The chip supports reading and writing the conversion rate.
Add support for the update_interval sysfs attribute.
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Convert driver to with_info hwmon API to simplify the code and
with it its maintainability.
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Use regmap for local caching, to hide register read/write address
differences, and for multi-byte operations. With this change,
the driver specific lock is no longer necessary.
While at it, check errors seen when initializing the chip and bail out
if chip initialization fails.
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Bit 0, 5, and 6 in the status register are reserved and, if set, do not
indicate an alarm. Bit 7 is the 'busy' bit and also does not indicate
an alarm. Mask the non-alarm bits to avoid reporting them to userspace.
Cc: Tzung-Bi Shih <tzungbi@kernel.org>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Module test code reports underflows when writing sensor limits.
temp2_min: Suspected underflow: [min=-77000, read 101000, written -2147483648]
temp2_max: Suspected underflow: [min=-77000, read 101000, written -2147483648]
temp2_crit: Suspected underflow: [min=-77000, read 101000, written -2147483648]
Clamp temperature ranges when writing limits to fix the problem.
While at it, use sign_extend32() when reading temperatures to make
the code easier to understand.
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
In the MAX6581 datasheet Revision 0 to 3, the local channel overtemperature
status is reported in bit 6 of register 0x45, and the overtemperature
status for remote channel 7 is reported in bit 7. In Revision 4 and later,
the local channel overtemperature status is reported in bit 7, and the
remote channel 7 overtemperature status is reported in bit 6. A real
chip was found to match the functionality documented in Revision 4 and
later.
The code was fixed with commit 1ea3fd1eb9 ("hwmon: (max6697) Fix swapped
temp{1,8} critical alarms"). At that time it looked like this was an
original bug. It only turned out later that the problem was the result of
incorrect information in the chip datasheet.
Document the discrepancy to avoid confusion caused by old versions of the
datasheet.
Cc: Tzung-Bi Shih <tzungbi@kernel.org>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Convert to use with_info API to simplify the code and to reduce its size.
This patch reduces object file size by approximately 25%.
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The only difference between supported chips is the number of channels.
Drop enum chips and list the number of channels in struct i2c_device_id
directly.
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Use regmap for caching to simplify the code and to hide read/write
register address differences.
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Use bit macro to make the code easier to understand and reduce duplication.
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reorder include files to alphabetic order to simplify driver maintenance.
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Use the device property APIs so the driver does not depend on OF to
work.
While at it, properly include mod_devicetable for struct of_device_id
and fix some parameter alignment in the changed places.
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240726-dev-hwmon-ltc6947-fw-agnostic-v1-1-f7d6cab7d438@analog.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
By default the PWM duty cycle in hardware is 100%. On some systems this
can cause unwanted fan noise. Add the ability to specify the fan
connections and initial state of the PWMs via device properties.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Link: https://lore.kernel.org/r/20240722221737.3407958-4-chris.packham@alliedtelesis.co.nz
[groeck: Cleaned up formatting]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Now that we have fan child nodes that can specify flags for the PWM
outputs we no longer need the adi,pwm-active-state property.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240722221737.3407958-3-chris.packham@alliedtelesis.co.nz
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add fan child nodes that allow describing the connections for the
ADT7475 to the fans it controls. This also allows setting some
initial values for the pwm duty cycle and frequency.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240722221737.3407958-2-chris.packham@alliedtelesis.co.nz
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
MAX6581 supports setting the minimum temperature as well as minimum
temperature alarms. Add support for it.
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Convert to with_info hwmon API to simplify the code and reduce its size.
This patch reduces object file size by approximately 25%.
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Use regmap for register caching, and use regmap API for bit operations
to simplify the code.
This patch reduces object file size by approximately 10%.
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Platform data is not used anywhere in the upstram kernel.
Drop support for it to simplify code maintenance.
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reorder include files to alphabetic order to improve maintainability.
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Chips reporting overcurrent alarms report it in the second alarm register.
That means the second alarm register has to be read, even if the chip only
supports 8 or fewer ADC channels.
MAX16067 and MAX16068 report undervoltage and overvoltage alarms in
separate registers. Fold register contents together to report both with
the existing alarm attribute. This requires actually storing the chip type
in struct max16065_data. Rename the variable 'chip' to match the variable
name used in the probe function.
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Fixes: f5bae2642e ("hwmon: Driver for MAX16065 System Manager and compatibles")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Writing large limits resulted in overflows as reported by module tests.
in0_lcrit: Suspected overflow: [max=5538, read 0, written 2147483647]
in0_crit: Suspected overflow: [max=5538, read 0, written 2147483647]
in0_min: Suspected overflow: [max=5538, read 0, written 2147483647]
Fix the problem by clamping prior to multiplications and the use of
DIV_ROUND_CLOSEST, and by using consistent variable types.
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Fixes: f5bae2642e ("hwmon: Driver for MAX16065 System Manager and compatibles")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The iterated nodes are direct children of the device node, and the
`device_for_each_child_node()` macro accounts for child node
availability.
`fwnode_for_each_available_child_node()` is meant to access the child
nodes of an fwnode, and therefore not direct child nodes of the device
node.
In this case, the child nodes are not required outside the loop, and
the scoped version of the macro can be used to remove the repetitive
`goto put` pattern.
Use `device_for_each_child_node_scoped_scoped()` to indicate device's
direct child nodes.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240721-device_for_each_child_node-available-v2-2-f33748fd8b2d@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Use multi-byte regmap operations to simplify the code
and to reduce dependency on locking.
No functional change.
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
LM95233/LM95234 support enabling temperature channels one by one.
Add support for tempX_enable attribute to be able to use that
functionality.
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Convert to with_info API to simplify the code and reduce its size.
This patch reduces the object file size by about 30%.
No functional change.
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Use regmap to replace local caching and to be able to use regmap API
functions.
No functional change.
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Use find_closest() instead of manually coding it to find best update
interval.
Since find_closest() uses rounding to find the best match, the resulting
update interval will now reflect the update interval that is closest to
the requested value, not the value that is lower or equal to the requested
value.
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Alphabetic include file order simplifies maintenance and makes it easier
to add or remove files.
No functional change.
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Use multi-byte regmap operations where possible to reduce code size.
No functional changes.
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Use multi-byte regmap operations where possible to reduce code size
and the need for mutex protection.
No functional changes.
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Use multi-byte regmap operations where possible to reduce code size
and the need for mutex protection.
No functional changes.
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Use multi-byte regmap operations where possible to reduce code size
and the need for mutex protection.
No functional changes.
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Use multi-byte regmap operations where possible to reduce code size
and the need for mutex protection.
No functional changes.
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Use multi-byte regmap operations where possible to reduce code size
and the need for mutex protection.
No functional change.
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Use multi-byte regmap operations where possible to reduce code size
and the need for mutex protection.
No functional change.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Use multi-byte regmap operations where possible to reduce code size
and the need for mutex protection.
No functional change.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
- Fix RPM package build error caused by an incorrect locale setup
- Mark modules.weakdep as ghost in RPM package
- Fix the odd combination of -S and -c in stack protector scripts, which
is an error with the latest Clang
-----BEGIN PGP SIGNATURE-----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=HYew
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Fix RPM package build error caused by an incorrect locale setup
- Mark modules.weakdep as ghost in RPM package
- Fix the odd combination of -S and -c in stack protector scripts,
which is an error with the latest Clang
* tag 'kbuild-fixes-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: Fix '-S -c' in x86 stack protector scripts
kbuild: rpm-pkg: ghost modules.weakdep file
kbuild: rpm-pkg: Fix C locale setup
This simplifies the min_t() and max_t() macros by no longer making them
work in the context of a C constant expression.
That means that you can no longer use them for static initializers or
for array sizes in type definitions, but there were only a couple of
such uses, and all of them were converted (famous last words) to use
MIN_T/MAX_T instead.
Cc: David Laight <David.Laight@aculab.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 3a7e02c040 ("minmax: avoid overly complicated constant
expressions in VM code") added the simpler MIN_T/MAX_T macros in order
to avoid some excessive expansion from the rather complicated regular
min/max macros.
The complexity of those macros stems from two issues:
(a) trying to use them in situations that require a C constant
expression (in static initializers and for array sizes)
(b) the type sanity checking
and MIN_T/MAX_T avoids both of these issues.
Now, in the whole (long) discussion about all this, it was pointed out
that the whole type sanity checking is entirely unnecessary for
min_t/max_t which get a fixed type that the comparison is done in.
But that still leaves min_t/max_t unnecessarily complicated due to
worries about the C constant expression case.
However, it turns out that there really aren't very many cases that use
min_t/max_t for this, and we can just force-convert those.
This does exactly that.
Which in turn will then allow for much simpler implementations of
min_t()/max_t(). All the usual "macros in all upper case will evaluate
the arguments multiple times" rules apply.
We should do all the same things for the regular min/max() vs MIN/MAX()
cases, but that has the added complexity of various drivers defining
their own local versions of MIN/MAX, so that needs another level of
fixes first.
Link: https://lore.kernel.org/all/b47fad1d0cf8449886ad148f8c013dae@AcuMS.aculab.com/
Cc: David Laight <David.Laight@aculab.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Many fixes for power-cut issues by Zhihao Cheng
- Another ubiblock error path fix
- ubiblock section mismatch fix
- Misc fixes all over the place
-----BEGIN PGP SIGNATURE-----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=0y6/
-----END PGP SIGNATURE-----
Merge tag 'ubifs-for-linus-6.11-rc1-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs
Pull UBI and UBIFS updates from Richard Weinberger:
- Many fixes for power-cut issues by Zhihao Cheng
- Another ubiblock error path fix
- ubiblock section mismatch fix
- Misc fixes all over the place
* tag 'ubifs-for-linus-6.11-rc1-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs:
ubi: Fix ubi_init() ubiblock_exit() section mismatch
ubifs: add check for crypto_shash_tfm_digest
ubifs: Fix inconsistent inode size when powercut happens during appendant writing
ubi: block: fix null-pointer-dereference in ubiblock_create()
ubifs: fix kernel-doc warnings
ubifs: correct UBIFS_DFS_DIR_LEN macro definition and improve code clarity
mtd: ubi: Restore missing cleanup on ubi_init() failure path
ubifs: dbg_orphan_check: Fix missed key type checking
ubifs: Fix unattached inode when powercut happens in creating
ubifs: Fix space leak when powercut happens in linking tmpfile
ubifs: Move ui->data initialization after initializing security
ubifs: Fix adding orphan entry twice for the same inode
ubifs: Remove insert_dead_orphan from replaying orphan process
Revert "ubifs: ubifs_symlink: Fix memleak of inode->i_link in error path"
ubifs: Don't add xattr inode into orphan area
ubifs: Fix unattached xattr inode if powercut happens after deleting
mtd: ubi: avoid expensive do_div() on 32-bit machines
mtd: ubi: make ubi_class constant
ubi: eba: properly rollback inside self_check_eba
After a recent change in clang to stop consuming all instances of '-S'
and '-c' [1], the stack protector scripts break due to the kernel's use
of -Werror=unused-command-line-argument to catch cases where flags are
not being properly consumed by the compiler driver:
$ echo | clang -o - -x c - -S -c -Werror=unused-command-line-argument
clang: error: argument unused during compilation: '-c' [-Werror,-Wunused-command-line-argument]
This results in CONFIG_STACKPROTECTOR getting disabled because
CONFIG_CC_HAS_SANE_STACKPROTECTOR is no longer set.
'-c' and '-S' both instruct the compiler to stop at different stages of
the pipeline ('-S' after compiling, '-c' after assembling), so having
them present together in the same command makes little sense. In this
case, the test wants to stop before assembling because it is looking at
the textual assembly output of the compiler for either '%fs' or '%gs',
so remove '-c' from the list of arguments to resolve the error.
All versions of GCC continue to work after this change, along with
versions of clang that do or do not contain the change mentioned above.
Cc: stable@vger.kernel.org
Fixes: 4f7fd4d7a7 ("[PATCH] Add the -fstack-protector option to the CFLAGS")
Fixes: 60a5317ff0 ("x86: implement x86_32 stack protector")
Link: 6461e53781 [1]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Since ubiblock_exit() is now called from an init function,
the __exit section no longer makes sense.
Cc: Ben Hutchings <bwh@kernel.org>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202407131403.wZJpd8n2-lkp@intel.com/
Signed-off-by: Richard Weinberger <richard@nod.at>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Enable turbostat extensions to add both perf and PMT
(Intel Platform Monitoring Technology) counters via the cmdline.
Demonstrate PMT access with built-in support for Meteor Lake's Die%c6 counter.
-----BEGIN PGP SIGNATURE-----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=wsSy
-----END PGP SIGNATURE-----
Merge tag 'v6.11-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux
Pull turbostat updates from Len Brown:
- Enable turbostat extensions to add both perf and PMT (Intel
Platform Monitoring Technology) counters via the cmdline
- Demonstrate PMT access with built-in support for Meteor Lake's
Die C6 counter
* tag 'v6.11-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
tools/power turbostat: version 2024.07.26
tools/power turbostat: Include umask=%x in perf counter's config
tools/power turbostat: Document PMT in turbostat.8
tools/power turbostat: Add MTL's PMT DC6 builtin counter
tools/power turbostat: Add early support for PMT counters
tools/power turbostat: Add selftests for added perf counters
tools/power turbostat: Add selftests for SMI, APERF and MPERF counters
tools/power turbostat: Move verbose counter messages to level 2
tools/power turbostat: Move debug prints from stdout to stderr
tools/power turbostat: Fix typo in turbostat.8
tools/power turbostat: Add perf added counter example to turbostat.8
tools/power turbostat: Fix formatting in turbostat.8
tools/power turbostat: Extend --add option with perf counters
tools/power turbostat: Group SMI counter with APERF and MPERF
tools/power turbostat: Add ZERO_ARRAY for zero initializing builtin array
tools/power turbostat: Replace enum rapl_source and cstate_source with counter_source
tools/power turbostat: Remove anonymous union from rapl_counter_info_t
tools/power/turbostat: Switch to new Intel CPU model defines
New Changes:
- Refactor to a common struct for DRAM and general media CXL events
- Add abstract distance calculation support for CXL
- Add CXL maturity map documentation to detail current state of CXL enabling
- Add warning on mixed CXL VH and RCH/RCD hierachy to inform unsupported config
- Replace ENXIO with EBUSY for inject poison limit reached via debugfs
- Replace ENXIO with EBUSY for inject poison cxl-test support
- XOR math fixup for DPA to SPA translation. Current math works for MODULO arithmetic
where HPA==SPA, however not for XOR decode.
- Move pci config read in cxl_dvsec_rr_decode() to avoid unnecessary acess
Fixes:
- Add a fix to address race condition in CXL memory hotplug notifier
- Add missing MODULE_DESCRIPTION() for CXL modules
- Fix incorrect vendor debug UUID define
-----BEGIN PGP SIGNATURE-----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=HaEG
-----END PGP SIGNATURE-----
Merge tag 'cxl-for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull CXL updates from Dave Jiang:
"Core:
- A CXL maturity map has been added to the documentation to detail
the current state of CXL enabling.
It provides the status of the current state of various CXL features
to inform current and future contributors of where things are and
which areas need contribution.
- A notifier handler has been added in order for a newly created CXL
memory region to trigger the abstract distance metrics calculation.
This should bring parity for CXL memory to the same level vs
hotplugged DRAM for NUMA abstract distance calculation. The
abstract distance reflects relative performance used for memory
tiering handling.
- An addition for XOR math has been added to address the CXL DPA to
SPA translation.
CXL address translation did not support address interleave math
with XOR prior to this change.
Fixes:
- Fix to address race condition in the CXL memory hotplug notifier
- Add missing MODULE_DESCRIPTION() for CXL modules
- Fix incorrect vendor debug UUID define
Misc:
- A warning has been added to inform users of an unsupported
configuration when mixing CXL VH and RCH/RCD hierarchies
- The ENXIO error code has been replaced with EBUSY for inject poison
limit reached via debugfs and cxl-test support
- Moving the PCI config read in cxl_dvsec_rr_decode() to avoid
unnecessary PCI config reads
- A refactor to a common struct for DRAM and general media CXL
events"
* tag 'cxl-for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl/core/pci: Move reading of control register to immediately before usage
cxl: Remove defunct code calculating host bridge target positions
cxl/region: Verify target positions using the ordered target list
cxl: Restore XOR'd position bits during address translation
cxl/core: Fold cxl_trace_hpa() into cxl_dpa_to_hpa()
cxl/test: Replace ENXIO with EBUSY for inject poison limit reached
cxl/memdev: Replace ENXIO with EBUSY for inject poison limit reached
cxl/acpi: Warn on mixed CXL VH and RCH/RCD Hierarchy
cxl/core: Fix incorrect vendor debug UUID define
Documentation: CXL Maturity Map
cxl/region: Simplify cxl_region_nid()
cxl/region: Support to calculate memory tier abstract distance
cxl/region: Fix a race condition in memory hotplug notifier
cxl: add missing MODULE_DESCRIPTION() macros
cxl/events: Use a common struct for DRAM and General Media events
