select_task_rq_scx() falls into the default path when the scheduler has no
ops.select_cpu or is bypassing. There it calls scx_select_cpu_dfl() and
direct-dispatches to the picked CPU's local DSQ.
While bypassing, neither does anything: the enqueue path routes the task to
a bypass DSQ before consulting the direct-dispatch target, so the direct
dispatch never happens, and the CPU pick at most shifts which CPU's bypass
DSQ receives the task. Worse, when the scheduler does its own idle tracking,
the built-in idle cpumasks the pick consults are not even updated, so it
doesn't work anyway.
Return prev_cpu without the default selection while bypassing and let the
bypass enqueue place the task.
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
check_rq_for_timeouts() blames a runnable stall on the task's owner. Under
a sub-scheduler hierarchy the stalled task can be sitting on a DSQ that a
different scheduler has to drain, e.g. an ancestor's bypass DSQ while the
owner is bypassing. The drainer then escapes blame while the owner is
exited, and when the owner's exit is already claimed, nothing actionable is
reported at all.
Blame the DSQ's owning scheduler instead. The local DSQ is consumed by the
cpu itself and keeps blame on the owner. Detection keeps the owner's timeout
and single-scheduler behavior is unchanged.
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Add support for a PCIe phys found on Qualcomm ipq5210 platform.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Varadarajan Narayanan <varadarajan.narayanan@oss.qualcomm.com>
Link: https://patch.msgid.link/20260721-pcie-phy-v5-2-8d403ef7e780@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The ipq5210 has one dual lane and one single lane PCIe phy.
The dual lane phy is similar to the dual lane phy present in ipq9574. Hence
qcom,ipq5210-qmp-gen3x2-pcie-phy is documented with ipq9574's dual lane phy
as fallback compatible.
The single lane phy (qcom,ipq5210-qmp-gen3x1-pcie-phy) is documented as
specific compatible as it uses a combination of its own initialization
tables and some of the existing tables.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Varadarajan Narayanan <varadarajan.narayanan@oss.qualcomm.com>
Link: https://patch.msgid.link/20260721-pcie-phy-v5-1-8d403ef7e780@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Propagate clk_prepare_enable() failures to the caller instead of
returning success, and disable the reference clock on initialization
error paths to avoid leaking clock references when phy_exit() is not
called.
Fixes: 25d7008335 ("phy: xilinx: phy-zynqmp: dynamic clock support for power-save")
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Reviewed-by: Michal Simek <michal.simek@amd.com>
Link: https://patch.msgid.link/20260720153832.1130006-2-radhey.shyam.pandey@amd.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add init sequence and phy configuration for the Super Speed port on Shikra
SoC. Also since Shikra uses 3 resets, add support for the third reset and
configure Shikra platform data to use 3 resets.
Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20260712-usb-shikra-phy-v6-v6-4-1b3e51bf1541@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add init sequence and phy configuration for Shikra. Since the init
sequence is same as that of QCS615, reuse the existing init table in
Shikra.
Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20260712-usb-shikra-phy-v6-v6-3-1b3e51bf1541@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Declare the USB-C QMP PHY present on the Qualcomm Shikra SoC. Shikra uses
3 resets to be programmed before initialising the phy. As per the hardware
documentation, the third reset is PHY_PRIM_SP0_BCR, hence naming it "phy".
Also, add remote endpoints and orientation switch support for getting
Type-C orientation information.
Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260712-usb-shikra-phy-v6-v6-2-1b3e51bf1541@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
zone_movable_pfn is zero-initialized and only set by
find_zone_movable_pfns_for_nodes(), which runs once during boot right
after the memset, so the memset has no effect.
Remove redundant memset. No functional change.
Signed-off-by: Sang-Heon Jeon <ekffu200098@gmail.com>
Link: https://patch.msgid.link/20260720150915.756749-1-ekffu200098@gmail.com
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Per DP 1.4a section 2.2.4.3, the MSA MISC1 VSC_SDP bit signals that
the sink should defer colorimetry to the VSC SDP. It should only be set
when the sink advertises DP_VSC_SDP_EXT_FOR_COLORIMETRY_SUPPORTED and a
VSC SDP with pixel encoding/colorimetry payload will actually be sent.
Fold the colorimetry_support check into intel_dp_needs_vsc_colorimetry()
so both intel_ddi_set_dp_msa() and intel_dp_compute_vsc_sdp() share a
single consistent gate.
Assisted-by: GitHub_Copilot:claude-sonnet-4.6
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Pranay Samala <pranay.samala@intel.com>
Link: https://patch.msgid.link/20260709113951.3557968-3-chaitanya.kumar.borah@intel.com
The function answers whether a VSC SDP with colorimetry and pixel
encoding payload is required by the content being displayed.
Rename it to reflect that.
No functional change intended.
Assisted-by: GitHub_Copilot:claude-sonnet-4.6
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Pranay Samala <pranay.samala@intel.com>
Link: https://patch.msgid.link/20260709113951.3557968-2-chaitanya.kumar.borah@intel.com
The intention of the code is to extract the PCCR8_SGMIIa_CFG field out
of the "pccr" value, not to create a new value with the PCCR8_SGMIIa_CFG
field set to the "pccr" value.
Since FIELD_GET() is implemented as ((reg) & (mask)) >> __bf_shf(mask)
and FIELD_PREP() as (val) << __bf_shf(mask)) & (mask) and since "mask"
is GENMASK(2, 0), in practice there is no functional difference between
FIELD_GET() and FIELD_PREP(). But FIELD_GET() is logically the correct
helper.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20260612125731.133330-1-vladimir.oltean@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
HPAGE_PMD_SHIFT expands to BUILD_BUG() when CONFIG_PGTABLE_HAS_HUGE_LEAVES
is not set, causing a compile error when both CONFIG_TRANSPARENT_HUGEPAGE
and CONFIG_HUGETLB_PAGE are disabled:
drivers/gpu/drm/drm_pagemap.c:480:12: error: call to '__compiletime_assert_458'
declared with 'error' attribute: BUILD_BUG failed
480 | order = HPAGE_PMD_ORDER;
| ^
include/linux/huge_mm.h:117:26: note: expanded from macro 'HPAGE_PMD_ORDER'
117 | #define HPAGE_PMD_ORDER (HPAGE_PMD_SHIFT-PAGE_SHIFT)
| ^
include/linux/huge_mm.h:113:28: note: expanded from macro 'HPAGE_PMD_SHIFT'
113 | #define HPAGE_PMD_SHIFT ({ BUILD_BUG(); 0; })
Define DRM_PAGEMAP_PMD_ORDER, which maps to HPAGE_PMD_ORDER when
CONFIG_ARCH_ENABLE_THP_MIGRATION is enabled and to -1 otherwise.
This is safe because all code paths that use DRM_PAGEMAP_PMD_ORDER are
reachable only when CONFIG_ARCH_ENABLE_THP_MIGRATION is enabled.
Fixes: 139ab31aea ("drm/pagemap: Correct cpages calculation for migrate_vma_setup")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/r/202607201914.LpAGsbXs-lkp@intel.com/
Cc: Jan Stancek <jstancek@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Tested-by: Jan Stancek <jstancek@redhat.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://patch.msgid.link/20260721223244.1102276-1-matthew.brost@intel.com
DRM pagemap overloads the migration PFN array to store driver-provided
PFNs before calling migrate_vma_*() to finalize the migration. If an
error occurs during the incremental copy phase, the migration PFN
entries are reverted to their original state. After reverting the
device-folio mutations, clear any remaining driver-provided PFNs to
avoid confusing the migrate_vma_*() helpers.
Also clear any driver-provided PFNs if populate_devmem_pfn() fails, as
a precaution against stale entries being interpreted as migration PFNs.
Reported-by: Sashiko <sashiko-bot@kernel.org>
Fixes: 3902846af3 ("drm/pagemap Fix error paths in drm_pagemap_migrate_to_devmem")
Fixes: ec265e1f1c ("drm/pagemap: Support source migration over interconnect")
Cc: stable@vger.kernel.org
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://patch.msgid.link/20260721204353.1082632-1-matthew.brost@intel.com
The PCIe Controller in the J7200 SoC supports a 4-lane configuration.
However, j7200_pcie_rc_data and j7200_pcie_ep_data incorrectly set
.max_lanes = 2, limiting operation to fewer lanes than the hardware
supports.
Set .max_lanes = 4 for both j7200_pcie_rc_data and j7200_pcie_ep_data to
match the hardware capability.
See J7200 Technical Reference Manual (SPRUIU1D), section 12.2.3.1.1
for further details: https://www.ti.com/lit/pdf/spruiu1d
Fixes: 3ac7f14084 ("PCI: j721e: Add per platform maximum lane settings")
Signed-off-by: Takuma Fujiwara <t-fujiwara1@ti.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Link: https://patch.msgid.link/20260721155743.3347659-1-t-fujiwara1@ti.com
From PTL onwards, the set context latency can be in the vactive region,
letting the safe window start some lines before the vblank start. The DSB
waits on this safe window instead of vblank (bits [15:14] select the safe
window signal from the DPT unit to start the DMA engine).
With modes that have a smaller vblank region, the computed guardband is
clamped to the vblank length, making the undelayed and delayed vblank
coincide. If the SCL is also 0, the 'safe window' becomes effectively 0,
and the DSB configured to wait for it gets stalled, since the hardware
never signals the safe window, leading to:
*ERROR* [CRTC:159:pipe A] flip_done timed out
*ERROR* [CRTC:159:pipe A] DSB 0 timed out waiting for idle
Keep the set context latency at a minimum of 1 to avoid this.
v2: Fix the bit numbers and correct the commit message. (Chaitanya)
Fixes: 4a68c7516c ("drm/i915/dsb: Use safe window path when VRR TG is used")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Assisted-by: GitHub-Copilot:Claude-Opus-4.8
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Link: https://patch.msgid.link/20260722062449.1166411-1-ankit.k.nautiyal@intel.com
GPIO 14 on the fio_ioexp (pca9555) controller corresponds to the
PWRGD_RMC_N signal, which is active-low.
The pwrgd-rmc-hog node currently specifies output-low for this GPIO
with GPIO_ACTIVE_LOW flags. Under Linux gpiolib, configuring an
active-low GPIO hog with output-low sets the logical value to inactive
(0), causing the subsystem to drive the physical line high.
Correct the hog configuration to output-high, which sets the logical
value to active (1), driving the physical pin low on boot as intended.
[arj: tidy subject line]
Signed-off-by: Potin Lai <potin.lai.pt@gmail.com>
Link: https://patch.msgid.link/20260716-upstream-sanmiguel-fix-pwrgd-rmc-n-v1-1-8287b306e02a@gmail.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
srpt_handle_cmd() maps the initiator-supplied srp_cmd->task_attr into
cmd->sam_task_attr, but then hands a hardcoded TCM_SIMPLE_TAG to
target_init_cmd().
Pass the already mapped cmd->sam_task_attr instead, so target core sees the
attribute the initiator requested.
Fixes: 9474b04313 ("ib_srpt: Convert I/O path to target_submit_cmd + drop legacy ioctx->kref")
Link: https://patch.msgid.link/20260721-b4-scsi-ordering-violation-due-to-hardc-v1-1-07205aab71bb@nvidia.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
During reset recovery, mt7925_vif_connect_iter() replays firmware state
for links tracked in mvif->valid_links. After MLO link changes or MCU
timeout recovery, the driver bitmap can temporarily contain a link whose
mac80211 bss_conf has already gone away.
This can pass a NULL bss_conf to mt76_connac_mcu_uni_add_dev(), matching
the crash where x1, the second argument, is NULL:
pc : mt76_connac_mcu_uni_add_dev+0x8c/0x1f8 [mt76_connac_lib]
lr : mt7925_vif_connect_iter+0x9c/0x168 [mt7925_common]
x2 : ffffff80a77f6018 x1 : 0000000000000000 x0 : ffffff8099402080
Call trace:
mt76_connac_mcu_uni_add_dev+0x8c/0x1f8 [mt76_connac_lib]
mt7925_vif_connect_iter+0x9c/0x168 [mt7925_common]
mt7925_mac_reset_work+0x264/0x2f8 [mt7925_common]
Skip missing bss_conf entries before replaying the link. Non-MLO AP/STA
reset replay is unchanged because the helper still returns &vif->bss_conf
for the legacy link.
Fixes: 1406199418 ("wifi: mt76: mt7925: add link handling in mt7925_vif_connect_iter")
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Link: https://patch.msgid.link/20260616161016.19346-1-sean.wang@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
There is a new build failure with MT7996E=m MT76_CORE=y and NET_AIROHA_NPU=m:
ld.lld: error: undefined symbol: airoha_npu_get
ld.lld: error: undefined symbol: airoha_npu_put
>>> referenced by npu.c
>>> drivers/net/wireless/mediatek/mt76/npu.o:(mt76_npu_init) in archive vmlinux.a
Fix this by reworking the dependency for the MT7996_NPU to only
allow enabling that when mt76_core can link against the npu driver.
To make sure this gets caught more easily in the future when additional
mt76 variants need the same dependency, also turn CONFIG_MT76_NPU into
a tristate symbol that has the same dependency.
Fixes: 7fb554b1b6 ("wifi: mt76: Introduce the NPU generic layer")
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20260612201519.4054683-1-arnd@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
mt76_npu_device_active() and mt76_ppe_device_active() read dev->mmio.npu
and dev->mmio.ppe_dev. The mmio, usb and sdio bus structs share a union in
struct mt76_dev, so on USB and SDIO these read unrelated data from the
usb/sdio struct, which is non-NULL in practice.
mt76_npu_device_active() then returns true on USB, and
mt76_rx_poll_complete() takes the offload path and skips
mt76_rx_aggr_reorder(). RX A-MPDU subframes are delivered out of order and
the peer's TCP stack treats that as loss: heavy retransmissions and reduced
throughput in AP mode. Seen on mt7921u, mt7925u, mt76x2u and mt76x0u.
Gate both helpers on mt76_is_mmio() so they only run for the bus type that
owns the mmio union member.
Fixes: 7fb554b1b6 ("wifi: mt76: Introduce the NPU generic layer")
Cc: stable@vger.kernel.org
Tested-by: Nick Morrow <morrownr@gmail.com>
Signed-off-by: Devin Wittmayer <lucid_duck@justthetip.ca>
Link: https://patch.msgid.link/20260720232640.41293-1-lucid_duck@justthetip.ca
Signed-off-by: Felix Fietkau <nbd@nbd.name>
mt7915_mcu_bss_he_tlv() and mt7915_mcu_sta_bfer_tlv() both run after
checking HE support, then dereference the HE PHY capability returned by
mt76_connac_get_he_phy_cap(). That helper can return NULL when no
capability entry matches the vif type.
Fetch the capability before appending the TLV and skip the HE-specific
setup when no matching capability is available.
Fixes: e6d557a78b ("mt76: mt7915: rely on mt76_connac_get_phy utilities")
Signed-off-by: Ruoyu Wang <ruoyuw560@gmail.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260620155332.81120-1-ruoyuw560@gmail.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
mt7925_sta_set_decap_offload() iterates over the vif valid_links mask
when updating decap offload state for an MLO station. The station may not
have a link STA for every valid link of the vif, so mt792x_sta_to_link()
can return NULL for a link that belongs to the vif but not to the station.
The function currently dereferences mlink before checking whether the
link WCID is ready. If mlink is NULL, setting or clearing
MT_WCID_FLAG_HDR_TRANS dereferences a NULL pointer.
Skip links without a station link before touching mlink->wcid.
Fixes: b859ad6530 ("wifi: mt76: mt7925: add link handling in mt7925_sta_set_decap_offload")
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Link: https://patch.msgid.link/20260708075539.726200-1-lgs201920130244@gmail.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Unloading the mt7915e module with a MT7916 triggers multiples WARN in
__netif_napi_del_locked() and in page_pool_disable_direct_recycling()
because the driver does not disable the napi before destroying it.
This is troublesome since on MT7916 it is required to unload the module
and reinsert it with a different enable_6ghz parameter to change the
frequency. The system generally becomes unstable after reinserting the
module.
Fix it by disabling napi before deleting it. Also, do not delete napi
on WED queues since napi is neither used nor initialized on them.
Fixes: 17f1de56df ("mt76: add common code shared between multiple chipsets")
Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
Link: https://patch.msgid.link/20260708144615.24092-1-nicolas.cavallari@green-communications.fr
Signed-off-by: Felix Fietkau <nbd@nbd.name>
PKT_TYPE_TXRX_NOTIFY is an mmio-only event, but mt7615_rx_check() and
mt7615_queue_rx_skb() dispatch it to mt7615_mac_tx_free() on every bus.
mt7615_mac_tx_free() cleans the DMA tx queues with
mt76_queue_tx_cleanup(), which calls queue_ops->tx_cleanup(). Only the
mmio queue ops implement that callback; on the mt7663 USB and SDIO
buses it is NULL, so a TXRX_NOTIFY there calls a NULL pointer in the RX
worker. Same defect as the mt7921 and mt7925 patches in this series.
Drop the event on non-mmio buses via mt76_is_mmio(), as in
commit 5683e1488a ("wifi: mt76: connac: do not check WED status for
non-mmio devices").
Fixes: eb99cc95c3 ("mt76: mt7615: introduce mt7663u support")
Cc: stable@vger.kernel.org
Signed-off-by: Devin Wittmayer <lucid_duck@justthetip.ca>
Link: https://patch.msgid.link/20260627191336.20223-4-lucid_duck@justthetip.ca
Signed-off-by: Felix Fietkau <nbd@nbd.name>
PKT_TYPE_TXRX_NOTIFY is an mmio-only event, but mt7925_rx_check() and
mt7925_queue_rx_skb() dispatch it to mt7925_mac_tx_free() on every bus.
mt7925_mac_tx_free() cleans the DMA tx queues with
mt76_queue_tx_cleanup(), which calls queue_ops->tx_cleanup(). Only the
mmio queue ops implement that callback; on USB it is NULL, so a
TXRX_NOTIFY there calls a NULL pointer in the RX worker:
BUG: kernel NULL pointer dereference, address: 0000000000000000
RIP: 0010:0x0
Call Trace:
mt7925_mac_tx_free+0x58/0x350 [mt7925_common]
mt7925_rx_check+0xe2/0x130 [mt7925_common]
mt76u_rx_worker+0x1b9/0x620 [mt76_usb]
Drop the event on non-mmio buses via mt76_is_mmio(), as in
commit 5683e1488a ("wifi: mt76: connac: do not check WED status for
non-mmio devices").
Fixes: c948b5da6b ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips")
Cc: stable@vger.kernel.org
Signed-off-by: Devin Wittmayer <lucid_duck@justthetip.ca>
Link: https://patch.msgid.link/20260627191336.20223-3-lucid_duck@justthetip.ca
Signed-off-by: Felix Fietkau <nbd@nbd.name>
PKT_TYPE_TXRX_NOTIFY is an mmio-only event, but mt7921_rx_check() and
mt7921_queue_rx_skb() dispatch it to mt7921_mac_tx_free() on every bus.
mt7921_mac_tx_free() cleans the DMA tx queues with
mt76_queue_tx_cleanup(), which calls queue_ops->tx_cleanup(). Only the
mmio queue ops implement that callback; on USB and SDIO it is NULL, so
a TXRX_NOTIFY there calls a NULL pointer in the RX worker:
BUG: kernel NULL pointer dereference, address: 0000000000000000
RIP: 0010:0x0
Call Trace:
mt7921_mac_tx_free+0x64/0x310 [mt7921_common]
mt7921_rx_check+0x5f/0xf0 [mt7921_common]
mt76u_rx_worker+0x1b9/0x620 [mt76_usb]
Drop the event on non-mmio buses via mt76_is_mmio(), as in
commit 5683e1488a ("wifi: mt76: connac: do not check WED status for
non-mmio devices").
Fixes: 48fab5bbef ("mt76: mt7921: introduce mt7921s support")
Cc: stable@vger.kernel.org
Signed-off-by: Devin Wittmayer <lucid_duck@justthetip.ca>
Link: https://patch.msgid.link/20260627191336.20223-2-lucid_duck@justthetip.ca
Signed-off-by: Felix Fietkau <nbd@nbd.name>
The interrupt properties for fio_ioexp (pca9555 on i2c14) were incorrectly
configured to gpio1 with ASPEED_GPIO(B, 6).
Update the interrupt-parent to gpio0 and the interrupt pin to
ASPEED_GPIO(C, 6) according to the hardware specification.
Signed-off-by: Potin Lai <potin.lai.pt@gmail.com>
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Since the original email account is no longer in
use, I have updated it to my current email address.
Signed-off-by: Hongbo Li <hongbohbli@tencent.com>
Acked-by: Chao Yu <chao@kernel.org>
Acked-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
dev->stats fields can be updated concurrently from multiple CPUs
without synchronization.
Use DEV_STATS_INC() for stats increments and DEV_STATS_READ()
when reading dev->stats in ppp_get_stats64() and ppp_get_stats()
to avoid data races.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Qingfang Deng <qingfang.deng@linux.dev>
Link: https://patch.msgid.link/20260715055541.1147542-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In cifs_close_deferred_file(), cifs_close_all_deferred_files(), and
cifs_close_deferred_file_under_dentry(), when a pending deferred close
is cancelled via cancel_delayed_work(), the subsequent kmalloc_obj() to
add the file to the local processing list may fail under memory pressure.
The loop breaks immediately, but the cancelled work is no longer pending
(it would have called _cifsFileInfo_put()), and the cfile is never added
to file_head for processing. The cifsFileInfo reference and the open
server handle both leak.
Fix by saving the cfile that failed allocation in a local variable,
breaking as before, and calling _cifsFileInfo_put() on it after
releasing the lock. Any files later in the iteration are unaffected
since their deferred work is still pending and will fire normally.
Fixes: e3fc065682 ("cifs: Deferred close performance improvements")
Signed-off-by: Frank Sorenson <sorenson@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Windows Server's directory enumeration metadata lags behind the actual
file size after a write+close or rename. A concurrent readdir() in the
window between close() returning to userspace and stat() being called
overwrites the correct cached i_size with the stale server value, causing
stat() to return the wrong size.
Once _cifsFileInfo_put() removes the last writable handle from
openFileList, is_size_safe_to_change() permits readdir to overwrite
i_size. smb2_close_getattr() then stamps cifs_i->time = jiffies, making
the corrupt cached value appear fresh to the next stat().
The existing check (see Fixes:) only blocked stale size updates while
an active RW lease was held, not after the last writable handle closes.
Add cifsInodeInfo->time_last_write, written via smp_store_release() at
writable close and on setattr/truncate. is_size_safe_to_change() checks
is_inode_writable() first (acquiring open_file_lock), then rejects a
readdir size update if time_last_write falls within acregmax jiffies.
The spinlock release in _cifsFileInfo_put() forms a store-release barrier
that pairs with the spin_lock() (load-acquire) in is_inode_writable(),
ensuring the subsequent smp_load_acquire() on time_last_write observes
any update from a concurrent close(). When a size update is rejected and
the server value differs from the cached one, cifs_i->time is cleared to
force a fresh QUERY_INFO on the next stat().
readdir is also blocked from changing i_size while writable handles are
open or an RW lease is held, even on direct-IO mounts.
For deferred close (closetimeo > 0), time_last_write is refreshed at the
actual server close in smb2_deferred_work_close() and in the
cifs_close_deferred_file*() drain paths invoked by lease/oplock breaks
and tcon teardown, anchoring the protection window to the real close time
rather than the earlier userspace close.
time_last_write == 0 skips the time_before() check to avoid false
positives near boot on 32-bit systems where jiffies starts close to
INITIAL_JIFFIES.
Does not reproduce against Samba or with actimeo=0.
Fixes: e4b61f3b1c ("cifs: prevent updating file size from server if we have a read/write lease")
Signed-off-by: Frank Sorenson <sorenson@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
intel_mac_finish() is registered as the phylink mac_finish()
callback for the Elkhart Lake SGMII ports. phylink calls it at
the end of every major link reconfiguration, including the
initial one during probe.
The callback selects the PMC ModPHY LCPLL programming for the
requested MAC-side interface and then power-cycles the SerDes.
On Elkhart Lake that ModPHY is also used by the on-die AHCI
SATA PHY. Reapplying the programming during the initial
boot-time link-up disturbs the shared analog block while it is
still driving SATA, so the SATA link fails to train:
ata1: SATA link down (SStatus 1 SControl 300)
The disk carrying the root filesystem is never detected and the
system hangs at rootwait. Ethernet itself comes up normally,
which makes the failure look unrelated to the network driver.
Before mac_finish() runs, the legacy SerDes power-up path has
already programmed SERDES_GCR0 for the current interface. The
1G and 2.5G ModPHY tables selected by mac_finish() correspond
to the SerDes lane rate, so read that rate back from SERDES_GCR0
and skip the PMC reprogramming and SerDes power-cycle when it
already matches the selected interface.
This keeps the disruptive reprogramming out of the boot path
when the SerDes is configured correctly, while preserving the
previous behavior when a real SGMII/1000BASE-X to 2500BASE-X
rate change is needed. If the register read fails, reconfigure
as before.
Fixes: a42f6b3f1c ("net: stmmac: configure SerDes according to the interface mode")
Cc: stable@vger.kernel.org
Signed-off-by: Markus Breitenberger <bre@keba.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20260713171619.192452-1-bre@breiti.cc
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remove extra variable in `set/get_property`-functions that is only
supplied directly to other functions. The value is not used for anything
else.
Moreover, wrap these lines. Otherwise `checkpatch` warns about too long
lines.
Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
Link: https://patch.msgid.link/6b4367512dfad62e865de8b6be52eefd5385fa26.1782746851.git.waqar.hameed@axis.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
To pick up the changes in:
103ff3a50e ("KVM: s390: Add capability to support 2G hugepages")
229132c309 ("LoongArch: KVM: Add DMSINTC device support")
2619da73bb ("KVM: x86: Use __DECLARE_FLEX_ARRAY() for UAPI structures with VLAs")
4aebd7d5c7 ("KVM: s390: Add KVM capability for ESA mode guests")
4f256d5770 ("KVM: x86: nSVM: Save/restore gPAT with KVM_{GET,SET}_NESTED_STATE")
822790ab01 ("KVM: x86: Define KVM_X86_QUIRK_NESTED_SVM_SHARED_PAT")
8800dbf661 ("KVM: arm64: Allow userspace to create protected VMs when pKVM is enabled")
bf8f3cec93 ("KVM: s390: vsie: Refactor handle_stfle")
c547c51ff4 ("KVM: arm64: gic-v5: Add ARM_VGIC_V5 device to KVM headers")
d7507a94a0 ("KVM: SVM: Treat exit_code as an unsigned 64-bit value through all of KVM")
This addresses these perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h
diff -u tools/arch/x86/include/uapi/asm/kvm.h arch/x86/include/uapi/asm/kvm.h
diff -u tools/arch/x86/include/uapi/asm/svm.h arch/x86/include/uapi/asm/svm.h
diff -u tools/arch/s390/include/uapi/asm/kvm.h arch/s390/include/uapi/asm/kvm.h
Please see tools/include/uapi/README for further details.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick up the changes in:
45e57cfb7b ("fs: Clarify FS_CASEFOLD_FL semantics in UAPI header")
That don't result in changes to the string tables generated from this header.
This addresses this perf build warning:
Warning: Kernel ABI header differences:
diff -u tools/perf/trace/beauty/include/uapi/linux/fs.h include/uapi/linux/fs.h
Please see tools/include/uapi/README for further details.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick up the changes in:
4987a5763f ("net: block MSG_NO_SHARED_FRAGS in sendmsg()")
That don't result in changes to the string tables generated from this header.
This addresses this perf build warning:
Warning: Kernel ABI header differences:
diff -u tools/perf/trace/beauty/include/linux/socket.h include/linux/socket.h
Please see tools/include/uapi/README for further details.
Cc: Jann Horn <jannh@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
