Add a regression test for the out-of-bounds bit operations on
struct mt_device.mt_io_flags.
A HID multitouch device can advertise a ContactCountMaximum far larger
than the number of contacts a single report describes, up to 255. The
driver used to keep the per-slot active state in the bits of a single
unsigned long and index set_bit()/clear_bit() by the slot number, so such
a device drove those operations out of bounds. The sticky-fingers release
timer made it fatal: mt_release_contacts() cleared one bit per slot and
overwrote the adjacent members of struct mt_device.
The new device advertises a ContactCountMaximum of 250 while exposing only
a few finger collections (a large contact count cannot be expressed with
one finger collection per contact within the HID descriptor size limit).
The test sends a single contact and lets the 100ms sticky-fingers timer
release it. A kernel without the fix panics in mt_release_contacts(); a
fixed kernel reports the release cleanly.
Signed-off-by: Trung Nguyen <trungnh@cystack.net>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
mt_io_flags is a single unsigned long, but mt_process_slot(),
mt_release_pending_palms() and mt_release_contacts() use it as a
per-slot bitmap indexed by the slot number. That slot number is only
bounded by td->maxcontacts, which is taken from the device's
ContactCountMaximum feature report and can be up to 255, not by
BITS_PER_LONG.
As a result, a multitouch device that advertises a large contact count
makes set_bit()/clear_bit() operate past the mt_io_flags word and
corrupt the adjacent members of struct mt_device. The sticky-fingers
release timer is the easiest way to reach this. mt_release_contacts()
runs
for (i = 0; i < mt->num_slots; i++)
clear_bit(i, &td->mt_io_flags);
with num_slots == maxcontacts. For maxcontacts around 250 the loop
clears the bits that overlap td->applications.next, zeroing that list
head, and the list_for_each_entry() that immediately follows then
dereferences NULL. The kernel panics from timer (softirq) context. On a
KASAN build this shows up as a general protection fault in
mt_release_contacts() with a null-ptr-deref at offset 0x58, which is
offsetof(struct mt_application, num_received).
The state is reachable from an untrusted USB or Bluetooth HID
multitouch device; no local privileges are required.
Store the per-slot active state in a separately allocated bitmap sized
for maxcontacts, the same pattern already used for pending_palm_slots,
and keep only MT_IO_FLAGS_RUNNING in mt_io_flags. The two
"mt_io_flags & MT_IO_SLOTS_MASK" arming checks become
bitmap_empty(td->active_slots, td->maxcontacts).
Move MT_IO_FLAGS_RUNNING back to bit 0. It was bumped to bit 32 by the
same commit to leave the low byte for the slot bits; with the slot bits
gone it fits in bit 0 again, which also keeps it within the unsigned
long on 32-bit.
Fixes: 46f781e0d1 ("HID: multitouch: fix sticky fingers")
Cc: stable@vger.kernel.org
Signed-off-by: Trung Nguyen <trungnh@cystack.net>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Leon Hwang says:
====================
bpf: Copy per-CPU map value padding in copy_map_value_long()
Sashiko reported [1]:
This is a pre-existing issue, but does iterating over per-CPU maps expose
uninitialized kernel heap memory?
When working with per-CPU maps, temporary buffers are allocated using kmalloc
without the __GFP_ZERO flag in functions like bpf_iter_init_array_map in
kernel/bpf/arraymap.c:
kernel/bpf/arraymap.c:bpf_iter_init_array_map() {
...
value_buf = kmalloc(buf_size, GFP_USER | __GFP_NOWARN);
...
}
This is also done in kernel/bpf/hashtab.c:bpf_iter_init_hash_map().
If the map contains a BTF record, bpf_obj_memcpy in include/linux/bpf.h
explicitly stops at map->value_size instead of filling the entire rounded-up
size:
include/linux/bpf.h:bpf_obj_memcpy() {
...
memcpy(dst + curr_off, src + curr_off, size - curr_off);
...
}
This fails to overwrite the padding bytes up to round_up(map->value_size, 8).
[1] https://lore.kernel.org/bpf/20260622150844.28C551F000E9@smtp.kernel.org/
===
For example,
struct map_uninit_value {
struct prog_test_ref_kfunc __kptr_untrusted *unref_ptr;
__u32 data;
} __attribute__((packed));
struct {
__uint(type, BPF_MAP_TYPE_PERCPU_ARRAY);
__type(key, int);
__type(value, struct map_uninit_value);
__uint(max_entries, 1);
} pcpu_array SEC(".maps");
There are 4 padding bytes in the kernel percpu_array map elements.
When lookup element from 'pcpu_array' map, for each CPU, the 4 padding
bytes memory allocated by syscall.c::map_lookup_elem():kvmalloc() could
be exposed to user space.
Without the fix, the selftest could fail with:
test_map_uninit_mem_exposure:FAIL:zeroed tail bytes unexpected memory
mismatch
actual:
2B 2B 2B 2B
expected:
00 00 00 00
====================
Link: https://patch.msgid.link/20260624155115.85196-1-leon.hwang@linux.dev
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
When lookup element from those per-CPU maps, which have special field
in their values and their value size is not equal to roundup(value_sz, 8),
the padding size of temporary non-zeroed kernel heap memory allocated by
kvmalloc should not be exposed to user space.
Without the fix:
test_map_uninit_mem_exposure:FAIL:zeroed tail bytes unexpected memory mismatch
actual:
2B 2B 2B 2B
expected:
00 00 00 00
Assisted-by: Codex:gpt-5.5
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20260624155115.85196-3-leon.hwang@linux.dev
In kernel, per-CPU map elements are stored with
round_up(map->value_size, 8) bytes. On UAPI lookup paths, it copies the
rounded size for each CPU into a temporary buffer.
However, copy_map_value_long() passes 'map->value_size' to
bpf_obj_memcpy(). When the map has special fields, bpf_obj_memcpy() copies
around those fields with memcpy(), and does not copy the tail padding
between 'map->value_size' and round_up(map->value_size, 8).
The temporary UAPI lookup buffers are allocated without __GFP_ZERO. As a
result, when the per-CPU map's value size is not equal to
round_up(map->value_size, 8), UAPI LOOKUP_ELEM and its variants can return
stale heap contents from that padding to user space. The same issue
applies to bpf_iter for per-CPU maps.
Pass round_up(map->value_size, 8) to bpf_obj_memcpy() from
copy_map_value_long(), so per-CPU maps both with and without special
fields copy the entire per-CPU slot. Remove the now redundant round_up()
from bpf_obj_memcpy()'s long_memcpy path.
Fixes: 448325199f ("bpf: Add copy_map_value_long to copy to remote percpu memory")
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20260624155115.85196-2-leon.hwang@linux.dev
Yichong Chen says:
====================
tools/bpf/bpftool: Fix vmlinux BTF state cleanup
This series fixes stale vmlinux BTF state in bpftool batch mode.
Patch 1 resets the map command cached vmlinux BTF pointer when the
command releases it, and avoids freeing the cached object from the
map lookup path.
Patch 2 resets the struct_ops command cached vmlinux BTF pointer and
dependent cached map info state after each struct_ops command.
Changes in v4:
- Add Emil's Reviewed-by tag to patch 1.
- Inline the struct_ops cleanup instead of adding a helper.
Changes in v3:
- Add Fixes tags to both patches.
Changes in v2:
- Fold the map lookup path fix into patch 1.
- Update patch 1 subject and commit message to cover map commands
rather than only map dump.
====================
Link: https://patch.msgid.link/12A35C14DA710D2E+20260624025055.1574875-1-chenyichong@uniontech.com
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
struct_ops frees the global btf_vmlinux object.
In batch mode, a later struct_ops command can reuse stale state.
Reset the BTF pointer and cached map info state.
Fixes: 65c9362859 ("bpftool: Add struct_ops support")
Signed-off-by: Yichong Chen <chenyichong@uniontech.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Link: https://lore.kernel.org/bpf/9F9017160ABE125F+20260624025055.1574875-3-chenyichong@uniontech.com
get_map_kv_btf() caches the vmlinux BTF object when a map uses
btf_vmlinux_value_type_id. map dump released that object when the
command completed, but left the global pointer stale.
The same cached object can also be returned to print_key_value(), which
freed it directly. That leaves btf_vmlinux dangling before the command
cleanup path runs.
Use free_map_kv_btf() for per-entry cleanup, and reset the cached
btf_vmlinux pointer when the map command releases the object. This keeps
batch mode from reusing a freed BTF object.
Fixes: 4e1ea33292 ("bpftool: Support dumping a map with btf_vmlinux_value_type_id")
Signed-off-by: Yichong Chen <chenyichong@uniontech.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Link: https://lore.kernel.org/bpf/9072F43B3F74DF91+20260624025055.1574875-2-chenyichong@uniontech.com
Commit 9080b97689 ("bpftool: Pass host flags to bootstrap libbpf")
started building the bootstrap libbpf with HOST_CFLAGS, stripping the
warning options that are unsuitable for that build by filtering out
-W -Wall -Wextra -Wformat -Wformat-signedness.
HOST_CFLAGS inherits EXTRA_WARNINGS, which includes -Wformat-security
and -Wformat-y2k. The filter drops -Wall and -Wformat (the latter being
what actually enables -Wformat), but leaves those two -Wformat-* children
in LIBBPF_BOOTSTRAP_CFLAGS. Building the bootstrap libbpf with it then
warns:
cc1: warning: '-Wformat-y2k' ignored without '-Wformat'
cc1: warning: '-Wformat-security' ignored without '-Wformat'
The warning is easy to miss in an in-tree build: tools/lib/bpf/Makefile
re-adds -Wall via "override CFLAGS += -Wall", which re-enables -Wformat
for the libbpf objects, so only libbpf's feature-detection probe (which
uses the passed CFLAGS verbatim) leaks the two warnings. The standalone
libbpf Makefile (github.com/libbpf/libbpf, used by the bpftool mirror)
instead uses "CFLAGS ?= ... -Wall", which the passed-in CFLAGS overrides,
so -Wall is never re-added and every bootstrap object warns.
Use a -Wformat% wildcard in the filter-out so the orphaned children are
removed together with the parent.
Fixes: 9080b97689 ("bpftool: Pass host flags to bootstrap libbpf")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Quentin Monnet <qmo@kernel.org>
Link: https://lore.kernel.org/bpf/20260630205418.3483969-1-andrii@kernel.org
Add basic version of mcf54415 DAC driver. DAC is embedded in the SoC and
DAC configuration registers are mapped in the internal IO address space.
The DAC accepts a 12-bit digital signal and creates a monotonic 12-bit
analog output varying from DAC_VREFL to DAC_VREFH. The DAC module
consists of a conversion unit, an output amplifier, and the associated
digital control blocks. Default register values for DAC_VREFL and DAC_VREFH
are respectively 0 and 0xfff, left untouched in this initial version.
This initial version of the driver is minimalistic, "output raw" only, to
be extended in the future. DMA and external sync are disabled, default mode
is high speed, default format is right-justified 12-bit on 16-bit word.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Angelo Dureghello <adureghello@baylibre.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
To identify the task most likely responsible for a stall, add
last_woken_worker (L: pool->lock) to worker_pool and record it in
kick_pool() just before wake_up_process(). This captures the idle
worker that was kicked to take over when the last running worker went to
sleep; if the pool is now stuck with no running worker, that task is the
prime suspect and its backtrace is dumped by show_pool_no_running_worker().
Using struct worker * rather than struct task_struct * avoids any
lifetime concern: workers are only destroyed via set_worker_dying()
which requires pool->lock, and set_worker_dying() clears
last_woken_worker when the dying worker matches.
show_cpu_pool_busy_workers() holds pool->lock while calling
sched_show_task(), so last_woken_worker is either NULL or points to a
live worker with a valid task. More precisely, set_worker_dying() clears
last_woken_worker before setting WORKER_DIE, so a non-NULL
last_woken_worker means the kthread has not yet exited and worker->task
is still alive.
Suggested-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Add RDMA_NLDEV_ATTR_RES_SUMMARY_ENTRY_MAX netlink attribute to expose
device resource limits (max_qp, max_cq, max_mr, max_pd, max_srq) in
the resource summary alongside the existing current count. This allows
userspace tools like iproute2's rdma to display resource usage in
curr/max format.
Expected output from "rdma resource show":
Before: 0: mlx5_0: qp 123 cq 45 mr 200 pd 10
After: 0: mlx5_0: qp 123/131072 cq 45/65536 mr 200/1000000 pd 10/32768
In JSON output, both "curr" and "max" fields will be provided so that
scripts can compute percentages if needed.
The new attribute is optional and backward compatible - old userspace
tools will simply ignore it.
Signed-off-by: Tao Cui <cuitao@kylinos.cn>
Link: https://patch.msgid.link/20260615003646.168704-1-cui.tao@linux.dev
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The driver supports a single chip variant only. Simplify the driver by
hard-coding the device properties instead of using the id_table's
abstraction for a single chip type and a lookup in a table with only one
entry.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Add support for the TMP119 temperature sensor, which has the same
programming model as the TMP117.
[rgantois: Commit log]
Signed-off-by: Wil Stark <wil_stark@keysight.com>
[rgantois: Rebased from v6.6.58 to v7.2-rc1]
Signed-off-by: Romain Gantois <romain.gantois@bootlin.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The TMP119 has the same register layout as the TMP117, and a better local
sensor accuracy. Add a compatible for it.
Use ti,tmp117 as a fallback compatible for ti,tmp119.
Signed-off-by: Romain Gantois <romain.gantois@bootlin.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The driver was introduced in 2021 and since then only supports a single
chip variant. Simplify the driver by hard-coding the device properties
instead of using the id_table's abstraction for a single chip type.
Also drop the write-only struct member dcfg and the then unused struct
definition.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
lcdif_attach_bridge() uses dev_err_probe() on all its error returns to
store a specific deferral message.
However its caller lcdif_load() calls dev_err_probe() again on error,
overwriting the specific deferral messages with a unique, unavoidably
generic, message.
Make the specific deferral message visible by using a plain 'return ret' on
the caller.
Acked-by: Liu Ying <victor.liu@nxp.com>
Link: https://patch.msgid.link/20260619-drm-lcdif-deferral-msg-v1-1-ce2392dca985@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
jpeg_v4_0_3_is_idle() initializes ret to false and then accumulates ring
idle status using &=. Since false & condition always remains false, the
function can never report the JPEG block as idle.
Initialize ret to true so the function returns true only when all JPEG
rings report RB_JOB_DONE.
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit e9df8e9d04)
Cc: stable@vger.kernel.org
prev_sink is unconditionally retained via dc_sink_retain at function
entry, but the DP alt mode timeout path inside SIGNAL_TYPE_DISPLAY_PORT
returns false without releasing prev_sink. All other return paths in the
function correctly call dc_sink_release(prev_sink), making this the only
missing cleanup.
Fixes: 54618888d1 ("drm/amd/display: break down dc_link.c")
Signed-off-by: WenTao Liang <vulab@iscas.ac.cn>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Link: https://patch.msgid.link/20260626124555.36910-1-vulab@iscas.ac.cn
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 45510cf662)
Cc: stable@vger.kernel.org
SMU13 reports SocketPowerLimitAc/Dc as the default power limit, but
MsgLimits.Power may carry a different firmware bound for the same PPT
throttler. Using only the socket limit for both min and max can therefore
expose an incorrect power range.
Keep the socket limit as the default, but derive the range from both values:
use the lower value for the min base and the higher value for the max base
before applying OD percentages. Keep the current limit query independent
from the cap calculation.
Fixes: 1eaf26db95 ("drm/amd/pm: fix smu13 power limit default/cap calculation")
Closes: https://gitlab.freedesktop.org/drm/amd/-/work_items/5419
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit f45bbf0f62)
Cc: stable@vger.kernel.org
Running RCCL unit tests on a system with a 64K PAGE_SIZE triggers
the following warning and causes the test to terminate on latest
upstream kernel:
WARNING: drivers/gpu/drm/amd/amdgpu/amdgpu_object.c:1335 at
amdgpu_bo_release_notify+0x1bc/0x280 [amdgpu],
CPU#18: rccl-UnitTests/33151
Call trace:
amdgpu_bo_release_notify
ttm_bo_release
amdgpu_gem_object_free
drm_gem_object_free
amdgpu_bo_unref
amdgpu_bo_create
amdgpu_bo_create_user
amdgpu_gem_object_create
amdgpu_amdkfd_gpuvm_alloc_memory_of_gpu
kfd_ioctl_alloc_memory_of_gpu
kfd_ioctl
sys_ioctl
The warning is triggered because
amdgpu_ttm_next_clear_entity() returns NULL when a clear buffer
operation is requested. This happens because the GART window
allocation for the default_entity, clear_entity and move_entity
fails during initialization.
Commit [1] introduced separate GART windows for the
default_entity, clear_entity and move_entity of each SDMA
instance. Their sizes are derived from
AMDGPU_GTT_MAX_TRANSFER_SIZE, which is currently defined as 1024
pages. This implicitly assumes a 4K PAGE_SIZE, where 1024 pages
correspond to a 4MB transfer. On a 64K PAGE_SIZE system, however,
the same value expands to 64MB.
The default_entity and clear_entity each allocate one
AMDGPU_GTT_MAX_TRANSFER_SIZE GART window, while the move_entity
allocates two such windows. This results in 16MB of GART space
per SDMA instance on a 4K PAGE_SIZE system, but 256MB per SDMA
instance on a 64K PAGE_SIZE system.
On an MI210 system with five SDMA instances and a 512MB GART
aperture, the total GART space required becomes 1.25GB,
exceeding the available GART aperture. Consequently, GART window
allocation fails, amdgpu_ttm_next_clear_entity() returns NULL,
and the above warning is triggered.
Redefine AMDGPU_GTT_MAX_TRANSFER_SIZE in bytes instead of page
units. Where a page count is required, convert it using
PAGE_SHIFT. This preserves the existing 4MB transfer size across
all PAGE_SIZE configurations while keeping GART window
allocations within the available GART aperture.
[1] https://lore.kernel.org/all/20260408100327.1372-3-pierre-eric.pelloux-prayer@amd.com/#t
Closes: https://gitlab.freedesktop.org/drm/amd/-/work_items/5435
Fixes: 897ee11ec0 ("drm/amdgpu: create multiple clear/move ttm entities")
Signed-off-by: Donet Tom <donettom@linux.ibm.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 27213b776a)
Cc: stable@vger.kernel.org
There were a few instances in kfd_chardev.c of kvzalloc being
used to allocate memory for an array.
Switch those to kvcalloc, which
- is the standard way of allocating a zero-initialized array
- does a check for the mul overflowing
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 60b048c93f)
Cc: stable@vger.kernel.org
It requires inputing the doorbell offset for MES firmware preempts the
userq, and adding the doorbell offset also keep aliging with the
union MESAPI__SUSPEND in MES firmware.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit bc434335ab)
Cc: stable@vger.kernel.org
Updating the union MESAPI__SUSPEND and union MESAPI__RESUME to
add the doorbell offset for suspending userq.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 5b58a2c120)
Cc: stable@vger.kernel.org
Updating the union MESAPI__SUSPEND and union MESAPI__RESUME to
add the doorbell offset for suspending userq.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 30af09db33)
Cc: stable@vger.kernel.org
For a short moment during alloc/free the userptr BO is not part of his VM,
so bo->vm_bo can be NULL.
Keep a reference to the VM root PD as parent of the userptr BO so that
we can always use that to wait for all submissions of the VM instead of
only the one involving the userptr BO.
Signed-off-by: Christian König <christian.koenig@amd.com>
Fixes: 91250893cb ("drm/amdgpu: fix waiting for all submissions for userptrs")
Closes: https://gitlab.freedesktop.org/drm/amd/-/work_items/5399
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 631849ff5d)
Cc: stable@vger.kernel.org
jpeg_v5_0_1_is_idle() initializes ret to false and then accumulates ring
idle status using &=. Since false & condition always remains false, the
function can never report the JPEG block as idle.
Initialize ret to true so the function returns true only when all JPEG
rings report RB_JOB_DONE.
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Reviewed-by: David (Ming Qiang) Wu <David.Wu3@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 680adf5fae)
Cc: stable@vger.kernel.org
This state can be reached via other means than physical moves, like PRT
bindings. Make the name match the actual purpose of the state.
Signed-off-by: Natalie Vock <natalie.vock@gmx.de>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 1f7a795fb9)
The "moved" VM state is a bit unfortunately named, because BOs can end
up in this state without being physically moved. While we need to
invalidate every mapping when BOs are physically moved, in some other
cases like PRT binds/unbinds there is no need to refresh mappings except
those affected by the bind.
Full invalidation of all BO mappings manifested as severe regressions in
PRT bind performance, which this patch fixes. The offending patch is
4cdbba5a16 ("drm/amdgpu: restructure VM state machine v4") in the
amd-staging-drm-next tree, although it has not yet propagated anywhere
else.
Fixes: 4cdbba5a16 ("drm/amdgpu: restructure VM state machine v4")
Closes: https://gitlab.freedesktop.org/drm/amd/-/work_items/5437
Signed-off-by: Natalie Vock <natalie.vock@gmx.de>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 0b2fa33b42)
Cc: stable@vger.kernel.org
[Why]
mod_hdcp_dump_binary_message() computed target_size (a uint32_t) as roughly
byte_size * msg_size and gated the whole write on buf_size >= target_size. A
large msg_size can overflow target_size, wrapping it to a small value that
passes the check while the loop still writes byte_size * msg_size bytes
into buf. All current callers pass small constants so this is not reachable
today, but the unchecked arithmetic should be hardened.
[How]
Drop the overflow-prone target_size precomputation and instead bounds-check the
output position on every iteration, stopping once the next entry would not leave
room for the trailing terminator. This cannot overflow and, for oversized
messages, dumps as much as fits rather than printing nothing.
Fixes: 4c283fdac0 ("drm/amd/display: Add HDCP module")
Assisted-by: Copilot:claude-opus-4.8
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit d0a775e5d7)
Cc: stable@vger.kernel.org
struct dc has grown large over time (most of it the two inlined
dc_scratch_space copies) and now sits close to the page allocator's 4 MiB
contiguous allocation limit. Its actual size is not fixed by the source
alone, it also depends on the compiler and the .config, so it can easily
cross 4 MiB, e.g. with a newer GCC or a config change.
dc_create() allocates it with kzalloc(). Once struct dc exceeds 4 MiB the
request is rounded up to order 11 (8 MiB), which is above MAX_PAGE_ORDER,
so the page allocator warns and returns NULL. dc_create() then fails, DM
init fails and amdgpu probe aborts with -EINVAL:
WARNING: mm/page_alloc.c:5197 at __alloc_frozen_pages_noprof+0x2f9/0x380
dc_create+0x38/0x660 [amdgpu]
amdgpu_dm_init+0x2d9/0x510 [amdgpu]
dm_hw_init+0x1b/0x90 [amdgpu]
amdgpu_device_init.cold+0x150d/0x1e13 [amdgpu]
amdgpu_driver_load_kms+0x19/0x80 [amdgpu]
amdgpu_pci_probe+0x1e2/0x4c0 [amdgpu]
dc_create() then returns NULL and DM init fails, which aborts the whole
GPU init and makes amdgpu probe fail with -EINVAL ("hw_init of IP block
<dm> failed -22"), leaving the display unusable. The subsequent
amdgpu_irq_put() warnings during teardown are just fallout of unwinding
a half-initialized device.
struct dc is a software-only bookkeeping structure that is never handed
to hardware DMA and is only ever kept as an opaque pointer, so it does
not require physically contiguous memory. Allocate it with kvzalloc()
(and free it with kvfree()) so that the allocator can fall back to
vmalloc() when a contiguous allocation of that size is not available,
which also avoids the MAX_PAGE_ORDER warning entirely.
v2:
- Rebase to amd-staging-drm-next.
Closes: https://gitlab.freedesktop.org/drm/amd/-/work_items/5406
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Honglei Huang <honghuan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 991e0516a8)
Cc: stable@vger.kernel.org
Call pm_genpd_remove() to unregister from global list prior to releasing
acp_genpd memory, and clear the pointer after free.
Signed-off-by: Ce Sun <cesun102@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit cd8650d7a9)
Cc: stable@vger.kernel.org
When ACP soft reset poll times out, original code returns early without cleanup,
leaking MFD child devices, genpd links and all ACP heap allocations.
Replace direct early return with goto out to force run all cleanup logic
regardless of reset success, preserve timeout error code for caller.
Signed-off-by: Ce Sun <cesun102@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 98073e4328)
Cc: stable@vger.kernel.org
When creating an user-queue, the user space
provides a doorbell BO handle and an offset within
the bo to obtain a doorbell.
However current implementation using xa_store_irq()
to store a doorbell, which allows a later queue created
with the same BO and offset parameters to overwrite an
existing queue and doorbell mapping.
This can cause problems like misrouting fence IRQ
processing to a wrong queue, and mislead the cleanup
process of one queue erasing the mapping of another queue.
This commit fixes this issue by replacing xa_store_irq with
xa_insert_irq, which rejects mapping a reserved
doorbell to a newly created queue
Signed-off-by: Zhu Lingshan <lingshan.zhu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 6244eae229)
Cc: stable@vger.kernel.org
The mode-setting pipeline can disabled damage clippings for a commit
by setting ignore_damage_clips in struct drm_plane_state. The commit
will then do a full display update.
Test the flag in DCN code and do a full update in DCN code if it has
been set.
Commit 35ed38d582 ("drm: Allow drivers to indicate the damage helpers
to ignore damage clips") introduced ignore_damage_clips to selectively
ignore damage clipping in certain framebuffer changes. This driver does
not do that, but DRM's damage iterator will soon rely on the flag.
Therefore supporting it here as well make sense for consistency.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 35ed38d582 ("drm: Allow drivers to indicate the damage helpers to ignore damage clips")
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Zack Rusin <zackr@vmware.com>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit a24019f648)
Cc: <stable@vger.kernel.org> # v6.8+
Try KQ by ring_id first (KCQ and UQ never share a HW slot); fall back
to amdgpu_userq_process_fence_irq() on miss, since KCQ EOPs were
misrouted into the userq fence path when enable_mes is true.
Require a strict (me,pipe,queue) match in the gfx case, then userq gfx
EOPs fall through to amdgpu_userq_process_fence_irq().
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 6c1f4f7ff0)
Cc: stable@vger.kernel.org
Try KQ by ring_id first (KCQ and UQ never share a HW slot); fall back
to amdgpu_userq_process_fence_irq() on miss, since KQ EOPs were
misrouted into the userq fence path when enable_mes is true.
Require a strict (me,pipe,queue) match in the gfx case, then userq gfx
EOPs fall through to amdgpu_userq_process_fence_irq().
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 88e589cc81)
Cc: stable@vger.kernel.org
CRIU checkpoint copies the MQD control stack using cp_hqd_cntl_stack_size
from hardware without bounding it to the allocated BO region. If the HW
field is larger than the queue's control stack allocation, memcpy reads
past the BO into adjacent GTT memory and can leak kernel data to userspace.
Store the page-aligned control stack BO size in mqd_manager and clamp
checkpoint copies and reported checkpoint sizes to
min(cp_hqd_cntl_stack_size, mm->ctl_stack_size). Apply the same bound
for multi-XCC v9.4.3 checkpoint layout.
Signed-off-by: Yongqiang Sun <Yongqiang.Sun@amd.com>
Reviewed-by: David Francis <David.Francis@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 6c2abd0ec0)
Cc: stable@vger.kernel.org
amdgpu_pci_remove() calls drm_dev_unplug() before invoking the driver
fini routines. This causes drm_dev_enter() in amdgpu_ttm_fini() to
always return false, so iounmap(aper_base_kaddr) never runs on normal
driver unload, leaving an orphaned entry in the x86 PAT interval tree.
On connected_to_cpu hardware, the aperture is mapped write-back (WB) via
ioremap_cache(). On reload, IP discovery calls memremap(..., MEMREMAP_WC)
over the same range. The WC vs WB conflict causes:
ioremap error for 0x..., requested 0x1, got 0x0
amdgpu: discovery failed: -2
Fix by switching to devres-managed mappings so cleanup is guaranteed
regardless of drm_dev_enter() state:
- connected_to_cpu path: devm_memremap(MEMREMAP_WB). For
IORESOURCE_SYSTEM_RAM ranges this takes the try_ram_remap() shortcut,
returning __va(offset) from the existing kernel direct map. No new
ioremap VA or PAT entry is created, so there is nothing to orphan.
- dGPU path: devm_ioremap_wc() registers iounmap() as a devres action,
guaranteeing cleanup at device_del() time.
Also remove iounmap(aper_base_kaddr) from amdgpu_device_unmap_mmio()
since the mapping is now devres-owned.
v2: Remove redundant x86_64 guard (Lijo)
Fixes: 9d0af8b4de ("drm/amdgpu: pre-map device buffer as cached for A+A config")
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit d871e99879)
Cc: stable@vger.kernel.org
The function has two arrays on the stack to hold temporary dsc_optc_config
and dsc_config objects. The combination blows through common stack frame
warning limits in combination with the other local variables:
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:4070:22: error: stack frame size (1352) exceeds limit
(1280) in 'commit_planes_do_stream_update_sequence' [-Werror,-Wframe-larger-than]
Since neither array is initialized or used outside of the
add_link_update_dsc_config_sequence() function, there is no actual
need to keep each element around.
Replace the arrays with a single instance each to reduce the stack usage
to less than half.
Fixes: 9f49d3cd7e ("drm/amd/display: Implement block sequencing infrastructure for modular hardware operations.")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Acked-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 9e0896fa6f)
Cc: stable@vger.kernel.org
[why]
Some resources that exist in the DCN block are not needed and shouldn't
be used.
[how]
Remove defines from register lists.
Reviewed-by: Ovidiu (Ovi) Bunea <ovidiu.bunea@amd.com>
Signed-off-by: Matthew Stewart <Matthew.Stewart2@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit dac8aa629a)
[why]
The register lists used on DCN42 variants are different. Some reused
codepaths are trying to access registers not used.
[how]
Add DISPCLK_FREQ_CHANGECNTL, HUBPREQ_DEBUG, and HDMISTREAMCLK_CNTL to
the register lists.
Reviewed-by: Ovidiu (Ovi) Bunea <ovidiu.bunea@amd.com>
Signed-off-by: Matthew Stewart <Matthew.Stewart2@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 64142f9d51)
To avoid wraparound if the value is 0.
Signed-off-by: Xiaogang Chen <xiaogang.chen@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit c0cae35661)
Cc: stable@vger.kernel.org
Fix a security vulnerability where malicious VCE command streams
with oversized dimensions (e.g. 65536×65536) cause 32-bit integer
overflow, wrapping the calculated buffer size to 0. This bypasses
validation and allows GPU firmware to perform out-of-bound memory
access.
The fix uses 64-bit arithmetic to detect overflow and rejects
invalid dimensions before they reach the hardware.
V2: remove redundant check
V3: modify max height value
V4: remove size64
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit cbe408dba5)
Cc: stable@vger.kernel.org
Reuse the parameter length returned by
vcn_v4_0_enc_find_ib_param() instead of rereading it from
the IB.
This avoids a potential TOCTOU issue if the IB contents
change between reads.
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Reviewed-by: David Rosca <david.rosca@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit dbb02b4755)
Cc: stable@vger.kernel.org
When width or height is less than 16, width_in_mb or height_in_mb
becomes 0, leading to fs_in_mb being 0. This causes a division by
zero when calculating num_dpb_buffer in H264 and H264 Perf decode
paths.
Add validation to reject frames with width < 16 or height < 16
before performing any calculations that depend on these values.
V2: Format change - move up all vaiable definitions.
V3: Use warn_once to avoid spam.
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 3e41d26c70)
Cc: stable@vger.kernel.org
