The LPVO USB GPIB adapter apparently uses an FTDI 8U232AM with the
default PID, but this device id is already handled by the ftdi_sio
serial driver.
Stop binding to the default PID to avoid breaking existing setups with
FTDI 8U232AM.
Anyone using this driver should blacklist the ftdi_sio driver and add
the device id manually through sysfs (e.g. using udev rules).
Fixes: fce79512a9 ("staging: gpib: Add LPVO DIY USB GPIB driver")
Fixes: e6ab504633 ("staging: gpib: Destage gpib")
Cc: Dave Penkler <dpenkler@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260305151729.10501-2-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- Add a dedicated thread for each svc client to fix a timeout issue when the svc
driver is handling multiple clients.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEoHhMeiyk5VmwVMwNGZQEC4GjKPQFAmmwSAEACgkQGZQEC4Gj
KPT46A/+OTfiKnqA/yLr2phsyWfvZUIU99gcki+8dBRiMidKWyFQvBhGNZTg9SpS
onQN2rYXmnLFER54wP4xjPZyUbojlz46GUa6jI0i32o7HKVuuJ042jIPEnvdJxGL
3rSvox/lRXbO/Dey3n525tmn4Dx1Zc1hFXon40G+9LMdH/LpM8HIXFPDIG5pvsp6
+Ks0ZccS3Jr6WjIrYy8wBP2pWarKVkp5o/HKh5AkyS2EQ592+bpCsrCqmFrOgXWi
8Ev9zHOkEH13B8nqQ9kzncYr1an5+pWbXNQDTyBct3vN6RL+MRajp/MdLtBEdkDd
ADtJUlC/hB2ZrLsPfGoDoH3US5cgFtQ79hNOr8uCmdsuVIpzTl1UW/ZPkLvN2OLp
BFTzP8onKh6VDFHNO/bOWJPC/e3J6xEGjl/ANGw+wiG/8ZkMEJ+b+Rn9aqvifiuS
8IVqJKQhosd0wbyLN3z++lHNgOSxcbzhVhl5wVnF36ouPRgzC5XxeKHL+22YUDWE
YyTxiNFZoXbIcK9r8zNmciIpBwHGZyYHcXNgSs9+ldx4zyrPfiub386MFmxUmr5w
qwW/g9igxZMLAgR8Wdh5SlQG8AdIVWZ/ICSDnNjXBwC/3wubQWqVdbNRh4l0yzfK
Rl2pwFB3+NbJ9OXFwiUKLi7UHqEJPEPRC2BWK+hsfKbsWdMgV5k=
=nIUm
-----END PGP SIGNATURE-----
Merge tag 'stratix10_svc_fix_for_v7.0' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into char-misc-linus
Dinh writes:
firmware: stratix10-svc: add multiple svc clients support
- Add a dedicated thread for each svc client to fix a timeout issue when the svc
driver is handling multiple clients.
* tag 'stratix10_svc_fix_for_v7.0' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
firmware: stratix10-svc: Add Multi SVC clients support
In the current implementation, SVC client drivers such as socfpga-hwmon,
intel_fcs, stratix10-soc, stratix10-rsu each send an SMC command that
triggers a single thread in the stratix10-svc driver. Upon receiving a
callback, the initiating client driver sends a stratix10-svc-done signal,
terminating the thread without waiting for other pending SMC commands to
complete. This leads to a timeout issue in the firmware SVC mailbox service
when multiple client drivers send SMC commands concurrently.
To resolve this issue, a dedicated thread is now created per channel. The
stratix10-svc driver will support up to the number of channels defined by
SVC_NUM_CHANNEL. Thread synchronization is handled using a mutex to prevent
simultaneous issuance of SMC commands by multiple threads.
SVC_NUM_DATA_IN_FIFO is reduced from 32 to 8, since each channel now has
its own dedicated FIFO and the SDM processes commands one at a time.
8 entries per channel is sufficient while keeping the total aggregate
capacity the same (4 channels x 8 = 32 entries).
Additionally, a thread task is now validated before invoking kthread_stop
when the user aborts, ensuring safe termination.
Timeout values have also been adjusted to accommodate the increased load
from concurrent client driver activity.
Fixes: 7ca5ce8965 ("firmware: add Intel Stratix10 service layer driver")
Cc: stable@vger.kernel.org
Signed-off-by: Ang Tien Sung <tien.sung.ang@altera.com>
Signed-off-by: Fong, Yan Kei <yankei.fong@altera.com>
Signed-off-by: Muhammad Amirul Asyraf Mohamad Jamian <muhammad.amirul.asyraf.mohamad.jamian@altera.com>
Link: https://lore.kernel.org/all/20260305093151.2678-1-muhammad.amirul.asyraf.mohamad.jamian@altera.com
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
There's no reason to lock the whole mm when we are doing operations on
the vma if we can help it, so to reduce contention, use the
lock_vma_under_rcu() abstraction.
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Jann Horn <jannh@google.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Link: https://patch.msgid.link/20260218-binder-vma-rcu-v1-1-8bd45b2b1183@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Consider the following sequence of events on a death listener:
1. The remote process dies and sends a BR_DEAD_BINDER message.
2. The local process invokes the BC_CLEAR_DEATH_NOTIFICATION command.
3. The local process then invokes the BC_DEAD_BINDER_DONE.
Then, the kernel will reply to the BC_DEAD_BINDER_DONE command with a
BR_CLEAR_DEATH_NOTIFICATION_DONE reply using push_work_if_looper().
However, this can result in a deadlock if the current thread is not a
looper. This is because dead_binder_done() still holds the proc lock
during set_notification_done(), which called push_work_if_looper().
Normally, push_work_if_looper() takes the thread lock, which is fine to
take under the proc lock. But if the current thread is not a looper,
then it falls back to delivering the reply to the process work queue,
which involves taking the proc lock. Since the proc lock is already
held, this is a deadlock.
Fix this by releasing the proc lock during set_notification_done(). It
was not intentional that it was held during that function to begin with.
I don't think this ever happens in Android because BC_DEAD_BINDER_DONE
is only invoked in response to BR_DEAD_BINDER messages, and the kernel
always delivers BR_DEAD_BINDER to a looper. So there's no scenario where
Android userspace will call BC_DEAD_BINDER_DONE on a non-looper thread.
Cc: stable <stable@kernel.org>
Fixes: eafedbc7c0 ("rust_binder: add Rust Binder driver")
Reported-by: syzbot+c8287e65a57a89e7fb72@syzkaller.appspotmail.com
Tested-by: syzbot+c8287e65a57a89e7fb72@syzkaller.appspotmail.com
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://patch.msgid.link/20260224-binder-dead-binder-done-proc-lock-v1-1-bbe1b8a6e74a@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When sending a transaction, its offsets array is first copied into the
target proc's vma, and then the values are read back from there. This is
normally fine because the vma is a read-only mapping, so the target
process cannot change the value under us.
However, if the target process somehow gains the ability to write to its
own vma, it could change the offset before it's read back, causing the
kernel to misinterpret what the sender meant. If the sender happens to
send a payload with a specific shape, this could in the worst case lead
to the receiver being able to privilege escalate into the sender.
The intent is that gaining the ability to change the read-only vma of
your own process should not be exploitable, so remove this TOCTOU read
even though it's unexploitable without another Binder bug.
Cc: stable <stable@kernel.org>
Fixes: eafedbc7c0 ("rust_binder: add Rust Binder driver")
Reported-by: Jann Horn <jannh@google.com>
Reviewed-by: Jann Horn <jannh@google.com>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Acked-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Link: https://patch.msgid.link/20260218-binder-vma-check-v2-2-60f9d695a990@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When installing missing pages (or zapping them), Rust Binder will look
up the vma in the mm by address, and then call vm_insert_page (or
zap_page_range_single). However, if the vma is closed and replaced with
a different vma at the same address, this can lead to Rust Binder
installing pages into the wrong vma.
By installing the page into a writable vma, it becomes possible to write
to your own binder pages, which are normally read-only. Although you're
not supposed to be able to write to those pages, the intent behind the
design of Rust Binder is that even if you get that ability, it should not
lead to anything bad. Unfortunately, due to another bug, that is not the
case.
To fix this, store a pointer in vm_private_data and check that the vma
returned by vma_lookup() has the right vm_ops and vm_private_data before
trying to use the vma. This should ensure that Rust Binder will refuse
to interact with any other VMA. The plan is to introduce more vma
abstractions to avoid this unsafe access to vm_ops and vm_private_data,
but for now let's start with the simplest possible fix.
C Binder performs the same check in a slightly different way: it
provides a vm_ops->close that sets a boolean to true, then checks that
boolean after calling vma_lookup(), but this is more fragile
than the solution in this patch. (We probably still want to do both, but
the vm_ops->close callback will be added later as part of the follow-up
vma API changes.)
It's still possible to remap the vma so that pages appear in the right
vma, but at the wrong offset, but this is a separate issue and will be
fixed when Rust Binder gets a vm_ops->close callback.
Cc: stable <stable@kernel.org>
Fixes: eafedbc7c0 ("rust_binder: add Rust Binder driver")
Reported-by: Jann Horn <jannh@google.com>
Reviewed-by: Jann Horn <jannh@google.com>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Acked-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Link: https://patch.msgid.link/20260218-binder-vma-check-v2-1-60f9d695a990@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The spam detection logic in TreeRange was executed before the current
request was inserted into the tree. So the new request was not being
factored in the spam calculation. Fix this by moving the logic after
the new range has been inserted.
Also, the detection logic for ArrayRange was missing altogether which
meant large spamming transactions could get away without being detected.
Fix this by implementing an equivalent low_oneway_space() in ArrayRange.
Note that I looked into centralizing this logic in RangeAllocator but
iterating through 'state' and 'size' got a bit too complicated (for me)
and I abandoned this effort.
Cc: stable <stable@kernel.org>
Cc: Alice Ryhl <aliceryhl@google.com>
Fixes: eafedbc7c0 ("rust_binder: add Rust Binder driver")
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/20260210232949.3770644-1-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Usual mixed bag of ancient bugs that have been discovered and more
recent stuff.
core
- Cleanup a wait_queue if a driver is removed at exacty the wrong
moment.
adi,adf4377
- Check correct masks when waiting for reset to complete.
adi,adis
- Fix a NULL pointer dereference if ops not provided to adis_init()
bosch,bme680
- Fix typo in value used to calculate measurement wait duration.
infineon,tlv493d
- Drop incorrect shifting of some bits for x-axis
invensense,icm42600
- Fix corner case of output data rate being set to the value it already
has which resulted in waiting for ever for a flag to say the update was
completed.
- Fix a case where the buffer is turned off whilst ODR switch is in progress.
invensense,icm45600
- Interrupt 1 drive bit was inverted.
- Fix a underflow for regulator put warning if probe fails
invensense,mpu9150
- Work around a hardware quirk where reading from irq status is not sufficient
to acknowledge an interrupt.
maxim,ds4424
- Reject -128 as a possible raw value as it's out of range with the sign
/ magnitude encoding used by this chip.
microchip,mcp4131
- Shift the wiper value only once.
rohm,bh1780
- Fix a runtime reference count issue on an error path.
sensiron,sps30
- Fix two buffer size issues due to sizeof() wrong thing.
tyhx,hx9023s
- Ensure count used by __counted_by is set before accessing the buffer.
- Avoid a potential division by zero.
-----BEGIN PGP SIGNATURE-----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=/1XH
-----END PGP SIGNATURE-----
Merge tag 'iio-fixes-for-7.0a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into work-linus
Jonathan writes:
IIO: 1st set of fixes for the 7.0 cycle
Usual mixed bag of ancient bugs that have been discovered and more
recent stuff.
core
- Cleanup a wait_queue if a driver is removed at exacty the wrong
moment.
adi,adf4377
- Check correct masks when waiting for reset to complete.
adi,adis
- Fix a NULL pointer dereference if ops not provided to adis_init()
bosch,bme680
- Fix typo in value used to calculate measurement wait duration.
infineon,tlv493d
- Drop incorrect shifting of some bits for x-axis
invensense,icm42600
- Fix corner case of output data rate being set to the value it already
has which resulted in waiting for ever for a flag to say the update was
completed.
- Fix a case where the buffer is turned off whilst ODR switch is in progress.
invensense,icm45600
- Interrupt 1 drive bit was inverted.
- Fix a underflow for regulator put warning if probe fails
invensense,mpu9150
- Work around a hardware quirk where reading from irq status is not sufficient
to acknowledge an interrupt.
maxim,ds4424
- Reject -128 as a possible raw value as it's out of range with the sign
/ magnitude encoding used by this chip.
microchip,mcp4131
- Shift the wiper value only once.
rohm,bh1780
- Fix a runtime reference count issue on an error path.
sensiron,sps30
- Fix two buffer size issues due to sizeof() wrong thing.
tyhx,hx9023s
- Ensure count used by __counted_by is set before accessing the buffer.
- Avoid a potential division by zero.
* tag 'iio-fixes-for-7.0a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
iio: imu: adis: Fix NULL pointer dereference in adis_init
iio: imu: inv_icm45600: fix regulator put warning when probe fails
iio: buffer: Fix wait_queue not being removed
iio: gyro: mpu3050-core: fix pm_runtime error handling
iio: gyro: mpu3050-i2c: fix pm_runtime error handling
iio: adc: ad7768-1: Fix ERR_PTR dereference in ad7768_fill_scale_tbl
iio: chemical: sps30_serial: fix buffer size in sps30_serial_read_meas()
iio: chemical: sps30_i2c: fix buffer size in sps30_i2c_read_meas()
iio: magnetometer: tlv493d: remove erroneous shift in X-axis data
iio: proximity: hx9023s: Protect against division by zero in set_samp_freq
iio: proximity: hx9023s: fix assignment order for __counted_by
iio: chemical: bme680: Fix measurement wait duration calculation
iio: dac: ds4424: reject -128 RAW value
iio: imu: inv_icm45600: fix INT1 drive bit inverted
iio: potentiometer: mcp4131: fix double application of wiper shift
iio: imu: inv-mpu9150: fix irq ack preventing irq storms
iio: frequency: adf4377: Fix duplicated soft reset mask
iio: light: bh1780: fix PM runtime leak on error path
iio: imu: inv_icm42600: fix odr switch when turning buffer off
iio: imu: inv_icm42600: fix odr switch to the same value
- Fix a kernel panic that happens in the driver when the First Stage Boot Loader
has not enabled the Remote System Update(RSU).
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEoHhMeiyk5VmwVMwNGZQEC4GjKPQFAmmecTwACgkQGZQEC4Gj
KPTfgg//SDFKFBKnRXyrkaWZ7VFLNiLX4rVW2o0KepGgQSwd7ILWjZySoee/8JyJ
bFrkh1Rx+0fE31gdbIPYA72KBMj2O5VqkHYZAWsrJiOqABo8yxSLMP45mVqTvM3X
p53yozM4dunilV/xjp1zUq9+eZHa63OXImLVz7rkuGQUCZkvEj5rA6Ag6HZpHEjR
JIfjMdf8tDVmBxBVuFbIb+KHaSbkcgR7v34EUKBJv7CTu5wdwVa+Nje1vj0W9G1o
/f26qwlDHCISkHLdJI3cNF/1lsULh/FmVIyxEudzeqo/zYRMdDCenpylfOAe9Q67
HT6dmjmsmXZTUbPm43x1goGUC1wbok6BdNFCaSAmfFzuoEVN1JKTEewt1/9lHD+G
5FXs0ySBe7X28WRQ9IY5nRS2w8wdfzq+dxzPeCv6LOt/vzoS0+x/GtwxBkLL+BU7
hnWpQlc38/KSUfPDgxXUkoue+2Z47YLIHZ/cb7hza8d84B+WB2k/uMXJmjHqZJgJ
WDCRQAVobT0TQM2b17gTsfyr+IsS+oWtDhCPDywBcuUe7JxmocmFtki2+rd5m8rb
5QuPpwzeQbxZx/bAA1Vzexbh8q8JvD14b820Z2Tnp8D4yTG6/LJ2/x5LpHKKwpv5
q/ZszAHVf399a6PywqieUZ34qcz6gH7GmlgCnrN7Jf8lQ/oBP28=
=serB
-----END PGP SIGNATURE-----
Merge tag 'stratix10_rsu_fix_for_v7.0' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into work-linus
Dinh writes:
firmware: stratix10-rsu: fix NULL pointer dereference when RSU is disabled
- Fix a kernel panic that happens in the driver when the First Stage Boot Loader
has not enabled the Remote System Update(RSU).
* tag 'stratix10_rsu_fix_for_v7.0' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
firmware: stratix10-rsu: Fix NULL pointer dereference when RSU is disabled
When the Remote System Update (RSU) isn't enabled in the First Stage
Boot Loader (FSBL), the driver encounters a NULL pointer dereference when
excute svc_normal_to_secure_thread() thread, resulting in a kernel panic:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008
Mem abort info:
...
Data abort info:
...
[0000000000000008] user address but active_mm is swapper
Internal error: Oops: 0000000096000004 [#1] SMP
Modules linked in:
CPU: 0 UID: 0 PID: 79 Comm: svc_smc_hvc_thr Not tainted 6.19.0-rc8-yocto-standard+ #59 PREEMPT
Hardware name: SoCFPGA Stratix 10 SoCDK (DT)
pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : svc_normal_to_secure_thread+0x38c/0x990
lr : svc_normal_to_secure_thread+0x144/0x990
...
Call trace:
svc_normal_to_secure_thread+0x38c/0x990 (P)
kthread+0x150/0x210
ret_from_fork+0x10/0x20
Code: 97cfc113 f9400260 aa1403e1 f9400400 (f9400402)
---[ end trace 0000000000000000 ]---
The issue occurs because rsu_send_async_msg() fails when RSU is not enabled
in firmware, causing the channel to be freed via stratix10_svc_free_channel().
However, the probe function continues execution and registers
svc_normal_to_secure_thread(), which subsequently attempts to access the
already-freed channel, triggering the NULL pointer dereference.
Fix this by properly cleaning up the async client and returning early on
failure, preventing the thread from being used with an invalid channel.
Fixes: 15847537b6 ("firmware: stratix10-rsu: Migrate RSU driver to use stratix10 asynchronous framework.")
Cc: stable@kernel.org
Signed-off-by: Liwei Song <liwei.song@windriver.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
The adis_init() function dereferences adis->ops to check if the
individual function pointers (write, read, reset) are NULL, but does
not first check if adis->ops itself is NULL.
Drivers like adis16480, adis16490, adis16545 and others do not set
custom ops and rely on adis_init() assigning the defaults. Since struct
adis is zero-initialized by devm_iio_device_alloc(), adis->ops is NULL
when adis_init() is called, causing a NULL pointer dereference:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
pc : adis_init+0xc0/0x118
Call trace:
adis_init+0xc0/0x118
adis16480_probe+0xe0/0x670
Fix this by checking if adis->ops is NULL before dereferencing it,
falling through to assign the default ops in that case.
Fixes: 3b29bcee8f ("iio: imu: adis: Add custom ops struct")
Signed-off-by: Radu Sabau <radu.sabau@analog.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
When the driver probe fails we encounter a regulator put warning
because vddio regulator is not stopped before release. The issue
comes from pm_runtime not already setup when core probe fails and
the vddio regulator disable callback is called.
Fix the issue by setting pm_runtime active early before vddio
regulator resource cleanup. This requires to cut pm_runtime
set_active and enable in 2 function calls.
Fixes: 7ff021a3fa ("iio: imu: inv_icm45600: add new inv_icm45600 driver")
Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
In the edge case where the IIO device is unregistered while we're
buffering, we were directly returning an error without removing the wait
queue. Instead, set 'ret' and break out of the loop.
Fixes: 9eeee3b0bf ("iio: Add output buffer support")
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The return value of pm_runtime_get_sync() is not checked, allowing
the driver to access hardware that may fail to resume. The device
usage count is also unconditionally incremented. Use
pm_runtime_resume_and_get() which propagates errors and avoids
incrementing the usage count on failure.
In preenable, add pm_runtime_put_autosuspend() on set_8khz_samplerate()
failure since postdisable does not run when preenable fails.
Fixes: 3904b28efb ("iio: gyro: Add driver for the MPU-3050 gyroscope")
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The return value of pm_runtime_get_sync() is not checked, and the
function always returns success. This allows I2C mux operations to
proceed even when the device fails to resume.
Use pm_runtime_resume_and_get() and propagate its return value to
properly handle resume failures.
Fixes: 3904b28efb ("iio: gyro: Add driver for the MPU-3050 gyroscope")
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The function iio_get_current_scan_type() can return an error pointer,
the return value scan_type is not checked for this and immediately
dereferenced which can cause a kernel panic.
Add check for IS_ERR() and propagate the error back.
Fixes: ff085189cb ("iio: adc: ad7768-1: add support for ADAQ776x-1 ADC Family")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Closes: https://lore.kernel.org/r/202602051234.5gArzLyZ-lkp@intel.com/
Signed-off-by: Ethan Tidmore <ethantidmore06@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
sizeof(num) evaluates to sizeof(size_t) which is 8 bytes on 64-bit,
but the buffer elements are only 4 bytes. The same function already
uses sizeof(*meas) on line 312, making the mismatch evident. Use
sizeof(*meas) consistently.
Fixes: b2e171f5a5 ("iio: sps30: add support for serial interface")
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Acked-by: Tomasz Duszynski <tduszyns@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
sizeof(num) evaluates to sizeof(size_t) (8 bytes on 64-bit) instead
of the intended __be32 element size (4 bytes). Use sizeof(*meas) to
correctly match the buffer element type.
Fixes: 8f3f130852 ("iio: sps30: separate core and interface specific code")
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Acked-by: Tomasz Duszynski <tduszyns@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
TLV493D_BX2_MAG_X_AXIS_LSB is defined as GENMASK(7, 4). FIELD_GET()
already right-shifts bits [7:4] to [3:0], so the additional >> 4
discards most of the X-axis low nibble. The Y and Z axes correctly
omit this extra shift. Remove it.
Fixes: 106511d280 ("iio: magnetometer: add support for Infineon TLV493D 3D Magentic sensor")
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Avoid division by zero when sampling frequency is unspecified.
Fixes: 60df548277 ("iio: proximity: Add driver support for TYHX's HX9023S capacitive proximity sensor")
Signed-off-by: Yasin Lee <yasin.lee.x@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Initialize fw_size before copying firmware data into the flexible
array member to match the __counted_by() annotation. This fixes the
incorrect assignment order that triggers runtime safety checks.
Fixes: e9ed97be4f ("iio: proximity: hx9023s: Added firmware file parsing functionality")
Signed-off-by: Yasin Lee <yasin.lee.x@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This function refers to the Bosch BME680 API as the source of the
calculation, but one of the constants does not match the Bosch
implementation. This appears to be a simple transposition of two digits,
resulting in a wait time that is too short. This can cause the following
'device measurement cycle incomplete' check to occasionally fail, returning
EBUSY to user space.
Adjust the constant to match the Bosch implementation and resolve the EBUSY
errors.
Fixes: 4241665e6e ("iio: chemical: bme680: Fix sensor data read operation")
Link: https://github.com/boschsensortec/BME68x_SensorAPI/blob/v4.4.8/bme68x.c#L521
Signed-off-by: Chris Spencer <spencercw@gmail.com>
Acked-by: Vasileios Amoiridis <vassilisamir@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The DS442x DAC uses sign-magnitude encoding, so -128 cannot be represented
in hardware (7-bit magnitude).
Previously, passing -128 resulted in a truncated value that programmed
0mA (magnitude 0) instead of the expected maximum negative current,
effectively failing silently.
Reject -128 to avoid producing the wrong current.
Fixes: d632a2bd8f ("iio: dac: ds4422/ds4424 dac driver")
Cc: stable@vger.kernel.org
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Drive bit must be set for open-drain mode and be cleared for push-pull
mode.
Referring to datasheet DS-000576_ICM-45605.pdf section 17.23
INT1_CONFIG2.
Fixes: 06674a72cf ("iio: imu: inv_icm45600: add buffer support in iio devices")
Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The MCP4131 wiper address is shifted twice when preparing the SPI
command in mcp4131_write_raw().
The address is already shifted when assigned to the local variable
"address", but is then shifted again when written to data->buf[0].
This results in an incorrect command being sent to the device and
breaks wiper writes to the second channel.
Remove the second shift and use the pre-shifted address directly
when composing the SPI transfer.
Fixes: 22d199a539 ("iio: potentiometer: add driver for Microchip MCP413X/414X/415X/416X/423X/424X/425X/426X")
Signed-off-by: Lukas Schmid <lukas.schmid@netcube.li>#
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
IRQ needs to be acked. for some odd reasons, reading from irq status does
not reliable help, enable acking from any register to be on the safe side
and read the irq status register. Comments in the code indicate a known
unreliability with that register.
The blamed commit was tested with mpu6050 in lg,p895 and lg,p880 according
to Tested-bys. But with the MPU9150 in the Epson Moverio BT-200 this leads
to irq storms without properly acking the irq.
Fixes: 0a3b517c80 ("iio: imu: inv_mpu6050: fix interrupt status read for old buggy chips")
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Acked-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The regmap_read_poll_timeout() uses ADF4377_0000_SOFT_RESET_R_MSK
twice instead of checking both SOFT_RESET_MSK (bit 0) and
SOFT_RESET_R_MSK (bit 7). This causes an incomplete reset status check.
The code first sets both SOFT_RESET and SOFT_RESET_R bits to 1 via
regmap_update_bits(), then polls for them to be cleared. Since we set
both bits before polling, we should be waiting for both to clear.
Fix by using both masks as done in regmap_update_bits() above.
Fixes: eda549e2e5 ("iio: frequency: adf4377: add support for ADF4377")
Signed-off-by: SeungJu Cheon <suunj1331@gmail.com>
Cc: Stable@vger.kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Move pm_runtime_put_autosuspend() before the error check to ensure
the PM runtime reference count is always decremented after
pm_runtime_get_sync(), regardless of whether the read operation
succeeds or fails.
Fixes: 1f0477f183 ("iio: light: new driver for the ROHM BH1780")
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
ODR switch is done in 2 steps when FIFO is on : change the ODR register
value and acknowledge change when reading the FIFO ODR change flag.
When we are switching odr and turning buffer off just afterward, we are
losing the FIFO ODR change flag and ODR switch is blocked.
Fix the issue by force applying any waiting ODR change when turning
buffer off.
Fixes: ec74ae9fd3 ("iio: imu: inv_icm42600: add accurate timestamping")
Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
ODR switch is done in 2 steps when FIFO is on : change the ODR register
value and acknowledge change when reading the FIFO ODR change flag.
When we are switching to the same odr value, we end up waiting for a
FIFO ODR flag that is never happening.
Fix the issue by doing nothing and exiting properly when we are
switching to the same ODR value.
Fixes: ec74ae9fd3 ("iio: imu: inv_icm42600: add accurate timestamping")
Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
- Fix a build error on parisc
- Remove the non-large-folio-aware function fsverity_verify_page()
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCaZtg+xQcZWJpZ2dlcnNA
a2VybmVsLm9yZwAKCRDzXCl4vpKOKwQ+AQCiXEYAibl3vHRgQo7qEPCC5or4FtkF
HZ0ERRArhsU17AD/TKHE/AJkyFrwK4rGTb6I9Wi1OXnpG7jihZlYjj03Ag4=
=CUql
-----END PGP SIGNATURE-----
Merge tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fsverity/linux
Pull fsverity fixes from Eric Biggers:
- Fix a build error on parisc
- Remove the non-large-folio-aware function fsverity_verify_page()
* tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fsverity/linux:
fsverity: fix build error by adding fsverity_readahead() stub
fsverity: remove fsverity_verify_page()
f2fs: make f2fs_verify_cluster() partially large-folio-aware
f2fs: remove unnecessary ClearPageUptodate in f2fs_verify_cluster()
Fix a big endian specific issue in the PPC64-optimized AES code.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCaZtiphQcZWJpZ2dlcnNA
a2VybmVsLm9yZwAKCRDzXCl4vpKOK/z2AQD1j15Ao3iDW3yBSyTS+tFJaRUVDtjg
bNostoNJAjMM9wD/X0oAnt95WTNkdHexs+2aMzQ4ULKFRcwQrUTarKx7IgY=
=Dmfx
-----END PGP SIGNATURE-----
Merge tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull crypto library fix from Eric Biggers:
"Fix a big endian specific issue in the PPC64-optimized AES code"
* tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
lib/crypto: powerpc/aes: Fix rndkey_from_vsx() on big endian CPUs
Stephen retired and stepped back from -next maintainership, update his
entry in CREDITS to recognise his 18 years of hard work making it what
it is today and all the impact it's had on our development process.
Also update to his current GnuPG key while we're here.
Acked-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: SeongJae Park <sj@kernel.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The x509 public key code gained a dependency on the sha256 hash
implementation, causing a rare link time failure in randconfig
builds:
arm-linux-gnueabi-ld: crypto/asymmetric_keys/x509_public_key.o: in function `x509_get_sig_params':
x509_public_key.c:(.text.x509_get_sig_params+0x12): undefined reference to `sha256'
arm-linux-gnueabi-ld: (sha256): Unknown destination type (ARM/Thumb) in crypto/asymmetric_keys/x509_public_key.o
x509_public_key.c:(.text.x509_get_sig_params+0x12): dangerous relocation: unsupported relocation
Select the necessary library code from Kconfig.
Fixes: 2c62068ac8 ("x509: Separately calculate sha256 for blacklist")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Align to the commit bf4afc53b7 ("Convert 'alloc_obj' family to use the
new default GFP_KERNEL argument") update the 'kmalloc_obj' declaration
for userspace to fix below compile error:
In file included from arch/arm/boot/compressed/../../../../lib/decompress_unxz.c:241,
from arch/arm/boot/compressed/decompress.c:56:
arch/arm/boot/compressed/../../../../lib/xz/xz_dec_stream.c: In function 'xz_dec_init':
arch/arm/boot/compressed/../../../../lib/xz/xz_dec_stream.c:787:28: error: implicit declaration of function 'kmalloc_obj'; did you mean 'kmalloc'? [-Wimplicit-function-declaration]
787 | struct xz_dec *s = kmalloc_obj(*s);
| ^~~~~~~~~~~
| kmalloc
Signed-off-by: Haiyue Wang <haiyuewa@163.com>
Fixes: 69050f8d6d ("treewide: Replace kmalloc with kmalloc_obj for non-scalar types")
Fixes: bf4afc53b7 ("Convert 'alloc_obj' family to use the new default GFP_KERNEL argument")
Reviewed-by: Kees Cook <kees@kernel.org>
Acked-by: Lasse Collin <lasse.collin@tukaani.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Toolchain and infrastructure:
- Pass '-Zunstable-options' flag required by the future Rust 1.95.0.
- Fix 'objtool' warning for Rust 1.84.0.
'kernel' crate:
- 'irq' module: add missing bound detected by the future Rust 1.95.0.
- 'list' module: add missing 'unsafe' blocks and placeholder safety
comments to macros (an issue for future callers within the crate).
'pin-init' crate:
- Clean Clippy warning that changed behavior in the future Rust 1.95.0.
-----BEGIN PGP SIGNATURE-----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=DOG1
-----END PGP SIGNATURE-----
Merge tag 'rust-fixes-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux
Pull rust fixes from Miguel Ojeda:
"Toolchain and infrastructure:
- Pass '-Zunstable-options' flag required by the future Rust 1.95.0
- Fix 'objtool' warning for Rust 1.84.0
'kernel' crate:
- 'irq' module: add missing bound detected by the future Rust 1.95.0
- 'list' module: add missing 'unsafe' blocks and placeholder safety
comments to macros (an issue for future callers within the crate)
'pin-init' crate:
- Clean Clippy warning that changed behavior in the future Rust
1.95.0"
* tag 'rust-fixes-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux:
rust: list: Add unsafe blocks for container_of and safety comments
rust: pin-init: replace clippy `expect` with `allow`
rust: irq: add `'static` bounds to irq callbacks
objtool/rust: add one more `noreturn` Rust function
rust: kbuild: pass `-Zunstable-options` for Rust 1.95.0
Summary of changes:
- Fix multiple definition of __pcpu_unique_da_mon_this
After refactoring monitors, we used static per-cpu variables with the
same names across different per-cpu monitors. This is explicitly
disallowed for modules on some architectures (alpha) or if
CONFIG_DEBUG_FORCE_WEAK_PER_CPU is enabled (e.g. Fedora's debug
kernel). Make sure all those variables have different names to avoid
compilation issues.
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaZoJ1BQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qkykAP41lj9VAe0dM81f20IfOBhqIBZPS6MP
ajRGZ9bz1ZiJwwD/dHm+APheD7umImzoDXpW1IJxgNPlZTnpte3WyhIYaQs=
=HxRz
-----END PGP SIGNATURE-----
Merge tag 'trace-rv-7.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull runtime verifier fix from Steven Rostedt:
- Fix multiple definition of __pcpu_unique_da_mon_this
After refactoring monitors, we used static per-cpu variables with the
same names across different per-cpu monitors. This is explicitly
disallowed for modules on some architectures (alpha) or if
CONFIG_DEBUG_FORCE_WEAK_PER_CPU is enabled (e.g. Fedora's debug
kernel). Make sure all those variables have different names to avoid
compilation issues.
* tag 'trace-rv-7.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
rv: Fix multiple definition of __pcpu_unique_da_mon_this
This converts some of the visually simpler cases that have been split
over multiple lines. I only did the ones that are easy to verify the
resulting diff by having just that final GFP_KERNEL argument on the next
line.
Somebody should probably do a proper coccinelle script for this, but for
me the trivial script actually resulted in an assertion failure in the
middle of the script. I probably had made it a bit _too_ trivial.
So after fighting that far a while I decided to just do some of the
syntactically simpler cases with variations of the previous 'sed'
scripts.
The more syntactically complex multi-line cases would mostly really want
whitespace cleanup anyway.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the exact same thing as the 'alloc_obj()' version, only much
smaller because there are a lot fewer users of the *alloc_flex()
interface.
As with alloc_obj() version, this was done entirely with mindless brute
force, using the same script, except using 'flex' in the pattern rather
than 'objs*'.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Most simple allocations use GFP_KERNEL, and with the new allocation
helpers being introduced, let's just take advantage of that to simplify
that default case.
It's a numbers game:
git grep 'alloc_obj(' |
sed 's/.*\(GFP_[_A-Z]*\).*/\1/' |
sort | uniq -c | sort -n | tail
shows that about 90% of all those new allocator instances just use that
standard GFP_KERNEL.
Those helpers are already macros, and we can easily just make it be the
default case when the gfp argument is missing.
And yes, we could do that for all the legacy interfaces too, but let's
keep it to just the new ones at least for now, since those all got
converted recently anyway, so this is not any "extra" noise outside of
that limited conversion.
And, in fact, I want to do this before doing the -rc1 release, exactly
so that we don't get extra merge conflicts.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 69050f8d6d ("treewide: Replace kmalloc with kmalloc_obj for
non-scalar types") started using the new allocation helpers, and in the
process showed that they were completely non-working.
The overflow logic in overflows_flex_counter_type() is completely the
wrong way around, and that broke __alloc_flex() completely. By chance,
the resulting code was then such a mess that clang generated
sufficiently garbage code that objtool warned about it all. Which made
it somewhat quicker to narrow things down.
While fixing overflows_flex_counter_type() would presumably fix this
all, I'm excising the whole broken overflow logic from __alloc_flex(),
because we don't want that kind of code in basic allocation functions
anyway.
That (no longer) broken overflows_flex_counter_type() thing needs to be
inserted into the actual __set_flex_counter() logic in the unlikely case
that we ever want this at all. And made conditional.
Fixes: 81cee9166a ("compiler_types: Introduce __flex_counter() and family")
Fixes: 69050f8d6d ("treewide: Replace kmalloc with kmalloc_obj for non-scalar types")
Cc: Kees Cook <kees@kernel.org>
Link: https://lore.kernel.org/all/CAHk-=whEd020BYzGTzYrENjD9Z5_82xx6h8HsQvH5xDSnv0=Hw@mail.gmail.com/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRSPkdeREjth1dHnSE2KwveOeQkuwUCaZl14wAKCRA2KwveOeQk
uz8aAQCBFLYlij3Y3ivVADkBxuVF3xECaznFya41ENYsBwlHdwEArXqMyNrw+DiG
TvWCK/tiddNmGIRpI2sxBFzyRpsHfAY=
=rVD3
-----END PGP SIGNATURE-----
Merge tag 'kmalloc_obj-treewide-v7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull kmalloc_obj conversion from Kees Cook:
"This does the tree-wide conversion to kmalloc_obj() and friends using
coccinelle, with a subsequent small manual cleanup of whitespace
alignment that coccinelle does not handle.
This uncovered a clang bug in __builtin_counted_by_ref(), so the
conversion is preceded by disabling that for current versions of
clang. The imminent clang 22.1 release has the fix.
I've done allmodconfig build tests for x86_64, arm64, i386, and arm. I
did defconfig builds for alpha, m68k, mips, parisc, powerpc, riscv,
s390, sparc, sh, arc, csky, xtensa, hexagon, and openrisc"
* tag 'kmalloc_obj-treewide-v7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
kmalloc_obj: Clean up after treewide replacements
treewide: Replace kmalloc with kmalloc_obj for non-scalar types
compiler_types: Disable __builtin_counted_by_ref for Clang
- Introduce 'perf sched stats' tool with record/report/diff workflows
using schedstat counters.
- Add a faster libdw based addr2line implementation and allow selecting
it or its alternatives via 'perf config addr2line.style='.
- Data-type profiling fixes and improvements including the ability
to select fields using 'perf report''s -F/-fields, e.g.:
'perf report --fields overhead,type'
- Add 'perf test' regression tests for Data-type profiling with
C and Rust workloads.
- Fix srcline printing with inlines in callchains, make sure this has
coverage in 'perf test'.
- Fix printing of leaf IP in LBR callchains.
- Fix display of metrics without sufficient permission in 'perf stat'.
- Print all machines in 'perf kvm report -vvv', not just the host.
- Switch from SHA-1 to BLAKE2s for build ID generation, remove SHA-1
code.
- Fix 'perf report's histogram entry collapsing with '-F' option.
- Use system's cacheline size instead of a hardcoded value in 'perf
report'.
- Allow filtering conversion by time range in 'perf data'.
- Cover conversion to CTF using 'perf data' in 'perf test'.
- Address newer glibc const-correctness (-Werror=discarded-qualifiers)
issues.
- Fixes and improvements for ARM's CoreSight support, simplify ARM SPE
event config in 'perf mem', update docs for 'perf c2c' including the
ARM events it can be used with.
- Build support for generating metrics from arch specific python script,
add extra AMD, Intel, ARM64 metrics using it.
- Add AMD Zen 6 events and metrics.
- Add JSON file with OpenHW Risc-V CVA6 hardware counters.
- Add 'perf kvm' stats live testing.
- Add more 'perf stat' tests to 'perf test'.
- Fix segfault in `perf lock contention -b/--use-bpf`
- Fix various 'perf test' cases for s390.
- Build system cleanups, bump minimum shellcheck version to 0.7.2
- Support building the capstone based annotation routines as a plugin.
- Allow passing extra Clang flags via EXTRA_BPF_FLAGS.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCaZn25QAKCRCyPKLppCJ+
J9MbAQCTKChBwDsqVh5iPr0UAc+mez9LOPJFa580SYH9nmd1jgD+Oqip7xCf514G
ZtYPNh+Mz0se0Mcb++syLUEjxvbrQQY=
=y2VY
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-for-v7.0-1-2026-02-21' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools updates from Arnaldo Carvalho de Melo:
- Introduce 'perf sched stats' tool with record/report/diff workflows
using schedstat counters
- Add a faster libdw based addr2line implementation and allow selecting
it or its alternatives via 'perf config addr2line.style='
- Data-type profiling fixes and improvements including the ability to
select fields using 'perf report''s -F/-fields, e.g.:
'perf report --fields overhead,type'
- Add 'perf test' regression tests for Data-type profiling with C and
Rust workloads
- Fix srcline printing with inlines in callchains, make sure this has
coverage in 'perf test'
- Fix printing of leaf IP in LBR callchains
- Fix display of metrics without sufficient permission in 'perf stat'
- Print all machines in 'perf kvm report -vvv', not just the host
- Switch from SHA-1 to BLAKE2s for build ID generation, remove SHA-1
code
- Fix 'perf report's histogram entry collapsing with '-F' option
- Use system's cacheline size instead of a hardcoded value in 'perf
report'
- Allow filtering conversion by time range in 'perf data'
- Cover conversion to CTF using 'perf data' in 'perf test'
- Address newer glibc const-correctness (-Werror=discarded-qualifiers)
issues
- Fixes and improvements for ARM's CoreSight support, simplify ARM SPE
event config in 'perf mem', update docs for 'perf c2c' including the
ARM events it can be used with
- Build support for generating metrics from arch specific python
script, add extra AMD, Intel, ARM64 metrics using it
- Add AMD Zen 6 events and metrics
- Add JSON file with OpenHW Risc-V CVA6 hardware counters
- Add 'perf kvm' stats live testing
- Add more 'perf stat' tests to 'perf test'
- Fix segfault in `perf lock contention -b/--use-bpf`
- Fix various 'perf test' cases for s390
- Build system cleanups, bump minimum shellcheck version to 0.7.2
- Support building the capstone based annotation routines as a plugin
- Allow passing extra Clang flags via EXTRA_BPF_FLAGS
* tag 'perf-tools-for-v7.0-1-2026-02-21' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (255 commits)
perf test script: Add python script testing support
perf test script: Add perl script testing support
perf script: Allow the generated script to be a path
perf test: perf data --to-ctf testing
perf test: Test pipe mode with data conversion --to-json
perf json: Pipe mode --to-ctf support
perf json: Pipe mode --to-json support
perf check: Add libbabeltrace to the listed features
perf build: Allow passing extra Clang flags via EXTRA_BPF_FLAGS
perf test data_type_profiling.sh: Skip just the Rust tests if code_with_type workload is missing
tools build: Fix feature test for rust compiler
perf libunwind: Fix calls to thread__e_machine()
perf stat: Add no-affinity flag
perf evlist: Reduce affinity use and move into iterator, fix no affinity
perf evlist: Missing TPEBS close in evlist__close()
perf evlist: Special map propagation for tool events that read on 1 CPU
perf stat-shadow: In prepare_metric fix guard on reading NULL perf_stat_evsel
Revert "perf tool_pmu: More accurately set the cpus for tool events"
tools build: Emit dependencies file for test-rust.bin
tools build: Make test-rust.bin be removed by the 'clean' target
...
This patch series, from Benjamin Philip <benjamin.philip495@gmail.com>,
simplifies and clarifies the handling of output generated by Coccinelle
that is sent to standard error. By default, this information goes to
/dev/null. The patch series reminds the user of that and encourages
them to provide another file name.
Signed-off-by: Julia Lawall <julia.lawall@inria.fr>
-----BEGIN PGP SIGNATURE-----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=+f+s
-----END PGP SIGNATURE-----
Merge tag 'cocci-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux
Pull coccinelle updates from Julia Lawall:
"This simplifies and clarifies the handling of output generated by
Coccinelle that is sent to standard error.
By default, this goes to /dev/null. Remind the user of that and
encourage them to provide another file name (Benjamin Philip)"
* tag 'cocci-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux:
Documentation: Coccinelle: document debug log handling
scripts: coccicheck: warn on unset debug file
scripts: coccicheck: simplify debug file handling
cleanups, and new hardware support. ntb_transport QP stats are
converted to seq_file, a tx_memcpy_offload module parameter is
introduced with associated ordering fixes, and a debugfs queue
name truncation bug is corrected. Additional fixes address format
specifier mismatches in ntb_tool and boundary conditions in the
Switchtec driver, while unused MSI helpers are removed and the
codebase migrates to dma_map_phys(). Intel Gen6 (Diamond Rapids)
NTB support is also added.
-----BEGIN PGP SIGNATURE-----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=UZw9
-----END PGP SIGNATURE-----
Merge tag 'ntb-7.0' of https://github.com/jonmason/ntb
Pull NTB (PCIe non-transparent bridge) updates from Jon Mason:
"NTB updates include debugfs improvements, correctness fixes, cleanups,
and new hardware support:
ntb_transport QP stats are converted to seq_file, a tx_memcpy_offload
module parameter is introduced with associated ordering fixes, and a
debugfs queue name truncation bug is corrected.
Additional fixes address format specifier mismatches in ntb_tool and
boundary conditions in the Switchtec driver, while unused MSI helpers
are removed and the codebase migrates to dma_map_phys().
Intel Gen6 (Diamond Rapids) NTB support is also added"
* tag 'ntb-7.0' of https://github.com/jonmason/ntb:
NTB: ntb_transport: Use seq_file for QP stats debugfs
NTB: ntb_transport: Fix too small buffer for debugfs_name
ntb/ntb_tool: correct sscanf format for u64 and size_t in tool_peer_mw_trans_write
ntb: intel: Add Intel Gen6 NTB support for DiamondRapids
NTB/msi: Remove unused functions
ntb: ntb_hw_switchtec: Increase MAX_MWS limit to 256
ntb: ntb_hw_switchtec: Fix array-index-out-of-bounds access
ntb: ntb_hw_switchtec: Fix shift-out-of-bounds for 0 mw lut
NTB: epf: allow built-in build
ntb: migrate to dma_map_phys instead of map_page
NTB: ntb_transport: Add 'tx_memcpy_offload' module option
NTB: ntb_transport: Remove unused 'retries' field from ntb_queue_entry
