[ Upstream commit c15d5c62ab ]
When a netdev issues a RX async resync request for a TLS connection,
the TLS module handles it by logging record headers and attempting to
match them to the tcp_sn provided by the device. If a match is found,
the TLS module approves the tcp_sn for resynchronization.
While waiting for a device response, the TLS module also increments
rcd_delta each time a new TLS record is received, tracking the distance
from the original resync request.
However, if the device response is delayed or fails (e.g due to
unstable connection and device getting out of tracking, hardware
errors, resource exhaustion etc.), the TLS module keeps logging and
incrementing, which can lead to a WARN() when rcd_delta exceeds the
threshold.
To address this, introduce tls_offload_rx_resync_async_request_cancel()
to explicitly cancel resync requests when a device response failure is
detected. Call this helper also as a final safeguard when rcd_delta
crosses its threshold, as reaching this point implies that earlier
cancellation did not occur.
Signed-off-by: Shahar Shitrit <shshitrit@nvidia.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1761508983-937977-3-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9311e9540a ]
In bareudp.sh, this script uses /bin/sh and it will load another lib.sh
BASH script at the very beginning.
But on some operating systems like Ubuntu, /bin/sh is actually pointed to
DASH, thus it will try to run BASH commands with DASH and consequently
leads to syntax issues:
# ./bareudp.sh: 4: ./lib.sh: Bad substitution
# ./bareudp.sh: 5: ./lib.sh: source: not found
# ./bareudp.sh: 24: ./lib.sh: Syntax error: "(" unexpected
Fix this by explicitly using BASH for bareudp.sh. This fixes test
execution failures on systems where /bin/sh is not BASH.
Reported-by: Edoardo Canepa <edoardo.canepa@canonical.com>
Link: https://bugs.launchpad.net/bugs/2129812
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://patch.msgid.link/20251027095710.2036108-2-po-hsu.lin@canonical.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a0b7780602 ]
Commit 995412e23b ("blk-mq: Replace tags->lock with SRCU for tag
iterators") introduced the following regression:
Call trace:
__srcu_read_lock+0x30/0x80 (P)
blk_mq_tagset_busy_iter+0x44/0x300
scsi_host_busy+0x38/0x70
ufshcd_print_host_state+0x34/0x1bc
ufshcd_link_startup.constprop.0+0xe4/0x2e0
ufshcd_init+0x944/0xf80
ufshcd_pltfrm_init+0x504/0x820
ufs_rockchip_probe+0x2c/0x88
platform_probe+0x5c/0xa4
really_probe+0xc0/0x38c
__driver_probe_device+0x7c/0x150
driver_probe_device+0x40/0x120
__driver_attach+0xc8/0x1e0
bus_for_each_dev+0x7c/0xdc
driver_attach+0x24/0x30
bus_add_driver+0x110/0x230
driver_register+0x68/0x130
__platform_driver_register+0x20/0x2c
ufs_rockchip_pltform_init+0x1c/0x28
do_one_initcall+0x60/0x1e0
kernel_init_freeable+0x248/0x2c4
kernel_init+0x20/0x140
ret_from_fork+0x10/0x20
Fix this regression by making scsi_host_busy() check whether the SCSI
host tag set has already been initialized. tag_set->ops is set by
scsi_mq_setup_tags() just before blk_mq_alloc_tag_set() is called. This
fix is based on the assumption that scsi_host_busy() and
scsi_mq_setup_tags() calls are serialized. This is the case in the UFS
driver.
Reported-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Closes: https://lore.kernel.org/linux-block/pnezafputodmqlpumwfbn644ohjybouveehcjhz2hmhtcf2rka@sdhoiivync4y/
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patch.msgid.link/20251007214800.1678255-1-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f765fdfcd8 ]
Fix typo in description of enable_gcm_256 module parameter
Suggested-by: Thomas Spear <speeddymon@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a2a69add80 ]
Some bus devices can be marked as disabled for specific SoCs or models.
Those should not be registered to avoid probing them.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20251003125126.27950-1-zajec5@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 002541ef65 ]
During connect(), acting on a signal/timeout by disconnecting an already
established socket leads to several issues:
1. connect() invoking vsock_transport_cancel_pkt() ->
virtio_transport_purge_skbs() may race with sendmsg() invoking
virtio_transport_get_credit(). This results in a permanently elevated
`vvs->bytes_unsent`. Which, in turn, confuses the SOCK_LINGER handling.
2. connect() resetting a connected socket's state may race with socket
being placed in a sockmap. A disconnected socket remaining in a sockmap
breaks sockmap's assumptions. And gives rise to WARNs.
3. connect() transitioning SS_CONNECTED -> SS_UNCONNECTED allows for a
transport change/drop after TCP_ESTABLISHED. Which poses a problem for
any simultaneous sendmsg() or connect() and may result in a
use-after-free/null-ptr-deref.
Do not disconnect socket on signal/timeout. Keep the logic for unconnected
sockets: they don't linger, can't be placed in a sockmap, are rejected by
sendmsg().
[1]: https://lore.kernel.org/netdev/e07fd95c-9a38-4eea-9638-133e38c2ec9b@rbox.co/
[2]: https://lore.kernel.org/netdev/20250317-vsock-trans-signal-race-v4-0-fc8837f3f1d4@rbox.co/
[3]: https://lore.kernel.org/netdev/60f1b7db-3099-4f6a-875e-af9f6ef194f6@rbox.co/
Fixes: d021c34405 ("VSOCK: Introduce VM Sockets")
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20251119-vsock-interrupted-connect-v2-1-70734cf1233f@rbox.co
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 896f1a2493 ]
The loops in 'qede_tpa_cont()' and 'qede_tpa_end()', iterate
over 'cqe->len_list[]' using only a zero-length terminator as
the stopping condition. If the terminator was missing or
malformed, the loop could run past the end of the fixed-size array.
Add an explicit bound check using ARRAY_SIZE() in both loops to prevent
a potential out-of-bounds access.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 55482edc25 ("qede: Add slowpath/fastpath support and enable hardware GRO")
Signed-off-by: Pavel Zhigulin <Pavel.Zhigulin@kaspersky.com>
Link: https://patch.msgid.link/20251113112757.4166625-1-Pavel.Zhigulin@kaspersky.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3cd39bc3b1 ]
Touching files so used for the kernel,
forces 'make' to recompile most of the kernel.
Having those definitions in more granular files
helps avoid recompiling so much of the kernel.
Signed-off-by: Alejandro Colomar <alx@kernel.org>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20230817143352.132583-2-lucas.segarra.fernandez@intel.com
[andy: reduced to cover only string.h for now]
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Stable-dep-of: 896f1a2493 ("net: qlogic/qede: fix potential out-of-bounds read in qede_tpa_cont() and qede_tpa_end()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d8bb447efc ]
isst_if_probe() uses pci_read_config_dword() that returns PCIBIOS_*
codes. The return code is returned from the probe function as is but
probe functions should return normal errnos. A proper implementation
can be found in drivers/leds/leds-ss4200.c.
Convert PCIBIOS_* return codes using pcibios_err_to_errno() into
normal errno before returning.
Fixes: d3a2358429 ("platform/x86: ISST: Add Intel Speed Select mmio interface")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://patch.msgid.link/20251117033354.132-1-vulab@iscas.ac.cn
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit da02a18248 ]
The function 'mpc_rcvd_sweep_req(mpcginfo)' is called conditionally
from function 'ctcmpc_unpack_skb'. It frees passed mpcginfo.
After that a call to function 'kfree' in function 'ctcmpc_unpack_skb'
frees it again.
Remove 'kfree' call in function 'mpc_rcvd_sweep_req(mpcginfo)'.
Bug detected by the clang static analyzer.
Fixes: 0c0b20587b ("s390/ctcm: fix potential memory leak")
Reviewed-by: Aswin Karuvally <aswin@linux.ibm.com>
Signed-off-by: Aleksei Nikiforov <aleksei.nikiforov@linux.ibm.com>
Signed-off-by: Aswin Karuvally <aswin@linux.ibm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251112182724.1109474-1-aswin@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6d87cd5335 ]
Blktests test cases nvme/014, 057 and 058 fail occasionally due to a
lockdep WARN. As reported in the Closes tag URL, the WARN indicates that
a deadlock can happen due to the dependency among disk->open_mutex,
kblockd workqueue completion and partition_scan_work completion.
To avoid the lockdep WARN and the potential deadlock, cut the dependency
by running the partition_scan_work not by kblockd workqueue but by
nvme_wq.
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Closes: https://lore.kernel.org/linux-block/CAHj4cs8mJ+R_GmQm9R8ebResKAWUE8kF5+_WVg0v8zndmqd6BQ@mail.gmail.com/
Link: https://lore.kernel.org/linux-block/oeyzci6ffshpukpfqgztsdeke5ost5hzsuz4rrsjfmvpqcevax@5nhnwbkzbrpa/
Fixes: 1f021341ee ("nvme-multipath: defer partition scanning")
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dfe28c4167 ]
The validation of the set(nsh(...)) action is completely wrong.
It runs through the nsh_key_put_from_nlattr() function that is the
same function that validates NSH keys for the flow match and the
push_nsh() action. However, the set(nsh(...)) has a very different
memory layout. Nested attributes in there are doubled in size in
case of the masked set(). That makes proper validation impossible.
There is also confusion in the code between the 'masked' flag, that
says that the nested attributes are doubled in size containing both
the value and the mask, and the 'is_mask' that says that the value
we're parsing is the mask. This is causing kernel crash on trying to
write into mask part of the match with SW_FLOW_KEY_PUT() during
validation, while validate_nsh() doesn't allocate any memory for it:
BUG: kernel NULL pointer dereference, address: 0000000000000018
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 1c2383067 P4D 1c2383067 PUD 20b703067 PMD 0
Oops: Oops: 0000 [#1] SMP NOPTI
CPU: 8 UID: 0 Kdump: loaded Not tainted 6.17.0-rc4+ #107 PREEMPT(voluntary)
RIP: 0010:nsh_key_put_from_nlattr+0x19d/0x610 [openvswitch]
Call Trace:
<TASK>
validate_nsh+0x60/0x90 [openvswitch]
validate_set.constprop.0+0x270/0x3c0 [openvswitch]
__ovs_nla_copy_actions+0x477/0x860 [openvswitch]
ovs_nla_copy_actions+0x8d/0x100 [openvswitch]
ovs_packet_cmd_execute+0x1cc/0x310 [openvswitch]
genl_family_rcv_msg_doit+0xdb/0x130
genl_family_rcv_msg+0x14b/0x220
genl_rcv_msg+0x47/0xa0
netlink_rcv_skb+0x53/0x100
genl_rcv+0x24/0x40
netlink_unicast+0x280/0x3b0
netlink_sendmsg+0x1f7/0x430
____sys_sendmsg+0x36b/0x3a0
___sys_sendmsg+0x87/0xd0
__sys_sendmsg+0x6d/0xd0
do_syscall_64+0x7b/0x2c0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
The third issue with this process is that while trying to convert
the non-masked set into masked one, validate_set() copies and doubles
the size of the OVS_KEY_ATTR_NSH as if it didn't have any nested
attributes. It should be copying each nested attribute and doubling
them in size independently. And the process must be properly reversed
during the conversion back from masked to a non-masked variant during
the flow dump.
In the end, the only two outcomes of trying to use this action are
either validation failure or a kernel crash. And if somehow someone
manages to install a flow with such an action, it will most definitely
not do what it is supposed to, since all the keys and the masks are
mixed up.
Fixing all the issues is a complex task as it requires re-writing
most of the validation code.
Given that and the fact that this functionality never worked since
introduction, let's just remove it altogether. It's better to
re-introduce it later with a proper implementation instead of trying
to fix it in stable releases.
Fixes: b2d0f5d5dc ("openvswitch: enable NSH support")
Reported-by: Junvy Yang <zhuque@tencent.com>
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Link: https://patch.msgid.link/20251112112246.95064-1-i.maximets@ovn.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b0c959fec1 ]
The call to devlink_info_version_fixed_put() in
mlxsw_linecard_devlink_info_get() did not check for errors,
although it is checked everywhere in the code.
Add missed 'err' check to the mlxsw_linecard_devlink_info_get()
Fixes: 3fc0c51905 ("mlxsw: core_linecards: Expose device PSID over device info")
Signed-off-by: Pavel Zhigulin <Pavel.Zhigulin@kaspersky.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20251113161922.813828-1-Pavel.Zhigulin@kaspersky.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e6751b0b19 ]
The LED setup routine registered both led_sync_good
and led_is_gm devices without checking the return
values of led_classdev_register(). If either registration
failed, the function continued silently, leaving the
driver in a partially-initialized state and leaking
a registered LED classdev.
Add proper error handling
Fixes: 7d9ee2e8ff ("net: dsa: hellcreek: Add PTP status LEDs")
Signed-off-by: Pavel Zhigulin <Pavel.Zhigulin@kaspersky.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Kurt Kanzenbach <kurt@linutronix.de>
Link: https://patch.msgid.link/20251113135745.92375-1-Pavel.Zhigulin@kaspersky.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6cbab9f0da ]
Add a call to put_pid() corresponding to get_task_pid().
host1x_memory_context_alloc() does not take ownership of the PID so we
need to free it here to avoid leaking.
Signed-off-by: Prateek Agarwal <praagarwal@nvidia.com>
Fixes: e09db97889 ("drm/tegra: Support context isolation")
[mperttunen@nvidia.com: reword commit message]
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20250919-host1x-put-pid-v1-1-19c2163dfa87@nvidia.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8935002fc3 ]
On Tegra234, engines that are programmed through Host1x channels can
be attached to either the NISO0 or NISO1 SMMU. Because of that, when
selecting a context device to use with an engine, we need to select
one that is also attached to the same SMMU.
Add a parameter to host1x_memory_context_alloc to specify which device
we are allocating a context for, and use it to pick an appropriate
context device.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
[treding@nvidia.com: update !IOMMU_API stub signature]
Signed-off-by: Thierry Reding <treding@nvidia.com>
Stable-dep-of: 6cbab9f0da ("drm/tegra: Add call to put_pid()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 407a06507c ]
The function mlxsw_sp_flower_stats() calls mlxsw_sp_acl_ruleset_get() to
obtain a ruleset reference. If the subsequent call to
mlxsw_sp_acl_rule_lookup() fails to find a rule, the function returns
an error without releasing the ruleset reference, causing a memory leak.
Fix this by using a goto to the existing error handling label, which
calls mlxsw_sp_acl_ruleset_put() to properly release the reference.
Fixes: 7c1b8eb175 ("mlxsw: spectrum: Add support for TC flower offload statistics")
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20251112052114.1591695-1-zilin@seu.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 61fafbee6c ]
The GSO segmentation functions for ESP tunnel mode
(xfrm4_tunnel_gso_segment and xfrm6_tunnel_gso_segment) were
determining the inner packet's L2 protocol type by checking the static
x->inner_mode.family field from the xfrm state.
This is unreliable. In tunnel mode, the state's actual inner family
could be defined by x->inner_mode.family or by
x->inner_mode_iaf.family. Checking only the former can lead to a
mismatch with the actual packet being processed, causing GSO to create
segments with the wrong L2 header type.
This patch fixes the bug by deriving the inner mode directly from the
packet's inner protocol stored in XFRM_MODE_SKB_CB(skb)->protocol.
Instead of replicating the code, this patch modifies the
xfrm_ip2inner_mode helper function. It now correctly returns
&x->inner_mode if the selector family (x->sel.family) is already
specified, thereby handling both specific and AF_UNSPEC cases
appropriately.
With this change, ESP GSO can use xfrm_ip2inner_mode to get the
correct inner mode. It doesn't affect existing callers, as the updated
logic now mirrors the checks they were already performing externally.
Fixes: 26dbd66eab ("esp: choose the correct inner protocol for GSO on inter address family tunnels")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 80d8a9ad15 upstream.
[Why]
Accoreding to CP updated to RS64 on gfx11,
WRITE_DATA with PREEMPTION_META_MEMORY(dst_sel=8) is illegal for CP FW.
That packet is used for MCBP on F32 based system.
So it would lead to incorrect GRBM write and FW is not handling that
extra case correctly.
[How]
With gfx11 rs64 enabled, skip emit de meta data.
Signed-off-by: Yifan Zha <Yifan.Zha@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 8366cd442d)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4c5376b4b1 upstream.
driver_find_device() calls get_device() to increment the reference
count once a matching device is found, but there is no put_device() to
balance the reference count. To avoid reference count leakage, add
put_device() to decrease the reference count.
Found by code review.
Cc: stable@vger.kernel.org
Fixes: a31500fe70 ("drm/tegra: dc: Restore coupling of display controllers")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Acked-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20251022114720.24937-1-make24@iscas.ac.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1bba3f219c upstream.
In case of DSS corruption, the MPTCP protocol tries to avoid the subflow
reset if fallback is possible. Such corruptions happen in the receive
path; to ensure fallback is possible the stack additionally needs to
check for OoO data, otherwise the fallback will break the data stream.
Fixes: e32d262c89 ("mptcp: handle consistently DSS corruption")
Cc: stable@vger.kernel.org
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/598
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251118-net-mptcp-misc-fixes-6-18-rc6-v1-4-806d3781c95f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4f102d747c upstream.
The rcv window is shared among all the subflows. Currently, MPTCP sync
the TCP-level rcv window with the MPTCP one at tcp_transmit_skb() time.
The above means that incoming data may sporadically observe outdated
TCP-level rcv window and being wrongly dropped by TCP.
Address the issue checking for the edge condition before queuing the
data at TCP level, and eventually syncing the rcv window as needed.
Note that the issue is actually present from the very first MPTCP
implementation, but backports older than the blamed commit below will
range from impossible to useless.
Before:
$ nstat -n; sleep 1; nstat -z TcpExtBeyondWindow
TcpExtBeyondWindow 14 0.0
After:
$ nstat -n; sleep 1; nstat -z TcpExtBeyondWindow
TcpExtBeyondWindow 0 0.0
Fixes: fa3fe2b150 ("mptcp: track window announced to peer")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251118-net-mptcp-misc-fixes-6-18-rc6-v1-2-806d3781c95f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 17393fa7b7 upstream.
I'm observing very frequent self-tests failures in case of fallback when
running on a CONFIG_PREEMPT kernel.
The root cause is that subflow_sched_work_if_closed() closes any subflow
as soon as it is half-closed and has no incoming data pending.
That works well for regular subflows - MPTCP needs bi-directional
connectivity to operate on a given subflow - but for fallback socket is
race prone.
When TCP peer closes the connection before the MPTCP one,
subflow_sched_work_if_closed() will schedule the MPTCP worker to
gracefully close the subflow, and shortly after will do another schedule
to inject and process a dummy incoming DATA_FIN.
On CONFIG_PREEMPT kernel, the MPTCP worker can kick-in and close the
fallback subflow before subflow_sched_work_if_closed() is able to create
the dummy DATA_FIN, unexpectedly interrupting the transfer.
Address the issue explicitly avoiding closing fallback subflows on when
the peer is only half-closed.
Note that, when the subflow is able to create the DATA_FIN before the
worker invocation, the worker will change the msk state before trying to
close the subflow and will skip the latter operation as the msk will not
match anymore the precondition in __mptcp_close_subflow().
Fixes: f09b0ad55a ("mptcp: close subflow when receiving TCP+FIN")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251118-net-mptcp-misc-fixes-6-18-rc6-v1-3-806d3781c95f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5e15395f6d upstream.
mptcp_cleanup_rbuf() needs to know the last most recent, mptcp-level
rcv_wnd sent, and such information is tracked into the msk->old_wspace
field, updated at ack transmission time by mptcp_write_options().
Fallback socket do not add any mptcp options, such helper is never
invoked, and msk->old_wspace value remain stale. That in turn makes
ack generation at recvmsg() time quite random.
Address the issue ensuring mptcp_write_options() is invoked even for
fallback sockets, and just update the needed info in such a case.
The issue went unnoticed for a long time, as mptcp currently overshots
the fallback socket receive buffer autotune significantly. It is going
to change in the near future.
Fixes: e3859603ba ("mptcp: better msk receive window updates")
Cc: stable@vger.kernel.org
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/594
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Geliang Tang <geliang@kernel.org>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251118-net-mptcp-misc-fixes-6-18-rc6-v1-1-806d3781c95f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 035bca3f01 upstream.
syzbot reported use-after-free in mptcp_schedule_work() [1]
Issue here is that mptcp_schedule_work() schedules a work,
then gets a refcount on sk->sk_refcnt if the work was scheduled.
This refcount will be released by mptcp_worker().
[A] if (schedule_work(...)) {
[B] sock_hold(sk);
return true;
}
Problem is that mptcp_worker() can run immediately and complete before [B]
We need instead :
sock_hold(sk);
if (schedule_work(...))
return true;
sock_put(sk);
[1]
refcount_t: addition on 0; use-after-free.
WARNING: CPU: 1 PID: 29 at lib/refcount.c:25 refcount_warn_saturate+0xfa/0x1d0 lib/refcount.c:25
Call Trace:
<TASK>
__refcount_add include/linux/refcount.h:-1 [inline]
__refcount_inc include/linux/refcount.h:366 [inline]
refcount_inc include/linux/refcount.h:383 [inline]
sock_hold include/net/sock.h:816 [inline]
mptcp_schedule_work+0x164/0x1a0 net/mptcp/protocol.c:943
mptcp_tout_timer+0x21/0xa0 net/mptcp/protocol.c:2316
call_timer_fn+0x17e/0x5f0 kernel/time/timer.c:1747
expire_timers kernel/time/timer.c:1798 [inline]
__run_timers kernel/time/timer.c:2372 [inline]
__run_timer_base+0x648/0x970 kernel/time/timer.c:2384
run_timer_base kernel/time/timer.c:2393 [inline]
run_timer_softirq+0xb7/0x180 kernel/time/timer.c:2403
handle_softirqs+0x22f/0x710 kernel/softirq.c:622
__do_softirq kernel/softirq.c:656 [inline]
run_ktimerd+0xcf/0x190 kernel/softirq.c:1138
smpboot_thread_fn+0x542/0xa60 kernel/smpboot.c:160
kthread+0x711/0x8a0 kernel/kthread.c:463
ret_from_fork+0x4bc/0x870 arch/x86/kernel/process.c:158
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
Cc: stable@vger.kernel.org
Fixes: 3b1d6210a9 ("mptcp: implement and use MPTCP-level retransmission")
Reported-by: syzbot+355158e7e301548a1424@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/6915b46f.050a0220.3565dc.0028.GAE@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251113103924.3737425-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a6b533adfc upstream.
If there is no valid cache info detected (may happen in virtual machine)
for pci_dfl_cache_line_size, kernel shouldn't panic. Because in the PCI
core it will be evaluated to (L1_CACHE_BYTES >> 2).
Cc: <stable@vger.kernel.org>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ebd729fef3 upstream.
Fix a regression that has caused accesses to the PCI MMIO window to
complete unclaimed in non-EVA configurations with the SOC-it family of
system controllers, preventing PCI devices from working that use MMIO.
In the non-EVA case PHYS_OFFSET is set to 0, meaning that PCI_BAR0 is
set with an empty mask (and PCI_HEAD4 matches addresses starting from 0
accordingly). Consequently all addresses are matched for incoming DMA
accesses from PCI. This seems to confuse the system controller's logic
and outgoing bus cycles targeting the PCI MMIO window seem not to make
it to the intended devices.
This happens as well when a wider mask is used with PCI_BAR0, such as
0x80000000 or 0xe0000000, that makes addresses match that overlap with
the PCI MMIO window, which starts at 0x10000000 in our configuration.
Set the mask in PCI_BAR0 to 0xf0000000 for non-EVA then, covering the
non-EVA maximum 256 MiB of RAM, which is what YAMON does and which used
to work correctly up to the offending commit. Set PCI_P2SCMSKL to match
PCI_BAR0 as required by the system controller's specification, and match
PCI_P2SCMAPL to PCI_HEAD4 for identity mapping.
Verified with:
Core board type/revision = 0x0d (Core74K) / 0x01
System controller/revision = MIPS SOC-it 101 OCP / 1.3 SDR-FW-4:1
Processor Company ID/options = 0x01 (MIPS Technologies, Inc.) / 0x1c
Processor ID/revision = 0x97 (MIPS 74Kf) / 0x4c
for non-EVA and with:
Core board type/revision = 0x0c (CoreFPGA-5) / 0x00
System controller/revision = MIPS ROC-it2 / 0.0 FW-1:1 (CLK_unknown) GIC
Processor Company ID/options = 0x01 (MIPS Technologies, Inc.) / 0x00
Processor ID/revision = 0xa0 (MIPS interAptiv UP) / 0x20
for EVA/non-EVA, fixing:
defxx 0000:00:12.0: assign IRQ: got 10
defxx: v1.12 2021/03/10 Lawrence V. Stefani and others
0000:00:12.0: Could not read adapter factory MAC address!
vs:
defxx 0000:00:12.0: assign IRQ: got 10
defxx: v1.12 2021/03/10 Lawrence V. Stefani and others
0000:00:12.0: DEFPA at MMIO addr = 0x10142000, IRQ = 10, Hardware addr = 00-00-f8-xx-xx-xx
0000:00:12.0: registered as fddi0
for non-EVA and causing no change for EVA.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Fixes: 422dd25664 ("MIPS: Malta: Allow PCI devices DMA to lower 2GB physical")
Cc: stable@vger.kernel.org # v4.9+
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e6965188f8 upstream.
If the allocation of tl_hba->sh fails in tcm_loop_driver_probe() and we
attempt to dereference it in tcm_loop_tpg_address_show() we will get a
segfault, see below for an example. So, check tl_hba->sh before
dereferencing it.
Unable to allocate struct scsi_host
BUG: kernel NULL pointer dereference, address: 0000000000000194
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 1 PID: 8356 Comm: tokio-runtime-w Not tainted 6.6.104.2-4.azl3 #1
Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v4.1 09/28/2024
RIP: 0010:tcm_loop_tpg_address_show+0x2e/0x50 [tcm_loop]
...
Call Trace:
<TASK>
configfs_read_iter+0x12d/0x1d0 [configfs]
vfs_read+0x1b5/0x300
ksys_read+0x6f/0xf0
...
Cc: stable@vger.kernel.org
Fixes: 2628b352c3 ("tcm_loop: Show address of tpg in configfs")
Signed-off-by: Hamza Mahfooz <hamzamahfooz@linux.microsoft.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Allen Pais <apais@linux.microsoft.com>
Link: https://patch.msgid.link/1762370746-6304-1-git-send-email-hamzamahfooz@linux.microsoft.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 69aeb50731 upstream.
In the pegasus_notetaker driver, the pegasus_probe() function allocates
the URB transfer buffer using the wMaxPacketSize value from
the endpoint descriptor. An attacker can use a malicious USB descriptor
to force the allocation of a very small buffer.
Subsequently, if the device sends an interrupt packet with a specific
pattern (e.g., where the first byte is 0x80 or 0x42),
the pegasus_parse_packet() function parses the packet without checking
the allocated buffer size. This leads to an out-of-bounds memory access.
Fixes: 1afca2b66a ("Input: add Pegasus Notetaker tablet driver")
Signed-off-by: Seungjin Bae <eeodqql09@gmail.com>
Link: https://lore.kernel.org/r/20251007214131.3737115-2-eeodqql09@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d83f151275 upstream.
This is supposed to be "priv" but we accidentally pass "&priv" which is
an address in the stack and so it will lead to memory corruption when
the imx_sc_key_action() function is called. Remove the &.
Fixes: 768062fd12 ("Input: imx_sc_key - use devm_add_action_or_reset() to handle all cleanups")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/aQYKR75r2VMFJutT@stanley.mountain
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e08969c4d6 upstream.
If cros_ec_keyb_register_matrix() isn't called (due to
`buttons_switches_only`) in cros_ec_keyb_probe(), `ckdev->idev` remains
NULL. An invalid memory access is observed in cros_ec_keyb_process()
when receiving an EC_MKBP_EVENT_KEY_MATRIX event in cros_ec_keyb_work()
in such case.
Unable to handle kernel read from unreadable memory at virtual address 0000000000000028
...
x3 : 0000000000000000 x2 : 0000000000000000
x1 : 0000000000000000 x0 : 0000000000000000
Call trace:
input_event
cros_ec_keyb_work
blocking_notifier_call_chain
ec_irq_thread
It's still unknown about why the kernel receives such malformed event,
in any cases, the kernel shouldn't access `ckdev->idev` and friends if
the driver doesn't intend to initialize them.
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://patch.msgid.link/20251104070310.3212712-1-tzungbi@kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3ceb6ac211 upstream.
Correct RGMII delay application logic in lan937x_set_tune_adj().
The function was missing `data16 &= ~PORT_TUNE_ADJ` before setting the
new delay value. This caused the new value to be bitwise-OR'd with the
existing PORT_TUNE_ADJ field instead of replacing it.
For example, when setting the RGMII 2 TX delay on port 4, the
intended TUNE_ADJUST value of 0 (RGMII_2_TX_DELAY_2NS) was
incorrectly OR'd with the default 0x1B (from register value 0xDA3),
leaving the delay at the wrong setting.
This patch adds the missing mask to clear the field, ensuring the
correct delay value is written. Physical measurements on the RGMII TX
lines confirm the fix, showing the delay changing from ~1ns (before
change) to ~2ns.
While testing on i.MX 8MP showed this was within the platform's timing
tolerance, it did not match the intended hardware-characterized value.
Fixes: b19ac41faa ("net: dsa: microchip: apply rgmii tx and rx delay in phylink mac config")
Cc: stable@vger.kernel.org
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20251114090951.4057261-1-o.rempel@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7d277a7a58 upstream.
be_insert_vlan_in_pkt() is called with the wrb_params argument being NULL
at be_send_pkt_to_bmc() call site. This may lead to dereferencing a NULL
pointer when processing a workaround for specific packet, as commit
bc0c3405ab ("be2net: fix a Tx stall bug caused by a specific ipv6
packet") states.
The correct way would be to pass the wrb_params from be_xmit().
Fixes: 760c295e0e ("be2net: Support for OS2BMC.")
Cc: stable@vger.kernel.org
Signed-off-by: Andrey Vatoropin <a.vatoropin@crpt.ru>
Link: https://patch.msgid.link/20251119105015.194501-1-a.vatoropin@crpt.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b32cc17d60 upstream.
Call scsi_device_put() in ata_scsi_dev_rescan() if the device or its
queue are not running.
Fixes: 0c76106cb9 ("scsi: sd: Fix TCG OPAL unlock on system resume")
Cc: stable@vger.kernel.org
Signed-off-by: Yihang Li <liyihang9@h-partners.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fbade4bd08 upstream.
The sockmap feature allows bpf syscall from userspace, or based on bpf
sockops, replacing the sk_prot of sockets during protocol stack processing
with sockmap's custom read/write interfaces.
'''
tcp_rcv_state_process()
subflow_syn_recv_sock()
tcp_init_transfer(BPF_SOCK_OPS_PASSIVE_ESTABLISHED_CB)
bpf_skops_established <== sockops
bpf_sock_map_update(sk) <== call bpf helper
tcp_bpf_update_proto() <== update sk_prot
'''
Consider two scenarios:
1. When the server has MPTCP enabled and the client also requests MPTCP,
the sk passed to the BPF program is a subflow sk. Since subflows only
handle partial data, replacing their sk_prot is meaningless and will
cause traffic disruption.
2. When the server has MPTCP enabled but the client sends a TCP SYN
without MPTCP, subflow_syn_recv_sock() performs a fallback on the
subflow, replacing the subflow sk's sk_prot with the native sk_prot.
'''
subflow_ulp_fallback()
subflow_drop_ctx()
mptcp_subflow_ops_undo_override()
'''
Subsequently, accept::mptcp_stream_accept::mptcp_fallback_tcp_ops()
converts the subflow to plain TCP.
For the first case, we should prevent it from being combined with sockmap
by setting sk_prot->psock_update_sk_prot to NULL, which will be blocked by
sockmap's own flow.
For the second case, since subflow_syn_recv_sock() has already restored
sk_prot to native tcp_prot/tcpv6_prot, no further action is needed.
Fixes: cec37a6e41 ("mptcp: Handle MP_CAPABLE options for outgoing connections")
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20251111060307.194196-2-jiayuan.chen@linux.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f2c1f63163 upstream.
sb_min_blocksize() may return 0. Check its return value to avoid
accessing the filesystem super block when sb->s_blocksize is 0.
Cc: stable@vger.kernel.org # v6.15
Fixes: 719c1e1829 ("exfat: add super block operations")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Yongpeng Yang <yangyongpeng@xiaomi.com>
Link: https://patch.msgid.link/20251104125009.2111925-3-yangyongpeng.storage@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e4185bed73 upstream.
The "req.start" and "req.len" variables are u64 values that come from the
user at the start of the function. We mask away the high 32 bits of
"req.len" so that's capped at U32_MAX but the "req.start" variable can go
up to U64_MAX which means that the addition can still integer overflow.
Use check_add_overflow() to fix this bug.
Fixes: 095bb6e44e ("mtdchar: add MEMREAD ioctl")
Fixes: 6420ac0af9 ("mtdchar: prevent unbounded allocation in MEMWRITE ioctl")
Cc: stable@vger.kernel.org
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5c56bf214a upstream.
The DMA device pointer `dma_dev` was being dereferenced before ensuring
that `cdns_ctrl->dmac` is properly initialized.
Move the assignment of `dma_dev` after successfully acquiring the DMA
channel to ensure the pointer is valid before use.
Fixes: d76d22b509 ("mtd: rawnand: cadence: use dma_map_resource for sdma address")
Cc: stable@vger.kernel.org
Signed-off-by: Niravkumar L Rabara <niravkumarlaxmidas.rabara@altera.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit beab067dbc upstream.
Based on available evidence, the USB ID 4c4a:4155 used by multiple
devices has been attributed to Jieli. The commit 1a8953f4f7
("HID: Add IGNORE quirk for SMARTLINKTECHNOLOGY") affected touchscreen
functionality. Added checks for manufacturer and serial number to
maintain microphone compatibility, enabling both devices to function
properly.
[jkosina@suse.com: edit shortlog]
Fixes: 1a8953f4f7 ("HID: Add IGNORE quirk for SMARTLINKTECHNOLOGY")
Cc: stable@vger.kernel.org
Tested-by: staffan.melin@oscillator.se
Reviewed-by: Terry Junge <linuxhid@cosmicgizmosystems.com>
Signed-off-by: Zhang Heng <zhangheng@kylinos.cn>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 20739af073 upstream.
There is a race condition between timer_shutdown_sync() and timer
expiration that can lead to hitting a WARN_ON in expire_timers().
The issue occurs when timer_shutdown_sync() clears the timer function
to NULL while the timer is still running on another CPU. The race
scenario looks like this:
CPU0 CPU1
<SOFTIRQ>
lock_timer_base()
expire_timers()
base->running_timer = timer;
unlock_timer_base()
[call_timer_fn enter]
mod_timer()
...
timer_shutdown_sync()
lock_timer_base()
// For now, will not detach the timer but only clear its function to NULL
if (base->running_timer != timer)
ret = detach_if_pending(timer, base, true);
if (shutdown)
timer->function = NULL;
unlock_timer_base()
[call_timer_fn exit]
lock_timer_base()
base->running_timer = NULL;
unlock_timer_base()
...
// Now timer is pending while its function set to NULL.
// next timer trigger
<SOFTIRQ>
expire_timers()
WARN_ON_ONCE(!fn) // hit
...
lock_timer_base()
// Now timer will detach
if (base->running_timer != timer)
ret = detach_if_pending(timer, base, true);
if (shutdown)
timer->function = NULL;
unlock_timer_base()
The problem is that timer_shutdown_sync() clears the timer function
regardless of whether the timer is currently running. This can leave a
pending timer with a NULL function pointer, which triggers the
WARN_ON_ONCE(!fn) check in expire_timers().
Fix this by only clearing the timer function when actually detaching the
timer. If the timer is running, leave the function pointer intact, which is
safe because the timer will be properly detached when it finishes running.
Fixes: 0cc04e8045 ("timers: Add shutdown mechanism to the internal functions")
Signed-off-by: Yipeng Zou <zouyipeng@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20251122093942.301559-1-zouyipeng@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8b0587a885 upstream.
When port buffer headroom changes, port_update_shared_buffer()
recalculates the shared buffer size and splits it in a 3:1 ratio
(lossy:lossless) - Currently, the calculation is:
lossless = shared / 4;
lossy = (shared / 4) * 3;
Meaning, the calculation dropped the remainder of shared % 4 due to
integer division, unintentionally reducing the total shared buffer
by up to three cells on each update. Over time, this could shrink
the buffer below usable size.
Fix it by changing the calculation to:
lossless = shared / 4;
lossy = shared - lossless;
This retains all buffer cells while still approximating the
intended 3:1 split, preventing capacity loss over time.
While at it, perform headroom calculations in units of cells rather than
in bytes for more accurate calculations avoiding extra divisions.
Fixes: a440030d89 ("net/mlx5e: Update shared buffer along with device buffer changes")
Signed-off-by: Armen Ratner <armeng@nvidia.com>
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Alexei Lazar <alazar@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://patch.msgid.link/20250820133209.389065-9-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 623efc4cbd upstream.
The shared buffer pools configuration which are stored in the SBCM
register are updated when the user changes the prio2buffer mapping.
However, in case the user desired prio2buffer change is invalid,
which can occur due to mapping a lossless priority to a not large enough
buffer, the SBCM update should not be performed, as the user command is
failed.
Thus, Perform the SBCM update only after xoff threshold calculation is
performed and the user prio2buffer mapping is validated.
Fixes: a440030d89 ("net/mlx5e: Update shared buffer along with device buffer changes")
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fb07390463 upstream.
Smatch reports that 'ci' can be used uninitialized.
The current code ignores errno coming from tcf_idr_check_alloc, which
will lead to the incorrect usage of 'ci'. Handle the errno as it should.
Fixes: 288864effe ("net/sched: act_connmark: transition to percpu stats and rcu")
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e3e01c1c15 upstream.
In the cited commit, shared buffer updates were added whenever
port buffer gets updated.
However, in case the shared buffer update fails, exiting early from
port_set_buffer() is performed without freeing previously-allocated memory.
Fix it by jumping to out label where memory is freed before returning
with error.
Fixes: a440030d89 ("net/mlx5e: Update shared buffer along with device buffer changes")
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6e8d96909a upstream.
Unifying the asm-generic headers across 32-bit and 64-bit architectures
based on the compiler provided macros was a good idea and appears to work
with all user space, but it caused a regression when building old kernels
on systems that have the new headers installed in /usr/include, as this
combination trips an inconsistency in the kernel's own tools/include
headers that are a mix of userspace and kernel-internal headers.
This affects kernel builds on arm64, riscv64 and loongarch64 systems that
might end up using the "#define __BITS_PER_LONG 32" default from the old
tools headers. Backporting the commit into stable kernels would address
this, but it would still break building kernels without that backport,
and waste time for developers trying to understand the problem.
arm64 build machines are rather common, and on riscv64 this can also
happen in practice, but loongarch64 is probably new enough to not
be used much for building old kernels, so only revert the bits
for arm64 and riscv.
Link: https://lore.kernel.org/all/20230731160402.GB1823389@dev-arch.thelio-3990X/
Reported-by: Nathan Chancellor <nathan@kernel.org>
Fixes: 8386f58f8d ("asm-generic: Unify uapi bitsperlong.h for arm64, riscv and loongarch")
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3f978e3f15 upstream.
In hfcsusb_probe(), the memory allocated for ctrl_urb gets leaked when
setup_instance() fails with an error code. Fix that by freeing the urb
before freeing the hw structure. Also change the error paths to use the
goto ladder style.
Compile tested only. Issue found using a prototype static analysis tool.
Fixes: 69f52adb2d ("mISDN: Add HFC USB driver")
Signed-off-by: Abdun Nihaal <nihaal@cse.iitm.ac.in>
Link: https://patch.msgid.link/20251030042524.194812-1-nihaal@cse.iitm.ac.in
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 9a5b183941 ]
28307d938f ("percpu: make pcpu_alloc() aware of current gfp context")
has fixed a reclaim recursion for scoped GFP_NOFS context. It has done
that by avoiding taking pcpu_alloc_mutex. This is a correct solution as
the worker context with full GFP_KERNEL allocation/reclaim power and which
is using the same lock cannot block the NOFS pcpu_alloc caller.
On the other hand this is a very conservative approach that could lead to
failures because pcpu_alloc lockless implementation is quite limited.
We have a bug report about premature failures when scsi array of 193
devices is scanned. Sometimes (not consistently) the scanning aborts
because the iscsid daemon fails to create the queue for a random scsi
device during the scan. iscsid itself is running with PR_SET_IO_FLUSHER
set so all allocations from this process context are GFP_NOIO. This in
turn makes any pcpu_alloc lockless (without pcpu_alloc_mutex) which leads
to pre-mature failures.
It has turned out that iscsid has worked around this by dropping
PR_SET_IO_FLUSHER (https://github.com/open-iscsi/open-iscsi/pull/382) when
scanning host. But we can do better in this case on the kernel side and
use pcpu_alloc_mutex for NOIO resp. NOFS constrained allocation scopes
too. We just need the WQ worker to never trigger IO/FS reclaim. Achieve
that by enforcing scoped GFP_NOIO for the whole execution of
pcpu_balance_workfn (this will imply NOFS constrain as well). This will
remove the dependency chain and preserve the full allocation power of the
pcpu_alloc call.
While at it make is_atomic really test for blockable allocations.
Link: https://lkml.kernel.org/r/20250206122633.167896-1-mhocko@kernel.org
Fixes: 28307d938f ("percpu: make pcpu_alloc() aware of current gfp context")
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Filipe David Manana <fdmanana@suse.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: chenxin <chenxinxin@xiaomi.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 0c43094f8c ]
The ready event list of an epoll object is protected by read-write
semaphore:
- The consumer (waiter) acquires the write lock and takes items.
- the producer (waker) takes the read lock and adds items.
The point of this design is enabling epoll to scale well with large number
of producers, as multiple producers can hold the read lock at the same
time.
Unfortunately, this implementation may cause scheduling priority inversion
problem. Suppose the consumer has higher scheduling priority than the
producer. The consumer needs to acquire the write lock, but may be blocked
by the producer holding the read lock. Since read-write semaphore does not
support priority-boosting for the readers (even with CONFIG_PREEMPT_RT=y),
we have a case of priority inversion: a higher priority consumer is blocked
by a lower priority producer. This problem was reported in [1].
Furthermore, this could also cause stall problem, as described in [2].
Fix this problem by replacing rwlock with spinlock.
This reduces the event bandwidth, as the producers now have to contend with
each other for the spinlock. According to the benchmark from
https://github.com/rouming/test-tools/blob/master/stress-epoll.c:
On 12 x86 CPUs:
Before After Diff
threads events/ms events/ms
8 7162 4956 -31%
16 8733 5383 -38%
32 7968 5572 -30%
64 10652 5739 -46%
128 11236 5931 -47%
On 4 riscv CPUs:
Before After Diff
threads events/ms events/ms
8 2958 2833 -4%
16 3323 3097 -7%
32 3451 3240 -6%
64 3554 3178 -11%
128 3601 3235 -10%
Although the numbers look bad, it should be noted that this benchmark
creates multiple threads who do nothing except constantly generating new
epoll events, thus contention on the spinlock is high. For real workload,
the event rate is likely much lower, and the performance drop is not as
bad.
Using another benchmark (perf bench epoll wait) where spinlock contention
is lower, improvement is even observed on x86:
On 12 x86 CPUs:
Before: Averaged 110279 operations/sec (+- 1.09%), total secs = 8
After: Averaged 114577 operations/sec (+- 2.25%), total secs = 8
On 4 riscv CPUs:
Before: Averaged 175767 operations/sec (+- 0.62%), total secs = 8
After: Averaged 167396 operations/sec (+- 0.23%), total secs = 8
In conclusion, no one is likely to be upset over this change. After all,
spinlock was used originally for years, and the commit which converted to
rwlock didn't mention a real workload, just that the benchmark numbers are
nice.
This patch is not exactly the revert of commit a218cc4914 ("epoll: use
rwlock in order to reduce ep_poll_callback() contention"), because git
revert conflicts in some places which are not obvious on the resolution.
This patch is intended to be backported, therefore go with the obvious
approach:
- Replace rwlock_t with spinlock_t one to one
- Delete list_add_tail_lockless() and chain_epi_lockless(). These were
introduced to allow producers to concurrently add items to the list.
But now that spinlock no longer allows producers to touch the event
list concurrently, these two functions are not necessary anymore.
Fixes: a218cc4914 ("epoll: use rwlock in order to reduce ep_poll_callback() contention")
Signed-off-by: Nam Cao <namcao@linutronix.de>
Link: https://lore.kernel.org/ec92458ea357ec503c737ead0f10b2c6e4c37d47.1752581388.git.namcao@linutronix.de
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: stable@vger.kernel.org
Reported-by: Frederic Weisbecker <frederic@kernel.org>
Closes: https://lore.kernel.org/linux-rt-users/20210825132754.GA895675@lothringen/ [1]
Reported-by: Valentin Schneider <vschneid@redhat.com>
Closes: https://lore.kernel.org/linux-rt-users/xhsmhttqvnall.mognet@vschneid.remote.csb/ [2]
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Florian Bezdeka <florian.bezdeka@siemens.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
