Similar to jpeg_v2_dec_ring_parse_cs() but it has different
register ranges and a few other registers access.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: David (Ming Qiang) Wu <David.Wu3@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 3d5adbdf1d)
Cc: stable@vger.kernel.org
This patch extends the same cs parser from JPEG v4.0.3 to
other JPEG versions (v2 and above).
Rename to more common name as jpeg_v2_dec_ring_parse_cs()
from jpeg_v4_0_3_dec_ring_parse_cs().
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: David (Ming Qiang) Wu <David.Wu3@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 88dcad2d07)
Cc: stable@vger.kernel.org
fix the pp_dpm_pcie issue on smu v14.0.2/3 as below:
0: 2.5GT/s, x4 250Mhz
1: 8.0GT/s, x4 616Mhz *
2: 8.0GT/s, x4 1143Mhz *
the middle level can be removed since it is always skipped on
smu v14.0.2/3
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit fedf6db3ea)
update the features set on smu v14.0.2/3
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 25d48f2eb0)
[Why]
drm_normalize_zpos will set the crtc_state->zpos_changed to 1 if any of
it's assigned planes changes zpos, or is removed/added from it.
To have amdgpu_dm request a plane reset on this is too broad. For
example, if only the cursor plane was moved from one crtc to another,
the crtc's zpos_changed will be set to true. But that does not mean that
the underlying primary plane requires a reset.
[How]
Narrow it down so that only the plane that has a change in zpos will
require a reset.
As a future TODO, we can further optimize this by only requiring a reset
on z-order change. Z-order is different from z-pos, since a zpos change
doesn't necessarily mean the z-ordering changed, and DC should only
require a reset if the z-ordering changed.
For example, the following zpos update does not change z-ordering:
Plane A: zpos 2 -> 3
Plane B: zpos 1 -> 2
=> Plane A is still on top of plane B: no reset needed
Whereas this one does change z-ordering:
Plane A: zpos 2 -> 1
Plane B: zpos 1 -> 2
=> Plane A changed from on top, to below plane B: reset needed
Fixes: 38e0c3df6d ("drm/amd/display: Move PRIMARY plane zpos higher")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3569
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 578aab4ecc)
dc_state_destruct() nulls the resource context of the DC state. The pipe
context passed to dcn35_set_drr() is a member of this resource context.
If dc_state_destruct() is called parallel to the IRQ processing (which
calls dcn35_set_drr() at some point), we can end up using already nulled
function callback fields of struct stream_resource.
The logic in dcn35_set_drr() already tries to avoid this, by checking tg
against NULL. But if the nulling happens exactly after the NULL check and
before the next access, then we get a race.
Avoid this by copying tg first to a local variable, and then use this
variable for all the operations. This should work, as long as nobody
frees the resource pool where the timing generators live.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3142
Fixes: 06ad7e1642 ("drm/amd/display: Destroy DC context while keeping DML and DML2")
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 0607a50c00)
Cc: stable@vger.kernel.org
dc_state_destruct() nulls the resource context of the DC state. The pipe
context passed to dcn10_set_drr() is a member of this resource context.
If dc_state_destruct() is called parallel to the IRQ processing (which
calls dcn10_set_drr() at some point), we can end up using already nulled
function callback fields of struct stream_resource.
The logic in dcn10_set_drr() already tries to avoid this, by checking tg
against NULL. But if the nulling happens exactly after the NULL check and
before the next access, then we get a race.
Avoid this by copying tg first to a local variable, and then use this
variable for all the operations. This should work, as long as nobody
frees the resource pool where the timing generators live.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3142
Fixes: 06ad7e1642 ("drm/amd/display: Destroy DC context while keeping DML and DML2")
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Tested-by: Raoul van Rüschen <raoul.van.rueschen@gmail.com>
Tested-by: Christopher Snowhill <chris@kode54.net>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Tested-by: Sefa Eyeoglu <contact@scrumplex.net>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit a3cc326a43)
Cc: stable@vger.kernel.org
Populate cache line size info in topology based on information from IP
discovery table.
Signed-off-by: David Belanger <david.belanger@amd.com>
Reviewed-by: Sreekant Somasekharan <Sreekant.Somasekharan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 4e9fadacdd)
a memory leak fix for imagination, three fixes for the recent bridge
HDMI work, a potential DoS fix and a cache coherency for panthor, a
change of panel compatible and a deferred-io fix when used with
non-highmem memory.
-----BEGIN PGP SIGNATURE-----
iJUEABMJAB0WIQTkHFbLp4ejekA/qfgnX84Zoj2+dgUCZtm9wgAKCRAnX84Zoj2+
djrnAX913s+RTPRiNY6ym8XQo7jABX8/XxfHK9kbhyWF1aoOmd2kBxp/wP15hAmu
ZSvMyPkBewek4CdFAS0GlkrdTkFXgvRIG415PtHTVwQU2bkdzc/3OzIhBNfkILX1
HGzozDl5ew==
=ui/V
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2024-09-05' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
A zpos normalization fix for komeda, a register bitmask fix for nouveau,
a memory leak fix for imagination, three fixes for the recent bridge
HDMI work, a potential DoS fix and a cache coherency for panthor, a
change of panel compatible and a deferred-io fix when used with
non-highmem memory.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240905-original-radical-guan-e7a2ae@houat
- drm/i915: Do not attempt to load the GSC multiple times (Daniele Ceraolo Spurio)
- drm/i915: Fix readout degamma_lut mismatch on ilk/snb (Ville Syrjälä)
- drm/i915/fence: Mark debug_fence_init_onstack() with __maybe_unused (Andy Shevchenko)
- drm/i915/fence: Mark debug_fence_free() with __maybe_unused (Andy Shevchenko)
- drm/i915/display: Add mechanism to use sink model when applying quirk [display] (Jouni Högander)
- drm/i915/display: Increase Fast Wake Sync length as a quirk [display] (Jouni Högander)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Tvrtko Ursulin <tursulin@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Ztlo2hVO4SBvfAnq@linux
Deferred I/O requires struct page for framebuffer memory, which is
not guaranteed for all DMA ranges. We thus only install deferred I/O
if we have a framebuffer that requires it.
A reported bug affected the ipu-v3 and pl111 drivers, which have video
memory in either Normal or HighMem zones
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x0000000010000000-0x000000003fffffff]
[ 0.000000] HighMem [mem 0x0000000040000000-0x000000004fffffff]
where deferred I/O only works correctly with HighMem. See the Closes
tags for bug reports.
v2:
- test if screen_buffer supports deferred I/O (Sima)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 808a40b694 ("drm/fbdev-dma: Implement damage handling and deferred I/O")
Reported-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Closes: https://lore.kernel.org/all/23636953.6Emhk5qWAg@steina-w/
Reported-by: Linus Walleij <linus.walleij@linaro.org>
Closes: https://lore.kernel.org/dri-devel/CACRpkdb+hb9AGavbWpY-=uQQ0apY9en_tWJioPKf_fAbXMP4Hg@mail.gmail.com/
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240904123750.31206-1-tzimmermann@suse.de
In the off-chance that waiting for the firmware to signal its booted status
timed out in the fast reset path, one must flush the cache lines for the
entire FW VM address space before reloading the regions, otherwise stale
values eventually lead to a scheduler job timeout.
Fixes: 647810ec24 ("drm/panthor: Add the MMU/VM logical block")
Cc: stable@vger.kernel.org
Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240902130237.3440720-1-adrian.larumbe@collabora.com
As per the previous dt-binding commit, update the WL-355608-A8 panel
compatible to reflect the the integrating device vendor and name as the
panel OEM is unknown.
Fixes: 62ea2eeba7 ("drm: panel: nv3052c: Add WL-355608-A8 panel")
Signed-off-by: Ryan Walklin <ryan@testtoast.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240904012456.35429-3-ryan@testtoast.com
The WL-355608-A8 is a 3.5" 640x480@60Hz RGB LCD display from an unknown
OEM used in a number of handheld gaming devices made by Anbernic.
Previously committed using the OEM serial without a vendor prefix,
however following subsequent discussion the preference is to use the
integrating device vendor and name where the OEM is unknown.
There are 4 RG35XX series devices from Anbernic based on an Allwinner
H700 SoC using this panel, with the -Plus variant introduced first.
Therefore the -Plus is used as the fallback for the subsequent -H,
-2024, and -SP devices.
Alter the filename and compatible string to reflect the convention.
Fixes: 45b888a898 ("dt-bindings: display: panel: Add WL-355608-A8 panel")
Signed-off-by: Ryan Walklin <ryan@testtoast.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240904012456.35429-2-ryan@testtoast.com
We were allowing any users to create a high priority group without any
permission checks. As a result, this was allowing possible denial of
service.
We now only allow the DRM master or users with the CAP_SYS_NICE
capability to set higher priorities than PANTHOR_GROUP_PRIORITY_MEDIUM.
As the sole user of that uAPI lives in Mesa and hardcode a value of
MEDIUM [1], this should be safe to do.
Additionally, as those checks are performed at the ioctl level,
panthor_group_create now only check for priority level validity.
[1]f390835074/src/gallium/drivers/panfrost/pan_csf.c (L1038)
Signed-off-by: Mary Guillemard <mary.guillemard@collabora.com>
Fixes: de85488138 ("drm/panthor: Add the scheduler logical block")
Cc: stable@vger.kernel.org
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240903144955.144278-2-mary.guillemard@collabora.com
Fix circular locking dependency on runtime suspend.
<4> [74.952215] ======================================================
<4> [74.952217] WARNING: possible circular locking dependency detected
<4> [74.952219] 6.10.0-rc7-xe #1 Not tainted
<4> [74.952221] ------------------------------------------------------
<4> [74.952223] kworker/7:1/82 is trying to acquire lock:
<4> [74.952226] ffff888120548488 (&dev->mode_config.mutex){+.+.}-{3:3}, at: drm_modeset_lock_all+0x40/0x1e0 [drm]
<4> [74.952260]
but task is already holding lock:
<4> [74.952262] ffffffffa0ae59c0 (xe_pm_runtime_lockdep_map){+.+.}-{0:0}, at: xe_pm_runtime_suspend+0x2f/0x340 [xe]
<4> [74.952322]
which lock already depends on the new lock.
The commit 'b1d90a86 ("drm/xe: Use the encoder suspend helper also used
by the i915 driver")' didn't do anything wrong. It actually fixed a
critical bug, because the encoder_suspend was never getting actually
called because it was returning if (has_display(xe)) instead of
if (!has_display(xe)). However, this ended up introducing the encoder
suspend calls in the runtime routines as well, causing the circular
locking dependency.
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/2304
Fixes: b1d90a862c ("drm/xe: Use the encoder suspend helper also used by the i915 driver")
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240830183507.298351-2-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 8da19441d0)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Enable/Disable user access only during system suspend/resume.
This should not happen during runtime s/r
v2: rebased
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240823112148.327015-2-vinod.govindapillai@intel.com
(cherry picked from commit a64e7e5b05)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Suspend fbdev sooner, and disable user access before suspending to
prevent some races. I've noticed this when comparing xe suspend to
i915's.
Matches the following commits from i915:
24b412b1bf ("drm/i915: Disable intel HPD poll after DRM poll init/enable")
1ef28d86be ("drm/i915: Suspend the framebuffer console earlier during system suspend")
bd738d859e ("drm/i915: Prevent modesets during driver init/shutdown")
Thanks to Imre for pointing me to those commits.
Driver shutdown is currently missing, but I have some idea how to
implement it next.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240806105044.596842-2-maarten.lankhorst@linux.intel.com
Signed-off-by: Maarten Lankhorst,,, <maarten.lankhorst@linux.intel.com>
(cherry picked from commit 492be2a070)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
There's only one instance of the pcode per tile, and for GT-related
accesses both the primary and media GT share the same register
interface. Since Xe was using per-GT locking, the pcode mutex wasn't
actually protecting everything that it should since concurrent accesses
related to a tile's primary GT and media GT were possible.
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240829220619.789159-5-matthew.d.roper@intel.com
(cherry picked from commit 3034cc8107)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The GSC HW is only reset by driver FLR or D3cold entry. We don't support
the former at runtime, while the latter is only supported on DGFX, for
which we don't support GSC. Therefore, if GSC failed to load previously
there is no need to try again because the HW is stuck in the error state.
An assert has been added so that if we ever add DGFX support we'll know
we need to handle the D3 case.
v2: use "< 0" instead of "!= 0" in the FW state error check (Julia).
Fixes: dd0e89e5ed ("drm/xe/gsc: GSC FW load")
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: <stable@vger.kernel.org> # v6.8+
Reviewed-by: Julia Filipchuk <julia.filipchuk@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240828215158.2743994-2-daniele.ceraolospurio@intel.com
(cherry picked from commit 2160f6f6e3)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
On HDMI connectors which use drm_bridge_connector and DRM_BRIDGE_OP_HDMI
IGT chokes on the max_bpc property in several kms_properties tests due
to the drm_bridge_connector failing to reset HDMI-related
properties.
Call __drm_atomic_helper_connector_hdmi_reset() if the
drm_bridge_connector has bridge_hdmi.
It is impossible to call this function from HDMI bridges, none of the
bridge callbacks correspond to the drm_connector_funcs::reset().
Fixes: 6b4468b0c6 ("drm/bridge-connector: implement glue code for HDMI connector")
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240903-drm-bridge-connector-fix-hdmi-reset-v5-3-daebde6d9857@linaro.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
drm_bridge_connector is a "leaf" driver, belonging to the display
helper, rather than the "CRTC" drm_kms_helper module. Move the driver
to the drm/display and add necessary Kconfig selection clauses.
Suggested-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240903-drm-bridge-connector-fix-hdmi-reset-v5-2-daebde6d9857@linaro.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Kconfig symbols should not declare dependency on DRM_DISPLAY_HELPER.
Move all parts of DRM_DISPLAY_HELPER to an if DRM_DISPLAY_HELPER block.
It is not possible to make those symbols select DRM_DISPLAY_HELPER
because of the link issues when a part of the helper is selected to be
built-in, while other part is selected to be as module. In such a case
the modular part doesn't get built at all, leading to undefined symbols.
The only viable alternative is to split drm_display_helper.ko into
several small modules, each of them having their own dependencies.
Suggested-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240903-drm-bridge-connector-fix-hdmi-reset-v5-1-daebde6d9857@linaro.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Currently there is no way to apply quirk on device only if certain panel
model is installed. This patch implements such mechanism by adding new
quirk type intel_dpcd_quirk which contains also sink_oui and sink_device_id
fields and using also them to figure out if applying quirk is needed.
New intel_init_dpcd_quirks is added and called after drm_dp_read_desc with
proper sink device identity read from dpcdc.
v3:
- !mem_is_zero fixed to mem_is_zero
v2:
- instead of using struct intel_quirk add new struct intel_dpcd_quirk
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240902064241.1020965-2-jouni.hogander@intel.com
(cherry picked from commit b3b9136990)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
PMO assumes that like timings can be synchronized, but DC only allows
this if the signal types match.
Reviewed-by: Austin Zheng <austin.zheng@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 29d3d6af43)
Cc: stable@vger.kernel.org
Backlight updates require aux and/or register access. Therefore, driver
needs to disallow IPS beforehand.
So, acquire the dc lock before calling into dc to update backlight - we
should be doing this regardless of IPS. Then, while the lock is held,
disallow IPS before calling into dc, then allow IPS afterwards (if it
was previously allowed).
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 988fe28626)
Cc: stable@vger.kernel.org # 6.10+
This adds allocation latency, but aligns better with user
expectations. The latency should improve with the drm buddy
clearing patches that Arun has been working on.
In addition this fixes the high CPU spikes seen when doing
wipe on release.
v2: always set AMDGPU_GEM_CREATE_VRAM_CLEARED (Christian)
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3528
Fixes: a68c7eaa7a ("drm/amdgpu: Enable clear page functionality")
Acked-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com> (v1)
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Cc: Christian König <christian.koenig@amd.com>
(cherry picked from commit 6c0a7c3c69)
Cc: stable@vger.kernel.org # 6.10.x
For mes11 old firmware has issue to map legacy queue,
add a flag to switch mes to map legacy queue.
Fixes: f9d8c5c785 ("drm/amdgpu/gfx: enable mes to map legacy queue support")
Reported-by: Andrew Worsley <amworsley@gmail.com>
Link: https://lists.freedesktop.org/archives/amd-gfx/2024-August/112773.html
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 52491d97aa)
[Why]
DCN IPS interoperates with other system idle power features, such as
Zstates.
On DCN35, there is a known issue where system Z8 + DCN IPS2 causes a
hard hang. We observe this on systems where the SBIOS allows Z8.
Though there is a SBIOS fix, there's no guarantee that users will get it
any time soon, or even install it. A workaround is needed to prevent
this from rearing its head in the wild.
[How]
For DCN35, check the pmfw version to determine whether the SBIOS has the
fix. If not, set IPS1+RCG as the deepest possible state in all cases
except for s0ix and display off (DPMS). Otherwise, enable all IPS
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 28d43d0895)
Cc: stable@vger.kernel.org
When debug_fence_free() is unused
(CONFIG_DRM_I915_SW_FENCE_DEBUG_OBJECTS=n), it prevents kernel builds
with clang, `make W=1` and CONFIG_WERROR=y:
.../i915_sw_fence.c:118:20: error: unused function 'debug_fence_free' [-Werror,-Wunused-function]
118 | static inline void debug_fence_free(struct i915_sw_fence *fence)
| ^~~~~~~~~~~~~~~~
Fix this by marking debug_fence_free() with __maybe_unused.
See also commit 6863f5643d ("kbuild: allow Clang to find unused static
inline functions for W=1 build").
Fixes: fc1584059d ("drm/i915: Integrate i915_sw_fence with debugobjects")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240829155950.1141978-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit 8be4dce5ea)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
When debug_fence_init_onstack() is unused (CONFIG_DRM_I915_SELFTEST=n),
it prevents kernel builds with clang, `make W=1` and CONFIG_WERROR=y:
.../i915_sw_fence.c:97:20: error: unused function 'debug_fence_init_onstack' [-Werror,-Wunused-function]
97 | static inline void debug_fence_init_onstack(struct i915_sw_fence *fence)
| ^~~~~~~~~~~~~~~~~~~~~~~~
Fix this by marking debug_fence_init_onstack() with __maybe_unused.
See also commit 6863f5643d ("kbuild: allow Clang to find unused static
inline functions for W=1 build").
Fixes: 214707fc2c ("drm/i915/selftests: Wrap a timer into a i915_sw_fence")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240829155950.1141978-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit 5bf472058f)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
On ilk/snb the pipe may be configured to place the LUT before or
after the CSC depending on various factors, but as there is only
one LUT (no split mode like on IVB+) we only advertise a gamma_lut
and no degamma_lut in the uapi to avoid confusing userspace.
This can cause a problem during readout if the VBIOS/GOP enabled
the LUT in the pre CSC configuration. The current code blindly
assigns the results of the readout to the degamma_lut, which will
cause a failure during the next atomic_check() as we aren't expecting
anything to be in degamma_lut since it's not visible to userspace.
Fix the problem by assigning whatever LUT we read out from the
hardware into gamma_lut.
Cc: stable@vger.kernel.org
Fixes: d2559299d3 ("drm/i915: Make ilk_read_luts() capable of degamma readout")
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/11608
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240710124137.16773-1-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
(cherry picked from commit 33eca84db6)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
If the GSC FW fails to load the GSC HW hangs permanently; the only ways
to recover it are FLR or D3cold entry, with the former only being
supported on driver unload and the latter only on DGFX, for which we
don't need to load the GSC. Therefore, if GSC fails to load there is no
need to try again because the HW is stuck in the error state and the
submission to load the FW would just hang the GSCCS.
Note that, due to wa_14015076503, on MTL the GuC escalates all GSCCS
hangs to full GT resets, which would trigger a new attempt to load the
GSC FW in the post-reset HW re-init; this issue is also fixed by not
attempting to load the GSC FW after an error.
Fixes: 15bd4a67e9 ("drm/i915/gsc: GSC firmware loading")
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: <stable@vger.kernel.org> # v6.3+
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240820215952.2290807-1-daniele.ceraolospurio@intel.com
(cherry picked from commit 03ded4d432)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
-----BEGIN PGP SIGNATURE-----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=l4NV
-----END PGP SIGNATURE-----
Merge tag 'v6.11-rc5-smb-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
- copy_file_range fix
- two read fixes including read past end of file rc fix and read retry
crediting fix
- falloc zero range fix
* tag 'v6.11-rc5-smb-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Fix FALLOC_FL_ZERO_RANGE to preflush buffered part of target region
cifs: Fix copy offload to flush destination region
netfs, cifs: Fix handling of short DIO read
cifs: Fix lack of credit renegotiation on read retry
- Fix a rare data corruption in the rebalance path, caught as a nonce
inconsistency on encrypted filesystems
- Revert lockless buffered write path
- Mark more errors as autofix
-----BEGIN PGP SIGNATURE-----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=LTM8
-----END PGP SIGNATURE-----
Merge tag 'bcachefs-2024-08-21' of https://github.com/koverstreet/bcachefs
Push bcachefs fixes from Kent Overstreet:
"The data corruption in the buffered write path is troubling; inode
lock should not have been able to cause that...
- Fix a rare data corruption in the rebalance path, caught as a nonce
inconsistency on encrypted filesystems
- Revert lockless buffered write path
- Mark more errors as autofix"
* tag 'bcachefs-2024-08-21' of https://github.com/koverstreet/bcachefs:
bcachefs: Mark more errors as autofix
bcachefs: Revert lockless buffered IO path
bcachefs: Fix bch2_extents_match() false positive
bcachefs: Fix failure to return error in data_update_index_update()
errors that are known to always be safe to fix should be autofix: this
should be most errors even at this point, but that will need some
thorough review.
note that errors are still logged in the superblock, so we'll still know
that they happened.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We had a report of data corruption on nixos when building installer
images.
https://github.com/NixOS/nixpkgs/pull/321055#issuecomment-2184131334
It seems that writes are being dropped, but only when issued by QEMU,
and possibly only in snapshot mode. It's undetermined if it's write
calls are being dropped or dirty folios.
Further testing, via minimizing the original patch to just the change
that skips the inode lock on non appends/truncates, reveals that it
really is just not taking the inode lock that causes the corruption: it
has nothing to do with the other logic changes for preserving write
atomicity in corner cases.
It's also kernel config dependent: it doesn't reproduce with the minimal
kernel config that ktest uses, but it does reproduce with nixos's distro
config. Bisection the kernel config initially pointer the finger at page
migration or compaction, but it appears that was erroneous; we haven't
yet determined what kernel config option actually triggers it.
Sadly it appears this will have to be reverted since we're getting too
close to release and my plate is full, but we'd _really_ like to fully
debug it.
My suspicion is that this patch is exposing a preexisting bug - the
inode lock actually covers very little in IO paths, and we have a
different lock (the pagecache add lock) that guards against races with
truncate here.
Fixes: 7e64c86cdc ("bcachefs: Buffered write path now can avoid the inode lock")
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Pull misc fixes from Guenter Roeck.
These are fixes for regressions that Guenther has been reporting, and
the maintainers haven't picked up and sent in. With rc6 fairly imminent,
I'm taking them directly from Guenter.
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
apparmor: fix policy_unpack_test on big endian systems
Revert "MIPS: csrc-r4k: Apply verification clocksource flags"
microblaze: don't treat zero reserved memory regions as error
- set the direction of the wlan-enable GPIO to output after requesting
it as-is
-----BEGIN PGP SIGNATURE-----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=VM4v
-----END PGP SIGNATURE-----
Merge tag 'pwrseq-fixes-for-v6.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull power sequencing fix from Bartosz Golaszewski:
"A follow-up fix for the power sequencing subsystem. It turned out the
previous fix for this driver was incomplete and broke the WLAN support
on some platforms. This addresses the issue.
- set the direction of the wlan-enable GPIO to output after
requesting it as-is"
* tag 'pwrseq-fixes-for-v6.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
power: sequencing: qcom-wcn: set the wlan-enable GPIO to output
Commit a9aaf1ff88 ("power: sequencing: request the WLAN enable GPIO
as-is") broke WLAN on boards on which the wlan-enable GPIO enabling the
wifi module isn't in output mode by default. We need to set direction to
output while retaining the value that was already set to keep the ath
module on if it's already started.
Fixes: a9aaf1ff88 ("power: sequencing: request the WLAN enable GPIO as-is")
Link: https://lore.kernel.org/r/20240823115500.37280-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Here are some small USB fixes for 6.11-rc6. Included in here are:
- dwc3 driver fixes for reported issues
- MAINTAINER file update, marking a driver as unsupported :(
- cdnsp driver fixes
- USB gadget driver fix
- USB sysfs fix
- other tiny fixes
- new device ids for usb serial driver
All of these have been in linux-next this week with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZtNVTw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymqWwCgmITg5Owdigw+ejnkLJ4Q/CHYfRkAoLh7nkcm
kaX7IqZLgVDr4rvgVcmR
=azoE
-----END PGP SIGNATURE-----
Merge tag 'usb-6.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB fixes for 6.11-rc6. Included in here are:
- dwc3 driver fixes for reported issues
- MAINTAINER file update, marking a driver as unsupported :(
- cdnsp driver fixes
- USB gadget driver fix
- USB sysfs fix
- other tiny fixes
- new device ids for usb serial driver
All of these have been in linux-next this week with no reported
issues"
* tag 'usb-6.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: serial: option: add MeiG Smart SRM825L
usb: cdnsp: fix for Link TRB with TC
usb: dwc3: st: add missing depopulate in probe error path
usb: dwc3: st: fix probed platform device ref count on probe error path
usb: dwc3: ep0: Don't reset resource alloc flag (including ep0)
usb: core: sysfs: Unmerge @usb3_hardware_lpm_attr_group in remove_power_attributes()
usb: typec: fsa4480: Relax CHIP_ID check
usb: dwc3: xilinx: add missing depopulate in probe error path
usb: dwc3: omap: add missing depopulate in probe error path
dt-bindings: usb: microchip,usb2514: Fix reference USB device schema
usb: gadget: uvc: queue pump work in uvcg_video_enable()
cdc-acm: Add DISABLE_ECHO quirk for GE HealthCare UI Controller
usb: cdnsp: fix incorrect index in cdnsp_get_hw_deq function
usb: dwc3: core: Prevent USB core invalid event buffer address access
MAINTAINERS: Mark UVC gadget driver as orphan
Minor fixes only. The sd.c one ignores a sync cache request if format
is in progress which can happen if formatting a drive across
suspend/resume.
Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZtM61CYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishZ+yAQDz47pp
ZEr9bOMueiIYs+ZpmK1KRBHviFApXr9JJGzoHAD/WsUN43+5+y12QhGWSA0/M4qo
Tog2K3HXvb4kIsDoXEg=
=n2gm
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Minor fixes only.
The sd.c one ignores a sync cache request if format is in progress
which can happen if formatting a drive across suspend/resume"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: sd: Ignore command SYNCHRONIZE CACHE error if format in progress
scsi: aacraid: Fix double-free on probe failure
scsi: lpfc: Fix overflow build issue
