Having mixer control to switch between DMICs prevents user to
initiate capture simultaneously on both the DMIcs.
Earlier 2 separate devices, one for each DMIC, gave an option of
using them simultaneously, which is not supported.
Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com>
Link: https://lore.kernel.org/r/20200530095519.24324-1-akshu.agrawal@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add amp common init function to gather common init setting and finaize.
- add max98390_init_regs func
- move amp setting to max98390_init_regs func.
- removed unneceary setting and finalize common register values.
Signed-off-by: Steve Lee <steves.lee@maximintegrated.com>
Link: https://lore.kernel.org/r/20200611094718.18371-1-steves.lee@maximintegrated.com
Signed-off-by: Mark Brown <broonie@kernel.org>
pm_runtime_get_sync() increments the runtime PM usage counter even
when it returns an error code, causing incorrect ref count if
pm_runtime_put_noidle() is not called in error handling paths.
Thus call pm_runtime_put_noidle() if pm_runtime_get_sync() fails.
Signed-off-by: Qiushi Wu <wu000273@umn.edu>
Link: https://lore.kernel.org/r/20200614033344.1814-1-wu000273@umn.edu
Signed-off-by: Mark Brown <broonie@kernel.org>
pm_runtime_get_sync() increments the runtime PM usage counter even
when it returns an error code, causing incorrect ref count if
pm_runtime_put_noidle() is not called in error handling paths.
Thus call pm_runtime_put_noidle() if pm_runtime_get_sync() fails.
Signed-off-by: Qiushi Wu <wu000273@umn.edu>
Link: https://lore.kernel.org/r/20200614033749.2975-1-wu000273@umn.edu
Signed-off-by: Mark Brown <broonie@kernel.org>
Add two platform variables for headphone jack detection.
"hp_cfg" is for configuration of heaphone jack detection.
"gpio_cfg" is for configuration of gpio, the gpio is used
for plug & unplug interrupt on SoC.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1591180013-12416-2-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add two properties for headphone detection.
wlf,hp-cfg: A list of headphone jack detect configuration register values
wlf,gpio-cfg: A list of GPIO configuration register values
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1591180013-12416-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The audio system on S5PV210 Aries boards have a wm8994 codec connected
to the Samsung I2S0 DAI. Jack detection is done via GPIOs, an ADC, and
an extcon device (fsa9480).
There are two main variants, one with an FM radio and where the wm8994 is
the master for the modem audio and the other without FM and the modem is
the master.
Signed-off-by: Jonathan Bakker <xc-racer2@live.ca>
Link: https://lore.kernel.org/r/BN6PR04MB0660866A9B5FD4B9E74D7C31A39F0@BN6PR04MB0660.namprd04.prod.outlook.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Samsung Aries boards have a WM8994 codec connected to the Samsung
I2S controller, the BT codec, and the cellular modem. Jack detection
is done by a combination of an ADC, GPIOs, and an extcon device for
the USB dock. There is also a GPIO for selection between the Mic
path and the TV out path on the headphone jack.
There are two main variants, one with an FM radio and where the modem
is the master and one without a radio and the modem is the slave.
Signed-off-by: Jonathan Bakker <xc-racer2@live.ca>
Link: https://lore.kernel.org/r/BN6PR04MB06608CBF03EF27B70B175978A39F0@BN6PR04MB0660.namprd04.prod.outlook.com
Signed-off-by: Mark Brown <broonie@kernel.org>
kmemdup is introduced to duplicate a region of memory in a neat way.
Rather than kmalloc/kzalloc + memcpy, which the programmer needs to
write the size twice (sometimes lead to mistakes), kmemdup improves
readability, leads to smaller code and also reduce the chances of mistakes.
Suggestion to use kmemdup rather than using kmalloc/kzalloc + memcpy.
Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com>
Acked-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20190703163224.1029-1-huangfq.daxian@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch add missing company copyright
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87eeqvw8w8.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Now, soc_pcm_trigger_start/stop() are simple enough.
Let's merge these into soc_pcm_trigger().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87ftbbw8wj.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
soc-io.c has snd_soc_component_xxx() functions for I/O.
We have soc-componennt.c for it.
Let's merge soc-io.c into soc-component.c
By this patch, original soc-io.c functions start to use
soc_component_err() when error case.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87h7vrw8ws.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
we wantn't to directly access to component related parameter
as much as possible to keep encapsulation.
This patch adds snd_soc_component_init() for it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87img7w8x2.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We have 2 type of component functions
snd_soc_component_xxx() is focusing to component itself,
snd_soc_pcm_component_xxx() is focusing to rtd related component.
Now we can update snd_soc_component_trigger() to
snd_soc_pcm_component_trigger(). This patch do it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87k10nw8xf.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We have 2 type of component functions
snd_soc_component_xxx() is focusing to component itself,
snd_soc_pcm_component_xxx() is focusing to rtd related component.
Now we can update snd_soc_component_hw_free() to
snd_soc_pcm_component_hw_free(). This patch do it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87lfl3w8xv.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We have 2 type of component functions
snd_soc_component_xxx() is focusing to component itself,
snd_soc_pcm_component_xxx() is focusing to rtd related component.
Now we can update snd_soc_component_hw_params() to
snd_soc_pcm_component_hw_params(). This patch do it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87mu5jw8y8.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We have 2 type of component functions
snd_soc_component_xxx() is focusing to component itself,
snd_soc_pcm_component_xxx() is focusing to rtd related component.
Now we can update snd_soc_component_prepare() to
snd_soc_pcm_component_prepare(). This patch do it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87o8pzw8yl.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
At soc-component.c, it is good idea to indicate error function and
its component name if there was error.
This patch adds soc_component_err() for it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87pnafw8z2.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_component_xxx() should be implemented at soc-component.c
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87r1uvw8zb.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
soc-component is handling snd_soc_component_xxx().
Move snd_soc_component_xxx_regmap() to it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87sgfbw8zl.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
soc-component has too many snd_soc_component_xxx_pin_xxx() functions.
The difference between these functions are used function name and
enable/disable.
This patch adds common soc_component_pin() and share code.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87tuzrw8zw.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patchset fixes a memory allocation issue and removes a 100%
reproducible use-after-free report thrown by KASAN in automated module
removal tests across multiple platforms.
All the credit goes to Bard Liao for root-causing the issue. DAIs may
be registered at the same time as a component, or when the topology is
loaded. This two-step registration causes the memory for
topology-based DAIs to allocated last, and conversely to be released
first by devres, before the component is released and the DAIs removed
from the component DAI list with snd_soc_unregister_dais().
When we remove a component, by the time we walk through its dai list
to unregister all dais, the dais allocated by the topology have been
freed already by devres and the list is corrupted with pointers that
are no longer valid.
The suggestion is to add an explicit devm_ based registration for
topology-based dais, so that each dai is cleanly removed from the
component dai list in the release operation before devres releases the
allocated memory.
Pierre-Louis Bossart (2):
ASoC: soc-devres: add devm_snd_soc_register_dai()
ASoC: soc-topology: use devm_snd_soc_register_dai()
include/sound/soc.h | 4 ++++
sound/soc/soc-devres.c | 37 +++++++++++++++++++++++++++++++++++++
sound/soc/soc-topology.c | 3 +--
3 files changed, 42 insertions(+), 2 deletions(-)
--
2.20.1
Port commit 6d011d5057 ("ALSA: hda: Clear RIRB status before reading
WP") from legacy HDA driver to fix the get response timeout issue.
Current SOF driver does not suffer from this issue because sync write
is enabled in hda_init. The issue will come back if the sync write is
disabled for some reason.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/1591959048-15813-1-git-send-email-brent.lu@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently both FE and BE dai-links are configured bi-directional,
However the DSP BE dais are only single directional,
so set the directions as supported by the BE dais.
Fixes: c25e295cd7 (ASoC: qcom: Add support to parse common audio device nodes)
Reported-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: John Stultz <john.stultz@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20200612123711.29130-2-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds support to q6afe_is_rx_port() to get direction
of DSP BE dai port, this is useful for setting dailink
directions correctly.
Fixes: c25e295cd7 (ASoC: qcom: Add support to parse common audio device nodes)
Reported-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20200612123711.29130-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
soc_dpcm_fe_runtime_update() is called for all dailinks, and we want
to first discard all back-ends, then deal with front-ends.
The existing code first reports an error with multi-cpu front-ends,
and that check needs to be moved after we know that we are dealing
with a front-end.
Fixes: 6e1276a5e6 ('ASoC: Return error if the function does not support multi-cpu')
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
BugLink: https://github.com/thesofproject/linux/issues/1970
Link: https://lore.kernel.org/r/20200612203507.25621-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
According to ideal rt5682 CCF, the root clk is mclk.
But in some platforms, mclk is not exported to CCF.
In this condition, rt5682_register_dai_clks will not be called.
This patch lets dai clks could be registered whether mclk exists or not.
Signed-off-by: derek.fang <derek.fang@realtek.com>
Link: https://lore.kernel.org/r/1591938925-1070-5-git-send-email-derek.fang@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The registration of DAIs may be done at two distinct times, once
during a component registration and later when loading a
topology. Since devm_ managed resources are freed in the reverse order
they were allocated, when a component starts unregistering DAIs by
walking through the DAI list, the memory allocated for the
topology-registered DAIs was freed already, which leads to 100%
reproducible KASAN use-after-free reports.
This patch suggests a new devm_ function to force the DAI list to be
updated prior to freeing the memory chunks referenced by the list
pointers.
Suggested-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
BugLink: https://github.com/thesofproject/linux/issues/2186
Link: https://lore.kernel.org/r/20200612205938.26415-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
SafeSetID is capable of making allow/deny decisions for set*uid calls
on a system, and we want to add similar functionality for set*gid
calls. The work to do that is not yet complete, so probably won't make
it in for v5.8, but we are looking to get this simple patch in for
v5.8 since we have it ready. We are planning on the rest of the work
for extending the SafeSetID LSM being merged during the v5.9 merge
window.
This patch was sent to the security mailing list and there were no objections.
-----BEGIN PGP SIGNATURE-----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=I+0L
-----END PGP SIGNATURE-----
Merge tag 'LSM-add-setgid-hook-5.8-author-fix' of git://github.com/micah-morton/linux
Pull SafeSetID update from Micah Morton:
"Add additional LSM hooks for SafeSetID
SafeSetID is capable of making allow/deny decisions for set*uid calls
on a system, and we want to add similar functionality for set*gid
calls.
The work to do that is not yet complete, so probably won't make it in
for v5.8, but we are looking to get this simple patch in for v5.8
since we have it ready.
We are planning on the rest of the work for extending the SafeSetID
LSM being merged during the v5.9 merge window"
* tag 'LSM-add-setgid-hook-5.8-author-fix' of git://github.com/micah-morton/linux:
security: Add LSM hooks to set*gid syscalls
The SafeSetID LSM uses the security_task_fix_setuid hook to filter
set*uid() syscalls according to its configured security policy. In
preparation for adding analagous support in the LSM for set*gid()
syscalls, we add the requisite hook here. Tested by putting print
statements in the security_task_fix_setgid hook and seeing them get hit
during kernel boot.
Signed-off-by: Thomas Cedeno <thomascedeno@google.com>
Signed-off-by: Micah Morton <mortonm@chromium.org>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEE8rQSAMVO+zA4DBdWxWXV+ddtWDsFAl7lZwgACgkQxWXV+ddt
WDuj6g/9E2JtqeO8zRMLb+Do/n5YX0dFHt+dM1AGY+nw8hb3U9Vlgc8KJa7UpZFX
opl1i9QL+cJLoZMZL5xZhDouMQlum5cGVV3hLwqEPYetRF/ytw/kunWAg5o8OW1R
sJxGcjyiiKpZLVx6nMjGnYjsrbOJv0HlaWfY3NCon4oQ8yQTzTPMPBevPWRM7Iqw
Ssi8pA8zXCc2QoLgyk6Pe/IGeox8+z9RA2akHkJIdMWiPHm43RDF4Yx3Yl9NHHZA
M+pLVKjZoejqwVaai8osBqWVw4Ypax1+CJit6iHGwJDkQyFPcMXMsOc5ZYBnT5or
k/ceVMCs+ejvCK1+L30u7FQRiDqf5Fwhf/SGfq7+y83KbEjMfWOya3Lyk47fbDD4
776rSaS6ejqVklWppbaPhntSrBtPR1NaDOfi55bc9TOe+yW7Du+AsQMlEE0bTJaW
eHl+A4AP/nDlo8Etn1jTWd023bzzO+iySMn3YZfK0vw3vkj3JfrCGXx6DEYipOou
uEUj0jDo/rdiB5S3GdUCujjaPgm/f0wkPudTRB9lpxJas2qFU+qo2TLJhEleELwj
m4laz7W7S+nUFP0LRl8O82AzBfjm+oHjWTpfdloT6JW9Da8/iuZ/x9VBWQ8mFJwX
U0cR3zVqUuWcK78fZa/FFgGPBxlwUv2j+OhRGsS0/orDRlrwcXo=
=5S0s
-----END PGP SIGNATURE-----
Merge tag 'for-5.8-part2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"This reverts the direct io port to iomap infrastructure of btrfs
merged in the first pull request. We found problems in invalidate page
that don't seem to be fixable as regressions or without changing iomap
code that would not affect other filesystems.
There are four reverts in total, but three of them are followup
cleanups needed to revert a43a67a2d7 cleanly. The result is the
buffer head based implementation of direct io.
Reverts are not great, but under current circumstances I don't see
better options"
* tag 'for-5.8-part2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
Revert "btrfs: switch to iomap_dio_rw() for dio"
Revert "fs: remove dio_end_io()"
Revert "btrfs: remove BTRFS_INODE_READDIO_NEED_LOCK"
Revert "btrfs: split btrfs_direct_IO to read and write part"
Pull networking fixes from David Miller:
1) Fix cfg80211 deadlock, from Johannes Berg.
2) RXRPC fails to send norigications, from David Howells.
3) MPTCP RM_ADDR parsing has an off by one pointer error, fix from
Geliang Tang.
4) Fix crash when using MSG_PEEK with sockmap, from Anny Hu.
5) The ucc_geth driver needs __netdev_watchdog_up exported, from
Valentin Longchamp.
6) Fix hashtable memory leak in dccp, from Wang Hai.
7) Fix how nexthops are marked as FDB nexthops, from David Ahern.
8) Fix mptcp races between shutdown and recvmsg, from Paolo Abeni.
9) Fix crashes in tipc_disc_rcv(), from Tuong Lien.
10) Fix link speed reporting in iavf driver, from Brett Creeley.
11) When a channel is used for XSK and then reused again later for XSK,
we forget to clear out the relevant data structures in mlx5 which
causes all kinds of problems. Fix from Maxim Mikityanskiy.
12) Fix memory leak in genetlink, from Cong Wang.
13) Disallow sockmap attachments to UDP sockets, it simply won't work.
From Lorenz Bauer.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (83 commits)
net: ethernet: ti: ale: fix allmulti for nu type ale
net: ethernet: ti: am65-cpsw-nuss: fix ale parameters init
net: atm: Remove the error message according to the atomic context
bpf: Undo internal BPF_PROBE_MEM in BPF insns dump
libbpf: Support pre-initializing .bss global variables
tools/bpftool: Fix skeleton codegen
bpf: Fix memlock accounting for sock_hash
bpf: sockmap: Don't attach programs to UDP sockets
bpf: tcp: Recv() should return 0 when the peer socket is closed
ibmvnic: Flush existing work items before device removal
genetlink: clean up family attributes allocations
net: ipa: header pad field only valid for AP->modem endpoint
net: ipa: program upper nibbles of sequencer type
net: ipa: fix modem LAN RX endpoint id
net: ipa: program metadata mask differently
ionic: add pcie_print_link_status
rxrpc: Fix race between incoming ACK parser and retransmitter
net/mlx5: E-Switch, Fix some error pointer dereferences
net/mlx5: Don't fail driver on failure to create debugfs
net/mlx5e: CT: Fix ipv6 nat header rewrite actions
...
This reverts commit a43a67a2d7.
This patch reverts the main part of switching direct io implementation
to iomap infrastructure. There's a problem in invalidate page that
couldn't be solved as regression in this development cycle.
The problem occurs when buffered and direct io are mixed, and the ranges
overlap. Although this is not recommended, filesystems implement
measures or fallbacks to make it somehow work. In this case, fallback to
buffered IO would be an option for btrfs (this already happens when
direct io is done on compressed data), but the change would be needed in
the iomap code, bringing new semantics to other filesystems.
Another problem arises when again the buffered and direct ios are mixed,
invalidation fails, then -EIO is set on the mapping and fsync will fail,
though there's no real error.
There have been discussions how to fix that, but revert seems to be the
least intrusive option.
Link: https://lore.kernel.org/linux-btrfs/20200528192103.xm45qoxqmkw7i5yl@fiona/
Signed-off-by: David Sterba <dsterba@suse.com>
On AM65xx MCU CPSW2G NUSS and 66AK2E/L NUSS allmulti setting does not allow
unregistered mcast packets to pass.
This happens, because ALE VLAN entries on these SoCs do not contain port
masks for reg/unreg mcast packets, but instead store indexes of
ALE_VLAN_MASK_MUXx_REG registers which intended for store port masks for
reg/unreg mcast packets.
This path was missed by commit 9d1f644727 ("net: ethernet: ti: ale: fix
seeing unreg mcast packets with promisc and allmulti disabled").
Hence, fix it by taking into account ALE type in cpsw_ale_set_allmulti().
Fixes: 9d1f644727 ("net: ethernet: ti: ale: fix seeing unreg mcast packets with promisc and allmulti disabled")
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The ALE parameters structure is created on stack, so it has to be reset
before passing to cpsw_ale_create() to avoid garbage values.
Fixes: 93a7653031 ("net: ethernet: ti: introduce am65x/j721e gigabit eth subsystem driver")
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexei Starovoitov says:
====================
pull-request: bpf 2020-06-12
The following pull-request contains BPF updates for your *net* tree.
We've added 26 non-merge commits during the last 10 day(s) which contain
a total of 27 files changed, 348 insertions(+), 93 deletions(-).
The main changes are:
1) sock_hash accounting fix, from Andrey.
2) libbpf fix and probe_mem sanitizing, from Andrii.
3) sock_hash fixes, from Jakub.
4) devmap_val fix, from Jesper.
5) load_bytes_relative fix, from YiFei.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Looking into the context (atomic!) and the error message should be dropped.
Signed-off-by: Liao Pingfang <liao.pingfang@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----
iQGzBAABCgAdFiEE6fsu8pdIjtWE/DpLiiy9cAdyT1EFAl7kX6EACgkQiiy9cAdy
T1GdiQwAqMaDRVLZWeV5Uc0EM9AGkrWVu6F5n9nBzuKDTXCAf8aKCyiyYdMz/P20
belQA3bPG4jkLa/4Or1XfTY2OSSV4eGBlTfjHNeW2ZJ5pJWGInqCHuVco/M98om8
57JMTMZDTxN6884U+v3bBl4jDE6MqK3QS0WfA63ufd0T8ZnFOGDBn1DieJKbViyy
ZckpDH0etaAxO171SV5VwzbFe9U7OeTXupD8LYEHngR7vfaFCkX6ZftYYN0aWsvs
uL3p6K1kiNNxTXm0M3Hw6Gpk1nEAM9/6nOR6+TUppor+rQVJCH5F7NKQVrR92MDq
Qgwldt16DP1NjOb0q5L37HIg+9kD2kshKs9CErneen6eWtcfiN0HYT35hBxVi7RT
XT/dMt17wq3waoq92+RY3U4vb47QVWS6asH4/sqsTqUMWrlEYNGkEuCfeniZzJfO
bxglNPVafQ5qy2DWBzsAUX/isaR06FihEKqODK+K78KGTptim/+ip9+yXGjM6ne2
lhdWspC5
=Iwqj
-----END PGP SIGNATURE-----
Merge tag '5.8-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6
Pull more cifs updates from Steve French:
"12 cifs/smb3 fixes, 2 for stable.
- add support for idsfromsid on create and chgrp/chown allowing
ability to save owner information more naturally for some workloads
- improve query info (getattr) when SMB3.1.1 posix extensions are
negotiated by using new query info level"
* tag '5.8-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
smb3: Add debug message for new file creation with idsfromsid mount option
cifs: fix chown and chgrp when idsfromsid mount option enabled
smb3: allow uid and gid owners to be set on create with idsfromsid mount option
smb311: Add tracepoints for new compound posix query info
smb311: add support for using info level for posix extensions query
smb311: Add support for lookup with posix extensions query info
smb311: Add support for SMB311 query info (non-compounded)
SMB311: Add support for query info using posix extensions (level 100)
smb3: add indatalen that can be a non-zero value to calculation of credit charge in smb2 ioctl
smb3: fix typo in mount options displayed in /proc/mounts
cifs: Add get_security_type_str function to return sec type.
smb3: extend fscache mount volume coherency check
I'm not convinced the script makes useful automaed help lines anyway,
but since we're trying to deprecate the use of "---help---" in Kconfig
files, let's fix the doc example code too.
See commit a7f7f6248d ("treewide: replace '---help---' in Kconfig
files with 'help'")
Cc: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
