[ Upstream commit f65aa0ad79 ]
Memory access #VEs are hard for Linux to handle in contexts like the
entry code or NMIs. But other OSes need them for functionality.
There's a static (pre-guest-boot) way for a VMM to choose one or the
other. But VMMs don't always know which OS they are booting, so they
choose to deliver those #VEs so the "other" OSes will work. That,
unfortunately has left us in the lurch and exposed to these
hard-to-handle #VEs.
The TDX module has introduced a new feature. Even if the static
configuration is set to "send nasty #VEs", the kernel can dynamically
request that they be disabled. Once they are disabled, access to private
memory that is not in the Mapped state in the Secure-EPT (SEPT) will
result in an exit to the VMM rather than injecting a #VE.
Check if the feature is available and disable SEPT #VE if possible.
If the TD is allowed to disable/enable SEPT #VEs, the ATTR_SEPT_VE_DISABLE
attribute is no longer reliable. It reflects the initial state of the
control for the TD, but it will not be updated if someone (e.g. bootloader)
changes it before the kernel starts. Kernel must check TDCS_TD_CTLS bit to
determine if SEPT #VEs are enabled or disabled.
[ dhansen: remove 'return' at end of function ]
Fixes: 373e715e31 ("x86/tdx: Panic on bad configs that #VE on "private" memory access")
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/all/20241104103803.195705-4-kirill.shutemov%40linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5081e8fadb ]
The TDG_VM_WR TDCALL is used to ask the TDX module to change some
TD-specific VM configuration. There is currently only one user in the
kernel of this TDCALL leaf. More will be added shortly.
Refactor to make way for more users of TDG_VM_WR who will need to modify
other TD configuration values.
Add a wrapper for the TDG_VM_RD TDCALL that requests TD-specific
metadata from the TDX module. There are currently no users for
TDG_VM_RD. Mark it as __maybe_unused until the first user appears.
This is preparation for enumeration and enabling optional TD features.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: https://lore.kernel.org/all/20241104103803.195705-2-kirill.shutemov%40linux.intel.com
Stable-dep-of: f65aa0ad79 ("x86/tdx: Dynamically disable SEPT violations from causing #VEs")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4045de893f ]
In 2010, runtime power management support was implemented in the SCSI
core. The description of patch "[SCSI] implement runtime Power
Management" mentions that the sg driver is skipped but not why. This
patch enables runtime power management even if an instance of the sg
driver is held open. Enabling runtime PM for the sg driver is safe
because all interactions of the sg driver with the SCSI device pass
through the block layer (blk_execute_rq_nowait()) and the block layer
already supports runtime PM.
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Douglas Gilbert <dgilbert@interlog.com>
Fixes: bc4f24014d ("[SCSI] implement runtime Power Management")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20241030220310.1373569-1-bvanassche@acm.org
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 95bbdca499 ]
Hook "qedi_ops->common->sb_init = qed_sb_init" does not release the DMA
memory sb_virt when it fails. Add dma_free_coherent() to free it. This
is the same way as qedr_alloc_mem_sb() and qede_alloc_mem_sb().
Fixes: ace7f46ba5 ("scsi: qedi: Add QLogic FastLinQ offload iSCSI driver framework.")
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/r/20241026125711.484-3-thunder.leizhen@huawei.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c62c30429d ]
Hook "qed_ops->common->sb_init = qed_sb_init" does not release the DMA
memory sb_virt when it fails. Add dma_free_coherent() to free it. This
is the same way as qedr_alloc_mem_sb() and qede_alloc_mem_sb().
Fixes: 61d8658b4a ("scsi: qedf: Add QLogic FastLinQ offload FCoE driver framework.")
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/r/20241026125711.484-2-thunder.leizhen@huawei.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit da5aeca99d ]
In pr_err(), bdev_open_by_path() should be renamed to
bdev_file_open_by_path()
Fixes: 034f0cf8fd ("target: port block device access to file")
Signed-off-by: Baolin Liu <liubaolin@kylinos.cn>
Link: https://lore.kernel.org/r/20241030021800.234980-1-liubaolin12138@163.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 82e33f249f ]
Coccinelle complains about the nested reuse of the pointer `iter' with
different pointer type:
./fs/proc/kcore.c:515:26-30: ERROR: invalid reference to the index variable of the iterator on line 499
./fs/proc/kcore.c:534:23-27: ERROR: invalid reference to the index variable of the iterator on line 499
./fs/proc/kcore.c:550:40-44: ERROR: invalid reference to the index variable of the iterator on line 499
./fs/proc/kcore.c:568:27-31: ERROR: invalid reference to the index variable of the iterator on line 499
./fs/proc/kcore.c:581:28-32: ERROR: invalid reference to the index variable of the iterator on line 499
./fs/proc/kcore.c:599:27-31: ERROR: invalid reference to the index variable of the iterator on line 499
./fs/proc/kcore.c:607:38-42: ERROR: invalid reference to the index variable of the iterator on line 499
./fs/proc/kcore.c:614:26-30: ERROR: invalid reference to the index variable of the iterator on line 499
Replacing `struct kcore_list *iter' with `struct kcore_list *tmp' doesn't change the
scope and the functionality is the same and coccinelle seems happy.
NOTE: There was an issue with using `struct kcore_list *pos' as the nested iterator.
The build did not work!
[akpm@linux-foundation.org: s/tmp/pos/]
Link: https://lkml.kernel.org/r/20241029054651.86356-2-mtodorovac69@gmail.com
Link: https://lore.kernel.org/all/CAHk-=wgRr_D8CB-D9Kg-c=EHreAsk5SqXPwr9Y7k9sA6cWXJ6w@mail.gmail.com/ [1]
Link: https://lkml.kernel.org/r/20220331223700.902556-1-jakobkoschel@gmail.com
Fixes: 04d168c6d4 ("fs/proc/kcore.c: remove check of list iterator against head past the loop body")
Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com>
Signed-off-by: Mirsad Todorovac <mtodorovac69@gmail.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: "Brian Johannesmeyer" <bjohannesmeyer@gmail.com>
Cc: Cristiano Giuffrida <c.giuffrida@vu.nl>
Cc: "Bos, H.J." <h.j.bos@vu.nl>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Yang Li <yang.lee@linux.alibaba.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Yan Zhen <yanzhen@vivo.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 95c65546f0 ]
props.timing is not set after commit b5a8c50e5c ("leds: ktd2692: Convert
to use ExpressWire library"). Set it with ktd2692_timing.
Fixes: b5a8c50e5c ("leds: ktd2692: Convert to use ExpressWire library")
Signed-off-by: Raymond Hackley <raymondhackley@protonmail.com>
Acked-by: Duje Mihanović <duje.mihanovic@skole.hr>
Link: https://lore.kernel.org/r/20241103083505.49648-1-raymondhackley@protonmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 02f58f9741 ]
An object initialized via device_get_named_child_node() requires calls
to fwnode_handle_put() when it is no longer required to avoid leaking
memory.
Add the automatic cleanup facility for 'led_node' to ensure that
fwnode_handle_put() is called in all execution paths.
Fixes: 736214b4b0 ("leds: max5970: Add support for max5970")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20241031-max5970-of_node_put-v2-1-0ffe1f1d3bc9@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2f07b65238 ]
Do not require the presence of `$balanced_parens` to get the commit SHA;
this allows a `Fixes: deadbeef` tag to get a correct suggestion rather
than a suggestion containing a reference to HEAD.
Given this patch:
: From: Tamir Duberstein <tamird@gmail.com>
: Subject: Test patch
: Date: Fri, 25 Oct 2024 19:30:51 -0400
:
: This is a test patch.
:
: Fixes: bd17e036b4
: Signed-off-by: Tamir Duberstein <tamird@gmail.com>
: --- /dev/null
: +++ b/new-file
: @@ -0,0 +1 @@
: +Test.
Before:
WARNING: Please use correct Fixes: style 'Fixes: <12 chars of sha1> ("<title line>")' - ie: 'Fixes: c10a7d25e68f ("Test patch")'
After:
WARNING: Please use correct Fixes: style 'Fixes: <12 chars of sha1> ("<title line>")' - ie: 'Fixes: bd17e036b4 ("checkpatch: warn for non-standard fixes tag style")'
The prior behavior incorrectly suggested the patch's own SHA and title
line rather than the referenced commit's. This fixes that.
Ironically this:
Fixes: bd17e036b4 ("checkpatch: warn for non-standard fixes tag style")
Signed-off-by: Tamir Duberstein <tamird@gmail.com>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Dwaipayan Ray <dwaipayanray1@gmail.com>
Cc: Joe Perches <joe@perches.com>
Cc: Louis Peens <louis.peens@corigine.com>
Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Cc: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Cc: Philippe Schenker <philippe.schenker@toradex.com>
Cc: Simon Horman <horms@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f1645676f2 ]
There are some issues in pgtable_walk():
1. Super page is dumped as non-present page
2. dma_pte_superpage() should not check against leaf page table entries
3. Pointer pte is never NULL so checking it is meaningless
4. When an entry is not present, it still makes sense to dump the entry
content.
Fix 1,2 by checking dma_pte_superpage()'s returned value after level check.
Fix 3 by removing pte check.
Fix 4 by checking present bit after printing.
By this chance, change to print "page table not present" instead of "PTE
not present" to be clearer.
Fixes: 914ff7719e ("iommu/vt-d: Dump DMAR translation structure when DMA fault occurs")
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Link: https://lore.kernel.org/r/20241024092146.715063-3-zhenzhong.duan@intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6ceb93f952 ]
There are some issues in dmar_fault_dump_ptes():
1. return value of phys_to_virt() is used for checking if an entry is
present.
2. dump is confusing, e.g., "pasid table entry is not present", confusing
by unpresent pasid table vs. unpresent pasid table entry. Current code
means the former.
3. pgtable_walk() is called without checking if page table is present.
Fix 1 by checking present bit of an entry before dump a lower level entry.
Fix 2 by removing "entry" string, e.g., "pasid table is not present".
Fix 3 by checking page table present before walk.
Take issue 3 for example, before fix:
[ 442.240357] DMAR: pasid dir entry: 0x000000012c83e001
[ 442.246661] DMAR: pasid table entry[0]: 0x0000000000000000
[ 442.253429] DMAR: pasid table entry[1]: 0x0000000000000000
[ 442.260203] DMAR: pasid table entry[2]: 0x0000000000000000
[ 442.266969] DMAR: pasid table entry[3]: 0x0000000000000000
[ 442.273733] DMAR: pasid table entry[4]: 0x0000000000000000
[ 442.280479] DMAR: pasid table entry[5]: 0x0000000000000000
[ 442.287234] DMAR: pasid table entry[6]: 0x0000000000000000
[ 442.293989] DMAR: pasid table entry[7]: 0x0000000000000000
[ 442.300742] DMAR: PTE not present at level 2
After fix:
...
[ 357.241214] DMAR: pasid table entry[6]: 0x0000000000000000
[ 357.248022] DMAR: pasid table entry[7]: 0x0000000000000000
[ 357.254824] DMAR: scalable mode page table is not present
Fixes: 914ff7719e ("iommu/vt-d: Dump DMAR translation structure when DMA fault occurs")
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Link: https://lore.kernel.org/r/20241024092146.715063-2-zhenzhong.duan@intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 81a206d736 ]
If device_link_add() fails, it returns NULL pointer not ERR_PTR(),
replace IS_ERR() with NULL pointer check, and return -EINVAL.
Fixes: d3a0946d7a ("clk: imx: imx8: add audio clock mux driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20241026112452.1523-1-yangyingliang@huaweicloud.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e81361f6cf ]
The scu clk_ops only inplements prepare() and unprepare() callback.
Saving the clock state during suspend by checking clk_hw_is_enabled()
is not safe as it's possible that some device drivers may only
disable the clocks without unprepare. Then the state retention will not
work for such clocks.
Fixing it by checking clk_hw_is_prepared() which is more reasonable
and safe.
Fixes: d0409631f4 ("clk: imx: scu: add suspend/resume support")
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Tested-by: Carlos Song <carlos.song@nxp.com>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Link: https://lore.kernel.org/r/20241027-imx-clk-v1-v3-4-89152574d1d7@nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ff4279618f ]
To i.MX93 which features dual Cortex-A55 cores and DSU, when using
writel_relaxed to write value to PLL registers, the value might be
buffered. To make sure the value has been written into the hardware,
using readl to read back the register could achieve the goal.
current PLL power up flow can be simplified as below:
1. writel_relaxed to set the PLL POWERUP bit;
2. readl_poll_timeout to check the PLL lock bit:
a). timeout = ktime_add_us(ktime_get(), timeout_us);
b). readl the pll the lock reg;
c). check if the pll lock bit ready
d). check if timeout
But in some corner cases, both the write in step 1 and read in
step 2 will be blocked by other bus transaction in the SoC for a
long time, saying the value into real hardware is just before step b).
That means the timeout counting has begins for quite sometime since
step a), but value still not written into real hardware until bus
released just at a point before step b).
Then there maybe chances that the pll lock bit is not ready
when readl done but the timeout happens. readl_poll_timeout will
err return due to timeout. To avoid such unexpected failure,
read back the reg to make sure the write has been done in HW
reg.
So use readl after writel_relaxed to fix the issue.
Since we are here, to avoid udelay to run before writel_relaxed, use
readl before udelay.
Fixes: 1b26cb8a77 ("clk: imx: support fracn gppll")
Co-developed-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20241027-imx-clk-v1-v3-3-89152574d1d7@nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 557be501c3 ]
Per i.MX93 Reference Mannual 22.4 Initialization information
1. Program appropriate value of DIV[ODIV], DIV[RDIV] and DIV[MFI]
as per Integer mode.
2. Wait for 5 μs.
3. Program the following field in CTRL register.
Set CTRL[POWERUP] to 1'b1 to enable PLL block.
4. Poll PLL_STATUS[PLL_LOCK] register, and wait till PLL_STATUS[PLL_LOCK]
is 1'b1 and pll_lock output signal is 1'b1.
5. Set CTRL[CLKMUX_EN] to 1'b1 to enable PLL output clock.
So move the CLKMUX_EN operation after PLL locked.
Fixes: 1b26cb8a77 ("clk: imx: support fracn gppll")
Co-developed-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20241027-imx-clk-v1-v3-2-89152574d1d7@nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5ee063fac8 ]
Back-to-back LPCG writes can be ignored by the LPCG register due to
a HW bug. The writes need to be separated by at least 4 cycles of
the gated clock. See https://www.nxp.com.cn/docs/en/errata/IMX8_1N94W.pdf
The workaround is implemented as follows:
1. For clocks running greater than or equal to 24MHz, a read
followed by the write will provide sufficient delay.
2. For clocks running below 24MHz, add a delay of 4 clock cylces
after the write to the LPCG register.
Fixes: 2f77296d3d ("clk: imx: add lpcg clock support")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20241027-imx-clk-v1-v3-1-89152574d1d7@nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 332fa4a802 ]
In kvm_riscv_vcpu_sbi_init() the entry->ext_idx can contain an
out-of-bound index. This is used as a special marker for the base
extensions, that cannot be disabled. However, when traversing the
extensions, that special marker is not checked prior indexing the
array.
Add an out-of-bounds check to the function.
Fixes: 56d8a385b6 ("RISC-V: KVM: Allow some SBI extensions to be disabled by default")
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20241104191503.74725-1-bjorn@kernel.org
Signed-off-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 60821fb4dd ]
In the section "4.7 Precise effects on interrupt-pending bits"
of the RISC-V AIA specification defines that:
"If the source mode is Level1 or Level0 and the interrupt domain
is configured in MSI delivery mode (domaincfg.DM = 1):
The pending bit is cleared whenever the rectified input value is
low, when the interrupt is forwarded by MSI, or by a relevant
write to an in_clrip register or to clripnum."
Update the aplic_write_pending() to match the spec.
Fixes: d8dd9f113e ("RISC-V: KVM: Fix APLIC setipnum_le/be write emulation")
Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com>
Reviewed-by: Vincent Chen <vincent.chen@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20241029085542.30541-1-yongxuan.wang@sifive.com
Signed-off-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0bd2c61df9 ]
Fix a race condition when creating a lag bond in active backup
mode where after the bond creation the backup slave was
attached to the IB device, instead of the active slave.
This caused stale entries in the GID table, as the gid updating
mechanism relies on ib_device_get_netdev(), which would return
the backup slave.
Send an MLX5_DRIVER_EVENT_ACTIVE_BACKUP_LAG_CHANGE_LOWERSTATE
event when activating the lag, additionally to when modifying
the lag. This ensures that eventually the active netdevice is
stored in the bond IB device.
When handling this event remove the GIDs of the previously
attached netdevice in this port and rescan the GIDs of the
newly attached netdevice.
This ensures that eventually the active slave netdevice is
correctly stored in the IB device port. While there might be
a brief moment where the backup slave GIDs appear in the GID
table, it will eventually stabilize with the correct GIDs
(of the bond and the active slave).
Fixes: 8d159eb211 ("RDMA/mlx5: Use IB set_netdev and get_netdev functions")
Signed-off-by: Chiara Meiohas <cmeiohas@nvidia.com>
Link: https://patch.msgid.link/91fc2cb24f63add266a528c1c702668a80416d9f.1730381292.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit af7a35bf6c ]
rdma_roce_rescan_port() scans all network devices in
the system and adds the gids if relevant to the RoCE device
port. When not in bonding mode it adds the GIDs of the
netdevice in this port. When in bonding mode it adds the
GIDs of both the port's netdevice and the bond master
netdevice.
Export roce_del_all_netdev_gids(), which removes all GIDs
associated with a specific netdevice for a given port.
Signed-off-by: Chiara Meiohas <cmeiohas@nvidia.com>
Link: https://patch.msgid.link/674d498da4637a1503ff1367e28bd09ff942fd5e.1730381292.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Stable-dep-of: 0bd2c61df9 ("RDMA/mlx5: Ensure active slave attachment to the bond IB device")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 775e6d3c8f ]
Same with commit e375b9c929 ("RDMA/cxgb4: Set queue pair state when
being queried"). The API for ib_query_qp requires the driver to set
cur_qp_state on return, add the missing set.
Fixes: 8700e3e7c4 ("Soft RoCE driver")
Signed-off-by: Liu Jian <liujian56@huawei.com>
Link: https://patch.msgid.link/20241031092019.2138467-1-liujian56@huawei.com
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dabf72b85f ]
While computing foutpostdiv_rate, the value of params->pl5_fracin
is discarded, which results in the wrong refresh rate. Fix the formula
for computing foutpostdiv_rate.
Fixes: 1561380ee7 ("clk: renesas: rzg2l: Add FOUTPOSTDIV clk support")
Signed-off-by: Hien Huynh <hien.huynh.px@renesas.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20241024134236.315289-1-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e0f253a52c ]
To work around a limitation in our clock modelling, we try to force two
bits in the AUDIO0 PLL to 0, in the CCU probe routine.
However the ~ operator only applies to the first expression, and does
not cover the second bit, so we end up clearing only bit 1.
Group the bit-ORing with parentheses, to make it both clearer to read
and actually correct.
Fixes: 35b97bb941 ("clk: sunxi-ng: Add support for the D1 SoC clocks")
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Link: https://patch.msgid.link/20241001105016.1068558-1-andre.przywara@arm.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 808ca6de98 ]
Invalidate rkey is cpu endian and immediate data is in big endian format.
Both immediate data and invalidate the remote key returned by
HW is in little endian format.
While handling the commit in fixes tag, the difference between
immediate data and invalidate rkey endianness was not considered.
Without changes of this patch, Kernel ULP was failing while processing
inv_rkey.
dmesg log snippet -
nvme nvme0: Bogus remote invalidation for rkey 0x2000019Fix in this patch
Do endianness conversion based on completion queue entry flag.
Also, the HW completions are already converted to host endianness in
bnxt_qplib_cq_process_res_rc and bnxt_qplib_cq_process_res_ud and there
is no need to convert it again in bnxt_re_poll_cq. Modified the union to
hold the correct data type.
Fixes: 95b087f87b ("bnxt_re: Fix imm_data endianness")
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/1730110014-20755-1-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 323275ac2f ]
During reset, cmd to destroy resources such as qp, cq, and mr may fail,
and error logs will be printed. When a large number of resources are
destroyed, there will be lots of printings, and it may lead to a cpu
stuck.
Delete some unnecessary printings and replace other printing functions
in these paths with the ratelimited version.
Fixes: 9a4435375c ("IB/hns: Add driver files for hns RoCE driver")
Fixes: c7bcb13442 ("RDMA/hns: Add SRQ support for hip08 kernel mode")
Fixes: 70f9252158 ("RDMA/hns: Use the reserved loopback QPs to free MR before destroying MPT")
Fixes: 926a01dc00 ("RDMA/hns: Add QP operations support for hip08 SoC")
Signed-off-by: wenglianfa <wenglianfa@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20241024124000.2931869-6-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d81fb6511a ]
The hem code is executed before ib_dev is registered, so use dev_*
printing instead of ibdev_* to avoid log like this:
(null): set HEM address to HW failed!
Fixes: 2f49de21f3 ("RDMA/hns: Optimize mhop get flow for multi-hop addressing")
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20241024124000.2931869-5-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 370a9351bf ]
The sub-directory of hns_roce debugfs is named after the device's
kernel name currently, but it will be inconvenient to use when
the device is renamed.
Modify the name to pci name as users can always easily find the
correspondence between an RDMA device and its pci name.
Fixes: eb7854d63d ("RDMA/hns: Support SW stats with debugfs")
Signed-off-by: Yuyu Li <liyuyu6@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20241024124000.2931869-4-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 377a209770 ]
QP needs to be modified to IB_QPS_ERROR to trigger HW flush cqe. But
when this process races with destroy qp, the destroy-qp process may
modify the QP to IB_QPS_RESET first. In this case flush cqe will fail
since it is invalid to modify qp from IB_QPS_RESET to IB_QPS_ERROR.
Add lock and bit flag to make sure pending flush cqe work is completed
first and no more new works will be added.
Fixes: ffd541d457 ("RDMA/hns: Add the workqueue framework for flush cqe handler")
Signed-off-by: wenglianfa <wenglianfa@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20241024124000.2931869-3-huangjunxian6@hisilicon.com
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 571e4ab8a4 ]
eq_db_ci is updated only after all AEQEs are processed in the AEQ
interrupt handler, which is not timely enough and may result in
AEQ overflow. Two optimization methods are proposed:
1. Set an upper limit for AEQE processing.
2. Move time-consuming operations such as printings to the bottom
half of the interrupt.
cmd events and flush_cqe events are still fully processed in the top half
to ensure timely handling.
Fixes: a5073d6054 ("RDMA/hns: Add eq support of hip08")
Signed-off-by: wenglianfa <wenglianfa@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20241024124000.2931869-2-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1a1374bb8c ]
cpufreq_cpu_get_raw() may return NULL if the cpu is not in
policy->cpus cpu mask and it will cause null pointer dereference,
so check NULL for cppc_get_cpu_cost().
Fixes: 740fcdc2c2 ("cpufreq: CPPC: Register EM based on efficiency class information")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a78e720756 ]
cpufreq_cpu_get_raw() may return NULL if the cpu is not in
policy->cpus cpu mask and it will cause null pointer dereference.
Fixes: 740fcdc2c2 ("cpufreq: CPPC: Register EM based on efficiency class information")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b61c35e340 ]
In octal DTR mode, RD_ANY_REG_OP needs to use 4-byte address regardless
of flash's internal address mode. Use nor->addr_nbytes which is set to 4
during setup.
Fixes: eff9604390 ("mtd: spi-nor: spansion: add octal DTR support in RD_ANY_REG_OP")
Signed-off-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>
Link: https://lore.kernel.org/r/20241016000837.17951-1-Takahiro.Kuwano@infineon.com
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 00f8f70a0e ]
This was found by a static analyzer.
There may be a potential integer overflow issue in
sg2042_pll_recalc_rate(). numerator is defined as u64 while
parent_rate is defined as unsigned long and ctrl_table.fbdiv
is defined as unsigned int. On 32-bit machine, the result of
the calculation will be limited to "u32" without correct casting.
Integer overflow may occur on high-performance systems.
Fixes: 48cf7e0138 ("clk: sophgo: Add SG2042 clock driver")
Signed-off-by: Zichen Xie <zichenxie0106@gmail.com>
Reviewed-by: Chen Wang <unicorn_wang@outlook.com>
Link: https://lore.kernel.org/r/20241023145146.13130-1-zichenxie0106@gmail.com
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 06dbbb4d5f ]
copy_from_kernel_nofault() can be called when doing read of /proc/kcore.
/proc/kcore can have some unmapped kfence objects which when read via
copy_from_kernel_nofault() can cause page faults. Since *_nofault()
functions define their own fixup table for handling fault, use that
instead of asking kfence to handle such faults.
Hence we search the exception tables for the nip which generated the
fault. If there is an entry then we let the fixup table handler handle the
page fault by returning an error from within ___do_page_fault().
This can be easily triggered if someone tries to do dd from /proc/kcore.
eg. dd if=/proc/kcore of=/dev/null bs=1M
Some example false negatives:
===============================
BUG: KFENCE: invalid read in copy_from_kernel_nofault+0x9c/0x1a0
Invalid read at 0xc0000000fdff0000:
copy_from_kernel_nofault+0x9c/0x1a0
0xc00000000665f950
read_kcore_iter+0x57c/0xa04
proc_reg_read_iter+0xe4/0x16c
vfs_read+0x320/0x3ec
ksys_read+0x90/0x154
system_call_exception+0x120/0x310
system_call_vectored_common+0x15c/0x2ec
BUG: KFENCE: use-after-free read in copy_from_kernel_nofault+0x9c/0x1a0
Use-after-free read at 0xc0000000fe050000 (in kfence-#2):
copy_from_kernel_nofault+0x9c/0x1a0
0xc00000000665f950
read_kcore_iter+0x57c/0xa04
proc_reg_read_iter+0xe4/0x16c
vfs_read+0x320/0x3ec
ksys_read+0x90/0x154
system_call_exception+0x120/0x310
system_call_vectored_common+0x15c/0x2ec
Fixes: 90cbac0e99 ("powerpc: Enable KFENCE for PPC32")
Suggested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reported-by: Disha Goel <disgoel@linux.ibm.com>
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/a411788081d50e3b136c6270471e35aba3dfafa3.1729271995.git.ritesh.list@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 94e6fdd028 ]
Some configurations want to enable CONFIG_KUNIT without enabling
CONFIG_OF_OVERLAY. The kunit overlay code already skips if
CONFIG_OF_OVERLAY isn't enabled, so these selects here aren't really
doing anything besides making it easier to run the tests without them
skipping. Remove the select and move the config setting to the
drivers/clk/.kunitconfig file so that the clk tests can be run with or
without CONFIG_OF_OVERLAY set to test either behavior.
Fixes: 5776526beb ("clk: Add KUnit tests for clk fixed rate basic type")
Fixes: 274aff8711 ("clk: Add KUnit tests for clks registered with struct clk_parent_data")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20241016212738.897691-1-sboyd@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6d734f1bfc ]
The pmecc "user" structure is allocated in atmel_pmecc_create_user() and
was supposed to be freed with atmel_pmecc_destroy_user(), but this other
helper is never called. One solution would be to find the proper
location to call the destructor, but the trend today is to switch to
device managed allocations, which in this case fits pretty well.
Replace kzalloc() by devm_kzalloc() and drop the destructor entirely.
Reported-by: "Dr. David Alan Gilbert" <linux@treblig.org>
Closes: https://lore.kernel.org/all/ZvmIvRJCf6VhHvpo@gallifrey/
Fixes: f88fc122cc ("mtd: nand: Cleanup/rework the atmel_nand driver")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20241001203149.387655-1-miquel.raynal@bootlin.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 05b94cae1c ]
During early init CMA_MIN_ALIGNMENT_BYTES can be PAGE_SIZE,
since pageblock_order is still zero and it gets initialized
later during initmem_init() e.g.
setup_arch() -> initmem_init() -> sparse_init() -> set_pageblock_order()
One such use case where this causes issue is -
early_setup() -> early_init_devtree() -> fadump_reserve_mem() -> fadump_cma_init()
This causes CMA memory alignment check to be bypassed in
cma_init_reserved_mem(). Then later cma_activate_area() can hit
a VM_BUG_ON_PAGE(pfn & ((1 << order) - 1)) if the reserved memory
area was not pageblock_order aligned.
Fix it by moving the fadump_cma_init() after initmem_init(),
where other such cma reservations also gets called.
<stack trace>
==============
page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x10010
flags: 0x13ffff800000000(node=1|zone=0|lastcpupid=0x7ffff) CMA
raw: 013ffff800000000 5deadbeef0000100 5deadbeef0000122 0000000000000000
raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000
page dumped because: VM_BUG_ON_PAGE(pfn & ((1 << order) - 1))
------------[ cut here ]------------
kernel BUG at mm/page_alloc.c:778!
Call Trace:
__free_one_page+0x57c/0x7b0 (unreliable)
free_pcppages_bulk+0x1a8/0x2c8
free_unref_page_commit+0x3d4/0x4e4
free_unref_page+0x458/0x6d0
init_cma_reserved_pageblock+0x114/0x198
cma_init_reserved_areas+0x270/0x3e0
do_one_initcall+0x80/0x2f8
kernel_init_freeable+0x33c/0x530
kernel_init+0x34/0x26c
ret_from_kernel_user_thread+0x14/0x1c
Fixes: 11ac3e87ce ("mm: cma: use pageblock_order as the single alignment")
Suggested-by: David Hildenbrand <david@redhat.com>
Reported-by: Sachin P Bappalige <sachinpb@linux.ibm.com>
Acked-by: Hari Bathini <hbathini@linux.ibm.com>
Reviewed-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/3ae208e48c0d9cefe53d2dc4f593388067405b7d.1729146153.git.ritesh.list@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit adfaec30ff ]
We anyway don't use any return values from fadump_cma_init(). Since
fadump_reserve_mem() from where fadump_cma_init() gets called today,
already has the required checks.
This patch makes this function return type as void. Let's also handle
extra cases like return if fadump_supported is false or dump_active, so
that in later patches we can call fadump_cma_init() separately from
setup_arch().
Acked-by: Hari Bathini <hbathini@linux.ibm.com>
Reviewed-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/a2afc3d6481a87a305e89cfc4a3f3d2a0b8ceab3.1729146153.git.ritesh.list@gmail.com
Stable-dep-of: 05b94cae1c ("powerpc/fadump: Move fadump_cma_init to setup_arch() after initmem_init()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
