[ Upstream commit 16cb6b0509 ]
Like in UNICODE mode, SMB1 Session Setup Kerberos Request contains oslm and
domain strings.
Extract common code into ascii_oslm_strings() and ascii_domain_string()
functions (similar to unicode variants) and use these functions in
non-UNICODE code path in sess_auth_kerberos().
Decision if non-UNICODE or UNICODE mode is used is based on the
SMBFLG2_UNICODE flag in Flags2 packed field, and not based on the
capabilities of server. Fix this check too.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 70289ae5ca ]
Do not leak the tgtport reference when the work is already scheduled.
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b0b26ad0e1 ]
The reference counting code can be simplified. Instead taking a tgtport
refrerence at the beginning of nvmet_fc_alloc_hostport and put it back
if not a new hostport object is allocated, only take it when a new
hostport object is allocated.
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 27ce8299bc ]
User->user Spectre v2 attacks (including RSB) across context switches
are already mitigated by IBPB in cond_mitigation(), if enabled globally
or if either the prev or the next task has opted in to protection. RSB
filling without IBPB serves no purpose for protecting user space, as
indirect branches are still vulnerable.
User->kernel RSB attacks are mitigated by eIBRS. In which case the RSB
filling on context switch isn't needed, so remove it.
Suggested-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Reviewed-by: Amit Shah <amit.shah@amd.com>
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Link: https://lore.kernel.org/r/98cdefe42180358efebf78e3b80752850c7a3e1b.1744148254.git.jpoimboe@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 18bae0dfec ]
eIBRS protects against guest->host RSB underflow/poisoning attacks.
Adding retpoline to the mix doesn't change that. Retpoline has a
balanced CALL/RET anyway.
So the current full RSB filling on VMEXIT with eIBRS+retpoline is
overkill. Disable it or do the VMEXIT_LITE mitigation if needed.
Suggested-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Reviewed-by: Amit Shah <amit.shah@amd.com>
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Link: https://lore.kernel.org/r/84a1226e5c9e2698eae1b5ade861f1b8bf3677dc.1744148254.git.jpoimboe@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fc9fd3f984 ]
write_ibpb() does IBPB, which (among other things) flushes branch type
predictions on AMD. If the CPU has SRSO_NO, or if the SRSO mitigation
has been disabled, branch type flushing isn't needed, in which case the
lighter-weight SBPB can be used.
The 'x86_pred_cmd' variable already keeps track of whether IBPB or SBPB
should be used. Use that instead of hardcoding IBPB.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/17c5dcd14b29199b75199d67ff7758de9d9a4928.1744148254.git.jpoimboe@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 197c1eaa7b ]
When running the mincore_selftest on a system with an XFS file system, it
failed the "check_file_mmap" test case due to the read-ahead pages reaching
the end of the file. The failure log is as below:
RUN global.check_file_mmap ...
mincore_selftest.c:264:check_file_mmap:Expected i (1024) < vec_size (1024)
mincore_selftest.c:265:check_file_mmap:Read-ahead pages reached the end of the file
check_file_mmap: Test failed
FAIL global.check_file_mmap
This is because the read-ahead window size of the XFS file system on this
machine is 4 MB, which is larger than the size from the #PF address to the
end of the file. As a result, all the pages for this file are populated.
blockdev --getra /dev/nvme0n1p5
8192
blockdev --getbsz /dev/nvme0n1p5
512
This issue can be fixed by extending the current FILE_SIZE 4MB to a larger
number, but it will still fail if the read-ahead window size of the file
system is larger enough. Additionally, in the real world, read-ahead pages
reaching the end of the file can happen and is an expected behavior.
Therefore, allowing read-ahead pages to reach the end of the file is a
better choice for the "check_file_mmap" test case.
Link: https://lore.kernel.org/r/20250311080940.21413-1-qiuxu.zhuo@intel.com
Reported-by: Yi Lai <yi1.lai@intel.com>
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 64a66e2c3b ]
When running as a PVH dom0 the ACPI tables exposed to Linux are (mostly)
the native ones, thus exposing the C and P states, that can lead to
attachment of CPU idle and frequency drivers. However the entity in
control of the CPU C and P states is Xen, as dom0 doesn't have a full view
of the system load, neither has all CPUs assigned and identity pinned.
Like it's done for classic PV guests, prevent Linux from using idle or
frequency state drivers when running as a PVH dom0.
On an AMD EPYC 7543P system without this fix a Linux PVH dom0 will keep the
host CPUs spinning at 100% even when dom0 is completely idle, as it's
attempting to use the acpi_idle driver.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Jason Andryuk <jason.andryuk@amd.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Message-ID: <20250407101842.67228-1-roger.pau@citrix.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b8c7a1ac88 ]
The regulator comment in of_gpio_set_polarity_by_property()
made on top of a couple of the cases, while Atmel HSMCI quirk
is not related to that. Make it clear by moving Atmel HSMCI
quirk up out of the scope of the regulator comment.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250402122058.1517393-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e3105f54a5 ]
The function returns bool so we should return false, not NULL. No
functional changes are expected.
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 62baf70c32 ]
When scanning for new namespaces we might have missed an ANA AEN.
The NVMe base spec (NVMe Base Specification v2.1, Figure 151 'Asynchonous
Event Information - Notice': Asymmetric Namespace Access Change) states:
A controller shall not send this even if an Attached Namespace
Attribute Changed asynchronous event [...] is sent for the same event.
so we need to re-read the ANA log page after we rescanned the namespace
list to update the ANA states of the new namespaces.
Signed-off-by: Hannes Reinecke <hare@kernel.org>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3666ed8218 ]
KIQ invalidate_tlbs request has been seen to marginally exceed the
configured 100 ms timeout on systems under load.
All other KIQ requests in the driver use a 10 second timeout. Use a
similar timeout implementation on the invalidate_tlbs path.
v2: Poll once before msleep
v3: Fix return value
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Cc: Kent Russell <kent.russell@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7ab4f0e37a ]
The end of table checks should be done with the structure size,
but 2 of the 3 similar calls use the pointer size.
Signed-off-by: Jean-Marc Eurin <jmeurin@google.com>
Link: https://patch.msgid.link/20250402001542.2600671-1-jmeurin@google.com
[ rjw: Subject edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b988685388 ]
When AC adapter is unplugged or plugged in EC wakes from HW sleep but
APU doesn't enter back into HW sleep.
The reason this happens is that, when the APU exits HW sleep, the power
rails controlled by the EC will power up the TCON. The TCON has a GPIO
that will be toggled at this time. The GPIO is not marked as a wakeup
source, but the GPIO controller still has an unserviced interrupt.
Unserviced interrupts will block entering HW sleep again. Clearing the
GPIO doesn't help as the TCON continues to assert it until it's been
initialized by i2c-hid.
Fixing this would require TCON F/W changes and it's already broken in
the wild on production hardware.
To avoid triggering this issue add a quirk to avoid letting EC wake
up system at all. The power button still works properly on this system.
Reported-by: Antheas Kapenekakis <lkml@antheas.dev>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3929
Link: 95b93b2852
Co-developed-by: Antheas Kapenekakis <lkml@antheas.dev>
Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/20250401133858.1892077-1-superm1@kernel.org
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9546ad1a9b ]
Scanning for namespaces can take some time, so if the target is
reconfigured while the scan is running we may miss a Attached Namespace
Attribute Changed AEN.
Check if the NVME_AER_NOTICE_NS_CHANGED bit is set once the scan has
finished, and requeue scanning to pick up any missed change.
Signed-off-by: Hannes Reinecke <hare@kernel.org>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0f2946bb17 ]
xen-acpi-processor functions under a PVH dom0 with only a
xen_initial_domain() runtime check. Change the Kconfig dependency from
PV dom0 to generic dom0 to reflect that.
Suggested-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Jason Andryuk <jason.andryuk@amd.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Tested-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Message-ID: <20250331172913.51240-1-jason.andryuk@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0ba3a4ab76 ]
Move the get_ctx(child_ctx) call and the child_event->ctx assignment to
occur immediately after the child event is allocated. Ensure that
child_event->ctx is non-NULL before any subsequent error path within
inherit_event calls free_event(), satisfying the assumptions of the
cleanup code.
Details:
There's no clear Fixes tag, because this bug is a side-effect of
multiple interacting commits over time (up to 15 years old), not
a single regression.
The code initially incremented refcount then assigned context
immediately after the child_event was created. Later, an early
validity check for child_event was added before the
refcount/assignment. Even later, a WARN_ON_ONCE() cleanup check was
added, assuming event->ctx is valid if the pmu_ctx is valid.
The problem is that the WARN_ON_ONCE() could trigger after the initial
check passed but before child_event->ctx was assigned, violating its
precondition. The solution is to assign child_event->ctx right after
its initial validation. This ensures the context exists for any
subsequent checks or cleanup routines, resolving the WARN_ON_ONCE().
To resolve it, defer the refcount update and child_event->ctx assignment
directly after child_event->pmu_ctx is set but before checking if the
parent event is orphaned. The cleanup routine depends on
event->pmu_ctx being non-NULL before it verifies event->ctx is
non-NULL. This also maintains the author's original intent of passing
in child_ctx to find_get_pmu_context before its refcount/assignment.
[ mingo: Expanded the changelog from another email by Gabriel Shahrouzi. ]
Reported-by: syzbot+ff3aa851d46ab82953a3@syzkaller.appspotmail.com
Signed-off-by: Gabriel Shahrouzi <gshahrouzi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Link: https://lore.kernel.org/r/20250405203036.582721-1-gshahrouzi@gmail.com
Closes: https://syzkaller.appspot.com/bug?extid=ff3aa851d46ab82953a3
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 72070e57b0 ]
Commit 57ed58c132 ("selftests: ublk: enable zero copy for stripe target")
added test entry of test_stripe_04, but forgot to add the test script.
So fix the test by adding the script file.
Reported-by: Uday Shankar <ushankar@purestorage.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Uday Shankar <ushankar@purestorage.com>
Link: https://lore.kernel.org/r/20250404001849.1443064-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6da580ec65 ]
Currently, we don't allow the creation of a remote partition underneath
another local or remote partition. However, it is currently possible to
create a new local partition with an existing remote partition underneath
it if top_cpuset is the parent. However, the current cpuset code does
not set the effective exclusive CPUs correctly to account for those
that are taken by the remote partition.
Changing the code to properly account for those remote partition CPUs
under all possible circumstances can be complex. It is much easier to
not allow such a configuration which is not that useful. So forbid
that by making sure that exclusive_cpus mask doesn't overlap with
subpartitions_cpus and invalidate the partition if that happens.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0c7fbae5bc ]
Restricted pointers ("%pK") are only meant to be used when directly
printing to a file from task context.
Otherwise it can unintentionally expose security sensitive,
raw pointer values.
Use regular pointer formatting instead.
Link: https://lore.kernel.org/lkml/20250113171731-dc10e3c1-da64-4af0-b767-7c7070468023@linutronix.de/
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Michael Mueller <mimu@linux.ibm.com>
Tested-by: Michael Mueller <mimu@linux.ibm.com>
Link: https://lore.kernel.org/r/20250217-restricted-pointers-s390-v1-2-0e4ace75d8aa@linutronix.de
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Message-ID: <20250217-restricted-pointers-s390-v1-2-0e4ace75d8aa@linutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 975776841e ]
kernel/sched/isolation.c obviously makes no sense without CONFIG_SMP, but
the Kconfig entry we have right now:
config CPU_ISOLATION
bool "CPU isolation"
depends on SMP || COMPILE_TEST
allows the creation of pointless .config's which cause
build failures.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250330134955.GA7910@redhat.com
Closes: https://lore.kernel.org/oe-kbuild-all/202503260646.lrUqD3j5-lkp@intel.com/
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 82c09de2d4 ]
Without this dependency it's really puzzling when we bisect for a "bad"
commit in a series of sorttable change: when "git bisect" switches to
another commit, "make" just does nothing to vmlinux.
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 390513642e ]
io_uring always switches requests to atomic refcounting for iowq
execution before there is any parallilism by setting REQ_F_REFCOUNT,
and the flag is not cleared until the request completes. That should be
fine as long as the compiler doesn't make up a non existing value for
the flags, however KCSAN still complains when the request owner changes
oter flag bits:
BUG: KCSAN: data-race in io_req_task_cancel / io_wq_free_work
...
read to 0xffff888117207448 of 8 bytes by task 3871 on cpu 0:
req_ref_put_and_test io_uring/refs.h:22 [inline]
Skip REQ_F_REFCOUNT checks for iowq, we know it's set.
Reported-by: syzbot+903a2ad71fb3f1e47cf5@syzkaller.appspotmail.com
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/d880bc27fb8c3209b54641be4ff6ac02b0e5789a.1743679736.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2b7cbd9849 ]
Power-on Reset has a documented issue in PCF85063, refer to its datasheet,
section "Software reset":
"There is a low probability that some devices will have corruption of the
registers after the automatic power-on reset if the device is powered up
with a residual VDD level. It is required that the VDD starts at zero volts
at power up or upon power cycling to ensure that there is no corruption of
the registers. If this is not possible, a reset must be initiated after
power-up (i.e. when power is stable) with the software reset command"
Trigger SW reset if there is an indication that POR has failed.
Link: https://www.nxp.com/docs/en/data-sheet/PCF85063A.pdf
Signed-off-by: Lukas Stockmann <lukas.stockmann@siemens.com>
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Link: https://lore.kernel.org/r/20250120093451.30778-1-alexander.sverdlin@siemens.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fbc0283fbe ]
Writes for the error value of a connection are spinlock-protected inside
p9_conn_cancel, but lockless reads are present elsewhere to avoid
performing unnecessary work after an error has been met.
Mark the write and lockless reads to make KCSAN happy. Mark the write as
exclusive following the recommendation in "Lock-Protected Writes with
Lockless Reads" in tools/memory-model/Documentation/access-marking.txt
while we are at it.
Mark p9_fd_request and p9_conn_cancel m->err reads despite the fact that
they do not race with concurrent writes for stylistic reasons.
Reported-by: syzbot+d69a7cc8c683c2cb7506@syzkaller.appspotmail.com
Reported-by: syzbot+483d6c9b9231ea7e1851@syzkaller.appspotmail.com
Signed-off-by: Ignacio Encinas <ignacio@iencinas.com>
Message-ID: <20250318-p9_conn_err_benign_data_race-v3-1-290bb18335cc@iencinas.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d0259a856a ]
In p9_client_write() and p9_client_read_once(), if the server
incorrectly replies with success but a negative write/read count then we
would consider written (negative) <= rsize (positive) because both
variables were signed.
Make variables unsigned to avoid this problem.
The reproducer linked below now fails with the following error instead
of a null pointer deref:
9pnet: bogus RWRITE count (4294967295 > 3)
Reported-by: Robert Morris <rtm@mit.edu>
Closes: https://lore.kernel.org/16271.1734448631@26-5-164.dynamic.csail.mit.edu
Message-ID: <20250319-9p_unsigned_rw-v3-1-71327f1503d0@codewreck.org>
Reviewed-by: Christian Schoenebeck <linux_oss@crudebyte.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bf8a7ce7e4 ]
Add NTB support for new generation of processor.
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aff12700b8 ]
idt_scan_mws() puts a large fixed-size array on the stack and copies
it into a smaller dynamically allocated array at the end. On 32-bit
targets, the fixed size can easily exceed the warning limit for
possible stack overflow:
drivers/ntb/hw/idt/ntb_hw_idt.c:1041:27: error: stack frame size (1032) exceeds limit (1024) in 'idt_scan_mws' [-Werror,-Wframe-larger-than]
Change it to instead just always use dynamic allocation for the
array from the start. It's too big for the stack, but not actually
all that much for a permanent allocation.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/all/202205111109.PiKTruEj-lkp@intel.com/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bdb43af4fd ]
failure to allocate inode => leaked dentry...
this one had been there since the initial merge; to be fair,
if we are that far OOM, the odds of failing at that particular
allocation are low...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 05026ea01e ]
If execute_location()'s memcpy of do_nothing() gets inlined and unrolled
by the compiler, it copies one word at a time:
mov 0x0(%rip),%rax R_X86_64_PC32 .text+0x1374
mov %rax,0x38(%rbx)
mov 0x0(%rip),%rax R_X86_64_PC32 .text+0x136c
mov %rax,0x30(%rbx)
...
Those .text references point to the middle of the function, causing
objtool to complain about their lack of ENDBR.
Prevent that by resolving the function pointer at runtime rather than
build time. This fixes the following warning:
drivers/misc/lkdtm/lkdtm.o: warning: objtool: execute_location+0x23: relocation to !ENDBR: .text+0x1378
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Kees Cook <kees@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/30b9abffbddeb43c4f6320b1270fa9b4d74c54ed.1742852847.git.jpoimboe@kernel.org
Closes: https://lore.kernel.org/oe-kbuild-all/202503191453.uFfxQy5R-lkp@intel.com/
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 29c578c848 ]
If 'ctr_bit' is negative, the shift counts become negative, causing a
shift of bounds and undefined behavior.
Presumably that's not possible in normal operation, but the code
generation isn't optimal. And undefined behavior should be avoided
regardless.
Improve code generation and remove the undefined behavior by converting
the signed variables to unsigned.
Fixes the following warning with an UBSAN kernel:
vmlinux.o: warning: objtool: rk806_set_mode_dcdc() falls through to next function rk806_get_mode_dcdc()
vmlinux.o: warning: objtool: .text.rk806_set_mode_dcdc: unexpected end of section
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Mark Brown <broonie@kernel.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/2023abcddf3f524ba478d64339996f25dc4097d2.1742852847.git.jpoimboe@kernel.org
Closes: https://lore.kernel.org/oe-kbuild-all/202503182350.52KeHGD4-lkp@intel.com/
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 060aed9c00 ]
If 'port_id' is negative, the shift counts in wcd934x_slim_irq_handler()
also become negative, resulting in undefined behavior due to shift out
of bounds.
If I'm reading the code correctly, that appears to be not possible, but
with KCOV enabled, Clang's range analysis isn't always able to determine
that and generates undefined behavior.
As a result the code generation isn't optimal, and undefined behavior
should be avoided regardless. Improve code generation and remove the
undefined behavior by converting the signed variables to unsigned.
Fixes the following warning with UBSAN:
sound/soc/codecs/snd-soc-wcd934x.o: warning: objtool: .text.wcd934x_slim_irq_handler: unexpected end of section
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Mark Brown <broonie@kernel.org>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/7e863839ec7301bf9c0f429a03873d44e484c31c.1742852847.git.jpoimboe@kernel.org
Closes: https://lore.kernel.org/oe-kbuild-all/202503180044.oH9gyPeg-lkp@intel.com/
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6b023c7842 ]
In the past there were issues with KCOV triggering unreachable
instruction warnings, which is why unreachable warnings are now disabled
with CONFIG_KCOV.
Now some new KCOV warnings are showing up with GCC 14:
vmlinux.o: warning: objtool: cpuset_write_resmask() falls through to next function cpuset_update_active_cpus.cold()
drivers/usb/core/driver.o: error: objtool: usb_deregister() falls through to next function usb_match_device()
sound/soc/codecs/snd-soc-wcd934x.o: warning: objtool: .text.wcd934x_slim_irq_handler: unexpected end of section
All are caused by GCC KCOV not finishing an optimization, leaving behind
a never-taken conditional branch to a basic block which falls through to
the next function (or end of section).
At a high level this is similar to the unreachable warnings mentioned
above, in that KCOV isn't fully removing dead code. Treat it the same
way by adding these to the list of warnings to ignore with CONFIG_KCOV.
Reported-by: Ingo Molnar <mingo@kernel.org>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/66a61a0b65d74e072d3dc02384e395edb2adc3c5.1742852846.git.jpoimboe@kernel.org
Closes: https://lore.kernel.org/Z9iTsI09AEBlxlHC@gmail.com
Closes: https://lore.kernel.org/oe-kbuild-all/202503180044.oH9gyPeg-lkp@intel.com/
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 887c5c12e8 ]
sched_yield by a userspace may not actually cause scheduling in
time-travel mode as no time has passed. In the case seen it appears to
be a badly implemented userspace spinlock in ASAN. Unfortunately, with
time-travel it causes an extreme slowdown or even deadlock depending on
the kernel configuration (CONFIG_UML_MAX_USERSPACE_ITERATIONS).
Work around it by accounting time to the process whenever it executes a
sched_yield syscall.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Link: https://patch.msgid.link/20250314130815.226872-1-benjamin@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 75749d2c1d ]
Thomas reported connection issues on AMD system with Pluggable UD-4VPD
dock. After some experiments it looks like the device has some sort of
internal timeout that triggers reconnect. This is completely against the
USB4 spec, as there is no requirement for the host to enumerate the
device right away or even at all.
In Linux case the delay is caused by scanning of retimers on the link so
we can work this around by doing the scanning after the device router
has been enumerated.
Reported-by: Thomas Lynema <lyz27@yahoo.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219748
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 64eb182d5f ]
Compatible "marvell,armada3700-xhci" match data uses the
struct xhci_plat_priv::init_quirk() function pointer to add
XHCI_RESET_ON_RESUME as quirk on XHCI.
Instead, use the struct xhci_plat_priv::quirks field.
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://lore.kernel.org/r/20250205-s2r-cdns-v7-1-13658a271c3c@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8c75f3e6a4 ]
The variable d->name, returned by devm_kasprintf(), could be NULL.
A pointer check is added to prevent potential NULL pointer dereference.
This is similar to the fix in commit 3027e7b15b
("ice: Fix some null pointer dereference issues in ice_ptp.c").
This issue is found by our static analysis tool
Signed-off-by: Chenyuan Yang <chenyuan0y@gmail.com>
Link: https://lore.kernel.org/r/20250311012705.1233829-1-chenyuan0y@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 28dc672a1a ]
Function rk_udphy_dp_hpd_event_trigger will set vogrf let it
trigger HPD interrupt to DP by Type-C. This configuration is only
required when the DP work in Alternate Mode, and called by
typec_mux_set. In standard DP mode, such settings will prevent
the DP from receiving HPD interrupts.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Link: https://lore.kernel.org/r/20250302115257.188774-1-andyshrk@163.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 28a76fcc4c ]
Nothing prevents a broken HC from claiming that an endpoint is Running
and repeatedly rejecting Stop Endpoint with Context State Error.
Avoid infinite retries and give back cancelled TDs.
No such cases known so far, but HCs have bugs.
Signed-off-by: Michal Pecio <michal.pecio@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250311154551.4035726-4-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e87ca16e99 ]
Change the "wait for operation finish" logic to take interrupts into
account.
When using dmatest with idxd DMA engine, it's possible that during
longer tests, the interrupt notifying the finish of an operation
happens during wait_event_freezable_timeout(), which causes dmatest to
cleanup all the resources, some of which might still be in use.
This fix ensures that the wait logic correctly handles interrupts,
preventing premature cleanup of resources.
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202502171134.8c403348-lkp@intel.com
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20250305230007.590178-1-vinicius.gomes@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 98d87600a0 ]
Nuvoton npcm845 SoC uses an older IP version, which has specific
hardware issues that need to be addressed with a different compatible
string.
Add driver data for different compatible strings to define platform
specific quirks.
Add compatible string for npcm845 to define its own driver data.
Signed-off-by: Stanley Chu <yschu@nuvoton.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250306075429.2265183-3-yschu@nuvoton.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b331a3d809 ]
Unplugging a USB3.0 webcam from Etron hosts while streaming results
in errors like this:
[ 2.646387] xhci_hcd 0000:03:00.0: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 18 comp_code 13
[ 2.646446] xhci_hcd 0000:03:00.0: Looking for event-dma 000000002fdf8630 trb-start 000000002fdf8640 trb-end 000000002fdf8650
[ 2.646560] xhci_hcd 0000:03:00.0: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 18 comp_code 13
[ 2.646568] xhci_hcd 0000:03:00.0: Looking for event-dma 000000002fdf8660 trb-start 000000002fdf8670 trb-end 000000002fdf8670
Etron xHC generates two transfer events for the TRB if an error is
detected while processing the last TRB of an isoc TD.
The first event can be any sort of error (like USB Transaction or
Babble Detected, etc), and the final event is Success.
The xHCI driver will handle the TD after the first event and remove it
from its internal list, and then print an "Transfer event TRB DMA ptr
not part of current TD" error message after the final event.
Commit 5372c65e13 ("xhci: process isoc TD properly when there was a
transaction error mid TD.") is designed to address isoc transaction
errors, but unfortunately it doesn't account for this scenario.
This issue is similar to the XHCI_SPURIOUS_SUCCESS case where a success
event follows a 'short transfer' event, but the TD the event points to
is already given back.
Expand the spurious success 'short transfer' event handling to cover
the spurious success after error on Etron hosts.
Kuangyi Chiang reported this issue and submitted a different solution
based on using error_mid_td. This commit message is mostly taken
from that patch.
Reported-by: Kuangyi Chiang <ki.chiang65@gmail.com>
Closes: https://lore.kernel.org/linux-usb/20241028025337.6372-6-ki.chiang65@gmail.com/
Tested-by: Kuangyi Chiang <ki.chiang65@gmail.com>
Tested-by: Michal Pecio <michal.pecio@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250306144954.3507700-16-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 906dec15b9 ]
The TRB pointer of these events points at enqueue at the time of error
occurrence on xHCI 1.1+ HCs or it's NULL on older ones. By the time we
are handling the event, a new TD may be queued at this ring position.
I can trigger this race by rising interrupt moderation to increase IRQ
handling delay. Similar delay may occur naturally due to system load.
If this ever happens after a Missed Service Error, missed TDs will be
skipped and the new TD processed as if it matched the event. It could
be given back prematurely, risking data loss or buffer UAF by the xHC.
Don't complete TDs on xrun events and don't warn if queued TDs don't
match the event's TRB pointer, which can be NULL or a link/no-op TRB.
Don't warn if there are no queued TDs at all.
Now that it's safe, also handle xrun events if the skip flag is clear.
This ensures completion of any TD stuck in 'error mid TD' state right
before the xrun event, which could happen if a driver submits a finite
number of URBs to a buggy HC and then an error occurs on the last TD.
Signed-off-by: Michal Pecio <michal.pecio@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250306144954.3507700-6-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bfa8459942 ]
Missed Service Error after an error mid TD means that the failed TD has
already been passed by the xHC without acknowledgment of the final TRB,
a known hardware bug. So don't wait any more and give back the TD.
Reproduced on NEC uPD720200 under conditions of ludicrously bad USB link
quality, confirmed to behave as expected using dynamic debug.
Signed-off-by: Michal Pecio <michal.pecio@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250306144954.3507700-5-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3c7df2e273 ]
Betty reported hitting the following warning:
[ 8.709131][ T221] WARNING: CPU: 2 PID: 221 at kernel/workqueue.c:4182
...
[ 8.713282][ T221] Call trace:
[ 8.713365][ T221] __flush_work+0x8d0/0x914
[ 8.713468][ T221] __cancel_work_sync+0xac/0xfc
[ 8.713570][ T221] cancel_work_sync+0x24/0x34
[ 8.713667][ T221] virtsnd_remove+0xa8/0xf8 [virtio_snd ab15f34d0dd772f6d11327e08a81d46dc9c36276]
[ 8.713868][ T221] virtsnd_probe+0x48c/0x664 [virtio_snd ab15f34d0dd772f6d11327e08a81d46dc9c36276]
[ 8.714035][ T221] virtio_dev_probe+0x28c/0x390
[ 8.714139][ T221] really_probe+0x1bc/0x4c8
...
It seems we're hitting the error path in virtsnd_probe(), which
triggers a virtsnd_remove() which iterates over the substreams
calling cancel_work_sync() on the elapsed_period work_struct.
Looking at the code, from earlier in:
virtsnd_probe()->virtsnd_build_devs()->virtsnd_pcm_parse_cfg()
We set snd->nsubstreams, allocate the snd->substreams, and if
we then hit an error on the info allocation or something in
virtsnd_ctl_query_info() fails, we will exit without having
initialized the elapsed_period work_struct.
When that error path unwinds we then call virtsnd_remove()
which as long as the substreams array is allocated, will iterate
through calling cancel_work_sync() on the uninitialized work
struct hitting this warning.
Takashi Iwai suggested this fix, which initializes the substreams
structure right after allocation, so that if we hit the error
paths we avoid trying to cleanup uninitialized data.
Note: I have not yet managed to reproduce the issue myself, so
this patch has had limited testing.
Feedback or thoughts would be appreciated!
Cc: Anton Yakovlev <anton.yakovlev@opensynergy.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: virtualization@lists.linux.dev
Cc: linux-sound@vger.kernel.org
Cc: kernel-team@android.com
Reported-by: Betty Zhou <bettyzhou@google.com>
Suggested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: John Stultz <jstultz@google.com>
Message-Id: <20250116194114.3375616-1-jstultz@google.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 461f24bff8 ]
Intel Merrifield SoC uses these endpoints for tracing and they cannot
be re-allocated if being used because the side band flow control signals
are hard wired to certain endpoints:
• 1 High BW Bulk IN (IN#1) (RTIT)
• 1 1KB BW Bulk IN (IN#8) + 1 1KB BW Bulk OUT (Run Control) (OUT#8)
In device mode, since RTIT (EP#1) and EXI/RunControl (EP#8) uses
External Buffer Control (EBC) mode, these endpoints are to be mapped to
EBC mode (to be done by EXI target driver). Additionally TRB for RTIT
and EXI are maintained in STM (System Trace Module) unit and the EXI
target driver will as well configure the TRB location for EP #1 IN
and EP#8 (IN and OUT). Since STM/PTI and EXI hardware blocks manage
these endpoints and interface to OTG3 controller through EBC interface,
there is no need to enable any events (such as XferComplete etc)
for these end points.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Ferry Toth <fntoth@gmail.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20250212193116.2487289-5-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>