driver (Frank Li)
- Powered down the Qoriq's TMU at suspend time (Alice Guo)
- Added ipq5332, ipq5424 compatible for the QCom's tsens driver and
TSENS enable / calibration support for V2 (Praveenkumar I)
- Added missing rk3328 mapping entry (Trevor Woerner)
- Removed duplicate struct declaration in the thermal core header
(Xueqin Luo)
- Disabled the monitoring mode during suspend for the LVTS Mediatek
driver to prevent temperature acquisition glitches (Nícolas
F. R. A. Prado)
- Disabled Stage 3 thermal threshold on the LVTS Mediatek driver
because it disables the suspend ability and does have an not
interrupt handler (Nícolas F. R. A. Prado)
- Fixed low temperature offset interrupt on the LVTS Mediatek driver
to prevent multiple interrupts when the system is at its normal
functionning temperature (Nícolas F. R. A. Prado)
- Enable the interrupts on the LVTS Mediatek driver only on used
sensors (Nícolas F. R. A. Prado)
- Added the BCM74110 compatible DT binding and the corresponding code
to support the chip with a different process (Florian Fainelli)
- Corrected indentation and style in DTS example (Krzysztof Kozlowski)
- Unified hexadecimal annotatation in the rcar_gen3 driver (Niklas
Söderlund)
- Factored out the code logic to read the fuse on the on Gen3 and Gen4
drivers (Niklas Söderlund)
- Dropped unused driver data on the QCom's spmi temperature alarm
driver (Johan Hovold)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGn3N4YVz0WNVyHskqDIjiipP6E8FAmfjvQ0ACgkQqDIjiipP
6E/71wgAqc9VciB7xk47/5AEIVX4UOYIIVC70tsX6gymnxRHthIv5g3HwRlFhj8z
9inkZExqJgSyIn5QX08djeRvDpc8aUbBDhnNb2tV2ZCt4U9W33AH95hanBfZBJzK
D2i4iP/TGsCjZEBPokPwk/IdCLtwDjgZ8ZKSQ6hLN9UFIvSHTPNtD0enrvp+axrN
toM/C+S4CmDZ4qLE7k8/KOiTCe+FP893uIyvuSbAqH7kvwDKshOElKWE2au4Y/42
r7l1fWDnw8gtTsWfZ4QLOVsEjQk4MqEJ0Hw4JdHAUOQ5xkxUMrED8purm7xDj3wP
aG7K21UvDZ3FohDbuXi0DW0zQNDaww==
=Qtg7
-----END PGP SIGNATURE-----
Merge tag 'thermal-v6.15-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux
Merge thermal driver updates for 6.15-rc1 from Daniel Lezcano:
"- Used dev_err_probe() helpers to simplify the init code in the Qoriq
driver (Frank Li)
- Powered down the Qoriq's TMU at suspend time (Alice Guo)
- Added ipq5332, ipq5424 compatible for the QCom's tsens driver and
TSENS enable / calibration support for V2 (Praveenkumar I)
- Added missing rk3328 mapping entry (Trevor Woerner)
- Removed duplicate struct declaration in the thermal core header
(Xueqin Luo)
- Disabled the monitoring mode during suspend for the LVTS Mediatek
driver to prevent temperature acquisition glitches (Nícolas
F. R. A. Prado)
- Disabled Stage 3 thermal threshold on the LVTS Mediatek driver
because it disables the suspend ability and does have an not
interrupt handler (Nícolas F. R. A. Prado)
- Fixed low temperature offset interrupt on the LVTS Mediatek driver
to prevent multiple interrupts when the system is at its normal
functionning temperature (Nícolas F. R. A. Prado)
- Enable the interrupts on the LVTS Mediatek driver only on used
sensors (Nícolas F. R. A. Prado)
- Added the BCM74110 compatible DT binding and the corresponding code
to support the chip with a different process (Florian Fainelli)
- Corrected indentation and style in DTS example (Krzysztof Kozlowski)
- Unified hexadecimal annotatation in the rcar_gen3 driver (Niklas
Söderlund)
- Factored out the code logic to read the fuse on the on Gen3 and Gen4
drivers (Niklas Söderlund)
- Dropped unused driver data on the QCom's spmi temperature alarm
driver (Johan Hovold)"
* tag 'thermal-v6.15-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux:
thermal/drivers/qcom-spmi-temp-alarm: Drop unused driver data
thermal: rcar_gen3: Reuse logic to read fuses on Gen3 and Gen4
thermal: rcar_gen3: Use lowercase hex constants
dt-bindings: thermal: Correct indentation and style in DTS example
thermal/drivers/brcmstb_thermal: Add support for BCM74110
dt-bindings: thermal: Update for BCM74110
thermal/drivers/mediatek/lvts: Only update IRQ enable for valid sensors
thermal/drivers/mediatek/lvts: Start sensor interrupts disabled
thermal/drivers/mediatek/lvts: Disable low offset IRQ for minimum threshold
thermal/drivers/mediatek/lvts: Disable Stage 3 thermal threshold
thermal/drivers/mediatek/lvts: Disable monitor mode during suspend
thermal: core: Remove duplicate struct declaration
thermal/drivers/rockchip: Add missing rk3328 mapping entry
thermal/drivers/tsens: Add TSENS enable and calibration support for V2
dt-bindings: thermal: tsens: Add ipq5332, ipq5424 compatible
thermal/drivers/qoriq: Power down TMU on system suspend
thermal/drivers/qoriq: Use dev_err_probe() simplify the code
The platform device driver data has not been used since commit
7a4ca51b70 ("thermal/drivers/qcom-spmi: Use devm_iio_channel_get") so
drop the unnecessary assignment.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250228082936.5694-1-johan+linaro@kernel.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
The hardware calibration is fused on some, but not all, Gen3 and Gen4
boards. The calibrations values are the same on both generations but
located at different register offsets.
Instead of having duplicated logic to read the and store the values
create structure to hold the register parameters and have a common
function do the reading.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20250305174631.4119374-3-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
The style of the driver is to use lowercase hex constants, correct the
few outlines.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20250305174631.4119374-2-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
DTS example in the bindings should be indented with 2- or 4-spaces and
aligned with opening '- |', so correct any differences like 3-spaces or
mixtures 2- and 4-spaces in one binding.
No functional changes here, but saves some comments during reviews of
new patches built on existing code.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250107131027.246608-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
BCM74110 uses a different process node compared to previous chips that
requires a different equation, account for that.
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20250116193842.758788-3-florian.fainelli@broadcom.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Update the binding with the BCM74110 compatible string which denotes the
first device we need to support in a different process node requiring an
updated thermal equation.
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250116193842.758788-2-florian.fainelli@broadcom.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Only sensors that are valid need to have their interrupts enable status
updated based on their thresholds. Use the lvts_for_each_valid_sensor()
helper in lvts_update_irq_mask() to ignore invalid sensors.
Currently, since the invalid sensors will always contain zeroed out
thresholds (from kzalloc), they will always get their interrupts
disabled on this loop. So this commit doesn't change the resulting
interrupts configuration, but it slightly optimizes the loop by skipping
the invalid sensors, avoids potential future surprises if at some point
memory is no longer allocated for invalid sensors, as well as makes the
code more obvious.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20250113-mt8192-lvts-filtered-suspend-fix-v2-5-07a25200c7c6@collabora.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Interrupts are enabled per sensor in lvts_update_irq_mask() as needed,
there's no point in enabling all of them during initialization. Change
the MONINT register initial value so all sensor interrupts start
disabled.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20250113-mt8192-lvts-filtered-suspend-fix-v2-4-07a25200c7c6@collabora.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
In order to get working interrupts, a low offset value needs to be
configured. The minimum value for it is 20 Celsius, which is what is
configured when there's no lower thermal trip (ie the thermal core
passes -INT_MAX as low trip temperature). However, when the temperature
gets that low and fluctuates around that value it causes an interrupt
storm.
Prevent that interrupt storm by not enabling the low offset interrupt if
the low threshold is the minimum one.
Cc: stable@vger.kernel.org
Fixes: 77354eaef8 ("thermal/drivers/mediatek/lvts_thermal: Don't leave threshold zeroed")
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20250113-mt8192-lvts-filtered-suspend-fix-v2-3-07a25200c7c6@collabora.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
The Stage 3 thermal threshold is currently configured during
the controller initialization to 105 Celsius. From the kernel
perspective, this configuration is harmful because:
* The stage 3 interrupt that gets triggered when the threshold is
crossed is not handled in any way by the IRQ handler, it just gets
cleared. Besides, the temperature used for stage 3 comes from the
sensors, and the critical thermal trip points described in the
Devicetree will already cause a shutdown when crossed (at a lower
temperature, of 100 Celsius, for all SoCs currently using this
driver).
* The only effect of crossing the stage 3 threshold that has been
observed is that it causes the machine to no longer be able to enter
suspend. Even if that was a result of a momentary glitch in the
temperature reading of a sensor (as has been observed on the
MT8192-based Chromebooks).
For those reasons, disable the Stage 3 thermal threshold configuration.
Cc: stable@vger.kernel.org
Reported-by: Hsin-Te Yuan <yuanhsinte@chromium.org>
Closes: https://lore.kernel.org/all/20241108-lvts-v1-1-eee339c6ca20@chromium.org/
Fixes: f5f633b182 ("thermal/drivers/mediatek: Add the Low Voltage Thermal Sensor driver")
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20250113-mt8192-lvts-filtered-suspend-fix-v2-2-07a25200c7c6@collabora.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
When configured in filtered mode, the LVTS thermal controller will
monitor the temperature from the sensors and trigger an interrupt once a
thermal threshold is crossed.
Currently this is true even during suspend and resume. The problem with
that is that when enabling the internal clock of the LVTS controller in
lvts_ctrl_set_enable() during resume, the temperature reading can glitch
and appear much higher than the real one, resulting in a spurious
interrupt getting generated.
Disable the temperature monitoring and give some time for the signals to
stabilize during suspend in order to prevent such spurious interrupts.
Cc: stable@vger.kernel.org
Reported-by: Hsin-Te Yuan <yuanhsinte@chromium.org>
Closes: https://lore.kernel.org/all/20241108-lvts-v1-1-eee339c6ca20@chromium.org/
Fixes: 8137bb9060 ("thermal/drivers/mediatek/lvts_thermal: Add suspend and resume")
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20250113-mt8192-lvts-filtered-suspend-fix-v2-1-07a25200c7c6@collabora.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
The struct thermal_zone_device is already declared on line 32, so the
duplicate declaration has been removed.
Fixes: b1ae92dcfa ("thermal: core: Make struct thermal_zone_device definition internal")
Signed-off-by: xueqin Luo <luoxueqin@kylinos.cn>
Link: https://lore.kernel.org/r/20250206081436.51785-1-luoxueqin@kylinos.cn
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
The mapping table for the rk3328 is missing the entry for -25C which is
found in the TRM section 9.5.2 "Temperature-to-code mapping".
NOTE: the kernel uses the tsadc_q_sel=1'b1 mode which is defined as:
4096-<code in table>. Whereas the table in the TRM gives the code
"3774" for -25C, the kernel uses 4096-3774=322.
[Dragan Simic] : "After going through the RK3308 and RK3328 TRMs, as
well as through the downstream kernel code, it seems we may have
some troubles at our hands. Let me explain, please.
To sum it up, part 1 of the RK3308 TRM v1.1 says on page 538 that
the equation for the output when tsadc_q_sel equals 1 is (4096 -
tsadc_q), while part 1 of the RK3328 TRM v1.2 says that the output
equation is (1024 - tsadc_q) in that case.
The downstream kernel code, however, treats the RK3308 and RK3328
tables and their values as being the same. It even mentions 1024 as
the "offset" value in a comment block for the rk_tsadcv3_control()
function, just like the upstream code does, which is obviously wrong
"offset" value when correlated with the table on page 544 of part 1
of the RK3308 TRM v1.1.
With all this in mind, it's obvious that more work is needed to make
it clear where's the actual mistake (it could be that the TRM is
wrong), which I'll volunteer for as part of the SoC binning project.
In the meantime, this patch looks fine as-is to me, by offering
what's a clear improvement to the current state of the upstream
code"
Link: https://opensource.rock-chips.com/images/9/97/Rockchip_RK3328TRM_V1.1-Part1-20170321.pdf
Cc: stable@vger.kernel.org
Fixes: eda519d5f7 ("thermal: rockchip: Support the RK3328 SOC in thermal driver")
Signed-off-by: Trevor Woerner <twoerner@gmail.com>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Link: https://lore.kernel.org/r/20250207175048.35959-1-twoerner@gmail.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
SoCs without RPM need to enable sensors and calibrate them from the kernel.
The IPQ5332 and IPQ5424 use the tsens v2.3.3 IP and do not have RPM.
Therefore, add a new calibration function for V2, as the tsens.c calib
function only supports V1. Also add new feature_config, ops and data for
IPQ5332, IPQ5424.
Although the TSENS IP supports 16 sensors, not all are used. The hw_id
is used to enable the relevant sensors.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com>
Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@quicinc.com>
Link: https://lore.kernel.org/r/20250210120436.821684-3-quic_mmanikan@quicinc.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
The IPQ5332 and IPQ5424 use TSENS v2.3.3 IP with combined interrupt.
RPM is not available in these SoCs, hence adding new compatible
to have the sensor enablement and calibration function. Also add
nvmem-cell-names.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com>
Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@quicinc.com>
Link: https://lore.kernel.org/r/20250210120436.821684-2-quic_mmanikan@quicinc.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Enable power-down of TMU (Thermal Management Unit) for TMU version 2 during
system suspend to save power. Save approximately 4.3mW on VDD_ANA_1P8 on
i.MX93 platforms.
Signed-off-by: Alice Guo <alice.guo@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20241209164859.3758906-2-Frank.Li@nxp.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Merge thermal core updates and miscellaneous updates of the thermal
control subsystem for 6.15-rc1:
- Delay exposing thermal zone sysfs interface to prevent user space
from accessing thermal zones that have not been completely
initialized yet (Lucas De Marchi).
- Fix a spelling mistake in a comment in the thermal core (Colin Ian
King).
- Use kcalloc() instead of kzalloc() in some places in the thermal
control subsystem (Lukasz Luba, Ethan Carter Edwards).
- Clean up variable initialization in int340x_thermal_zone_add()
(Christophe JAILLET).
* thermal-core:
thermal: core: Delay exposing sysfs interface
thermal: core: Fix spelling mistake "Occurences" -> "Occurrences"
* thermal-misc:
thermal: intel: Clean up zone_trips[] initialization in int340x_thermal_zone_add()
thermal: hisi: Use kcalloc() instead of kzalloc() with multiplication
thermal: int340x: Use kcalloc() instead of kzalloc() with multiplication
thermal: k3_j72xx_bandgap: Use kcalloc() instead of kzalloc()
thermal/of: Use kcalloc() instead of kzalloc() with multiplication
thermal/debugfs: replace kzalloc() with kcalloc() in thermal_debug_tz_add()
Not all devices have an ACPI companion fwnode, so adev might be NULL.
This is similar to the commit cd2fd6eab4
("platform/x86: int3472: Check for adev == NULL").
Add a check for adev not being set and return -ENODEV in that case to
avoid a possible NULL pointer deref in int3402_thermal_probe().
Note, under the same directory, int3400_thermal_probe() has such a
check.
Fixes: 77e337c6e2 ("Thermal: introduce INT3402 thermal driver")
Signed-off-by: Chenyuan Yang <chenyuan0y@gmail.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20250313043611.1212116-1-chenyuan0y@gmail.com
[ rjw: Subject edit, added Fixes: ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
There's a race between initializing the governor and userspace accessing
the sysfs interface. From time to time the Intel graphics CI shows this
signature:
<1>[] #PF: error_code(0x0000) - not-present page
<6>[] PGD 0 P4D 0
<4>[] Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI
<4>[] CPU: 3 UID: 0 PID: 562 Comm: thermald Not tainted 6.14.0-rc4-CI_DRM_16208-g7e37396f86d8+ #1
<4>[] Hardware name: Intel Corporation Twin Lake Client Platform/AlderLake-N LP5 RVP, BIOS TWLNFWI1.R00.5222.A01.2405290634 05/29/2024
<4>[] RIP: 0010:policy_show+0x1a/0x40
thermald tries to read the policy file between the sysfs files being
created and the governor set by thermal_set_governor(), which causes the
NULL pointer dereference.
Similarly to the hwmon interface, delay exposing the sysfs files to when
the governor is already set.
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/13655
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patch.msgid.link/20250307-thermal-sysfs-race-v1-1-8a3d4d4ac9c4@intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- Use the specified $(LD) when building userprogs with Clang
- Pass the correct target triple when compile-testing UAPI headers
with Clang
- Fix pacman-pkg build error with KBUILD_OUTPUT
-----BEGIN PGP SIGNATURE-----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=V4ee
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v6.14-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Use the specified $(LD) when building userprogs with Clang
- Pass the correct target triple when compile-testing UAPI headers
with Clang
- Fix pacman-pkg build error with KBUILD_OUTPUT
* tag 'kbuild-fixes-v6.14-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: install-extmod-build: Fix build when specifying KBUILD_OUTPUT
docs: Kconfig: fix defconfig description
kbuild: hdrcheck: fix cross build with clang
kbuild: userprogs: use correct lld when linking through clang
Here are some small USB driver fixes for some reported issues for
6.14-rc6. These contain:
- typec driver fixes
- dwc3 driver fixes
- xhci driver fixes
- renesas controller fixes
- gadget driver fixes
- a new USB quirk added
All of these have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZ83RpQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykjuwCgtiIGxLWcgV/ZjynWswrovKFX3akAnAh6kW1G
+E7ta+MbasbGhI/Kp5pD
=iCYy
-----END PGP SIGNATURE-----
Merge tag 'usb-6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB driver fixes for some reported issues. These
contain:
- typec driver fixes
- dwc3 driver fixes
- xhci driver fixes
- renesas controller fixes
- gadget driver fixes
- a new USB quirk added
All of these have been in linux-next with no reported issues"
* tag 'usb-6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: typec: ucsi: Fix NULL pointer access
usb: quirks: Add DELAY_INIT and NO_LPM for Prolific Mass Storage Card Reader
usb: xhci: Fix host controllers "dying" after suspend and resume
usb: dwc3: Set SUSPENDENABLE soon after phy init
usb: hub: lack of clearing xHC resources
usb: renesas_usbhs: Flush the notify_hotplug_work
usb: renesas_usbhs: Use devm_usb_get_phy()
usb: renesas_usbhs: Call clk_put()
usb: dwc3: gadget: Prevent irq storm when TH re-executes
usb: gadget: Check bmAttributes only if configuration is valid
xhci: Restrict USB4 tunnel detection for USB3 devices to Intel hosts
usb: xhci: Enable the TRB overfetch quirk on VIA VL805
usb: gadget: Fix setting self-powered state on suspend
usb: typec: ucsi: increase timeout for PPM reset operations
acpi: typec: ucsi: Introduce a ->poll_cci method
usb: typec: tcpci_rt1711h: Unmask alert interrupts to fix functionality
usb: gadget: Set self-powered based on MaxPower and bmAttributes
usb: gadget: u_ether: Set is_suspend flag if remote wakeup fails
usb: atm: cxacru: fix a flaw in existing endpoint checks
Here is a single driver core fix that resolves a reported memory leak.
It's been in linux-next for 2 weeks now with no reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZ83SEA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ym7mQCdHxQgl9imsXkR5hT/QwqAadAnOYAAoNW2ftG5
va3lcukik6Br13qKJchV
=86UC
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fix from Greg KH:
"Here is a single driver core fix that resolves a reported memory leak.
It's been in linux-next for 2 weeks now with no reported problems"
* tag 'driver-core-6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
drivers: core: fix device leak in __fw_devlink_relax_cycles()
Here are a number of misc and char and iio driver fixes that have been
sitting in my tree for way too long, and should be merged for 6.14-rc6.
They contain:
- iio driver fixes for reported issues
- regression fix for rtsx_usb card reader
- mei and mhi driver fixes
- small virt driver fixes
- ntsync permissions fix
- other tiny driver fixes for reported problems.
All of these have been in linux-next for quite a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZ83Szw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykt1wCeMzZF9wk1OSGvUA1rZk86FFPHQd4AniYEv4Ze
/FY8PmjKxqkQhJIKCKS4
=7Jpe
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc/IIO driver fixes from Greg KH:
"Here are a number of misc and char and iio driver fixes that have been
sitting in my tree for way too long. They contain:
- iio driver fixes for reported issues
- regression fix for rtsx_usb card reader
- mei and mhi driver fixes
- small virt driver fixes
- ntsync permissions fix
- other tiny driver fixes for reported problems.
All of these have been in linux-next for quite a while with no
reported issues"
* tag 'char-misc-6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (30 commits)
Revert "drivers/card_reader/rtsx_usb: Restore interrupt based detection"
ntsync: Check wait count based on byte size.
bus: simple-pm-bus: fix forced runtime PM use
char: misc: deallocate static minor in error path
eeprom: digsy_mtc: Make GPIO lookup table match the device
drivers: virt: acrn: hsm: Use kzalloc to avoid info leak in pmcmd_ioctl
binderfs: fix use-after-free in binder_devices
slimbus: messaging: Free transaction ID in delayed interrupt scenario
vbox: add HAS_IOPORT dependency
cdx: Fix possible UAF error in driver_override_show()
intel_th: pci: Add Panther Lake-P/U support
intel_th: pci: Add Panther Lake-H support
intel_th: pci: Add Arrow Lake support
intel_th: msu: Fix less trivial kernel-doc warnings
intel_th: msu: Fix kernel-doc warnings
MAINTAINERS: change maintainer for FSI
ntsync: Set the permissions to be 0666
bus: mhi: host: pci_generic: Use pci_try_reset_function() to avoid deadlock
mei: vsc: Use "wakeuphostint" when getting the host wakeup GPIO
mei: me: add panther lake P DID
...
* Fix a couple of bugs affecting pKVM's PSCI relay implementation
when running in the hVHE mode, resulting in the host being entered
with the MMU in an unknown state, and EL2 being in the wrong mode.
x86:
* Set RFLAGS.IF in C code on SVM to get VMRUN out of the STI shadow.
* Ensure DEBUGCTL is context switched on AMD to avoid running the guest with
the host's value, which can lead to unexpected bus lock #DBs.
* Suppress DEBUGCTL.BTF on AMD (to match Intel), as KVM doesn't properly
emulate BTF. KVM's lack of context switching has meant BTF has always been
broken to some extent.
* Always save DR masks for SNP vCPUs if DebugSwap is *supported*, as the guest
can enable DebugSwap without KVM's knowledge.
* Fix a bug in mmu_stress_tests where a vCPU could finish the "writes to RO
memory" phase without actually generating a write-protection fault.
* Fix a printf() goof in the SEV smoke test that causes build failures with
-Werror.
* Explicitly zero EAX and EBX in CPUID.0x8000_0022 output when PERFMON_V2
isn't supported by KVM.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmfNSeUUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNKngf/cLgQAT9AF4nFqcwh5b5uucKHVJ8W
uTiGlWqLAf2UN53L63eZ/7vKQWGQYkOTFvormR14Jam6IYtytsZw1xLBH4fGtUyB
qVjk0EPzaKGqn3LrgyneQNCXdyxJv7EBVBgoOKH0pvOksoW2E5ZizhhtRFtL7nCE
Yk8FQKpP0mIBk04RMsvzJVEFKIb4OZgJadWo0gryg1oF2aAv7mxQjyqUWsBDsb3q
99c0ElSBfV39FeT8xeok4k7S5jbBWii2KiaH72ZsNiBu0rYmEuLwIoygCNNWL9Wu
FPdQ+r//YrzfCJSXwGPfdUaRaF4p2642S6oiXQuusNNUmhK6/MRo3mZo8A==
=XQHm
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"arm64:
- Fix a couple of bugs affecting pKVM's PSCI relay implementation
when running in the hVHE mode, resulting in the host being entered
with the MMU in an unknown state, and EL2 being in the wrong mode
x86:
- Set RFLAGS.IF in C code on SVM to get VMRUN out of the STI shadow
- Ensure DEBUGCTL is context switched on AMD to avoid running the
guest with the host's value, which can lead to unexpected bus lock
#DBs
- Suppress DEBUGCTL.BTF on AMD (to match Intel), as KVM doesn't
properly emulate BTF. KVM's lack of context switching has meant BTF
has always been broken to some extent
- Always save DR masks for SNP vCPUs if DebugSwap is *supported*, as
the guest can enable DebugSwap without KVM's knowledge
- Fix a bug in mmu_stress_tests where a vCPU could finish the "writes
to RO memory" phase without actually generating a write-protection
fault
- Fix a printf() goof in the SEV smoke test that causes build
failures with -Werror
- Explicitly zero EAX and EBX in CPUID.0x8000_0022 output when
PERFMON_V2 isn't supported by KVM"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: Explicitly zero EAX and EBX when PERFMON_V2 isn't supported by KVM
KVM: selftests: Fix printf() format goof in SEV smoke test
KVM: selftests: Ensure all vCPUs hit -EFAULT during initial RO stage
KVM: SVM: Don't rely on DebugSwap to restore host DR0..DR3
KVM: SVM: Save host DR masks on CPUs with DebugSwap
KVM: arm64: Initialize SCTLR_EL1 in __kvm_hyp_init_cpu()
KVM: arm64: Initialize HCR_EL2.E2H early
KVM: x86: Snapshot the host's DEBUGCTL after disabling IRQs
KVM: SVM: Manually context switch DEBUGCTL if LBR virtualization is disabled
KVM: x86: Snapshot the host's DEBUGCTL in common x86
KVM: SVM: Suppress DEBUGCTL.BTF on AMD
KVM: SVM: Drop DEBUGCTL[5:2] from guest's effective value
KVM: selftests: Assert that STI blocking isn't set after event injection
KVM: SVM: Set RFLAGS.IF=1 in C code, to get VMRUN out of the STI shadow
- Set RFLAGS.IF in C code on SVM to get VMRUN out of the STI shadow.
- Ensure DEBUGCTL is context switched on AMD to avoid running the guest with
the host's value, which can lead to unexpected bus lock #DBs.
- Suppress DEBUGCTL.BTF on AMD (to match Intel), as KVM doesn't properly
emulate BTF. KVM's lack of context switching has meant BTF has always been
broken to some extent.
- Always save DR masks for SNP vCPUs if DebugSwap is *supported*, as the guest
can enable DebugSwap without KVM's knowledge.
- Fix a bug in mmu_stress_tests where a vCPU could finish the "writes to RO
memory" phase without actually generating a write-protection fault.
- Fix a printf() goof in the SEV smoke test that causes build failures with
-Werror.
- Explicitly zero EAX and EBX in CPUID.0x8000_0022 output when PERFMON_V2
isn't supported by KVM.
-----BEGIN PGP SIGNATURE-----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=as6u
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-fixes-6.14-rcN.2' of https://github.com/kvm-x86/linux into HEAD
KVM x86 fixes for 6.14-rcN #2
- Set RFLAGS.IF in C code on SVM to get VMRUN out of the STI shadow.
- Ensure DEBUGCTL is context switched on AMD to avoid running the guest with
the host's value, which can lead to unexpected bus lock #DBs.
- Suppress DEBUGCTL.BTF on AMD (to match Intel), as KVM doesn't properly
emulate BTF. KVM's lack of context switching has meant BTF has always been
broken to some extent.
- Always save DR masks for SNP vCPUs if DebugSwap is *supported*, as the guest
can enable DebugSwap without KVM's knowledge.
- Fix a bug in mmu_stress_tests where a vCPU could finish the "writes to RO
memory" phase without actually generating a write-protection fault.
- Fix a printf() goof in the SEV smoke test that causes build failures with
-Werror.
- Explicitly zero EAX and EBX in CPUID.0x8000_0022 output when PERFMON_V2
isn't supported by KVM.
- Fix a couple of bugs affecting pKVM's PSCI relay implementation
when running in the hVHE mode, resulting in the host being entered
with the MMU in an unknown state, and EL2 being in the wrong mode.
-----BEGIN PGP SIGNATURE-----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=1NeA
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-fixes-6.14-4' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.14, take #4
- Fix a couple of bugs affecting pKVM's PSCI relay implementation
when running in the hVHE mode, resulting in the host being entered
with the MMU in an unknown state, and EL2 being in the wrong mode.
or aren't considered necessary for -stable kernels.
26 are for MM and 7 are for non-MM.
- "mm: memory_failure: unmap poisoned folio during migrate properly"
from Ma Wupeng fixes a couple of two year old bugs involving the
migration of hwpoisoned folios.
- "selftests/damon: three fixes for false results" from SeongJae Park
fixes three one year old bugs in the SAMON selftest code.
The remainder are singletons and doubletons. Please see the individual
changelogs for details.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZ8zgnAAKCRDdBJ7gKXxA
jmTzAP9LsTIpkPkRXDpwxPR/Si5KPwOkE6sGj4ETEqbX3vUvcAEA/Lp7oafc7Vqr
XxlC1VFush1ZK29Tecxzvnapl2/VSAs=
=zBvY
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2025-03-08-16-27' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"33 hotfixes. 24 are cc:stable and the remainder address post-6.13
issues or aren't considered necessary for -stable kernels.
26 are for MM and 7 are for non-MM.
- "mm: memory_failure: unmap poisoned folio during migrate properly"
from Ma Wupeng fixes a couple of two year old bugs involving the
migration of hwpoisoned folios.
- "selftests/damon: three fixes for false results" from SeongJae Park
fixes three one year old bugs in the SAMON selftest code.
The remainder are singletons and doubletons. Please see the individual
changelogs for details"
* tag 'mm-hotfixes-stable-2025-03-08-16-27' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (33 commits)
mm/page_alloc: fix uninitialized variable
rapidio: add check for rio_add_net() in rio_scan_alloc_net()
rapidio: fix an API misues when rio_add_net() fails
MAINTAINERS: .mailmap: update Sumit Garg's email address
Revert "mm/page_alloc.c: don't show protection in zone's ->lowmem_reserve[] for empty zone"
mm: fix finish_fault() handling for large folios
mm: don't skip arch_sync_kernel_mappings() in error paths
mm: shmem: remove unnecessary warning in shmem_writepage()
userfaultfd: fix PTE unmapping stack-allocated PTE copies
userfaultfd: do not block on locking a large folio with raised refcount
mm: zswap: use ATOMIC_LONG_INIT to initialize zswap_stored_pages
mm: shmem: fix potential data corruption during shmem swapin
mm: fix kernel BUG when userfaultfd_move encounters swapcache
selftests/damon/damon_nr_regions: sort collected regiosn before checking with min/max boundaries
selftests/damon/damon_nr_regions: set ops update for merge results check to 100ms
selftests/damon/damos_quota: make real expectation of quota exceeds
include/linux/log2.h: mark is_power_of_2() with __always_inline
NFS: fix nfs_release_folio() to not deadlock via kcompactd writeback
mm, swap: avoid BUG_ON in relocate_cluster()
mm: swap: use correct step in loop to wait all clusters in wait_for_allocation()
...
- Add more model IDs to the AMD microcode version check,
more people are hitting these checks
- Fix a Xen guest boot warning related to AMD northbridge
setup
- Fix SEV guest bugs related to a recent changes in its
locking logic
- Fix a missing definition of PTRS_PER_PMD that assembly
builds can hit
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=kZCC
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2025-03-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull more x86 fixes from Ingo Molnar:
- Add more model IDs to the AMD microcode version check, more people
are hitting these checks
- Fix a Xen guest boot warning related to AMD northbridge setup
- Fix SEV guest bugs related to a recent changes in its locking logic
- Fix a missing definition of PTRS_PER_PMD that assembly builds can hit
* tag 'x86-urgent-2025-03-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/microcode/AMD: Add some forgotten models to the SHA check
x86/mm: Define PTRS_PER_PMD for assembly code too
virt: sev-guest: Move SNP Guest Request data pages handling under snp_cmd_mutex
virt: sev-guest: Allocate request data dynamically
x86/amd_nb: Use rdmsr_safe() in amd_get_mmconfig_range()
-----BEGIN PGP SIGNATURE-----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=QG87
-----END PGP SIGNATURE-----
Merge tag 'loongarch-fixes-6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch fixes from Huacai Chen:
"Fix bugs in kernel build, hibernation, memory management and KVM"
* tag 'loongarch-fixes-6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: KVM: Fix GPA size issue about VM
LoongArch: KVM: Reload guest CSR registers after sleep
LoongArch: KVM: Add interrupt checking for AVEC
LoongArch: Set hugetlb mmap base address aligned with pmd size
LoongArch: Set max_pfn with the PFN of the last page
LoongArch: Use polling play_dead() when resuming from hibernation
LoongArch: Eliminate superfluous get_numa_distances_cnt()
LoongArch: Convert unreachable() to BUG()
Physical address space is 48 bit on Loongson-3A5000 physical machine,
however it is 47 bit for VM on Loongson-3A5000 system. Size of physical
address space of VM is the same with the size of virtual user space (a
half) of physical machine.
Variable cpu_vabits represents user address space, kernel address space
is not included (user space and kernel space are both a half of total).
Here cpu_vabits, rather than cpu_vabits - 1, is to represent the size of
guest physical address space.
Also there is strict checking about page fault GPA address, inject error
if it is larger than maximum GPA address of VM.
Cc: stable@vger.kernel.org
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
On host, the HW guest CSR registers are lost after suspend and resume
operation. Since last_vcpu of boot CPU still records latest vCPU pointer
so that the guest CSR register skips to reload when boot CPU resumes and
vCPU is scheduled.
Here last_vcpu is cleared so that guest CSR registers will reload from
scheduled vCPU context after suspend and resume.
Cc: stable@vger.kernel.org
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
There is a newly added macro INT_AVEC with CSR ESTAT register, which is
bit 14 used for LoongArch AVEC support. AVEC interrupt status bit 14 is
supported with macro CSR_ESTAT_IS, so here replace the hard-coded value
0x1fff with macro CSR_ESTAT_IS so that the AVEC interrupt status is also
supported by KVM.
Cc: stable@vger.kernel.org
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
The current max_pfn equals to zero. In this case, it causes user cannot
get some page information through /proc filesystem such as kpagecount.
The following message is displayed by stress-ng test suite with command
"stress-ng --verbose --physpage 1 -t 1".
# stress-ng --verbose --physpage 1 -t 1
stress-ng: error: [1691] physpage: cannot read page count for address 0x134ac000 in /proc/kpagecount, errno=22 (Invalid argument)
stress-ng: error: [1691] physpage: cannot read page count for address 0x7ffff207c3a8 in /proc/kpagecount, errno=22 (Invalid argument)
stress-ng: error: [1691] physpage: cannot read page count for address 0x134b0000 in /proc/kpagecount, errno=22 (Invalid argument)
...
After applying this patch, the kernel can pass the test.
# stress-ng --verbose --physpage 1 -t 1
stress-ng: debug: [1701] physpage: [1701] started (instance 0 on CPU 3)
stress-ng: debug: [1701] physpage: [1701] exited (instance 0 on CPU 3)
stress-ng: debug: [1700] physpage: [1701] terminated (success)
Cc: stable@vger.kernel.org # 6.8+
Fixes: ff6c3d81f2 ("NUMA: optimize detection of memory with no node id assigned by firmware")
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
When CONFIG_RANDOM_KMALLOC_CACHES or other randomization infrastructrue
enabled, the idle_task's stack may different between the booting kernel
and target kernel. So when resuming from hibernation, an ACTION_BOOT_CPU
IPI wakeup the idle instruction in arch_cpu_idle_dead() and jump to the
interrupt handler. But since the stack pointer is changed, the interrupt
handler cannot restore correct context.
So rename the current arch_cpu_idle_dead() to idle_play_dead(), make it
as the default version of play_dead(), and the new arch_cpu_idle_dead()
call play_dead() directly. For hibernation, implement an arch-specific
hibernate_resume_nonboot_cpu_disable() to use the polling version (idle
instruction is replace by nop, and irq is disabled) of play_dead(), i.e.
poll_play_dead(), to avoid IPI handler corrupting the idle_task's stack
when resuming from hibernation.
This solution is a little similar to commit 406f992e4a ("x86 /
hibernate: Use hlt_play_dead() when resuming from hibernation").
Cc: stable@vger.kernel.org
Tested-by: Erpeng Xu <xuerpeng@uniontech.com>
Tested-by: Yuli Wang <wangyuli@uniontech.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
When compiling on LoongArch, there exists the following objtool warning
in arch/loongarch/kernel/machine_kexec.o:
kexec_reboot() falls through to next function crash_shutdown_secondary()
Avoid using unreachable() as it can (and will in the absence of UBSAN)
generate fall-through code. Use BUG() so we get a "break BRK_BUG" trap
(with unreachable annotation).
Cc: stable@vger.kernel.org # 6.12+
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
- Fix return address recovery of traced function in ftrace to ensure
reliable stack unwinding
- Fix compiler warnings and runtime crashes of vDSO selftests on s390 by
introducing a dedicated GNU hash bucket pointer with correct 32-bit
entry size
- Fix test_monitor_call() inline asm, which misses CC clobber, by
switching to an instruction that doesn't modify CC
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE3QHqV+H2a8xAv27vjYWKoQLXFBgFAmfLedEACgkQjYWKoQLX
FBhXMQf/bIaJEOV/Ww5PWY+AqtHPpQjhP2cvOfSRoh2py38Gp1sy/6ddpn8lcl3R
skyeW4XHLpARYGg6NNOAOgFr43c7wQYrr+7uSW0zska+hOlSOi5TtycEOgu7o+VE
Nig5XRuBPc01CBokFc+gbvMTjp2fTVlzTQ2/F/B7py62j2c21Y2/n7yZ4hhfQolM
oiWlRDXzCRHM/sfa3FlML6sSgfIcHhhMSZLpdmRDhir9vBm1VpeGHa+FM5V8Pzsk
KsiuoH7+ylbw+swVn2V/p3fqfS7JoopYdng8h40eLRkeHaTi052+NmMwv8gYAnCk
BxfC1re5KlZ6kgWh0CDLUoYQHdwHxw==
=KCjH
-----END PGP SIGNATURE-----
Merge tag 's390-6.14-6' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Vasily Gorbik:
- Fix return address recovery of traced function in ftrace to ensure
reliable stack unwinding
- Fix compiler warnings and runtime crashes of vDSO selftests on s390
by introducing a dedicated GNU hash bucket pointer with correct
32-bit entry size
- Fix test_monitor_call() inline asm, which misses CC clobber, by
switching to an instruction that doesn't modify CC
* tag 's390-6.14-6' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/ftrace: Fix return address recovery of traced function
selftests/vDSO: Fix GNU hash table entry size for s390x
s390/traps: Fix test_monitor_call() inline assembly
Andy reported the following build warning from head_32.S:
In file included from arch/x86/kernel/head_32.S:29:
arch/x86/include/asm/pgtable_32.h:59:5: error: "PTRS_PER_PMD" is not defined, evaluates to 0 [-Werror=undef]
59 | #if PTRS_PER_PMD > 1
The reason is that on 2-level i386 paging the folded in PMD's
PTRS_PER_PMD constant is not defined in assembly headers,
only in generic MM C headers.
Instead of trying to fish out the definition from the generic
headers, just define it - it even has a comment for it already...
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/Z8oa8AUVyi2HWfo9@gmail.com
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEe7vIQRWZI0iWSE3xu+CwddJFiJoFAmfLZNwACgkQu+CwddJF
iJphfAgAhdxxEauNscZhXTrFn8nNSu4znrWnt3jZIxCX+rg67wteB2FXChKG7c8f
38X7rtFH0mOdtvUsZADQEZ0BUmnGb/CJBTVwTMYQ/h57DmWKI6MdiJ0ddlB1beuY
lIGvjE/cHajbuz7mTlgLtpqR83sk7ADckap4Pa04t0FgRepDbtad/XEP/BLuvN9G
zme5x+7SOpSRBLsnKWJW87GgR3cs2XlfxUHaWQ4xiGEpaW5YSr0hec5M4YiriQ5f
kARYtyFyX/lIwWlJGQwlkYlyES5W8KlAIau+1olGjqTgB6nMODqFfnVO/YA1q/uU
zJJZolaO7kJBBv1AaRKxu5Rl2EpBvQ==
=H1UU
-----END PGP SIGNATURE-----
Merge tag 'slab-for-6.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab fix from Vlastimil Babka:
- Stable fix for kmem_cache_destroy() called from a WQ_MEM_RECLAIM
workqueue causing a warning due to the new kvfree_rcu_barrier()
(Uladzislau Rezki)
* tag 'slab-for-6.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
mm/slab/kvfree_rcu: Switch to WQ_MEM_RECLAIM wq
Restore the previous behavior of the ACPI platform_profile sysfs
interface that has been changed recently in a way incompatible
with the existing user space (Mario Limonciello).
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEcM8Aw/RY0dgsiRUR7l+9nS/U47UFAmfLW54SHHJqd0Byand5
c29ja2kubmV0AAoJEO5fvZ0v1OO1VOUIAJwwmxAcJGHxbOPvK5r7jO/Rq4XFbMuT
ftNEX+awNFcBFtm7dgxhTjqZUFDDntvB/+BDuBMz1xsP2QRsW38R84hiVlJgisT1
XlMdqXalYQgN/MEQvS22AudyLBuWw1+/i9d8rZOf73wA9thOt5KrJa5IIieT1oJe
kd5Kf3onrmwSv5h38NqKkUzO2QdY5rluUG47HIaiNpe+HODDwf2NU335CUV4V69q
t6LKEoiSJ7Ziv7a5morXXu2Y26eTjK9kG8insGCgp/oK+nyxx5K8a7i/d8Hlp92b
X21G4P278lYTBDR4QoJrhKPyLqvNUx9qQ7KHXrNPZGY/c+g31yfvWC8=
=c0sa
-----END PGP SIGNATURE-----
Merge tag 'acpi-6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Restore the previous behavior of the ACPI platform_profile sysfs
interface that has been changed recently in a way incompatible with
the existing user space (Mario Limonciello)"
* tag 'acpi-6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
platform/x86/amd: pmf: Add balanced-performance to hidden choices
platform/x86/amd: pmf: Add 'quiet' to hidden choices
ACPI: platform_profile: Add support for hidden choices
- coredump: Only sort VMAs when core_sort_vma sysctl is set
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRSPkdeREjth1dHnSE2KwveOeQkuwUCZ8tUbwAKCRA2KwveOeQk
u7VHAQDde9UqJ/meeBFhsEW7Fn3dMDL0bTTAJTKMw1YV4D7IiQEAjHBz9JKqrvXO
pAMV9IoPsjpDKnz9aUWW+geJhjPsLQ8=
=RFog
-----END PGP SIGNATURE-----
Merge tag 'execve-v6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull core dumping fix from Kees Cook:
- Only sort VMAs when core_sort_vma sysctl is set
* tag 'execve-v6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
coredump: Only sort VMAs when core_sort_vma sysctl is set
-----BEGIN PGP SIGNATURE-----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=v6KI
-----END PGP SIGNATURE-----
Merge tag 'for-6.14-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fix leaked extent map after error when reading chunks
- replace use of deprecated strncpy
- in zoned mode, fixed range when ulocking extent range, causing a hang
* tag 'for-6.14-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix a leaked chunk map issue in read_one_chunk()
btrfs: replace deprecated strncpy() with strscpy()
btrfs: zoned: fix extent range end unlock in cow_file_range()
-----BEGIN PGP SIGNATURE-----
iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmfKQvsQHGF4Ym9lQGtl
cm5lbC5kawAKCRD301j7KXHgpnBCD/9bVSGHNnXakVwdpQmtU5zy54cyWd7VaYsz
qeM+Vrl1m5nf8q5ZdEXcM11Ruib3YJiW0GN9d9sWpTwt8C5n8g+8F63koS7GordZ
jcv77nO6FlnwWpm3YlNxAeLuxkl15e4MQIKj/jb540iFygzT8H2lygE816K4kpCX
XuMxNxdSMksntovZufzxo3Sfkm6e6GChCkkqvBxuXiEWFhvbFQ/ZLEsEMtoH4hkI
3Nj1VB3B3pLVCZhWr2uVvcZCiYUDyBslu+SA3RRoX0W6beK1cVI4OQdS8GtnkJf3
qFnLQz0Ib3EVDtugqg7ZGSAAov6Z8waA2MrFeZkG8uIfl4WT3kBfoan7jRX3Mknl
VnFkThyJOzB83OKqlZKjCzYmEzBhKJrRJVtneIrxT+gvEpevFvAQil6SQfyPDwno
4YcUD+IfU/daTdVR58QQ/iLzkQ7stQWYCtZSrICKfcAGy6zswKM5P5uoWltMBwQh
aHsyz9xbmsMrxch1DPRb0T2GD2h9BsiL6rT8JCrOgucMuOYeZL9pNRgz16D/hael
wBCxPcanSdap0N9kiMX8fLYYdmRxpJHzTbeNRsPhZe8HKUPu1sYTbisOou1XSdAW
Dv7zeQWVlw+1cn/S1Y6Oc4mdlPzPTA9szuBXVpbe9Gd7ZqO7sbbKEkGu5w6MGSZ1
oubnZKCNvA==
=jKDe
-----END PGP SIGNATURE-----
Merge tag 'block-6.14-20250306' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
- NVMe pull request via Keith:
- TCP use after free fix on polling (Sagi)
- Controller memory buffer cleanup fixes (Icenowy)
- Free leaking requests on bad user passthrough commands (Keith)
- TCP error message fix (Maurizio)
- TCP corruption fix on partial PDU (Maurizio)
- TCP memory ordering fix for weakly ordered archs (Meir)
- Type coercion fix on message error for TCP (Dan)
- Name the RQF flags enum, fixing issues with anon enums and BPF import
of it
- ublk parameter setting fix
- GPT partition 7-bit conversion fix
* tag 'block-6.14-20250306' of git://git.kernel.dk/linux:
block: Name the RQF flags enum
nvme-tcp: fix signedness bug in nvme_tcp_init_connection()
block: fix conversion of GPT partition name to 7-bit
ublk: set_params: properly check if parameters can be applied
nvmet-tcp: Fix a possible sporadic response drops in weakly ordered arch
nvme-tcp: fix potential memory corruption in nvme_tcp_recv_pdu()
nvme-tcp: Fix a C2HTermReq error message
nvmet: remove old function prototype
nvme-ioctl: fix leaked requests on mapping error
nvme-pci: skip CMB blocks incompatible with PCI P2P DMA
nvme-pci: clean up CMBMSC when registering CMB fails
nvme-tcp: fix possible UAF in nvme_tcp_poll
-----BEGIN PGP SIGNATURE-----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=v5sq
-----END PGP SIGNATURE-----
Merge tag 'io_uring-6.14-20250306' of git://git.kernel.dk/linux
Pull io_uring fix from Jens Axboe:
"A single fix for a regression introduced in the 6.14 merge window,
causing stalls/hangs with IOPOLL reads or writes"
* tag 'io_uring-6.14-20250306' of git://git.kernel.dk/linux:
io_uring/rw: ensure reissue path is correctly handled for IOPOLL
