type-specific data as-is.
Fixes: 515a0c79e7 ("kvm: irqfd: avoid update unmodified entries of the routing")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20250404193923.1413163-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 00f1cc14da upstream.
gcc 15 honors the __counted_by(len) attribute on vsc_tp_packet.buf[]
and the vsc-tp.c code is using this in a wrong way. len does not contain
the available size in the buffer, it contains the actual packet length
*without* the crc. So as soon as vsc_tp_xfer() tries to add the crc to
buf[] the fortify-panic handler gets triggered:
[ 80.842193] memcpy: detected buffer overflow: 4 byte write of buffer size 0
[ 80.842243] WARNING: CPU: 4 PID: 272 at lib/string_helpers.c:1032 __fortify_report+0x45/0x50
...
[ 80.843175] __fortify_panic+0x9/0xb
[ 80.843186] vsc_tp_xfer.cold+0x67/0x67 [mei_vsc_hw]
[ 80.843210] ? seqcount_lockdep_reader_access.constprop.0+0x82/0x90
[ 80.843229] ? lockdep_hardirqs_on+0x7c/0x110
[ 80.843250] mei_vsc_hw_start+0x98/0x120 [mei_vsc]
[ 80.843270] mei_reset+0x11d/0x420 [mei]
The easiest fix would be to just drop the counted-by but with the exception
of the ack buffer in vsc_tp_xfer_helper() which only contains enough room
for the packet-header, all other uses of vsc_tp_packet always use a buffer
of VSC_TP_MAX_XFER_SIZE bytes for the packet.
Instead of just dropping the counted-by, split the vsc_tp_packet struct
definition into a header and a full-packet definition and use a fixed
size buf[] in the packet definition, this way fortify-source buffer
overrun checking still works when enabled.
Fixes: 566f5ca976 ("mei: Add transport driver for IVSC device")
Cc: stable@kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Alexander Usyskin <alexander.usyskin@intel.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://lore.kernel.org/r/20250318141203.94342-2-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 14a3cc7558 upstream.
With ATA devices supporting the CDL feature, using CDL requires that the
feature be enabled with a SET FEATURES command. This command is issued
as the translated command for the MODE SELECT command issued by
scsi_cdl_enable() when the user enables CDL through the device
cdl_enable sysfs attribute.
However, the implementation of scsi_cdl_enable() always issues a MODE
SELECT command for ATA devices when the enable argument is true, even if
CDL is already enabled on the device. While this does not cause any
issue with using CDL descriptors with read/write commands (the CDL
feature will be enabled on the drive), issuing the MODE SELECT command
even when the device CDL feature is already enabled will cause a reset
of the ATA device CDL statistics log page (as defined in ACS, any CDL
enable action must reset the device statistics).
Avoid this needless actions (and the implied statistics log page reset)
by modifying scsi_cdl_enable() to issue the MODE SELECT command to
enable CDL if and only if CDL is not reported as already enabled on the
device.
And while at it, simplify the initialization of the is_ata boolean
variable and move the declaration of the scsi mode data and sense header
variables to within the scope of ATA device handling.
Fixes: 1b22cfb141 ("scsi: core: Allow enabling and disabling command duration limits")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9ab75eee1a upstream.
Version 1.60 specifically needs this quirk.
Version 2.00 is known good.
Cc: stable <stable@kernel.org>
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/r/20250403180004.343133-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 88474ad734 upstream.
For the ATA features subpage of the control mode page, the T10 SAT-6
specifications state that:
For a MODE SENSE command, the SATL shall return the CDL_CTRL field value
that was last set by an application client.
However, the function ata_msense_control_ata_feature() always sets the
CDL_CTRL field to the 0x02 value to indicate support for the CDL T2A and
T2B pages. This is thus incorrect and the value 0x02 must be reported
only after the user enables the CDL feature, which is indicated with the
ATA_DFLAG_CDL_ENABLED device flag. When this flag is not set, the
CDL_CTRL field of the ATA feature subpage of the control mode page must
report a value of 0x00.
Fix ata_msense_control_ata_feature() to report the correct values for
the CDL_CTRL field, according to the enable/disable state of the device
CDL feature.
Fixes: df60f9c645 ("scsi: ata: libata: Add ATA feature control sub-page translation")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit db91586b1e upstream.
The function ata_mselect_control_ata_feature() has a return type defined
as unsigned int but this function may return negative error codes, which
are correctly propagated up the call chain as integers.
Fix ata_mselect_control_ata_feature() to have the correct int return
type.
While at it, also fix a typo in this function description comment.
Fixes: df60f9c645 ("scsi: ata: libata: Add ATA feature control sub-page translation")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 17e897a456 upstream.
With ATA devices supporting the CDL feature, using CDL requires that the
feature be enabled with a SET FEATURES command. This command is issued
as the translated command for the MODE SELECT command issued by
scsi_cdl_enable() when the user enables CDL through the device
cdl_enable sysfs attribute.
Currently, ata_mselect_control_ata_feature() always translates a MODE
SELECT command for the ATA features subpage of the control mode page to
a SET FEATURES command to enable or disable CDL based on the cdl_ctrl
field. However, there is no need to issue the SET FEATURES command if:
1) The MODE SELECT command requests disabling CDL and CDL is already
disabled.
2) The MODE SELECT command requests enabling CDL and CDL is already
enabled.
Fix ata_mselect_control_ata_feature() to issue the SET FEATURES command
only when necessary. Since enabling CDL also implies a reset of the CDL
statistics log page, avoiding useless CDL enable operations also avoids
clearing the CDL statistics log.
Also add debug messages to clearly signal when CDL is being enabled or
disabled using a SET FEATURES command.
Fixes: df60f9c645 ("scsi: ata: libata: Add ATA feature control sub-page translation")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7c7f1bfdb2 upstream.
In chameleon_parse_gdd(), if mcb_device_register() fails, 'mdev'
would be released in mcb_device_register() via put_device().
Thus, goto 'err' label and free 'mdev' again causes a double free.
Just return if mcb_device_register() fails.
Fixes: 3764e82e51 ("drivers: Introduce MEN Chameleon Bus")
Cc: stable <stable@kernel.org>
Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com>
Signed-off-by: Johannes Thumshirn <jth@kernel.org>
Link: https://lore.kernel.org/r/6201d09e2975ae5789879f79a6de4c38de9edd4a.1741596225.git.jth@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 078d3ee7c1 upstream.
According to CXL r3.2 section 8.2.1.2, the PCI_COMMAND register fields,
including Memory Space Enable bit, have no effect on the behavior of an
RCD Upstream Port. Retaining this check may incorrectly cause
cxl_pci_probe() to fail on a valid RCD upstream Port.
While the specification is explicit only for RCD Upstream Ports, this
check is solely for accessing the RCRB, which is always mapped through
memory space. Therefore, its safe to remove the check entirely. In
practice, firmware reliably enables the Memory Space Enable bit for
RCH Downstream Ports and no failures have been observed.
Removing the check simplifies the code and avoids unnecessary
special-casing, while relying on BIOS/firmware to configure devices
correctly. Moreover, any failures due to inaccessible RCRB regions
will still be caught either in __rcrb_to_component() or while
parsing the component register block.
The following failure was observed in dmesg when the check was present:
cxl_pci 0000:7f:00.0: No component registers (-6)
Fixes: d5b1a27143 ("cxl/acpi: Extract component registers of restricted hosts from RCRB")
Signed-off-by: Smita Koralahalli <Smita.KoralahalliChannabasappa@amd.com>
Cc: <stable@vger.kernel.org>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Terry Bowman <terry.bowman@amd.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Robert Richter <rrichter@amd.com>
Link: https://patch.msgid.link/20250407192734.70631-1-Smita.KoralahalliChannabasappa@amd.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7537deda36 upstream.
Allocate SVM's interrupt remapping metadata using GFP_ATOMIC as
svm_ir_list_add() is called with IRQs are disabled and irqfs.lock held
when kvm_irq_routing_update() reacts to GSI routing changes.
Fixes: 411b44ba80 ("svm: Implements update_pi_irte hook to setup posted interrupt")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20250404193923.1413163-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit edd43f4d6f upstream.
A previous commit added a 'sync' parameter to io_fallback_tw(), which if
true, means the caller wants to wait on the fallback thread handling it.
But the logic is somewhat messed up, ensure that ctxs are swapped and
flushed appropriately.
Cc: stable@vger.kernel.org
Fixes: dfbe5561ae ("io_uring: flush offloaded and delayed task_work on exit")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5add0dbbeb upstream.
In function kvm_pre_enter_guest(), it prepares to enter guest and check
whether there are pending signals or events. And it will not enter guest
if there are, PMU pass-through preparation for guest should be cancelled
and host should own PMU hardware.
Cc: stable@vger.kernel.org
Fixes: f4e40ea9f7 ("LoongArch: KVM: Add PMU support for guest")
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9ea86232a5 upstream.
Some registers such as LOONGARCH_CSR_ESTAT and LOONGARCH_CSR_GINTC are
partly cleared with function _kvm_setcsr(). This comes from the hardware
specification, some bits are read only in VM mode, and however they can
be written in host mode. So they are partly cleared in VM mode, and can
be fully cleared in host mode.
These read only bits show pending interrupt or exception status. When VM
reset, the read-only bits should be cleared, otherwise vCPU will receive
unknown interrupts in boot stage.
Here registers LOONGARCH_CSR_ESTAT/LOONGARCH_CSR_GINTC are fully cleared
in ioctl KVM_REG_LOONGARCH_VCPU_RESET vCPU reset path.
Cc: stable@vger.kernel.org
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c37325cbd9 upstream.
Remove dead code. LoongArch does not have a DMA memory zone (24bit DMA).
The architecture does not even define MAX_DMA_PFN.
Cc: stable@vger.kernel.org
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Signed-off-by: Petr Tesarik <ptesarik@suse.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bd51834d1c upstream.
LoongArch's huge_pte_offset() currently returns a pointer to a PMD slot
even if the underlying entry points to invalid_pte_table (indicating no
mapping). Callers like smaps_hugetlb_range() fetch this invalid entry
value (the address of invalid_pte_table) via this pointer.
The generic is_swap_pte() check then incorrectly identifies this address
as a swap entry on LoongArch, because it satisfies the "!pte_present()
&& !pte_none()" conditions. This misinterpretation, combined with a
coincidental match by is_migration_entry() on the address bits, leads to
kernel crashes in pfn_swap_entry_to_page().
Fix this at the architecture level by modifying huge_pte_offset() to
check the PMD entry's content using pmd_none() before returning. If the
entry is invalid (i.e., it points to invalid_pte_table), return NULL
instead of the pointer to the slot.
Cc: stable@vger.kernel.org
Acked-by: Peter Xu <peterx@redhat.com>
Co-developed-by: Hongchen Zhang <zhanghongchen@loongson.cn>
Signed-off-by: Hongchen Zhang <zhanghongchen@loongson.cn>
Signed-off-by: Ming Wang <wangming01@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2ef174b133 upstream.
Like the other relevant symbols, export some fp, lsx, lasx and lbt
assembly symbols and put the function declarations in header files
rather than source files.
While at it, use "asmlinkage" for the other existing C prototypes
of assembly functions and also do not use the "extern" keyword with
function declarations according to the document coding-style.rst.
Cc: stable@vger.kernel.org # 6.6+
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3318dc299b upstream.
With ACPI in place, gicv2m_get_fwnode() is registered with the pci
subsystem as pci_msi_get_fwnode_cb(), which may get invoked at runtime
during a PCI host bridge probe. But, the call back is wrongly marked as
__init, causing it to be freed, while being registered with the PCI
subsystem and could trigger:
Unable to handle kernel paging request at virtual address ffff8000816c0400
gicv2m_get_fwnode+0x0/0x58 (P)
pci_set_bus_msi_domain+0x74/0x88
pci_register_host_bridge+0x194/0x548
This is easily reproducible on a Juno board with ACPI boot.
Retain the function for later use.
Fixes: 0644b3daca ("irqchip/gic-v2m: acpi: Introducing GICv2m ACPI support")
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 85fd85bc02 upstream.
insn_decoder_test found a problem with decoding APX CTEST instructions:
Found an x86 instruction decoder bug, please report this.
ffffffff810021df 62 54 94 05 85 ff ctestneq
objdump says 6 bytes, but insn_get_length() says 5
It happens because x86-opcode-map.txt doesn't specify arguments for the
instruction and the decoder doesn't expect to see ModRM byte.
Fixes: 690ca3a306 ("x86/insn: Add support for APX EVEX instructions to the opcode map")
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org # v6.10+
Link: https://lore.kernel.org/r/20250423065815.2003231-1-kirill.shutemov@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 67fe574651 upstream.
[Why]
While system undergoing gpu reset always do full update
to sync the dc state before and after reset.
[How]
Return true in should_reset_plane() if gpu reset detected
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 2ba8619b9a)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7eb287beeb upstream.
[Why]
The indexing of stream_status in dm_gpureset_commit_state() is incorrect.
That leads to asserts in multi-display configuration after gpu reset.
[How]
Adjust the indexing logic to align stream_status with surface_updates.
Fixes: cdaae8371a ("drm/amd/display: Handle GPU reset for DC block")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3808
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit d91bc90139)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 095c8e61f4 upstream.
commit a8972d5a49 ("drm: panel: jd9365da-h3: fix reset signal polarity")
fixed reset signal polarity in jadard_dsi_probe() and jadard_prepare().
It was not done in jadard_unprepare() because of an incorrect assumption
about reset line handling in power off mode. After looking into the
datasheet, it now appears that before disabling regulators, the reset line
is deasserted first, and if reset_before_power_off_vcioo is true, then the
reset line is asserted.
Fix reset polarity by inverting gpiod_set_value() second argument in
in jadard_unprepare().
Fixes: 6b818c533d ("drm: panel: Add Jadard JD9365DA-H3 DSI panel")
Fixes: 2b976ad760 ("drm/panel: jd9365da: Support for kd101ne3-40ti MIPI-DSI panel")
Fixes: a8972d5a49 ("drm: panel: jd9365da-h3: fix reset signal polarity")
Cc: stable@vger.kernel.org
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250417195507.778731-1-hugo@hugovil.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250417195507.778731-1-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 53bd978016 upstream.
The `FwFunc` struct contains an function with a char pointer argument,
for which a `*const u8` pointer was used. This is not really the
"proper" type for this, so use a `*const kernel::ffi::c_char` pointer
instead.
This has no real functionality changes, since now `kernel::ffi::c_char`
(which bindgen uses for `char`) is now a type alias to `u8` anyways,
but before commit 1bae8729e5 ("rust: map `long` to `isize` and `char`
to `u8`") the concrete type of `kernel::ffi::c_char` depended on the
architecture (However all supported architectures at the time mapped to
`i8`).
This caused problems on the v6.13 tag when building for 32 bit arm (with
my patches), since back then `*const i8` was used in the function
argument and the function that bindgen generated used
`*const core::ffi::c_char` which Rust mapped to `*const u8` on 32 bit
arm. The stable v6.13.y branch does not have this issue since commit
1bae8729e5 ("rust: map `long` to `isize` and `char` to `u8`") was
backported.
This caused the following build error:
```
error[E0308]: mismatched types
--> rust/kernel/firmware.rs:20:4
|
20 | Self(bindings::request_firmware)
| ---- ^^^^^^^^^^^^^^^^^^^^^^^^^^ expected fn pointer, found fn item
| |
| arguments to this function are incorrect
|
= note: expected fn pointer `unsafe extern "C" fn(_, *const i8, _) -> _`
found fn item `unsafe extern "C" fn(_, *const u8, _) -> _ {request_firmware}`
note: tuple struct defined here
--> rust/kernel/firmware.rs:14:8
|
14 | struct FwFunc(
| ^^^^^^
error[E0308]: mismatched types
--> rust/kernel/firmware.rs:24:14
|
24 | Self(bindings::firmware_request_nowarn)
| ---- ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ expected fn pointer, found fn item
| |
| arguments to this function are incorrect
|
= note: expected fn pointer `unsafe extern "C" fn(_, *const i8, _) -> _`
found fn item `unsafe extern "C" fn(_, *const u8, _) -> _ {firmware_request_nowarn}`
note: tuple struct defined here
--> rust/kernel/firmware.rs:14:8
|
14 | struct FwFunc(
| ^^^^^^
error[E0308]: mismatched types
--> rust/kernel/firmware.rs:64:45
|
64 | let ret = unsafe { func.0(pfw as _, name.as_char_ptr(), dev.as_raw()) };
| ------ ^^^^^^^^^^^^^^^^^^ expected `*const i8`, found `*const u8`
| |
| arguments to this function are incorrect
|
= note: expected raw pointer `*const i8`
found raw pointer `*const u8`
error: aborting due to 3 previous errors
```
Fixes: de6582833d ("rust: add firmware abstractions")
Cc: stable@vger.kernel.org
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Signed-off-by: Christian Schrefl <chrisi.schrefl@gmail.com>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://lore.kernel.org/r/20250413-rust_arm_fix_fw_abstaction-v3-1-8dd7c0bbcd47@gmail.com
[ Add firmware prefix to commit subject. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cdd445258d upstream.
Commit 199510e33d ("scsi: mpi3mr: Update consumer index of reply
queues after every 100 replies") introduced a regression with the
per-reply queue pending I/O counter which was erroneously decremented,
leading to the counter going negative.
Drop the incorrect atomic decrement for the pending I/O counter.
Fixes: 199510e33d ("scsi: mpi3mr: Update consumer index of reply queues after every 100 replies")
Cc: stable@vger.kernel.org
Co-developed-by: Sathya Prakash <sathya.prakash@broadcom.com>
Signed-off-by: Sathya Prakash <sathya.prakash@broadcom.com>
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://lore.kernel.org/r/20250411111419.135485-2-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 30a41ed32d upstream.
With lan88xx based devices the lan78xx driver can get stuck in an
interrupt loop while bringing the device up, flooding the kernel log
with messages like the following:
lan78xx 2-3:1.0 enp1s0u3: kevent 4 may have been dropped
Removing interrupt support from the lan88xx PHY driver forces the
driver to use polling instead, which avoids the problem.
The issue has been observed with Raspberry Pi devices at least since
4.14 (see [1], bug report for their downstream kernel), as well as
with Nvidia devices [2] in 2020, where disabling interrupts was the
vendor-suggested workaround (together with the claim that phylib
changes in 4.9 made the interrupt handling in lan78xx incompatible).
Iperf reports well over 900Mbits/sec per direction with client in
--dualtest mode, so there does not seem to be a significant impact on
throughput (lan88xx device connected via switch to the peer).
[1] https://github.com/raspberrypi/linux/issues/2447
[2] https://forums.developer.nvidia.com/t/jetson-xavier-and-lan7800-problem/142134/11
Link: https://lore.kernel.org/0901d90d-3f20-4a10-b680-9c978e04ddda@lunn.ch
Fixes: 792aec47d5 ("add microchip LAN88xx phy driver")
Signed-off-by: Fiona Klute <fiona.klute@gmx.de>
Cc: kernel-list@raspberrypi.com
Cc: stable@vger.kernel.org
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250416102413.30654-1-fiona.klute@gmx.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9e8d1013b0 upstream.
Zero-initialize TCP header via memset() to avoid garbage values that
may affect checksum or behavior during test transmission.
Also zero-fill allocated payload and padding regions using memset()
after skb_put(), ensuring deterministic content for all outgoing
test packets.
Fixes: 3e1e58d64c ("net: add generic selftest support")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Cc: stable@vger.kernel.org
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250416160125.2914724-1-o.rempel@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cc3628dcd8 upstream.
The function xdp_convert_buff_to_frame() may return NULL if it fails
to correctly convert the XDP buffer into an XDP frame due to memory
constraints, internal errors, or invalid data. Failing to check for NULL
may lead to a NULL pointer dereference if the result is used later in
processing, potentially causing crashes, data corruption, or undefined
behavior.
On XDP redirect failure, the associated page must be released explicitly
if it was previously retained via get_page(). Failing to do so may result
in a memory leak, as the pages reference count is not decremented.
Cc: stable@vger.kernel.org # v5.9+
Fixes: 6c5aa6fc4d ("xen networking: add basic XDP support for xen-netfront")
Signed-off-by: Alexey Nepomnyashih <sdl@nppct.ru>
Link: https://patch.msgid.link/20250417122118.1009824-1-sdl@nppct.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8006aff155 upstream.
According to the review by Bill Cox [1], the Atmel SHA204A random number
generator produces random numbers with very low entropy.
Set the lowest possible entropy for this chip just to be safe.
[1] https://www.metzdowd.com/pipermail/cryptography/2014-December/023858.html
Fixes: da001fb651 ("crypto: atmel-i2c - add support for SHA204A random number generator")
Cc: <stable@vger.kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 47068309b5 upstream.
Replace kzalloc with kvzalloc for the exit_dump buffer allocation, which
can require large contiguous memory depending on the implementation.
This change prevents allocation failures by allowing the system to fall
back to vmalloc when contiguous memory allocation fails.
Since this buffer is only used for debugging purposes, physical memory
contiguity is not required, making vmalloc a suitable alternative.
Cc: stable@vger.kernel.org
Fixes: 07814a9439 ("sched_ext: Print debug dump after an error exit")
Suggested-by: Rik van Riel <riel@surriel.com>
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fbd3039a64 upstream.
As per virtio spec the fields cols and rows are specified as little
endian. Although there is no legacy interface requirement that would
state that cols and rows need to be handled as native endian when legacy
interface is used, unlike for the fields of the adjacent struct
virtio_console_control, I decided to err on the side of caution based
on some non-conclusive virtio spec repo archaeology and opt for using
virtio16_to_cpu() much like for virtio_console_control.event. Strictly
by the letter of the spec virtio_le_to_cpu() would have been sufficient.
But when the legacy interface is not used, it boils down to the same.
And when using the legacy interface, the device formatting these as
little endian when the guest is big endian would surprise me more than
it using guest native byte order (which would make it compatible with
the current implementation). Nevertheless somebody trying to implement
the spec following it to the letter could end up forcing little endian
byte order when the legacy interface is in use. So IMHO this ultimately
needs a judgement call by the maintainers.
Fixes: 8345adbf96 ("virtio: console: Accept console size along with resize control message")
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Cc: stable@vger.kernel.org # v2.6.35+
Message-Id: <20250322002954.3129282-1-pasic@linux.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit eaaff9b670 upstream.
In case the fib match is used from the input hook we can avoid the fib
lookup if early demux assigned a socket for us: check that the input
interface matches sk-cached one.
Rework the existing 'lo bypass' logic to first check sk, then
for loopback interface type to elide the fib lookup.
This speeds up fib matching a little, before:
93.08 GBit/s (no rules at all)
75.1 GBit/s ("fib saddr . iif oif missing drop" in prerouting)
75.62 GBit/s ("fib saddr . iif oif missing drop" in input)
After:
92.48 GBit/s (no rules at all)
75.62 GBit/s (fib rule in prerouting)
90.37 GBit/s (fib rule in input).
Numbers for the 'no rules' and 'prerouting' are expected to
closely match in-between runs, the 3rd/input test case exercises the
the 'avoid lookup if cached ifindex in sk matches' case.
Test used iperf3 via veth interface, lo can't be used due to existing
loopback test.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d81cadbe16 upstream.
On SNP-enabled system, VMRUN marks AVIC Backing Page as in-use while
the guest is running for both secure and non-secure guest. Any hypervisor
write to the in-use vCPU's AVIC backing page (e.g. to inject an interrupt)
will generate unexpected #PF in the host.
Currently, attempt to run AVIC guest would result in the following error:
BUG: unable to handle page fault for address: ff3a442e549cc270
#PF: supervisor write access in kernel mode
#PF: error_code(0x80000003) - RMP violation
PGD b6ee01067 P4D b6ee02067 PUD 10096d063 PMD 11c540063 PTE 80000001149cc163
SEV-SNP: PFN 0x1149cc unassigned, dumping non-zero entries in 2M PFN region: [0x114800 - 0x114a00]
...
Newer AMD system is enhanced to allow hypervisor to modify the backing page
for non-secure guest on SNP-enabled system. This enhancement is available
when the CPUID Fn8000_001F_EAX bit 30 is set (HvInUseWrAllowed).
This table describes AVIC support matrix w.r.t. SNP enablement:
| Non-SNP system | SNP system
-----------------------------------------------------
Non-SNP guest | AVIC Activate | AVIC Activate iff
| | HvInuseWrAllowed=1
-----------------------------------------------------
SNP guest | N/A | Secure AVIC
Therefore, check and disable AVIC in kvm_amd driver when the feature is not
available on SNP-enabled system.
See the AMD64 Architecture Programmer’s Manual (APM) Volume 2 for detail.
(https://www.amd.com/content/dam/amd/en/documents/processor-tech-docs/
programmer-references/40332.pdf)
Fixes: 216d106c7f ("x86/sev: Add SEV-SNP host initialization support")
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20241104075845.7583-1-suravee.suthikulpanit@amd.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Cc: Naveen N Rao <naveen@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit cc73cc6bcd ]
Currently, interrupts need to be disabled before single-step mode is
set, it requires that CSR_PRMD_PIE be cleared in save_local_irqflag()
which is called by setup_singlestep(), this is reasonable.
But in the first kprobe breakpoint exception, if the irq is enabled at
the beginning of do_bp(), it will not be disabled at the end of do_bp()
due to the CSR_PRMD_PIE has been cleared in save_local_irqflag(). So for
this case, it may corrupt exception context when restoring the exception
after do_bp() in handle_bp(), this is not reasonable.
In order to restore exception safely in handle_bp(), it needs to ensure
the irq is disabled at the end of do_bp(), so just add a local variable
to record the original interrupt status in the parent context, then use
it as the check condition to enable and disable irq in do_bp().
While at it, do the similar thing for other do_xyz() exception handlers
to make them more robust.
Fixes: 6d4cc40fb5 ("LoongArch: Add kprobes support")
Suggested-by: Jinyang He <hejinyang@loongson.cn>
Suggested-by: Huacai Chen <chenhuacai@loongson.cn>
Co-developed-by: Tianyang Zhang <zhangtianyang@loongson.cn>
Signed-off-by: Tianyang Zhang <zhangtianyang@loongson.cn>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bb0511d59d ]
In the current code, the definition of regs_irqs_disabled() is actually
"!(regs->csr_prmd & CSR_CRMD_IE)" because arch_irqs_disabled_flags() is
defined as "!(flags & CSR_CRMD_IE)", it looks a little strange.
Define regs_irqs_disabled() as !(regs->csr_prmd & CSR_PRMD_PIE) directly
to make it more clear, no functional change.
While at it, the return value of regs_irqs_disabled() is true or false,
so change its type to reflect that and also make it always inline.
Fixes: 803b0fc5c3 ("LoongArch: Add process management")
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fb8e9f59d6 ]
As of commit dce4456619 ("mm/memtest: add ARCH_USE_MEMTEST"),
architectures must select ARCH_USE_MEMTESET to enable CONFIG_MEMTEST.
Commit 628c3bb40e ("LoongArch: Add boot and setup routines") added
support for early_memtest but did not select ARCH_USE_MEMTESET.
Fixes: 628c3bb40e ("LoongArch: Add boot and setup routines")
Tested-by: Erpeng Xu <xuerpeng@uniontech.com>
Tested-by: Yuli Wang <wangyuli@uniontech.com>
Signed-off-by: Yuli Wang <wangyuli@uniontech.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1a97fea9db ]
Perf doesn't work at perf stat for hardware events on certain x86 platforms:
$perf stat -- sleep 1
Performance counter stats for 'sleep 1':
16.44 msec task-clock # 0.016 CPUs utilized
2 context-switches # 121.691 /sec
0 cpu-migrations # 0.000 /sec
54 page-faults # 3.286 K/sec
<not supported> cycles
<not supported> instructions
<not supported> branches
<not supported> branch-misses
The reason is that the check in x86_pmu_hw_config() for sampling events is
unexpectedly applied to counting events as well.
It should only impact x86 platforms with limit_period used for non-PEBS
events. For Intel platforms, it should only impact some older platforms,
e.g., HSW, BDW and NHM.
Fixes: 88ec7eedbb ("perf/x86: Fix low freqency setting issue")
Signed-off-by: Luo Gengkun <luogengkun@huaweicloud.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lore.kernel.org/r/20250423064724.3716211-1-luogengkun@huaweicloud.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e6f141b332 ]
pipe_clear_nowait has two noinline macros, but we only need one.
I checked the whole tree, and this is the only occurrence:
$ grep -r "noinline .* noinline"
fs/splice.c:static noinline void noinline pipe_clear_nowait(struct file *file)
$
Fixes: 0f99fc513d ("splice: clear FMODE_NOWAIT on file if splice/vmsplice is used")
Signed-off-by: "T.J. Mercier" <tjmercier@google.com>
Link: https://lore.kernel.org/20250423180025.2627670-1-tjmercier@google.com
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7d1d19a11c ]
The XOL (execute out-of-line) buffer is used to single-step the
replaced instruction(s) for uprobes. The RISC-V port was missing a
proper fence.i (i$ flushing) after constructing the XOL buffer, which
can result in incorrect execution of stale/broken instructions.
This was found running the BPF selftests "test_progs:
uprobe_autoattach, attach_probe" on the Spacemit K1/X60, where the
uprobes tests randomly blew up.
Reviewed-by: Guo Ren <guoren@kernel.org>
Fixes: 74784081aa ("riscv: Add uprobes supported")
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://lore.kernel.org/r/20250419111402.1660267-2-bjorn@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 121f34341d ]
The flush_icache_range() function is implemented as a "function-like
macro with unused parameters", which can result in "unused variables"
warnings.
Replace the macro with a static inline function, as advised by
Documentation/process/coding-style.rst.
Fixes: 08f051eda3 ("RISC-V: Flush I$ when making a dirty page executable")
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://lore.kernel.org/r/20250419111402.1660267-1-bjorn@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 07172206a2 ]
Return -EINVAL instead of success if amd_ir_set_vcpu_affinity() is
invoked without use_vapic; lying to KVM about whether or not the IRTE was
configured to post IRQs is all kinds of bad.
Fixes: d98de49a53 ("iommu/amd: Enable vAPIC interrupt remapping mode by default")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20250404193923.1413163-6-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7b720c7202 ]
When the user increased the read-ahead size through sysfs this value
currently get lost if the device is reprobe, including on a resume
from suspend.
As there is no hardware limitation for the read-ahead size there is
no real need to reset it or track a separate hardware limitation
like for max_sectors.
This restores the pre-atomic queue limit behavior in the sd driver as
sd did not use blk_queue_io_opt and thus never updated the read ahead
size to the value based of the optimal I/O, but changes behavior for
all other drivers. As the new behavior seems useful and sd is the
driver for which the readahead size tweaks are most useful that seems
like a worthwhile trade off.
Fixes: 804e498e04 ("sd: convert to the atomic queue limits API")
Reported-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20250424082521.1967286-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3f77c3dfff ]
Make the wait_context a full part of the q_info struct rather
than a stack variable that goes away after pdsc_adminq_post()
is done so that the context is still available after the wait
loop has given up.
There was a case where a slow development firmware caused
the adminq request to time out, but then later the FW finally
finished the request and sent the interrupt. The handler tried
to complete_all() the completion context that had been created
on the stack in pdsc_adminq_post() but no longer existed.
This caused bad pointer usage, kernel crashes, and much wailing
and gnashing of teeth.
Fixes: 01ba61b55b ("pds_core: Add adminq processing and commands")
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250421174606.3892-5-shannon.nelson@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f9559d8182 ]
When the pds_core driver was first created there were some race
conditions around using the adminq, especially for client drivers.
To reduce the possibility of a race condition there's a check
against pf->state in pds_client_adminq_cmd(). This is problematic
for a couple of reasons:
1. The PDSC_S_INITING_DRIVER bit is set during probe, but not
cleared until after everything in probe is complete, which
includes creating the auxiliary devices. For pds_fwctl this
means it can't make any adminq commands until after pds_core's
probe is complete even though the adminq is fully up by the
time pds_fwctl's auxiliary device is created.
2. The race conditions around using the adminq have been fixed
and this path is already protected against client drivers
calling pds_client_adminq_cmd() if the adminq isn't ready,
i.e. see pdsc_adminq_post() -> pdsc_adminq_inc_if_up().
Fix this by removing the pf->state check in pds_client_adminq_cmd()
because invalid accesses to pds_core's adminq is already handled by
pdsc_adminq_post()->pdsc_adminq_inc_if_up().
Fixes: 10659034c6 ("pds_core: add the aux client API")
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250421174606.3892-4-shannon.nelson@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2567daad69 ]
If the FW doesn't support the PDS_CORE_CMD_FW_CONTROL command
the driver might at the least print garbage and at the worst
crash when the user runs the "devlink dev info" devlink command.
This happens because the stack variable fw_list is not 0
initialized which results in fw_list.num_fw_slots being a
garbage value from the stack. Then the driver tries to access
fw_list.fw_names[i] with i >= ARRAY_SIZE and runs off the end
of the array.
Fix this by initializing the fw_list and by not failing
completely if the devcmd fails because other useful information
is printed via devlink dev info even if the devcmd fails.
Fixes: 45d76f4929 ("pds_core: set up device and adminq")
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250421174606.3892-3-shannon.nelson@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d9e2f070d8 ]
The pds_core's adminq is protected by the adminq_lock, which prevents
more than 1 command to be posted onto it at any one time. This makes it
so the client drivers cannot simultaneously post adminq commands.
However, the completions happen in a different context, which means
multiple adminq commands can be posted sequentially and all waiting
on completion.
On the FW side, the backing adminq request queue is only 16 entries
long and the retry mechanism and/or overflow/stuck prevention is
lacking. This can cause the adminq to get stuck, so commands are no
longer processed and completions are no longer sent by the FW.
As an initial fix, prevent more than 16 outstanding adminq commands so
there's no way to cause the adminq from getting stuck. This works
because the backing adminq request queue will never have more than 16
pending adminq commands, so it will never overflow. This is done by
reducing the adminq depth to 16.
Fixes: 45d76f4929 ("pds_core: set up device and adminq")
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250421174606.3892-2-shannon.nelson@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
