The SoundWire core helpers now check for NULL on the SoundWire
peripheral so there is no need to do so locally, remove the
duplicate checks.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260708100914.1298080-1-ckeepax@opensource.cirrus.com
Signed-off-by: Lee Jones <lee@kernel.org>
The compatible string "st,stmpe601" is a typo and does not correspond to
any existing STMPE device in either the driver or DTS files. The correct
compatible string is "st,stmpe610".
Fix the typo to ensure proper schema matching and eliminate the
following CHECK_DTBS warning:
imx53-m53evk.dtb: /soc/bus@60000000/i2c@63fc4000/touchscreen@41: failed to match any schema with compatible: ['st,stmpe610']
Fixes: e10038ce1b ("dt-bindings: mfd: Convert STMPE to YAML schema")
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260706192932.1573584-1-Frank.Li@oss.nxp.com
Signed-off-by: Lee Jones <lee@kernel.org>
The two previous commits adapted the style of some spi_device_id arrays.
Fix the remaining arrays to the same style, that is:
- no comma after the list terminator and after an initializer iff the
closing } is on the same line
- a single space in the list terminator
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/323dc79eb1bcc55caf0163e26501e1de3e710554.1783003256.git.u.kleine-koenig@baylibre.com
Signed-off-by: Lee Jones <lee@kernel.org>
While being less compact, using named initializers allows to more easily
see which members of the structs are assigned which value without having
to lookup the declaration of the struct. And it's also more robust
against changes to the struct definition.
The mentioned robustness is relevant for a planned change to struct
spi_device_id that replaces .driver_data by an anonymous union.
Also adapt spacing and usage of commas to the most common style.
This patch doesn't modify the compiled array, only its representation
in source form benefits.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/f83c8292e7e3ba9425792591fb136d4ae1468215.1783003256.git.u.kleine-koenig@baylibre.com
Signed-off-by: Lee Jones <lee@kernel.org>
The drivers explicitly set the .driver_data member of struct
spi_device_id to zero without relying on that value. Drop these unused
assignments.
While touching these arrays use named initializers for .name.
This patch doesn't modify the compiled arrays, only their representation
in source form benefits. The former was confirmed with x86 and arm64
builds.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/15dc05c1a49f79b6cb43684d8bcf60adcd1be7de.1783003256.git.u.kleine-koenig@baylibre.com
Signed-off-by: Lee Jones <lee@kernel.org>
kfree() safely handles NULL pointers, so the explicit NULL check
before calling kfree() is unnecessary.
This issue was reported by ifnullfree.cocci.
Signed-off-by: Mohammad Shahid <mdshahid03@gmail.com>
Link: https://patch.msgid.link/20260703105937.62541-1-mdshahid03@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Move the DBx500 PRCMU definitions into the DB8500 PRCMU
header and delete the wrapper header.
Convert users of simple PRCMU wrappers to call the DB8500 helpers
directly.
The dbx500-prcmu.h header was the result of an earlier attempt to
abstract several DBx5x SoC PRCMU units to use the same abstract
header. They are deleted from the kernel and this is not just
causing maintenance burden and build errors.
The stub code is using -ENOSYS in a way checkpatch complains about
so replace these with -EINVAL while we're at it.
Assisted-by: Codex:gpt-5-5
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202606180825.vUSQntkJ-lkp@intel.com/
Signed-off-by: Linus Walleij <linusw@kernel.org>
Acked-by: Brian Masney <bmasney@redhat.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/oe-kbuild-all/202606180825.vUSQntkJ-lkp@intel.com/
Link: https://patch.msgid.link/20260619-mfd-prcmu-merge-headers-v1-1-8ea0ee23b4d6@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
Initialize the PMIC's battery page. The battery page registers are
shared between Vbus regulator, charger, fuelgauge and camera flash
blocks, hence the commonization of the page.
Signed-off-by: Duje Mihanović <duje@dujemihanovic.xyz>
Reviewed-by: Karel Balej <balejk@matfyz.cz>
Link: https://patch.msgid.link/20260613-88pm886-vbus-v2-2-021dfb02c6bb@dujemihanovic.xyz
Signed-off-by: Lee Jones <lee@kernel.org>
Add vbus to patternProperties for the regulators node to allow for the
PMIC's vbus regulator to be exposed.
Reviewed-by: Karel Balej <balejk@matfyz.cz>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Duje Mihanović <duje@dujemihanovic.xyz>
Link: https://patch.msgid.link/20260613-88pm886-vbus-v2-1-021dfb02c6bb@dujemihanovic.xyz
Signed-off-by: Lee Jones <lee@kernel.org>
Now the new wait for SoundWire enumeration helper no longer depends on
unattach_request it is safe to use from probe time. Update the driver
to use the new core helper.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20260608102714.2503120-4-ckeepax@opensource.cirrus.com
Signed-off-by: Lee Jones <lee@kernel.org>
Add Intel LPSS section to follow the changes in the related drivers.
These are all for the Intel SoCs and platforms starting from Sky Lake.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260429094521.3672945-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Lee Jones <lee@kernel.org>
axp20x_power_off() triggers shutdown by writing AXP20X_OFF (BIT(7)) to
the power-off control register with regmap_write(), which rewrites the
whole register and clears other control bits in it.
On the AXP221/AXP223 (and the register-compatible AXP228) - that
register also holds the CHGLED auto-control bit.
Clearing it during an orderly shutdown disables the hardware charge
indicator, so the charge LED stays dark while the board is powered off
and charging. Other variants keep unrelated configuration in the same
register too.
Set only the power-off bit with regmap_set_bits() and leave the rest of
the register untouched. The shutdown register is readable on every
variant, so the read-modify-write should be safe.
Tested on a ClockworkPi uConsole (Raspberry Pi Compute Module 4, AXP228,
which enumerates as AXP221): register AXP20X_OFF_CTRL reads 0x08 at
runtime, so the old code left it 0x80 whereas setting only BIT(7)
leaves 0x88. Writing 0x88 at power-off enables the charge LED
while still powering off the PMIC.
Signed-off-by: Oleg Proshkin <oleg.pro171@gmail.com>
Reviewed-by: Chen-Yu Tsai <wens@kernel.org>
Link: https://patch.msgid.link/20260611154629.76607-1-oleg.pro171@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Add compatible string for PMG1110 which is used on Maili platform.
Signed-off-by: Fenglin Wu <fenglin.wu@oss.qualcomm.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260609-pmg1110-v1-1-6604d0adc907@oss.qualcomm.com
Signed-off-by: Lee Jones <lee@kernel.org>
ipaq_micro_str() decodes a UTF-16LE string into an ASCII string.
It copies characters to a stack buffer retstr, but fails to
null-terminate it. When kstrdup() is called on retstr, it can read past
the buffer into uninitialized stack memory, potentially leaking stack
contents.
Fix this by initializing retstr to zero.
Reported-by: sashiko-bot@kernel.org
Assisted-by: Antigravity:gemini-3.5-flash
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://patch.msgid.link/aintJF4X5tWDW-Ej@google.com
Signed-off-by: Lee Jones <lee@kernel.org>
The SI476X driver depends on the legacy GPIO API. As it only
really use a single GPIO for reset, and this can be easily converted
to use a GPIO descriptor, modernize the driver.
The "reset" GPIO is obtained from a device property, such as a
device tree ("reset-gpios", which is standard, but this hardware has
no DT bindings as of now) or a software node for static platforms.
Out-of-tree users can easily adopt to providing a GPIO descriptor
this way.
Signed-off-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260608-mfd-si476x-v2-1-da5f779c1888@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
The mt6323 PMIC includes an EFUSE. Register the EFUSE in the mt6323
devices array to allow the corresponding driver to probe using compatible
string.
Signed-off-by: Roman Vivchar <rva333@protonmail.com>
Tested-by: Ben Grisdale <bengris32@protonmail.ch> # Amazon Echo Dot (2nd Generation)
Link: https://patch.msgid.link/20260617-mt6323-nvmem-v2-3-4f30e36aa0f4@protonmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Older dtschema <2024.02 required custom select to avoid applying this
binding to anything having "syscon" compatible. That's not the case
anymore and this additional select has two headaches:
1. Duplicates all the compatibles listed in the schema.
2. Is error-prone, because it requires contributor to add the compatible
in two places, otherwise the schema will be silently ignored.
The select list already misses mentioning compatibles:
mediatek,mt8365-infracfg-nao and renesas,r9a08g046-lvds-cmn (with the
latter being reverted for different reasons).
This requires bumping minimum dtschema requirement to v2024.04, which
feels old enough to be a safe requirement.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260608-n-dt-bindings-simple-bus-syscon-v3-2-4eba9ec1212a@oss.qualcomm.com
Signed-off-by: Lee Jones <lee@kernel.org>
"syscon" is a system controller with registers having their own
functions, thus not really a trivial MMIO simple bus. "simple-bus" on
the other hand is just a bus on which multiple devices sit and the
"simple" means no functions are allowed here.
Combination of both "syscon" and "simple-bus" is abuse of DT for easier
instantiating of Linux device drivers so add a schema to disallow that.
Unfortunately there are a few old cases of that patterns, so add
exceptions:
1. "cznic,turris1x-cpld" and "img,pistachio-cr-periph" are already used
in upstream DTS.
2. TI has several DTSI with a child of SCM device (e.g. "ti,am3-scm")
using "syscon" and "simple-bus" but without a dedicated compatible
documented anywhere. Add new compatibles for such cases.
Additionally, add comments around code enforcing two or three
compatibles: it is similar safeguard detecting incorrect bindings.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260608-n-dt-bindings-simple-bus-syscon-v3-1-4eba9ec1212a@oss.qualcomm.com
Signed-off-by: Lee Jones <lee@kernel.org>
Update all three s390 vfio sections to clarify that s390 specific
vfio code normally will go upstream via the kvms390 git tree.
Add a corresponding T entry to reflect that.
For consistency with the other s390 specfic vfio sections rename
"VFIO AP" to "VFIO-AP" and add an L entry for the kvm mailing list.
Acked-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Acked-by: Matthew Rosato <mjrosato@linux.ibm.com>
Acked-by: Eric Farman <farman@linux.ibm.com>
Acked-by: Anthony Krowiak <akrowiak@linux.ibm.com>
Acked-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
A TX timeout on a qede NIC that has VXLAN/GENEVE tunnel ports
configured wedges the rtnetlink control plane of the whole machine:
NETDEV WATCHDOG: ens6f1 (qede): transmit queue 2 timed out 10226 ms
[qede_tx_timeout:586(ens6f1)]TX timeout on queue 2!
[qede_recovery_handler:2665(ens6f0)]Starting a recovery process
The recovery path deadlocks on the driver's own mutex:
qede_sp_task
rtnl_lock()
mutex_lock(&edev->qede_lock) <- taken
qede_recovery_handler
qede_load
udp_tunnel_nic_reset_ntf
__udp_tunnel_nic_device_sync
info->sync_table == qede_udp_tunnel_sync
mutex_lock(&edev->qede_lock) <- same task: deadlock
The mutex is not recursive, so the kworker blocks on itself with
rtnl_lock held, and neither lock is ever released. Every task that
calls rtnl_lock() afterwards (ip, ovs-vswitchd, lldpad, IPv6
addrconf, sshd) blocks forever while the node still answers ping.
In a vmcore from an affected production node rtnl_mutex.owner
decodes to the very kworker blocked at the innermost mutex_lock()
above.
Re-sync the tunnel ports from qede_sp_task() after the internal lock
is dropped, still under rtnl_lock as the udp_tunnel API requires.
This mirrors qede_open(), which calls udp_tunnel_nic_reset_ntf()
under rtnl without the internal lock.
qede_recovery_handler() now returns whether it has successfully
reloaded an open device, and the caller re-syncs the ports only in
that case. This keeps the old gating exactly: a device that was down
or a failed recovery returns false, as those paths never reached the
udp_tunnel_nic_reset_ntf() call before either.
This was the only user of the qede_lock()/qede_unlock() helpers, so
remove them.
Fixes: 8cd160a294 ("qede: convert to new udp_tunnel_nic infra")
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Andrew Lunn <andrew+netdev@lunn.ch>
CC: "David S. Miller" <davem@davemloft.net>
CC: Eric Dumazet <edumazet@google.com>
CC: Jakub Kicinski <kuba@kernel.org>
CC: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260726104311.1782900-1-den@openvz.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----
iIkEABYKADEWIQSl+MghEFFAdY3pYJLMOmT6rpmt0gUCamnRyhMcbWtsQHBlbmd1
dHJvbml4LmRlAAoJEMw6ZPquma3SS00A/Rpm6GVkF0ievxaEWz5no+Vojn2U/S7K
3ix+pFFfrnyTAP9CfWhg8aIkLOF19RXhKRRLDIm5vI8qKCqrqBkSZszJCw==
=Qoox
-----END PGP SIGNATURE-----
Merge tag 'linux-can-fixes-for-7.2-20260729' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2026-07-29
this is a pull request of 20 patches for net/main.
The first 2 patches fix problems in the CAN J1939 protocol and are by
Tetsuo Handa and Oleksij Rempel.
The next 2 patches fix problems in the CAN ISOTP protocol and are by
Oliver Hartkopp and Minhong He.
Avi Weiss contributes contributed 4 fixes for the ctucanfd, Pengpeng
Hou's patch adds a missing MODULE_DEVICE_TABLE.
The patches for the peak_usb driver are contributed by James Gao,
Maoyi Xie, Maoyi Xie and add sanity checks for the USB bulk data
parsing and fix a double free.
2 fixes for the kvaser_usb driver are provided by Abdun Nihaal and
Pengpeng Hou, a mem leak is fixed and sanity checks for the USB bulk
data parsing.
Tu Nguyen's patch for the rcar_canfd driver fixes the initializing
flow.
Pengpeng Hou contributes a patch for the softing driver to validate
the firmware record spans.
Lucas Martins Alves's patch for the c_can driver keeps the controller
in init mode until configuration is complete.
A patch by my add missing URB resubmission on skb allocation failure
to the gs_usb driver.
Guangshuo Li's patch for the etas_es58x driver fixes a RX buffer leak.
The last patch is by Pengpeng Hou and adds sanity checks to the USB
bulk data parsing of the ems_usb driver.
linux-can-fixes-for-7.2-20260729
* tag 'linux-can-fixes-for-7.2-20260729' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: ems_usb: validate CPC message lengths
can: etas_es58x: es58x_read_bulk_callback(): fix RX buffer leak on URB resubmit failure
can: gs_usb: gs_usb_receive_bulk_callback(): resubmit URB on skb allocation failure
can: c_can: c_can_chip_config(): keep controller in init mode until bittiming is configured
can: softing: fw_parse(): validate firmware record spans
can: rcar_canfd: change the initializing flow for clocks and resets
can: kvaser_usb_leaf: kvaser_usb_leaf_wait_cmd(): validate received command extents
can: kvaser_usb: kvaser_usb_hydra_get_busparams(): fix memory leak in kvaser_usb_hydra_get_busparams()
can: peak_usb: validate uCAN receive record lengths
can: peak_usb: peak_usb_start(): fix double free of transfer buffer on URB submit error
can: peak_usb: add bounds check for USB channel index
can: ctucanfd: add missing MODULE_DEVICE_TABLE()
can: ctucanfd: use self-test mode for PRESUME_ACK
can: ctucanfd: handle bus error interrupts
can: ctucanfd: mark error-active controller status valid
can: ctucanfd: unmap BAR0 using base address
can: isotp: check register_netdevice_notifier() error in module init
can: isotp: fix timer drain order, wakeup handling and tx_gen ordering
can: j1939: transport: j1939_session_fresh_new(): initialize receive buffer
can: j1939: use netdevice_tracker for j1939_{priv,session,ecu} tracking
====================
Link: https://patch.msgid.link/20260729102802.505168-1-mkl@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Convert acp-pci to the pcim-managed PCI life-cycle. Replace
pci_enable_device() with pcim_enable_device() and fold the
open-coded pci_request_regions() + devm_ioremap() pair into a single
pcim_iomap_region() call for BAR0, which reserves and iomaps the
register window.
This lets the driver drop the manual pci_release_regions() and
pci_disable_device() calls from the probe error path; pcim releases
the device and region automatically on detach or probe failure. The
error check moves from a NULL test to IS_ERR(), since pcim_iomap_region()
returns an IOMEM_ERR_PTR on failure.
The child platform devices only use devm_ioremap() on their sub-range
of BAR0 (no request_mem_region), so reserving the full BAR0 here does
not conflict with them.
Assisted-by: opencode:hy3-free
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://patch.msgid.link/20260720001054.1439409-1-rosenp@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A large amount of memory may be allocated for these magazines on
machines with a lot of IOMMU groups and CPU cores. Not all may be used
as some devices may be unused or be bound to drivers that do not use the
DMA-API. Furthermore, some drivers may not use all levels or CPUs.
Move the initialization of the loaded and prev magazines for each CPU on
the first attempt to try to insert a freed IOVA to them.
Signed-off-by: Logan Odell <loganodell@google.com>
Signed-off-by: Michal Clapinski <mclapinski@google.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
iommu_call_iopf_notifier() looks up the requester with
pci_get_domain_bus_and_slot(), which returns a PCI device with its
reference count incremented.
Neither the successful iommu_report_device_fault() path nor the abort
path drops that reference, so every handled PPR request leaks a PCI
device reference.
This is the same ownership rule that was fixed for the old iommu_v2
ppr_notifier() path by commit 6cf0981c22 ("iommu/amd: Fix pci device
refcount leak in ppr_notifier()"), but iommu_call_iopf_notifier() was
added later as a separate PPR/IOPF notifier path.
Drop the PCI device reference after handling the PPR entry.
Fixes: 978d626b8f ("iommu/amd: Add IO page fault notifier handler")
Cc: stable@vger.kernel.org
Assisted-by: Qoder:Qwen-3.8-MAX-Preview
Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Convert fsl_soc_dma_probe() to managed APIs. Replace the open-coded
of_address_to_resource()/of_iomap() of the DMA channel registers with
devm_platform_ioremap_resource(), and irq_of_parse_and_map() with
platform_get_irq() (which returns a negative errno instead of 0).
Switch the allocation to devm_kzalloc() and register the component via
the devm variant, dropping the now-unneeded error-path cleanup and the
manual fsl_soc_dma_remove().
The SSI node's register resource is still read via of_address_to_resource()
to compute the SSI FIFO physical addresses (dma->ssi_stx_phys /
ssi_srx_phys); only the DMA controller window is mapped.
The DMA controller register window is owned solely by this driver, so the
new region request from devm_platform_ioremap_resource() cannot conflict
with another claimant, and it is mapped exactly once (no double mapping).
The local channel pointer is declared as void __iomem * so the
devm_platform_ioremap_resource() result can be stored before assignment
to dma->channel.
No functional change; built for powerpc (allmodconfig + CONFIG_SND_SOC_FSL_DMA)
with LLVM=1 and sound/soc/fsl/fsl_dma.o compiles cleanly.
Assisted-by: opencode:hy3-free
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://patch.msgid.link/20260721225442.817787-1-rosenp@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
haibo.chen@oss.nxp.com <haibo.chen@oss.nxp.com> says:
Patch 1 introduce per-SoC clock rate limits for both SDR and DTR modes
by adding max_sdr_rate and max_dtr_rate to nxp_fspi_devtype_data.
Patch 2 enter stop mode before reconfiguring MCR0 and DLL to follow
FlexSPI reference manual initialization sequence
Patch 3 propagate clock reconfig failures in nxp_fspi_select_mem()
Link: https://patch.msgid.link/20260728-fspi-clock-v2-0-dbe786a4a6eb@nxp.com
nxp_fspi_select_mem() disables the FlexSPI clocks before calling
clk_set_rate() and re-enabling them. If clk_set_rate() or the clock
re-enable fails, the function returned early (as void) leaving both the
serial root clock and the register interface clock disabled.
As the function returned void, nxp_fspi_exec_op() had no way to know
about the failure and continued to access FlexSPI registers (LUT setup,
data transfer, AHB buffer invalidation). Accessing the controller
registers while its clock is gated off results in a synchronous external
abort.
Make nxp_fspi_select_mem() return an error code and have
nxp_fspi_exec_op() bail out on failure before any further register
access, including nxp_fspi_invalid().
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Link: https://patch.msgid.link/20260728-fspi-clock-v2-3-dbe786a4a6eb@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In nxp_fspi_select_mem() the RX sample clock source (MCR0[RXCLKSRC])
and the DLL control registers (DLLxCR) are reconfigured while the
FlexSPI module is still enabled. According to the FlexSPI reference
manual initialization sequence, MCR0 and the DLL control registers
should be programmed while the module is in stop mode, i.e. with
MCR0[MDIS] set to 1, and the module re-enabled (MCR0[MDIS] = 0)
afterwards.
Wrap the RX sample clock source selection and the DLL calibration/
override reconfiguration in a stop-mode window to align with the RM
and avoid reconfiguring timing-critical registers while the module is
active.
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260728-fspi-clock-v2-2-dbe786a4a6eb@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The commit f43579ef35 ("spi: spi-nxp-fspi: limit the clock rate for
different sample clock source selection") introduced a global 166MHz
cap for DTR mode (RXCLKSRC=3), based on the i.MX8MN datasheet timing
specification (Section 3.9.9, page 65).
After reviewing the FlexSPI timing parameters in the datasheets for all
supported SoCs, the following corrections and additions are needed:
1. SDR mode (RXCLKSRC=0) limits vary per SoC:
- i.MX8MN/MM/MP/95: 66MHz (IMX8MNCEC §3.9.9, IMX8MMCEC §3.9.10,
IMX8MPCEC, IMX95CEC Rev.8 §4.11.7)
- i.MX8QXP/QM/DXL/ULP: 60MHz (IMX8QXPCEC, IMX8QMCEC, IMX8DXLCEC,
IMX8ULPCEC §7.3.1 ND mode)
- LX2160A: 100MHz (LX2160ACEC FlexSPI timing parameters)
2. DTR mode (RXCLKSRC=3) limits vary per SoC:
- i.MX8MN/MM/MP/ULP: 166MHz
- i.MX8QXP/QM/DXL: 200MHz (same FlexSPI IP across this family)
- i.MX95: 200MHz (IMX95CEC §4.11.7.3.2.3 Table 106)
- LX2160A: DTR disabled (FSPI_QUIRK_DISABLE_DTR)
Update related platform data with correct speed limation according
to datasheet.
Fixes: f43579ef35 ("spi: spi-nxp-fspi: limit the clock rate for different sample clock source selection")
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Link: https://patch.msgid.link/20260728-fspi-clock-v2-1-dbe786a4a6eb@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This is a relatively large set of updates, the biggest batch of things
is Charles' fixes for the SDCA code which have been through a number of
iterations on the list and deal with a bunch of issues that have been
seen as we get more real world usage of SDCA. We also have the usual
device specific fix and quirk traffic that we tend to see, there's a
small pile of fixes for the tas2562 driver since I saw some bugs while
reviewing fixes sent by Haidar Lee but it's nothing too remarkable.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmprOjEACgkQJNaLcl1U
h9AJeAgAhXykup5iskMuGCmHG3DxDZpHQOxcmvy6x4Afrn39yBVWD1CSkhSWRxHn
IT2GDOMQeHtZE0inMjQ66BX4EUsHg9jZTrvDPEjbscGrLNJdOsrfz1L+e1CTecyG
BgdDsfZFXrjDA/pSa3GtwvbH3YalGZLlmW4lk5PPWGwf7SjkqGj+Xea7kVu1uZrf
nnTC9Sso8siSE+dWapST+yRw6KYwhJndf33ruhjX1OkBfsEM/iDn/gpgJ550G/Xl
ffN12LIB8bDeEuW6svKvQ7OdGUIQds1OfhGngDaNKmMSEqUWGZP0VfxT1s6N8TTQ
5SWz3zAwXUpxkzUYXGQWgUOpkC3CUw==
=u8gI
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v7.2-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v7.2
This is a relatively large set of updates, the biggest batch of things
is Charles' fixes for the SDCA code which have been through a number of
iterations on the list and deal with a bunch of issues that have been
seen as we get more real world usage of SDCA. We also have the usual
device specific fix and quirk traffic that we tend to see, there's a
small pile of fixes for the tas2562 driver since I saw some bugs while
reviewing fixes sent by Haidar Lee but it's nothing too remarkable.
Replace irq_of_parse_and_map() calls with platform_get_irq_optional()
to fetch both IRQs in the probe function. This is a more portable
approach that works with both DT and non-DT platforms and follows
modern platform API conventions.
The -EPROBE_DEFER case is handled properly so deferred probe works
as expected, and invalid IRQ numbers are normalized to 0.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://patch.msgid.link/20260727194714.11354-1-rosenp@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
While attaching a newly created meter attach_meter() function makes
the new meter visible to other CPUs but can still fail afterwards.
On failure, it detaches the meter back and returns an error.
However, this is an unexpected behavior for the ovs_meter_cmd_set()
that uses a plain kfree(meter) on attach failure without waiting for
RCU readers to stop using it, assuming it was never visible.
This is never a problem for ovs-vswitchd as it always creates meters
before creating any flows that use them. But the UAF can be triggered
with a custom application using uAPI:
BUG: KASAN: slab-use-after-free in ovs_meter_execute (net/openvswitch/meter.c:653)
Read of size 8 at addr ffff88810d152650 by task meter/2508
Call Trace:
ovs_meter_execute (net/openvswitch/meter.c:653)
do_execute_actions (net/openvswitch/actions.c:1407)
ovs_execute_actions (net/openvswitch/actions.c:1584)
ovs_packet_cmd_execute (net/openvswitch/datapath.c:703)
...
netlink_sendmsg (af_netlink.c:1900)
Allocated by task 2519:
__kasan_kmalloc (mm/kasan/common.c:398 mm/kasan/common.c:415)
ovs_meter_cmd_set (net/openvswitch/meter.c:422)
...
netlink_sendmsg (af_netlink.c:1900)
Freed by task 2519:
kfree (mm/slub.c:2705 mm/slub.c:6405 mm/slub.c:6720)
ovs_meter_cmd_set (net/openvswitch/meter.c:479)
...
netlink_sendmsg (af_netlink.c:1900)
Fix that by making sure attach_meter() doesn't make the meter visible
until all the checks are done and the function can't fail anymore.
This also makes sure the "hash" value is calculated after the potential
re-sizing of the table.
Reported by Trend Micro's Zero Day Initiative as ZDI-CAN-31642.
Fixes: c7c4c44c9a ("net: openvswitch: expand the meters supported number")
Cc: stable@vger.kernel.org
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Reviewed-by: Eelco Chaudron <echaudro@redhat.com>
Link: https://patch.msgid.link/20260727121022.198461-1-i.maximets@ovn.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
ksz9131 is configured for local loopback in a similar fashion as the
ksz9031, with a need for full-duplex operation, but with some extra
steps to take as specified in section 4.13.1 :
1. Configure the following registers:
- MMD 1C, Register 15 = EEEE
- MMD 1C, Register 16 = EEEE
- MMD 1C, Register 18 = EEEE
- MMD 1C, Register 1B = EEEE
These 4 registers are marked as "Reserved" in the register map.
When setting loopback up without configuring these 4 registers, the PHY
appears to shut its RXC down, which can trigger failures on MACs that
require it, such as stmmac.
The datasheet does not specify to which state the registers must be
reset when disabling loopback, so let's restore them to their measured
initial values.
This was discovered when trying to use stmmac selftests on imx8mp with a
ksz9131 connected in RGMII.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260728075222.956780-1-maxime.chevallier@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The ipip fill_forward_path callback currently does not check for
configurations that cannot be offloaded to hardware:
- Collect metadata (flow-based) tunnels have no fixed destination
and rely on per-packet tunnel metadata, so the forward path
cannot be pre-computed.
- TOS inheritance (parms.iph.tos & 0x1) requires copying the outer
TOS from the inner packet at encapsulation time, which is not
known during forward path resolution.
Return -EOPNOTSUPP for both cases to fall back to the software
forwarding path.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260725-ipip-fill-forward-path-fix-v1-1-bc69fd3127d5@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Sang-Heon Jeon says:
====================
net: remove conditional returns with no effect
This series removes conditional returns where both branches return
the same value, so the check has no effect. As suggested by Jakub, the
netdev patches of the treewide v1 series [1] are posted separately.
All patches are generated by the Coccinelle script, which you can
find in v1.
The patch grouping is unchanged from v1. If you would rather split,
merge or drop any of the patches, just let me know and I will address
it in the next version.
[1] https://lore.kernel.org/all/20260723184538.3888637-1-ekffu200098@gmail.com/
---
Sang-Heon Jeon (4):
dpll: zl3073x: remove conditional return with no effect
net: ethernet: remove conditional return with no effect
net: remove conditional return with no effect
net: intel: remove conditional return with no effect
drivers/dpll/zl3073x/dpll.c | 6 +-----
drivers/dpll/zl3073x/out.c | 8 ++------
drivers/net/ethernet/amazon/ena/ena_netdev.c | 6 +-----
drivers/net/ethernet/aquantia/atlantic/aq_macsec.c | 6 +-----
drivers/net/ethernet/freescale/dpaa2/dpaa2-switch.c | 6 +-----
drivers/net/ethernet/freescale/gianfar.c | 6 +-----
drivers/net/ethernet/intel/i40e/i40e_main.c | 8 +-------
drivers/net/ethernet/intel/igb/e1000_i210.c | 6 +-----
drivers/net/ethernet/intel/igc/igc_phy.c | 6 +-----
drivers/net/ethernet/qlogic/netxen/netxen_nic_hw.c | 7 +------
drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c | 6 +-----
drivers/net/ethernet/renesas/rtsn.c | 7 +------
drivers/net/phy/microchip_t1.c | 6 +-----
drivers/net/pse-pd/tps23881.c | 6 +-----
14 files changed, 15 insertions(+), 75 deletions(-)
====================
Link: https://patch.msgid.link/20260725150852.859188-1-ekffu200098@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Both branches of the check return the same value, so the check has
no effect. Remove it and return the value directly.
This is the result of running the Coccinelle script from
scripts/coccinelle/misc/cond_return_no_effect.cocci.
Signed-off-by: Sang-Heon Jeon <ekffu200098@gmail.com>
Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Link: https://patch.msgid.link/20260725150852.859188-5-ekffu200098@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Both branches of the check return the same value, so the check has
no effect. Remove it and return the value directly.
This is the result of running the Coccinelle script from
scripts/coccinelle/misc/cond_return_no_effect.cocci.
Signed-off-by: Sang-Heon Jeon <ekffu200098@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260725150852.859188-4-ekffu200098@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Both branches of the check return the same value, so the check has
no effect. Remove it and return the value directly.
This is the result of running the Coccinelle script from
scripts/coccinelle/misc/cond_return_no_effect.cocci.
Signed-off-by: Sang-Heon Jeon <ekffu200098@gmail.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Arthur Kiyanovski <akiyano@amazon.com>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com> # for dpaa2-switch
Link: https://patch.msgid.link/20260725150852.859188-3-ekffu200098@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Both branches of the check return the same value, so the check has
no effect. Remove it and return the value directly.
This is the result of running the Coccinelle script from
scripts/coccinelle/misc/cond_return_no_effect.cocci.
Signed-off-by: Sang-Heon Jeon <ekffu200098@gmail.com>
Reviewed-by: Ivan Vecera <ivecera@redhat.com>
Link: https://patch.msgid.link/20260725150852.859188-2-ekffu200098@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Commit 14a8570564 ("sched/deadline: Use revised wakeup rule for
dl_server") applies the revised wakeup rule to any server, as a result
servers that are not running (dl_defer_running == 0) and start with a
deadline overflow get enqueued and can boost tasks as if they were
running, invalidating the defer rule and the documented state model.
Apply the revised wakeup rule only for deferrable servers that are
marked as running.
Fixes: 14a8570564 ("sched/deadline: Use revised wakeup rule for dl_server")
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Juri Lelli <juri.lelli@redhat.com>
Tested-by: Andrea Righi <arighi@nvidia.com>
Link: https://patch.msgid.link/20260522125833.264145-1-gmonaco@redhat.com
As noted in commit 85a2d4a890 ("x86,ibt: Use UDB instead of 0xEA") Jcc should
be assumed not-taken, however the normal kCFI (ABI) emits the following sequence:
movl $(-hash), %r10d
addl -15(%r11), %r10d
je 1f
ud2
1: cs call __x86_indirect_thunk_r11
(when used in conjunction with -mretpoline-external-thunk).
Notably, the Jcc here is always taken, resulting in lower throughput than would
be ideal. Replace it with the following sequence on boot:
movl $(-hash), %r10d
addl -15(%r11), %r10d
jne . + 3
test $0xd6, %al
cs call __x86_indirect_thunk_r11
This jumps to the UDB instruction used as an immediate byte in the test
instruction. The test instruction will clobber eflags, but that is immaterial,
eflags is already changed by the preceding addl.
Intel recommends the FineIBT sequence on platforms that support IBT; older
platforms are still widely used and would benefit from this.
An earlier PoC was benchmarked by Scott:
Indirect branch miss rate (br_misp_retired.indirect:k / br_inst_retired.indirect:k)
BHI_DIS_S=1
Benchmark Baseline IBT kCFI kCFI-opt
-----------------------------------------------------------------------------
iperf3 UDP 0.103764 0.103180 0.104311 0.102945
hackbench 0.000885 0.000876 0.001996 0.000826
lmbench syscall 0.005089 0.004486 0.016990 0.005852
lmbench fork+exit 0.018454 0.019176 0.031085 0.015153
lmbench fork+exec 0.017147 0.021613 0.029129 0.016337
redis 0.032220 0.032655 0.045540 0.027946
nginx+wrk 0.109033 0.112765 0.132557 0.102417
fio randread 0.009704 0.009620 0.008548 0.000962
fio seqwrite 0.006927 0.006707 0.019372 0.004590
kbuild 0.056748 0.057324 0.064640 0.048136
BHI_DIS_S=0
Benchmark Baseline IBT kCFI kCFI-opt
-----------------------------------------------------------------------------
iperf3 UDP 0.000077 0.000106 0.000186 0.000073
hackbench 0.000123 0.000132 0.000367 0.000097
lmbench syscall 0.023259 0.018319 0.040903 0.012772
lmbench fork+exit 0.011494 0.011887 0.029079 0.016415
lmbench fork+exec 0.037782 0.038994 0.055378 0.026381
redis 0.002481 0.003152 0.017073 0.000184
nginx+wrk 0.015478 0.016266 0.033637 0.000268
fio randread 0.009836 0.007949 0.007096 0.000143
fio seqwrite 0.014587 0.014165 0.041792 0.002157
kbuild 0.055774 0.055249 0.062590 0.046546
Suggested-by: Scott D Constable <scott.d.constable@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Link: https://patch.msgid.link/20260612071506.GQ187714%40noisy.programming.kicks-ass.net
remove_spares() and remove_and_add_spares() modify the array's rdev
configuration. These operations are only safe after the array has been
suspended.
md_start_sync() checks whether spare configuration changes are needed
before taking reconfig_mutex. However, the rdev state can change before
the mutex is acquired, so the initial check can become stale. In that
case, md_choose_sync_action() may remove or replace rdevs while normal
I/O is still accessing them.
The race can occur as follows:
raid10d Worker Normal IO
____________ _______________________ ______________________
raid10_write_request()
wait_blocked_dev()
set Blocked
set Faulty
Skip Faulty rdev
rrdev->nr_pending++
.repl_bio = bio
removeable_rdev = false .
array not suspended .
lock mddev goto err_handle
lock mddev (wait)
.
update sb .
clear Blocked .
.
unlock mddev .
lock mddev (acquires)
remove_spares()
removeable_rdev = true
raid10_remove_disk()
rdev = replacement
replacement = NULL
rdev_dec_pending(NULL)
unlock mddev (NULL)->nr_pending--
In this case, rdev_dec_pending() is called with a NULL pointer,
resulting in a NULL pointer dereference when attempting to decrement
nr_pending.
Fix this by suspending the array when spare configuration changes are
needed, including for non-read-write arrays, and checking again after
taking reconfig_mutex. If the array was not already suspended and a
change is now needed, release the mutex, suspend the array, and
reacquire the mutex before continuing.
Fixes: bc08041b32 ("md: suspend array in md_start_sync() if array need reconfiguration")
Reported-by: sashiko-bot <sashiko-bot@kernel.org>
Closes: https://sashiko.dev/#/patchset/20260628142420.1051027-1-abd.masalkhi@gmail.com?part=3
Signed-off-by: Abd-Alrhman Masalkhi <abd.masalkhi@gmail.com>
Reviewed-by: Yu Kuai <yukuai@fygo.io>
Link: https://patch.msgid.link/20260708112003.474537-1-abd.masalkhi@gmail.com
Signed-off-by: Yu Kuai <yukuai@fygo.io>
During link down event, we were doing netif_tx_stop_all_queues() first
and then netif_carrier_off(). This can cause a potential race since
carrier is still on during down event. This patch reverse the calling
order to fix the issue.
Fixes: 50fe6c02e5 ("octeontx2-pf: Register and handle link notifications")
Signed-off-by: Suman Ghosh <sumang@marvell.com>
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260724072831.2415281-1-rkannoth@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
