Commit graph

546,446 commits

Author SHA1 Message Date
Peter Zijlstra
3a6d7c64d7 rcu: Make expedited GP CPU stoppage asynchronous
Sequentially stopping the CPUs slows down expedited grace periods by
at least a factor of two, based on rcutorture's grace-period-per-second
rate.  This is a conservative measure because rcutorture uses unusually
long RCU read-side critical sections and because rcutorture periodically
quiesces the system in order to test RCU's ability to ramp down to and
up from the idle state.  This commit therefore replaces the stop_one_cpu()
with stop_one_cpu_nowait(), using an atomic-counter scheme to determine
when all CPUs have passed through the stopped state.

Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2015-07-17 14:58:50 -07:00
Paul E. McKenney
385b73c06f rcu: Get rid of synchronize_sched_expedited()'s polling loop
This commit gets rid of synchronize_sched_expedited()'s mutex_trylock()
polling loop in favor of a funnel-locking scheme based on the rcu_node
tree.  The work-done check is done at each level of the tree, allowing
high-contention situations to be resolved quickly with reasonable levels
of mutex contention.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2015-07-17 14:58:48 -07:00
Paul E. McKenney
d6ada2cf2f rcu: Rework synchronize_sched_expedited() counter handling
Now that synchronize_sched_expedited() have a mutex, it can use simpler
work-already-done detection scheme.  This commit simplifies this scheme
by using something similar to the sequence-locking counter scheme.
A counter is incremented before and after each grace period, so that
the counter is odd in the midst of the grace period and even otherwise.
So if the counter has advanced to the second even number that is
greater than or equal to the snapshot, the required grace period has
already happened.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2015-07-17 14:58:47 -07:00
Peter Zijlstra
c190c3b16c rcu: Switch synchronize_sched_expedited() to stop_one_cpu()
The synchronize_sched_expedited() currently invokes try_stop_cpus(),
which schedules the stopper kthreads on each online non-idle CPU,
and waits until all those kthreads are running before letting any
of them stop.  This is disastrous for real-time workloads, which
get hit with a preemption that is as long as the longest scheduling
latency on any CPU, including any non-realtime housekeeping CPUs.
This commit therefore switches to using stop_one_cpu() on each CPU
in turn.  This avoids inflicting the worst-case scheduling latency
on the worst-case CPU onto all other CPUs, and also simplifies the
code a little bit.

Follow-up commits will simplify the counter-snapshotting algorithm
and convert a number of the counters that are now protected by the
new ->expedited_mutex to non-atomic.

Signed-off-by: Peter Zijlstra <peterz@infradead.org>
[ paulmck: Kept stop_one_cpu(), dropped disabling of "guardrails". ]
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2015-07-17 14:58:45 -07:00
Paul E. McKenney
75c27f119b rcu: Remove CONFIG_RCU_CPU_STALL_INFO
The CONFIG_RCU_CPU_STALL_INFO has been default-y for a couple of
releases with no complaints, so it is time to eliminate this Kconfig
option entirely, so that the long-form RCU CPU stall warnings cannot
be disabled.  This commit does just that.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2015-07-17 14:58:44 -07:00
Paul E. McKenney
9b68387450 rcu: Stop disabling CPU hotplug in synchronize_rcu_expedited()
The fact that tasks could be migrated from leaf to root rcu_node
structures meant that synchronize_rcu_expedited() had to disable
CPU hotplug.  However, tasks now stay put, so this commit removes the
CPU-hotplug disabling from synchronize_rcu_expedited().

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2015-07-17 14:58:42 -07:00
Paul E. McKenney
13bd64947f rcu: Reset rcu_fanout_leaf if out of bounds
Currently if the rcu_fanout_leaf boot parameter is out of bounds (that
is, less than RCU_FANOUT_LEAF or greater than the number of bits in an
unsigned long), a warning is issued and execution continues with the
out-of-bounds value.  This can result in all manner of failures, so this
patch resets rcu_fanout_leaf to RCU_FANOUT_LEAF when an out-of-bounds
condition is detected.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2015-07-17 14:58:41 -07:00
Alexander Gordeev
032dfc8722 rcu: Shut up bogus gcc array bounds warning
Because gcc does not realize a loop would not be entered ever
(i.e. in case of rcu_num_lvls == 1):

  for (i = 1; i < rcu_num_lvls; i++)
	  rsp->level[i] = rsp->level[i - 1] + levelcnt[i - 1];

some compiler (pre- 5.x?) versions give a bogus warning:

  kernel/rcu/tree.c: In function ‘rcu_init_one.isra.55’:
  kernel/rcu/tree.c:4108:13: warning: array subscript is above array bounds [-Warray-bounds]
     rsp->level[i] = rsp->level[i - 1] + rsp->levelcnt[i - 1];
               ^
Fix that warning by adding an extra item to rcu_state::level[]
array. Once the bogus warning is fixed in gcc and kernel drops
support of older versions, the dummy item may be removed from
the array.

Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Suggested-by: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2015-07-17 14:58:40 -07:00
Koro Chen
c02e0e86d3 arm64: dts: mt8173: Add afe device node
This adds afe (audio front end) device node to the MT8173 dtsi file.

Signed-off-by: Koro Chen <koro.chen@mediatek.com>
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2015-07-17 23:54:19 +02:00
Viresh Kumar
42994af63c cpufreq: governor: rename cur_policy as policy
Just call it 'policy', cur_policy is unnecessarily long and doesn't
have any special meaning.

Reviewed-by: Preeti U Murthy <preeti@linux.vnet.ibm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-07-17 23:46:48 +02:00
Viresh Kumar
49a9a40c1b cpufreq: governor: name pointer to cpu_dbs_info as 'cdbs'
It is called as 'cdbs' at most of the places and 'cpu_dbs' at others.
Lets use 'cdbs' consistently for better readability.

Reviewed-by: Preeti U Murthy <preeti@linux.vnet.ibm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-07-17 23:46:48 +02:00
Viresh Kumar
875b8508f9 cpufreq: governor: Rename 'cpu_dbs_common_info' to 'cpu_dbs_info'
Its not common info to all CPUs, but a structure representing common
type of cpu info to both governor types. Lets drop 'common_' from its
name.

Reviewed-by: Preeti U Murthy <preeti@linux.vnet.ibm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-07-17 23:46:48 +02:00
Viresh Kumar
d3574c8511 cpufreq: governor: Drop unused field 'cpu'
Its not used at all, drop it.

Reviewed-by: Preeti U Murthy <preeti@linux.vnet.ibm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-07-17 23:46:47 +02:00
Viresh Kumar
386d46e6d5 cpufreq: governor: Name delayed-work as dwork
Delayed work was named as 'work' and to access work within it we do
work.work. Not much readable. Rename delayed_work as 'dwork'.

Reviewed-by: Preeti U Murthy <preeti@linux.vnet.ibm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-07-17 23:46:47 +02:00
Colin Ian King
f4745a9278 PM / clk: don't return int on __pm_clk_enable()
Static analysis by cppcheck found an issue that was recently introduced by
commit 471f7707b6 ("PM / clock_ops: make __pm_clk_enable more generic")
where a return status in ret was not being initialised and garbage
being returned when ce->status >= PCE_STATUS_ERROR.

The fact that ret is not being checked by the caller and that
ret is only used internally __pm_clk_enable() to check if clk_enable()
was OK means we can ignore returning it instead turn
__pm_clk_enable() into function with a void return.

Fixes: 471f7707b6 ("PM / clock_ops: make __pm_clk_enable more generic")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-07-17 22:58:13 +02:00
Rafael J. Wysocki
1dcc3d3362 ACPI / bus: Move ACPI bus type registration
Move the registration of the ACPI bus type to acpi_bus_init() and
avoid using ACPI going forward if it fails (too many things depend on
the presence of the ACPI bus type).

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-07-17 22:54:09 +02:00
Rafael J. Wysocki
5894b0c46e ACPI / scan: Move bus operations and notification routines to bus.c
To reduce the size of scan.c and improve the readability of it, move
code related to device notification, the definitions of the ACPI bus
operations and the driver management code to drivers/acpi/bus.c.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-07-17 22:54:01 +02:00
Rafael J. Wysocki
68c6b148da ACPI / scan: Move device matching code to bus.c
To reduce the size of scan.c and improve the readability of it, move
code related device matching into drivers/acpi/bus.c.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-07-17 22:53:52 +02:00
Rafael J. Wysocki
c2efefb33a ACPI / scan: Move sysfs-related device code to a separate file
To reduce the size of scan.c and improve the readability of it, move
all code related to device sysfs, modalias creation etc. to a new
file called device_sysfs.c.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-07-17 22:53:43 +02:00
Christophe JAILLET
25e5eaf199 ALSA: sparc: Add missing kfree in error path
If 'of_ioremap' fails, then 'amd' should be freed, otherwise, there is a
memory leak.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-07-17 22:29:43 +02:00
Daniel Vetter
e0548f1979 drm/i915: Update DRIVER_DATE to 20150717
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-07-17 22:24:32 +02:00
kbuild test robot
6de52c1513 pinctrl: pinconf: pinconf_show_config() can be static
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-07-17 21:56:23 +02:00
Thomas Gleixner
eeef97b182 pinctrl/sunxi: Prepare sunxi_pinctrl_irq_handler for irq argument removal
The irq argument of most interrupt flow handlers is unused or merily
used instead of a local variable. The handlers which need the irq
argument can retrieve the irq number from the irq descriptor.

Search and update was done with coccinelle and the invaluable help of
Julia Lawall.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-gpio@vger.kernel.org
2015-07-17 21:56:23 +02:00
Thomas Gleixner
3b0d1561ea pinctrl/sirf: Prepare xxx_gpio-handle_irq for irq argument removal
The irq argument of most interrupt flow handlers is unused or merily
used instead of a local variable. The handlers which need the irq
argument can retrieve the irq number from the irq descriptor.

Search and update was done with coccinelle and the invaluable help of
Julia Lawall.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-gpio@vger.kernel.org
2015-07-17 21:56:22 +02:00
Thomas Gleixner
d1800c2347 pinctrl/qcom/msm: Prepare msm_gpio_irq_handler for irq argument removal
The irq argument of most interrupt flow handlers is unused or merily
used instead of a local variable. The handlers which need the irq
argument can retrieve the irq number from the irq descriptor.

Search and update was done with coccinelle and the invaluable help of
Julia Lawall.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-gpio@vger.kernel.org
2015-07-17 21:56:22 +02:00
Thomas Gleixner
415f748c86 pinctrl/rockchip: Prepare rockchip_irq_demux for irq argument removal
The irq argument of most interrupt flow handlers is unused or merily
used instead of a local variable. The handlers which need the irq
argument can retrieve the irq number from the irq descriptor.

Search and update was done with coccinelle and the invaluable help of
Julia Lawall.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-gpio@vger.kernel.org
2015-07-17 21:56:21 +02:00
Thomas Gleixner
f43ebaf126 pinctrl/pistachio: Prepare pistachio_gpio_irq_handler for irq argument removal
The irq argument of most interrupt flow handlers is unused or merily
used instead of a local variable. The handlers which need the irq
argument can retrieve the irq number from the irq descriptor.

Search and update was done with coccinelle and the invaluable help of
Julia Lawall.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-gpio@vger.kernel.org
2015-07-17 21:56:21 +02:00
Thomas Gleixner
fc02a46938 pinctrl/coh901: Prepare u300_gpio_irq_handler for irq argument removal
The irq argument of most interrupt flow handlers is unused or merily
used instead of a local variable. The handlers which need the irq
argument can retrieve the irq number from the irq descriptor.

Search and update was done with coccinelle and the invaluable help of
Julia Lawall.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-gpio@vger.kernel.org
2015-07-17 21:56:21 +02:00
Thomas Gleixner
fa00fecc16 pinctrl/amd: Prepare amd_gpio_irq_handler for irq argument removal
The irq argument of most interrupt flow handlers is unused or merily
used instead of a local variable. The handlers which need the irq
argument can retrieve the irq number from the irq descriptor.

Search and update was done with coccinelle and the invaluable help of
Julia Lawall.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
2015-07-17 21:56:20 +02:00
Jiang Liu
5663bb27de pinctrl: Use irq_desc_get_xxx() to avoid redundant lookup of irq_desc
Use irq_desc_get_xxx() to avoid redundant lookup of irq_desc while we
already have a pointer to corresponding irq_desc.

Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-gpio@vger.kernel.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-17 21:56:20 +02:00
Thomas Gleixner
f66eb498ff pinctrl/samsung: Use irq_set_handler_locked()
Use irq_set_handler_locked() as it avoids a redundant lookup of the
irq descriptor.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-gpio@vger.kernel.org
2015-07-17 21:56:20 +02:00
Thomas Gleixner
40ec168ace pinctrl/exynos: Use irq_set_handler_locked()
Use irq_set_handler_locked() as it avoids a redundant lookup of the
irq descriptor.

Search and replacement was done with coccinelle.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Julia Lawall <julia.lawall@lip6.fr>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-gpio@vger.kernel.org
2015-07-17 21:56:19 +02:00
Thomas Gleixner
34c0ad84f3 pinctrl/qcom: Use irq_set_handler_locked()
Use irq_set_handler_locked() as it avoids a redundant lookup of the
irq descriptor.

Search and replacement was done with coccinelle.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Julia Lawall <julia.lawall@lip6.fr>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-gpio@vger.kernel.org
2015-07-17 21:56:19 +02:00
Thomas Gleixner
2dbf1bc5a2 pinctrl/rockchip: Use irq_set_handler_locked()
Use irq_set_handler_locked() as it avoids a redundant lookup of the
irq descriptor.

Search and replacement was done with coccinelle.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Julia Lawall <julia.lawall@lip6.fr>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-gpio@vger.kernel.org
2015-07-17 21:56:18 +02:00
Thomas Gleixner
c639845bcb pinctrl/at91: Use irq_set_handler_locked()
Use irq_set_handler_locked() as it avoids a redundant lookup of the
irq descriptor.

Search and replacement was done with coccinelle.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Julia Lawall <julia.lawall@lip6.fr>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-gpio@vger.kernel.org
2015-07-17 21:56:18 +02:00
Thomas Gleixner
9d8293147e pinctrl/amd: Use irq_set_handler_locked()
Use irq_set_handler_locked() as it avoids a redundant lookup of the
irq descriptor.

Search and replacement was done with coccinelle.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Julia Lawall <julia.lawall@lip6.fr>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-gpio@vger.kernel.org
2015-07-17 21:56:18 +02:00
Thomas Gleixner
e0d6a2c6ce pinctrl/adi2: Use irq_set_handler_locked()
Use irq_set_handler_locked() as it avoids a redundant lookup of the
irq descriptor.

Search and update was done with coccinelle.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Julia Lawall <julia.lawall@lip6.fr>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-gpio@vger.kernel.org
2015-07-17 21:56:17 +02:00
Thomas Gleixner
fc756bcd6a pinctrl/intel: Use irq_set_handler_locked()
Use irq_set_handler_locked() as it avoids a redundant lookup of the
irq descriptor.

Search and replacement was done with coccinelle.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Julia Lawall <julia.lawall@lip6.fr>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-gpio@vger.kernel.org
2015-07-17 21:56:17 +02:00
Thomas Gleixner
a4e3f7830f pinctrl/cherryview: Use irq_set_handler_locked()
Use irq_set_handler_locked() as it avoids a redundant lookup of the
irq descriptor.

Search and replacement was done with coccinelle.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Julia Lawall <julia.lawall@lip6.fr>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-gpio@vger.kernel.org
2015-07-17 21:56:17 +02:00
Thomas Gleixner
f3a085b417 pinctrl/baytrail: Use irq_set_handler_locked()
Use irq_set_handler_locked() as it avoids a redundant lookup of the
irq descriptor.

Search and replacement was done with coccinelle.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Julia Lawall <julia.lawall@lip6.fr>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-gpio@vger.kernel.org
2015-07-17 21:56:16 +02:00
Thomas Gleixner
1aa74fd0bb pinctrl/bcm2835: Use irq_set_handler_locked()
Use irq_set_handler_locked() as it avoids a redundant lookup of the
irq descriptor.

Search and replacement was done with coccinelle.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Julia Lawall <julia.lawall@lip6.fr>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-gpio@vger.kernel.org
2015-07-17 21:56:16 +02:00
Thomas Gleixner
c21f7849f1 pinctrl/exynos: Consolidate chained IRQ handler install/remove
Chained irq handlers usually set up handler data as well. We now have
a function to set both under irq_desc->lock. Replace the two calls
with one.

Search and conversion was done with coccinelle.

Reported-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-gpio@vger.kernel.org
2015-07-17 21:56:16 +02:00
Thomas Gleixner
20d5d142a6 pinctrl: Consolidate chained IRQ handler install/remove
Chained irq handlers usually set up handler data as well. We now have
a function to set both under irq_desc->lock. Replace the two calls
with one.

Search and conversion was done with coccinelle.

Reported-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-gpio@vger.kernel.org
2015-07-17 21:56:15 +02:00
Thomas Gleixner
03051bc242 pinctrl/rockchip: Consolidate chained IRQ handler install/remove
Chained irq handlers usually set up handler data as well. We now have
a function to set both under irq_desc->lock. Replace the two calls
with one.

Search and conversion was done with coccinelle.

Reported-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-gpio@vger.kernel.org
2015-07-17 21:56:15 +02:00
Timur Tabi
8f1338cd80 pinctrl: add support for Qualcomm Technologies QDF2xxx ARM64 SoCs
Add the pinctrl driver for the Qualcomm Technologies QDF2xxx ARM64 SoCs,
which uses the Qualcomm Technologies TLMM pinctrl/gpio device.  This
driver is probed via ACPI and uses the pinctrl-msm.c backend driver.

This driver is intended to be used only an ACPI-enabled system.  As such,
UEFI will handle all pin control configuration, so this driver does not
provide pin control functions.  It is effectively a GPIO-only driver.

Signed-off-by: Timur Tabi <timur@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-07-17 21:56:14 +02:00
Bjorn Andersson
b4c45fe974 pinctrl: qcom: ssbi: Family A gpio & mpp drivers
This introduces pinctrl drivers for gpio and mpp blocks found in family A
PMICs.

Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-07-17 21:56:14 +02:00
Sascha Hauer
d57b1d2860 ARM: dts: mediatek mt8135: Use real UART clocks
We used to provide dummy clocks for the UART. Now that we have
common clock support we can provide the real clocks to the UART.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2015-07-17 21:43:27 +02:00
Sascha Hauer
aada7d5298 ARM: dts: mt8135-evbp1: Add PMIC support
The MT8135 eval board contains a MT6397 PMIC. This adds the
corresponding device node to the dts file.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2015-07-17 21:43:17 +02:00
Sascha Hauer
8dd29d28ac ARM: dts: mt8135: Add pmic wrapper nodes
This adds the pmic wrapper node to the MediaTek MT8135 dtsi file.

This unit is used to access the PMIC on MediaTek boards.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2015-07-17 21:43:04 +02:00
James Liao
3cc17a5c26 ARM: dts: mediatek: Enable clock support for Mediatek MT8135.
This patch adds MT8135 clock controllers into device tree.

Signed-off-by: James Liao <jamesjj.liao@mediatek.com>
Signed-off-by: Henry Chen <henryc.chen@mediatek.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2015-07-17 21:42:55 +02:00