commit 26e4550649 upstream.
With the introduction of 8-bit formats the DMIC blob lookup also needs to
be modified to prefer the 32-bit blob when 8-bit format is used on FE.
At the same time we also need to make sure that in case 8-bit format is
used, but only 16-bit blob is available for DMIC then we will not try to
look for 8-bit blob (which is invalid) as fallback, but for a 16-bit one.
Fixes: c04c2e8296 ("ASoC: SOF: ipc4-topology: Add support for 8-bit formats")
Cc: stable@vger.kernel.org
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://patch.msgid.link/20251215120648.4827-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 913f7cf77b upstream.
An NFSv4 client that sets an ACL with a named principal during file
creation retrieves the ACL afterwards, and finds that it is only a
default ACL (based on the mode bits) and not the ACL that was
requested during file creation. This violates RFC 8881 section
6.4.1.3: "the ACL attribute is set as given".
The issue occurs in nfsd_create_setattr(), which calls
nfsd_attrs_valid() to determine whether to call nfsd_setattr().
However, nfsd_attrs_valid() checks only for iattr changes and
security labels, but not POSIX ACLs. When only an ACL is present,
the function returns false, nfsd_setattr() is skipped, and the
POSIX ACL is never applied to the inode.
Subsequently, when the client retrieves the ACL, the server finds
no POSIX ACL on the inode and returns one generated from the file's
mode bits rather than returning the originally-specified ACL.
Reported-by: Aurélien Couderc <aurelien.couderc2002@gmail.com>
Fixes: c0cbe70742 ("NFSD: add posix ACLs to struct nfsd_attrs")
Cc: Roland Mainz <roland.mainz@nrubsig.org>
Cc: stable@vger.kernel.org
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 27d17641ca upstream.
>From RFC 8881:
5.8.1.14. Attribute 75: suppattr_exclcreat
> The bit vector that would set all REQUIRED and RECOMMENDED
> attributes that are supported by the EXCLUSIVE4_1 method of file
> creation via the OPEN operation. The scope of this attribute
> applies to all objects with a matching fsid.
There's nothing in RFC 8881 that states that suppattr_exclcreat is
or is not allowed to contain bits for attributes that are clear in
the reported supported_attrs bitmask. But it doesn't make sense for
an NFS server to indicate that it /doesn't/ implement an attribute,
but then also indicate that clients /are/ allowed to set that
attribute using OPEN(create) with EXCLUSIVE4_1.
Ensure that the SECURITY_LABEL and ACL bits are not set in the
suppattr_exclcreat bitmask when they are also not set in the
supported_attrs bitmask.
Fixes: 8c18f2052e ("nfsd41: SUPPATTR_EXCLCREAT attribute")
Cc: stable@vger.kernel.org
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6af2a01d65 upstream.
handshake_req_submit() replaces sk->sk_destruct but never restores it when
submission fails before the request is hashed. handshake_sk_destruct() then
returns early and the original destructor never runs, leaking the socket.
Restore sk_destruct on the error path.
Fixes: 3b3009ea8a ("net/handshake: Create a NETLINK service for handling handshake requests")
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Cc: stable@vger.kernel.org
Signed-off-by: caoping <caoping@cmss.chinamobile.com>
Link: https://patch.msgid.link/20251204091058.1545151-1-caoping@cmss.chinamobile.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 635bc4def0 upstream.
inotify/fanotify do not allow users with no read access to a file to
subscribe to events (e.g. IN_ACCESS/IN_MODIFY), but they do allow the
same user to subscribe for watching events on children when the user
has access to the parent directory (e.g. /dev).
Users with no read access to a file but with read access to its parent
directory can still stat the file and see if it was accessed/modified
via atime/mtime change.
The same is not true for special files (e.g. /dev/null). Users will not
generally observe atime/mtime changes when other users read/write to
special files, only when someone sets atime/mtime via utimensat().
Align fsnotify events with this stat behavior and do not generate
ACCESS/MODIFY events to parent watchers on read/write of special files.
The events are still generated to parent watchers on utimensat(). This
closes some side-channels that could be possibly used for information
exfiltration [1].
[1] https://snee.la/pdf/pubs/file-notification-attacks.pdf
Reported-by: Sudheendra Raghav Neela <sneela@tugraz.at>
CC: stable@vger.kernel.org
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c4cdf73762 upstream.
The local variable 'val' was never clamped to -75000 or 180000 because
the return value of clamp_val() was not used. Fix this by assigning the
clamped value back to 'val', and use clamp() instead of clamp_val().
Cc: stable@vger.kernel.org
Fixes: a557a92e68 ("net: phy: marvell-88q2xxx: add support for temperature sensor")
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Dimitri Fedrau <dima.fedrau@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20251202172743.453055-3-thorsten.blum@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dd75c723ef upstream.
Wake-on-Lan does currently not work for r8169 in DASH mode, e.g. the
ASUS Pro WS X570-ACE with RTL8168fp/RTL8117.
Fix by not returning early in rtl_prepare_power_down when dash_enabled.
While this fixes WoL, it still kills the OOB RTL8117 remote management
BMC connection. Fix by not calling rtl8168_driver_stop if WoL is enabled.
Fixes: 065c27c184 ("r8169: phy power ops")
Signed-off-by: René Rebe <rene@exactco.de>
Cc: stable@vger.kernel.org
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/20251202.194137.1647877804487085954.rene@exactco.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5a0b188250 upstream.
poly1305-core.S is an auto-generated file, so it should be ignored.
Fixes: bef9c75598 ("lib/crypto: riscv/poly1305: Import OpenSSL/CRYPTOGAMS implementation")
Cc: stable@vger.kernel.org
Signed-off-by: Charles Mirabile <cmirabil@redhat.com>
Link: https://lore.kernel.org/r/20251212184717.133701-1-cmirabil@redhat.com
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 98a97bf415 upstream.
When we exec a new task we forget to flush the set of locked GCS mode bits.
Since we do flush the rest of the state this means that if GCS is locked
the new task will be unable to enable GCS, it will be locked as being
disabled. Add the expected flush.
Fixes: fc84bc5378 ("arm64/gcs: Context switch GCS state for EL0")
Cc: <stable@vger.kernel.org> # 6.13.x
Reported-by: Yury Khrustalev <Yury.Khrustalev@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Tested-by: Yury Khrustalev <yury.khrustalev@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 359afc8eb0 upstream.
Commit 89d9cec3b1 ("PM: runtime: Clear power.needs_force_resume in
pm_runtime_reinit()") added provisional clearing of power.needs_force_resume
to pm_runtime_reinit(), but it is done unconditionally which is a
mistake because pm_runtime_reinit() may race with driver probing
and removal [1].
To address this, notice that power.needs_force_resume should never
be set when runtime PM is enabled and so it only needs to be cleared
when runtime PM is disabled, and update pm_runtime_init() to only
clear that flag when runtime PM is disabled.
Fixes: 89d9cec3b1 ("PM: runtime: Clear power.needs_force_resume in pm_runtime_reinit()")
Reported-by: Ed Tsai <ed.tsai@mediatek.com>
Closes: https://lore.kernel.org/linux-pm/20251215122154.3180001-1-ed.tsai@mediatek.com/ [1]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: 6.17+ <stable@vger.kernel.org> # 6.17+
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/12807571.O9o76ZdvQC@rafael.j.wysocki
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 982d2616a2 upstream.
Garbage collection assumes all zones contain the full amount of blocks.
Mkfs already ensures this happens, but make the kernel check it as well
to avoid getting into trouble due to fuzzers or mkfs bugs.
Fixes: 2167eaabe2 ("xfs: define the zoned on-disk format")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Cc: stable@vger.kernel.org # v6.15
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5990fd7569 upstream.
The xchk_setup_xattr_buf function can allocate a new value buffer, which
means that any reference to ab->value before the call could become a
dangling pointer. Fix this by moving an assignment to after the buffer
setup.
Cc: stable@vger.kernel.org # v6.10
Fixes: e47dcf113a ("xfs: repair extended attributes")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dc68c0f601 upstream.
The grofs code for zoned RT subvolums already tries to check for zone
alignment, but gets it wrong by using the old instead of the new mount
structure.
Fixes: 01b71e64bb ("xfs: support growfs on zoned file systems")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Cc: stable@vger.kernel.org # v6.15
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f067250520 upstream.
gcc 14.2 warns about:
xfs_attr_item.c: In function ‘xfs_attr_recover_work’:
xfs_attr_item.c:785:9: warning: ‘ip’ may be used uninitialized [-Wmaybe-uninitialized]
785 | xfs_trans_ijoin(tp, ip, 0);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
xfs_attr_item.c:740:42: note: ‘ip’ was declared here
740 | struct xfs_inode *ip;
| ^~
I think this is bogus since xfs_attri_recover_work either returns a real
pointer having initialized ip or an ERR_PTR having not touched it, but
the tools are smarter than me so let's just null-init the variable
anyway.
Cc: stable@vger.kernel.org # v6.8
Fixes: e70fb328d5 ("xfs: recreate work items when recovering intent items")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fc40459de8 upstream.
xfs_buf_item_get_format() may allocate memory for bip->bli_formats,
free the memory in the error path.
Fixes: c3d5f0c2fb ("xfs: complain if anyone tries to create a too-large buffer log item")
Cc: stable@vger.kernel.org
Signed-off-by: Haoxiang Li <lihaoxiang@isrc.iscas.ac.cn>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1b9439c933 upstream.
In commit 0297cdc12a ("KVM: selftests: Add option to rseq test to
override /dev/cpu_dma_latency"), a 'break' is missed before the option
'l' in the argument parsing loop, which leads to an unexpected core
dump in atoi_paranoid(). It tries to get the latency from non-existent
argument.
host$ ./rseq_test -u
Random seed: 0x6b8b4567
Segmentation fault (core dumped)
Add a 'break' before the option 'l' in the argument parsing loop to avoid
the unexpected core dump.
Fixes: 0297cdc12a ("KVM: selftests: Add option to rseq test to override /dev/cpu_dma_latency")
Cc: stable@vger.kernel.org # v6.15+
Signed-off-by: Gavin Shan <gshan@redhat.com>
Link: https://patch.msgid.link/20251124050427.1924591-1-gshan@redhat.com
[sean: describe code change in shortlog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e2b43fb252 upstream.
When handling KVM_SET_CPUID{,2}, do runtime CPUID updates on the vCPU's
current CPUID (and caps) prior to swapping in the incoming CPUID state so
that KVM doesn't lose pending updates if the incoming CPUID is rejected,
and to prevent a false failure on the equality check.
Note, runtime updates are unconditionally performed on the incoming/new
CPUID (and associated caps), i.e. clearing the dirty flag won't negatively
affect the new CPUID.
Fixes: 93da6af3ae ("KVM: x86: Defer runtime updates of dynamic CPUID bits until CPUID emulation")
Reported-by: Igor Mammedov <imammedo@redhat.com>
Closes: https://lore.kernel.org/all/20251128123202.68424a95@imammedo
Cc: stable@vger.kernel.org
Acked-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
Link: https://patch.msgid.link/20251202015049.1167490-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit da01f64e74 upstream.
Explicitly clear exit_code_hi in the VMCB when synthesizing "normal"
nested VM-Exits, as the full exit code is a 64-bit value (spoiler alert),
and all exit codes for non-failing VMRUN use only bits 31:0.
Cc: Jim Mattson <jmattson@google.com>
Cc: Yosry Ahmed <yosry.ahmed@linux.dev>
Cc: stable@vger.kernel.org
Reviewed-by: Yosry Ahmed <yosry.ahmed@linux.dev>
Link: https://patch.msgid.link/20251113225621.1688428-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f402ecd7a8 upstream.
Set exit_code_hi to -1u as a temporary band-aid to fix a long-standing
(effectively since KVM's inception) bug where KVM treats the exit code as
a 32-bit value, when in reality it's a 64-bit value. Per the APM, offset
0x70 is a single 64-bit value:
070h 63:0 EXITCODE
And a sane reading of the error values defined in "Table C-1. SVM Intercept
Codes" is that negative values use the full 64 bits:
–1 VMEXIT_INVALID Invalid guest state in VMCB.
–2 VMEXIT_BUSYBUSY bit was set in the VMSA
–3 VMEXIT_IDLE_REQUIREDThe sibling thread is not in an idle state
-4 VMEXIT_INVALID_PMC Invalid PMC state
And that interpretation is confirmed by testing on Milan and Turin (by
setting bits in CR0[63:32] to generate VMEXIT_INVALID on VMRUN).
Furthermore, Xen has treated exitcode as a 64-bit value since HVM support
was adding in 2006 (see Xen commit d1bd157fbc ("Big merge the HVM
full-virtualisation abstractions.")).
Cc: Jim Mattson <jmattson@google.com>
Cc: Yosry Ahmed <yosry.ahmed@linux.dev>
Cc: stable@vger.kernel.org
Reviewed-by: Yosry Ahmed <yosry.ahmed@linux.dev>
Link: https://patch.msgid.link/20251113225621.1688428-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2976313883 upstream.
If an APICv status updated was pended while L2 was active, immediately
refresh vmcs01's controls instead of pending KVM_REQ_APICV_UPDATE as
kvm_vcpu_update_apicv() only calls into vendor code if a change is
necessary.
E.g. if APICv is inhibited, and then activated while L2 is running:
kvm_vcpu_update_apicv()
|
-> __kvm_vcpu_update_apicv()
|
-> apic->apicv_active = true
|
-> vmx_refresh_apicv_exec_ctrl()
|
-> vmx->nested.update_vmcs01_apicv_status = true
|
-> return
Then L2 exits to L1:
__nested_vmx_vmexit()
|
-> kvm_make_request(KVM_REQ_APICV_UPDATE)
vcpu_enter_guest(): KVM_REQ_APICV_UPDATE
-> kvm_vcpu_update_apicv()
|
-> __kvm_vcpu_update_apicv()
|
-> return // because if (apic->apicv_active == activate)
Reported-by: Chao Gao <chao.gao@intel.com>
Closes: https://lore.kernel.org/all/aQ2jmnN8wUYVEawF@intel.com
Fixes: 7c69661e22 ("KVM: nVMX: Defer APICv updates while L2 is active until L1 is active")
Cc: stable@vger.kernel.org
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
[sean: write changelog]
Link: https://patch.msgid.link/20251205231913.441872-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c0711f8c61 upstream.
Set all user-return MSRs to their post-TD-exit value when preparing to run
a TDX vCPU to ensure the value that KVM expects to be loaded after running
the vCPU is indeed the value that's loaded in hardware. If the TDX-Module
doesn't actually enter the guest, i.e. doesn't do VM-Enter, then it won't
"restore" VMM state, i.e. won't clobber user-return MSRs to their expected
post-run values, in which case simply updating KVM's "cached" value will
effectively corrupt the cache due to hardware still holding the original
value.
In theory, KVM could conditionally update the current user-return value if
and only if tdh_vp_enter() succeeds, but in practice "success" doesn't
guarantee the TDX-Module actually entered the guest, e.g. if the TDX-Module
synthesizes an EPT Violation because it suspects a zero-step attack.
Force-load the expected values instead of trying to decipher whether or
not the TDX-Module restored/clobbered MSRs, as the risk doesn't justify
the benefits. Effectively avoiding four WRMSRs once per run loop (even if
the vCPU is scheduled out, user-return MSRs only need to be reloaded if
the CPU exits to userspace or runs a non-TDX vCPU) is likely in the noise
when amortized over all entries, given the cost of running a TDX vCPU.
E.g. the cost of the WRMSRs is somewhere between ~300 and ~500 cycles,
whereas the cost of a _single_ roundtrip to/from a TDX guest is thousands
of cycles.
Fixes: e0b4f31a3c ("KVM: TDX: restore user ret MSRs")
Cc: stable@vger.kernel.org
Cc: Yan Zhao <yan.y.zhao@intel.com>
Cc: Xiaoyao Li <xiaoyao.li@intel.com>
Cc: Rick Edgecombe <rick.p.edgecombe@intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Link: https://patch.msgid.link/20251030191528.3380553-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 93c9e10738 upstream.
Mark the VMCB_PERM_MAP bit as dirty in nested_vmcb02_prepare_control()
on every nested VMRUN.
If L1 changes MSR interception (INTERCEPT_MSR_PROT) between two VMRUN
instructions on the same L1 vCPU, the msrpm_base_pa in the associated
vmcb02 will change, and the VMCB_PERM_MAP clean bit should be cleared.
Fixes: 4bb170a543 ("KVM: nSVM: do not mark all VMCB02 fields dirty on nested vmexit")
Reported-by: Matteo Rizzo <matteorizzo@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jim Mattson <jmattson@google.com>
Link: https://lore.kernel.org/r/20250922162935.621409-2-jmattson@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 32bd348be3 upstream.
In kvm_vcpu_on_spin(), the loop counter 'i' is incorrectly written to
last_boosted_vcpu instead of the actual vCPU index 'idx'. This causes
last_boosted_vcpu to store the loop iteration count rather than the
vCPU index, leading to incorrect round-robin behavior in subsequent
directed yield operations.
Fix this by using 'idx' instead of 'i' in the assignment.
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20251110033232.12538-7-kernellwp@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5674a76db0 upstream.
When emulating L2 instructions, svm_check_intercept() checks whether a
write to CR0 should trigger a synthesized #VMEXIT with
SVM_EXIT_CR0_SEL_WRITE. For MOV-to-CR0, SVM_EXIT_CR0_SEL_WRITE is only
triggered if any bit other than CR0.MP and CR0.TS is updated. However,
according to the APM (24593—Rev. 3.42—March 2024, Table 15-7):
The LMSW instruction treats the selective CR0-write
intercept as a non-selective intercept (i.e., it intercepts
regardless of the value being written).
Skip checking the changed bits for x86_intercept_lmsw and always inject
SVM_EXIT_CR0_SEL_WRITE.
Fixes: cfec82cb7d ("KVM: SVM: Add intercept check for emulated cr accesses")
Cc: stable@vger.kernel.org
Reported-by: Matteo Rizzo <matteorizzo@google.com>
Signed-off-by: Yosry Ahmed <yosry.ahmed@linux.dev>
Link: https://patch.msgid.link/20251024192918.3191141-3-yosry.ahmed@linux.dev
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7c8b465a1c upstream.
Mark the VMCB_NPT bit as dirty in nested_vmcb02_prepare_save()
on every nested VMRUN.
If L1 changes the PAT MSR between two VMRUN instructions on the same
L1 vCPU, the g_pat field in the associated vmcb02 will change, and the
VMCB_NPT clean bit should be cleared.
Fixes: 4bb170a543 ("KVM: nSVM: do not mark all VMCB02 fields dirty on nested vmexit")
Cc: stable@vger.kernel.org
Signed-off-by: Jim Mattson <jmattson@google.com>
Link: https://lore.kernel.org/r/20250922162935.621409-3-jmattson@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3d80f4c93d upstream.
When emulating L2 instructions, svm_check_intercept() checks whether a
write to CR0 should trigger a synthesized #VMEXIT with
SVM_EXIT_CR0_SEL_WRITE. However, it does not check whether L1 enabled
the intercept for SVM_EXIT_WRITE_CR0, which has higher priority
according to the APM (24593—Rev. 3.42—March 2024, Table 15-7):
When both selective and non-selective CR0-write intercepts are active at
the same time, the non-selective intercept takes priority. With respect
to exceptions, the priority of this intercept is the same as the generic
CR0-write intercept.
Make sure L1 does NOT intercept SVM_EXIT_WRITE_CR0 before checking if
SVM_EXIT_CR0_SEL_WRITE needs to be injected.
Opportunistically tweak the "not CR0" logic to explicitly bail early so
that it's more obvious that only CR0 has a selective intercept, and that
modifying icpt_info.exit_code is functionally necessary so that the call
to nested_svm_exit_handled() checks the correct exit code.
Fixes: cfec82cb7d ("KVM: SVM: Add intercept check for emulated cr accesses")
Cc: stable@vger.kernel.org
Signed-off-by: Yosry Ahmed <yosry.ahmed@linux.dev>
Link: https://patch.msgid.link/20251024192918.3191141-4-yosry.ahmed@linux.dev
[sean: isolate non-CR0 write logic, tweak comments accordingly]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 18ab3fc8e8 upstream.
When advancing the target expiration for the guest's APIC timer in periodic
mode, set the expiration to "now" if the target expiration is in the past
(similar to what is done in update_target_expiration()). Blindly adding
the period to the previous target expiration can result in KVM generating
a practically unbounded number of hrtimer IRQs due to programming an
expired timer over and over. In extreme scenarios, e.g. if userspace
pauses/suspends a VM for an extended duration, this can even cause hard
lockups in the host.
Currently, the bug only affects Intel CPUs when using the hypervisor timer
(HV timer), a.k.a. the VMX preemption timer. Unlike the software timer,
a.k.a. hrtimer, which KVM keeps running even on exits to userspace, the
HV timer only runs while the guest is active. As a result, if the vCPU
does not run for an extended duration, there will be a huge gap between
the target expiration and the current time the vCPU resumes running.
Because the target expiration is incremented by only one period on each
timer expiration, this leads to a series of timer expirations occurring
rapidly after the vCPU/VM resumes.
More critically, when the vCPU first triggers a periodic HV timer
expiration after resuming, advancing the expiration by only one period
will result in a target expiration in the past. As a result, the delta
may be calculated as a negative value. When the delta is converted into
an absolute value (tscdeadline is an unsigned u64), the resulting value
can overflow what the HV timer is capable of programming. I.e. the large
value will exceed the VMX Preemption Timer's maximum bit width of
cpu_preemption_timer_multi + 32, and thus cause KVM to switch from the
HV timer to the software timer (hrtimers).
After switching to the software timer, periodic timer expiration callbacks
may be executed consecutively within a single clock interrupt handler,
because hrtimers honors KVM's request for an expiration in the past and
immediately re-invokes KVM's callback after reprogramming. And because
the interrupt handler runs with IRQs disabled, restarting KVM's hrtimer
over and over until the target expiration is advanced to "now" can result
in a hard lockup.
E.g. the following hard lockup was triggered in the host when running a
Windows VM (only relevant because it used the APIC timer in periodic mode)
after resuming the VM from a long suspend (in the host).
NMI watchdog: Watchdog detected hard LOCKUP on cpu 45
...
RIP: 0010:advance_periodic_target_expiration+0x4d/0x80 [kvm]
...
RSP: 0018:ff4f88f5d98d8ef0 EFLAGS: 00000046
RAX: fff0103f91be678e RBX: fff0103f91be678e RCX: 00843a7d9e127bcc
RDX: 0000000000000002 RSI: 0052ca4003697505 RDI: ff440d5bfbdbd500
RBP: ff440d5956f99200 R08: ff2ff2a42deb6a84 R09: 000000000002a6c0
R10: 0122d794016332b3 R11: 0000000000000000 R12: ff440db1af39cfc0
R13: ff440db1af39cfc0 R14: ffffffffc0d4a560 R15: ff440db1af39d0f8
FS: 00007f04a6ffd700(0000) GS:ff440db1af380000(0000) knlGS:000000e38a3b8000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000d5651feff8 CR3: 000000684e038002 CR4: 0000000000773ee0
PKRU: 55555554
Call Trace:
<IRQ>
apic_timer_fn+0x31/0x50 [kvm]
__hrtimer_run_queues+0x100/0x280
hrtimer_interrupt+0x100/0x210
? ttwu_do_wakeup+0x19/0x160
smp_apic_timer_interrupt+0x6a/0x130
apic_timer_interrupt+0xf/0x20
</IRQ>
Moreover, if the suspend duration of the virtual machine is not long enough
to trigger a hard lockup in this scenario, since commit 98c25ead5e
("KVM: VMX: Move preemption timer <=> hrtimer dance to common x86"), KVM
will continue using the software timer until the guest reprograms the APIC
timer in some way. Since the periodic timer does not require frequent APIC
timer register programming, the guest may continue to use the software
timer in perpetuity.
Fixes: d8f2f498d9 ("x86/kvm: fix LAPIC timer drift when guest uses periodic mode")
Cc: stable@vger.kernel.org
Signed-off-by: fuqiang wang <fuqiang.wng@gmail.com>
[sean: massage comments and changelog]
Link: https://patch.msgid.link/20251113205114.1647493-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9633f180ce upstream.
When restarting an hrtimer to emulate a the guest's APIC timer in periodic
mode, explicitly set the expiration using the target expiration computed
by advance_periodic_target_expiration() instead of adding the period to
the existing timer. This will allow making adjustments to the expiration,
e.g. to deal with expirations far in the past, without having to implement
the same logic in both advance_periodic_target_expiration() and
apic_timer_fn().
Cc: stable@vger.kernel.org
Signed-off-by: fuqiang wang <fuqiang.wng@gmail.com>
[sean: split to separate patch, write changelog]
Link: https://patch.msgid.link/20251113205114.1647493-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0ea9494be9 upstream.
WARN and don't restart the hrtimer if KVM's callback runs with the guest's
APIC timer in periodic mode but with a period of '0', as not advancing the
hrtimer's deadline would put the CPU into an infinite loop of hrtimer
events. Observing a period of '0' should be impossible, even when the
hrtimer is running on a different CPU than the vCPU, as KVM is supposed to
cancel the hrtimer before changing (or zeroing) the period, e.g. when
switching from periodic to one-shot.
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20251113205114.1647493-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b94b735675 upstream.
Since Linux v6.7, booting using BootX on an Old World PowerMac produces
an early crash. Stan Johnson writes, "the symptoms are that the screen
goes blank and the backlight stays on, and the system freezes (Linux
doesn't boot)."
Further testing revealed that the failure can be avoided by disabling
CONFIG_BOOTX_TEXT. Bisection revealed that the regression was caused by
a change to the font bitmap pointer that's used when btext_init() begins
painting characters on the display, early in the boot process.
Christophe Leroy explains, "before kernel text is relocated to its final
location ... data is addressed with an offset which is added to the
Global Offset Table (GOT) entries at the start of bootx_init()
by function reloc_got2(). But the pointers that are located inside a
structure are not referenced in the GOT and are therefore not updated by
reloc_got2(). It is therefore needed to apply the offset manually by using
PTRRELOC() macro."
Cc: stable@vger.kernel.org
Link: https://lists.debian.org/debian-powerpc/2025/10/msg00111.html
Link: https://lore.kernel.org/linuxppc-dev/d81ddca8-c5ee-d583-d579-02b19ed95301@yahoo.com/
Reported-by: Cedar Maxwell <cedarmaxwell@mac.com>
Closes: https://lists.debian.org/debian-powerpc/2025/09/msg00031.html
Bisected-by: Stan Johnson <userm57@yahoo.com>
Tested-by: Stan Johnson <userm57@yahoo.com>
Fixes: 0ebc7feae7 ("powerpc: Use shared font data")
Suggested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Finn Thain <fthain@linux-m68k.org>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/22b3b247425a052b079ab84da926706b3702c2c7.1762731022.git.fthain@linux-m68k.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8c73851271 upstream.
If the osdmap is (maliciously) corrupted such that the encoded length
of ceph_pg_pool envelope is less than what is expected for a particular
encoding version, out-of-bounds reads may ensue because the only bounds
check that is there is based on that length value.
This patch adds explicit bounds checks for each field that is decoded
or skipped.
Cc: stable@vger.kernel.org
Reported-by: ziming zhang <ezrakiez@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Tested-by: ziming zhang <ezrakiez@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 43169328c7 upstream.
In chacha_zvkb, avoid using the s0 register, which is the frame pointer,
by reallocating KEY0 to t5. This makes stack traces available if e.g. a
crash happens in chacha_zvkb.
No frame pointer maintenance is otherwise required since this is a leaf
function.
Signed-off-by: Vivian Wang <wangruikang@iscas.ac.cn>
Fixes: bb54668837 ("crypto: riscv - add vector crypto accelerated ChaCha20")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20251202-riscv-chacha_zvkb-fp-v2-1-7bd00098c9dc@iscas.ac.cn
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ebbb90344a upstream.
In dm-pcache, in order to ensure crash-consistency, a dual-copy scheme
is used to alternately update metadata, and there is a slot index that
records the current slot. However, in the write path the current
implementation writes directly to the current slot indexed by slot
index, and then advances the slot — which ends up overwriting the
existing slot, violating the crash-consistency guarantee.
This patch fixes that behavior, preventing metadata from being
overwritten incorrectly.
In addition, this patch add a missing pmem_wmb() after memcpy_flushcache().
Signed-off-by: Dongsheng Yang <dongsheng.yang@linux.dev>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reviewed-by: Zheng Gu <cengku@gmail.com>
Cc: stable@vger.kernel.org # 6.18
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dca7da2443 upstream.
The ASP chip is a very old variant of the GSP chip and is used e.g. in
HP 730 workstations. When trying to reprogram the affinity it will crash
with a HPMC as the relevant registers don't seem to be at the usual
location. Let's avoid the crash by checking the sversion. Also note,
that reprogramming isn't necessary either, as the HP730 is a just a
single-CPU machine.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 08bd4c46d5 upstream.
__scs_magic() needs a 'void *' variable, but a 'struct task_struct *' is
given. 'task_scs(tsk)' is the starting address of the task's shadow call
stack, and '__scs_magic(task_scs(tsk))' is the end address of the task's
shadow call stack. Here should be '__scs_magic(task_scs(tsk))'.
The user-visible effect of this bug is that when CONFIG_DEBUG_STACK_USAGE
is enabled, the shadow call stack usage checking function
(scs_check_usage) would scan an incorrect memory range. This could lead
to:
1. **Inaccurate stack usage reporting**: The function would calculate
wrong usage statistics for the shadow call stack, potentially showing
incorrect value in kmsg.
2. **Potential kernel crash**: If the value of __scs_magic(tsk)is
greater than that of __scs_magic(task_scs(tsk)), the for loop may
access unmapped memory, potentially causing a kernel panic. However,
this scenario is unlikely because task_struct is allocated via the slab
allocator (which typically returns lower addresses), while the shadow
call stack returned by task_scs(tsk) is allocated via vmalloc(which
typically returns higher addresses).
However, since this is purely a debugging feature
(CONFIG_DEBUG_STACK_USAGE), normal production systems should be not
unaffected. The bug only impacts developers and testers who are actively
debugging stack usage with this configuration enabled.
Link: https://lkml.kernel.org/r/20251011082222.12965-1-zhichi.lin@vivo.com
Fixes: 5bbaf9d1fc ("scs: Add support for stack usage debugging")
Signed-off-by: Jiyuan Xie <xiejiyuan@vivo.com>
Signed-off-by: Zhichi Lin <zhichi.lin@vivo.com>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Acked-by: Will Deacon <will@kernel.org>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Marco Elver <elver@google.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yee Lee <yee.lee@mediatek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ad699fa78b upstream.
Add sanity check in iris_vb2_stop_streaming. If inst->state is
already IRIS_INST_ERROR, we should skip the stream_off operation
because it would still send packets to the firmware.
In iris_kill_session, inst->state is set to IRIS_INST_ERROR and
session_close is executed, which will kfree(inst_hfi_gen2->packet).
If stop_streaming is called afterward, it will cause a crash.
Fixes: 11712ce70f ("media: iris: implement vb2 streaming ops")
Cc: stable@vger.kernel.org
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Signed-off-by: Wangao Wang <wangao.wang@oss.qualcomm.com>
Reviewed-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com>
[bod: remove qcom from patch title]
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 944edca81e upstream.
After unbinding the driver, another kthread `cros_ec_console_log_work`
is still accessing the device, resulting an UAF and crash.
The driver doesn't unregister the EC device in .remove() which should
shutdown sub-devices synchronously. Fix it.
Fixes: 26a14267af ("platform/chrome: Add ChromeOS EC ISHTP driver")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20251031033900.3577394-1-tzungbi@kernel.org
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ab4e41eb9f upstream.
Fix an interaction between SMM and PV asynchronous #PFs where an #SMI can
cause KVM to drop an async #PF ready event, and thus result in guest tasks
becoming permanently stuck due to the task that encountered the #PF never
being resumed. Specifically, don't clear the completion queue when paging
is disabled, and re-check for completed async #PFs if/when paging is
enabled.
Prior to commit 2635b5c4a0 ("KVM: x86: interrupt based APF 'page ready'
event delivery"), flushing the APF queue without notifying the guest of
completed APF requests when paging is disabled was "necessary", in that
delivering a #PF to the guest when paging is disabled would likely confuse
and/or crash the guest. And presumably the original async #PF development
assumed that a guest would only disable paging when there was no intent to
ever re-enable paging.
That assumption fails in several scenarios, most visibly on an emulated
SMI, as entering SMM always disables CR0.PG (i.e. initially runs with
paging disabled). When the SMM handler eventually executes RSM, the
interrupted paging-enabled is restored, and the async #PF event is lost.
Similarly, invoking firmware, e.g. via EFI runtime calls, might require a
transition through paging modes and thus also disable paging with valid
entries in the competion queue.
To avoid dropping completion events, drop the "clear" entirely, and handle
paging-enable transitions in the same way KVM already handles APIC
enable/disable events: if a vCPU's APIC is disabled, APF completion events
are not kept pending and not injected while APIC is disabled. Once a
vCPU's APIC is re-enabled, KVM raises KVM_REQ_APF_READY so that the vCPU
recognizes any pending pending #APF ready events.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20251015033258.50974-4-mlevitsk@redhat.com
[sean: rework changelog to call out #PF injection, drop "real mode"
references, expand the code comment]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 039bef30e3 upstream.
syzbot reported a kernel BUG in ocfs2_find_victim_chain() because the
`cl_next_free_rec` field of the allocation chain list (next free slot in
the chain list) is 0, triggring the BUG_ON(!cl->cl_next_free_rec)
condition in ocfs2_find_victim_chain() and panicking the kernel.
To fix this, an if condition is introduced in ocfs2_claim_suballoc_bits(),
just before calling ocfs2_find_victim_chain(), the code block in it being
executed when either of the following conditions is true:
1. `cl_next_free_rec` is equal to 0, indicating that there are no free
chains in the allocation chain list
2. `cl_next_free_rec` is greater than `cl_count` (the total number of
chains in the allocation chain list)
Either of them being true is indicative of the fact that there are no
chains left for usage.
This is addressed using ocfs2_error(), which prints
the error log for debugging purposes, rather than panicking the kernel.
Link: https://lkml.kernel.org/r/20251201130711.143900-1-activprithvi@gmail.com
Signed-off-by: Prithvi Tambewagh <activprithvi@gmail.com>
Reported-by: syzbot+96d38c6e1655c1420a72@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=96d38c6e1655c1420a72
Tested-by: syzbot+96d38c6e1655c1420a72@syzkaller.appspotmail.com
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Jun Piao <piaojun@huawei.com>
Cc: Heming Zhao <heming.zhao@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 98aabfe2d7 upstream.
vidtv_channel_si_init() creates a temporary list (program, service, event)
and ownership of the memory itself is transferred to the PAT/SDT/EIT
tables through vidtv_psi_pat_program_assign(),
vidtv_psi_sdt_service_assign(), vidtv_psi_eit_event_assign().
The problem here is that the local pointer where the memory ownership
transfer was completed is not initialized to NULL. This causes the
vidtv_psi_pmt_create_sec_for_each_pat_entry() function to fail, and
in the flow that jumps to free_eit, the memory that was freed by
vidtv_psi_*_table_destroy() can be accessed again by
vidtv_psi_*_event_destroy() due to the uninitialized local pointer, so it
is freed once again.
Therefore, to prevent use-after-free and double-free vulnerability,
local pointers must be initialized to NULL when transferring memory
ownership.
Cc: <stable@vger.kernel.org>
Reported-by: syzbot+1d9c0edea5907af239e0@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=1d9c0edea5907af239e0
Fixes: 3be8037960 ("media: vidtv: add error checks")
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 53ca00a19d upstream.
When CONFIG_SLUB_TINY is enabled, kfree_nolock() calls kasan_slab_free()
before defer_free(). On ARM64 with MTE (Memory Tagging Extension),
kasan_slab_free() poisons the memory and changes the tag from the
original (e.g., 0xf3) to a poison tag (0xfe).
When defer_free() then tries to write to the freed object to build the
deferred free list via llist_add(), the pointer still has the old tag,
causing a tag mismatch and triggering a KASAN use-after-free report:
BUG: KASAN: slab-use-after-free in defer_free+0x3c/0xbc mm/slub.c:6537
Write at addr f3f000000854f020 by task kworker/u8:6/983
Pointer tag: [f3], memory tag: [fe]
Fix this by calling kasan_reset_tag() before accessing the freed memory.
This is safe because defer_free() is part of the allocator itself and is
expected to manipulate freed memory for bookkeeping purposes.
Fixes: af92793e52 ("slab: Introduce kmalloc_nolock() and kfree_nolock().")
Cc: stable@vger.kernel.org
Reported-by: syzbot+7a25305a76d872abcfa1@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=7a25305a76d872abcfa1
Tested-by: syzbot+7a25305a76d872abcfa1@syzkaller.appspotmail.com
Signed-off-by: Deepanshu Kartikey <kartikey406@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Link: https://patch.msgid.link/20251210022024.3255826-1-kartikey406@gmail.com
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9935df5333 upstream.
Reject attempts to disable KVM_MEM_GUEST_MEMFD on a memslot that was
initially created with a guest_memfd binding, as KVM doesn't support
toggling KVM_MEM_GUEST_MEMFD on existing memslots. KVM prevents enabling
KVM_MEM_GUEST_MEMFD, but doesn't prevent clearing the flag.
Failure to reject the new memslot results in a use-after-free due to KVM
not unbinding from the guest_memfd instance. Unbinding on a FLAGS_ONLY
change is easy enough, and can/will be done as a hardening measure (in
anticipation of KVM supporting dirty logging on guest_memfd at some point),
but fixing the use-after-free would only address the immediate symptom.
==================================================================
BUG: KASAN: slab-use-after-free in kvm_gmem_release+0x362/0x400 [kvm]
Write of size 8 at addr ffff8881111ae908 by task repro/745
CPU: 7 UID: 1000 PID: 745 Comm: repro Not tainted 6.18.0-rc6-115d5de2eef3-next-kasan #3 NONE
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
Call Trace:
<TASK>
dump_stack_lvl+0x51/0x60
print_report+0xcb/0x5c0
kasan_report+0xb4/0xe0
kvm_gmem_release+0x362/0x400 [kvm]
__fput+0x2fa/0x9d0
task_work_run+0x12c/0x200
do_exit+0x6ae/0x2100
do_group_exit+0xa8/0x230
__x64_sys_exit_group+0x3a/0x50
x64_sys_call+0x737/0x740
do_syscall_64+0x5b/0x900
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x7f581f2eac31
</TASK>
Allocated by task 745 on cpu 6 at 9.746971s:
kasan_save_stack+0x20/0x40
kasan_save_track+0x13/0x50
__kasan_kmalloc+0x77/0x90
kvm_set_memory_region.part.0+0x652/0x1110 [kvm]
kvm_vm_ioctl+0x14b0/0x3290 [kvm]
__x64_sys_ioctl+0x129/0x1a0
do_syscall_64+0x5b/0x900
entry_SYSCALL_64_after_hwframe+0x4b/0x53
Freed by task 745 on cpu 6 at 9.747467s:
kasan_save_stack+0x20/0x40
kasan_save_track+0x13/0x50
__kasan_save_free_info+0x37/0x50
__kasan_slab_free+0x3b/0x60
kfree+0xf5/0x440
kvm_set_memslot+0x3c2/0x1160 [kvm]
kvm_set_memory_region.part.0+0x86a/0x1110 [kvm]
kvm_vm_ioctl+0x14b0/0x3290 [kvm]
__x64_sys_ioctl+0x129/0x1a0
do_syscall_64+0x5b/0x900
entry_SYSCALL_64_after_hwframe+0x4b/0x53
Reported-by: Alexander Potapenko <glider@google.com>
Fixes: a7800aa80e ("KVM: Add KVM_CREATE_GUEST_MEMFD ioctl() for guest-specific backing memory")
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20251202020334.1171351-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 44bf66122c upstream.
Commit 1d2da79708 ("pinctrl: renesas: rzg2l: Avoid configuring ISEL in
gpio_irq_{en,dis}able*()") dropped the configuration of ISEL from
struct irq_chip::{irq_enable, irq_disable} APIs and moved it to
struct gpio_chip::irq::{child_to_parent_hwirq,
child_irq_domain_ops::free} APIs to fix spurious IRQs.
After commit 1d2da79708 ("pinctrl: renesas: rzg2l: Avoid configuring ISEL
in gpio_irq_{en,dis}able*()"), ISEL was no longer configured properly on
resume. This is because the pinctrl resume code used
struct irq_chip::irq_enable (called from rzg2l_gpio_irq_restore()) to
reconfigure the wakeup interrupts. Some drivers (e.g. Ethernet) may also
reconfigure non-wakeup interrupts on resume through their own code,
eventually calling struct irq_chip::irq_enable.
Fix this by adding ISEL configuration back into the
struct irq_chip::irq_enable API and on resume path for wakeup interrupts.
As struct irq_chip::irq_enable needs now to lock to update the ISEL,
convert the struct rzg2l_pinctrl::lock to a raw spinlock and replace the
locking API calls with the raw variants. Otherwise the lockdep reports
invalid wait context when probing the adv7511 module on RZ/G2L:
[ BUG: Invalid wait context ]
6.17.0-rc5-next-20250911-00001-gfcfac22533c9 #18 Not tainted
-----------------------------
(udev-worker)/165 is trying to lock:
ffff00000e3664a8 (&pctrl->lock){....}-{3:3}, at: rzg2l_gpio_irq_enable+0x38/0x78
other info that might help us debug this:
context-{5:5}
3 locks held by (udev-worker)/165:
#0: ffff00000e890108 (&dev->mutex){....}-{4:4}, at: __driver_attach+0x90/0x1ac
#1: ffff000011c07240 (request_class){+.+.}-{4:4}, at: __setup_irq+0xb4/0x6dc
#2: ffff000011c070c8 (lock_class){....}-{2:2}, at: __setup_irq+0xdc/0x6dc
stack backtrace:
CPU: 1 UID: 0 PID: 165 Comm: (udev-worker) Not tainted 6.17.0-rc5-next-20250911-00001-gfcfac22533c9 #18 PREEMPT
Hardware name: Renesas SMARC EVK based on r9a07g044l2 (DT)
Call trace:
show_stack+0x18/0x24 (C)
dump_stack_lvl+0x90/0xd0
dump_stack+0x18/0x24
__lock_acquire+0xa14/0x20b4
lock_acquire+0x1c8/0x354
_raw_spin_lock_irqsave+0x60/0x88
rzg2l_gpio_irq_enable+0x38/0x78
irq_enable+0x40/0x8c
__irq_startup+0x78/0xa4
irq_startup+0x108/0x16c
__setup_irq+0x3c0/0x6dc
request_threaded_irq+0xec/0x1ac
devm_request_threaded_irq+0x80/0x134
adv7511_probe+0x928/0x9a4 [adv7511]
i2c_device_probe+0x22c/0x3dc
really_probe+0xbc/0x2a0
__driver_probe_device+0x78/0x12c
driver_probe_device+0x40/0x164
__driver_attach+0x9c/0x1ac
bus_for_each_dev+0x74/0xd0
driver_attach+0x24/0x30
bus_add_driver+0xe4/0x208
driver_register+0x60/0x128
i2c_register_driver+0x48/0xd0
adv7511_init+0x5c/0x1000 [adv7511]
do_one_initcall+0x64/0x30c
do_init_module+0x58/0x23c
load_module+0x1bcc/0x1d40
init_module_from_file+0x88/0xc4
idempotent_init_module+0x188/0x27c
__arm64_sys_finit_module+0x68/0xac
invoke_syscall+0x48/0x110
el0_svc_common.constprop.0+0xc0/0xe0
do_el0_svc+0x1c/0x28
el0_svc+0x4c/0x160
el0t_64_sync_handler+0xa0/0xe4
el0t_64_sync+0x198/0x19c
Having ISEL configuration back into the struct irq_chip::irq_enable API
should be safe with respect to spurious IRQs, as in the probe case IRQs
are enabled anyway in struct gpio_chip::irq::child_to_parent_hwirq. No
spurious IRQs were detected on suspend/resume, boot, ethernet link
insert/remove tests (executed on RZ/G3S). Boot, ethernet link
insert/remove tests were also executed successfully on RZ/G2L.
Fixes: 1d2da79708 ("pinctrl: renesas: rzg2l: Avoid configuring ISEL in gpio_irq_{en,dis}able*(")
Cc: stable@vger.kernel.org
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20250912095308.3603704-1-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f59b701b46 upstream.
KASAN reports a global-out-of-bounds access when running these nfit
tests: clear.sh, pmem-errors.sh, pfn-meta-errors.sh, btt-errors.sh,
daxdev-errors.sh, and inject-error.sh.
[] BUG: KASAN: global-out-of-bounds in nfit_test_ctl+0x769f/0x7840 [nfit_test]
[] Read of size 4 at addr ffffffffc03ea01c by task ndctl/1215
[] The buggy address belongs to the variable:
[] handle+0x1c/0x1df4 [nfit_test]
nfit_test_search_spa() uses handle[nvdimm->id] to retrieve a device
handle and triggers a KASAN error when it reads past the end of the
handle array. It should not be indexing the handle array at all.
The correct device handle is stored in per-DIMM test data. Each DIMM
has a struct nfit_mem that embeds a struct acpi_nfit_memdev that
describes the NFIT device handle. Use that device handle here.
Fixes: 10246dc84d ("acpi nfit: nfit_test supports translate SPA")
Cc: stable@vger.kernel.org
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>> ---
Link: https://patch.msgid.link/20251031234227.1303113-1-alison.schofield@intel.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 01fba45dea upstream.
With below scripts, it will trigger panic in f2fs:
mkfs.f2fs -f /dev/vdd
mount /dev/vdd /mnt/f2fs
touch /mnt/f2fs/foo
sync
echo 111 >> /mnt/f2fs/foo
f2fs_io fsync /mnt/f2fs/foo
f2fs_io shutdown 2 /mnt/f2fs
umount /mnt/f2fs
mount -o ro,norecovery /dev/vdd /mnt/f2fs
or
mount -o ro,disable_roll_forward /dev/vdd /mnt/f2fs
F2FS-fs (vdd): f2fs_recover_fsync_data: recovery fsync data, check_only: 0
F2FS-fs (vdd): Mounted with checkpoint version = 7f5c361f
F2FS-fs (vdd): Stopped filesystem due to reason: 0
F2FS-fs (vdd): f2fs_recover_fsync_data: recovery fsync data, check_only: 1
Filesystem f2fs get_tree() didn't set fc->root, returned 1
------------[ cut here ]------------
kernel BUG at fs/super.c:1761!
Oops: invalid opcode: 0000 [#1] SMP PTI
CPU: 3 UID: 0 PID: 722 Comm: mount Not tainted 6.18.0-rc2+ #721 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
RIP: 0010:vfs_get_tree.cold+0x18/0x1a
Call Trace:
<TASK>
fc_mount+0x13/0xa0
path_mount+0x34e/0xc50
__x64_sys_mount+0x121/0x150
do_syscall_64+0x84/0x800
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7fa6cc126cfe
The root cause is we missed to handle error number returned from
f2fs_recover_fsync_data() when mounting image w/ ro,norecovery or
ro,disable_roll_forward mount option, result in returning a positive
error number to vfs_get_tree(), fix it.
Cc: stable@kernel.org
Fixes: 6781eabba1 ("f2fs: give -EINVAL for norecovery and rw mount")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 37345eae9d upstream.
w/ LFS mode, in get_left_section_blocks(), we should not account the
blocks which were used before and now are invalided, otherwise those
blocks will be counted as freed one in has_curseg_enough_space(), result
in missing to trigger GC in time.
Cc: stable@kernel.org
Fixes: 249ad438e1 ("f2fs: add a method for calculating the remaining blocks in the current segment in LFS mode.")
Fixes: bf34c93d26 ("f2fs: check curseg space before foreground GC")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 68d05693f8 upstream.
mkfs.f2fs -f /dev/vdd
mount /dev/vdd /mnt/f2fs
touch /mnt/f2fs/foo
sync # avoid CP_UMOUNT_FLAG in last f2fs_checkpoint.ckpt_flags
touch /mnt/f2fs/bar
f2fs_io fsync /mnt/f2fs/bar
f2fs_io shutdown 2 /mnt/f2fs
umount /mnt/f2fs
blockdev --setro /dev/vdd
mount /dev/vdd /mnt/f2fs
mount: /mnt/f2fs: WARNING: source write-protected, mounted read-only.
For the case if we create and fsync a new inode before sudden power-cut,
without norecovery or disable_roll_forward mount option, the following
mount will succeed w/o recovering last fsynced inode.
The problem here is that we only check inode_list list after
find_fsync_dnodes() in f2fs_recover_fsync_data() to find out whether
there is recoverable data in the iamge, but there is a missed case, if
last fsynced inode is not existing in last checkpoint, then, we will
fail to get its inode due to nat of inode node is not existing in last
checkpoint, so the inode won't be linked in inode_list.
Let's detect such case in dyrun mode to fix this issue.
After this change, mount will fail as expected below:
mount: /mnt/f2fs: cannot mount /dev/vdd read-only.
dmesg(1) may have more information after failed mount system call.
demsg:
F2FS-fs (vdd): Need to recover fsync data, but write access unavailable, please try mount w/ disable_roll_forward or norecovery
Cc: stable@kernel.org
Fixes: 6781eabba1 ("f2fs: give -EINVAL for norecovery and rw mount")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 392711ef18 upstream.
The one_time_gc field in struct victim_sel_policy is conditionally
initialized but unconditionally read, leading to undefined behavior
that triggers UBSAN warnings.
In f2fs_get_victim() at fs/f2fs/gc.c:774, the victim_sel_policy
structure is declared without initialization:
struct victim_sel_policy p;
The field p.one_time_gc is only assigned when the 'one_time' parameter
is true (line 789):
if (one_time) {
p.one_time_gc = one_time;
...
}
However, this field is unconditionally read in subsequent get_gc_cost()
at line 395:
if (p->one_time_gc && (valid_thresh_ratio < 100) && ...)
When one_time is false, p.one_time_gc contains uninitialized stack
memory. Hence p.one_time_gc is an invalid bool value.
UBSAN detects this invalid bool value:
UBSAN: invalid-load in fs/f2fs/gc.c:395:7
load of value 77 is not a valid value for type '_Bool'
CPU: 3 UID: 0 PID: 1297 Comm: f2fs_gc-252:16 Not tainted 6.18.0-rc3
#5 PREEMPT(voluntary)
Hardware name: OpenStack Foundation OpenStack Nova,
BIOS 1.13.0-1ubuntu1.1 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x70/0x90
dump_stack+0x14/0x20
__ubsan_handle_load_invalid_value+0xb3/0xf0
? dl_server_update+0x2e/0x40
? update_curr+0x147/0x170
f2fs_get_victim.cold+0x66/0x134 [f2fs]
? sched_balance_newidle+0x2ca/0x470
? finish_task_switch.isra.0+0x8d/0x2a0
f2fs_gc+0x2ba/0x8e0 [f2fs]
? _raw_spin_unlock_irqrestore+0x12/0x40
? __timer_delete_sync+0x80/0xe0
? timer_delete_sync+0x14/0x20
? schedule_timeout+0x82/0x100
gc_thread_func+0x38b/0x860 [f2fs]
? gc_thread_func+0x38b/0x860 [f2fs]
? __pfx_autoremove_wake_function+0x10/0x10
kthread+0x10b/0x220
? __pfx_gc_thread_func+0x10/0x10 [f2fs]
? _raw_spin_unlock_irq+0x12/0x40
? __pfx_kthread+0x10/0x10
ret_from_fork+0x11a/0x160
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
This issue is reliably reproducible with the following steps on a
100GB SSD /dev/vdb:
mkfs.f2fs -f /dev/vdb
mount /dev/vdb /mnt/f2fs_test
fio --name=gc --directory=/mnt/f2fs_test --rw=randwrite \
--bs=4k --size=8G --numjobs=12 --fsync=4 --runtime=10 \
--time_based
echo 1 > /sys/fs/f2fs/vdb/gc_urgent
The uninitialized value causes incorrect GC victim selection, leading
to unpredictable garbage collection behavior.
Fix by zero-initializing the entire victim_sel_policy structure to
ensure all fields have defined values.
Fixes: e791d00bd0 ("f2fs: add valid block ratio not to do excessive GC for one time GC")
Cc: stable@kernel.org
Signed-off-by: Xiaole He <hexiaole1994@126.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
