Add a PSP SOS firmware compatibility check before enabling VCN per-queue
reset on vcn_v4_0_3.
Per review, program check is sufficient: when PSP SOS program is 0x01,
require fw version >= 0x0036015f; otherwise allow per-queue reset.
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Suggested-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Jesse Zhang <Jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Extend the VCN reset capability to include pgm=4 variants when the
firmware version meets the required threshold (>= 0x04557100). This
follows the existing pattern for pgm=0 and pgm=7, ensuring that VCN
reset is enabled only on configurations where it is supported by the
firmware.
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amdgpu_acpi_get_tmr_info() returns the full TMR region size, not the IP
discovery table size. Using tmr_size as discovery.size can lead to oversized
allocations and probe failure.
In the ACPI fallback path, keep discovery.size as DISCOVERY_TMR_SIZE and only
use ACPI data for offset calculation.
Fixes: 01bdc7e219 ("drm/amdgpu: New interface to get IP discovery binary v3")
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Suggested-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add dedicated SMU Dram MSG mapping to avoid conflicts
in SMU IP v15 common code for upcoming ASICs.
add new smu msg:
- SMU_MSG_SetDriverDramAddr
- SMU_MSG_SetToolsDramAddr
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Forcibly disable the OD_FAN_CURVE feature when temperature or PWM range is invalid,
otherwise PMFW will reject this configuration on smu v14.0.2/14.0.3.
example:
$ sudo cat /sys/bus/pci/devices/<BDF>/gpu_od/fan_ctrl/fan_curve
OD_FAN_CURVE:
0: 0C 0%
1: 0C 0%
2: 0C 0%
3: 0C 0%
4: 0C 0%
OD_RANGE:
FAN_CURVE(hotspot temp): 0C 0C
FAN_CURVE(fan speed): 0% 0%
$ echo "0 50 40" | sudo tee fan_curve
kernel log:
[ 969.761627] amdgpu 0000:03:00.0: amdgpu: Fan curve temp setting(50) must be within [0, 0]!
[ 1010.897800] amdgpu 0000:03:00.0: amdgpu: Fan curve temp setting(50) must be within [0, 0]!
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In kfd_ioctl_create_process(), the pointer 'p' is used before checking
if it is NULL.
The code accesses p->context_id before validating 'p'. This can lead
to a possible NULL pointer dereference.
Move the NULL check before using 'p' so that the pointer is validated
before access.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_chardev.c:3177 kfd_ioctl_create_process() warn: variable dereferenced before check 'p' (see line 3174)
Fixes: cc6b66d661 ("amdkfd: introduce new ioctl AMDKFD_IOC_CREATE_PROCESS")
Cc: Zhu Lingshan <lingshan.zhu@amd.com>
Cc: Felix Kuehling <felix.kuehling@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
LVDS connectors don't have extended backlight caps so check
if the pointer is valid before accessing it.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/5012
Fixes: 1454642960 ("drm/amd: Re-introduce property to control adaptive backlight modulation")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amdgpu_amdkfd_submit_ib() submits a GPU job and gets a fence
from amdgpu_ib_schedule(). This fence is used to wait for job
completion.
Currently, the code drops the fence reference using dma_fence_put()
before calling dma_fence_wait().
If dma_fence_put() releases the last reference, the fence may be
freed before dma_fence_wait() is called. This can lead to a
use-after-free.
Fix this by waiting on the fence first and releasing the reference
only after dma_fence_wait() completes.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.c:697 amdgpu_amdkfd_submit_ib() warn: passing freed memory 'f' (line 696)
Fixes: 9ae55f030d ("drm/amdgpu: Follow up change to previous drm scheduler change.")
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Forcibly disable the OD_FAN_CURVE feature when temperature or PWM range is invalid,
otherwise PMFW will reject this configuration on smu v13.0.x
example:
$ sudo cat /sys/bus/pci/devices/<BDF>/gpu_od/fan_ctrl/fan_curve
OD_FAN_CURVE:
0: 0C 0%
1: 0C 0%
2: 0C 0%
3: 0C 0%
4: 0C 0%
OD_RANGE:
FAN_CURVE(hotspot temp): 0C 0C
FAN_CURVE(fan speed): 0% 0%
$ echo "0 50 40" | sudo tee fan_curve
kernel log:
[ 756.442527] amdgpu 0000:03:00.0: amdgpu: Fan curve temp setting(50) must be within [0, 0]!
[ 777.345800] amdgpu 0000:03:00.0: amdgpu: Fan curve temp setting(50) must be within [0, 0]!
Closes: https://github.com/ROCm/amdgpu/issues/208
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of a dynamic allocation, use stack variable and let the caller
pass the maximum ranges that can be held in the buffer.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rename the enum 'pixel_format' to 'dc_pixel_format' to avoid potential
name conflicts with the pixel_format struct defined in
include/video/pixel_format.h.
Signed-off-by: Hou Wenlong <houwenlong.hwl@antgroup.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable user specified gfx clock ranges for smu_15_0_8
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add node power management support for smu_v15_0_8
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add baseboard temperature metrics support via system metrics table for
smu_v15_0_8
v4: Add separate function to fill baseboard temperature, use 16, remove
casting
v5: Optimize to use single switch case (Lijo)
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add gpuboard temperature metrics support via system metrics table for
smu_v15_0_8
v3: Use per sensor attr id (Lijo)
v4: Use s16 for temp, remove cast, use separate function to fill
gpuboard temperature metrics data (Lijo)
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add read sensor support for smu_v15_0_8
v2: Remove gfx voltage support (Lijo)
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add ppt1 support for smu_v15_0_8
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add get_thermal_temperature_range support smu_v15_0_8
v2: Remove sriov check (Lijo)
v3: Restrict to 1VF mode(Lijo)
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add od_edit_dpm_table support for smu_v15_0_8
v2: Skip Gl2clk/Fclk (Lijo)
v3: sqaush in set_performance_support (Asad)
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add populate_umd_state_clk support for smu 15.0.8
v2: remove gl2clk/socclk/fclk, restrict to only current min/max (Lijo)
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
dcn42_init_hw() calls update_bw_bounding_box() when FAMS2 is disabled or
when the dchub reference clock changes. However the existing condition
mixes the callback pointer check with only one side of the || expression:
((!fams2_enable && update_bw_bounding_box) || freq_changed)
This allows the block to be entered through the freq_changed path even
when update_bw_bounding_box() is NULL. The function is then called
unconditionally inside the block, which can lead to a NULL pointer
dereference.
Additionally, the code dereferences dc->clk_mgr->bw_params without
verifying that dc->clk_mgr and bw_params are valid.
Restructure the condition so that the update trigger remains the same
(FAMS2 disabled or dchub ref clock changed), but guard the call with
explicit checks for:
- update_bw_bounding_box callback
- dc->clk_mgr
- dc->clk_mgr->bw_params
Also introduce a helper boolean (dchub_ref_freq_changed) to improve
readability of the clock-change condition.
This fixes Smatch warnings about inconsistent NULL assumptions in
dcn42_init_hw().
drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn42/dcn42_hwseq.c:264 dcn42_init_hw() error: we previously assumed 'dc->clk_mgr' could be null (see line 253)
drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn42/dcn42_hwseq.c:278 dcn42_init_hw() error: we previously assumed 'dc->res_pool->funcs->update_bw_bounding_box' could be null (see line 274)
Cc: Roman Li <roman.li@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Jerry Zuo <jerry.zuo@amd.com>
Cc: Sun peng Li <sunpeng.li@amd.com>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
dcn32_init_hw() checks dc->clk_mgr before calling init_clocks(), so the
clock manager is not treated as unconditionally present on this path.
However, dcn32_initialize_min_clocks() later dereferences dc->clk_mgr,
bw_params, and clk_mgr callbacks without validating them.
Add the required guards in dcn32_initialize_min_clocks() before
accessing clk_mgr-dependent state, and check callback presence before
calling get_dispclk_from_dentist() and update_clocks().
Also guard the later update_bw_bounding_box() call in the FAMS2-disabled
path since it also dereferences dc->clk_mgr->bw_params.
This keeps clk_mgr handling consistent in the DCN32 HW init flow and
avoids possible NULL pointer dereferences reported by Smatch.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn32/dcn32_hwseq.c:1012 dcn32_init_hw() error: we previously assumed 'dc->clk_mgr' could be null (see line 978)
Cc: Roman Li <roman.li@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Jerry Zuo <jerry.zuo@amd.com>
Cc: Sun peng Li <sunpeng.li@amd.com>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add emit clock support and fetching other metrics data like temperature,
clock for smu_v15_0_8
v2: Use umc count for hbm stack temperature (Lijo)
v3: Use correct logic for hbm stacks (Lijo)
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
export .set_power_limit & .get_power_limit interface for smu 15.0.8
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
export .get_unique_id interface for smu 15.0.8
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
export .get_gpu_metrics interface for 15.0.8
v2: Remove members already exposed by other interfaces, use mask,
logical conversion (Lijo)
v3: Use correct logic for hbm stacks loop (Lijo)
Remove buffer allocation
v4: Make out of bound check outside loop (Lijo)
v5: fix locking in error case (Alex)
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
export .get_pm_metrics interface for smu 15.0.8.
v2: Make tmo as unsigned (Lijo)
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update dpm table structs to use common definitions for smu_15_0
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Setup driver pptable and initialize data from static metrics table for
smu_v15_0_8
v2: Remove unrelated changes and update description (Lijo)
v3: Use ARRAY_SIZE (Lijo)
v4: Move structure to header file
v5: squash in static metrics support (Asad)
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add initial mode2 support for smu_v15_0_8
v2: Move out non smu code, remove pci save/restore logic (Lijo)
v3: squash in updated msg (Alex)
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
smu v15_0_8 is the new generation of smu ip block
v2: Squash in rebase changes (Alex)
v3: Squash in fw version check changes (Alex)
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amdgpu_userq_put/get are not needed in case we already holding
the userq_mutex and reference is valid already from queue create
time or from signal ioctl. These additional get/put could be a
potential reason for deadlock in case the ref count reaches zero
and destroy is called which again try to take the userq_mutex.
Due to the above change we avoid deadlock between suspend/restore
calling destroy queues trying to take userq_mutex again.
Cc: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add custom fclk setting support for smu_v13_x_x
v2: Move uclk fix to separate patch, return EOPNOTSUPP in case of dpm
disabled (Lijo)
v3: remove dpm check for filling fclk pstate table (Lijo)
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When SET_UCLK_MAX capability is absent, return -EOPNOTSUPP from
smu_v13_0_6_emit_clk_levels() for OD_MCLK instead of 0. This makes
unsupported OD_MCLK reporting consistent with other clock types
and allows callers to skip the entry cleanly.
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Only reapply UCLK soft limits during PP_OD_RESTORE_DEFAULT when the
current max differs from the DPM table max. This avoids redundant
SMC updates and prevents -EINVAL on restore when no change is needed.
Fixes: b7a9003445 ("drm/amd/pm: Allow setting max UCLK on SMU v13.0.6")
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
- Rework YCbCr422 DSC policy
- Restore full update for tiling change to linear
- add dccg FGCG mask init
- Remove unnecessary completion flag for secure display
- Agument live + capture with CVT case.
- remove dc_clock_limit for apu
- Fix Signed/Unsigned Int Usage Compiler Warning
- Hardcode dtbclk value in bw_params
- Revert inbox0 lock for cursor due to deadlock
- Add 3DLUT DMA broadcast support
- Fix Silence warnings
- export get_power_profile interface for later use
- pg cntl update based on previous asic.
- remove disable_sutter touch pstate debug code
- Refactor DC update checks
- Fix drm_edid leak in amdgpu_dm
- Add Extra SMU Log for dtbclk
- Clamp min DS DCFCLK value to DCN limit
- Update dpia supported configuration
- Multiple DCN42 updates
Acked-by: ChiaHsuan Chung <ChiaHsuan.Chung@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Signed-off-by: Chuanyu Tseng <chuanyu.tseng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Reworked YCbCr4:2:2 Native/Simple policy decision making with DSC
enabled based on DSC caps and stream signal type
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Relja Vojvodic <Relja.Vojvodic@amd.com>
Signed-off-by: Chuanyu Tseng <chuanyu.tseng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
There was previously a dc debug flag to indicate that tiling
changes should only be a medium update instead of full. The
function get_plane_info_type was refactored to not rely on dc
state, but in the process the logic was unintentionally changed,
which leads to screen corruption in some cases.
[How]
- add flag to tiling struct to avoid full update when necessary
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Signed-off-by: Chuanyu Tseng <chuanyu.tseng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The completion flag is not used in secure display today.
Remove unnecessary code.
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Chuanyu Tseng <chuanyu.tseng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1. Add LIVE_CAPTURE_WITH_CVT bit (bit[2]) in union replay_optimization
to control this feature via DalRegKey_ReplayOptimization.
2. Check the bit in mod_power_set_live_capture_with_cvt_activate function
before enabling live capture with CVT.
3. Use LIVE_CAPTURE_WITH_CVT to control if Replay want to send CVT in
live + capture or not.
Reviewed-by: Leon Huang <leon.huang1@amd.com>
Signed-off-by: ChunTao Tso <chuntao.tso@amd.com>
Signed-off-by: Chuanyu Tseng <chuanyu.tseng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
current apu pmfw does not support dc_clock_limit
Reviewed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Chuanyu Tseng <chuanyu.tseng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why] Compiler generates compiler warnings when signed enum
constants or literal -1 are implicitly converted to unsigned
integer types, cluttering build output and masking genuine issues.
[How] Use UINT_MAX as the invalid sentinel for unsigned IDs and align
loop/index types to unsigned where appropriate to remove implicit
signed-to-unsigned conversions, with no functional behavior change.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Gaghik Khachatrian <gaghik.khachatrian@amd.com>
Signed-off-by: Chuanyu Tseng <chuanyu.tseng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why&how]
dtbclk should always be 600MHz. Previous logic was to get the real value
from SMU, but this returns 0 when dtbclk is off. Not a problem during
boot when pre-OS enables dtbclk, but PnP was broken due to this.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Matthew Stewart <Matthew.Stewart2@amd.com>
Signed-off-by: Chuanyu Tseng <chuanyu.tseng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
The DPM clocks on DCN42 are currently read on every dm_resume, which can
cause in gpu memory freeing while the device is still in suspend.
Move the DPM clock read functionality to clk_mgr_construct() so it
completes once on driver enablement.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Signed-off-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com>
Signed-off-by: Chuanyu Tseng <chuanyu.tseng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
A deadlock occurs when using inbox0 lock for cursor operations on
PSR-SU and Replays that does not when using the inbox1 locking path.
This is because of a priority inversion issue where inbox1 work
cannot be serviced while holding the HW lock from driver and sending
cursor notifications to DMUB.
Typically the lower priority of inbox1 for the lock command would
allow the PSR and Replay FSMs to complete their transition prior
to giving driver the lock but this is no longer the case with inbox0
having the highest priority in servicing.
[How]
This will reintroduce any synchronization bugs that were there
with Replay or PSR-SU touching the cursor at the same time as driver.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Chuanyu Tseng <chuanyu.tseng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
