An unlikely race between __do_essa() and kvm_s390_vm_start_migration(),
kvm_s390_vm_stop_migration(), or dat_get_cmma() was possible.
Fix by locking kvm->slots_arch_lock. Since this is not a hot path, the
overhead of an additional mutex is negligible.
Fixes: e38c884df9 ("KVM: s390: Switch to new gmap")
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-ID: <20260803124040.126471-8-imbrenda@linux.ibm.com>
If kvm_s390_set_cmma_bits() is asked to set CMMA values outside of a
memslot, PGM_ADDRESSING (5) is returned, instead of a negative error
value.
Same issue with kvm_s390_{g,s}et_skeys(), kvm_s390_keyop(), and
dat_reset_reference_bit().
Fix by returning -EFAULT whenever the return value would be > 0, which
is consistent with the behaviour before the gmap rewrite.
Fixes: e38c884df9 ("KVM: s390: Switch to new gmap")
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-ID: <20260803124040.126471-7-imbrenda@linux.ibm.com>
When cleaning up a UCONTROL VM, sca_clear_ext_call() will touch memory
outside of the allocated ESCA block, and UCONTROL VMs don't even use
ESCA.
Fix by not touching ESCA for UCONTROL VMs, and fence the
KVM_S390_INTERRUPT ioctl altogether. Add extra checks in
sca_ext_call_pending() and sca_inject_ext_call() to make sure UCONTROL
VMs won't touch ESCA.
Fencing does not cause regressions with userspace, since UCONTROL VMs
never used KVM_S390_INTERRUPT ioctls.
Fixes: 7d43bafcff ("KVM: s390: Make provisions for ESCA utilization")
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-ID: <20260803124040.126471-6-imbrenda@linux.ibm.com>
If an attempt is made to create a vCPU with an already existing ID,
the duplicated vCPU will be destroyed. When destroying a vCPU, its
ESCA entry will be cleared. In the above scenario, the spurious
duplicate vCPU is destroyed, but the ESCA entry corresponding to the
original vCPU is cleared.
Fix by skipping clearing the ESCA entry if the vCPU creation was not
successful, i.e. if the vcpu->arch.initialized is still zero.
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Fixes: abf4a71ed9 ("KVM: s390: Unlink vcpu on destroy - v2")
[ Added Fixes tag while picking -- Claudio ]
Message-ID: <20260803124040.126471-5-imbrenda@linux.ibm.com>
In some cases kvm_s390_vcpu_unsetup_cmma() can be called with a 0
cbrlo; in such cases, if running with V != R, free_page() will attempt
to free physical page 0.
Fix by freeing cbrlo only if it's non-zero.
Fixes: b31605c12f ("KVM: s390: make cmma usage conditionally")
Fixes: 29b40f105e ("KVM: s390: protvirt: Add initial vm and cpu lifecycle handling")
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-ID: <20260803124040.126471-4-imbrenda@linux.ibm.com>
If VM creation fails early in kvm_arch_init_vm(), the cleanup code
tries to free up the SCA, even though the address is 0. Due to using
free_pages_exact(), only the first page is skipped, accidentally
freeing pages 1, 2, and 3.
Fix by checking whether the pointer is NULL before attempting to free
the SCA in sca_dispose().
Fixes: e72753ed12 ("KVM: s390: Use ESCA instead of BSCA at VM init")
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-ID: <20260803124040.126471-3-imbrenda@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
The driver implements its own helper to select the performance level
corresponding to a requested baud rate. The helper duplicates
functionality already provided by geni_se_set_perf_level() in the GENI
core.
Replace the local implementation with the common helper and remove the
associated duplicate definitions and code. This consolidates
performance-level management in the GENI framework and reduces driver
specific code.
Signed-off-by: Praveen Talari <praveen.talari@oss.qualcomm.com>
Link: https://patch.msgid.link/20260801-reuse_common_geni_framework_helpers-v2-3-13753256ef71@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To manage GENI serial engine resources during runtime power
management, drivers currently need to call functions for ICC, clock,
and SE resource operations in both suspend and resume paths, resulting
in code duplication across drivers.
The new geni_se_resources_activate() and geni_se_resources_deactivate()
helper APIs addresses this issue by providing a streamlined method to
enable or disable all resources based, thereby eliminating redundancy
across drivers.
Signed-off-by: Praveen Talari <praveen.talari@oss.qualcomm.com>
Link: https://patch.msgid.link/20260801-reuse_common_geni_framework_helpers-v2-2-13753256ef71@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The UART driver maintains local helpers for resource and power-domain
initialisation that duplicate functionality already provided by the common
GENI framework.
Replace the driver-specific implementations with geni_se_resources_init()
and geni_se_domain_attach(), and use the power-domain list stored in
struct geni_se. This reduces code duplication and centralises GENI resource
management without functional changes.
Signed-off-by: Praveen Talari <praveen.talari@oss.qualcomm.com>
Link: https://patch.msgid.link/20260801-reuse_common_geni_framework_helpers-v2-1-13753256ef71@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
pl011_console_write_atomic() runs from nbcon atomic context, where
sleeping is not allowed. It calls clk_enable(), which takes the common-clk
enable_lock. Under PREEMPT_RT that is a sleeping lock:
clk_enable_lock() first tries spin_trylock_irqsave(), but on contention
falls back to spin_lock_irqsave(). Therefore, an atomic-context printk on
an RT kernel with a clk-backed pl011 can trip:
BUG: sleeping function called from invalid context at spinlock_rt.c:48
__might_resched from rt_spin_lock
rt_spin_lock from clk_enable_lock
clk_enable_lock from clk_enable
clk_enable from pl011_console_write_atomic
... from vprintk_emit
This was found and reproduced on PREEMPT_RT. Arm32 and arm64 DT SoCs are
affected; arm64 SBSA/ACPI has no clk, so clk_enable(NULL) short-circuits
before the lock. In addition, write_atomic() may be invoked from NMI
context and is documented to avoid locking. Removing clk_enable() from
the callback also avoids a potentially unsafe NMI acquisition of the
common-clock enable_lock.
An nbcon atomic-capable console must be printable from any context, so
the clock cannot be gated between writes. Enable the clock while the
console is available for output: use clk_prepare_enable() in
pl011_console_setup(), release it via clk_disable_unprepare() in the
console .exit() callback, and drop the per-write clk_enable()/clk_disable()
pairs from write_atomic() and write_thread().
When printk suspends consoles, drop the reference after
uart_suspend_port() stops console access and restore it before
uart_resume_port() -- but only if suspend actually marked the port
suspended (a wake-capable tty stays running and must keep its clock), and
keep it when console_suspend_enabled is false so no_console_suspend works.
The active power cost of keeping the clock enabled is platform-dependent:
none where the UART clock is a fixed always-on oscillator, real where it
is a gateable clock branch, which then cannot be gated (nor possibly can
its parent clocks) while the console is available for output. When serial
core actually suspends the port, the reference is released so the clock
provider can gate the clock tree.
Fixes: 2eb2608618 ("serial: amba-pl011: Implement nbcon console")
Suggested-by: John Ogness <john.ogness@linutronix.de>
Link: https://lore.kernel.org/all/8733xeaxix.fsf@jogness.linutronix.de/
Assisted-by: Claude:claude-fable-5
Signed-off-by: Karl Mehltretter <kmehltretter@gmail.com>
Link: https://patch.msgid.link/20260724213348.77418-3-kmehltretter@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
pl011_console_setup() calls clk_prepare() on the UART clock, but the
console provides no matching teardown, so the clock is never unprepared
when the console is unregistered -- via the sysfs "console" attribute or
a driver unbind. Each re-registration prepares the clock again, leaking
one prepare reference per cycle.
Even where preparing the clock has no hardware effect, the stale
reference leaves the clock framework's prepare count unbalanced. For
providers with prepare/unprepare operations or runtime-PM integration,
it may also retain resources after the console is unregistered.
Add a console .exit() callback that clk_unprepare()s the clock,
balancing the clk_prepare() in pl011_console_setup().
Fixes: 4b4851c65d ("clk: amba-pl011: convert to clk_prepare()/clk_unprepare()")
Assisted-by: Claude:claude-fable-5
Signed-off-by: Karl Mehltretter <kmehltretter@gmail.com>
Link: https://patch.msgid.link/20260724213348.77418-2-kmehltretter@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The AST2600 and AST2700 VUART controllers are identical to the AST2500
VUART controller.
Add the "aspeed,ast2600-vuart" and "aspeed,ast2700-vuart" compatible
strings and fall back to "aspeed,ast2500-vuart" for compatibility with
the existing driver.
Signed-off-by: Yu-Che Hsieh <yc_hsieh@aspeedtech.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260721-upstream-ast2700-vuart-support-v1-1-b4ed612b1aa2@aspeedtech.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Genio board DTs provide serial aliases for all enabled UARTs, but
the MTK 8250 driver still registered every port with the default line
number. If uart0 deferred and another UART probed first, the 8250 core
could still assign ttyS0 to the wrong port despite the DT aliases.
Read the serial alias during OF probe and seed uart.port.line before
registering the port so the 8250 core reserves the requested ttyS slot.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://patch.msgid.link/20260727-ccaione-genio-serial-aliases-v2-2-0f2ae41a8e89@baylibre.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On most MediaTek boards only serial0 is aliased, so the remaining
enabled uarts get first-free ttyS line numbers from the 8250 core in
probe order. When the console uart defers on its clocks another uart can
win line 0: console=ttyS0 then ends up on the wrong port and the boot
looks like a hang on the serial console, depending on probe order.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org> # kukui & asurada-hayato
Link: https://patch.msgid.link/20260727-ccaione-genio-serial-aliases-v2-1-0f2ae41a8e89@baylibre.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dmaengine_terminate_all() does not wait for a running callback, so the TX
callback can still touch the TX buffer after it is freed. The RX poll
timer reads the RX buffers without the port lock.
Switch to dmaengine_terminate_sync() and delete the RX timer before
freeing the buffers.
Fixes: ead76f329f ("ARM: 6763/1: pl011: add optional RX DMA to PL011 v2")
Cc: stable <stable@kernel.org>
Assisted-by: Codex:gpt-5.6
Signed-off-by: Fan Wu <fanwu01@zju.edu.cn>
Link: https://patch.msgid.link/20260731085915.326775-4-fanwu01@zju.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The RS485 trigger hrtimers are embedded in the devm-managed port and can
fire after it is freed. The IRQ handler can arm a timer, so free the IRQ
first and then cancel both timers.
Complete the RS485 stop without arming a timer, and cancel the timers
in remove() for the suspend-then-unbind path, where shutdown is not
called.
This issue was found by an in-house static analysis tool.
Fixes: 2c1fd53af2 ("serial: amba-pl011: Fix RTS handling in RS485 mode")
Cc: stable <stable@kernel.org>
Assisted-by: Codex:gpt-5.6
Signed-off-by: Fan Wu <fanwu01@zju.edu.cn>
Link: https://patch.msgid.link/20260731085915.326775-3-fanwu01@zju.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The RS485 stop hrtimer is used both to drain the transmitter and to wait
out delay_rts_after_send. The callback cannot tell the two apart, so it
restarts the post-send delay on every expiry and the timer never stops.
Add a WAIT_AFTER_SEND_DELAY state so its expiry ends the stop sequence
instead of restarting the delay.
Fixes: 2c1fd53af2 ("serial: amba-pl011: Fix RTS handling in RS485 mode")
Cc: stable <stable@kernel.org>
Assisted-by: Codex:gpt-5.6
Signed-off-by: Fan Wu <fanwu01@zju.edu.cn>
Link: https://patch.msgid.link/20260731085915.326775-2-fanwu01@zju.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
KDSKBMETA modifies keyboard meta mode but lacks the !perm check that all
other keyboard setter ioctls in vt_k_ioctl() enforce, allowing a process
to change meta mode on a non-controlling console without authorization.
Assisted-by: AISLE:Snapshot
Cc: stable <stable@kernel.org>
Signed-off-by: Joshua Rogers <linux@joshua.hu>
Link: https://patch.msgid.link/20260731-tty-vt-stuff-v1-2-be99b9da8e30@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kbd_keycode() reads vc->port.tty without acquiring a tty reference,
racing against con_shutdown() which clears port.tty under a different
lock. Use tty_port_tty_get()/tty_kref_put() to hold a proper reference
for the duration the tty pointer is needed.
Assisted-by: AISLE:Snapshot
Signed-off-by: Joshua Rogers <linux@joshua.hu>
Cc: stable <stable@kernel.org>
Link: https://patch.msgid.link/20260731-tty-vt-stuff-v1-1-be99b9da8e30@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The NXP LPC32xx UART (PORT_LPC3220) can latch an RX character-timeout
interrupt while the RX FIFO is empty: IIR reports UART_IIR_RX_TIMEOUT
(0x0c) but LSR.DR is clear. A character timeout is only cleared by
reading RHR, but serial8250_rx_chars() reads RHR only when LSR.DR is
set, so nothing ever clears the condition. The interrupt is
level-triggered and re-fires immediately, so on a single-core ARM926
the resulting interrupt storm livelocks the CPU.
It is reproducible when userspace repeatedly opens the front-panel port
(ttyS1): serial8250_do_set_termios() re-enables interrupts on unlock and
the handler then spins forever with iir=0xcc lsr=0x60 ier=0x05, tripping
the soft-lockup detector in serial8250_handle_irq_locked().
LPC32xx has no dedicated 8250 glue driver, it's driven by the generic
8250_of. Add a hardware specific handle_irq for PORT_LPC3220, wired up
in of_platform_serial_setup() the same way fsl8250_handle_irq is
installed. The handler follows dw8250_handle_irq(): on an RX timeout
with an empty FIFO (LSR.DR and LSR.BI clear) it does one throwaway RHR
read to clear the condition, then calls serial8250_handle_irq_locked().
No real received data is ever discarded, and it is a no-op on healthy
UARTs which never report a timeout with DR clear.
This is the same class of bug already worked around in other 8250 drivers;
see commit 424d79183a ("serial: 8250_dw: Avoid "too much work" from bogus rx timeout interrupt")
which reports the identical iir=0xcc/lsr=0x60. See also
UART_RX_TIMEOUT_QUIRK in 8250_omap, and the note in 8250_bcm7271.
Cc: stable <stable@kernel.org>
Assisted-by: Claude:Opus4.8
Signed-off-by: Ryan Wilbur <rwilbur633@gmail.com>
Link: https://patch.msgid.link/20260730193920.28954-1-rwilbur633@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The use in gnttab_map() is latently buggy, as "frames" there is
xen_pfn_t *, not unsigned long *. Adjust the correct use in
gnttab_map_frames_v2() as well, just to avoid the problematic pattern of
sizeof(<type>).
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Message-ID: <0ddff6c4-7ec7-41a9-9417-687ca16aaafd@suse.com>
ALC285_FIXUP_ASUS_GA605K_I2C_SPEAKER2_TO_DAC1 and
ALC285_FIXUP_SPEAKER2_TO_DAC1 are exactly the same. Remove the former to
avoid redundancy.
Signed-off-by: Eric Naim <dnaim@cachyos.org>
Link: https://patch.msgid.link/20260803091102.107570-10-dnaim@cachyos.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ALC294_FIXUP_ASUS_ALLY_SPEAKER is exactly the same as
ALC285_FIXUP_SPEAKER2_TO_DAC1. Remove the former to avoid redundancy.
Signed-off-by: Eric Naim <dnaim@cachyos.org>
Link: https://patch.msgid.link/20260803091102.107570-9-dnaim@cachyos.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Now that ALC285_FIXUP_YOGA_SPEAKER2_TO_DAC1 exists,
ALC285_FIXUP_SPEAKER2_TO_DAC1 can be unchained from
ALC269_FIXUP_THINKPAD_ACPI.
Signed-off-by: Eric Naim <dnaim@cachyos.org>
Link: https://patch.msgid.link/20260803091102.107570-8-dnaim@cachyos.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In preparation for unchaining ALC269_FIXUP_THINKPAD_ACPI from
ALC285_FIXUP_SPEAKER2_TO_DAC1, add
ALC285_FIXUP_YOGA_SPEAKER2_TO_DAC1 as a duplicate of
ALC285_FIXUP_SPEAKER2_TO_DAC1.
Signed-off-by: Eric Naim <dnaim@cachyos.org>
Link: https://patch.msgid.link/20260803091102.107570-7-dnaim@cachyos.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Now that ALC269_FIXUP_LIMIT_INT_MIC_BOOST is no longer chained to
ALC269_FIXUP_THINKPAD_ACPI, ALC269_FIXUP_STARLABS_LIMIT_INT_MIC_BOOST and
ALC269_FIXUP_LIMIT_INT_MIC_BOOST are both identical. Remove the former
and replace it with the latter to avoid redundancy.
Signed-off-by: Eric Naim <dnaim@cachyos.org>
Link: https://patch.msgid.link/20260803091102.107570-6-dnaim@cachyos.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Now that ALC269_FIXUP_LIMIT_INT_MIC_BOOST is no longer chained to
ALC269_FIXUP_THINKPAD_ACPI, ALC233_FIXUP_INTEL_NUC8_BOOST and
ALC269_FIXUP_LIMIT_INT_MIC_BOOST are both identical. Remove the former
and replace it with the latter to avoid redundancy.
Signed-off-by: Eric Naim <dnaim@cachyos.org>
Link: https://patch.msgid.link/20260803091102.107570-5-dnaim@cachyos.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
After creating ALC269_FIXUP_THINKPAD_LIMIT_INT_MIC_BOOST,
ALC269_FIXUP_LIMIT_INT_MIC_BOOST no longer needs to be chained to
ALC269_FIXUP_THINKPAD_ACPI and can be a generic quirk usable by all
devices.
Signed-off-by: Eric Naim <dnaim@cachyos.org>
Link: https://patch.msgid.link/20260803091102.107570-4-dnaim@cachyos.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add ALC269_FIXUP_THINKPAD_LIMIT_INT_MIC_BOOST, identical to
ALC269_FIXUP_LIMIT_INT_MIC_BOOST.
This prepares for removing the chain from
ALC269_FIXUP_LIMIT_INT_MIC_BOOST.
Signed-off-by: Eric Naim <dnaim@cachyos.org>
Link: https://patch.msgid.link/20260803091102.107570-3-dnaim@cachyos.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ALC294_FIXUP_CS35L41_I2C_2 is exactly the same as
ALC287_FIXUP_CS35L41_I2C_2, so remove the former and move existing
devices that previously used ALC294_FIXUP_CS35L41_I2C_2 to
ALC287_FIXUP_CS35L41_I2C_2.
Signed-off-by: Eric Naim <dnaim@cachyos.org>
Link: https://patch.msgid.link/20260803091102.107570-2-dnaim@cachyos.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This includes following USB4/Thunderbolt fixes:
- Correct DMA unmapping of USB4STREAM driver.
- Fix indexing of bandwidth groups.
- More bounds checking for DROM parsing.
- Fix ICM USB4 router operation messaging.
- Fix crash on ICM error path.
All these have been in linux-next with no reported issues.
-----BEGIN PGP SIGNATURE-----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=TCja
-----END PGP SIGNATURE-----
Merge tag 'thunderbolt-for-v7.2-rc7' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-linus
Mika writes:
thunderbolt: Fixes for v7.2-rc7
This includes following USB4/Thunderbolt fixes:
- Correct DMA unmapping of USB4STREAM driver.
- Fix indexing of bandwidth groups.
- More bounds checking for DROM parsing.
- Fix ICM USB4 router operation messaging.
- Fix crash on ICM error path.
All these have been in linux-next with no reported issues.
* tag 'thunderbolt-for-v7.2-rc7' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt:
thunderbolt: Initialize ->domain_released completion before it is being used
thunderbolt: icm: Preserve USB4 proxy data-valid bit
thunderbolt: Bound the DROM dual link port number before indexing sw->ports
thunderbolt: Fix bandwidth group reservation indexing
thunderbolt: stream: Unmap buffers with mapped size
Correct a few white-space issues, like double space after '=' character,
which will be flagged by dt-check-style. No functional changes.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260801195440.234183-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When creating a new vCPU, kvm_vm_ioctl_create_vcpu() will call
kvm_arch_vcpu_postcreate() after the file descriptor for the new vCPU
has been created. The new file descriptor has not been returned yet,
but a malicious userspace program could try to guess it.
If a malicious userspace program manages to start the newly created vCPU
before kvm_arch_vcpu_postcreate() is called, __vcpu_run() will try to
dereference vcpu->arch.gmap and trigger a NULL pointer dereference.
Fix this by adding a new field to struct kvm_vcpu_arch to keep track of
the initialization status of the vCPU. Refuse to run a vCPU that is not
fully initialized.
Fixes: dafd032a15 ("KVM: s390: move vcpu specific initalization to a later point")
Fixes: e38c884df9 ("KVM: s390: Switch to new gmap")
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-ID: <20260803124040.126471-2-imbrenda@linux.ibm.com>
The generic SPI controller binding allows GPIO-based chip selects, but
the MA35D1 QSPI driver currently supports only the controller's native
chip selects.
Disallow the cs-gpios property so that the binding matches the
functionality provided by the driver.
Signed-off-by: Chi-Wen Weng <cwweng@nuvoton.com>
Link: https://patch.msgid.link/20260803024048.1641756-1-cwweng.linux@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver sets acpi_device_name() and acpi_device_class() which are
never read afterward, so make it stop doing that and drop the symbols
defined specifically for this purpose.
No intentional functional impact.
This will facilitate the removal of device_name and device_class from
struct acpi_device_pnp in the future.
Signed-off-by: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Message-ID: <2384190.iZASKD2KPV@rafael.j.wysocki>
Correct a few white-space issues, like double space after '=' character,
which will be flagged by dt-check-style. No functional changes.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260801195425.234120-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When CONFIG_NFSD_V4_2_INTER_SSC is enabled, nfsd4_putfh() can return
success with fh_dentry and fh_export both NULL if fh_verify() returns
nfserr_stale and putfh->no_verify is true. The NFSD4_FH_FOREIGN flag
is set, but the compound dispatch loop only uses this flag to bypass
the nfserr_nofilehandle check -- it does not prevent subsequent ops
from running with a NULL fh_dentry.
A remote client can exploit this by crafting a COMPOUND that includes
an inter-SSC COPY (which causes check_if_stalefh_allowed() to set
no_verify=true on the saved PUTFH) with an additional op inserted
between the source PUTFH and SAVEFH. For example, SETATTR calls
fh_want_write() which dereferences fh_export->ex_path.mnt without
calling fh_verify() first, causing a NULL pointer dereference in the
nfsd kthread.
Fix this by gating the dispatch loop: when NFSD4_FH_FOREIGN is set
and fh_dentry is NULL, only OP_SAVEFH (needed for the inter-SSC flow)
and ops with ALLOWED_WITHOUT_FH (which don't need a resolved
filehandle) may proceed. All other ops receive nfserr_stale, per
RFC 7862 Section 15.2.3 which specifies that foreign filehandle
validation is deferred to the consuming operation and NFS4ERR_STALE
returned at that point.
Fixes: b9e8638e3d ("NFSD: allow inter server COPY to have a STALE source server fh")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-6
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://patch.msgid.link/20260527-putfh_foreign_fh_null_deref_consumers-v1-1-1b8a5aa28c59@kernel.org
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
sunrpc_destroy_cache_detail() only cancels the global cache_cleaner
delayed_work when cache_list is empty. During per-netns teardown
cache_list is never empty because init_net's caches remain registered,
so the cancel never fires. After unlink, the caller proceeds to
cache_destroy_net() which kfrees the cache_detail while cache_clean()
may still hold a dangling pointer to it. The result is a
use-after-free: cache_dequeue() takes cd->queue_lock on freed memory,
and cache_put() dereferences cd->cache_put as a function pointer from
freed slab.
Drop the list_empty guard so that cancel_delayed_work_sync() always
runs, ensuring any in-flight cache_clean() completes before the
cache_detail is freed. Re-arm the cleaner afterwards if other caches
are still registered.
Fixes: 820f9442e7 ("SUNRPC: split cache creation and PipeFS registration")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-6
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://patch.msgid.link/20260526-cache_cleaner_vs_destroy_no_sync-v1-1-a707a6fcfd32@kernel.org
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Individual Read segment lengths are validated at decode time, but
nothing prevents a requester from sending multiple segments whose
cumulative length exceeds the rq_pages array budget. When one
segment fills the page array exactly, the runtime guard in
svc_rdma_build_read_segment() is bypassed because len reaches zero.
A subsequent segment then accesses the NULL sentinel slot at
rq_pages[rq_maxpages], resulting in a NULL pointer dereference during
DMA mapping.
Accumulate pages across all Read segments and reject the message at
decode time when the total would overflow the page budget.
Fixes: 026d958b38 ("svcrdma: Add recvfrom helpers to svc_rdma_rw.c")
Cc: stable@vger.kernel.org
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
nfsd_break_one_deleg() sets NFSD4_CALLBACK_RUNNING via test_and_set_bit
at entry to serialize recall work, then calls nfsd4_run_cb() to queue
the recall. When the queue attempt fails the refcount bump is undone,
but the RUNNING bit is left set. The only site that clears the bit is
nfsd41_destroy_cb() (fs/nfsd/nfs4callback.c), which runs from the
workqueue and is therefore unreachable when nothing was queued.
The bit becomes a permanent latch on dp->dl_recall.cb_flags: every
subsequent break_lease() on the same delegation hits the early-return
guard in nfsd_break_one_deleg() and silently skips the recall, so the
delegation is never broken and the conflicting open or lock stalls.
Fix by clearing NFSD4_CALLBACK_RUNNING on the !queued branch alongside
the refcount_dec.
Fixes: 1054e8ffc5 ("nfsd: prevent callback tasks running concurrently")
Cc: stable@vger.kernel.org
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://patch.msgid.link/20260526-cb_recall_any_callback_running_stuck-v1-2-310011a028f3@kernel.org
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
deleg_reaper() sets NFSD4_CALLBACK_RUNNING before checking the
5-second rate limit and cl_cb_state gates. When either gate fires
the loop continues without queuing callback work, so the bit's only
clear site in nfsd41_destroy_cb() is never reached and RECALL_ANY
dispatch is permanently disabled for the affected client.
Move the test_and_set_bit() below both non-queueing gates so the
bit is taken only when nfsd4_run_cb() will be called.
Fixes: 424dd3df1f ("nfsd: eliminate cl_ra_cblist and NFSD4_CLIENT_CB_RECALL_ANY")
Cc: stable@vger.kernel.org
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://patch.msgid.link/20260526-cb_recall_any_callback_running_stuck-v1-1-310011a028f3@kernel.org
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
nfsd4_sequence() can free the very slot it is currently processing.
When the session shrinker has reduced se_target_maxslots below
se_fchannel.maxreqs, the shrink path checks three conditions before
calling free_session_slots():
1. se_target_maxslots < maxreqs (shrink was advertised)
2. slot->sl_generation == se_slot_gen (slot is up-to-date)
3. seq->maxslots <= se_target_maxslots (client acknowledges)
However, seq->slotid is never checked against se_target_maxslots.
A client using a slot in the range [se_target_maxslots, maxreqs) can
satisfy all three conditions: its slot has the current generation
(set by a prior SEQUENCE), and it sends sa_highest_slotid <=
se_target_maxslots to acknowledge the reduction.
free_session_slots() then kfrees every slot at index >=
se_target_maxslots, including the caller's own slot. The function
continues to write sl_seqid, sl_flags, sl_generation, and stores the
dangling pointer in cstate->slot. Later, nfsd4_store_cache_entry()
copies up to maxresp_cached bytes of the compound reply into the freed
sl_data[] array, corrupting whatever slab object now occupies that
address.
Additionally, a concurrent thread processing SEQUENCE on a different
high-numbered slot can have its slot freed out from under it.
NFSD4_SLOT_INUSE is set under nn->client_lock before the lock is
released, so any concurrent thread past SEQUENCE will have its slot
marked. However, free_session_slots() does not check NFSD4_SLOT_INUSE
before freeing.
Fix both problems by:
1. Checking that the current request's slotid is below the shrink
boundary.
2. Scanning slots in the to-be-freed range for NFSD4_SLOT_INUSE and
deferring the shrink if any are active.
Fixes: fc8738c68d ("nfsd: add support for freeing unused session-DRC slots")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-6
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://patch.msgid.link/20260526-nfsd4_sequence_shrink_uaf_on_loaded_slot-v2-1-74a89db0639e@kernel.org
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Read chunk position and length validation is currently scattered
across three consumer functions: svc_rdma_read_data_item(),
svc_rdma_read_multiple_chunks(), and svc_rdma_read_call_chunk().
Each independently guards against the same class of unsigned
arithmetic underflow from untrusted wire values. Any new consumer
of the parsed Read chunk list must replicate these checks or risk
re-introducing the defects fixed by earlier patches in this series.
Add pcl_check_read_chunk_positions() to consolidate position and
length validation into a single post-decode pass, called from
svc_rdma_xdr_decode_req() after all three chunk lists have been
parsed and the inline body length is known. The pass verifies
three properties:
- Each Read chunk's inline-body offset (its unreduced-stream
position minus the cumulative length of preceding Read chunks)
falls within the inline body length, or within the Call chunk
length for interleaved reads.
- Adjacent Read chunk positions do not overlap: cumulative read
bytes at each transition do not exceed the next position.
- Each chunk length does not exceed the receive context's page
budget.
Malformed frames are rejected before reaching any consumer. The
existing consumer-side guards remain as defense in depth.
Acked-by: Jeff Layton <jlayton@kernel.org>
Link: https://patch.msgid.link/20260526-rpc-kernel-bugs-v1-6-e251306ccca9@oracle.com
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
A peer can send a Write or Reply chunk whose segcount field is zero.
xdr_check_write_chunk() only rejects segcount > rc_maxpages, so zero
passes the range check, and xdr_inline_decode(stream, 0) returns the
current (non-NULL) cursor without advancing. The function returns
true and pcl_alloc_write() then links a struct svc_rdma_chunk with
ch_segcount == 0 onto rc_write_pcl or rc_reply_pcl.
An earlier patch in this series made pcl_for_each_segment() safe for
ch_segcount == 0, so this no longer drives the memory walk it used
to. Rejecting the malformed frame at the decode boundary is still
worthwhile as defense in depth: it keeps degenerate zero-segment
chunks off the parsed chunk lists entirely, so any future consumer
that walks ch_segments directly cannot observe one, and it makes the
zero-floor easy to backport to trees where the macro change is more
intrusive. RFC 8166 has no meaning for a Write/Reply chunk that
describes no remote buffer, so no legitimate client is affected.
xdr_check_reply_chunk() funnels Reply chunks through
xdr_check_write_chunk() and inherits the same rejection.
pcl_alloc_write() also links each chunk onto the parsed chunk list
before filling its segment array. If a future change weakens the
segcount-0 rejection, an incomplete chunk is visible to consumers
during the fill loop. Reorder so that list_add_tail() follows the
segment fill loop, ensuring only fully-populated chunks appear on
the list.
Fixes: 78147ca8b4 ("svcrdma: Add a "parsed chunk list" data structure")
Cc: stable@vger.kernel.org
Assisted-by: kres (claude-opus-4-7)
Signed-off-by: Chris Mason <clm@meta.com>
Acked-by: Jeff Layton <jlayton@kernel.org>
Link: https://patch.msgid.link/20260526-rpc-kernel-bugs-v1-5-e251306ccca9@oracle.com
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
When a parsed chunk list contains a chunk whose ch_segcount is zero,
pcl_for_each_segment computes its inclusive upper bound as
&chunk->ch_segments[ch_segcount - 1]. ch_segcount is u32, so the
subtraction wraps to 0xFFFFFFFF and the bound lands far past the
ch_segments flex array. The loop body then walks unrelated memory at
sizeof(struct svc_rdma_segment) stride until it faults.
A zero-segcount chunk is reachable from the wire:
xdr_check_write_chunk() only rejects segcount values greater than
rc_maxpages, and pcl_alloc_write() links a freshly allocated chunk
onto rc_write_pcl/rc_reply_pcl before its segment-fill loop runs,
so a Write or Reply chunk advertising zero segments leaves
ch_segcount == 0 on the list. When the transport has negotiated
Send-With-Invalidate, svc_rdma_get_inv_rkey() iterates all four
PCLs with pcl_for_each_segment and dereferences segment->rs_handle
on each iteration, turning the underflow into an out-of-bounds read
and a general protection fault.
xdr_check_write_list / xdr_check_reply_chunk
pcl_alloc_write()
chunk = pcl_alloc_chunk(...) /* ch_segcount = 0 */
list_add_tail(&chunk->ch_list, &pcl->cl_chunks)
/* fill loop iterates zero times for wire segcount 0 */
svc_rdma_get_inv_rkey()
pcl_for_each_chunk(rc_write_pcl)
pcl_for_each_segment(segment, chunk)
pos <= &ch_segments[0u - 1u] /* 0xFFFFFFFF */
segment->rs_handle /* OOB read -> GPF */
Fix by switching the macro to a half-open upper bound that uses
ch_segcount directly. For ch_segcount == 0 the loop start equals the
loop end and the body is skipped; for ch_segcount > 0 the iteration
range is unchanged. All six existing call sites in
net/sunrpc/xprtrdma/svc_rdma_recvfrom.c and
net/sunrpc/xprtrdma/svc_rdma_rw.c remain correct under the new bound,
so no caller changes are needed.
Fixes: 78147ca8b4 ("svcrdma: Add a "parsed chunk list" data structure")
Cc: stable@vger.kernel.org
Assisted-by: kres (claude-opus-4-7)
Signed-off-by: Chris Mason <clm@meta.com>
Acked-by: Jeff Layton <jlayton@kernel.org>
Link: https://patch.msgid.link/20260526-rpc-kernel-bugs-v1-4-e251306ccca9@oracle.com
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The RPC/RDMA Read list decoder stores wire-supplied segment
lengths without validation. xdr_count_read_segments() checks
4-byte alignment for non-zero position values but does not
cap the segment length.
An oversized rs_length reaches svc_rdma_build_read_segment(),
which derives nr_bvec from it and can drive a large dynamic
bvec allocation before verifying that enough rq_pages remain.
If the post-allocation page-overrun guard fires, the freshly
acquired rw context is not returned, leaking the resource.
Reject any segment whose length exceeds the receive context's
page budget during Read list decoding, consistent with how
xdr_check_write_chunk() bounds Write segment counts against
rc_maxpages. Also return the rw context on the existing
post-allocation overrun path in svc_rdma_build_read_segment(),
keeping that defensive guard balanced.
Fixes: 5ee62b4a91 ("svcrdma: use bvec-based RDMA read/write API")
Cc: stable@vger.kernel.org
Acked-by: Jeff Layton <jlayton@kernel.org>
Link: https://patch.msgid.link/20260526-rpc-kernel-bugs-v1-3-e251306ccca9@oracle.com
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
svc_rdma_read_chunk_range() walks a Read chunk's segment list to
build a sub-range starting at byte offset and spanning length bytes
for a Position-Zero or Call chunk. Two arithmetic defects in the
per-segment loop produce wrong DMA lengths and a u32 underflow:
pcl_for_each_segment(segment, chunk) {
if (offset > segment->rs_length) {
offset -= segment->rs_length;
continue;
}
dummy.rs_handle = segment->rs_handle;
dummy.rs_length = min_t(u32, length,
segment->rs_length) - offset;
dummy.rs_offset = segment->rs_offset + offset;
First, the skip predicate uses '>' instead of '>='. When offset
equals the segment's full rs_length, the segment is fully consumed
and should be skipped, but the loop falls through into the body.
The resulting dummy.rs_length is min_t(u32, length, rs_length) -
rs_length, which underflows to a near-UINT_MAX u32 when length is
smaller than rs_length, or is zero otherwise.
Second, the length formula subtracts offset from the min_t() result
rather than from segment->rs_length before the cap. For offset > 0
the segment's residual is rs_length - offset, not rs_length, so the
cap must be applied to the residual. With the current bracketing,
whenever length is smaller than rs_length - offset the per-segment
length becomes length - offset instead of length, silently dropping
offset bytes from the rebuilt chunk. Combined with the boundary
case above it also enables the u32 underflow path, which propagates
a huge nr_bvec into svc_rdma_build_read_segment() and a multi-MiB
kmalloc_array_node() in svc_rdma_get_rw_ctxt().
Additionally, svc_rdma_read_call_chunk() can invoke this function
with length == 0 when the last Read chunk ends exactly at the end
of the Call chunk. With the corrected >= predicate, every segment
is skipped and the function returns the initial -EINVAL, rejecting
a valid request. Return success immediately when length is zero.
Also break out of the loop once length is fully consumed to avoid
passing zero-length segments to svc_rdma_build_read_segment().
Fix by using '>=' so a fully-consumed segment is skipped, by
moving '- offset' inside min_t() so the cap is applied to the
segment's residual length, by returning success for zero-length
requests, and by stopping iteration when the requested range has
been consumed.
Fixes: d7cc739726 ("svcrdma: support multiple Read chunks per RPC")
Cc: stable@vger.kernel.org
Assisted-by: kres (claude-opus-4-7)
Signed-off-by: Chris Mason <clm@meta.com>
Acked-by: Jeff Layton <jlayton@kernel.org>
Link: https://patch.msgid.link/20260526-rpc-kernel-bugs-v1-2-e251306ccca9@oracle.com
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The RPC/RDMA Read chunk position field is supplied by the remote
client and stored verbatim in the parsed chunk list.
xdr_count_read_segments() checks only 4-byte alignment; it never
compares the position against the received inline body length.
In the single-chunk path, svc_rdma_read_complete_one() splits the
head and tail kvecs at ch_position. A position past the inline
body underflows the tail length, exposing adjacent slab memory to
the upper XDR decoder.
In the multi-chunk path, svc_rdma_read_multiple_chunks() computes
gap lengths between chunks as unsigned subtractions from
ch_position. Overlapping Read chunks cause these subtractions to
underflow. A final position past the inline body likewise
underflows the trailing gap length. svc_rdma_copy_inline_range()
then copies past the receive buffer into request pages that are
returned to the client through the Reply channel.
Bound inline-range copies in svc_rdma_copy_inline_range() against
the decoded inline RPC body saved in rc_saved_arg. Reject a
single Read chunk positioned beyond that body, and reject
multi-chunk lists where accumulated read bytes exceed the next
chunk's position. Apply the same position and overlap checks in
the call-chunk interleaving path.
Fixes: d96962e6d0 ("svcrdma: Use the new parsed chunk list when pulling Read chunks")
Cc: stable@vger.kernel.org
Acked-by: Jeff Layton <jlayton@kernel.org>
Link: https://patch.msgid.link/20260526-rpc-kernel-bugs-v1-1-e251306ccca9@oracle.com
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
nfsd4_drop_revoked_stid() handles FREE_STATEID for admin-revoked
delegations but does not set SC_STATUS_FREED before releasing cl_lock.
revoke_delegation() uses this flag to detect whether FREE_STATEID has
already processed the delegation -- without it, the freed delegation is
added to cl_revoked via list_add(), producing a use-after-free when
cl_revoked is later traversed in __destroy_client().
The SC_STATUS_REVOKED path in nfsd4_free_stateid() (line 7983) already
sets SC_STATUS_FREED correctly. Apply the same pattern to the
SC_STATUS_ADMIN_REVOKED path in nfsd4_drop_revoked_stid().
Fixes: 8dd91e8d31 ("nfsd: fix race between laundromat and free_stateid")
Cc: stable@vger.kernel.org
Signed-off-by: Zhenghang Xiao <kipreyyy@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Link: https://patch.msgid.link/20260526104554.46262-1-kipreyyy@gmail.com
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
