Avoid using the default fuse instance in suspend/resume callbacks, as it
always runs the suspend/resume callbacks for the default instance rather
than the device’s own.
Get the correct fuse instance by using `dev_get_drvdata()`.
Signed-off-by: Kartik Rajput <kkartik@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
During hw_params call we make sure that the host DMA is stopped but the
hstream->running flag is not explicitly cleared at the same time.
If the host DMA fails to stop during previous use then the flag is left
set and on next start the host DMA will be left disabled since the
trigger:STOP will skip the DMA enable.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20260730122241.30541-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fuse values are static and device-unique but not secret. Using them as an
entropy source weakens the overall randomness pool because the data is
constant and externally observable over the device’s lifetime.
Stop feeding fuse data into the kernel’s randomness subsystem.
Signed-off-by: Kartik Rajput <kkartik@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Unlike older GIC variants, the GICv3 DT bindings do not support
specifying a CPU mask in PPI interrupt specifiers. Drop the masks.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
While the GCC and Clang compilers already define __ASSEMBLER__
automatically when compiling assembly code, __ASSEMBLY__ is a
macro that only gets defined by the Makefiles in the kernel.
This can be very confusing when switching between userspace
and kernelspace coding, or when dealing with uapi headers that
rather should use __ASSEMBLER__ instead. So let's standardize now
on the __ASSEMBLER__ macro that is provided by the compilers.
This is a completely mechanical patch (done with a simple "sed -i"
statement).
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add initial device tree support for the Lenovo ThinkEdge SE70, an
industrial edge gateway based on the NVIDIA Jetson Xavier NX module
(P3668-0001) with a custom carrier board.
This initial submission includes:
- 40-pin expansion header pinmux configuration
- External Micro SD card slot with dedicated 3.3V regulator
- I2C bus for 40-pin header
Static verification passed: dt_binding_check and dtbs compilation
complete without errors.
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Jiqi Li <lijq9@lenovo.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add the three pin controller (MAIN, UPHY, AON) device-tree nodes found on
Tegra264.
Signed-off-by: Prathamesh Shete <pshete@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The CMDQV interrupts on Tegra264 are described as level-triggered, but
per the hardware interrupt documentation these interrupts are actually
edge-triggered.
Correct the interrupt type for all CMDQV nodes from IRQ_TYPE_LEVEL_HIGH
to IRQ_TYPE_EDGE_RISING.
Fixes: fe57d0ac48 ("arm64: tegra: Add nodes for CMDQV")
Reported-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Ashish Mhetre <amhetre@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
We always sort by unit-address and fallback to alphanumeric sorting for
nodes that don't have a unit-address.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Tegra264 has a host1x instance with a VIC (video image compositor).
Other multimedia engines have moved outside host1x. Stream IDs are
now namespaced by device rather than being defined globally --
however, the only engine we have using context isolation is VIC so
we only define VIC's range of context devices.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add the remaining 12 CPU nodes and all 14 L2 cache nodes for the
Tegra264 CPU Complex, which comprises up to 14 ARM Neoverse V3AE
CPUs. Each CPU has its own private 1MB L2 cache.
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Enable GPCDMA in Tegra264 and add the iommu-map property so that each
channel uses a separate stream ID and gets its own IOMMU domain for
memory.
Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Lenovo ThinkEdge SE70 is a fanless industrial edge gateway carrier
board based on NVIDIA Tegra194 (Xavier NX) SOM.
Add the corresponding compatible string for device tree validation.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Jiqi Li <lijq9@lenovo.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
tegra114_gic_cpu_pm_registration() and tegra_init_irq() use
of_find_matching_node() for temporary IRQ init lookups, but the helper
returns a referenced node even when the result is used only as a boolean
or as an of_iomap() input.
Use scoped device_node cleanup for both lookups so the references are
dropped when the functions return.
Fixes: 7e8b15dbc3 ("ARM: tegra114: Reprogram GIC CPU interface to bypass IRQ on CPU PM entry")
Fixes: e9479e0e83 ("ARM: tegra: skip gic_arch_extn setup if DT has a LIC node")
Signed-off-by: Yuho Choi <dbgh9129@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
selinux_inode_init_security() marks the isec as initialized before
checking if mount labeling is supported (SBLABEL_MNT). This was fine
until commit 9722955b54 ("bpf: Add simple xattr support to bpffs"),
where genfscon bpffs mounts fail the SBLABEL_MNT check as expected (no
xattrs) and yet leave the isec->initialized. This breaks subsequent
calls to inode_doinit_with_dentry().
Do the SBLABEL_MNT check before the inode security is initialized.
Cc: stable@vger.kernel.org
Closes: https://lore.kernel.org/all/akWdcp6P0FkNDzBk@google.com/
Fixes: 9722955b54 ("bpf: Add simple xattr support to bpffs")
Acked-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
bui duc phuc <phucduc.bui@gmail.com> says:
This series is the final part of the cleanup to convert ASoC codec
drivers to use the guard() and scoped_guard() helpers for mutex and
spinlock handling.
Compile-tested only.
Link: https://patch.msgid.link/20260731030648.8706-1-phucduc.bui@gmail.com
Clean up the code using guard() for mutex locks.
Merely code refactoring, and no behavior change.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20260731030648.8706-27-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Clean up the code using guard() for mutex locks.
Merely code refactoring, and no behavior change.
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20260731030648.8706-26-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Clean up the code using guard() for mutex locks.
Merely code refactoring, and no behavior change.
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20260731030648.8706-25-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Clean up the code using guard() for mutex locks.
Merely code refactoring, and no behavior change.
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20260731030648.8706-24-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Clean up the code using guard() for mutex locks.
Merely code refactoring, and no behavior change.
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20260731030648.8706-23-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Clean up the code using guard() for mutex locks.
Merely code refactoring, and no behavior change.
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20260731030648.8706-22-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Clean up the code using guard() for mutex locks.
Merely code refactoring, and no behavior change.
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20260731030648.8706-21-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Clean up the code using guard() for mutex locks.
Merely code refactoring, and no behavior change.
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20260731030648.8706-20-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Clean up the code using guard() for mutex locks.
Merely code refactoring, and no behavior change.
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20260731030648.8706-19-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Clean up the code using guard() for mutex locks.
Merely code refactoring, and no behavior change.
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20260731030648.8706-18-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Clean up the code using guard() for mutex & spin locks.
Merely code refactoring, and no behavior change.
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20260731030648.8706-17-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Clean up the code using guard() for mutex locks.
Merely code refactoring, and no behavior change.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20260731030648.8706-16-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Clean up the code using guard() for mutex locks.
Merely code refactoring, and no behavior change.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20260731030648.8706-15-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Clean up the code using guard() for mutex locks.
Merely code refactoring, and no behavior change.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20260731030648.8706-14-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Clean up the code using guard() for mutex locks.
Merely code refactoring, and no behavior change.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20260731030648.8706-13-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Clean up the code using guard() for mutex locks.
Merely code refactoring, and no behavior change.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20260731030648.8706-11-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Clean up the code using guard() for mutex locks.
Merely code refactoring, and no behavior change.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20260731030648.8706-10-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Clean up the code using guard() for mutex locks.
Merely code refactoring, and no behavior change.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20260731030648.8706-9-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Clean up the code using guard() for mutex & spin locks.
Merely code refactoring, and no behavior change.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20260731030648.8706-8-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Clean up the code using guard() for mutex locks.
Merely code refactoring, and no behavior change.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20260731030648.8706-7-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Clean up the code using guard() for mutex locks.
Merely code refactoring, and no behavior change.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20260731030648.8706-6-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Clean up the code using guard() for mutex locks.
Merely code refactoring, and no behavior change.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20260731030648.8706-5-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Clean up the code using guard() for mutex locks.
Merely code refactoring, and no behavior change.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20260731030648.8706-4-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Clean up the code using guard() for mutex locks.
Merely code refactoring, and no behavior change.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20260731030648.8706-3-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Clean up the code using guard() for mutex locks.
Merely code refactoring, and no behavior change.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20260731030648.8706-2-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cn10k_ddr_perf_remove() did not cancel the poll hrtimer before returning.
If the device was unbound while perf events were still active the timer
callback could run post-free.
To fix the issue by adding hrtimer_cancel() in remove().
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Will Deacon <will@kernel.org>
The CN20K DRAM Subsystem exposes eight programmable
performance counters and two fixed counters for DDR
read and write traffic. Software selects events for
the programmable counters from traffic at the DDR PHY
interface, the CHI interconnect, or inside the DDR controller.
Add CN20K register offsets, event maps, and sysfs attributes;
match the device via OF (marvell,cn20k-ddr-pmu) and ACPI (MRVL000B).
Represent the SoC variant in platform data with bit flags so
CN20K can reuse the CN10K PMU code path where appropriate.
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Will Deacon <will@kernel.org>
Marvell CN20K SoCs integrate a DDR Performance Monitoring Unit (PMU)
associated with the DDR controller. The block provides hardware counters
to monitor DDR traffic and performance events and is accessed via a
dedicated MMIO region.
The CN20K DDR PMU is functionally equivalent to the CN10K DDR PMU, with
minor register offset differences.
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Ignore IPC errors for pipeline state change if the firmware state is
crashed or the IPC has timed out.
If the firmware has crashed the kernel still needs to go through the state
changes to reset its internal to be able to correctly work the next time
the DSP is booted up.
The case with IPC timeout is a bit more problematic, but it has been
rootcaused to be the result of system scheduling blockage and the firmware
did actually received and handled the message, but the reply handling got
blocked by issues outside of the SOF stack.
So far the best way to handle this is to continue with setting the state.
Fixes: c40aad7c81 ("ASoC: SOF: ipc4-pcm: Workaround for crashed firmware on system suspend")
Cc: stable@vger.kernel.org
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://patch.msgid.link/20260730112343.26687-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Block device buffered reads and writes already pass through
filemap_read() and iomap_file_buffered_write() respectively, both of
which handle IOCB_DONTCACHE. Enable RWF_DONTCACHE for block device files
by setting FOP_DONTCACHE in def_blk_fops.
For CONFIG_BUFFER_HEAD=y, writeback goes through buffer_head's
__bh_submit() which sets BIO_COMPLETE_IN_TASK on dropbehind folios. For
CONFIG_BUFFER_HEAD=n, writeback goes through iomap which handles it via
BIO_COMPLETE_IN_TASK on the ioend bio.
This support is useful for databases that operate on raw block devices,
among other userspace applications.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Tal Zussman <tz2294@columbia.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20260730-blk-dontcache-v7-5-3e8e6850068d@columbia.edu
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Set BIO_COMPLETE_IN_TASK in __bh_submit() for write bios when the folio
has dropbehind set, so that buffer_head writeback completions get
deferred to task context where folio_end_dropbehind() can safely
invalidate folios.
Read completions are not deferred since dropbehind invalidation for
reads is handled synchronously by the reader.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Tal Zussman <tz2294@columbia.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20260730-blk-dontcache-v7-4-3e8e6850068d@columbia.edu
Signed-off-by: Jens Axboe <axboe@kernel.dk>
