Commit graph

546,446 commits

Author SHA1 Message Date
Jacob Keller
c583cc430c i40e: only report generic filters in get_ts_info
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Tested-by: Jim Young <james.m.young@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-07-17 19:59:05 -07:00
Jacob Keller
dd3950c6d7 bnx2x: only report most generic filters in get_ts_info
CC: Ariel Elior <ariel.elior@qlogic.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-07-17 19:59:05 -07:00
Jacob Keller
1c3b8c2fe7 freescale: remove incorrect copied comment
The comment in question is word-for-word copied from ixgbe, and clearly
has no meaning in freescale's driver. (it even says 'return an error'
when the code clearly does not). Remove the comment as it is obviously
incorrect and not applicable to the code as it is today.

CC: Pantelis Antoniou <pantelis.antoniou@gmail.com>
CC: Vitaly Bordug <vbordug@ru.mvista.com>
CC: <linuxppc-dev@lists.ozlabs.org>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-07-17 19:59:05 -07:00
Jacob Keller
eff3cddc22 clarify implementation of ethtool's get_ts_info op
This patch adds some clarification about the intended way to implement
both SIOCSHWTSTAMP and ethtool's get_ts_info. The HWTSTAMP API has
several Rx filters which are very specific, as well as more general
filters. The specific filters really only exist to support some broken
hardware which can't fully implement the generic filters. This patch
adds clarification that it is okay to support the specific filters in
SIOCSHWTSTAMP by upscaling them to the generic filters. In addition,
update the header for ethtool_ts_info to specify that drivers ought to
only report the filters they support without upscaling in this manner.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Reviewed-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-07-17 19:59:04 -07:00
Shawn Guo
def56bba7a input: snvs_pwrkey: use "wakeup-source" as deivce tree property name
Instead of inventing a new property name, let's use "wakeup-source" to
be consistent with other driver and subsystem bindings.

Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-07-18 09:45:43 +08:00
Ingo Molnar
5aaeb5c01c x86/fpu, sched: Introduce CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT and use it on x86
Don't burden architectures without dynamic task_struct sizing
with the overhead of dynamic sizing.

Also optimize the x86 code a bit by caching task_struct_size.

Acked-and-Tested-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave@sr71.net>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1437128892-9831-3-git-send-email-mingo@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-07-18 03:42:51 +02:00
Dave Hansen
0c8c0f03e3 x86/fpu, sched: Dynamically allocate 'struct fpu'
The FPU rewrite removed the dynamic allocations of 'struct fpu'.
But, this potentially wastes massive amounts of memory (2k per
task on systems that do not have AVX-512 for instance).

Instead of having a separate slab, this patch just appends the
space that we need to the 'task_struct' which we dynamically
allocate already.  This saves from doing an extra slab
allocation at fork().

The only real downside here is that we have to stick everything
and the end of the task_struct.  But, I think the
BUILD_BUG_ON()s I stuck in there should keep that from being too
fragile.

Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave@sr71.net>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1437128892-9831-2-git-send-email-mingo@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-07-18 03:42:35 +02:00
Krzysztof Kozlowski
800e3b9a68 Input: drop owner assignment from i2c_driver
i2c_driver does not need to set an owner because i2c_register_driver()
will set it.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-07-17 16:57:00 -07:00
Aneesh Kumar K.V
5a09e6ce90 lib/decompress: set the compressor name to NULL on error
Without this we end up using the previous name of the compressor in the
loop in unpack_rootfs.  For example we get errors like "compression
method gzip not configured" even when we have CONFIG_DECOMPRESS_GZIP
enabled.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-07-17 16:39:54 -07:00
Joonsoo Kim
d56e84b406 mm/cma_debug: correct size input to bitmap function
In CMA, 1 bit in bitmap means 1 << order_per_bits pages so size of
bitmap is cma->count >> order_per_bits rather than just cma->count.
This patch fixes it.

Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Stefan Strogin <stefan.strogin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-07-17 16:39:54 -07:00
Joonsoo Kim
2292c0b1c4 mm/cma_debug: fix debugging alloc/free interface
CMA has alloc/free interface for debugging.  It is intended that
alloc/free occurs in specific CMA region, but, currently, alloc/free
interface is on root dir due to the bug so we can't select CMA region
where alloc/free happens.

This patch fixes this problem by making alloc/free interface per CMA
region.

Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Stefan Strogin <stefan.strogin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-07-17 16:39:54 -07:00
Joonsoo Kim
e2cfc91120 mm/page_owner: set correct gfp_mask on page_owner
Currently, we set wrong gfp_mask to page_owner info in case of isolated
freepage by compaction and split page.  It causes incorrect mixed
pageblock report that we can get from '/proc/pagetypeinfo'.  This metric
is really useful to measure fragmentation effect so should be accurate.
This patch fixes it by setting correct information.

Without this patch, after kernel build workload is finished, number of
mixed pageblock is 112 among roughly 210 movable pageblocks.

But, with this fix, output shows that mixed pageblock is just 57.

Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-07-17 16:39:54 -07:00
Joonsoo Kim
f3a14ced32 mm/page_owner: fix possible access violation
When I tested my new patches, I found that page pointer which is used
for setting page_owner information is changed.  This is because page
pointer is used to set new migratetype in loop.  After this work, page
pointer could be out of bound.  If this wrong pointer is used for
page_owner, access violation happens.  Below is error message that I
got.

  BUG: unable to handle kernel paging request at 0000000000b00018
  IP: [<ffffffff81025f30>] save_stack_address+0x30/0x40
  PGD 1af2d067 PUD 166e0067 PMD 0
  Oops: 0002 [#1] SMP
  ...snip...
  Call Trace:
    print_context_stack+0xcf/0x100
    dump_trace+0x15f/0x320
    save_stack_trace+0x2f/0x50
    __set_page_owner+0x46/0x70
    __isolate_free_page+0x1f7/0x210
    split_free_page+0x21/0xb0
    isolate_freepages_block+0x1e2/0x410
    compaction_alloc+0x22d/0x2d0
    migrate_pages+0x289/0x8b0
    compact_zone+0x409/0x880
    compact_zone_order+0x6d/0x90
    try_to_compact_pages+0x110/0x210
    __alloc_pages_direct_compact+0x3d/0xe6
    __alloc_pages_nodemask+0x6cd/0x9a0
    alloc_pages_current+0x91/0x100
    runtest_store+0x296/0xa50
    simple_attr_write+0xbd/0xe0
    __vfs_write+0x28/0xf0
    vfs_write+0xa9/0x1b0
    SyS_write+0x46/0xb0
    system_call_fastpath+0x16/0x75

This patch fixes this error by moving up set_page_owner().

Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-07-17 16:39:54 -07:00
Jan Kara
a2673b6e04 fsnotify: fix oops in fsnotify_clear_marks_by_group_flags()
fsnotify_clear_marks_by_group_flags() can race with
fsnotify_destroy_marks() so when fsnotify_destroy_mark_locked() drops
mark_mutex, a mark from the list iterated by
fsnotify_clear_marks_by_group_flags() can be freed and we dereference free
memory in the loop there.

Fix the problem by keeping mark_mutex held in
fsnotify_destroy_mark_locked().  The reason why we drop that mutex is that
we need to call a ->freeing_mark() callback which may acquire mark_mutex
again.  To avoid this and similar lock inversion issues, we move the call
to ->freeing_mark() callback to the kthread destroying the mark.

Signed-off-by: Jan Kara <jack@suse.cz>
Reported-by: Ashish Sangwan <a.sangwan@samsung.com>
Suggested-by: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-07-17 16:39:54 -07:00
Alexey Dobriyan
3581d458c3 /proc/$PID/cmdline: fixup empty ARGV case
/proc/*/cmdline code checks if it should look at ENVP area by checking
last byte of ARGV area:

	rv = access_remote_vm(mm, arg_end - 1, &c, 1, 0);
	if (rv <= 0)
		goto out_free_page;

If ARGV is somehow made empty (by doing execve(..., NULL, ...) or
manually setting ->arg_start and ->arg_end to equal values), the decision
will be based on byte which doesn't even belong to ARGV/ENVP.

So, quickly check if ARGV area is empty and report 0 to match previous
behaviour.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-07-17 16:39:54 -07:00
Haggai Eran
c9d120b0b2 dma-debug: skip debug_dma_assert_idle() when disabled
If dma-debug is disabled due to a memory error, DMA unmaps do not affect
the dma_active_cacheline radix tree anymore, and debug_dma_assert_idle()
can print false warnings.

Disable debug_dma_assert_idle() when dma_debug_disabled() is true.

Signed-off-by: Haggai Eran <haggaie@mellanox.com>
Fixes: 0abdd7a81b ("dma-debug: introduce debug_dma_assert_idle()")
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Vinod Koul <vinod.koul@intel.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: James Bottomley <JBottomley@Parallels.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Sebastian Ott <sebott@linux.vnet.ibm.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Horia Geanta <horia.geanta@freescale.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-07-17 16:39:53 -07:00
Horacio Mijail Anton Quiles
0f70fe605f hexdump: fix for non-aligned buffers
A hexdump with a buf not aligned to the groupsize causes
non-naturally-aligned memory accesses.  This was causing a kernel panic
on the processor BlackFin BF527, when such an unaligned buffer was fed
by the function ubifs_scanned_corruption in fs/ubifs/scan.c .

To fix this, change accesses to the contents of the buffer so they go
through get_unaligned().  This change should be harmless to unaligned-
access-capable architectures, and any performance hit should be anyway
dwarfed by the snprintf() processing time.

Signed-off-by: Horacio Mijail Antón Quiles <hmijail@gmail.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Joe Perches <joe@perches.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-07-17 16:39:53 -07:00
Joe Perches
b4749e96a4 checkpatch: fix long line messages about patch context
Changes in ("checkpatch: categorize some long line length checks")
now erroneously reports long line defects in patch context.

Fix it.

Signed-off-by: Joe Perches <joe@perches.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-07-17 16:39:53 -07:00
Laurent Dufour
f2abeef9fd mm: clean up per architecture MM hook header files
Commit 2ae416b142 ("mm: new mm hook framework") introduced an empty
header file (mm-arch-hooks.h) for every architecture, even those which
doesn't need to define mm hooks.

As suggested by Geert Uytterhoeven, this could be cleaned through the use
of a generic header file included via each per architecture
asm/include/Kbuild file.

The PowerPC architecture is not impacted here since this architecture has
to defined the arch_remap MM hook.

Signed-off-by: Laurent Dufour <ldufour@linux.vnet.ibm.com>
Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Vineet Gupta <vgupta@synopsys.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-07-17 16:39:53 -07:00
Geert Uytterhoeven
b992c7689a MAINTAINERS: uclinux-h8-devel is moderated for non-subscribers
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-07-17 16:39:53 -07:00
Sudeep Holla
5248e3a9b4 mailmap: update Sudeep Holla's email id
Since the get_maintainer script still reports my old email id based on
few old commits, update mailmap to report new/updated address.  It also
helps to fix email address for 'git shortlog'

Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-07-17 16:39:53 -07:00
Viresh Kumar
da89947b47 Update Viresh Kumar's email address
Switch to my kernel.org alias instead of a badly named gmail address,
which I rarely use.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-07-17 16:39:53 -07:00
Mel Gorman
ae026b2aa1 mm, meminit: suppress unused memory variable warning
The kbuild test robot reported the following

  tree:   git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git master
  head:   14a6f1989d
  commit: 3b242c66cc x86: mm: enable deferred struct page initialisation on x86-64
  date:   3 days ago
  config: x86_64-randconfig-x006-201527 (attached as .config)
  reproduce:
    git checkout 3b242c66cc
    # save the attached .config to linux build tree
    make ARCH=x86_64

  All warnings (new ones prefixed by >>):

     mm/page_alloc.c: In function 'early_page_uninitialised':
  >> mm/page_alloc.c:247:6: warning: unused variable 'nid' [-Wunused-variable]
       int nid = early_pfn_to_nid(pfn);

It's due to the NODE_DATA macro ignoring the nid parameter on !NUMA
configurations.  This patch avoids the warning by not declaring nid.

Signed-off-by: Mel Gorman <mgorman@suse.de>
Reported-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-07-17 16:39:53 -07:00
Nicolas Iooss
3958b79266 configfs: fix kernel infoleak through user-controlled format string
Some modules call config_item_init_type_name() and config_group_init_type_name()
with parameter "name" directly controlled by userspace.  These two
functions call config_item_set_name() with this name used as a format
string, which can be used to leak information such as content of the
stack to userspace.

For example, make_netconsole_target() in netconsole module calls
config_item_init_type_name() with the name of a newly-created directory.
This means that the following commands give some unexpected output, with
configfs mounted in /sys/kernel/config/ and on a system with a
configured eth0 ethernet interface:

    # modprobe netconsole
    # mkdir /sys/kernel/config/netconsole/target_%lx
    # echo eth0 > /sys/kernel/config/netconsole/target_%lx/dev_name
    # echo 1 > /sys/kernel/config/netconsole/target_%lx/enabled
    # echo eth0 > /sys/kernel/config/netconsole/target_%lx/dev_name
    # dmesg |tail -n1
    [  142.697668] netconsole: target (target_ffffffffc0ae8080) is
    enabled, disable to update parameters

The directory name is correct but %lx has been interpreted in the
internal item name, displayed here in the error message used by
store_dev_name() in drivers/net/netconsole.c.

To fix this, update every caller of config_item_set_name to use "%s"
when operating on untrusted input.

This issue was found using -Wformat-security gcc flag, once a __printf
attribute has been added to config_item_set_name().

Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Felipe Balbi <balbi@ti.com>
Acked-by: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-07-17 16:39:53 -07:00
Nicolas Iooss
8db1486065 include, lib: add __printf attributes to several function prototypes
Using __printf attributes helps to detect several format string issues
at compile time (even though -Wformat-security is currently disabled in
Makefile).  For example it can detect when formatting a pointer as a
number, like the issue fixed in commit a3fa71c40f ("wl18xx: show
rx_frames_per_rates as an array as it really is"), or when the arguments
do not match the format string, c.f.  for example commit 5ce1aca814
("reiserfs: fix __RASSERT format string").

To prevent similar bugs in the future, add a __printf attribute to every
function prototype which needs one in include/linux/ and lib/.  These
functions were mostly found by using gcc's -Wsuggest-attribute=format
flag.

Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Felipe Balbi <balbi@ti.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-07-17 16:39:53 -07:00
Dominik Dingel
7f9be77555 s390/hugetlb: add hugepages_supported define
On s390 we only can enable hugepages if the underlying hardware/hypervisor
also does support this.  Common code now would assume this to be
signaled by setting HPAGE_SHIFT to 0.  But on s390, where we only
support one hugepage size, there is a link between HPAGE_SHIFT and
pageblock_order.

So instead of setting HPAGE_SHIFT to 0, we will implement the check for
the hardware capability.

Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-07-17 16:39:52 -07:00
Dominik Dingel
2531c8cf56 mm: hugetlb: allow hugepages_supported to be architecture specific
s390 has a constant hugepage size, by setting HPAGE_SHIFT we also change
e.g. the pageblock_order, which should be independent in respect to
hugepage support.

With this patch every architecture is free to define how to check
for hugepage support.

Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-07-17 16:39:52 -07:00
Dominik Dingel
41318bfe2a revert "s390/mm: make hugepages_supported a boot time decision"
Heiko noticed that the current check for hugepage support on s390 is a
little bit too harsh as systems which do not support will crash.

The reason is that pageblock_order can now get negative when we set
HPAGE_SHIFT to 0.  To avoid all this and to avoid opening another can of
worms with enabling HUGETLB_PAGE_SIZE_VARIABLE I think it would be best
to simply allow architectures to define their own hugepages_supported().

Revert bea41197ea ("s390/mm: make hugepages_supported a boot time
decision") in preparation.

Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-07-17 16:39:52 -07:00
Dominik Dingel
ad4f99e888 revert "s390/mm: change HPAGE_SHIFT type to int"
Heiko noticed that the current check for hugepage support on s390 is a
little bit too harsh as systems which do not support will crash.

The reason is that pageblock_order can now get negative when we set
HPAGE_SHIFT to 0.  To avoid all this and to avoid opening another can of
worms with enabling HUGETLB_PAGE_SIZE_VARIABLE I think it would be best
to simply allow architectures to define their own hugepages_supported().

This patch (of 4): revert commit cf54e2fce5 ("s390/mm: change
HPAGE_SHIFT type to int") in preparation.

Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-07-17 16:39:52 -07:00
Andrew Morton
04ea1e91f8 openrisc: fix CONFIG_UID16 setting
openrisc-allnoconfig:

  kernel/uid16.c: In function 'SYSC_setgroups16':
  kernel/uid16.c:184:2: error: implicit declaration of function 'groups_alloc'
  kernel/uid16.c:184:13: warning: assignment makes pointer from integer without a cast

openrisc shouldn't be setting CONFIG_UID16 when CONFIG_MULTIUSER=n.

Fixes: 2813893f8b ("kernel: conditionally support non-root users, groups and capabilities")
Reported-by: Fengguang Wu <fengguang.wu@gmail.com>
Cc: Iulia Manda <iulia.manda21@gmail.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-07-17 16:39:52 -07:00
Michal Hocko
fbd7dc744a MAINTAINERS: change mhocko's email address to kernel.org
I am moving from mhocko@suse.cz to mhocko@kernel.org for kernel related
stuff.

Signed-off-by: Michal Hocko <mhocko@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-07-17 16:39:52 -07:00
Iago López Galeiras
db5d5b3665 fs, proc: add help for CONFIG_PROC_CHILDREN
The purpose of the option was documented in
Documentation/filesystems/proc.txt but the help text was missing.

Add small help text that also points to the documentation.

Signed-off-by: Iago López Galeiras <iago@endocode.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-07-17 16:39:52 -07:00
Jiri Slaby
d8130624b0 MAINTAINERS: switch to suse.com many-in-one (fwd)
Since suse.{de,cz} is deprecated to use (but will still work for some
time), switch to suse.com which is now to be used instead.

Signed-off-by: Jiri Slaby <jslaby@suse.com>
Acked-by: Alexander Graf <agraf@suse.de>
Acked-by: David Sterba <dsterba@suse.com>
Acked-by: Hannes Reinecke <hare@suse.com>
Acked-by: Jan Kara <jack@suse.com>
Acked-by: Jean Delvare <jdelvare@suse.com>
Acked-by: Jiri Kosina <jkosina@suse.com>
Acked-by: Michal Marek <mmarek@suse.com>
Acked-by: NeilBrown <neilb@suse.com>
Acked-by: Oliver Neukum <oneukum@suse.de>
Acked-by: Takashi Iwai <tiwai@suse.com>
Acked-by: Thomas Renninger <trenn@suse.de>
Acked-by: Tomas Cech <sleep_walker@suse.com>
Acked-by: Vojtech Pavlik <vojtech@suse.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-07-17 16:39:52 -07:00
Fabio Estevam
d80238bbca rtc: armada38x: Remove unused variable from armada38x_rtc_set_time()
Remove the 'flags' variable in order to fix the following warning:

drivers/rtc/rtc-armada38x.c:91:22: warning: unused variable 'flags' [-Wunused-variable]

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-07-18 00:42:31 +02:00
Wei-Ning Huang
baeca4495f rtc: mt6397: enable wakeup before registering rtc device
rtc_sysfs_add_device checks if device can wakeup before creating the
wakealarm file in sysfs. Thus the driver must set wakeup capability
before registering the rtc device.

Signed-off-by: Wei-Ning Huang <wnhuang@google.com>
Acked-by: Eddie Huang <eddie.huang@mediatek.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-07-18 00:42:15 +02:00
Mars Cheng
7d4938c14d ARM: dts: mediatek: add mt6580 basic support
This adds basic chip support for Mediatek 6580.

Signed-off-by: Mars Cheng <mars.cheng@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2015-07-18 00:22:42 +02:00
Mars Cheng
69a462b953 Document: DT: Add bindings for mediatek MT6580 SoC Platform
This adds a DT binding documentation for the MT6580 SoC from Mediatek.

Signed-off-by: Mars Cheng <mars.cheng@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2015-07-18 00:22:42 +02:00
Paul E. McKenney
cdacbe1f91 rcu: Add fastpath bypassing funnel locking
In the common case, there will be only one expedited grace period in
the system at a given time, in which case it is not helpful to use
funnel locking.  This commit therefore adds a fastpath that bypasses
funnel locking when the root ->exp_funnel_mutex is not held.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2015-07-17 14:59:06 -07:00
Paul E. McKenney
32bb1c7999 rcu: Rename RCU_GP_DONE_FQS to RCU_GP_DOING_FQS
The grace-period kthread sleeps waiting to do a force-quiescent-state
scan, and when awakened sets rsp->gp_state to RCU_GP_DONE_FQS.
However, this is confusing because the kthread has not done the
force-quiescent-state, but is instead just starting to do it.  This commit
therefore renames RCU_GP_DONE_FQS to RCU_GP_DOING_FQS in order to make
things a bit easier on reviewers.

Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2015-07-17 14:59:05 -07:00
Paul E. McKenney
b9a425cfcb rcu: Pull out wait_event*() condition into helper function
The condition for the wait_event_interruptible_timeout() that waits
to do the next force-quiescent-state scan is a bit ornate:

	((gf = READ_ONCE(rsp->gp_flags)) &
	 RCU_GP_FLAG_FQS) ||
	(!READ_ONCE(rnp->qsmask) &&
	 !rcu_preempt_blocked_readers_cgp(rnp))

This commit therefore pulls this condition out into a helper function
and comments its component conditions.

Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2015-07-17 14:59:04 -07:00
Paul E. McKenney
99a930b0d2 documentation: Describe new expedited stall warnings
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2015-07-17 14:59:03 -07:00
Paul E. McKenney
cf3620a6c7 rcu: Add stall warnings to synchronize_sched_expedited()
Although synchronize_sched_expedited() historically has no RCU CPU stall
warnings, the availability of the rcupdate.rcu_expedited boot parameter
invalidates the old assumption that synchronize_sched()'s stall warnings
would suffice.  This commit therefore adds RCU CPU stall warnings to
synchronize_sched_expedited().

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2015-07-17 14:59:01 -07:00
Paul E. McKenney
2cd6ffafec rcu: Extend expedited funnel locking to rcu_data structure
The strictly rcu_node based funnel-locking scheme works well in many
cases, but systems with CONFIG_RCU_FANOUT_LEAF=64 won't necessarily get
all that much concurrency.  This commit therefore extends the funnel
locking into the per-CPU rcu_data structure, providing concurrency equal
to the number of CPUs.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2015-07-17 14:59:00 -07:00
Paul E. McKenney
704dd435ac rcu: Consolidate last open-coded expedited memory barrier
One of the requirements on RCU grace periods is that if there is a
causal chain of operations that starts after one grace period and
ends before another grace period, then the two grace periods must
be serialized.  There has been (and might still be) code that relies
on this, for example, certain types of reference-counting code that
does a call_rcu() within an RCU callback function.

This requirement is why there is an smp_mb() at the end of both
synchronize_sched_expedited() and synchronize_rcu_expedited().
However, this is the only smp_mb() in these functions, so it would
be nicer to consolidate it into rcu_exp_gp_seq_end().  This commit
does just that.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2015-07-17 14:58:59 -07:00
Paul E. McKenney
4f525a528b rcu: Apply rcu_seq operations to _rcu_barrier()
The rcu_seq operations were open-coded in _rcu_barrier(), so this commit
replaces the open-coding with the shiny new rcu_seq operations.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2015-07-17 14:58:57 -07:00
Paul E. McKenney
29fd930940 rcu: Use funnel locking for synchronize_rcu_expedited()'s polling loop
This commit gets rid of synchronize_rcu_expedited()'s mutex_trylock()
polling loop in favor of the funnel-locking scheme that was abstracted
from synchronize_sched_expedited().

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2015-07-17 14:58:56 -07:00
Paul E. McKenney
7fd0ddc5bf rcu: Fix synchronize_sched_expedited() type error for "s"
The type of "s" has been "long" rather than the correct "unsigned long"
for quite some time.  This commit fixes this type error.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2015-07-17 14:58:55 -07:00
Paul E. McKenney
b09e5f8601 rcu: Abstract funnel locking from synchronize_sched_expedited()
This commit abstracts funnel locking from synchronize_sched_expedited()
so that it may be used by synchronize_rcu_expedited().

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2015-07-17 14:58:53 -07:00
Paul E. McKenney
543c6158f6 rcu: Make synchronize_rcu_expedited() use sequence-counter scheme
Although synchronize_rcu_expedited() uses a sequence-counter scheme, it
is based on a single increment per grace period, which means that tasks
piggybacking off of concurrent grace periods may be forced to wait longer
than necessary.  This commit therefore applies the new sequence-count
functions developed for synchronize_sched_expedited() to speed things
up a bit and to consolidate the sequence-counter implementation.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2015-07-17 14:58:52 -07:00
Paul E. McKenney
28f00767e3 rcu: Abstract sequence counting from synchronize_sched_expedited()
This commit creates rcu_exp_gp_seq_start() and rcu_exp_gp_seq_end() to
bracket an expedited grace period, rcu_exp_gp_seq_snap() to snapshot the
sequence counter, and rcu_exp_gp_seq_done() to check to see if a full
expedited grace period has elapsed since the snapshot.  These will be
applied to synchronize_rcu_expedited().  These are defined in terms of
underlying rcu_seq_start(), rcu_seq_end(), rcu_seq_snap(), rcu_seq_done(),
which will be applied to _rcu_barrier().

One reason that this commit doesn't use the seqcount primitives themselves
is that the smp_wmb() in those primitive is insufficient due to the fact
that expedited grace periods do reads as well as writes.  In addition,
the read-side seqcount primitives detect a potentially partial change,
where the expedited primitives instead need a guaranteed full change.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2015-07-17 14:58:51 -07:00