The Renesas R-Car ISP block consists of two different IP blocks, one
CSI-2 Channel Selector (CSISP) and one traditional ISP for image
operation (ISPCORE). The R-Car ISP driver currently supports the CSISP
functionality as part of the video capture pipeline, this change adds
support for the ISPCORE functionality.
The ISPCORE functionality is further split in two parts, a Renesas
specific part and a Dream Chip Real-time Pixel Processor IP part
(RPPX1). The Renesas part deals with I/O to/from the block while the
RPPX1 part deals with the actual ISP functions.
The RPPX1 functionality is implemented in a support framework (DCT
RPPX1) as this block can be used by different vendors or setups. This
change deals with the Renesas part of exposing the V4L2 elements needed
for a user-space interface to the RPPX1 and deals with the DMA to/from
the RPP block. It also facilitates the user-space V4L2 API to allow
configuring the RPPX1 using the DCT RPPX1 support framework.
The functionality exposed are one input video device where RAW bayer
frames can be queued for processing, one output video device where the
debayerd image can be read as either ABGR32 or NV16M format. Further
more a video device to queue the image processing parameters to
configure the RPPX1 IPS as well as a video device to read statistics
about the processed image is available.
There is no change in the operation of the CSISP functionality.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
[ VSPX interfacing + locking sanitizing ]
Co-developed-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Add a framework driver for Dreamchip RPPX1 ISP. The driver aims to
provide a framework for other V4L2 based drivers to drive the RPPX1
functionality. The reason for this split is that the RPPX1 IP itself do
not provide any DMA engines to drive data to/from the device, instead it
depends on other IP blocks to implement these features.
While the peripherals around the RPPX1 ISP used in different designs and
by different vendors are different the RPPX1 core itself is the same.
For this reason the framework solution to be able to split the Dreamchip
RPPX1 driver from vendors usage of it have been picked in hope to reduce
duplication of the common parts.
The design is to try and keep the surface of this framework as small as
possible. The intention of this change is to be able to fill all needs
of this.
* Two functions to create and destroy a RPPX1 instance, rppx1_create()
and rppx1_destory(). These are intended to be called in the users
probe and remove code paths.
* Two functions to start and stop the RPPX1 processing, rppx1_start()
and rppx1_stop(). These are intended to be called in the users
stream on and stream off code paths.
* One function to ask the RPPX1 to process parameters buffer prepared
by user space, rppx1_params(). The intention is to call this
function when the parameter buffer is queued to the V4L2 driver and
the result stored by the driver until the time it needs to be
written to the RPPX1. It's the users responsibility to write it
either using MMIO or other means.
* One function to fill in a statistic buffer based on the current
status of the RPPX1, rppx1_stats_fill_isr(). The intention is that
the user call's this in its interrupt handler when it knows the
RPPX1 is done processing a frame.
* One function to ack and retrieve the interrupts generated by the
RPPX1, rppx1_interrupt(). The intention is to call this function
when the users interrupt handler detects the RPPX1 have raised and
interrupt. There is no need for the user to understand, or act, on
the actual RPPX1 interrupt, but it can if it wants too.
The initial support in the framework is limited and do not implement any
ISP processing algorithms other then configuring the RPPX1 to process
any Bayer (8-, 10, or 12-bit) image and produce either a RGB or YUYV
output. It do however probe all function blocks of the RPPX1 and provide
an interface to interact with both parameter and statistic bufferers.
The user of the framework will not change as algorithms for the
different function blocks of the ISP are being added.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Co-developed-by: Jai Luthra <jai.luthra+renesas@ideasonboard.com>
Signed-off-by: Jai Luthra <jai.luthra+renesas@ideasonboard.com>
Co-developed-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Add the scaffolding for the parameters and statistics buffers for
Dreamchip RPPX1. The parameters for each ISP function block will be
added together with the logic for it.
In addition to the scaffolding add a common struct that describes the
measurement window. This struct is not specific to any block and will
used by many of them.
Signed-off-by: Jai Luthra <jai.luthra@ideasonboard.com>
[Niklas: Commit message]
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Register V4L2 metadata fourcc codes for the Dreamchip RPP-X1 ISP
parameters and statistics buffers. These formats are used by the driver
to exchange ISP configuration and 3A statistics with userspace through
the extensible parameters framework.
Signed-off-by: Jai Luthra <jai.luthra+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Add two helper functions to v4l2-isp to handle statistics:
- v4l2_isp_stats_init_buffer() to initialize a statistics buffer
- v4l2_isp_stats_init_block() to initialize a statistics block in the
next available memory location of a buffer
The v4l2_isp_stats_init_buffer() resets the data size counter of the
buffer and initializes its 'version' field.
The v4l2_isp_stats_init_block() helper accepts the type of the stats
block about to be populated, an array of per-block-type information and
the maximum size of the v4l2-isp buffer. If enough space for the new
block is available, the function increments the
v4l2_isp_buffer.data_size counter, initializes the new stats block
header and returns a pointer to the block for the driver to populate it.
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Use the newly introduced per-block validation in v4l2-isp framework to
implement a validation callback for the AWB and AE configuration blocks
to make sure the configured metering zones do not exceed the hardware
capabilities.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Drivers are expected to provide to the helper function
v4l2_isp_params_validate_buffer() a list of 'struct
v4l2_isp_params_block_type_info' entries, one for each supported ISP block.
The type 'struct v4l2_isp_params_block_type_info' so far only contained the
expected block size for the core framework to validate the declared block
size against the expected one.
For some blocks, drivers might want to implement more precise per-block
validations. Add a function pointer member to 'struct
v4l2_isp_params_block_type_info' to allow drivers to register a callback
and call it from the core framework during validation.
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Rename v4l2_isp_params_buffer_size() to v4l2_isp_buffer_size() to
support statistics.
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Rework the userspace-api documentation of V4L2 ISP to support
statistics.
Update all occurences of 'v4l2_isp_param' types to match the uAPI
changes and add a section to document the statistics serialization
format.
Signed-off-by: Antoine Bouyer <antoine.bouyer@nxp.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
[Update on uAPI changes]
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Extend the v4l2-isp extensible format introduced for isp parameters buffers
to the support buffers of ISP statistic.
Like for ISP configuration purpose, that will help supporting various ISP
hardware versions reporting different statistics data with less impact on
userspace.
Rename all 'v4l2_isp_params' types to generic 'v4l2_isp' types to
prepare to use them for statistics as well and maintain the existing
types for compatibility with existing userspace only.
Signed-off-by: Antoine Bouyer <antoine.bouyer@nxp.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
[Rework to remove 'v4l2_isp_stats' and unify types]
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Each int3472_gpio_map entry currently maps exactly one ACPI HID to a
GPIO quirk. As more sensors needing the same quirk are identified, this
means adding a full duplicate table entry per HID, differing only in
the HID string, which does not scale.
Change int3472_gpio_map::hid to a NULL-terminated hids array so a
single entry can match any number of ACPI HIDs, letting new HIDs be
added to the relevant array instead of duplicating quirk entries.
Cc: linux-media@vger.kernel.org
Suggested-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Tarang Raval <tarang.raval@siliconsignals.io>
Tested-by: Kate Hsuan <hpa@redhat.com>
Reviewed-by: Kate Hsuan <hpa@redhat.com>
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
The HM1092 is a mono IR sensor used for face unlock on Intel IPU6 and
IPU7 laptops. Without an entry here the sensor endpoint is built with no
link-frequencies property, the driver rejects every mode and the sensor
never binds.
Two frequencies are listed because the sensor is driven from a different
external clock depending on the platform, with the PLL programmed to
match: 180480000 Hz on Dell (19.2 MHz EXTCLK) and 180000000 Hz on ASUS
(24 MHz).
Assisted-by: Claude:claude-opus-5
Signed-off-by: Jake Steinman <j@metarealtyinc.ca>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Unlike the channel_program struct, which covers synchronous I/O
submissions and asynchronous interrupts, the CRW region relies
exclusively on asynchronous events coming from hardware.
Implement a lock to manage the list of those payloads, to ensure
they are read cohesively.
Fixes: 3f02cb2fd9 ("vfio-ccw: Wire up the CRW irq and CRW region")
Cc: stable@vger.kernel.org
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
The io_mutex was defined to serialize the io_regions, but then has
also sort of been associated with the I/O themselves because of
the close relationship they share.
With the handful of races that are possible, the choices are either to:
A) expand the scope of io_mutex to close these remaining windows, or
B) reduce the scope of io_mutex to just io_region, and introduce a new
lock mechanism for the remaining I/O resources
This patch implements A, since B brings with it a lot more interactions
that would need to be tracked and kept in a correct hierarchy. It also
takes advantage of the workqueue element for cp_free() that now gets
called out of fsm_notoper(), which could be invoked out of an interrupt
context and thus cannot acquire a mutex itself.
Fixes: 4f76617378 ("vfio-ccw: protect the I/O region")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
The fsm_notoper() routine is called when the device has been
lost, and is (by definition) no longer operational. Since this
can happen asynchronously from the normal behavior of the
driver, the cleanup may happen when holding other locks
in the calling sequence (notably, the cio subchannel lock).
Push the cleanup of the private->cp resources to a workqueue,
where it can be done out from under that lock sequence and
a future patch can safely manage the locking requirements.
Fixes: 204b394a23 ("vfio/ccw: Move FSM open/close to MDEV open/close")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
The initialization of the io_work and crw_work workqueues begs the
question of whether they should be un-initialized. Add the corresponding
cleanup tags in _release_dev to ensure work isn't dispatched after
the private struct is free'd.
Suggested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Fixes: e5f84dbaea ("vfio: ccw: return I/O results asynchronously")
Fixes: 3f02cb2fd9 ("vfio-ccw: Wire up the CRW irq and CRW region")
Cc: stable@vger.kernel.org
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
The introduction of the capability chain rightly clamped the
region indexes to the range of the capabilities itself, but
neglected to do so for the existing read/write regions which
should also be enforced.
Fixes: db8e5d17ac ("vfio-ccw: add capabilities chain")
Cc: stable@vger.kernel.org
Cc: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Sashiko pointed out that get_guest_idal() unconditionally calculates
the length of the IDAL presuming everything is a Format-2 IDAW.
The output of vfio-ccw is always Format-2, but the input can be either
Format-1 (31-bit addresses) or Format-2 (64-bit addresses). As a result,
the size of the guest IDAL may be incorrect and should be trimmed down.
Reported-by: sashiko-bot <sashiko-bot@kernel.org>
Link: https://lore.kernel.org/r/20260720203400.7328E1F000E9@smtp.kernel.org/
Fixes: 1b676fe3d9 ("vfio/ccw: handle a guest Format-1 IDAL")
Cc: stable@vger.kernel.org
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
The first IDAW in a list does not need to be on a 2K/4K boundary
like all others, and so is read separately to accurately calculate
the size of the buffer needed to read the full IDAL.
Verify that the address found in the first IDAW is unchanged between
reads, to ensure a consistent set of IDAWs being worked with.
Fixes: 01aa26c672 ("s390/cio: Combine direct and indirect CCW paths")
Cc: stable@vger.kernel.org
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
The routine ccwchain_calc_length() counts the number of channel
command words (CCWs) that are chained together in a single channel
program, and rejects anything larger than CCWCHAIN_LEN_MAX (256) CCWs.
The loop itself is "do..while (count < 257)", and while the logic in
is_cpa_within_range() correctly adjusts between the 0-index array of
CCWs and the count of CCWs starting at 1, this means it would look
at a possible 257th CCW before ending the loop and (correctly)
returning an error.
Fix this by restructuring the loop to break as soon as 256 CCWs
(thus indexes 0-255) are examined, without looking at memory
outside the range.
Fixes: 0a19e61e6d ("vfio: ccw: introduce channel program interfaces")
Cc: stable@vger.kernel.org
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
The processing of channel programs, and the CCWs within them, is done
recursively. As such, there is an arbitrary (but not architectural)
limit to the number of CCWs that can exist in a single channel program.
The vfio-ccw logic breaks these channel programs into segments whenever
it encounters a Transfer-In-Channel (TIC) CCW, and the combined number
of segments count towards the global limit. Impose an equivalent limit
to the number of segments until such logic can be made non-recursive.
Fixes: 0a19e61e6d ("vfio: ccw: introduce channel program interfaces")
Cc: stable@vger.kernel.org
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
The routine cp_free() is called to unpin/free any memory once an I/O
is completed successfully, or if cp_prefetch() fails. But if cp_init()
fails, and cp->initialized is not enabled, the same routine cannot be
used to free all the memory.
An attempt to address this exists in ccwchain_handle_ccw(), where a
single call to ccwchain_free() is made for the currently-processed
CCW segment. But this will leak other segments (created as a result
of a Transfer in Channel) that had been allocated as part of the same
channel program.
Address this by performing the cleanup outside of the recursive
ccwchain_handle_ccw()/ccwchain_loop_tic() logic.
Fixes: 8b515be512 ("vfio-ccw: Fix memory leak and don't call cp_free in cp_init")
Cc: stable@vger.kernel.org
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Export populate_rate_format() as sdca_asoc_populate_rate_format() so that
it can be used by codec drivers.
The codec driver could get rate and format information for the IT/OT entity.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260729032237.3750805-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Export the sdca_find_entity_by_label() helper so that codec drivers can
locate SDCA entities by their labels.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260729032227.3750770-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The problem scenario:
If we have a folio mmapped shared and then somebody does a dio read with
that folio as the read destination, then it is possible that the dio
will see a dirty destination page when it starts (and thus skip
dirtying and just GUP pin it) but then while it is doing the read, btrfs
finishes writing it back and by the endio, the folio is clean. In that
case, the dio read must re-dirty the folio with aops->dirty_folio():
btrfs_check_read_bio()
|- __iomap_dio_bio_end_io() from btrfs_bio_end_io()
|- bio_check_pages_dirty()
|- bio_dirty_fn()
|- bio_release_pages(bio, true)
|- __bio_release_pages(bio, mark_dirty == true)
|- folio_lock()
|- folio_mark_dirty()
|- aops->dirty_folio()
|- folio_unlock()
A data block normally moves through writeback as follows:
TASK
folio_lock
write clean -> dirty bit + delalloc
folio_unlock
WRITEBACK
for-each-dirty-folio:
folio_lock
run_delalloc delalloc consumed -> dirty bit + OE
submission dirty bit consumed -> writeback bit + OE
folio_unlock
ENDIO
endio OE bytes accounted
OE finish writeback -> clean; destroy OE
Three critical invariants that this path maintains are:
I1. Any dirty block is covered by delalloc xor an ordered extent
I2. Any dirty block covered by an OE will be submitted into that OE
I3. Any dirty block already submitted into an OE will not be submitted
again into the same OE.
These ensure that the block will be written exactly once. It is clear
that not reserving delalloc for the re-dirty case violates I1.
This situation, even without bs < folio_size, has long required btrfs to
fixup such dirty pages during writeback with an asynchronous worker that
is allowed to do this expensive work and writeback does not proceed for
a folio while it is doing this work.
Commit 247e743cbe ("Btrfs: Use async helpers to deal with pages that
have been improperly dirtied") introduced the COW fixup to catch exactly
this class at writeback, way back in 2008.
Since then, there have been many advances to prevent most of the causes
of such re-dirtying and we thought we could get away with removing the
annoying cow-fixup in the hope of simplifying writeback for large folio
support.
Commit b2a9f217ad ("btrfs: remove the COW fixup mechanism")
Commit 4927b14187 ("btrfs: remove folio ordered flag and subpage bitmap")
Since it turns out this assumption was incorrect, as evidenced by the
report and attendant reproducers, we must reintroduce the fixup concept.
This is of course critically further complicated by bs < folio_size. In
that case, rather than just a folio dirty bit, we have a bitmap for the
dirty blocks in the folio. And the (also broken) invariant is:
I4. folio dirty IFF at least one block bitmap dirty.
The original report of a stall on a misinterpreted empty bitmap is
exactly evidence of a violation of I4.
It is exactly because of bs < folio_size we don't want to simply revert the
removal patches. The original fixup was not properly bs < folio_size
aware, which motivated removal in the first place. So we wish to build a
bs < folio_size aware fixup.
One other important detail from the old design, any normal write that
happens after a re-dirty but before a fixup is racing with the cow fixup
to do the delalloc reservation, therefore it must cancel the fixup state.
If it arrives after the reservation exists, it will be a normal dirty
overwrite. This critically informs the design in a pretty clear way.
fixup requiring re-dirty has folio granularity, while cancellation has
delalloc (block) granularity so while we only ever produce fixup in
chunks of folios, we must be able to clear it in blocks. Therefore we
must track the blocks needing fixup at block granularity.
The obvious way to do this is with a new bitmap in btrfs_folio_state,
but it is desirable to avoid that if possible. Unfortunately, I don't
think it is possible and the reason is subtle and leans on a sort of
extreme reproducer, but I think can be explained relatively succinctly.
Consider a folio whose two halves will land in different ordered extents
(can be accomplished with tricks using nodatasum) and a dio read is
running with it as the shared mmap destination.
1. The front half:
a. folio comes clean on a normal write
b. dio read completes into the folio marking it fixup.
c. a write comes for the previous folio for a range extending into
this folio, this is a cancellation of the fixup which reserves
space.
d. writeback runs on the range *not* overlapping the folio. This half
remains dirty but is now covered by an OE and is awaiting
writeback running on its range to be submitted and finish the OE.
2. The back half:
a. the folio is part of an OE that gets far enough along to clear
writeback.
b. dio read completes into the folio marking it fixup.
After this, the folio's front half is dirty in the "normal" sense, it
needs to be submitted to the OE waiting for it. It's a cancelled fixup.
Meanwhile, the second half is a true fresh fixup. So at this point if we
run writeback on this folio, we genuinely can't know what to do without
block level information. If we submit it, we submit unreserved dirty
from the back half. If we don't, we will never finish the OE waiting for
it. So it's either a corruption or a deadlock.
Thus, the full high level design picture:
- btrfs_data_dirty_folio(): For out of band non-reserving dirties,
mark still-clean blocks inside EOF dirty and set their fixup bits
(the event carries no range, so every clean block is suspect).
Already-dirty blocks are covered or pending and are left alone.
- Writeback: skip fixup blocks and enqueue work for them
- writepage_fixup(): for each fixup block do the fixup reservation in a
worker, after which the blocks can be written back normally.
- Typical reserving write paths cancel fixup state for the ranges they
cover with btrfs_folio_cancel_fixup()
Link: https://lore.kernel.org/linux-btrfs/20260721191152.101118-1-borntraeger@linux.ibm.com/
Assisted-by: LLM
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
The MSI iATU mapping is currently only cleared when the endpoint is
stopped via configfs or when the host updates the MSI address/size.
This avoids redundant iATU reconfiguration every time the endpoint
raises an MSI interrupt.
However, a fundamental reset triggered by PERST# assert/deassert
resets all iATU inbound/outbound registers without going through the
configfs stop path. If the host also retains the same MSI address/size
after PERST# deassert, the driver never clears the stale MSI iATU
mapping. It then continues using this stale mapping to raise the MSI
interrupts, which can cause IOMMU faults and MSI failures on the host.
Fix this by clearing the MSI iATU mapping inside dw_pcie_ep_cleanup(),
which is already called as part of the PERST# assert/deassert sequence.
This unmaps the MSI iATU region and sets the msi_iatu_mapped flag to
false, ensuring that dw_pcie_ep_raise_msi_irq() performs a fresh iATU
mapping on its next invocation, regardless of whether the host changed
the MSI address/size.
Fixes: 8719c64e76 ("PCI: dwc: ep: Cache MSI outbound iATU mapping")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Link: https://patch.msgid.link/20260729-pci-port-reset-v9-1-53570b92064d@oss.qualcomm.com
Some clients have specified a new requirement: complete device restarts
should be avoided after calibration. Only a hot boot of the Smart Audio
Amplifier is required.
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://patch.msgid.link/20260724102543.2067-1-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Turns out that my naive assumption that surely nobody is using io_uring
to manage nested epoll instances was wrong - libuv is in fact doing that
very thing. Since we have users in the wild using that feature, we
cannot remove it from upstream. Revert the commit that introduced that
limitation.
This reverts commit cfa1539b24.
Link: https://lore.kernel.org/io-uring/605939add4dfb674bd7ab39ef8dbd3fd22e754e4.camel@xry111.site/
Reported-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Inflight tracking of futex wait requests exists to ensure that do_exit()
-> io_uring_files_cancel() cancels them before the mm goes away, as a
private futex wait depends on the mm private futex hash staying alive
for the duration of the request.
Shared futexes have no such dependency. A FLAGS_SHARED request always
resolves to either an inode based key or an mm-shared key, both of which
fail futex_key_is_private() and hence always hash into the global futex
hash, whose lifetime isn't tied to the mm.
Only mark vectored futex waits as inflight if the futex is private.
Cc: stable@vger.kernel.org
Fixes: 079afb081c ("io_uring/futex: mark wait requests as inflight")
Link: https://lore.kernel.org/io-uring/CANGjgdn=R_qyUdE=j9za+vkmqcxacbP-84OHXF4nZ4ho9qRyVg@mail.gmail.com/
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit 079afb081c ("io_uring/futex: mark wait requests as inflight")
added inflight tracking to ensure that do_exit() ->
io_uring_files_cancel() finds and cancels pending futex waits before the
mm goes away, as a private futex wait depends on the mm private futex
hash staying alive for the duration of the request. However, as
io_futex_prep() is shared between FUTEX_WAIT and FUTEX_WAKE, wake
requests got marked as inflight as well.
A futex wake executes fully inline at issue time and never depends on
the mm staying alive after completion, hence there's no need to track
it. Kill it.
Cc: stable@vger.kernel.org
Fixes: 079afb081c ("io_uring/futex: mark wait requests as inflight")
Reported-by: Chengfeng Lin <lin2530632123@gmail.com>
Link: https://lore.kernel.org/io-uring/CANGjgdn=R_qyUdE=j9za+vkmqcxacbP-84OHXF4nZ4ho9qRyVg@mail.gmail.com/
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_ring_buffers_peek() builds an iovec array from provided buffers, and
that in turn can be handed off to a lower level provider. Be prudent and
cap the total size to MAX_RW_COUNT, which is the Linux default for how
much IO do to in a single call.
No bugs here, but it's a good preventative measure to avoid truncation
issues.
Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit:
6a8afb9fff ("io_uring/net: allow multishot receive per-invocation cap")
changed how io_mshot_prep_retry() set sr->len, and added the same
initialization in io_mshot_prep_retry(). But it neglected to touch the
send path, which may also uses the mshot retry path. Ensure that
sr->mshot_len always gets initialized correctly.
Fixes: 6a8afb9fff ("io_uring/net: allow multishot receive per-invocation cap")
Cc: stable@vger.kernel.org
Reported-by: Sung Keum <kambodi127@gmail.com>
Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
is not done yet. I'm not aware of any known pending regression.
Including fixes from netfilter, Bluetooth, WiFi and CAN.
Current release - regressions:
- eth: tun/vhost: revert avoid ptr_ring tail-drop when a qdisc is present
- bluetooth: remove unnecessary hci_conn_get in create_conn_sync
- can: isotp: fix timer drain order, wakeup handling and tx_gen ordering
Previous releases - regressions:
- core: do not send ICMP/NDISC Redirects when peer allocation fails
- ipv6: take nexthop lock for f6i_list walks in replace check and notify
- wifi: fix an ath12k MLO regression impacting WCN7850/QCC2072.
- netfilter: nf_tables: make nft_object rhltable per table
- af_unix: fix listen() succeeding on sockets in the wrong state
- openvswitch: fix potential UAF on meter attach failure
- bluetooth:
- fix advertising data UAFs
- avoid deadlocks in iso_sock_timeout
- smc: fix socket use-after-free during link group termination
- dpll: use pin owner's dpll ref for pin-level attribute reporting
- eth: veth: convert frag_list skbs before running XDP
- eth: ice: wait for reset completion in ice_resume()
- eth: igc: remove napi_synchronize() in igc_down()
- eth: vxlan: use pskb_network_may_pull() for transmit path header pulls
Previous releases - always broken:
- xsk: fix AF_XDP multi-buffer Tx descriptor reclaim
- psp: fix NULL genl_sock deref race with concurrent netns teardown
- netfilter: widen NAT rewrite delta to s32 in sip_help_tcp()
- can: peak_usb: fix double free of transfer buffer on URB submit error
- dibs: fix use-after-free of dmb_node in loopback attach/detach/unregister
- sctp: prevent peer transport count overflow
- eth: idpf: bound interrupt-vector register fill to the allocated array
- dsa: mt7530: error out on failed reads in MT7531 PHY polling
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=jLD8
-----END PGP SIGNATURE-----
Merge tag 'net-7.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"This is again larger than usual: the backlog accumulated in the past weeks
is not done yet. I'm not aware of any known pending regression.
Including fixes from netfilter, Bluetooth, WiFi and CAN.
Current release - regressions:
- bluetooth: remove unnecessary hci_conn_get in create_conn_sync
- can: isotp: fix timer drain order, wakeup handling and tx_gen
ordering
- eth:
- tun/vhost: revert avoid ptr_ring tail-drop when a qdisc is
present
Previous releases - regressions:
- core: do not send ICMP/NDISC Redirects when peer allocation fails
- ipv6: take nexthop lock for f6i_list walks in replace check and
notify
- wifi: fix an ath12k MLO regression impacting WCN7850/QCC2072.
- netfilter: nf_tables: make nft_object rhltable per table
- af_unix: fix listen() succeeding on sockets in the wrong state
- openvswitch: fix potential UAF on meter attach failure
- bluetooth:
- fix advertising data UAFs
- avoid deadlocks in iso_sock_timeout
- smc: fix socket use-after-free during link group termination
- dpll: use pin owner's dpll ref for pin-level attribute reporting
- eth:
- veth: convert frag_list skbs before running XDP
- ice: wait for reset completion in ice_resume()
- igc: remove napi_synchronize() in igc_down()
- vxlan: use pskb_network_may_pull() for transmit path header pulls
Previous releases - always broken:
- xsk: fix AF_XDP multi-buffer Tx descriptor reclaim
- psp: fix NULL genl_sock deref race with concurrent netns teardown
- netfilter: widen NAT rewrite delta to s32 in sip_help_tcp()
- can: peak_usb: fix double free of transfer buffer on URB submit error
- dibs: fix use-after-free of dmb_node in loopback attach/detach/unregister
- sctp: prevent peer transport count overflow
- dsa: mt7530: error out on failed reads in MT7531 PHY polling
- eth:
- idpf: bound interrupt-vector register fill to the allocated array"
* tag 'net-7.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (156 commits)
qede: sync udp_tunnel ports outside qede_lock in the recovery path
net: openvswitch: fix potential UAF on meter attach failure
octeontx2-pf: Set correct sequence for carrier off and tx queue stop
net: libwx: fix FDIR ATR queue mismatch for software VLAN packets
net: dsa: realtek: use devm_mutex_init for l2_lock
net: dsa: realtek: use devm_mutex_init for vlan_lock
net: dsa: realtek: use devm_mutex_init for regmap lock
net: dsa: realtek: rtl8365mb: use devm_mutex_init for mib_lock
ptp: netc: fix potential interrupt storm caused by incorrect unbind order
net: mana: Return error code from mana_create_rxq()
net: openvswitch: fix skb leak on flow key update failure during ct
net: openvswitch: fix skb leak on flow key update failure during recirculation
net: stmmac: Fix E2E delay mechanism
net: dsa: mt7530: error out on failed reads in MT7531 PHY polling
net: dsa: mt7530: error out on failed reads in ATC/VTCR command polling
net: dsa: mt7530: check bus->read() errors in the MDIO regmap backend
Revert "tun/tap: add ptr_ring consume helper with netdev queue wakeup"
Revert "vhost-net: wake queue of tun/tap after ptr_ring consume"
Revert "ptr_ring: move free-space check into separate helper"
Revert "tun/tap & vhost-net: avoid ptr_ring tail-drop when a qdisc is present"
...
- fix a memory leak in gpio-sloppy-logic-analyzer
- fix a regression in GPIO hog handling for hogs without direction
specified
- extend the critical section in IRQ handling in gpio-pca953x to cover
the reads from the direction register
- disable the interrupt on errors when restoring context in gpio-pca953x
- apply the initial value when setting direction in gpio-by-pinctrl
- use raw spinlock for the register lock in gpio-pch to address locking
context issues
-----BEGIN PGP SIGNATURE-----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=0jhj
-----END PGP SIGNATURE-----
Merge tag 'gpio-fixes-for-v7.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix a memory leak in gpio-sloppy-logic-analyzer
- fix a regression in GPIO hog handling for hogs without direction
specified
- extend the critical section in IRQ handling in gpio-pca953x to cover
the reads from the direction register
- disable the interrupt on errors when restoring context in
gpio-pca953x
- apply the initial value when setting direction in gpio-by-pinctrl
- use raw spinlock for the register lock in gpio-pch to address locking
context issues
* tag 'gpio-fixes-for-v7.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: pch: use raw_spinlock_t for the register lock
gpio: pca953x: fix cache_only and IRQ state on restore_context() failure
gpio: gpio-by-pinctrl: Apply initial value in direction output wrapper
gpio: pca953x: fix pca953x_irq_bus_sync_unlock regmap lock
gpiolib: tolerate gpio-hogs lacking a hogging state
gpio: sloppy-logic-analyzer: Fix memory leak in gpio_la_poll_probe()
Now no one calls snd_hda_get_pin_label() with the index pointer, so
let's drop the index handling from this helper function as a code
cleanup. This results in reduction of unneeded code.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260730084513.327992-3-tiwai@suse.de
get_jack_mode_name() tries to identify the (potential) index number of
the control element to be created, but this index number isn't
actually used, since the index is set automatically at instantiating
the controls.
Drop the unneeded index retrieval and calculation as a cleanup.
Along with the change, find_kctl_name() is no longer used, hence drop
this function as well.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260730084513.327992-2-tiwai@suse.de
On the ThinkBook 14 G8+ IPH (SSID 17aa:393e, ALC287) the F1 speaker mute
LED never lights up, while the F4 mic mute LED works.
Both LEDs are platform LEDs registered by lenovo-wmi-hotkey-utilities and
default to the audio-mute / audio-micmute triggers, so the speaker LED only
follows a control carrying SNDRV_CTL_ELEM_ACCESS_SPK_LED. No control on
this machine has that flag set, so snd_ctl_led never attaches anything and
/sys/class/sound/ctl-led/speaker/card0/list stays empty. The mic LED is
unaffected because MIC_LED is set from the SOF topology on the DMIC
control, which does not go through the codec fixups at all.
The pin configuration of this machine matches the ThinkPad pin quirk that
selects ALC285_FIXUP_THINKPAD_HEADSET_JACK - pin_config_match() masks out
the sequence/association nibbles, so 0x14=0x90170120 still matches the
0x90170110 in the table. That fixup chains into ALC269_FIXUP_THINKPAD_ACPI,
but hda_fixup_thinkpad_acpi() returns early because is_thinkpad() is false:
a ThinkBook exposes neither LEN0068/LEN0268 nor IBM0068. Therefore
snd_hda_gen_add_mute_led_cdev() is never called and spec->vmaster_mute_led
stays 0.
The vendor fallback SND_PCI_QUIRK_VENDOR(0x17aa, "Lenovo XPAD",
ALC269_FIXUP_LENOVO_XPAD_ACPI) would have handled this correctly - the
machine does expose LHK2019 and VPC2004, so is_ideapad() is true - but it
never runs: the pin quirk has already set codec->fixup_id, and
snd_hda_pick_fixup() returns immediately in that case.
Add an SSID quirk selecting a fixup that keeps everything the machine
currently gets (headset jack handling plus the X1 Gen7 DAC routing) and
additionally runs the ideapad ACPI setup. It chains into
ALC287_FIXUP_LENOVO_YOGA_PRO7, which already combines
alc285_fixup_thinkpad_x1_gen7 with ALC269_FIXUP_LENOVO_XPAD_ACPI, so the
resulting chain differs from the current one only by the added ideapad step
and cannot regress the analog output or the headset jack.
Tested on 7.1.5 on the affected machine: the speaker LED group is now
populated at probe time without any userspace help, and the F1 LED
follows the mute state. Compared against a boot with the previous fixup
selection, the mixer control list (names and numids) and the registered
jack input devices are identical.
Note that the underlying mismatch is not specific to this SSID. Any Lenovo
non-ThinkPad whose pins collide with a ThinkPad pin quirk loses its mute
LED the same way. Letting hda_fixup_thinkpad_acpi() fall back to the
ideapad check would cover the whole class at once, but that touches a
helper shared with every ThinkPad, so this patch only fixes the machine
that was actually tested.
Signed-off-by: Padhia Luo <lcj20010426@gmail.com>
Link: https://patch.msgid.link/20260730071453.19636-1-lcj20010426@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
raid10_write_request() drops the barrier before calling
bio_submit_split_bioset() and reacquires it afterwards. This is no
longer necessary because the split bio cannot re-enter
raid10_write_request() while the barrier is held.
The allow_barrier()/wait_barrier() pair was introduced by commit
e820d55cb9 ("md: fix raid10 hang issue caused by barrier") when
submit_flushes() called md_handle_request() directly, allowing re-entry
into raid10_write_request(). Since v5.2, submit_flushes() has instead
gone through submit_bio(), eliminating that recursion. submit_flushes()
was later removed entirely by commit b75197e86e ("md: Remove flush
handling").
Currently, raid10_write_request() is only entered from the bio
submission path, so the split bio submitted by bio_submit_split_bioset()
cannot recurse back into wait_barrier().
Remove the redundant allow_barrier()/wait_barrier() pair around
bio_submit_split_bioset().
Signed-off-by: Abd-Alrhman Masalkhi <abd.masalkhi@gmail.com>
Reviewed-by: Yu Kuai <yukuai@fygo.io>
Link: https://patch.msgid.link/20260710101521.1714-5-abd.masalkhi@gmail.com
Signed-off-by: Yu Kuai <yukuai@fygo.io>
RAID10 currently handles one badblock path explicitly by failing atomic
writes with EIO. However, another badblock path can also reduce the
writable range and force the bio through bio_submit_split_bioset(),
which implicitly completes the bio with EINVAL.
Fix this by handling atomic writes in the common split check. If RAID10
determines that an atomic write would require splitting, complete the
bio with EIO.
Fixes: a1d9b4fd42 ("md/raid10: Atomic write support")
Signed-off-by: Abd-Alrhman Masalkhi <abd.masalkhi@gmail.com>
Reviewed-by: Yu Kuai <yukuai@fygo.io>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Link: https://patch.msgid.link/20260710101521.1714-4-abd.masalkhi@gmail.com
Signed-off-by: Yu Kuai <yukuai@fygo.io>
Restrict the RAID1 atomic write limits by setting chunk_sectors to
BARRIER_UNIT_SECTOR_SIZE so that atomic writes never straddle a barrier
unit.
A bio that passes block-layer validation may still become unserviceable
within RAID1 due to bad blocks or write-behind constraints. In the former
case, complete the bio with EIO. In the latter case, disable
write-behind rather than failing the bio with EIO.
Fixes: f2a38abf5f ("md/raid1: Atomic write support")
Fixes: a4c55c9026 ("md/raid1: simplify raid1_write_request() error handling")
Reviewed-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Abd-Alrhman Masalkhi <abd.masalkhi@gmail.com>
Reviewed-by: Yu Kuai <yukuai@fygo.io>
Link: https://patch.msgid.link/20260710101521.1714-3-abd.masalkhi@gmail.com
Signed-off-by: Yu Kuai <yukuai@fygo.io>
- Ensure vpa,slb_shadow & dtl are unregistered during crash
- fix nap return address corruption on async interrupt exit in 970 platform
- Fix exit_flags field placement in pt_regs for ptrace
- Fix map failure path in dma_ioc0_map_pages() in ps3 platfrom
- MAINTAINERS: Demote myself to reviewer
- misc fixes and cleanup
Thanks to:
Amit Machhiwal, Andreas Schwab, Anushree Mathur, Athira Rajeev, Christophe
Leroy (CS GROUP), Dmitry V. Levin, Geert Uytterhoeven, John Ogness, Michael
Ellerman, Mukesh Kumar Chaurasiya (IBM), Ritesh Harjani (IBM), Thorsten Blum,
Vaibhav Jain
-----BEGIN PGP SIGNATURE-----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=On4C
-----END PGP SIGNATURE-----
Merge tag 'powerpc-7.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Madhavan Srinivasan:
- ensure vpa,slb_shadow & dtl are unregistered during crash
- fix nap return address corruption on async interrupt exit in 970
platform
- fix exit_flags field placement in pt_regs for ptrace
- fix map failure path in dma_ioc0_map_pages() in ps3 platfrom
- MAINTAINERS: Michael Ellerman demotes himself to reviewer
- misc fixes and cleanup
Thanks to Amit Machhiwal, Andreas Schwab, Anushree Mathur, Athira
Rajeev, Christophe Leroy (CS GROUP), Dmitry V. Levin, Geert
Uytterhoeven, John Ogness, Michael Ellerman, Mukesh Kumar Chaurasiya
(IBM), Ritesh Harjani (IBM), Thorsten Blum, and Vaibhav Jain
* tag 'powerpc-7.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
MAINTAINERS: Demote myself to reviewer
powerpc/serial: Fix include guard comment
powerpc/perf: Use strstarts() to simplify is_thread_imc_pmu()
powerpc/ps3: Fix map failure path in dma_ioc0_map_pages()
powerpc/ps3: Remove unused struct table in setup_areas()
powerpc/boot: Fix treeboot-akebono CPU node lookup check
powerpc/boot: Fix treeboot-currituck CPU node lookup check
powerpc/boot: Fix simpleboot CPU node lookup check
powerpc: Fix exit_flags field placement in pt_regs for ptrace
powerpc/970: fix nap return address corruption on async interrupt exit
powerpc/pseries: Skip vpa_init() for boot cpu in smp_setup_cpu()
powerpc/pseries: Ensure vpa,slb_shadow & dtl are unregistered during crash
status is always zero at the last return in ath6kl_init_upload().
Explicitly return 0 on the success path instead of returning status.
No functional change.
Signed-off-by: Sang-Heon Jeon <ekffu200098@gmail.com>
Link: https://patch.msgid.link/20260729160458.201962-1-ekffu200098@gmail.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Currently, in ath11k_wmi_tlv_mac_phy_caps_parse(), kcalloc() sizes the
mac_phy_caps buffer as tot_phy_id * len, where len is clamped to
min(firmware_len, sizeof(struct wmi_mac_phy_capabilities)). The subsequent
memcpy() destination advances by sizeof(full struct) per slot via C
pointer arithmetic, not by the clamped len. When firmware sends short
TLVs, the second and later slots are written past the end of the
allocation.
The reader in ath11k_pull_mac_phy_cap_svc_ready_ext() also indexes the
buffer with full-struct pointer arithmetic, so the allocation must match
that stride.
Fix by using kzalloc_objs(), which derives the element size from the
pointer type, making allocation size and pointer stride provably
consistent regardless of what len the firmware provides.
Compile tested only.
Fixes: 5b90fc760d ("ath11k: fix wmi service ready ext tlv parsing")
Assisted-by: Claude:claude-sonnet-4-6
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Link: https://patch.msgid.link/20260728-mac_phy_caps_parse-stride-mismatch-v1-2-27a9c1a3fbd0@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Currently, in ath12k_wmi_mac_phy_caps_parse(), kzalloc() sizes the
mac_phy_caps buffer as tot_phy_id * len, where len is clamped to
min(firmware_len, sizeof(struct ath12k_wmi_mac_phy_caps_params)). The
subsequent memcpy() destination advances by sizeof(full struct) per slot
via C pointer arithmetic, not by the clamped len. When firmware sends
short TLVs, the second and later slots are written past the end of the
allocation.
The reader in ath12k_pull_mac_phy_cap_svc_ready_ext() also indexes the
buffer with full-struct pointer arithmetic, so the allocation must match
that stride.
Fix by using kzalloc_objs(), which derives the element size from the
pointer type, making allocation size and pointer stride provably
consistent regardless of what len the firmware provides.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c7-00108-QCAHMTSWPL_V1.0_V2.0_SILICONZ_UPSTREAM-3
Fixes: d889913205 ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices")
Assisted-by: Claude:claude-sonnet-4-6
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Link: https://patch.msgid.link/20260728-mac_phy_caps_parse-stride-mismatch-v1-1-27a9c1a3fbd0@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
The GENI main sequencer handles console TX while the secondary sequencer
handles FIFO RX. Before nbcon, the legacy console writer disabled both
interrupt domains while it performed a long polled M-side transfer. This
left the small S-side FIFO unserviced, allowing console input to overrun
and be lost.
The nbcon conversion replaces IRQ masking with the UART port lock, but a
threaded console write still prevents the RX handler from draining the
FIFO. Keep S-side RX enabled independently of M-side TX and drain it
while refilling each bounded console command. This preserves interactive
input during console output.
Atomic output masks only M-side TX state, leaving FIFO RX handling
independent. The threaded writer can also detect a SysRq character while
it drains RX, so defer delivery until device_unlock() drops the UART port
lock, as the existing IRQ path does with uart_unlock_and_check_sysrq().
Assisted-by: OpenCode:GPT-5.5
Signed-off-by: Bjorn Andersson <bjorn.andersson@oss.qualcomm.com>
Link: https://patch.msgid.link/20260729-qcom-geni-nbcon-v1-2-3053b96465ed@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The legacy GENI console writer serializes every message around a
synchronous polled M-side transfer. It blocks printk callers for UART
wire time and cannot provide atomic output while normal console output is
active.
Convert the console to nbcon threaded and atomic writers. Use the UART
port lock as the device lock and bound threaded M-side commands so
urgent diagnostics can take over atomic output. The threaded writer is
batching the output in 32-source-byte commands, a value chosen to
balance the command setup overhead with atomic-handoff latency.
Atomic output can cancel an active normal TX command. Use irq_work to
resume queued TTY output afterward, honor flow control, and prevent the
deferred restart from accessing the port during shutdown or removal.
Assisted-by: OpenCode:GPT-5.5
Signed-off-by: Bjorn Andersson <bjorn.andersson@oss.qualcomm.com>
Link: https://patch.msgid.link/20260729-qcom-geni-nbcon-v1-1-3053b96465ed@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The driver currently relies on qcom_geni_serial_pm() through the
uart_ops.pm callback to manage runtime PM references. However, the
callback has a void return type, so failures from
pm_runtime_resume_and_get() cannot be propagated to the caller.
As a result, startup() may continue and access hardware even when the
runtime PM resume operation failed, leading to register accesses while
the device is not powered.
Move runtime PM acquisition to qcom_geni_serial_startup() and release it
to qcom_geni_serial_shutdown(). Since startup() can return an error, PM
resume failures are now detected and propagated before any hardware
initialization is performed. The startup/shutdown pair also provides a
natural place to balance runtime PM references for normal port usage.
During probe, uart_add_one_port() may configure the port before any user
opens the TTY, meaning startup() has not yet been called. To keep the
hardware powered during port registration, acquire a runtime PM
reference with pm_runtime_resume_and_get() before uart_add_one_port()
and release it with pm_runtime_put() afterwards.
By moving runtime PM handling out of uart_ops.pm, resume failures are no
longer silently ignored and all hardware accesses are guaranteed to
occur while the device is powered.
Signed-off-by: Praveen Talari <praveen.talari@oss.qualcomm.com>
Link: https://patch.msgid.link/20260720-remove_uart_change_state-v2-1-30153ce4333b@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This driver doesn't really need to split the registration of the GPIO
chip into stages, as platform_device_info already provides fields for
the firmware node, parent device and the software node. Use
platform_device_register_full() and simplify the code. This also
addresses the problem with incorrect reference count of the assigned
firmware node.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260728-exar-pdev-reg-full-v1-1-7a96e77309e1@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
